| /* |
| * Copyright 2012 Red Hat Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: Ben Skeggs |
| */ |
| #include "priv.h" |
| |
| int |
| gm100_identify(struct nvkm_device *device) |
| { |
| switch (device->chipset) { |
| case 0x117: |
| device->oclass[NVDEV_SUBDEV_GPIO ] = gk104_gpio_oclass; |
| device->oclass[NVDEV_SUBDEV_I2C ] = gf110_i2c_oclass; |
| device->oclass[NVDEV_SUBDEV_FUSE ] = &gm107_fuse_oclass; |
| device->oclass[NVDEV_SUBDEV_THERM ] = &gm107_therm_oclass; |
| device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass; |
| device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass; |
| device->oclass[NVDEV_SUBDEV_TIMER ] = &gk20a_timer_oclass; |
| device->oclass[NVDEV_SUBDEV_LTC ] = gm107_ltc_oclass; |
| device->oclass[NVDEV_SUBDEV_IBUS ] = &gk104_ibus_oclass; |
| device->oclass[NVDEV_SUBDEV_INSTMEM] = nv50_instmem_oclass; |
| device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass; |
| device->oclass[NVDEV_SUBDEV_PMU ] = gk208_pmu_oclass; |
| |
| #if 0 |
| device->oclass[NVDEV_SUBDEV_VOLT ] = &nv40_volt_oclass; |
| #endif |
| device->oclass[NVDEV_ENGINE_DMAOBJ ] = gf110_dmaeng_oclass; |
| device->oclass[NVDEV_ENGINE_FIFO ] = gk208_fifo_oclass; |
| device->oclass[NVDEV_ENGINE_SW ] = gf100_sw_oclass; |
| device->oclass[NVDEV_ENGINE_GR ] = gm107_gr_oclass; |
| device->oclass[NVDEV_ENGINE_DISP ] = gm107_disp_oclass; |
| device->oclass[NVDEV_ENGINE_CE0 ] = &gk104_ce0_oclass; |
| #if 0 |
| device->oclass[NVDEV_ENGINE_CE1 ] = &gk104_ce1_oclass; |
| #endif |
| device->oclass[NVDEV_ENGINE_CE2 ] = &gk104_ce2_oclass; |
| #if 0 |
| device->oclass[NVDEV_ENGINE_MSVLD ] = &gk104_msvld_oclass; |
| device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass; |
| device->oclass[NVDEV_ENGINE_MSPPP ] = &gf100_msppp_oclass; |
| #endif |
| break; |
| case 0x124: |
| device->oclass[NVDEV_SUBDEV_GPIO ] = gk104_gpio_oclass; |
| device->oclass[NVDEV_SUBDEV_I2C ] = gm204_i2c_oclass; |
| device->oclass[NVDEV_SUBDEV_FUSE ] = &gm107_fuse_oclass; |
| #if 0 |
| /* looks to be some non-trivial changes */ |
| /* priv ring says no to 0x10eb14 writes */ |
| device->oclass[NVDEV_SUBDEV_THERM ] = &gm107_therm_oclass; |
| #endif |
| device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass; |
| device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass; |
| device->oclass[NVDEV_SUBDEV_TIMER ] = &gk20a_timer_oclass; |
| device->oclass[NVDEV_SUBDEV_LTC ] = gm107_ltc_oclass; |
| device->oclass[NVDEV_SUBDEV_IBUS ] = &gk104_ibus_oclass; |
| device->oclass[NVDEV_SUBDEV_INSTMEM] = nv50_instmem_oclass; |
| device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass; |
| device->oclass[NVDEV_SUBDEV_PMU ] = gk208_pmu_oclass; |
| #if 0 |
| device->oclass[NVDEV_SUBDEV_VOLT ] = &nv40_volt_oclass; |
| #endif |
| device->oclass[NVDEV_ENGINE_DMAOBJ ] = gf110_dmaeng_oclass; |
| device->oclass[NVDEV_ENGINE_FIFO ] = gm204_fifo_oclass; |
| device->oclass[NVDEV_ENGINE_SW ] = gf100_sw_oclass; |
| device->oclass[NVDEV_ENGINE_GR ] = gm204_gr_oclass; |
| device->oclass[NVDEV_ENGINE_DISP ] = gm204_disp_oclass; |
| device->oclass[NVDEV_ENGINE_CE0 ] = &gm204_ce0_oclass; |
| device->oclass[NVDEV_ENGINE_CE1 ] = &gm204_ce1_oclass; |
| device->oclass[NVDEV_ENGINE_CE2 ] = &gm204_ce2_oclass; |
| #if 0 |
| device->oclass[NVDEV_ENGINE_MSVLD ] = &gk104_msvld_oclass; |
| device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass; |
| device->oclass[NVDEV_ENGINE_MSPPP ] = &gf100_msppp_oclass; |
| #endif |
| break; |
| case 0x126: |
| device->oclass[NVDEV_SUBDEV_GPIO ] = gk104_gpio_oclass; |
| device->oclass[NVDEV_SUBDEV_I2C ] = gm204_i2c_oclass; |
| device->oclass[NVDEV_SUBDEV_FUSE ] = &gm107_fuse_oclass; |
| #if 0 |
| /* looks to be some non-trivial changes */ |
| /* priv ring says no to 0x10eb14 writes */ |
| device->oclass[NVDEV_SUBDEV_THERM ] = &gm107_therm_oclass; |
| #endif |
| device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass; |
| device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass; |
| device->oclass[NVDEV_SUBDEV_TIMER ] = &gk20a_timer_oclass; |
| device->oclass[NVDEV_SUBDEV_LTC ] = gm107_ltc_oclass; |
| device->oclass[NVDEV_SUBDEV_IBUS ] = &gk104_ibus_oclass; |
| device->oclass[NVDEV_SUBDEV_INSTMEM] = nv50_instmem_oclass; |
| device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass; |
| device->oclass[NVDEV_SUBDEV_PMU ] = gk208_pmu_oclass; |
| #if 0 |
| device->oclass[NVDEV_SUBDEV_VOLT ] = &nv40_volt_oclass; |
| #endif |
| device->oclass[NVDEV_ENGINE_DMAOBJ ] = gf110_dmaeng_oclass; |
| device->oclass[NVDEV_ENGINE_FIFO ] = gm204_fifo_oclass; |
| device->oclass[NVDEV_ENGINE_SW ] = gf100_sw_oclass; |
| device->oclass[NVDEV_ENGINE_GR ] = gm206_gr_oclass; |
| device->oclass[NVDEV_ENGINE_DISP ] = gm204_disp_oclass; |
| device->oclass[NVDEV_ENGINE_CE0 ] = &gm204_ce0_oclass; |
| device->oclass[NVDEV_ENGINE_CE1 ] = &gm204_ce1_oclass; |
| device->oclass[NVDEV_ENGINE_CE2 ] = &gm204_ce2_oclass; |
| #if 0 |
| device->oclass[NVDEV_ENGINE_MSVLD ] = &gk104_msvld_oclass; |
| device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass; |
| device->oclass[NVDEV_ENGINE_MSPPP ] = &gf100_msppp_oclass; |
| #endif |
| break; |
| case 0x12b: |
| |
| device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass; |
| device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass; |
| device->oclass[NVDEV_SUBDEV_FUSE ] = &gm107_fuse_oclass; |
| device->oclass[NVDEV_SUBDEV_TIMER ] = &gk20a_timer_oclass; |
| device->oclass[NVDEV_SUBDEV_LTC ] = gm107_ltc_oclass; |
| device->oclass[NVDEV_SUBDEV_IBUS ] = &gk20a_ibus_oclass; |
| device->oclass[NVDEV_SUBDEV_INSTMEM] = gk20a_instmem_oclass; |
| device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass; |
| device->oclass[NVDEV_ENGINE_DMAOBJ ] = gf110_dmaeng_oclass; |
| device->oclass[NVDEV_ENGINE_FIFO ] = gm20b_fifo_oclass; |
| device->oclass[NVDEV_ENGINE_SW ] = gf100_sw_oclass; |
| device->oclass[NVDEV_ENGINE_GR ] = gm20b_gr_oclass; |
| device->oclass[NVDEV_ENGINE_CE2 ] = &gm204_ce2_oclass; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |