| /* |
| * linux/arch/arm/mach-integrator/integrator_ap.c |
| * |
| * Copyright (C) 2000-2003 Deep Blue Solutions Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/syscore_ops.h> |
| #include <linux/amba/bus.h> |
| #include <linux/amba/kmi.h> |
| #include <linux/clocksource.h> |
| #include <linux/clockchips.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/irqchip/versatile-fpga.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/clk.h> |
| #include <linux/platform_data/clk-integrator.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_address.h> |
| #include <linux/of_platform.h> |
| #include <linux/stat.h> |
| #include <linux/sys_soc.h> |
| #include <linux/termios.h> |
| #include <linux/sched_clock.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/platform.h> |
| #include <asm/hardware/arm_timer.h> |
| #include <asm/setup.h> |
| #include <asm/param.h> /* HZ */ |
| #include <asm/mach-types.h> |
| |
| #include <mach/lm.h> |
| |
| #include <asm/mach/arch.h> |
| #include <asm/mach/irq.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| |
| #include "cm.h" |
| #include "common.h" |
| #include "pci_v3.h" |
| |
| /* Base address to the AP system controller */ |
| void __iomem *ap_syscon_base; |
| |
| /* |
| * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx |
| * is the (PA >> 12). |
| * |
| * Setup a VA for the Integrator interrupt controller (for header #0, |
| * just for now). |
| */ |
| #define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE) |
| #define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE) |
| #define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC) |
| |
| /* |
| * Logical Physical |
| * ef000000 Cache flush |
| * f1000000 10000000 Core module registers |
| * f1100000 11000000 System controller registers |
| * f1200000 12000000 EBI registers |
| * f1300000 13000000 Counter/Timer |
| * f1400000 14000000 Interrupt controller |
| * f1600000 16000000 UART 0 |
| * f1700000 17000000 UART 1 |
| * f1a00000 1a000000 Debug LEDs |
| * f1b00000 1b000000 GPIO |
| */ |
| |
| static struct map_desc ap_io_desc[] __initdata __maybe_unused = { |
| { |
| .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), |
| .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE |
| }, { |
| .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), |
| .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE |
| }, { |
| .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE), |
| .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE |
| }, { |
| .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE), |
| .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE |
| }, { |
| .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE), |
| .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE |
| }, { |
| .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE), |
| .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE |
| }, { |
| .virtual = IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE), |
| .pfn = __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE), |
| .length = SZ_4K, |
| .type = MT_DEVICE |
| } |
| }; |
| |
| static void __init ap_map_io(void) |
| { |
| iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); |
| pci_v3_early_init(); |
| } |
| |
| #ifdef CONFIG_PM |
| static unsigned long ic_irq_enable; |
| |
| static int irq_suspend(void) |
| { |
| ic_irq_enable = readl(VA_IC_BASE + IRQ_ENABLE); |
| return 0; |
| } |
| |
| static void irq_resume(void) |
| { |
| /* disable all irq sources */ |
| cm_clear_irqs(); |
| writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR); |
| writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); |
| |
| writel(ic_irq_enable, VA_IC_BASE + IRQ_ENABLE_SET); |
| } |
| #else |
| #define irq_suspend NULL |
| #define irq_resume NULL |
| #endif |
| |
| static struct syscore_ops irq_syscore_ops = { |
| .suspend = irq_suspend, |
| .resume = irq_resume, |
| }; |
| |
| static int __init irq_syscore_init(void) |
| { |
| register_syscore_ops(&irq_syscore_ops); |
| |
| return 0; |
| } |
| |
| device_initcall(irq_syscore_init); |
| |
| /* |
| * Flash handling. |
| */ |
| #define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET) |
| #define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET) |
| |
| static int ap_flash_init(struct platform_device *dev) |
| { |
| u32 tmp; |
| |
| writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, |
| ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); |
| |
| tmp = readl(EBI_CSR1) | INTEGRATOR_EBI_WRITE_ENABLE; |
| writel(tmp, EBI_CSR1); |
| |
| if (!(readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE)) { |
| writel(0xa05f, EBI_LOCK); |
| writel(tmp, EBI_CSR1); |
| writel(0, EBI_LOCK); |
| } |
| return 0; |
| } |
| |
| static void ap_flash_exit(struct platform_device *dev) |
| { |
| u32 tmp; |
| |
| writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, |
| ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); |
| |
| tmp = readl(EBI_CSR1) & ~INTEGRATOR_EBI_WRITE_ENABLE; |
| writel(tmp, EBI_CSR1); |
| |
| if (readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE) { |
| writel(0xa05f, EBI_LOCK); |
| writel(tmp, EBI_CSR1); |
| writel(0, EBI_LOCK); |
| } |
| } |
| |
| static void ap_flash_set_vpp(struct platform_device *pdev, int on) |
| { |
| if (on) |
| writel(INTEGRATOR_SC_CTRL_nFLVPPEN, |
| ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET); |
| else |
| writel(INTEGRATOR_SC_CTRL_nFLVPPEN, |
| ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); |
| } |
| |
| static struct physmap_flash_data ap_flash_data = { |
| .width = 4, |
| .init = ap_flash_init, |
| .exit = ap_flash_exit, |
| .set_vpp = ap_flash_set_vpp, |
| }; |
| |
| /* |
| * For the PL010 found in the Integrator/AP some of the UART control is |
| * implemented in the system controller and accessed using a callback |
| * from the driver. |
| */ |
| static void integrator_uart_set_mctrl(struct amba_device *dev, |
| void __iomem *base, unsigned int mctrl) |
| { |
| unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; |
| u32 phybase = dev->res.start; |
| |
| if (phybase == INTEGRATOR_UART0_BASE) { |
| /* UART0 */ |
| rts_mask = 1 << 4; |
| dtr_mask = 1 << 5; |
| } else { |
| /* UART1 */ |
| rts_mask = 1 << 6; |
| dtr_mask = 1 << 7; |
| } |
| |
| if (mctrl & TIOCM_RTS) |
| ctrlc |= rts_mask; |
| else |
| ctrls |= rts_mask; |
| |
| if (mctrl & TIOCM_DTR) |
| ctrlc |= dtr_mask; |
| else |
| ctrls |= dtr_mask; |
| |
| __raw_writel(ctrls, ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET); |
| __raw_writel(ctrlc, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); |
| } |
| |
| struct amba_pl010_data ap_uart_data = { |
| .set_mctrl = integrator_uart_set_mctrl, |
| }; |
| |
| /* |
| * Where is the timer (VA)? |
| */ |
| #define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) |
| #define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE) |
| #define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE) |
| |
| static unsigned long timer_reload; |
| |
| static u32 notrace integrator_read_sched_clock(void) |
| { |
| return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE); |
| } |
| |
| static void integrator_clocksource_init(unsigned long inrate, |
| void __iomem *base) |
| { |
| u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; |
| unsigned long rate = inrate; |
| |
| if (rate >= 1500000) { |
| rate /= 16; |
| ctrl |= TIMER_CTRL_DIV16; |
| } |
| |
| writel(0xffff, base + TIMER_LOAD); |
| writel(ctrl, base + TIMER_CTRL); |
| |
| clocksource_mmio_init(base + TIMER_VALUE, "timer2", |
| rate, 200, 16, clocksource_mmio_readl_down); |
| setup_sched_clock(integrator_read_sched_clock, 16, rate); |
| } |
| |
| static void __iomem * clkevt_base; |
| |
| /* |
| * IRQ handler for the timer |
| */ |
| static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = dev_id; |
| |
| /* clear the interrupt */ |
| writel(1, clkevt_base + TIMER_INTCLR); |
| |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) |
| { |
| u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; |
| |
| /* Disable timer */ |
| writel(ctrl, clkevt_base + TIMER_CTRL); |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| /* Enable the timer and start the periodic tick */ |
| writel(timer_reload, clkevt_base + TIMER_LOAD); |
| ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; |
| writel(ctrl, clkevt_base + TIMER_CTRL); |
| break; |
| case CLOCK_EVT_MODE_ONESHOT: |
| /* Leave the timer disabled, .set_next_event will enable it */ |
| ctrl &= ~TIMER_CTRL_PERIODIC; |
| writel(ctrl, clkevt_base + TIMER_CTRL); |
| break; |
| case CLOCK_EVT_MODE_UNUSED: |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_RESUME: |
| default: |
| /* Just leave in disabled state */ |
| break; |
| } |
| |
| } |
| |
| static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt) |
| { |
| unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); |
| |
| writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); |
| writel(next, clkevt_base + TIMER_LOAD); |
| writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); |
| |
| return 0; |
| } |
| |
| static struct clock_event_device integrator_clockevent = { |
| .name = "timer1", |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, |
| .set_mode = clkevt_set_mode, |
| .set_next_event = clkevt_set_next_event, |
| .rating = 300, |
| }; |
| |
| static struct irqaction integrator_timer_irq = { |
| .name = "timer", |
| .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = integrator_timer_interrupt, |
| .dev_id = &integrator_clockevent, |
| }; |
| |
| static void integrator_clockevent_init(unsigned long inrate, |
| void __iomem *base, int irq) |
| { |
| unsigned long rate = inrate; |
| unsigned int ctrl = 0; |
| |
| clkevt_base = base; |
| /* Calculate and program a divisor */ |
| if (rate > 0x100000 * HZ) { |
| rate /= 256; |
| ctrl |= TIMER_CTRL_DIV256; |
| } else if (rate > 0x10000 * HZ) { |
| rate /= 16; |
| ctrl |= TIMER_CTRL_DIV16; |
| } |
| timer_reload = rate / HZ; |
| writel(ctrl, clkevt_base + TIMER_CTRL); |
| |
| setup_irq(irq, &integrator_timer_irq); |
| clockevents_config_and_register(&integrator_clockevent, |
| rate, |
| 1, |
| 0xffffU); |
| } |
| |
| void __init ap_init_early(void) |
| { |
| } |
| |
| static void __init ap_of_timer_init(void) |
| { |
| struct device_node *node; |
| const char *path; |
| void __iomem *base; |
| int err; |
| int irq; |
| struct clk *clk; |
| unsigned long rate; |
| |
| clk = clk_get_sys("ap_timer", NULL); |
| BUG_ON(IS_ERR(clk)); |
| clk_prepare_enable(clk); |
| rate = clk_get_rate(clk); |
| |
| err = of_property_read_string(of_aliases, |
| "arm,timer-primary", &path); |
| if (WARN_ON(err)) |
| return; |
| node = of_find_node_by_path(path); |
| base = of_iomap(node, 0); |
| if (WARN_ON(!base)) |
| return; |
| writel(0, base + TIMER_CTRL); |
| integrator_clocksource_init(rate, base); |
| |
| err = of_property_read_string(of_aliases, |
| "arm,timer-secondary", &path); |
| if (WARN_ON(err)) |
| return; |
| node = of_find_node_by_path(path); |
| base = of_iomap(node, 0); |
| if (WARN_ON(!base)) |
| return; |
| irq = irq_of_parse_and_map(node, 0); |
| writel(0, base + TIMER_CTRL); |
| integrator_clockevent_init(rate, base, irq); |
| } |
| |
| static const struct of_device_id fpga_irq_of_match[] __initconst = { |
| { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, |
| { /* Sentinel */ } |
| }; |
| |
| static void __init ap_init_irq_of(void) |
| { |
| cm_init(); |
| of_irq_init(fpga_irq_of_match); |
| integrator_clk_init(false); |
| } |
| |
| /* For the Device Tree, add in the UART callbacks as AUXDATA */ |
| static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = { |
| OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE, |
| "rtc", NULL), |
| OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE, |
| "uart0", &ap_uart_data), |
| OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE, |
| "uart1", &ap_uart_data), |
| OF_DEV_AUXDATA("arm,primecell", KMI0_BASE, |
| "kmi0", NULL), |
| OF_DEV_AUXDATA("arm,primecell", KMI1_BASE, |
| "kmi1", NULL), |
| OF_DEV_AUXDATA("cfi-flash", INTEGRATOR_FLASH_BASE, |
| "physmap-flash", &ap_flash_data), |
| { /* sentinel */ }, |
| }; |
| |
| static const struct of_device_id ap_syscon_match[] = { |
| { .compatible = "arm,integrator-ap-syscon"}, |
| { }, |
| }; |
| |
| static void __init ap_init_of(void) |
| { |
| unsigned long sc_dec; |
| struct device_node *root; |
| struct device_node *syscon; |
| struct device *parent; |
| struct soc_device *soc_dev; |
| struct soc_device_attribute *soc_dev_attr; |
| u32 ap_sc_id; |
| int err; |
| int i; |
| |
| /* Here we create an SoC device for the root node */ |
| root = of_find_node_by_path("/"); |
| if (!root) |
| return; |
| |
| syscon = of_find_matching_node(root, ap_syscon_match); |
| if (!syscon) |
| return; |
| |
| ap_syscon_base = of_iomap(syscon, 0); |
| if (!ap_syscon_base) |
| return; |
| |
| ap_sc_id = readl(ap_syscon_base); |
| |
| soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); |
| if (!soc_dev_attr) |
| return; |
| |
| err = of_property_read_string(root, "compatible", |
| &soc_dev_attr->soc_id); |
| if (err) |
| return; |
| err = of_property_read_string(root, "model", &soc_dev_attr->machine); |
| if (err) |
| return; |
| soc_dev_attr->family = "Integrator"; |
| soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c", |
| 'A' + (ap_sc_id & 0x0f)); |
| |
| soc_dev = soc_device_register(soc_dev_attr); |
| if (IS_ERR(soc_dev)) { |
| kfree(soc_dev_attr->revision); |
| kfree(soc_dev_attr); |
| return; |
| } |
| |
| parent = soc_device_to_device(soc_dev); |
| integrator_init_sysfs(parent, ap_sc_id); |
| |
| of_platform_populate(root, of_default_bus_match_table, |
| ap_auxdata_lookup, parent); |
| |
| sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); |
| for (i = 0; i < 4; i++) { |
| struct lm_device *lmdev; |
| |
| if ((sc_dec & (16 << i)) == 0) |
| continue; |
| |
| lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL); |
| if (!lmdev) |
| continue; |
| |
| lmdev->resource.start = 0xc0000000 + 0x10000000 * i; |
| lmdev->resource.end = lmdev->resource.start + 0x0fffffff; |
| lmdev->resource.flags = IORESOURCE_MEM; |
| lmdev->irq = irq_of_parse_and_map(syscon, i); |
| lmdev->id = i; |
| |
| lm_device_register(lmdev); |
| } |
| } |
| |
| static const char * ap_dt_board_compat[] = { |
| "arm,integrator-ap", |
| NULL, |
| }; |
| |
| DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") |
| .reserve = integrator_reserve, |
| .map_io = ap_map_io, |
| .init_early = ap_init_early, |
| .init_irq = ap_init_irq_of, |
| .handle_irq = fpga_handle_irq, |
| .init_time = ap_of_timer_init, |
| .init_machine = ap_init_of, |
| .restart = integrator_restart, |
| .dt_compat = ap_dt_board_compat, |
| MACHINE_END |