| /*====================================================================== |
| |
| A driver for PCMCIA IDE/ATA disk cards |
| |
| The contents of this file are subject to the Mozilla Public |
| License Version 1.1 (the "License"); you may not use this file |
| except in compliance with the License. You may obtain a copy of |
| the License at http://www.mozilla.org/MPL/ |
| |
| Software distributed under the License is distributed on an "AS |
| IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or |
| implied. See the License for the specific language governing |
| rights and limitations under the License. |
| |
| The initial developer of the original code is David A. Hinds |
| <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| |
| Alternatively, the contents of this file may be used under the |
| terms of the GNU General Public License version 2 (the "GPL"), in |
| which case the provisions of the GPL are applicable instead of the |
| above. If you wish to allow the use of your version of this file |
| only under the terms of the GPL and not to allow others to use |
| your version of this file under the MPL, indicate your decision |
| by deleting the provisions above and replace them with the notice |
| and other provisions required by the GPL. If you do not delete |
| the provisions above, a recipient may use your version of this |
| file under either the MPL or the GPL. |
| |
| ======================================================================*/ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/ioport.h> |
| #include <linux/ide.h> |
| #include <linux/major.h> |
| #include <linux/delay.h> |
| #include <asm/io.h> |
| |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/ds.h> |
| #include <pcmcia/cisreg.h> |
| #include <pcmcia/ciscode.h> |
| |
| #define DRV_NAME "ide-cs" |
| |
| /*====================================================================*/ |
| |
| /* Module parameters */ |
| |
| MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); |
| MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver"); |
| MODULE_LICENSE("Dual MPL/GPL"); |
| |
| /*====================================================================*/ |
| |
| typedef struct ide_info_t { |
| struct pcmcia_device *p_dev; |
| struct ide_host *host; |
| int ndev; |
| } ide_info_t; |
| |
| static void ide_release(struct pcmcia_device *); |
| static int ide_config(struct pcmcia_device *); |
| |
| static void ide_detach(struct pcmcia_device *p_dev); |
| |
| static int ide_probe(struct pcmcia_device *link) |
| { |
| ide_info_t *info; |
| |
| dev_dbg(&link->dev, "ide_attach()\n"); |
| |
| /* Create new ide device */ |
| info = kzalloc(sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| info->p_dev = link; |
| link->priv = info; |
| |
| link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO | |
| CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; |
| |
| return ide_config(link); |
| } /* ide_attach */ |
| |
| static void ide_detach(struct pcmcia_device *link) |
| { |
| ide_info_t *info = link->priv; |
| |
| dev_dbg(&link->dev, "ide_detach(0x%p)\n", link); |
| |
| ide_release(link); |
| |
| kfree(info); |
| } /* ide_detach */ |
| |
| static const struct ide_port_ops idecs_port_ops = { |
| .quirkproc = ide_undecoded_slave, |
| }; |
| |
| static const struct ide_port_info idecs_port_info = { |
| .port_ops = &idecs_port_ops, |
| .host_flags = IDE_HFLAG_NO_DMA, |
| .irq_flags = IRQF_SHARED, |
| .chipset = ide_pci, |
| }; |
| |
| static struct ide_host *idecs_register(unsigned long io, unsigned long ctl, |
| unsigned long irq, struct pcmcia_device *handle) |
| { |
| struct ide_host *host; |
| ide_hwif_t *hwif; |
| int i, rc; |
| struct ide_hw hw, *hws[] = { &hw }; |
| |
| if (!request_region(io, 8, DRV_NAME)) { |
| printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n", |
| DRV_NAME, io, io + 7); |
| return NULL; |
| } |
| |
| if (!request_region(ctl, 1, DRV_NAME)) { |
| printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n", |
| DRV_NAME, ctl); |
| release_region(io, 8); |
| return NULL; |
| } |
| |
| memset(&hw, 0, sizeof(hw)); |
| ide_std_init_ports(&hw, io, ctl); |
| hw.irq = irq; |
| hw.dev = &handle->dev; |
| |
| rc = ide_host_add(&idecs_port_info, hws, 1, &host); |
| if (rc) |
| goto out_release; |
| |
| hwif = host->ports[0]; |
| |
| if (hwif->present) |
| return host; |
| |
| /* retry registration in case device is still spinning up */ |
| for (i = 0; i < 10; i++) { |
| msleep(100); |
| ide_port_scan(hwif); |
| if (hwif->present) |
| return host; |
| } |
| |
| return host; |
| |
| out_release: |
| release_region(ctl, 1); |
| release_region(io, 8); |
| return NULL; |
| } |
| |
| static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) |
| { |
| int *is_kme = priv_data; |
| |
| if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH) |
| != IO_DATA_PATH_WIDTH_8) { |
| pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; |
| pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; |
| } |
| pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; |
| pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; |
| |
| if (pdev->resource[1]->end) { |
| pdev->resource[0]->end = 8; |
| pdev->resource[1]->end = (*is_kme) ? 2 : 1; |
| } else { |
| if (pdev->resource[0]->end < 16) |
| return -ENODEV; |
| } |
| |
| return pcmcia_request_io(pdev); |
| } |
| |
| static int ide_config(struct pcmcia_device *link) |
| { |
| ide_info_t *info = link->priv; |
| int ret = 0, is_kme = 0; |
| unsigned long io_base, ctl_base; |
| struct ide_host *host; |
| |
| dev_dbg(&link->dev, "ide_config(0x%p)\n", link); |
| |
| is_kme = ((link->manf_id == MANFID_KME) && |
| ((link->card_id == PRODID_KME_KXLC005_A) || |
| (link->card_id == PRODID_KME_KXLC005_B))); |
| |
| if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) { |
| link->config_flags &= ~CONF_AUTO_CHECK_VCC; |
| if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) |
| goto failed; /* No suitable config found */ |
| } |
| io_base = link->resource[0]->start; |
| if (link->resource[1]->end) |
| ctl_base = link->resource[1]->start; |
| else |
| ctl_base = link->resource[0]->start + 0x0e; |
| |
| if (!link->irq) |
| goto failed; |
| |
| ret = pcmcia_enable_device(link); |
| if (ret) |
| goto failed; |
| |
| /* disable drive interrupts during IDE probe */ |
| outb(0x02, ctl_base); |
| |
| /* special setup for KXLC005 card */ |
| if (is_kme) |
| outb(0x81, ctl_base+1); |
| |
| host = idecs_register(io_base, ctl_base, link->irq, link); |
| if (host == NULL && resource_size(link->resource[0]) == 0x20) { |
| outb(0x02, ctl_base + 0x10); |
| host = idecs_register(io_base + 0x10, ctl_base + 0x10, |
| link->irq, link); |
| } |
| |
| if (host == NULL) |
| goto failed; |
| |
| info->ndev = 1; |
| info->host = host; |
| dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n", |
| 'a' + host->ports[0]->index * 2, |
| link->vpp / 10, link->vpp % 10); |
| |
| return 0; |
| |
| failed: |
| ide_release(link); |
| return -ENODEV; |
| } /* ide_config */ |
| |
| static void ide_release(struct pcmcia_device *link) |
| { |
| ide_info_t *info = link->priv; |
| struct ide_host *host = info->host; |
| |
| dev_dbg(&link->dev, "ide_release(0x%p)\n", link); |
| |
| if (info->ndev) { |
| ide_hwif_t *hwif = host->ports[0]; |
| unsigned long data_addr, ctl_addr; |
| |
| data_addr = hwif->io_ports.data_addr; |
| ctl_addr = hwif->io_ports.ctl_addr; |
| |
| ide_host_remove(host); |
| info->ndev = 0; |
| |
| release_region(ctl_addr, 1); |
| release_region(data_addr, 8); |
| } |
| |
| pcmcia_disable_device(link); |
| } /* ide_release */ |
| |
| |
| static const struct pcmcia_device_id ide_ids[] = { |
| PCMCIA_DEVICE_FUNC_ID(4), |
| PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */ |
| PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */ |
| PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */ |
| PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ |
| PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), |
| PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904), |
| PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ |
| PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ |
| PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */ |
| PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ |
| PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), |
| PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ |
| PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */ |
| PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001), |
| PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */ |
| PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */ |
| PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0), |
| PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74), |
| PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9), |
| PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591), |
| PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728), |
| PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591), |
| PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591), |
| PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4), |
| PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde), |
| PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf), |
| PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591), |
| PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728), |
| PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e), |
| PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae), |
| PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178), |
| PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), |
| PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), |
| PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), |
| PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), |
| PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), |
| PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), |
| PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), |
| PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), |
| PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), |
| PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), |
| PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), |
| PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), |
| PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), |
| PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), |
| PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728), |
| PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1), |
| PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883), |
| PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d), |
| PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), |
| PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), |
| PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), |
| PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), |
| PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), |
| PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), |
| PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), |
| PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), |
| PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), |
| PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), |
| PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), |
| PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), |
| PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), |
| PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), |
| PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506), |
| PCMCIA_DEVICE_NULL, |
| }; |
| MODULE_DEVICE_TABLE(pcmcia, ide_ids); |
| |
| static struct pcmcia_driver ide_cs_driver = { |
| .owner = THIS_MODULE, |
| .name = "ide-cs", |
| .probe = ide_probe, |
| .remove = ide_detach, |
| .id_table = ide_ids, |
| }; |
| |
| static int __init init_ide_cs(void) |
| { |
| return pcmcia_register_driver(&ide_cs_driver); |
| } |
| |
| static void __exit exit_ide_cs(void) |
| { |
| pcmcia_unregister_driver(&ide_cs_driver); |
| } |
| |
| late_initcall(init_ide_cs); |
| module_exit(exit_ide_cs); |