| Kernel driver dme1737 |
| ===================== |
| |
| Supported chips: |
| * SMSC DME1737 and compatibles (like Asus A8000) |
| Prefix: 'dme1737' |
| Addresses scanned: I2C 0x2c, 0x2d, 0x2e |
| Datasheet: Provided by SMSC upon request and under NDA |
| * SMSC SCH3112, SCH3114, SCH3116 |
| Prefix: 'sch311x' |
| Addresses scanned: none, address read from Super-I/O config space |
| Datasheet: Available on the Internet |
| * SMSC SCH5027 |
| Prefix: 'sch5027' |
| Addresses scanned: I2C 0x2c, 0x2d, 0x2e |
| Datasheet: Provided by SMSC upon request and under NDA |
| * SMSC SCH5127 |
| Prefix: 'sch5127' |
| Addresses scanned: none, address read from Super-I/O config space |
| Datasheet: Provided by SMSC upon request and under NDA |
| |
| Authors: |
| Juerg Haefliger <juergh@gmail.com> |
| |
| |
| Module Parameters |
| ----------------- |
| |
| * force_start: bool Enables the monitoring of voltage, fan and temp inputs |
| and PWM output control functions. Using this parameter |
| shouldn't be required since the BIOS usually takes care |
| of this. |
| * probe_all_addr: bool Include non-standard LPC addresses 0x162e and 0x164e |
| when probing for ISA devices. This is required for the |
| following boards: |
| - VIA EPIA SN18000 |
| |
| |
| Description |
| ----------- |
| |
| This driver implements support for the hardware monitoring capabilities of the |
| SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x, |
| and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors |
| temp[1-3] (2 remote diodes and 1 internal), 8 voltages in[0-7] (7 external and |
| 1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement |
| up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and |
| automatically. |
| |
| For the DME1737, A8000 and SCH5027, fan[1-2] and pwm[1-2] are always present. |
| Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on |
| the configuration of the chip. The driver will detect which features are |
| present during initialization and create the sysfs attributes accordingly. |
| |
| For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and |
| fan[4-6] and pwm[5-6] don't exist. |
| |
| The hardware monitoring features of the DME1737, A8000, and SCH5027 are only |
| accessible via SMBus, while the SCH311x and SCH5127 only provide access via |
| the ISA bus. The driver will therefore register itself as an I2C client driver |
| if it detects a DME1737, A8000, or SCH5027 and as a platform driver if it |
| detects a SCH311x or SCH5127 chip. |
| |
| |
| Voltage Monitoring |
| ------------------ |
| |
| The voltage inputs are sampled with 12-bit resolution and have internal |
| scaling resistors. The values returned by the driver therefore reflect true |
| millivolts and don't need scaling. The voltage inputs are mapped as follows |
| (the last column indicates the input ranges): |
| |
| DME1737, A8000: |
| in0: +5VTR (+5V standby) 0V - 6.64V |
| in1: Vccp (processor core) 0V - 3V |
| in2: VCC (internal +3.3V) 0V - 4.38V |
| in3: +5V 0V - 6.64V |
| in4: +12V 0V - 16V |
| in5: VTR (+3.3V standby) 0V - 4.38V |
| in6: Vbat (+3.0V) 0V - 4.38V |
| |
| SCH311x: |
| in0: +2.5V 0V - 3.32V |
| in1: Vccp (processor core) 0V - 2V |
| in2: VCC (internal +3.3V) 0V - 4.38V |
| in3: +5V 0V - 6.64V |
| in4: +12V 0V - 16V |
| in5: VTR (+3.3V standby) 0V - 4.38V |
| in6: Vbat (+3.0V) 0V - 4.38V |
| |
| SCH5027: |
| in0: +5VTR (+5V standby) 0V - 6.64V |
| in1: Vccp (processor core) 0V - 3V |
| in2: VCC (internal +3.3V) 0V - 4.38V |
| in3: V2_IN 0V - 1.5V |
| in4: V1_IN 0V - 1.5V |
| in5: VTR (+3.3V standby) 0V - 4.38V |
| in6: Vbat (+3.0V) 0V - 4.38V |
| |
| SCH5127: |
| in0: +2.5 0V - 3.32V |
| in1: Vccp (processor core) 0V - 3V |
| in2: VCC (internal +3.3V) 0V - 4.38V |
| in3: V2_IN 0V - 1.5V |
| in4: V1_IN 0V - 1.5V |
| in5: VTR (+3.3V standby) 0V - 4.38V |
| in6: Vbat (+3.0V) 0V - 4.38V |
| in7: Vtrip (+1.5V) 0V - 1.99V |
| |
| Each voltage input has associated min and max limits which trigger an alarm |
| when crossed. |
| |
| |
| Temperature Monitoring |
| ---------------------- |
| |
| Temperatures are measured with 12-bit resolution and reported in millidegree |
| Celsius. The chip also features offsets for all 3 temperature inputs which - |
| when programmed - get added to the input readings. The chip does all the |
| scaling by itself and the driver therefore reports true temperatures that don't |
| need any user-space adjustments. The temperature inputs are mapped as follows |
| (the last column indicates the input ranges): |
| |
| temp1: Remote diode 1 (3904 type) temperature -127C - +127C |
| temp2: DME1737 internal temperature -127C - +127C |
| temp3: Remote diode 2 (3904 type) temperature -127C - +127C |
| |
| Each temperature input has associated min and max limits which trigger an alarm |
| when crossed. Additionally, each temperature input has a fault attribute that |
| returns 1 when a faulty diode or an unconnected input is detected and 0 |
| otherwise. |
| |
| |
| Fan Monitoring |
| -------------- |
| |
| Fan RPMs are measured with 16-bit resolution. The chip provides inputs for 6 |
| fan tachometers. All 6 inputs have an associated min limit which triggers an |
| alarm when crossed. Fan inputs 1-4 provide type attributes that need to be set |
| to the number of pulses per fan revolution that the connected tachometer |
| generates. Supported values are 1, 2, and 4. Fan inputs 5-6 only support fans |
| that generate 2 pulses per revolution. Fan inputs 5-6 also provide a max |
| attribute that needs to be set to the maximum attainable RPM (fan at 100% duty- |
| cycle) of the input. The chip adjusts the sampling rate based on this value. |
| |
| |
| PWM Output Control |
| ------------------ |
| |
| This chip features 5 PWM outputs. PWM outputs 1-3 are associated with fan |
| inputs 1-3 and PWM outputs 5-6 are associated with fan inputs 5-6. PWM outputs |
| 1-3 can be configured to operate either in manual or automatic mode by setting |
| the appropriate enable attribute accordingly. PWM outputs 5-6 can only operate |
| in manual mode, their enable attributes are therefore read-only. When set to |
| manual mode, the fan speed is set by writing the duty-cycle value to the |
| appropriate PWM attribute. In automatic mode, the PWM attribute returns the |
| current duty-cycle as set by the fan controller in the chip. All PWM outputs |
| support the setting of the output frequency via the freq attribute. |
| |
| In automatic mode, the chip supports the setting of the PWM ramp rate which |
| defines how fast the PWM output is adjusting to changes of the associated |
| temperature input. Associating PWM outputs to temperature inputs is done via |
| temperature zones. The chip features 3 zones whose assignments to temperature |
| inputs is static and determined during initialization. These assignments can |
| be retrieved via the zone[1-3]_auto_channels_temp attributes. Each PWM output |
| is assigned to one (or hottest of multiple) temperature zone(s) through the |
| pwm[1-3]_auto_channels_zone attributes. Each PWM output has 3 distinct output |
| duty-cycles: full, low, and min. Full is internally hard-wired to 255 (100%) |
| and low and min can be programmed via pwm[1-3]_auto_point1_pwm and |
| pwm[1-3]_auto_pwm_min, respectively. The thermal thresholds of the zones are |
| programmed via zone[1-3]_auto_point[1-3]_temp and |
| zone[1-3]_auto_point1_temp_hyst: |
| |
| pwm[1-3]_auto_point2_pwm full-speed duty-cycle (255, i.e., 100%) |
| pwm[1-3]_auto_point1_pwm low-speed duty-cycle |
| pwm[1-3]_auto_pwm_min min-speed duty-cycle |
| |
| zone[1-3]_auto_point3_temp full-speed temp (all outputs) |
| zone[1-3]_auto_point2_temp full-speed temp |
| zone[1-3]_auto_point1_temp low-speed temp |
| zone[1-3]_auto_point1_temp_hyst min-speed temp |
| |
| The chip adjusts the output duty-cycle linearly in the range of auto_point1_pwm |
| to auto_point2_pwm if the temperature of the associated zone is between |
| auto_point1_temp and auto_point2_temp. If the temperature drops below the |
| auto_point1_temp_hyst value, the output duty-cycle is set to the auto_pwm_min |
| value which only supports two values: 0 or auto_point1_pwm. That means that the |
| fan either turns completely off or keeps spinning with the low-speed |
| duty-cycle. If any of the temperatures rise above the auto_point3_temp value, |
| all PWM outputs are set to 100% duty-cycle. |
| |
| Following is another representation of how the chip sets the output duty-cycle |
| based on the temperature of the associated thermal zone: |
| |
| Duty-Cycle Duty-Cycle |
| Temperature Rising Temp Falling Temp |
| ----------- ----------- ------------ |
| full-speed full-speed full-speed |
| |
| < linearly adjusted duty-cycle > |
| |
| low-speed low-speed low-speed |
| min-speed low-speed |
| min-speed min-speed min-speed |
| min-speed min-speed |
| |
| |
| Sysfs Attributes |
| ---------------- |
| |
| Following is a list of all sysfs attributes that the driver provides, their |
| permissions and a short description: |
| |
| Name Perm Description |
| ---- ---- ----------- |
| cpu0_vid RO CPU core reference voltage in |
| millivolts. |
| vrm RW Voltage regulator module version |
| number. |
| |
| in[0-7]_input RO Measured voltage in millivolts. |
| in[0-7]_min RW Low limit for voltage input. |
| in[0-7]_max RW High limit for voltage input. |
| in[0-7]_alarm RO Voltage input alarm. Returns 1 if |
| voltage input is or went outside the |
| associated min-max range, 0 otherwise. |
| |
| temp[1-3]_input RO Measured temperature in millidegree |
| Celsius. |
| temp[1-3]_min RW Low limit for temp input. |
| temp[1-3]_max RW High limit for temp input. |
| temp[1-3]_offset RW Offset for temp input. This value will |
| be added by the chip to the measured |
| temperature. |
| temp[1-3]_alarm RO Alarm for temp input. Returns 1 if temp |
| input is or went outside the associated |
| min-max range, 0 otherwise. |
| temp[1-3]_fault RO Temp input fault. Returns 1 if the chip |
| detects a faulty thermal diode or an |
| unconnected temp input, 0 otherwise. |
| |
| zone[1-3]_auto_channels_temp RO Temperature zone to temperature input |
| mapping. This attribute is a bitfield |
| and supports the following values: |
| 1: temp1 |
| 2: temp2 |
| 4: temp3 |
| zone[1-3]_auto_point1_temp_hyst RW Auto PWM temp point1 hysteresis. The |
| output of the corresponding PWM is set |
| to the pwm_auto_min value if the temp |
| falls below the auto_point1_temp_hyst |
| value. |
| zone[1-3]_auto_point[1-3]_temp RW Auto PWM temp points. Auto_point1 is |
| the low-speed temp, auto_point2 is the |
| full-speed temp, and auto_point3 is the |
| temp at which all PWM outputs are set |
| to full-speed (100% duty-cycle). |
| |
| fan[1-6]_input RO Measured fan speed in RPM. |
| fan[1-6]_min RW Low limit for fan input. |
| fan[1-6]_alarm RO Alarm for fan input. Returns 1 if fan |
| input is or went below the associated |
| min value, 0 otherwise. |
| fan[1-4]_type RW Type of attached fan. Expressed in |
| number of pulses per revolution that |
| the fan generates. Supported values are |
| 1, 2, and 4. |
| fan[5-6]_max RW Max attainable RPM at 100% duty-cycle. |
| Required for chip to adjust the |
| sampling rate accordingly. |
| |
| pmw[1-3,5-6] RO/RW Duty-cycle of PWM output. Supported |
| values are 0-255 (0%-100%). Only |
| writeable if the associated PWM is in |
| manual mode. |
| pwm[1-3]_enable RW Enable of PWM outputs 1-3. Supported |
| values are: |
| 0: turned off (output @ 100%) |
| 1: manual mode |
| 2: automatic mode |
| pwm[5-6]_enable RO Enable of PWM outputs 5-6. Always |
| returns 1 since these 2 outputs are |
| hard-wired to manual mode. |
| pmw[1-3,5-6]_freq RW Frequency of PWM output. Supported |
| values are in the range 11Hz-30000Hz |
| (default is 25000Hz). |
| pmw[1-3]_ramp_rate RW Ramp rate of PWM output. Determines how |
| fast the PWM duty-cycle will change |
| when the PWM is in automatic mode. |
| Expressed in ms per PWM step. Supported |
| values are in the range 0ms-206ms |
| (default is 0, which means the duty- |
| cycle changes instantly). |
| pwm[1-3]_auto_channels_zone RW PWM output to temperature zone mapping. |
| This attribute is a bitfield and |
| supports the following values: |
| 1: zone1 |
| 2: zone2 |
| 4: zone3 |
| 6: highest of zone[2-3] |
| 7: highest of zone[1-3] |
| pwm[1-3]_auto_pwm_min RW Auto PWM min pwm. Minimum PWM duty- |
| cycle. Supported values are 0 or |
| auto_point1_pwm. |
| pwm[1-3]_auto_point1_pwm RW Auto PWM pwm point. Auto_point1 is the |
| low-speed duty-cycle. |
| pwm[1-3]_auto_point2_pwm RO Auto PWM pwm point. Auto_point2 is the |
| full-speed duty-cycle which is hard- |
| wired to 255 (100% duty-cycle). |
| |
| Chip Differences |
| ---------------- |
| |
| Feature dme1737 sch311x sch5027 sch5127 |
| ------------------------------------------------------- |
| temp[1-3]_offset yes yes |
| vid yes |
| zone3 yes yes yes |
| zone[1-3]_hyst yes yes |
| pwm min/off yes yes |
| fan3 opt yes opt yes |
| pwm3 opt yes opt yes |
| fan4 opt opt |
| fan5 opt opt |
| pwm5 opt opt |
| fan6 opt opt |
| pwm6 opt opt |
| in7 yes |