arch/arm64/boot/dts/qcom/sdm845-qvr.dtsi - kernel/msm-4.9 - Gitiles

 /* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,camcc-sdm845.h>
 #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>

 #include "sdm845-pmic-overlay.dtsi"
 #include "sdm845-pinctrl-overlay.dtsi"

 &qupv3_se10_i2c {
 #include "smb1355.dtsi"
 };

 &vendor {
 	bluetooth: bt_wcn3990 {
 		compatible = "qca,wcn3990";
 		qca,bt-vdd-io-supply = <&pm8998_s3>;
 		qca,bt-vdd-xtal-supply = <&pm8998_s5>;
 		qca,bt-vdd-core-supply = <&pm8998_l7>;
 		qca,bt-vdd-pa-supply = <&pm8998_l17>;
 		qca,bt-vdd-ldo-supply = <&pm8998_l25>;

 		qca,bt-vdd-io-voltage-level = <1352000 1352000>;
 		qca,bt-vdd-xtal-voltage-level = <2040000 2040000>;
 		qca,bt-vdd-core-voltage-level = <1800000 1800000>;
 		qca,bt-vdd-pa-voltage-level = <1304000 1304000>;
 		qca,bt-vdd-ldo-voltage-level = <3312000 3312000>;

 		qca,bt-vdd-io-current-level = <1>; /* LPM/PFM */
 		qca,bt-vdd-xtal-current-level = <1>; /* LPM/PFM */
 		qca,bt-vdd-core-current-level = <1>; /* LPM/PFM */
 		qca,bt-vdd-pa-current-level = <1>; /* LPM/PFM */
 		qca,bt-vdd-ldo-current-level = <1>; /* LPM/PFM */
 	};

 	qvr_batterydata: qcom,battery-data {
 		qcom,batt-id-range-pct = <15>;
 		#include "fg-gen3-batterydata-mlp446579-3800mah.dtsi"
 	};
 };

 &pmi8998_pdphy {
 	vbus-supply = <&smb2_vbus>;
 };

 &qupv3_se6_4uart {
 	status = "ok";
 };

 &pmi8998_fg {
 	qcom,battery-data = <&qvr_batterydata>;
 	qcom,fg-bmd-en-delay-ms = <300>;
 };

 &pmi8998_charger {
 	qcom,battery-data = <&qvr_batterydata>;
 	qcom,sw-jeita-enable;
 };

 &qupv3_se3_i2c {
 	status = "ok";
 	nq@28 {
 		compatible = "qcom,nq-nci";
 		reg = <0x28>;
 		qcom,nq-irq = <&tlmm 63 0x00>;
 		qcom,nq-ven = <&tlmm 12 0x00>;
 		qcom,nq-firm = <&tlmm 62 0x00>;
 		qcom,nq-clkreq = <&pm8998_gpios 21 0x00>;
 		qcom,nq-esepwr = <&tlmm 116 0x00>;
 		interrupt-parent = <&tlmm>;
 		qcom,clk-src = "BBCLK3";
 		interrupts = <63 0>;
 		interrupt-names = "nfc_irq";
 		pinctrl-names = "nfc_active", "nfc_suspend";
 		pinctrl-0 = <&nfc_int_active
 			     &nfc_enable_active
 			     &nfc_clk_default>;
 		pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;
 		clocks = <&clock_rpmh RPMH_LN_BB_CLK3>;
 		clock-names = "ref_clk";
 	};
 };

 &qupv3_se10_i2c {
 	status = "ok";
 };

 &smb1355_charger_0 {
 	status = "ok";
 };

 &smb1355_charger_1 {
 	status = "ok";
 };

 &soc {
 	qcom,qbt1000 {
 		status = "disabled";
 	};

 	gpio_keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_vol_up_default
 			     &key_home_default>;

 		vol_up {
 			label = "volume_up";
 			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <115>;
 			gpio-key,wakeup;
 			debounce-interval = <15>;
 			linux,can-disable;
 		};

 		home {
 			label = "home";
 			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <102>;
 			gpio-key,wakeup;
 			debounce-interval = <15>;
 			linux,can-disable;
 		};
 	};
 };

 &qusb_phy0 {
 		qcom,qusb-phy-init-seq =
 			/* <value reg_offset> */
 			   <0x23 0x210 /* PWR_CTRL1 */
 			    0x03 0x04  /* PLL_ANALOG_CONTROLS_TWO */
 			    0x7c 0x18c /* PLL_CLOCK_INVERTERS */
 			    0x80 0x2c  /* PLL_CMODE */
 			    0x0a 0x184 /* PLL_LOCK_DELAY */
 			    0x19 0xb4  /* PLL_DIGITAL_TIMERS_TWO */
 			    0x40 0x194 /* PLL_BIAS_CONTROL_1 */
 			    0x20 0x198 /* PLL_BIAS_CONTROL_2 */
 			    0x21 0x214 /* PWR_CTRL2 */
 			    0x00 0x220 /* IMP_CTRL1 */
 			    0x58 0x224 /* IMP_CTRL2 */
 			    0x27 0x240 /* TUNE1 */
 			    0x29 0x244 /* TUNE2 */
 			    0xca 0x248 /* TUNE3 */
 			    0x04 0x24c /* TUNE4 */
 			    0x03 0x250 /* TUNE5 */
 			    0x00 0x23c /* CHG_CTRL2 */
 			    0x22 0x210>; /* PWR_CTRL1 */
 };

 &pmi8998_haptics {
 	qcom,vmax-mv = <1800>;
 	qcom,wave-play-rate-us = <4255>;
 	qcom,lra-auto-mode;
 	status = "okay";
 };

 &qupv3_se9_2uart {
 	status = "ok";
 };

 &ufsphy_mem {
 	compatible = "qcom,ufs-phy-qmp-v3";

 	vdda-phy-supply = <&pm8998_l1>; /* 0.88v */
 	vdda-pll-supply = <&pm8998_l26>; /* 1.2v */
 	vdda-phy-max-microamp = <62900>;
 	vdda-pll-max-microamp = <18300>;

 	status = "ok";
 };

 &ufshc_mem {
 	vdd-hba-supply = <&ufs_phy_gdsc>;
 	vdd-hba-fixed-regulator;
 	vcc-supply = <&pm8998_l20>;
 	vcc-voltage-level = <2950000 2960000>;
 	vccq2-supply = <&pm8998_s4>;
 	vcc-max-microamp = <600000>;
 	vccq2-max-microamp = <600000>;

 	qcom,vddp-ref-clk-supply = <&pm8998_l2>;
 	qcom,vddp-ref-clk-max-microamp = <100>;

 	status = "ok";
 };

 &sdhc_2 {
 	vdd-supply = <&pm8998_l21>;
 	qcom,vdd-voltage-level = <2950000 2960000>;
 	qcom,vdd-current-level = <200 800000>;

 	vdd-io-supply = <&pm8998_l13>;
 	qcom,vdd-io-voltage-level = <1808000 2960000>;
 	qcom,vdd-io-current-level = <200 22000>;

 	pinctrl-names = "active", "sleep";
 	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on &storage_cd>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &storage_cd>;

 	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;

 	status = "ok";
 };

 &wil6210 {
 	status = "ok";
 };

 &qupv3_se5_i2c {
 	status = "ok";
 	synaptics_dsx@20 {
 		compatible = "synaptics,dsx-i2c";
 		reg = <0x20>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <122 0x2008>;
 		vdd-supply = <&pm8998_l14>;
 		avdd-supply = <&pm8998_l28>;
 		pinctrl-names = "pmx_ts_active", "pmx_ts_suspend",
 				"pmx_ts_release";
 		pinctrl-0 = <&ts_int_active &ts_reset_active>;
 		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
 		pinctrl-2 = <&ts_release>;
 		synaptics,pwr-reg-name = "avdd";
 		synaptics,bus-reg-name = "vdd";
 		synaptics,ub-i2c-addr = <0x2c>;
 		synaptics,irq-gpio = <&tlmm 122 0x2008>;
 		synaptics,reset-gpio = <&tlmm 99 0x0>;
 		synaptics,irq-on-state = <0>;
 		synaptics,power-delay-ms = <200>;
 		synaptics,reset-delay-ms = <200>;
 		synaptics,reset-on-state = <0>;
 		synaptics,reset-active-ms = <20>;
 	};
 };
	/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <dt-bindings/clock/qcom,gcc-sdm845.h>
	#include <dt-bindings/clock/qcom,camcc-sdm845.h>
	#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
	#include <dt-bindings/clock/qcom,rpmh.h>
	#include <dt-bindings/interrupt-controller/arm-gic.h>

	#include "sdm845-pmic-overlay.dtsi"
	#include "sdm845-pinctrl-overlay.dtsi"

	&qupv3_se10_i2c {
	#include "smb1355.dtsi"
	};

	&vendor {
	bluetooth: bt_wcn3990 {
	compatible = "qca,wcn3990";
	qca,bt-vdd-io-supply = <&pm8998_s3>;
	qca,bt-vdd-xtal-supply = <&pm8998_s5>;
	qca,bt-vdd-core-supply = <&pm8998_l7>;
	qca,bt-vdd-pa-supply = <&pm8998_l17>;
	qca,bt-vdd-ldo-supply = <&pm8998_l25>;

	qca,bt-vdd-io-voltage-level = <1352000 1352000>;
	qca,bt-vdd-xtal-voltage-level = <2040000 2040000>;
	qca,bt-vdd-core-voltage-level = <1800000 1800000>;
	qca,bt-vdd-pa-voltage-level = <1304000 1304000>;
	qca,bt-vdd-ldo-voltage-level = <3312000 3312000>;

	qca,bt-vdd-io-current-level = <1>; /* LPM/PFM */
	qca,bt-vdd-xtal-current-level = <1>; /* LPM/PFM */
	qca,bt-vdd-core-current-level = <1>; /* LPM/PFM */
	qca,bt-vdd-pa-current-level = <1>; /* LPM/PFM */
	qca,bt-vdd-ldo-current-level = <1>; /* LPM/PFM */
	};

	qvr_batterydata: qcom,battery-data {
	qcom,batt-id-range-pct = <15>;
	#include "fg-gen3-batterydata-mlp446579-3800mah.dtsi"
	};
	};

	&pmi8998_pdphy {
	vbus-supply = <&smb2_vbus>;
	};

	&qupv3_se6_4uart {
	status = "ok";
	};

	&pmi8998_fg {
	qcom,battery-data = <&qvr_batterydata>;
	qcom,fg-bmd-en-delay-ms = <300>;
	};

	&pmi8998_charger {
	qcom,battery-data = <&qvr_batterydata>;
	qcom,sw-jeita-enable;
	};

	&qupv3_se3_i2c {
	status = "ok";
	nq@28 {
	compatible = "qcom,nq-nci";
	reg = <0x28>;
	qcom,nq-irq = <&tlmm 63 0x00>;
	qcom,nq-ven = <&tlmm 12 0x00>;
	qcom,nq-firm = <&tlmm 62 0x00>;
	qcom,nq-clkreq = <&pm8998_gpios 21 0x00>;
	qcom,nq-esepwr = <&tlmm 116 0x00>;
	interrupt-parent = <&tlmm>;
	qcom,clk-src = "BBCLK3";
	interrupts = <63 0>;
	interrupt-names = "nfc_irq";
	pinctrl-names = "nfc_active", "nfc_suspend";
	pinctrl-0 = <&nfc_int_active
	&nfc_enable_active
	&nfc_clk_default>;
	pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;
	clocks = <&clock_rpmh RPMH_LN_BB_CLK3>;
	clock-names = "ref_clk";
	};
	};

	&qupv3_se10_i2c {
	status = "ok";
	};

	&smb1355_charger_0 {
	status = "ok";
	};

	&smb1355_charger_1 {
	status = "ok";
	};

	&soc {
	qcom,qbt1000 {
	status = "disabled";
	};

	gpio_keys {
	compatible = "gpio-keys";
	label = "gpio-keys";
	pinctrl-names = "default";
	pinctrl-0 = <&key_vol_up_default
	&key_home_default>;

	vol_up {
	label = "volume_up";
	gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
	linux,input-type = <1>;
	linux,code = <115>;
	gpio-key,wakeup;
	debounce-interval = <15>;
	linux,can-disable;
	};

	home {
	label = "home";
	gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
	linux,input-type = <1>;
	linux,code = <102>;
	gpio-key,wakeup;
	debounce-interval = <15>;
	linux,can-disable;
	};
	};
	};

	&qusb_phy0 {
	qcom,qusb-phy-init-seq =
	/* <value reg_offset> */
	<0x23 0x210 /* PWR_CTRL1 */
	0x03 0x04 /* PLL_ANALOG_CONTROLS_TWO */
	0x7c 0x18c /* PLL_CLOCK_INVERTERS */
	0x80 0x2c /* PLL_CMODE */
	0x0a 0x184 /* PLL_LOCK_DELAY */
	0x19 0xb4 /* PLL_DIGITAL_TIMERS_TWO */
	0x40 0x194 /* PLL_BIAS_CONTROL_1 */
	0x20 0x198 /* PLL_BIAS_CONTROL_2 */
	0x21 0x214 /* PWR_CTRL2 */
	0x00 0x220 /* IMP_CTRL1 */
	0x58 0x224 /* IMP_CTRL2 */
	0x27 0x240 /* TUNE1 */
	0x29 0x244 /* TUNE2 */
	0xca 0x248 /* TUNE3 */
	0x04 0x24c /* TUNE4 */
	0x03 0x250 /* TUNE5 */
	0x00 0x23c /* CHG_CTRL2 */
	0x22 0x210>; /* PWR_CTRL1 */
	};

	&pmi8998_haptics {
	qcom,vmax-mv = <1800>;
	qcom,wave-play-rate-us = <4255>;
	qcom,lra-auto-mode;
	status = "okay";
	};

	&qupv3_se9_2uart {
	status = "ok";
	};

	&ufsphy_mem {
	compatible = "qcom,ufs-phy-qmp-v3";

	vdda-phy-supply = <&pm8998_l1>; /* 0.88v */
	vdda-pll-supply = <&pm8998_l26>; /* 1.2v */
	vdda-phy-max-microamp = <62900>;
	vdda-pll-max-microamp = <18300>;

	status = "ok";
	};

	&ufshc_mem {
	vdd-hba-supply = <&ufs_phy_gdsc>;
	vdd-hba-fixed-regulator;
	vcc-supply = <&pm8998_l20>;
	vcc-voltage-level = <2950000 2960000>;
	vccq2-supply = <&pm8998_s4>;
	vcc-max-microamp = <600000>;
	vccq2-max-microamp = <600000>;

	qcom,vddp-ref-clk-supply = <&pm8998_l2>;
	qcom,vddp-ref-clk-max-microamp = <100>;

	status = "ok";
	};

	&sdhc_2 {
	vdd-supply = <&pm8998_l21>;
	qcom,vdd-voltage-level = <2950000 2960000>;
	qcom,vdd-current-level = <200 800000>;

	vdd-io-supply = <&pm8998_l13>;
	qcom,vdd-io-voltage-level = <1808000 2960000>;
	qcom,vdd-io-current-level = <200 22000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &storage_cd>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &storage_cd>;

	cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;

	status = "ok";
	};

	&wil6210 {
	status = "ok";
	};

	&qupv3_se5_i2c {
	status = "ok";
	synaptics_dsx@20 {
	compatible = "synaptics,dsx-i2c";
	reg = <0x20>;
	interrupt-parent = <&tlmm>;
	interrupts = <122 0x2008>;
	vdd-supply = <&pm8998_l14>;
	avdd-supply = <&pm8998_l28>;
	pinctrl-names = "pmx_ts_active", "pmx_ts_suspend",
	"pmx_ts_release";
	pinctrl-0 = <&ts_int_active &ts_reset_active>;
	pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
	pinctrl-2 = <&ts_release>;
	synaptics,pwr-reg-name = "avdd";
	synaptics,bus-reg-name = "vdd";
	synaptics,ub-i2c-addr = <0x2c>;
	synaptics,irq-gpio = <&tlmm 122 0x2008>;
	synaptics,reset-gpio = <&tlmm 99 0x0>;
	synaptics,irq-on-state = <0>;
	synaptics,power-delay-ms = <200>;
	synaptics,reset-delay-ms = <200>;
	synaptics,reset-on-state = <0>;
	synaptics,reset-active-ms = <20>;
	};
	};