| /* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef _SDE_HW_SSPP_H |
| #define _SDE_HW_SSPP_H |
| |
| #include "sde_hw_catalog.h" |
| #include "sde_hw_mdss.h" |
| #include "sde_hw_util.h" |
| #include "sde_hw_blk.h" |
| #include "sde_formats.h" |
| #include "sde_color_processing.h" |
| |
| struct sde_hw_pipe; |
| |
| /** |
| * Flags |
| */ |
| #define SDE_SSPP_SECURE_OVERLAY_SESSION 0x1 |
| #define SDE_SSPP_FLIP_LR 0x2 |
| #define SDE_SSPP_FLIP_UD 0x4 |
| #define SDE_SSPP_SOURCE_ROTATED_90 0x8 |
| #define SDE_SSPP_ROT_90 0x10 |
| #define SDE_SSPP_SOLID_FILL 0x20 |
| |
| /** |
| * Define all scaler feature bits in catalog |
| */ |
| #define SDE_SSPP_SCALER ((1UL << SDE_SSPP_SCALER_RGB) | \ |
| (1UL << SDE_SSPP_SCALER_QSEED2) | \ |
| (1UL << SDE_SSPP_SCALER_QSEED3)) |
| |
| /** |
| * Component indices |
| */ |
| enum { |
| SDE_SSPP_COMP_0, |
| SDE_SSPP_COMP_1_2, |
| SDE_SSPP_COMP_2, |
| SDE_SSPP_COMP_3, |
| |
| SDE_SSPP_COMP_MAX |
| }; |
| |
| /** |
| * SDE_SSPP_RECT_SOLO - multirect disabled |
| * SDE_SSPP_RECT_0 - rect0 of a multirect pipe |
| * SDE_SSPP_RECT_1 - rect1 of a multirect pipe |
| * |
| * Note: HW supports multirect with either RECT0 or |
| * RECT1. Considering no benefit of such configs over |
| * SOLO mode and to keep the plane management simple, |
| * we dont support single rect multirect configs. |
| */ |
| enum sde_sspp_multirect_index { |
| SDE_SSPP_RECT_SOLO = 0, |
| SDE_SSPP_RECT_0, |
| SDE_SSPP_RECT_1, |
| }; |
| |
| enum sde_sspp_multirect_mode { |
| SDE_SSPP_MULTIRECT_NONE = 0, |
| SDE_SSPP_MULTIRECT_PARALLEL, |
| SDE_SSPP_MULTIRECT_TIME_MX, |
| }; |
| |
| enum { |
| SDE_FRAME_LINEAR, |
| SDE_FRAME_TILE_A4X, |
| SDE_FRAME_TILE_A5X, |
| }; |
| |
| enum sde_hw_filter { |
| SDE_SCALE_FILTER_NEAREST = 0, |
| SDE_SCALE_FILTER_BIL, |
| SDE_SCALE_FILTER_PCMN, |
| SDE_SCALE_FILTER_CA, |
| SDE_SCALE_FILTER_MAX |
| }; |
| |
| enum sde_hw_filter_alpa { |
| SDE_SCALE_ALPHA_PIXEL_REP, |
| SDE_SCALE_ALPHA_BIL |
| }; |
| |
| enum sde_hw_filter_yuv { |
| SDE_SCALE_2D_4X4, |
| SDE_SCALE_2D_CIR, |
| SDE_SCALE_1D_SEP, |
| SDE_SCALE_BIL |
| }; |
| |
| struct sde_hw_sharp_cfg { |
| u32 strength; |
| u32 edge_thr; |
| u32 smooth_thr; |
| u32 noise_thr; |
| }; |
| |
| struct sde_hw_pixel_ext { |
| /* scaling factors are enabled for this input layer */ |
| uint8_t enable_pxl_ext; |
| |
| int init_phase_x[SDE_MAX_PLANES]; |
| int phase_step_x[SDE_MAX_PLANES]; |
| int init_phase_y[SDE_MAX_PLANES]; |
| int phase_step_y[SDE_MAX_PLANES]; |
| |
| /* |
| * Number of pixels extension in left, right, top and bottom direction |
| * for all color components. This pixel value for each color component |
| * should be sum of fetch + repeat pixels. |
| */ |
| int num_ext_pxls_left[SDE_MAX_PLANES]; |
| int num_ext_pxls_right[SDE_MAX_PLANES]; |
| int num_ext_pxls_top[SDE_MAX_PLANES]; |
| int num_ext_pxls_btm[SDE_MAX_PLANES]; |
| |
| /* |
| * Number of pixels needs to be overfetched in left, right, top and |
| * bottom directions from source image for scaling. |
| */ |
| int left_ftch[SDE_MAX_PLANES]; |
| int right_ftch[SDE_MAX_PLANES]; |
| int top_ftch[SDE_MAX_PLANES]; |
| int btm_ftch[SDE_MAX_PLANES]; |
| |
| /* |
| * Number of pixels needs to be repeated in left, right, top and |
| * bottom directions for scaling. |
| */ |
| int left_rpt[SDE_MAX_PLANES]; |
| int right_rpt[SDE_MAX_PLANES]; |
| int top_rpt[SDE_MAX_PLANES]; |
| int btm_rpt[SDE_MAX_PLANES]; |
| |
| uint32_t roi_w[SDE_MAX_PLANES]; |
| uint32_t roi_h[SDE_MAX_PLANES]; |
| |
| /* |
| * Filter type to be used for scaling in horizontal and vertical |
| * directions |
| */ |
| enum sde_hw_filter horz_filter[SDE_MAX_PLANES]; |
| enum sde_hw_filter vert_filter[SDE_MAX_PLANES]; |
| |
| }; |
| |
| /** |
| * struct sde_hw_scaler3_de_cfg : QSEEDv3 detail enhancer configuration |
| * @enable: detail enhancer enable/disable |
| * @sharpen_level1: sharpening strength for noise |
| * @sharpen_level2: sharpening strength for signal |
| * @ clip: clip shift |
| * @ limit: limit value |
| * @ thr_quiet: quiet threshold |
| * @ thr_dieout: dieout threshold |
| * @ thr_high: low threshold |
| * @ thr_high: high threshold |
| * @ prec_shift: precision shift |
| * @ adjust_a: A-coefficients for mapping curve |
| * @ adjust_b: B-coefficients for mapping curve |
| * @ adjust_c: C-coefficients for mapping curve |
| */ |
| struct sde_hw_scaler3_de_cfg { |
| u32 enable; |
| int16_t sharpen_level1; |
| int16_t sharpen_level2; |
| uint16_t clip; |
| uint16_t limit; |
| uint16_t thr_quiet; |
| uint16_t thr_dieout; |
| uint16_t thr_low; |
| uint16_t thr_high; |
| uint16_t prec_shift; |
| int16_t adjust_a[SDE_MAX_DE_CURVES]; |
| int16_t adjust_b[SDE_MAX_DE_CURVES]; |
| int16_t adjust_c[SDE_MAX_DE_CURVES]; |
| }; |
| |
| /** |
| * struct sde_hw_scaler3_cfg : QSEEDv3 configuration |
| * @enable: scaler enable |
| * @dir_en: direction detection block enable |
| * @ init_phase_x: horizontal initial phase |
| * @ phase_step_x: horizontal phase step |
| * @ init_phase_y: vertical initial phase |
| * @ phase_step_y: vertical phase step |
| * @ preload_x: horizontal preload value |
| * @ preload_y: vertical preload value |
| * @ src_width: source width |
| * @ src_height: source height |
| * @ dst_width: destination width |
| * @ dst_height: destination height |
| * @ y_rgb_filter_cfg: y/rgb plane filter configuration |
| * @ uv_filter_cfg: uv plane filter configuration |
| * @ alpha_filter_cfg: alpha filter configuration |
| * @ blend_cfg: blend coefficients configuration |
| * @ lut_flag: scaler LUT update flags |
| * 0x1 swap LUT bank |
| * 0x2 update 2D filter LUT |
| * 0x4 update y circular filter LUT |
| * 0x8 update uv circular filter LUT |
| * 0x10 update y separable filter LUT |
| * 0x20 update uv separable filter LUT |
| * @ dir_lut_idx: 2D filter LUT index |
| * @ y_rgb_cir_lut_idx: y circular filter LUT index |
| * @ uv_cir_lut_idx: uv circular filter LUT index |
| * @ y_rgb_sep_lut_idx: y circular filter LUT index |
| * @ uv_sep_lut_idx: uv separable filter LUT index |
| * @ dir_lut: pointer to 2D LUT |
| * @ cir_lut: pointer to circular filter LUT |
| * @ sep_lut: pointer to separable filter LUT |
| * @ de: detail enhancer configuration |
| */ |
| struct sde_hw_scaler3_cfg { |
| u32 enable; |
| u32 dir_en; |
| int32_t init_phase_x[SDE_MAX_PLANES]; |
| int32_t phase_step_x[SDE_MAX_PLANES]; |
| int32_t init_phase_y[SDE_MAX_PLANES]; |
| int32_t phase_step_y[SDE_MAX_PLANES]; |
| |
| u32 preload_x[SDE_MAX_PLANES]; |
| u32 preload_y[SDE_MAX_PLANES]; |
| u32 src_width[SDE_MAX_PLANES]; |
| u32 src_height[SDE_MAX_PLANES]; |
| |
| u32 dst_width; |
| u32 dst_height; |
| |
| u32 y_rgb_filter_cfg; |
| u32 uv_filter_cfg; |
| u32 alpha_filter_cfg; |
| u32 blend_cfg; |
| |
| u32 lut_flag; |
| u32 dir_lut_idx; |
| |
| u32 y_rgb_cir_lut_idx; |
| u32 uv_cir_lut_idx; |
| u32 y_rgb_sep_lut_idx; |
| u32 uv_sep_lut_idx; |
| u32 *dir_lut; |
| size_t dir_len; |
| u32 *cir_lut; |
| size_t cir_len; |
| u32 *sep_lut; |
| size_t sep_len; |
| |
| /* |
| * Detail enhancer settings |
| */ |
| struct sde_hw_scaler3_de_cfg de; |
| }; |
| |
| /** |
| * struct sde_hw_pipe_cfg : Pipe description |
| * @layout: format layout information for programming buffer to hardware |
| * @src_rect: src ROI, caller takes into account the different operations |
| * such as decimation, flip etc to program this field |
| * @dest_rect: destination ROI. |
| * @ horz_decimation : horizontal decimation factor( 0, 2, 4, 8, 16) |
| * @ vert_decimation : vertical decimation factor( 0, 2, 4, 8, 16) |
| * 2: Read 1 line/pixel drop 1 line/pixel |
| * 4: Read 1 line/pixel drop 3 lines/pixels |
| * 8: Read 1 line/pixel drop 7 lines/pixels |
| * 16: Read 1 line/pixel drop 15 line/pixels |
| * @index: index of the rectangle of SSPP |
| * @mode: parallel or time multiplex multirect mode |
| */ |
| struct sde_hw_pipe_cfg { |
| struct sde_hw_fmt_layout layout; |
| struct sde_rect src_rect; |
| struct sde_rect dst_rect; |
| u8 horz_decimation; |
| u8 vert_decimation; |
| enum sde_sspp_multirect_index index; |
| enum sde_sspp_multirect_mode mode; |
| }; |
| |
| /** |
| * struct sde_hw_pipe_qos_cfg : Source pipe QoS configuration |
| * @danger_lut: LUT for generate danger level based on fill level |
| * @safe_lut: LUT for generate safe level based on fill level |
| * @creq_lut: LUT for generate creq level based on fill level |
| * @creq_vblank: creq value generated to vbif during vertical blanking |
| * @danger_vblank: danger value generated during vertical blanking |
| * @vblank_en: enable creq_vblank and danger_vblank during vblank |
| * @danger_safe_en: enable danger safe generation |
| */ |
| struct sde_hw_pipe_qos_cfg { |
| u32 danger_lut; |
| u32 safe_lut; |
| u64 creq_lut; |
| u32 creq_vblank; |
| u32 danger_vblank; |
| bool vblank_en; |
| bool danger_safe_en; |
| }; |
| |
| /** |
| * enum CDP preload ahead address size |
| */ |
| enum { |
| SDE_SSPP_CDP_PRELOAD_AHEAD_32, |
| SDE_SSPP_CDP_PRELOAD_AHEAD_64 |
| }; |
| |
| /** |
| * struct sde_hw_pipe_cdp_cfg : CDP configuration |
| * @enable: true to enable CDP |
| * @ubwc_meta_enable: true to enable ubwc metadata preload |
| * @tile_amortize_enable: true to enable amortization control for tile format |
| * @preload_ahead: number of request to preload ahead |
| * SDE_SSPP_CDP_PRELOAD_AHEAD_32, |
| * SDE_SSPP_CDP_PRELOAD_AHEAD_64 |
| */ |
| struct sde_hw_pipe_cdp_cfg { |
| bool enable; |
| bool ubwc_meta_enable; |
| bool tile_amortize_enable; |
| u32 preload_ahead; |
| }; |
| |
| /** |
| * enum system cache rotation operation mode |
| */ |
| enum { |
| SDE_PIPE_SC_OP_MODE_OFFLINE, |
| SDE_PIPE_SC_OP_MODE_INLINE_SINGLE, |
| SDE_PIPE_SC_OP_MODE_INLINE_LEFT, |
| SDE_PIPE_SC_OP_MODE_INLINE_RIGHT, |
| }; |
| |
| /** |
| * enum system cache read operation type |
| */ |
| enum { |
| SDE_PIPE_SC_RD_OP_TYPE_CACHEABLE, |
| SDE_PIPE_SC_RD_OP_TYPE_INVALIDATE, |
| SDE_PIPE_SC_RD_OP_TYPE_EVICTION, |
| }; |
| |
| /** |
| * struct sde_hw_pipe_sc_cfg - system cache configuration |
| * @op_mode: rotation operating mode |
| * @rd_en: system cache read enable |
| * @rd_scid: system cache read block id |
| * @rd_noallocate: system cache read no allocate attribute |
| * @rd_op_type: system cache read operation type |
| */ |
| struct sde_hw_pipe_sc_cfg { |
| u32 op_mode; |
| bool rd_en; |
| u32 rd_scid; |
| bool rd_noallocate; |
| u32 rd_op_type; |
| }; |
| |
| /** |
| * struct sde_hw_pipe_ts_cfg - traffic shaper configuration |
| * @size: size to prefill in bytes, or zero to disable |
| * @time: time to prefill in usec, or zero to disable |
| */ |
| struct sde_hw_pipe_ts_cfg { |
| u64 size; |
| u64 time; |
| }; |
| |
| /** |
| * Maximum number of stream buffer plane |
| */ |
| #define SDE_PIPE_SBUF_PLANE_NUM 2 |
| |
| /** |
| * struct sde_hw_pipe_sbuf_status - stream buffer status |
| * @empty: indicate if stream buffer is empty of not |
| * @rd_ptr: current read pointer of stream buffer |
| */ |
| struct sde_hw_pipe_sbuf_status { |
| bool empty[SDE_PIPE_SBUF_PLANE_NUM]; |
| u32 rd_ptr[SDE_PIPE_SBUF_PLANE_NUM]; |
| }; |
| |
| /** |
| * struct sde_hw_sspp_ops - interface to the SSPP Hw driver functions |
| * Caller must call the init function to get the pipe context for each pipe |
| * Assumption is these functions will be called after clocks are enabled |
| */ |
| struct sde_hw_sspp_ops { |
| /** |
| * setup_format - setup pixel format cropping rectangle, flip |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to pipe config structure |
| * @flags: Extra flags for format config |
| * @index: rectangle index in multirect |
| */ |
| void (*setup_format)(struct sde_hw_pipe *ctx, |
| const struct sde_format *fmt, u32 flags, |
| enum sde_sspp_multirect_index index); |
| |
| /** |
| * setup_rects - setup pipe ROI rectangles |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to pipe config structure |
| * @index: rectangle index in multirect |
| */ |
| void (*setup_rects)(struct sde_hw_pipe *ctx, |
| struct sde_hw_pipe_cfg *cfg, |
| enum sde_sspp_multirect_index index); |
| |
| /** |
| * setup_pe - setup pipe pixel extension |
| * @ctx: Pointer to pipe context |
| * @pe_ext: Pointer to pixel ext settings |
| */ |
| void (*setup_pe)(struct sde_hw_pipe *ctx, |
| struct sde_hw_pixel_ext *pe_ext); |
| |
| /** |
| * setup_excl_rect - setup pipe exclusion rectangle |
| * @ctx: Pointer to pipe context |
| * @excl_rect: Pointer to exclclusion rect structure |
| * @index: rectangle index in multirect |
| */ |
| void (*setup_excl_rect)(struct sde_hw_pipe *ctx, |
| struct sde_rect *excl_rect, |
| enum sde_sspp_multirect_index index); |
| |
| /** |
| * setup_sourceaddress - setup pipe source addresses |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to pipe config structure |
| * @index: rectangle index in multirect |
| */ |
| void (*setup_sourceaddress)(struct sde_hw_pipe *ctx, |
| struct sde_hw_pipe_cfg *cfg, |
| enum sde_sspp_multirect_index index); |
| |
| /** |
| * setup_csc - setup color space coversion |
| * @ctx: Pointer to pipe context |
| * @data: Pointer to config structure |
| */ |
| void (*setup_csc)(struct sde_hw_pipe *ctx, struct sde_csc_cfg *data); |
| |
| /** |
| * setup_solidfill - enable/disable colorfill |
| * @ctx: Pointer to pipe context |
| * @const_color: Fill color value |
| * @flags: Pipe flags |
| * @index: rectangle index in multirect |
| */ |
| void (*setup_solidfill)(struct sde_hw_pipe *ctx, u32 color, |
| enum sde_sspp_multirect_index index); |
| |
| /** |
| * setup_multirect - setup multirect configuration |
| * @ctx: Pointer to pipe context |
| * @index: rectangle index in multirect |
| * @mode: parallel fetch / time multiplex multirect mode |
| */ |
| |
| void (*setup_multirect)(struct sde_hw_pipe *ctx, |
| enum sde_sspp_multirect_index index, |
| enum sde_sspp_multirect_mode mode); |
| |
| /** |
| * setup_sharpening - setup sharpening |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to config structure |
| */ |
| void (*setup_sharpening)(struct sde_hw_pipe *ctx, |
| struct sde_hw_sharp_cfg *cfg); |
| |
| |
| /** |
| * setup_pa_hue(): Setup source hue adjustment |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to hue data |
| */ |
| void (*setup_pa_hue)(struct sde_hw_pipe *ctx, void *cfg); |
| |
| /** |
| * setup_pa_sat(): Setup source saturation adjustment |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to saturation data |
| */ |
| void (*setup_pa_sat)(struct sde_hw_pipe *ctx, void *cfg); |
| |
| /** |
| * setup_pa_val(): Setup source value adjustment |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to value data |
| */ |
| void (*setup_pa_val)(struct sde_hw_pipe *ctx, void *cfg); |
| |
| /** |
| * setup_pa_cont(): Setup source contrast adjustment |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer contrast data |
| */ |
| void (*setup_pa_cont)(struct sde_hw_pipe *ctx, void *cfg); |
| |
| /** |
| * setup_pa_memcolor - setup source color processing |
| * @ctx: Pointer to pipe context |
| * @type: Memcolor type (Skin, sky or foliage) |
| * @cfg: Pointer to memory color config data |
| */ |
| void (*setup_pa_memcolor)(struct sde_hw_pipe *ctx, |
| enum sde_memcolor_type type, void *cfg); |
| |
| /** |
| * setup_igc - setup inverse gamma correction |
| * @ctx: Pointer to pipe context |
| */ |
| void (*setup_igc)(struct sde_hw_pipe *ctx); |
| |
| /** |
| * setup_danger_safe_lut - setup danger safe LUTs |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to pipe QoS configuration |
| * |
| */ |
| void (*setup_danger_safe_lut)(struct sde_hw_pipe *ctx, |
| struct sde_hw_pipe_qos_cfg *cfg); |
| |
| /** |
| * setup_creq_lut - setup CREQ LUT |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to pipe QoS configuration |
| * |
| */ |
| void (*setup_creq_lut)(struct sde_hw_pipe *ctx, |
| struct sde_hw_pipe_qos_cfg *cfg); |
| |
| /** |
| * setup_qos_ctrl - setup QoS control |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to pipe QoS configuration |
| * |
| */ |
| void (*setup_qos_ctrl)(struct sde_hw_pipe *ctx, |
| struct sde_hw_pipe_qos_cfg *cfg); |
| |
| /** |
| * setup_histogram - setup histograms |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to histogram configuration |
| */ |
| void (*setup_histogram)(struct sde_hw_pipe *ctx, |
| void *cfg); |
| |
| /** |
| * setup_scaler - setup scaler |
| * @ctx: Pointer to pipe context |
| * @pipe_cfg: Pointer to pipe configuration |
| * @pe_cfg: Pointer to pixel extension configuration |
| * @scaler_cfg: Pointer to scaler configuration |
| */ |
| void (*setup_scaler)(struct sde_hw_pipe *ctx, |
| struct sde_hw_pipe_cfg *pipe_cfg, |
| struct sde_hw_pixel_ext *pe_cfg, |
| void *scaler_cfg); |
| |
| /** |
| * get_scaler_ver - get scaler h/w version |
| * @ctx: Pointer to pipe context |
| */ |
| u32 (*get_scaler_ver)(struct sde_hw_pipe *ctx); |
| |
| /** |
| * setup_sys_cache - setup system cache configuration |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to system cache configuration |
| */ |
| void (*setup_sys_cache)(struct sde_hw_pipe *ctx, |
| struct sde_hw_pipe_sc_cfg *cfg); |
| |
| /** |
| * get_sbuf_status - get stream buffer status |
| * @ctx: Pointer to pipe context |
| * @status: Pointer to stream buffer status |
| */ |
| void (*get_sbuf_status)(struct sde_hw_pipe *ctx, |
| struct sde_hw_pipe_sbuf_status *status); |
| |
| /** |
| * setup_ts_prefill - setup prefill traffic shaper |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to traffic shaper configuration |
| * @index: rectangle index in multirect |
| */ |
| void (*setup_ts_prefill)(struct sde_hw_pipe *ctx, |
| struct sde_hw_pipe_ts_cfg *cfg, |
| enum sde_sspp_multirect_index index); |
| |
| /** |
| * setup_cdp - setup client driven prefetch |
| * @ctx: Pointer to pipe context |
| * @cfg: Pointer to cdp configuration |
| */ |
| void (*setup_cdp)(struct sde_hw_pipe *ctx, |
| struct sde_hw_pipe_cdp_cfg *cfg); |
| |
| /** |
| * setup_secure_address - setup secureity status of the source address |
| * @ctx: Pointer to pipe context |
| * @index: rectangle index in multirect |
| * @enable: enable content protected buffer state |
| */ |
| void (*setup_secure_address)(struct sde_hw_pipe *ctx, |
| enum sde_sspp_multirect_index index, |
| bool enable); |
| }; |
| |
| /** |
| * struct sde_hw_pipe - pipe description |
| * @base: hardware block base structure |
| * @hw: block hardware details |
| * @catalog: back pointer to catalog |
| * @mdp: pointer to associated mdp portion of the catalog |
| * @idx: pipe index |
| * @cap: pointer to layer_cfg |
| * @ops: pointer to operations possible for this pipe |
| */ |
| struct sde_hw_pipe { |
| struct sde_hw_blk base; |
| struct sde_hw_blk_reg_map hw; |
| struct sde_mdss_cfg *catalog; |
| struct sde_mdp_cfg *mdp; |
| |
| /* Pipe */ |
| enum sde_sspp idx; |
| const struct sde_sspp_cfg *cap; |
| |
| /* Ops */ |
| struct sde_hw_sspp_ops ops; |
| }; |
| |
| /** |
| * sde_hw_pipe - convert base object sde_hw_base to container |
| * @hw: Pointer to base hardware block |
| * return: Pointer to hardware block container |
| */ |
| static inline struct sde_hw_pipe *to_sde_hw_pipe(struct sde_hw_blk *hw) |
| { |
| return container_of(hw, struct sde_hw_pipe, base); |
| } |
| |
| /** |
| * sde_hw_sspp_init - initializes the sspp hw driver object. |
| * Should be called once before accessing every pipe. |
| * @idx: Pipe index for which driver object is required |
| * @addr: Mapped register io address of MDP |
| * @catalog : Pointer to mdss catalog data |
| * @is_virtual_pipe: is this pipe virtual pipe |
| */ |
| struct sde_hw_pipe *sde_hw_sspp_init(enum sde_sspp idx, |
| void __iomem *addr, struct sde_mdss_cfg *catalog, |
| bool is_virtual_pipe); |
| |
| /** |
| * sde_hw_sspp_destroy(): Destroys SSPP driver context |
| * should be called during Hw pipe cleanup. |
| * @ctx: Pointer to SSPP driver context returned by sde_hw_sspp_init |
| */ |
| void sde_hw_sspp_destroy(struct sde_hw_pipe *ctx); |
| |
| #endif /*_SDE_HW_SSPP_H */ |
| |