Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 05fac682c2ca0c572d1bd8e6a38025838ddf0e68 / . / drivers / net / wireless / wl12xx / wl1251_main.c
blob: 11e1903aee6b43c6c15163cf07c647dcdea2f406 [file] [log] [blame]
/*
* This file is part of wl1251
*
* Copyright (C) 2008-2009 Nokia Corporation
*
* Contact: Kalle Valo <kalle.valo@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/firmware.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/spi/spi.h>
#include <linux/crc32.h>
#include <linux/etherdevice.h>
#include <linux/spi/wl12xx.h>
#include "wl1251.h"
#include "wl12xx_80211.h"
#include "reg.h"
#include "wl1251_ops.h"
#include "wl1251_spi.h"
#include "wl1251_event.h"
#include "wl1251_tx.h"
#include "wl1251_rx.h"
#include "wl1251_ps.h"
#include "wl1251_init.h"
#include "wl1251_debugfs.h"
static void wl1251_disable_interrupts(struct wl1251 *wl)
{
disable_irq(wl->irq);
}
static void wl1251_power_off(struct wl1251 *wl)
{
wl->set_power(false);
}
static void wl1251_power_on(struct wl1251 *wl)
{
wl->set_power(true);
}
static irqreturn_t wl1251_irq(int irq, void *cookie)
{
struct wl1251 *wl;
wl1251_debug(DEBUG_IRQ, "IRQ");
wl = cookie;
schedule_work(&wl->irq_work);
return IRQ_HANDLED;
}
static int wl1251_fetch_firmware(struct wl1251 *wl)
{
const struct firmware *fw;
int ret;
ret = request_firmware(&fw, wl->chip.fw_filename, &wl->spi->dev);
if (ret < 0) {
wl1251_error("could not get firmware: %d", ret);
return ret;
}
if (fw->size % 4) {
wl1251_error("firmware size is not multiple of 32 bits: %zu",
fw->size);
ret = -EILSEQ;
goto out;
}
wl->fw_len = fw->size;
wl->fw = kmalloc(wl->fw_len, GFP_KERNEL);
if (!wl->fw) {
wl1251_error("could not allocate memory for the firmware");
ret = -ENOMEM;
goto out;
}
memcpy(wl->fw, fw->data, wl->fw_len);
ret = 0;
out:
release_firmware(fw);
return ret;
}
static int wl1251_fetch_nvs(struct wl1251 *wl)
{
const struct firmware *fw;
int ret;
ret = request_firmware(&fw, wl->chip.nvs_filename, &wl->spi->dev);
if (ret < 0) {
wl1251_error("could not get nvs file: %d", ret);
return ret;
}
if (fw->size % 4) {
wl1251_error("nvs size is not multiple of 32 bits: %zu",
fw->size);
ret = -EILSEQ;
goto out;
}
wl->nvs_len = fw->size;
wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);
if (!wl->nvs) {
wl1251_error("could not allocate memory for the nvs file");
ret = -ENOMEM;
goto out;
}
memcpy(wl->nvs, fw->data, wl->nvs_len);
ret = 0;
out:
release_firmware(fw);
return ret;
}
static void wl1251_fw_wakeup(struct wl1251 *wl)
{
u32 elp_reg;
elp_reg = ELPCTRL_WAKE_UP;
wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
elp_reg = wl1251_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
if (!(elp_reg & ELPCTRL_WLAN_READY))
wl1251_warning("WLAN not ready");
}
static int wl1251_chip_wakeup(struct wl1251 *wl)
{
int ret = 0;
wl1251_power_on(wl);
msleep(wl->chip.power_on_sleep);
wl1251_spi_reset(wl);
wl1251_spi_init(wl);
/* We don't need a real memory partition here, because we only want
* to use the registers at this point. */
wl1251_set_partition(wl,
0x00000000,
0x00000000,
REGISTERS_BASE,
REGISTERS_DOWN_SIZE);
/* ELP module wake up */
wl1251_fw_wakeup(wl);
/* whal_FwCtrl_BootSm() */
/* 0. read chip id from CHIP_ID */
wl->chip.id = wl1251_reg_read32(wl, CHIP_ID_B);
/* 1. check if chip id is valid */
switch (wl->chip.id) {
case CHIP_ID_1251_PG12:
wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
wl->chip.id);
wl1251_setup(wl);
break;
case CHIP_ID_1251_PG10:
case CHIP_ID_1251_PG11:
default:
wl1251_error("unsupported chip id: 0x%x", wl->chip.id);
ret = -ENODEV;
goto out;
}
if (wl->fw == NULL) {
ret = wl1251_fetch_firmware(wl);
if (ret < 0)
goto out;
}
/* No NVS from netlink, try to get it from the filesystem */
if (wl->nvs == NULL) {
ret = wl1251_fetch_nvs(wl);
if (ret < 0)
goto out;
}
out:
return ret;
}
static void wl1251_filter_work(struct work_struct *work)
{
struct wl1251 *wl =
container_of(work, struct wl1251, filter_work);
int ret;
mutex_lock(&wl->mutex);
if (wl->state == WL1251_STATE_OFF)
goto out;
ret = wl1251_ps_elp_wakeup(wl);
if (ret < 0)
goto out;
/* FIXME: replace the magic numbers with proper definitions */
ret = wl->chip.op_cmd_join(wl, wl->bss_type, 1, 100, 0);
if (ret < 0)
goto out_sleep;
out_sleep:
wl1251_ps_elp_sleep(wl);
out:
mutex_unlock(&wl->mutex);
}
int wl1251_plt_start(struct wl1251 *wl)
{
int ret;
mutex_lock(&wl->mutex);
wl1251_notice("power up");
if (wl->state != WL1251_STATE_OFF) {
wl1251_error("cannot go into PLT state because not "
"in off state: %d", wl->state);
return -EBUSY;
}
wl->state = WL1251_STATE_PLT;
ret = wl1251_chip_wakeup(wl);
if (ret < 0)
return ret;
ret = wl->chip.op_boot(wl);
if (ret < 0)
return ret;
wl1251_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
ret = wl->chip.op_plt_init(wl);
if (ret < 0)
return ret;
return 0;
}
int wl1251_plt_stop(struct wl1251 *wl)
{
mutex_lock(&wl->mutex);
wl1251_notice("power down");
if (wl->state != WL1251_STATE_PLT) {
wl1251_error("cannot power down because not in PLT "
"state: %d", wl->state);
return -EBUSY;
}
wl1251_disable_interrupts(wl);
wl1251_power_off(wl);
wl->state = WL1251_STATE_OFF;
return 0;
}
static int wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct wl1251 *wl = hw->priv;
skb_queue_tail(&wl->tx_queue, skb);
/*
* The chip specific setup must run before the first TX packet -
* before that, the tx_work will not be initialized!
*/
schedule_work(&wl->tx_work);
/*
* The workqueue is slow to process the tx_queue and we need stop
* the queue here, otherwise the queue will get too long.
*/
if (skb_queue_len(&wl->tx_queue) >= WL1251_TX_QUEUE_MAX_LENGTH) {
ieee80211_stop_queues(wl->hw);
/*
* FIXME: this is racy, the variable is not properly
* protected. Maybe fix this by removing the stupid
* variable altogether and checking the real queue state?
*/
wl->tx_queue_stopped = true;
}
return NETDEV_TX_OK;
}
static int wl1251_op_start(struct ieee80211_hw *hw)
{
struct wl1251 *wl = hw->priv;
int ret = 0;
wl1251_debug(DEBUG_MAC80211, "mac80211 start");
mutex_lock(&wl->mutex);
if (wl->state != WL1251_STATE_OFF) {
wl1251_error("cannot start because not in off state: %d",
wl->state);
ret = -EBUSY;
goto out;
}
ret = wl1251_chip_wakeup(wl);
if (ret < 0)
return ret;
ret = wl->chip.op_boot(wl);
if (ret < 0)
goto out;
ret = wl->chip.op_hw_init(wl);
if (ret < 0)
goto out;
ret = wl1251_acx_station_id(wl);
if (ret < 0)
goto out;
wl->state = WL1251_STATE_ON;
wl1251_info("firmware booted (%s)", wl->chip.fw_ver);
out:
if (ret < 0)
wl1251_power_off(wl);
mutex_unlock(&wl->mutex);
return ret;
}
static void wl1251_op_stop(struct ieee80211_hw *hw)
{
struct wl1251 *wl = hw->priv;
wl1251_info("down");
wl1251_debug(DEBUG_MAC80211, "mac80211 stop");
mutex_lock(&wl->mutex);
WARN_ON(wl->state != WL1251_STATE_ON);
if (wl->scanning) {
mutex_unlock(&wl->mutex);
ieee80211_scan_completed(wl->hw, true);
mutex_lock(&wl->mutex);
wl->scanning = false;
}
wl->state = WL1251_STATE_OFF;
wl1251_disable_interrupts(wl);
mutex_unlock(&wl->mutex);
cancel_work_sync(&wl->irq_work);
cancel_work_sync(&wl->tx_work);
cancel_work_sync(&wl->filter_work);
mutex_lock(&wl->mutex);
/* let's notify MAC80211 about the remaining pending TX frames */
wl->chip.op_tx_flush(wl);
wl1251_power_off(wl);
memset(wl->bssid, 0, ETH_ALEN);
wl->listen_int = 1;
wl->bss_type = MAX_BSS_TYPE;
wl->data_in_count = 0;
wl->rx_counter = 0;
wl->rx_handled = 0;
wl->rx_current_buffer = 0;
wl->rx_last_id = 0;
wl->next_tx_complete = 0;
wl->elp = false;
wl->psm = 0;
wl->tx_queue_stopped = false;
wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
wl1251_debugfs_reset(wl);
mutex_unlock(&wl->mutex);
}
static int wl1251_op_add_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf)
{
struct wl1251 *wl = hw->priv;
DECLARE_MAC_BUF(mac);
int ret = 0;
wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %s",
conf->type, print_mac(mac, conf->mac_addr));
mutex_lock(&wl->mutex);
switch (conf->type) {
case NL80211_IFTYPE_STATION:
wl->bss_type = BSS_TYPE_STA_BSS;
break;
case NL80211_IFTYPE_ADHOC:
wl->bss_type = BSS_TYPE_IBSS;
break;
default:
ret = -EOPNOTSUPP;
goto out;
}
if (memcmp(wl->mac_addr, conf->mac_addr, ETH_ALEN)) {
memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
ret = wl1251_acx_station_id(wl);
if (ret < 0)
goto out;
}
out:
mutex_unlock(&wl->mutex);
return ret;
}
static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf)
{
wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface");
}
static int wl1251_build_null_data(struct wl1251 *wl)
{
struct wl12xx_null_data_template template;
if (!is_zero_ether_addr(wl->bssid)) {
memcpy(template.header.da, wl->bssid, ETH_ALEN);
memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
} else {
memset(template.header.da, 0xff, ETH_ALEN);
memset(template.header.bssid, 0xff, ETH_ALEN);
}
memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
IEEE80211_STYPE_NULLFUNC);
return wl1251_cmd_template_set(wl, CMD_NULL_DATA, &template,
sizeof(template));
}
static int wl1251_build_ps_poll(struct wl1251 *wl, u16 aid)
{
struct wl12xx_ps_poll_template template;
memcpy(template.bssid, wl->bssid, ETH_ALEN);
memcpy(template.ta, wl->mac_addr, ETH_ALEN);
template.aid = aid;
template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
return wl1251_cmd_template_set(wl, CMD_PS_POLL, &template,
sizeof(template));
}
static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct wl1251 *wl = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
int channel, ret = 0;
channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
wl1251_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
channel,
conf->flags & IEEE80211_CONF_PS ? "on" : "off",
conf->power_level);
mutex_lock(&wl->mutex);
ret = wl1251_ps_elp_wakeup(wl);
if (ret < 0)
goto out;
if (channel != wl->channel) {
/* FIXME: use beacon interval provided by mac80211 */
ret = wl->chip.op_cmd_join(wl, wl->bss_type, 1, 100, 0);
if (ret < 0)
goto out_sleep;
wl->channel = channel;
}
ret = wl1251_build_null_data(wl);
if (ret < 0)
goto out_sleep;
if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
wl1251_info("psm enabled");
wl->psm_requested = true;
/*
* We enter PSM only if we're already associated.
* If we're not, we'll enter it when joining an SSID,
* through the bss_info_changed() hook.
*/
ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
} else if (!(conf->flags & IEEE80211_CONF_PS) &&
wl->psm_requested) {
wl1251_info("psm disabled");
wl->psm_requested = false;
if (wl->psm)
ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
}
if (conf->power_level != wl->power_level) {
ret = wl1251_acx_tx_power(wl, conf->power_level);
if (ret < 0)
goto out;
wl->power_level = conf->power_level;
}
out_sleep:
wl1251_ps_elp_sleep(wl);
out:
mutex_unlock(&wl->mutex);
return ret;
}
#define WL1251_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
FIF_ALLMULTI | \
FIF_FCSFAIL | \
FIF_BCN_PRBRESP_PROMISC | \
FIF_CONTROL | \
FIF_OTHER_BSS)
static void wl1251_op_configure_filter(struct ieee80211_hw *hw,
unsigned int changed,
unsigned int *total,
int mc_count,
struct dev_addr_list *mc_list)
{
struct wl1251 *wl = hw->priv;
wl1251_debug(DEBUG_MAC80211, "mac80211 configure filter");
*total &= WL1251_SUPPORTED_FILTERS;
changed &= WL1251_SUPPORTED_FILTERS;
if (changed == 0)
/* no filters which we support changed */
return;
/* FIXME: wl->rx_config and wl->rx_filter are not protected */
wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
if (*total & FIF_PROMISC_IN_BSS) {
wl->rx_config |= CFG_BSSID_FILTER_EN;
wl->rx_config |= CFG_RX_ALL_GOOD;
}
if (*total & FIF_ALLMULTI)
/*
* CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
* all multicast frames
*/
wl->rx_config &= ~CFG_MC_FILTER_EN;
if (*total & FIF_FCSFAIL)
wl->rx_filter |= CFG_RX_FCS_ERROR;
if (*total & FIF_BCN_PRBRESP_PROMISC) {
wl->rx_config &= ~CFG_BSSID_FILTER_EN;
wl->rx_config &= ~CFG_SSID_FILTER_EN;
}
if (*total & FIF_CONTROL)
wl->rx_filter |= CFG_RX_CTL_EN;
if (*total & FIF_OTHER_BSS)
wl->rx_filter &= ~CFG_BSSID_FILTER_EN;
/*
* FIXME: workqueues need to be properly cancelled on stop(), for
* now let's just disable changing the filter settings. They will
* be updated any on config().
*/
/* schedule_work(&wl->filter_work); */
}
/* HW encryption */
static int wl1251_set_key_type(struct wl1251 *wl,
struct wl1251_cmd_set_keys *key,
enum set_key_cmd cmd,
struct ieee80211_key_conf *mac80211_key,
const u8 *addr)
{
switch (mac80211_key->alg) {
case ALG_WEP:
if (is_broadcast_ether_addr(addr))
key->key_type = KEY_WEP_DEFAULT;
else
key->key_type = KEY_WEP_ADDR;
mac80211_key->hw_key_idx = mac80211_key->keyidx;
break;
case ALG_TKIP:
if (is_broadcast_ether_addr(addr))
key->key_type = KEY_TKIP_MIC_GROUP;
else
key->key_type = KEY_TKIP_MIC_PAIRWISE;
mac80211_key->hw_key_idx = mac80211_key->keyidx;
break;
case ALG_CCMP:
if (is_broadcast_ether_addr(addr))
key->key_type = KEY_AES_GROUP;
else
key->key_type = KEY_AES_PAIRWISE;
mac80211_key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
break;
default:
wl1251_error("Unknown key algo 0x%x", mac80211_key->alg);
return -EOPNOTSUPP;
}
return 0;
}
static int wl1251_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
struct wl1251 *wl = hw->priv;
struct wl1251_cmd_set_keys *wl_cmd;
const u8 *addr;
int ret;
static const u8 bcast_addr[ETH_ALEN] =
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
wl1251_debug(DEBUG_MAC80211, "mac80211 set key");
wl_cmd = kzalloc(sizeof(*wl_cmd), GFP_KERNEL);
if (!wl_cmd) {
ret = -ENOMEM;
goto out;
}
addr = sta ? sta->addr : bcast_addr;
wl1251_debug(DEBUG_CRYPT, "CMD: 0x%x", cmd);
wl1251_dump(DEBUG_CRYPT, "ADDR: ", addr, ETH_ALEN);
wl1251_debug(DEBUG_CRYPT, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
key->alg, key->keyidx, key->keylen, key->flags);
wl1251_dump(DEBUG_CRYPT, "KEY: ", key->key, key->keylen);
if (is_zero_ether_addr(addr)) {
/* We dont support TX only encryption */
ret = -EOPNOTSUPP;
goto out;
}
mutex_lock(&wl->mutex);
ret = wl1251_ps_elp_wakeup(wl);
if (ret < 0)
goto out_unlock;
switch (cmd) {
case SET_KEY:
wl_cmd->key_action = KEY_ADD_OR_REPLACE;
break;
case DISABLE_KEY:
wl_cmd->key_action = KEY_REMOVE;
break;
default:
wl1251_error("Unsupported key cmd 0x%x", cmd);
break;
}
ret = wl1251_set_key_type(wl, wl_cmd, cmd, key, addr);
if (ret < 0) {
wl1251_error("Set KEY type failed");
goto out_sleep;
}
if (wl_cmd->key_type != KEY_WEP_DEFAULT)
memcpy(wl_cmd->addr, addr, ETH_ALEN);
if ((wl_cmd->key_type == KEY_TKIP_MIC_GROUP) ||
(wl_cmd->key_type == KEY_TKIP_MIC_PAIRWISE)) {
/*
* We get the key in the following form:
* TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
* but the target is expecting:
* TKIP - RX MIC - TX MIC
*/
memcpy(wl_cmd->key, key->key, 16);
memcpy(wl_cmd->key + 16, key->key + 24, 8);
memcpy(wl_cmd->key + 24, key->key + 16, 8);
} else {
memcpy(wl_cmd->key, key->key, key->keylen);
}
wl_cmd->key_size = key->keylen;
wl_cmd->id = key->keyidx;
wl_cmd->ssid_profile = 0;
wl1251_dump(DEBUG_CRYPT, "TARGET KEY: ", wl_cmd, sizeof(*wl_cmd));
ret = wl1251_cmd_send(wl, CMD_SET_KEYS, wl_cmd, sizeof(*wl_cmd));
if (ret < 0) {
wl1251_warning("could not set keys");
goto out_sleep;
}
out_sleep:
wl1251_ps_elp_sleep(wl);
out_unlock:
mutex_unlock(&wl->mutex);
out:
kfree(wl_cmd);
return ret;
}
static int wl1251_build_basic_rates(char *rates)
{
u8 index = 0;
rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
return index;
}
static int wl1251_build_extended_rates(char *rates)
{
u8 index = 0;
rates[index++] = IEEE80211_OFDM_RATE_6MB;
rates[index++] = IEEE80211_OFDM_RATE_9MB;
rates[index++] = IEEE80211_OFDM_RATE_12MB;
rates[index++] = IEEE80211_OFDM_RATE_18MB;
rates[index++] = IEEE80211_OFDM_RATE_24MB;
rates[index++] = IEEE80211_OFDM_RATE_36MB;
rates[index++] = IEEE80211_OFDM_RATE_48MB;
rates[index++] = IEEE80211_OFDM_RATE_54MB;
return index;
}
static int wl1251_build_probe_req(struct wl1251 *wl, u8 *ssid, size_t ssid_len)
{
struct wl12xx_probe_req_template template;
struct wl12xx_ie_rates *rates;
char *ptr;
u16 size;
ptr = (char *)&template;
size = sizeof(struct ieee80211_header);
memset(template.header.da, 0xff, ETH_ALEN);
memset(template.header.bssid, 0xff, ETH_ALEN);
memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
/* IEs */
/* SSID */
template.ssid.header.id = WLAN_EID_SSID;
template.ssid.header.len = ssid_len;
if (ssid_len && ssid)
memcpy(template.ssid.ssid, ssid, ssid_len);
size += sizeof(struct wl12xx_ie_header) + ssid_len;
ptr += size;
/* Basic Rates */
rates = (struct wl12xx_ie_rates *)ptr;
rates->header.id = WLAN_EID_SUPP_RATES;
rates->header.len = wl1251_build_basic_rates(rates->rates);
size += sizeof(struct wl12xx_ie_header) + rates->header.len;
ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
/* Extended rates */
rates = (struct wl12xx_ie_rates *)ptr;
rates->header.id = WLAN_EID_EXT_SUPP_RATES;
rates->header.len = wl1251_build_extended_rates(rates->rates);
size += sizeof(struct wl12xx_ie_header) + rates->header.len;
wl1251_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
return wl1251_cmd_template_set(wl, CMD_PROBE_REQ, &template,
size);
}
static int wl1251_hw_scan(struct wl1251 *wl, u8 *ssid, size_t len,
u8 active_scan, u8 high_prio, u8 num_channels,
u8 probe_requests)
{
struct wl1251_cmd_trigger_scan_to *trigger = NULL;
struct cmd_scan *params = NULL;
int i, ret;
u16 scan_options = 0;
if (wl->scanning)
return -EINVAL;
params = kzalloc(sizeof(*params), GFP_KERNEL);
if (!params)
return -ENOMEM;
params->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD);
params->params.rx_filter_options =
cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN);
/* High priority scan */
if (!active_scan)
scan_options |= SCAN_PASSIVE;
if (high_prio)
scan_options |= SCAN_PRIORITY_HIGH;
params->params.scan_options = scan_options;
params->params.num_channels = num_channels;
params->params.num_probe_requests = probe_requests;
params->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */
params->params.tid_trigger = 0;
for (i = 0; i < num_channels; i++) {
params->channels[i].min_duration = cpu_to_le32(30000);
params->channels[i].max_duration = cpu_to_le32(60000);
memset(&params->channels[i].bssid_lsb, 0xff, 4);
memset(&params->channels[i].bssid_msb, 0xff, 2);
params->channels[i].early_termination = 0;
params->channels[i].tx_power_att = 0;
params->channels[i].channel = i + 1;
memset(params->channels[i].pad, 0, 3);
}
for (i = num_channels; i < SCAN_MAX_NUM_OF_CHANNELS; i++)
memset(&params->channels[i], 0,
sizeof(struct basic_scan_channel_parameters));
if (len && ssid) {
params->params.ssid_len = len;
memcpy(params->params.ssid, ssid, len);
} else {
params->params.ssid_len = 0;
memset(params->params.ssid, 0, 32);
}
ret = wl1251_build_probe_req(wl, ssid, len);
if (ret < 0) {
wl1251_error("PROBE request template failed");
goto out;
}
trigger = kzalloc(sizeof(*trigger), GFP_KERNEL);
if (!trigger)
goto out;
trigger->timeout = 0;
ret = wl1251_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger,
sizeof(*trigger));
if (ret < 0) {
wl1251_error("trigger scan to failed for hw scan");
goto out;
}
wl1251_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
wl->scanning = true;
ret = wl1251_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
if (ret < 0)
wl1251_error("SCAN failed");
wl1251_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
if (params->header.status != CMD_STATUS_SUCCESS) {
wl1251_error("TEST command answer error: %d",
params->header.status);
wl->scanning = false;
ret = -EIO;
goto out;
}
out:
kfree(params);
return ret;
}
static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
struct cfg80211_scan_request *req)
{
struct wl1251 *wl = hw->priv;
int ret;
u8 *ssid = NULL;
size_t ssid_len = 0;
wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan");
if (req->n_ssids) {
ssid = req->ssids[0].ssid;
ssid_len = req->ssids[0].ssid_len;
}
mutex_lock(&wl->mutex);
ret = wl1251_ps_elp_wakeup(wl);
if (ret < 0)
goto out;
ret = wl1251_hw_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3);
wl1251_ps_elp_sleep(wl);
out:
mutex_unlock(&wl->mutex);
return ret;
}
static int wl1251_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
{
struct wl1251 *wl = hw->priv;
int ret;
mutex_lock(&wl->mutex);
ret = wl1251_ps_elp_wakeup(wl);
if (ret < 0)
goto out;
ret = wl1251_acx_rts_threshold(wl, (u16) value);
if (ret < 0)
wl1251_warning("wl1251_op_set_rts_threshold failed: %d", ret);
wl1251_ps_elp_sleep(wl);
out:
mutex_unlock(&wl->mutex);
return ret;
}
static void wl1251_op_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
u32 changed)
{
enum wl1251_cmd_ps_mode mode;
struct wl1251 *wl = hw->priv;
struct sk_buff *beacon;
int ret;
wl1251_debug(DEBUG_MAC80211, "mac80211 bss info changed");
mutex_lock(&wl->mutex);
ret = wl1251_ps_elp_wakeup(wl);
if (ret < 0)
goto out;
if (changed & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) {
wl->aid = bss_conf->aid;
ret = wl1251_build_ps_poll(wl, wl->aid);
if (ret < 0)
goto out_sleep;
ret = wl1251_acx_aid(wl, wl->aid);
if (ret < 0)
goto out_sleep;
/* If we want to go in PSM but we're not there yet */
if (wl->psm_requested && !wl->psm) {
mode = STATION_POWER_SAVE_MODE;
ret = wl1251_ps_set_mode(wl, mode);
if (ret < 0)
goto out_sleep;
}
}
}
if (changed & BSS_CHANGED_ERP_SLOT) {
if (bss_conf->use_short_slot)
ret = wl1251_acx_slot(wl, SLOT_TIME_SHORT);
else
ret = wl1251_acx_slot(wl, SLOT_TIME_LONG);
if (ret < 0) {
wl1251_warning("Set slot time failed %d", ret);
goto out_sleep;
}
}
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
if (bss_conf->use_short_preamble)
wl1251_acx_set_preamble(wl, ACX_PREAMBLE_SHORT);
else
wl1251_acx_set_preamble(wl, ACX_PREAMBLE_LONG);
}
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
if (bss_conf->use_cts_prot)
ret = wl1251_acx_cts_protect(wl, CTSPROTECT_ENABLE);
else
ret = wl1251_acx_cts_protect(wl, CTSPROTECT_DISABLE);
if (ret < 0) {
wl1251_warning("Set ctsprotect failed %d", ret);
goto out;
}
}
if (changed & BSS_CHANGED_BSSID) {
memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
ret = wl1251_build_null_data(wl);
if (ret < 0)
goto out;
if (wl->bss_type != BSS_TYPE_IBSS) {
ret = wl1251_cmd_join(wl, wl->bss_type, 5, 100, 1);
if (ret < 0)
goto out_sleep;
wl1251_warning("Set ctsprotect failed %d", ret);
goto out_sleep;
}
}
if (changed & BSS_CHANGED_BEACON) {
beacon = ieee80211_beacon_get(hw, vif);
ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data,
beacon->len);
if (ret < 0) {
dev_kfree_skb(beacon);
goto out;
}
ret = wl1251_cmd_template_set(wl, CMD_PROBE_RESP, beacon->data,
beacon->len);
dev_kfree_skb(beacon);
if (ret < 0)
goto out;
ret = wl->chip.op_cmd_join(wl, wl->bss_type, 1, 100, 0);
if (ret < 0)
goto out;
}
out_sleep:
wl1251_ps_elp_sleep(wl);
out:
mutex_unlock(&wl->mutex);
}
/* can't be const, mac80211 writes to this */
static struct ieee80211_rate wl1251_rates[] = {
{ .bitrate = 10,
.hw_value = 0x1,
.hw_value_short = 0x1, },
{ .bitrate = 20,
.hw_value = 0x2,
.hw_value_short = 0x2,
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
{ .bitrate = 55,
.hw_value = 0x4,
.hw_value_short = 0x4,
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
{ .bitrate = 110,
.hw_value = 0x20,
.hw_value_short = 0x20,
.flags = IEEE80211_RATE_SHORT_PREAMBLE },
{ .bitrate = 60,
.hw_value = 0x8,
.hw_value_short = 0x8, },
{ .bitrate = 90,
.hw_value = 0x10,
.hw_value_short = 0x10, },
{ .bitrate = 120,
.hw_value = 0x40,
.hw_value_short = 0x40, },
{ .bitrate = 180,
.hw_value = 0x80,
.hw_value_short = 0x80, },
{ .bitrate = 240,
.hw_value = 0x200,
.hw_value_short = 0x200, },
{ .bitrate = 360,
.hw_value = 0x400,
.hw_value_short = 0x400, },
{ .bitrate = 480,
.hw_value = 0x800,
.hw_value_short = 0x800, },
{ .bitrate = 540,
.hw_value = 0x1000,
.hw_value_short = 0x1000, },
};
/* can't be const, mac80211 writes to this */
static struct ieee80211_channel wl1251_channels[] = {
{ .hw_value = 1, .center_freq = 2412},
{ .hw_value = 2, .center_freq = 2417},
{ .hw_value = 3, .center_freq = 2422},
{ .hw_value = 4, .center_freq = 2427},
{ .hw_value = 5, .center_freq = 2432},
{ .hw_value = 6, .center_freq = 2437},
{ .hw_value = 7, .center_freq = 2442},
{ .hw_value = 8, .center_freq = 2447},
{ .hw_value = 9, .center_freq = 2452},
{ .hw_value = 10, .center_freq = 2457},
{ .hw_value = 11, .center_freq = 2462},
{ .hw_value = 12, .center_freq = 2467},
{ .hw_value = 13, .center_freq = 2472},
};
/* can't be const, mac80211 writes to this */
static struct ieee80211_supported_band wl1251_band_2ghz = {
.channels = wl1251_channels,
.n_channels = ARRAY_SIZE(wl1251_channels),
.bitrates = wl1251_rates,
.n_bitrates = ARRAY_SIZE(wl1251_rates),
};
static const struct ieee80211_ops wl1251_ops = {
.start = wl1251_op_start,
.stop = wl1251_op_stop,
.add_interface = wl1251_op_add_interface,
.remove_interface = wl1251_op_remove_interface,
.config = wl1251_op_config,
.configure_filter = wl1251_op_configure_filter,
.tx = wl1251_op_tx,
.set_key = wl1251_op_set_key,
.hw_scan = wl1251_op_hw_scan,
.bss_info_changed = wl1251_op_bss_info_changed,
.set_rts_threshold = wl1251_op_set_rts_threshold,
};
static int wl1251_register_hw(struct wl1251 *wl)
{
int ret;
if (wl->mac80211_registered)
return 0;
SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
ret = ieee80211_register_hw(wl->hw);
if (ret < 0) {
wl1251_error("unable to register mac80211 hw: %d", ret);
return ret;
}
wl->mac80211_registered = true;
wl1251_notice("loaded");
return 0;
}
static int wl1251_init_ieee80211(struct wl1251 *wl)
{
/* The tx descriptor buffer and the TKIP space */
wl->hw->extra_tx_headroom = sizeof(struct tx_double_buffer_desc)
+ WL1251_TKIP_IV_SPACE;
/* unit us */
/* FIXME: find a proper value */
wl->hw->channel_change_time = 10000;
wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
wl->hw->wiphy->max_scan_ssids = 1;
wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1251_band_2ghz;
SET_IEEE80211_DEV(wl->hw, &wl->spi->dev);
return 0;
}
#define WL1251_DEFAULT_CHANNEL 1
static int __devinit wl1251_probe(struct spi_device *spi)
{
struct wl12xx_platform_data *pdata;
struct ieee80211_hw *hw;
struct wl1251 *wl;
int ret, i;
static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
pdata = spi->dev.platform_data;
if (!pdata) {
wl1251_error("no platform data");
return -ENODEV;
}
hw = ieee80211_alloc_hw(sizeof(*wl), &wl1251_ops);
if (!hw) {
wl1251_error("could not alloc ieee80211_hw");
return -ENOMEM;
}
wl = hw->priv;
memset(wl, 0, sizeof(*wl));
wl->hw = hw;
dev_set_drvdata(&spi->dev, wl);
wl->spi = spi;
wl->data_in_count = 0;
skb_queue_head_init(&wl->tx_queue);
INIT_WORK(&wl->filter_work, wl1251_filter_work);
wl->channel = WL1251_DEFAULT_CHANNEL;
wl->scanning = false;
wl->default_key = 0;
wl->listen_int = 1;
wl->rx_counter = 0;
wl->rx_handled = 0;
wl->rx_current_buffer = 0;
wl->rx_last_id = 0;
wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
wl->elp = false;
wl->psm = 0;
wl->psm_requested = false;
wl->tx_queue_stopped = false;
wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
/* We use the default power on sleep time until we know which chip
* we're using */
wl->chip.power_on_sleep = WL1251_DEFAULT_POWER_ON_SLEEP;
for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
wl->tx_frames[i] = NULL;
wl->next_tx_complete = 0;
/*
* In case our MAC address is not correctly set,
* we use a random but Nokia MAC.
*/
memcpy(wl->mac_addr, nokia_oui, 3);
get_random_bytes(wl->mac_addr + 3, 3);
wl->state = WL1251_STATE_OFF;
mutex_init(&wl->mutex);
wl->tx_mgmt_frm_rate = DEFAULT_HW_GEN_TX_RATE;
wl->tx_mgmt_frm_mod = DEFAULT_HW_GEN_MODULATION_TYPE;
wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL);
if (!wl->rx_descriptor) {
wl1251_error("could not allocate memory for rx descriptor");
ret = -ENOMEM;
goto out_free;
}
/* This is the only SPI value that we need to set here, the rest
* comes from the board-peripherals file */
spi->bits_per_word = 32;
ret = spi_setup(spi);
if (ret < 0) {
wl1251_error("spi_setup failed");
goto out_free;
}
wl->set_power = pdata->set_power;
if (!wl->set_power) {
wl1251_error("set power function missing in platform data");
ret = -ENODEV;
goto out_free;
}
wl->irq = spi->irq;
if (wl->irq < 0) {
wl1251_error("irq missing in platform data");
ret = -ENODEV;
goto out_free;
}
ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
if (ret < 0) {
wl1251_error("request_irq() failed: %d", ret);
goto out_free;
}
set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
disable_irq(wl->irq);
ret = wl1251_init_ieee80211(wl);
if (ret)
goto out_irq;
ret = wl1251_register_hw(wl);
if (ret)
goto out_irq;
wl1251_debugfs_init(wl);
wl1251_notice("initialized");
return 0;
out_irq:
free_irq(wl->irq, wl);
out_free:
kfree(wl->rx_descriptor);
wl->rx_descriptor = NULL;
ieee80211_free_hw(hw);
return ret;
}
static int __devexit wl1251_remove(struct spi_device *spi)
{
struct wl1251 *wl = dev_get_drvdata(&spi->dev);
ieee80211_unregister_hw(wl->hw);
wl1251_debugfs_exit(wl);
free_irq(wl->irq, wl);
kfree(wl->target_mem_map);
kfree(wl->data_path);
kfree(wl->fw);
wl->fw = NULL;
kfree(wl->nvs);
wl->nvs = NULL;
kfree(wl->rx_descriptor);
wl->rx_descriptor = NULL;
ieee80211_free_hw(wl->hw);
return 0;
}
static struct spi_driver wl1251_spi_driver = {
.driver = {
/* FIXME: use wl12xx name to not break the user space */
.name = "wl12xx",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = wl1251_probe,
.remove = __devexit_p(wl1251_remove),
};
static int __init wl1251_init(void)
{
int ret;
ret = spi_register_driver(&wl1251_spi_driver);
if (ret < 0) {
wl1251_error("failed to register spi driver: %d", ret);
goto out;
}
out:
return ret;
}
static void __exit wl1251_exit(void)
{
spi_unregister_driver(&wl1251_spi_driver);
wl1251_notice("unloaded");
}
module_init(wl1251_init);
module_exit(wl1251_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kalle Valo <Kalle.Valo@nokia.com>, "
"Luciano Coelho <luciano.coelho@nokia.com>");