| /* |
| * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/mfd/anatop.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| struct anatop_regulator { |
| const char *name; |
| u32 control_reg; |
| struct anatop *mfd; |
| int vol_bit_shift; |
| int vol_bit_width; |
| int min_bit_val; |
| int min_voltage; |
| int max_voltage; |
| struct regulator_desc rdesc; |
| struct regulator_init_data *initdata; |
| }; |
| |
| static int anatop_set_voltage_sel(struct regulator_dev *reg, unsigned selector) |
| { |
| struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); |
| u32 val, mask; |
| |
| if (!anatop_reg->control_reg) |
| return -ENOTSUPP; |
| |
| val = anatop_reg->min_bit_val + selector; |
| dev_dbg(®->dev, "%s: calculated val %d\n", __func__, val); |
| mask = ((1 << anatop_reg->vol_bit_width) - 1) << |
| anatop_reg->vol_bit_shift; |
| val <<= anatop_reg->vol_bit_shift; |
| anatop_write_reg(anatop_reg->mfd, anatop_reg->control_reg, val, mask); |
| |
| return 0; |
| } |
| |
| static int anatop_get_voltage_sel(struct regulator_dev *reg) |
| { |
| struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); |
| u32 val; |
| |
| if (!anatop_reg->control_reg) |
| return -ENOTSUPP; |
| |
| val = anatop_read_reg(anatop_reg->mfd, anatop_reg->control_reg); |
| val = (val & ((1 << anatop_reg->vol_bit_width) - 1)) >> |
| anatop_reg->vol_bit_shift; |
| |
| return val - anatop_reg->min_bit_val; |
| } |
| |
| static struct regulator_ops anatop_rops = { |
| .set_voltage_sel = anatop_set_voltage_sel, |
| .get_voltage_sel = anatop_get_voltage_sel, |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| }; |
| |
| static int __devinit anatop_regulator_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct regulator_desc *rdesc; |
| struct regulator_dev *rdev; |
| struct anatop_regulator *sreg; |
| struct regulator_init_data *initdata; |
| struct anatop *anatopmfd = dev_get_drvdata(pdev->dev.parent); |
| struct regulator_config config = { }; |
| int ret = 0; |
| |
| initdata = of_get_regulator_init_data(dev, np); |
| sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL); |
| if (!sreg) |
| return -ENOMEM; |
| sreg->initdata = initdata; |
| sreg->name = kstrdup(of_get_property(np, "regulator-name", NULL), |
| GFP_KERNEL); |
| rdesc = &sreg->rdesc; |
| memset(rdesc, 0, sizeof(*rdesc)); |
| rdesc->name = sreg->name; |
| rdesc->ops = &anatop_rops; |
| rdesc->type = REGULATOR_VOLTAGE; |
| rdesc->owner = THIS_MODULE; |
| sreg->mfd = anatopmfd; |
| ret = of_property_read_u32(np, "anatop-reg-offset", |
| &sreg->control_reg); |
| if (ret) { |
| dev_err(dev, "no anatop-reg-offset property set\n"); |
| goto anatop_probe_end; |
| } |
| ret = of_property_read_u32(np, "anatop-vol-bit-width", |
| &sreg->vol_bit_width); |
| if (ret) { |
| dev_err(dev, "no anatop-vol-bit-width property set\n"); |
| goto anatop_probe_end; |
| } |
| ret = of_property_read_u32(np, "anatop-vol-bit-shift", |
| &sreg->vol_bit_shift); |
| if (ret) { |
| dev_err(dev, "no anatop-vol-bit-shift property set\n"); |
| goto anatop_probe_end; |
| } |
| ret = of_property_read_u32(np, "anatop-min-bit-val", |
| &sreg->min_bit_val); |
| if (ret) { |
| dev_err(dev, "no anatop-min-bit-val property set\n"); |
| goto anatop_probe_end; |
| } |
| ret = of_property_read_u32(np, "anatop-min-voltage", |
| &sreg->min_voltage); |
| if (ret) { |
| dev_err(dev, "no anatop-min-voltage property set\n"); |
| goto anatop_probe_end; |
| } |
| ret = of_property_read_u32(np, "anatop-max-voltage", |
| &sreg->max_voltage); |
| if (ret) { |
| dev_err(dev, "no anatop-max-voltage property set\n"); |
| goto anatop_probe_end; |
| } |
| |
| rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) |
| / 25000 + 1; |
| rdesc->min_uV = sreg->min_voltage; |
| rdesc->uV_step = 25000; |
| |
| config.dev = &pdev->dev; |
| config.init_data = initdata; |
| config.driver_data = sreg; |
| config.of_node = pdev->dev.of_node; |
| |
| /* register regulator */ |
| rdev = regulator_register(rdesc, &config); |
| if (IS_ERR(rdev)) { |
| dev_err(dev, "failed to register %s\n", |
| rdesc->name); |
| ret = PTR_ERR(rdev); |
| goto anatop_probe_end; |
| } |
| |
| platform_set_drvdata(pdev, rdev); |
| |
| anatop_probe_end: |
| if (ret) |
| kfree(sreg->name); |
| |
| return ret; |
| } |
| |
| static int __devexit anatop_regulator_remove(struct platform_device *pdev) |
| { |
| struct regulator_dev *rdev = platform_get_drvdata(pdev); |
| struct anatop_regulator *sreg = rdev_get_drvdata(rdev); |
| const char *name = sreg->name; |
| |
| regulator_unregister(rdev); |
| kfree(name); |
| |
| return 0; |
| } |
| |
| static struct of_device_id __devinitdata of_anatop_regulator_match_tbl[] = { |
| { .compatible = "fsl,anatop-regulator", }, |
| { /* end */ } |
| }; |
| |
| static struct platform_driver anatop_regulator_driver = { |
| .driver = { |
| .name = "anatop_regulator", |
| .owner = THIS_MODULE, |
| .of_match_table = of_anatop_regulator_match_tbl, |
| }, |
| .probe = anatop_regulator_probe, |
| .remove = __devexit_p(anatop_regulator_remove), |
| }; |
| |
| static int __init anatop_regulator_init(void) |
| { |
| return platform_driver_register(&anatop_regulator_driver); |
| } |
| postcore_initcall(anatop_regulator_init); |
| |
| static void __exit anatop_regulator_exit(void) |
| { |
| platform_driver_unregister(&anatop_regulator_driver); |
| } |
| module_exit(anatop_regulator_exit); |
| |
| MODULE_AUTHOR("Nancy Chen <Nancy.Chen@freescale.com>, " |
| "Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>"); |
| MODULE_DESCRIPTION("ANATOP Regulator driver"); |
| MODULE_LICENSE("GPL v2"); |