| /* |
| * Copyright © 2012 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Eugeni Dodonov <eugeni.dodonov@intel.com> |
| * |
| */ |
| |
| #include "i915_drv.h" |
| #include "intel_drv.h" |
| |
| struct ddi_buf_trans { |
| u32 trans1; /* balance leg enable, de-emph level */ |
| u32 trans2; /* vref sel, vswing */ |
| u8 i_boost; /* SKL: I_boost; valid: 0x0, 0x1, 0x3, 0x7 */ |
| }; |
| |
| /* HDMI/DVI modes ignore everything but the last 2 items. So we share |
| * them for both DP and FDI transports, allowing those ports to |
| * automatically adapt to HDMI connections as well |
| */ |
| static const struct ddi_buf_trans hsw_ddi_translations_dp[] = { |
| { 0x00FFFFFF, 0x0006000E, 0x0 }, |
| { 0x00D75FFF, 0x0005000A, 0x0 }, |
| { 0x00C30FFF, 0x00040006, 0x0 }, |
| { 0x80AAAFFF, 0x000B0000, 0x0 }, |
| { 0x00FFFFFF, 0x0005000A, 0x0 }, |
| { 0x00D75FFF, 0x000C0004, 0x0 }, |
| { 0x80C30FFF, 0x000B0000, 0x0 }, |
| { 0x00FFFFFF, 0x00040006, 0x0 }, |
| { 0x80D75FFF, 0x000B0000, 0x0 }, |
| }; |
| |
| static const struct ddi_buf_trans hsw_ddi_translations_fdi[] = { |
| { 0x00FFFFFF, 0x0007000E, 0x0 }, |
| { 0x00D75FFF, 0x000F000A, 0x0 }, |
| { 0x00C30FFF, 0x00060006, 0x0 }, |
| { 0x00AAAFFF, 0x001E0000, 0x0 }, |
| { 0x00FFFFFF, 0x000F000A, 0x0 }, |
| { 0x00D75FFF, 0x00160004, 0x0 }, |
| { 0x00C30FFF, 0x001E0000, 0x0 }, |
| { 0x00FFFFFF, 0x00060006, 0x0 }, |
| { 0x00D75FFF, 0x001E0000, 0x0 }, |
| }; |
| |
| static const struct ddi_buf_trans hsw_ddi_translations_hdmi[] = { |
| /* Idx NT mV d T mV d db */ |
| { 0x00FFFFFF, 0x0006000E, 0x0 },/* 0: 400 400 0 */ |
| { 0x00E79FFF, 0x000E000C, 0x0 },/* 1: 400 500 2 */ |
| { 0x00D75FFF, 0x0005000A, 0x0 },/* 2: 400 600 3.5 */ |
| { 0x00FFFFFF, 0x0005000A, 0x0 },/* 3: 600 600 0 */ |
| { 0x00E79FFF, 0x001D0007, 0x0 },/* 4: 600 750 2 */ |
| { 0x00D75FFF, 0x000C0004, 0x0 },/* 5: 600 900 3.5 */ |
| { 0x00FFFFFF, 0x00040006, 0x0 },/* 6: 800 800 0 */ |
| { 0x80E79FFF, 0x00030002, 0x0 },/* 7: 800 1000 2 */ |
| { 0x00FFFFFF, 0x00140005, 0x0 },/* 8: 850 850 0 */ |
| { 0x00FFFFFF, 0x000C0004, 0x0 },/* 9: 900 900 0 */ |
| { 0x00FFFFFF, 0x001C0003, 0x0 },/* 10: 950 950 0 */ |
| { 0x80FFFFFF, 0x00030002, 0x0 },/* 11: 1000 1000 0 */ |
| }; |
| |
| static const struct ddi_buf_trans bdw_ddi_translations_edp[] = { |
| { 0x00FFFFFF, 0x00000012, 0x0 }, |
| { 0x00EBAFFF, 0x00020011, 0x0 }, |
| { 0x00C71FFF, 0x0006000F, 0x0 }, |
| { 0x00AAAFFF, 0x000E000A, 0x0 }, |
| { 0x00FFFFFF, 0x00020011, 0x0 }, |
| { 0x00DB6FFF, 0x0005000F, 0x0 }, |
| { 0x00BEEFFF, 0x000A000C, 0x0 }, |
| { 0x00FFFFFF, 0x0005000F, 0x0 }, |
| { 0x00DB6FFF, 0x000A000C, 0x0 }, |
| }; |
| |
| static const struct ddi_buf_trans bdw_ddi_translations_dp[] = { |
| { 0x00FFFFFF, 0x0007000E, 0x0 }, |
| { 0x00D75FFF, 0x000E000A, 0x0 }, |
| { 0x00BEFFFF, 0x00140006, 0x0 }, |
| { 0x80B2CFFF, 0x001B0002, 0x0 }, |
| { 0x00FFFFFF, 0x000E000A, 0x0 }, |
| { 0x00DB6FFF, 0x00160005, 0x0 }, |
| { 0x80C71FFF, 0x001A0002, 0x0 }, |
| { 0x00F7DFFF, 0x00180004, 0x0 }, |
| { 0x80D75FFF, 0x001B0002, 0x0 }, |
| }; |
| |
| static const struct ddi_buf_trans bdw_ddi_translations_fdi[] = { |
| { 0x00FFFFFF, 0x0001000E, 0x0 }, |
| { 0x00D75FFF, 0x0004000A, 0x0 }, |
| { 0x00C30FFF, 0x00070006, 0x0 }, |
| { 0x00AAAFFF, 0x000C0000, 0x0 }, |
| { 0x00FFFFFF, 0x0004000A, 0x0 }, |
| { 0x00D75FFF, 0x00090004, 0x0 }, |
| { 0x00C30FFF, 0x000C0000, 0x0 }, |
| { 0x00FFFFFF, 0x00070006, 0x0 }, |
| { 0x00D75FFF, 0x000C0000, 0x0 }, |
| }; |
| |
| static const struct ddi_buf_trans bdw_ddi_translations_hdmi[] = { |
| /* Idx NT mV d T mV df db */ |
| { 0x00FFFFFF, 0x0007000E, 0x0 },/* 0: 400 400 0 */ |
| { 0x00D75FFF, 0x000E000A, 0x0 },/* 1: 400 600 3.5 */ |
| { 0x00BEFFFF, 0x00140006, 0x0 },/* 2: 400 800 6 */ |
| { 0x00FFFFFF, 0x0009000D, 0x0 },/* 3: 450 450 0 */ |
| { 0x00FFFFFF, 0x000E000A, 0x0 },/* 4: 600 600 0 */ |
| { 0x00D7FFFF, 0x00140006, 0x0 },/* 5: 600 800 2.5 */ |
| { 0x80CB2FFF, 0x001B0002, 0x0 },/* 6: 600 1000 4.5 */ |
| { 0x00FFFFFF, 0x00140006, 0x0 },/* 7: 800 800 0 */ |
| { 0x80E79FFF, 0x001B0002, 0x0 },/* 8: 800 1000 2 */ |
| { 0x80FFFFFF, 0x001B0002, 0x0 },/* 9: 1000 1000 0 */ |
| }; |
| |
| /* Skylake H and S */ |
| static const struct ddi_buf_trans skl_ddi_translations_dp[] = { |
| { 0x00002016, 0x000000A0, 0x0 }, |
| { 0x00005012, 0x0000009B, 0x0 }, |
| { 0x00007011, 0x00000088, 0x0 }, |
| { 0x80009010, 0x000000C0, 0x1 }, |
| { 0x00002016, 0x0000009B, 0x0 }, |
| { 0x00005012, 0x00000088, 0x0 }, |
| { 0x80007011, 0x000000C0, 0x1 }, |
| { 0x00002016, 0x000000DF, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x1 }, |
| }; |
| |
| /* Skylake U */ |
| static const struct ddi_buf_trans skl_u_ddi_translations_dp[] = { |
| { 0x0000201B, 0x000000A2, 0x0 }, |
| { 0x00005012, 0x00000088, 0x0 }, |
| { 0x80007011, 0x000000CD, 0x0 }, |
| { 0x80009010, 0x000000C0, 0x1 }, |
| { 0x0000201B, 0x0000009D, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x1 }, |
| { 0x80007011, 0x000000C0, 0x1 }, |
| { 0x00002016, 0x00000088, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x1 }, |
| }; |
| |
| /* Skylake Y */ |
| static const struct ddi_buf_trans skl_y_ddi_translations_dp[] = { |
| { 0x00000018, 0x000000A2, 0x0 }, |
| { 0x00005012, 0x00000088, 0x0 }, |
| { 0x80007011, 0x000000CD, 0x0 }, |
| { 0x80009010, 0x000000C0, 0x3 }, |
| { 0x00000018, 0x0000009D, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x3 }, |
| { 0x80007011, 0x000000C0, 0x3 }, |
| { 0x00000018, 0x00000088, 0x0 }, |
| { 0x80005012, 0x000000C0, 0x3 }, |
| }; |
| |
| /* |
| * Skylake H and S |
| * eDP 1.4 low vswing translation parameters |
| */ |
| static const struct ddi_buf_trans skl_ddi_translations_edp[] = { |
| { 0x00000018, 0x000000A8, 0x0 }, |
| { 0x00004013, 0x000000A9, 0x0 }, |
| { 0x00007011, 0x000000A2, 0x0 }, |
| { 0x00009010, 0x0000009C, 0x0 }, |
| { 0x00000018, 0x000000A9, 0x0 }, |
| { 0x00006013, 0x000000A2, 0x0 }, |
| { 0x00007011, 0x000000A6, 0x0 }, |
| { 0x00000018, 0x000000AB, 0x0 }, |
| { 0x00007013, 0x0000009F, 0x0 }, |
| { 0x00000018, 0x000000DF, 0x0 }, |
| }; |
| |
| /* |
| * Skylake U |
| * eDP 1.4 low vswing translation parameters |
| */ |
| static const struct ddi_buf_trans skl_u_ddi_translations_edp[] = { |
| { 0x00000018, 0x000000A8, 0x0 }, |
| { 0x00004013, 0x000000A9, 0x0 }, |
| { 0x00007011, 0x000000A2, 0x0 }, |
| { 0x00009010, 0x0000009C, 0x0 }, |
| { 0x00000018, 0x000000A9, 0x0 }, |
| { 0x00006013, 0x000000A2, 0x0 }, |
| { 0x00007011, 0x000000A6, 0x0 }, |
| { 0x00002016, 0x000000AB, 0x0 }, |
| { 0x00005013, 0x0000009F, 0x0 }, |
| { 0x00000018, 0x000000DF, 0x0 }, |
| }; |
| |
| /* |
| * Skylake Y |
| * eDP 1.4 low vswing translation parameters |
| */ |
| static const struct ddi_buf_trans skl_y_ddi_translations_edp[] = { |
| { 0x00000018, 0x000000A8, 0x0 }, |
| { 0x00004013, 0x000000AB, 0x0 }, |
| { 0x00007011, 0x000000A4, 0x0 }, |
| { 0x00009010, 0x000000DF, 0x0 }, |
| { 0x00000018, 0x000000AA, 0x0 }, |
| { 0x00006013, 0x000000A4, 0x0 }, |
| { 0x00007011, 0x0000009D, 0x0 }, |
| { 0x00000018, 0x000000A0, 0x0 }, |
| { 0x00006012, 0x000000DF, 0x0 }, |
| { 0x00000018, 0x0000008A, 0x0 }, |
| }; |
| |
| /* Skylake U, H and S */ |
| static const struct ddi_buf_trans skl_ddi_translations_hdmi[] = { |
| { 0x00000018, 0x000000AC, 0x0 }, |
| { 0x00005012, 0x0000009D, 0x0 }, |
| { 0x00007011, 0x00000088, 0x0 }, |
| { 0x00000018, 0x000000A1, 0x0 }, |
| { 0x00000018, 0x00000098, 0x0 }, |
| { 0x00004013, 0x00000088, 0x0 }, |
| { 0x80006012, 0x000000CD, 0x1 }, |
| { 0x00000018, 0x000000DF, 0x0 }, |
| { 0x80003015, 0x000000CD, 0x1 }, /* Default */ |
| { 0x80003015, 0x000000C0, 0x1 }, |
| { 0x80000018, 0x000000C0, 0x1 }, |
| }; |
| |
| /* Skylake Y */ |
| static const struct ddi_buf_trans skl_y_ddi_translations_hdmi[] = { |
| { 0x00000018, 0x000000A1, 0x0 }, |
| { 0x00005012, 0x000000DF, 0x0 }, |
| { 0x80007011, 0x000000CB, 0x3 }, |
| { 0x00000018, 0x000000A4, 0x0 }, |
| { 0x00000018, 0x0000009D, 0x0 }, |
| { 0x00004013, 0x00000080, 0x0 }, |
| { 0x80006013, 0x000000C0, 0x3 }, |
| { 0x00000018, 0x0000008A, 0x0 }, |
| { 0x80003015, 0x000000C0, 0x3 }, /* Default */ |
| { 0x80003015, 0x000000C0, 0x3 }, |
| { 0x80000018, 0x000000C0, 0x3 }, |
| }; |
| |
| struct bxt_ddi_buf_trans { |
| u32 margin; /* swing value */ |
| u32 scale; /* scale value */ |
| u32 enable; /* scale enable */ |
| u32 deemphasis; |
| bool default_index; /* true if the entry represents default value */ |
| }; |
| |
| static const struct bxt_ddi_buf_trans bxt_ddi_translations_dp[] = { |
| /* Idx NT mV diff db */ |
| { 52, 0x9A, 0, 128, true }, /* 0: 400 0 */ |
| { 78, 0x9A, 0, 85, false }, /* 1: 400 3.5 */ |
| { 104, 0x9A, 0, 64, false }, /* 2: 400 6 */ |
| { 154, 0x9A, 0, 43, false }, /* 3: 400 9.5 */ |
| { 77, 0x9A, 0, 128, false }, /* 4: 600 0 */ |
| { 116, 0x9A, 0, 85, false }, /* 5: 600 3.5 */ |
| { 154, 0x9A, 0, 64, false }, /* 6: 600 6 */ |
| { 102, 0x9A, 0, 128, false }, /* 7: 800 0 */ |
| { 154, 0x9A, 0, 85, false }, /* 8: 800 3.5 */ |
| { 154, 0x9A, 1, 128, false }, /* 9: 1200 0 */ |
| }; |
| |
| static const struct bxt_ddi_buf_trans bxt_ddi_translations_edp[] = { |
| /* Idx NT mV diff db */ |
| { 26, 0, 0, 128, false }, /* 0: 200 0 */ |
| { 38, 0, 0, 112, false }, /* 1: 200 1.5 */ |
| { 48, 0, 0, 96, false }, /* 2: 200 4 */ |
| { 54, 0, 0, 69, false }, /* 3: 200 6 */ |
| { 32, 0, 0, 128, false }, /* 4: 250 0 */ |
| { 48, 0, 0, 104, false }, /* 5: 250 1.5 */ |
| { 54, 0, 0, 85, false }, /* 6: 250 4 */ |
| { 43, 0, 0, 128, false }, /* 7: 300 0 */ |
| { 54, 0, 0, 101, false }, /* 8: 300 1.5 */ |
| { 48, 0, 0, 128, false }, /* 9: 300 0 */ |
| }; |
| |
| /* BSpec has 2 recommended values - entries 0 and 8. |
| * Using the entry with higher vswing. |
| */ |
| static const struct bxt_ddi_buf_trans bxt_ddi_translations_hdmi[] = { |
| /* Idx NT mV diff db */ |
| { 52, 0x9A, 0, 128, false }, /* 0: 400 0 */ |
| { 52, 0x9A, 0, 85, false }, /* 1: 400 3.5 */ |
| { 52, 0x9A, 0, 64, false }, /* 2: 400 6 */ |
| { 42, 0x9A, 0, 43, false }, /* 3: 400 9.5 */ |
| { 77, 0x9A, 0, 128, false }, /* 4: 600 0 */ |
| { 77, 0x9A, 0, 85, false }, /* 5: 600 3.5 */ |
| { 77, 0x9A, 0, 64, false }, /* 6: 600 6 */ |
| { 102, 0x9A, 0, 128, false }, /* 7: 800 0 */ |
| { 102, 0x9A, 0, 85, false }, /* 8: 800 3.5 */ |
| { 154, 0x9A, 1, 128, true }, /* 9: 1200 0 */ |
| }; |
| |
| static void bxt_ddi_vswing_sequence(struct drm_i915_private *dev_priv, |
| u32 level, enum port port, int type); |
| |
| static void ddi_get_encoder_port(struct intel_encoder *intel_encoder, |
| struct intel_digital_port **dig_port, |
| enum port *port) |
| { |
| struct drm_encoder *encoder = &intel_encoder->base; |
| |
| switch (intel_encoder->type) { |
| case INTEL_OUTPUT_DP_MST: |
| *dig_port = enc_to_mst(encoder)->primary; |
| *port = (*dig_port)->port; |
| break; |
| default: |
| WARN(1, "Invalid DDI encoder type %d\n", intel_encoder->type); |
| /* fallthrough and treat as unknown */ |
| case INTEL_OUTPUT_DISPLAYPORT: |
| case INTEL_OUTPUT_EDP: |
| case INTEL_OUTPUT_HDMI: |
| case INTEL_OUTPUT_UNKNOWN: |
| *dig_port = enc_to_dig_port(encoder); |
| *port = (*dig_port)->port; |
| break; |
| case INTEL_OUTPUT_ANALOG: |
| *dig_port = NULL; |
| *port = PORT_E; |
| break; |
| } |
| } |
| |
| enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder) |
| { |
| struct intel_digital_port *dig_port; |
| enum port port; |
| |
| ddi_get_encoder_port(intel_encoder, &dig_port, &port); |
| |
| return port; |
| } |
| |
| static const struct ddi_buf_trans * |
| skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) |
| { |
| if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { |
| *n_entries = ARRAY_SIZE(skl_y_ddi_translations_dp); |
| return skl_y_ddi_translations_dp; |
| } else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv)) { |
| *n_entries = ARRAY_SIZE(skl_u_ddi_translations_dp); |
| return skl_u_ddi_translations_dp; |
| } else { |
| *n_entries = ARRAY_SIZE(skl_ddi_translations_dp); |
| return skl_ddi_translations_dp; |
| } |
| } |
| |
| static const struct ddi_buf_trans * |
| skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) |
| { |
| if (dev_priv->vbt.edp.low_vswing) { |
| if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { |
| *n_entries = ARRAY_SIZE(skl_y_ddi_translations_edp); |
| return skl_y_ddi_translations_edp; |
| } else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv)) { |
| *n_entries = ARRAY_SIZE(skl_u_ddi_translations_edp); |
| return skl_u_ddi_translations_edp; |
| } else { |
| *n_entries = ARRAY_SIZE(skl_ddi_translations_edp); |
| return skl_ddi_translations_edp; |
| } |
| } |
| |
| return skl_get_buf_trans_dp(dev_priv, n_entries); |
| } |
| |
| static const struct ddi_buf_trans * |
| skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries) |
| { |
| if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { |
| *n_entries = ARRAY_SIZE(skl_y_ddi_translations_hdmi); |
| return skl_y_ddi_translations_hdmi; |
| } else { |
| *n_entries = ARRAY_SIZE(skl_ddi_translations_hdmi); |
| return skl_ddi_translations_hdmi; |
| } |
| } |
| |
| /* |
| * Starting with Haswell, DDI port buffers must be programmed with correct |
| * values in advance. The buffer values are different for FDI and DP modes, |
| * but the HDMI/DVI fields are shared among those. So we program the DDI |
| * in either FDI or DP modes only, as HDMI connections will work with both |
| * of those |
| */ |
| void intel_prepare_ddi_buffer(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| u32 iboost_bit = 0; |
| int i, n_hdmi_entries, n_dp_entries, n_edp_entries, hdmi_default_entry, |
| size; |
| int hdmi_level; |
| enum port port; |
| const struct ddi_buf_trans *ddi_translations_fdi; |
| const struct ddi_buf_trans *ddi_translations_dp; |
| const struct ddi_buf_trans *ddi_translations_edp; |
| const struct ddi_buf_trans *ddi_translations_hdmi; |
| const struct ddi_buf_trans *ddi_translations; |
| |
| port = intel_ddi_get_encoder_port(encoder); |
| hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift; |
| |
| if (IS_BROXTON(dev_priv)) { |
| if (encoder->type != INTEL_OUTPUT_HDMI) |
| return; |
| |
| /* Vswing programming for HDMI */ |
| bxt_ddi_vswing_sequence(dev_priv, hdmi_level, port, |
| INTEL_OUTPUT_HDMI); |
| return; |
| } |
| |
| if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { |
| ddi_translations_fdi = NULL; |
| ddi_translations_dp = |
| skl_get_buf_trans_dp(dev_priv, &n_dp_entries); |
| ddi_translations_edp = |
| skl_get_buf_trans_edp(dev_priv, &n_edp_entries); |
| ddi_translations_hdmi = |
| skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries); |
| hdmi_default_entry = 8; |
| /* If we're boosting the current, set bit 31 of trans1 */ |
| if (dev_priv->vbt.ddi_port_info[port].hdmi_boost_level || |
| dev_priv->vbt.ddi_port_info[port].dp_boost_level) |
| iboost_bit = 1<<31; |
| |
| if (WARN_ON(encoder->type == INTEL_OUTPUT_EDP && |
| port != PORT_A && port != PORT_E && |
| n_edp_entries > 9)) |
| n_edp_entries = 9; |
| } else if (IS_BROADWELL(dev_priv)) { |
| ddi_translations_fdi = bdw_ddi_translations_fdi; |
| ddi_translations_dp = bdw_ddi_translations_dp; |
| ddi_translations_edp = bdw_ddi_translations_edp; |
| ddi_translations_hdmi = bdw_ddi_translations_hdmi; |
| n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp); |
| n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); |
| n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); |
| hdmi_default_entry = 7; |
| } else if (IS_HASWELL(dev_priv)) { |
| ddi_translations_fdi = hsw_ddi_translations_fdi; |
| ddi_translations_dp = hsw_ddi_translations_dp; |
| ddi_translations_edp = hsw_ddi_translations_dp; |
| ddi_translations_hdmi = hsw_ddi_translations_hdmi; |
| n_dp_entries = n_edp_entries = ARRAY_SIZE(hsw_ddi_translations_dp); |
| n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); |
| hdmi_default_entry = 6; |
| } else { |
| WARN(1, "ddi translation table missing\n"); |
| ddi_translations_edp = bdw_ddi_translations_dp; |
| ddi_translations_fdi = bdw_ddi_translations_fdi; |
| ddi_translations_dp = bdw_ddi_translations_dp; |
| ddi_translations_hdmi = bdw_ddi_translations_hdmi; |
| n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp); |
| n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); |
| n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); |
| hdmi_default_entry = 7; |
| } |
| |
| switch (encoder->type) { |
| case INTEL_OUTPUT_EDP: |
| ddi_translations = ddi_translations_edp; |
| size = n_edp_entries; |
| break; |
| case INTEL_OUTPUT_DISPLAYPORT: |
| case INTEL_OUTPUT_HDMI: |
| ddi_translations = ddi_translations_dp; |
| size = n_dp_entries; |
| break; |
| case INTEL_OUTPUT_ANALOG: |
| ddi_translations = ddi_translations_fdi; |
| size = n_dp_entries; |
| break; |
| default: |
| BUG(); |
| } |
| |
| for (i = 0; i < size; i++) { |
| I915_WRITE(DDI_BUF_TRANS_LO(port, i), |
| ddi_translations[i].trans1 | iboost_bit); |
| I915_WRITE(DDI_BUF_TRANS_HI(port, i), |
| ddi_translations[i].trans2); |
| } |
| |
| if (encoder->type != INTEL_OUTPUT_HDMI) |
| return; |
| |
| /* Choose a good default if VBT is badly populated */ |
| if (hdmi_level == HDMI_LEVEL_SHIFT_UNKNOWN || |
| hdmi_level >= n_hdmi_entries) |
| hdmi_level = hdmi_default_entry; |
| |
| /* Entry 9 is for HDMI: */ |
| I915_WRITE(DDI_BUF_TRANS_LO(port, i), |
| ddi_translations_hdmi[hdmi_level].trans1 | iboost_bit); |
| I915_WRITE(DDI_BUF_TRANS_HI(port, i), |
| ddi_translations_hdmi[hdmi_level].trans2); |
| } |
| |
| static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| i915_reg_t reg = DDI_BUF_CTL(port); |
| int i; |
| |
| for (i = 0; i < 16; i++) { |
| udelay(1); |
| if (I915_READ(reg) & DDI_BUF_IS_IDLE) |
| return; |
| } |
| DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port)); |
| } |
| |
| /* Starting with Haswell, different DDI ports can work in FDI mode for |
| * connection to the PCH-located connectors. For this, it is necessary to train |
| * both the DDI port and PCH receiver for the desired DDI buffer settings. |
| * |
| * The recommended port to work in FDI mode is DDI E, which we use here. Also, |
| * please note that when FDI mode is active on DDI E, it shares 2 lines with |
| * DDI A (which is used for eDP) |
| */ |
| |
| void hsw_fdi_link_train(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct intel_encoder *encoder; |
| u32 temp, i, rx_ctl_val; |
| |
| for_each_encoder_on_crtc(dev, crtc, encoder) { |
| WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG); |
| intel_prepare_ddi_buffer(encoder); |
| } |
| |
| /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the |
| * mode set "sequence for CRT port" document: |
| * - TP1 to TP2 time with the default value |
| * - FDI delay to 90h |
| * |
| * WaFDIAutoLinkSetTimingOverrride:hsw |
| */ |
| I915_WRITE(FDI_RX_MISC(PIPE_A), FDI_RX_PWRDN_LANE1_VAL(2) | |
| FDI_RX_PWRDN_LANE0_VAL(2) | |
| FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90); |
| |
| /* Enable the PCH Receiver FDI PLL */ |
| rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE | |
| FDI_RX_PLL_ENABLE | |
| FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes); |
| I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); |
| POSTING_READ(FDI_RX_CTL(PIPE_A)); |
| udelay(220); |
| |
| /* Switch from Rawclk to PCDclk */ |
| rx_ctl_val |= FDI_PCDCLK; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); |
| |
| /* Configure Port Clock Select */ |
| I915_WRITE(PORT_CLK_SEL(PORT_E), intel_crtc->config->ddi_pll_sel); |
| WARN_ON(intel_crtc->config->ddi_pll_sel != PORT_CLK_SEL_SPLL); |
| |
| /* Start the training iterating through available voltages and emphasis, |
| * testing each value twice. */ |
| for (i = 0; i < ARRAY_SIZE(hsw_ddi_translations_fdi) * 2; i++) { |
| /* Configure DP_TP_CTL with auto-training */ |
| I915_WRITE(DP_TP_CTL(PORT_E), |
| DP_TP_CTL_FDI_AUTOTRAIN | |
| DP_TP_CTL_ENHANCED_FRAME_ENABLE | |
| DP_TP_CTL_LINK_TRAIN_PAT1 | |
| DP_TP_CTL_ENABLE); |
| |
| /* Configure and enable DDI_BUF_CTL for DDI E with next voltage. |
| * DDI E does not support port reversal, the functionality is |
| * achieved on the PCH side in FDI_RX_CTL, so no need to set the |
| * port reversal bit */ |
| I915_WRITE(DDI_BUF_CTL(PORT_E), |
| DDI_BUF_CTL_ENABLE | |
| ((intel_crtc->config->fdi_lanes - 1) << 1) | |
| DDI_BUF_TRANS_SELECT(i / 2)); |
| POSTING_READ(DDI_BUF_CTL(PORT_E)); |
| |
| udelay(600); |
| |
| /* Program PCH FDI Receiver TU */ |
| I915_WRITE(FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64)); |
| |
| /* Enable PCH FDI Receiver with auto-training */ |
| rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); |
| POSTING_READ(FDI_RX_CTL(PIPE_A)); |
| |
| /* Wait for FDI receiver lane calibration */ |
| udelay(30); |
| |
| /* Unset FDI_RX_MISC pwrdn lanes */ |
| temp = I915_READ(FDI_RX_MISC(PIPE_A)); |
| temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); |
| I915_WRITE(FDI_RX_MISC(PIPE_A), temp); |
| POSTING_READ(FDI_RX_MISC(PIPE_A)); |
| |
| /* Wait for FDI auto training time */ |
| udelay(5); |
| |
| temp = I915_READ(DP_TP_STATUS(PORT_E)); |
| if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) { |
| DRM_DEBUG_KMS("FDI link training done on step %d\n", i); |
| break; |
| } |
| |
| /* |
| * Leave things enabled even if we failed to train FDI. |
| * Results in less fireworks from the state checker. |
| */ |
| if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) { |
| DRM_ERROR("FDI link training failed!\n"); |
| break; |
| } |
| |
| rx_ctl_val &= ~FDI_RX_ENABLE; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); |
| POSTING_READ(FDI_RX_CTL(PIPE_A)); |
| |
| temp = I915_READ(DDI_BUF_CTL(PORT_E)); |
| temp &= ~DDI_BUF_CTL_ENABLE; |
| I915_WRITE(DDI_BUF_CTL(PORT_E), temp); |
| POSTING_READ(DDI_BUF_CTL(PORT_E)); |
| |
| /* Disable DP_TP_CTL and FDI_RX_CTL and retry */ |
| temp = I915_READ(DP_TP_CTL(PORT_E)); |
| temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); |
| temp |= DP_TP_CTL_LINK_TRAIN_PAT1; |
| I915_WRITE(DP_TP_CTL(PORT_E), temp); |
| POSTING_READ(DP_TP_CTL(PORT_E)); |
| |
| intel_wait_ddi_buf_idle(dev_priv, PORT_E); |
| |
| /* Reset FDI_RX_MISC pwrdn lanes */ |
| temp = I915_READ(FDI_RX_MISC(PIPE_A)); |
| temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); |
| temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); |
| I915_WRITE(FDI_RX_MISC(PIPE_A), temp); |
| POSTING_READ(FDI_RX_MISC(PIPE_A)); |
| } |
| |
| /* Enable normal pixel sending for FDI */ |
| I915_WRITE(DP_TP_CTL(PORT_E), |
| DP_TP_CTL_FDI_AUTOTRAIN | |
| DP_TP_CTL_LINK_TRAIN_NORMAL | |
| DP_TP_CTL_ENHANCED_FRAME_ENABLE | |
| DP_TP_CTL_ENABLE); |
| } |
| |
| void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); |
| struct intel_digital_port *intel_dig_port = |
| enc_to_dig_port(&encoder->base); |
| |
| intel_dp->DP = intel_dig_port->saved_port_bits | |
| DDI_BUF_CTL_ENABLE | DDI_BUF_TRANS_SELECT(0); |
| intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count); |
| } |
| |
| static struct intel_encoder * |
| intel_ddi_get_crtc_encoder(struct drm_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->dev; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct intel_encoder *intel_encoder, *ret = NULL; |
| int num_encoders = 0; |
| |
| for_each_encoder_on_crtc(dev, crtc, intel_encoder) { |
| ret = intel_encoder; |
| num_encoders++; |
| } |
| |
| if (num_encoders != 1) |
| WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders, |
| pipe_name(intel_crtc->pipe)); |
| |
| BUG_ON(ret == NULL); |
| return ret; |
| } |
| |
| struct intel_encoder * |
| intel_ddi_get_crtc_new_encoder(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); |
| struct intel_encoder *ret = NULL; |
| struct drm_atomic_state *state; |
| struct drm_connector *connector; |
| struct drm_connector_state *connector_state; |
| int num_encoders = 0; |
| int i; |
| |
| state = crtc_state->base.state; |
| |
| for_each_connector_in_state(state, connector, connector_state, i) { |
| if (connector_state->crtc != crtc_state->base.crtc) |
| continue; |
| |
| ret = to_intel_encoder(connector_state->best_encoder); |
| num_encoders++; |
| } |
| |
| WARN(num_encoders != 1, "%d encoders on crtc for pipe %c\n", num_encoders, |
| pipe_name(crtc->pipe)); |
| |
| BUG_ON(ret == NULL); |
| return ret; |
| } |
| |
| #define LC_FREQ 2700 |
| |
| static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv, |
| i915_reg_t reg) |
| { |
| int refclk = LC_FREQ; |
| int n, p, r; |
| u32 wrpll; |
| |
| wrpll = I915_READ(reg); |
| switch (wrpll & WRPLL_PLL_REF_MASK) { |
| case WRPLL_PLL_SSC: |
| case WRPLL_PLL_NON_SSC: |
| /* |
| * We could calculate spread here, but our checking |
| * code only cares about 5% accuracy, and spread is a max of |
| * 0.5% downspread. |
| */ |
| refclk = 135; |
| break; |
| case WRPLL_PLL_LCPLL: |
| refclk = LC_FREQ; |
| break; |
| default: |
| WARN(1, "bad wrpll refclk\n"); |
| return 0; |
| } |
| |
| r = wrpll & WRPLL_DIVIDER_REF_MASK; |
| p = (wrpll & WRPLL_DIVIDER_POST_MASK) >> WRPLL_DIVIDER_POST_SHIFT; |
| n = (wrpll & WRPLL_DIVIDER_FB_MASK) >> WRPLL_DIVIDER_FB_SHIFT; |
| |
| /* Convert to KHz, p & r have a fixed point portion */ |
| return (refclk * n * 100) / (p * r); |
| } |
| |
| static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv, |
| uint32_t dpll) |
| { |
| i915_reg_t cfgcr1_reg, cfgcr2_reg; |
| uint32_t cfgcr1_val, cfgcr2_val; |
| uint32_t p0, p1, p2, dco_freq; |
| |
| cfgcr1_reg = DPLL_CFGCR1(dpll); |
| cfgcr2_reg = DPLL_CFGCR2(dpll); |
| |
| cfgcr1_val = I915_READ(cfgcr1_reg); |
| cfgcr2_val = I915_READ(cfgcr2_reg); |
| |
| p0 = cfgcr2_val & DPLL_CFGCR2_PDIV_MASK; |
| p2 = cfgcr2_val & DPLL_CFGCR2_KDIV_MASK; |
| |
| if (cfgcr2_val & DPLL_CFGCR2_QDIV_MODE(1)) |
| p1 = (cfgcr2_val & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8; |
| else |
| p1 = 1; |
| |
| |
| switch (p0) { |
| case DPLL_CFGCR2_PDIV_1: |
| p0 = 1; |
| break; |
| case DPLL_CFGCR2_PDIV_2: |
| p0 = 2; |
| break; |
| case DPLL_CFGCR2_PDIV_3: |
| p0 = 3; |
| break; |
| case DPLL_CFGCR2_PDIV_7: |
| p0 = 7; |
| break; |
| } |
| |
| switch (p2) { |
| case DPLL_CFGCR2_KDIV_5: |
| p2 = 5; |
| break; |
| case DPLL_CFGCR2_KDIV_2: |
| p2 = 2; |
| break; |
| case DPLL_CFGCR2_KDIV_3: |
| p2 = 3; |
| break; |
| case DPLL_CFGCR2_KDIV_1: |
| p2 = 1; |
| break; |
| } |
| |
| dco_freq = (cfgcr1_val & DPLL_CFGCR1_DCO_INTEGER_MASK) * 24 * 1000; |
| |
| dco_freq += (((cfgcr1_val & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9) * 24 * |
| 1000) / 0x8000; |
| |
| return dco_freq / (p0 * p1 * p2 * 5); |
| } |
| |
| static void ddi_dotclock_get(struct intel_crtc_state *pipe_config) |
| { |
| int dotclock; |
| |
| if (pipe_config->has_pch_encoder) |
| dotclock = intel_dotclock_calculate(pipe_config->port_clock, |
| &pipe_config->fdi_m_n); |
| else if (pipe_config->has_dp_encoder) |
| dotclock = intel_dotclock_calculate(pipe_config->port_clock, |
| &pipe_config->dp_m_n); |
| else if (pipe_config->has_hdmi_sink && pipe_config->pipe_bpp == 36) |
| dotclock = pipe_config->port_clock * 2 / 3; |
| else |
| dotclock = pipe_config->port_clock; |
| |
| if (pipe_config->pixel_multiplier) |
| dotclock /= pipe_config->pixel_multiplier; |
| |
| pipe_config->base.adjusted_mode.crtc_clock = dotclock; |
| } |
| |
| static void skl_ddi_clock_get(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| int link_clock = 0; |
| uint32_t dpll_ctl1, dpll; |
| |
| dpll = pipe_config->ddi_pll_sel; |
| |
| dpll_ctl1 = I915_READ(DPLL_CTRL1); |
| |
| if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(dpll)) { |
| link_clock = skl_calc_wrpll_link(dev_priv, dpll); |
| } else { |
| link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(dpll); |
| link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(dpll); |
| |
| switch (link_clock) { |
| case DPLL_CTRL1_LINK_RATE_810: |
| link_clock = 81000; |
| break; |
| case DPLL_CTRL1_LINK_RATE_1080: |
| link_clock = 108000; |
| break; |
| case DPLL_CTRL1_LINK_RATE_1350: |
| link_clock = 135000; |
| break; |
| case DPLL_CTRL1_LINK_RATE_1620: |
| link_clock = 162000; |
| break; |
| case DPLL_CTRL1_LINK_RATE_2160: |
| link_clock = 216000; |
| break; |
| case DPLL_CTRL1_LINK_RATE_2700: |
| link_clock = 270000; |
| break; |
| default: |
| WARN(1, "Unsupported link rate\n"); |
| break; |
| } |
| link_clock *= 2; |
| } |
| |
| pipe_config->port_clock = link_clock; |
| |
| ddi_dotclock_get(pipe_config); |
| } |
| |
| static void hsw_ddi_clock_get(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| int link_clock = 0; |
| u32 val, pll; |
| |
| val = pipe_config->ddi_pll_sel; |
| switch (val & PORT_CLK_SEL_MASK) { |
| case PORT_CLK_SEL_LCPLL_810: |
| link_clock = 81000; |
| break; |
| case PORT_CLK_SEL_LCPLL_1350: |
| link_clock = 135000; |
| break; |
| case PORT_CLK_SEL_LCPLL_2700: |
| link_clock = 270000; |
| break; |
| case PORT_CLK_SEL_WRPLL1: |
| link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(0)); |
| break; |
| case PORT_CLK_SEL_WRPLL2: |
| link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(1)); |
| break; |
| case PORT_CLK_SEL_SPLL: |
| pll = I915_READ(SPLL_CTL) & SPLL_PLL_FREQ_MASK; |
| if (pll == SPLL_PLL_FREQ_810MHz) |
| link_clock = 81000; |
| else if (pll == SPLL_PLL_FREQ_1350MHz) |
| link_clock = 135000; |
| else if (pll == SPLL_PLL_FREQ_2700MHz) |
| link_clock = 270000; |
| else { |
| WARN(1, "bad spll freq\n"); |
| return; |
| } |
| break; |
| default: |
| WARN(1, "bad port clock sel\n"); |
| return; |
| } |
| |
| pipe_config->port_clock = link_clock * 2; |
| |
| ddi_dotclock_get(pipe_config); |
| } |
| |
| static int bxt_calc_pll_link(struct drm_i915_private *dev_priv, |
| enum intel_dpll_id dpll) |
| { |
| struct intel_shared_dpll *pll; |
| struct intel_dpll_hw_state *state; |
| intel_clock_t clock; |
| |
| /* For DDI ports we always use a shared PLL. */ |
| if (WARN_ON(dpll == DPLL_ID_PRIVATE)) |
| return 0; |
| |
| pll = &dev_priv->shared_dplls[dpll]; |
| state = &pll->config.hw_state; |
| |
| clock.m1 = 2; |
| clock.m2 = (state->pll0 & PORT_PLL_M2_MASK) << 22; |
| if (state->pll3 & PORT_PLL_M2_FRAC_ENABLE) |
| clock.m2 |= state->pll2 & PORT_PLL_M2_FRAC_MASK; |
| clock.n = (state->pll1 & PORT_PLL_N_MASK) >> PORT_PLL_N_SHIFT; |
| clock.p1 = (state->ebb0 & PORT_PLL_P1_MASK) >> PORT_PLL_P1_SHIFT; |
| clock.p2 = (state->ebb0 & PORT_PLL_P2_MASK) >> PORT_PLL_P2_SHIFT; |
| |
| return chv_calc_dpll_params(100000, &clock); |
| } |
| |
| static void bxt_ddi_clock_get(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| uint32_t dpll = port; |
| |
| pipe_config->port_clock = bxt_calc_pll_link(dev_priv, dpll); |
| |
| ddi_dotclock_get(pipe_config); |
| } |
| |
| void intel_ddi_clock_get(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| |
| if (INTEL_INFO(dev)->gen <= 8) |
| hsw_ddi_clock_get(encoder, pipe_config); |
| else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) |
| skl_ddi_clock_get(encoder, pipe_config); |
| else if (IS_BROXTON(dev)) |
| bxt_ddi_clock_get(encoder, pipe_config); |
| } |
| |
| static bool |
| hsw_ddi_pll_select(struct intel_crtc *intel_crtc, |
| struct intel_crtc_state *crtc_state, |
| struct intel_encoder *intel_encoder) |
| { |
| struct intel_shared_dpll *pll; |
| |
| pll = intel_get_shared_dpll(intel_crtc, crtc_state, |
| intel_encoder); |
| if (!pll) |
| DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", |
| pipe_name(intel_crtc->pipe)); |
| |
| return pll; |
| } |
| |
| static bool |
| skl_ddi_pll_select(struct intel_crtc *intel_crtc, |
| struct intel_crtc_state *crtc_state, |
| struct intel_encoder *intel_encoder) |
| { |
| struct intel_shared_dpll *pll; |
| |
| pll = intel_get_shared_dpll(intel_crtc, crtc_state, intel_encoder); |
| if (pll == NULL) { |
| DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", |
| pipe_name(intel_crtc->pipe)); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool |
| bxt_ddi_pll_select(struct intel_crtc *intel_crtc, |
| struct intel_crtc_state *crtc_state, |
| struct intel_encoder *intel_encoder) |
| { |
| return !!intel_get_shared_dpll(intel_crtc, crtc_state, intel_encoder); |
| } |
| |
| /* |
| * Tries to find a *shared* PLL for the CRTC and store it in |
| * intel_crtc->ddi_pll_sel. |
| * |
| * For private DPLLs, compute_config() should do the selection for us. This |
| * function should be folded into compute_config() eventually. |
| */ |
| bool intel_ddi_pll_select(struct intel_crtc *intel_crtc, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct drm_device *dev = intel_crtc->base.dev; |
| struct intel_encoder *intel_encoder = |
| intel_ddi_get_crtc_new_encoder(crtc_state); |
| |
| if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) |
| return skl_ddi_pll_select(intel_crtc, crtc_state, |
| intel_encoder); |
| else if (IS_BROXTON(dev)) |
| return bxt_ddi_pll_select(intel_crtc, crtc_state, |
| intel_encoder); |
| else |
| return hsw_ddi_pll_select(intel_crtc, crtc_state, |
| intel_encoder); |
| } |
| |
| void intel_ddi_set_pipe_settings(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); |
| enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; |
| int type = intel_encoder->type; |
| uint32_t temp; |
| |
| if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP || type == INTEL_OUTPUT_DP_MST) { |
| WARN_ON(transcoder_is_dsi(cpu_transcoder)); |
| |
| temp = TRANS_MSA_SYNC_CLK; |
| switch (intel_crtc->config->pipe_bpp) { |
| case 18: |
| temp |= TRANS_MSA_6_BPC; |
| break; |
| case 24: |
| temp |= TRANS_MSA_8_BPC; |
| break; |
| case 30: |
| temp |= TRANS_MSA_10_BPC; |
| break; |
| case 36: |
| temp |= TRANS_MSA_12_BPC; |
| break; |
| default: |
| BUG(); |
| } |
| I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp); |
| } |
| } |
| |
| void intel_ddi_set_vc_payload_alloc(struct drm_crtc *crtc, bool state) |
| { |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; |
| uint32_t temp; |
| temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| if (state == true) |
| temp |= TRANS_DDI_DP_VC_PAYLOAD_ALLOC; |
| else |
| temp &= ~TRANS_DDI_DP_VC_PAYLOAD_ALLOC; |
| I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); |
| } |
| |
| void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc) |
| { |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); |
| struct drm_encoder *encoder = &intel_encoder->base; |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum pipe pipe = intel_crtc->pipe; |
| enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; |
| enum port port = intel_ddi_get_encoder_port(intel_encoder); |
| int type = intel_encoder->type; |
| uint32_t temp; |
| |
| /* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */ |
| temp = TRANS_DDI_FUNC_ENABLE; |
| temp |= TRANS_DDI_SELECT_PORT(port); |
| |
| switch (intel_crtc->config->pipe_bpp) { |
| case 18: |
| temp |= TRANS_DDI_BPC_6; |
| break; |
| case 24: |
| temp |= TRANS_DDI_BPC_8; |
| break; |
| case 30: |
| temp |= TRANS_DDI_BPC_10; |
| break; |
| case 36: |
| temp |= TRANS_DDI_BPC_12; |
| break; |
| default: |
| BUG(); |
| } |
| |
| if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_PVSYNC) |
| temp |= TRANS_DDI_PVSYNC; |
| if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_PHSYNC) |
| temp |= TRANS_DDI_PHSYNC; |
| |
| if (cpu_transcoder == TRANSCODER_EDP) { |
| switch (pipe) { |
| case PIPE_A: |
| /* On Haswell, can only use the always-on power well for |
| * eDP when not using the panel fitter, and when not |
| * using motion blur mitigation (which we don't |
| * support). */ |
| if (IS_HASWELL(dev) && |
| (intel_crtc->config->pch_pfit.enabled || |
| intel_crtc->config->pch_pfit.force_thru)) |
| temp |= TRANS_DDI_EDP_INPUT_A_ONOFF; |
| else |
| temp |= TRANS_DDI_EDP_INPUT_A_ON; |
| break; |
| case PIPE_B: |
| temp |= TRANS_DDI_EDP_INPUT_B_ONOFF; |
| break; |
| case PIPE_C: |
| temp |= TRANS_DDI_EDP_INPUT_C_ONOFF; |
| break; |
| default: |
| BUG(); |
| break; |
| } |
| } |
| |
| if (type == INTEL_OUTPUT_HDMI) { |
| if (intel_crtc->config->has_hdmi_sink) |
| temp |= TRANS_DDI_MODE_SELECT_HDMI; |
| else |
| temp |= TRANS_DDI_MODE_SELECT_DVI; |
| |
| } else if (type == INTEL_OUTPUT_ANALOG) { |
| temp |= TRANS_DDI_MODE_SELECT_FDI; |
| temp |= (intel_crtc->config->fdi_lanes - 1) << 1; |
| |
| } else if (type == INTEL_OUTPUT_DISPLAYPORT || |
| type == INTEL_OUTPUT_EDP) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| if (intel_dp->is_mst) { |
| temp |= TRANS_DDI_MODE_SELECT_DP_MST; |
| } else |
| temp |= TRANS_DDI_MODE_SELECT_DP_SST; |
| |
| temp |= DDI_PORT_WIDTH(intel_crtc->config->lane_count); |
| } else if (type == INTEL_OUTPUT_DP_MST) { |
| struct intel_dp *intel_dp = &enc_to_mst(encoder)->primary->dp; |
| |
| if (intel_dp->is_mst) { |
| temp |= TRANS_DDI_MODE_SELECT_DP_MST; |
| } else |
| temp |= TRANS_DDI_MODE_SELECT_DP_SST; |
| |
| temp |= DDI_PORT_WIDTH(intel_crtc->config->lane_count); |
| } else { |
| WARN(1, "Invalid encoder type %d for pipe %c\n", |
| intel_encoder->type, pipe_name(pipe)); |
| } |
| |
| I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); |
| } |
| |
| void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv, |
| enum transcoder cpu_transcoder) |
| { |
| i915_reg_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder); |
| uint32_t val = I915_READ(reg); |
| |
| val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK | TRANS_DDI_DP_VC_PAYLOAD_ALLOC); |
| val |= TRANS_DDI_PORT_NONE; |
| I915_WRITE(reg, val); |
| } |
| |
| bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector) |
| { |
| struct drm_device *dev = intel_connector->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_encoder *intel_encoder = intel_connector->encoder; |
| int type = intel_connector->base.connector_type; |
| enum port port = intel_ddi_get_encoder_port(intel_encoder); |
| enum pipe pipe = 0; |
| enum transcoder cpu_transcoder; |
| enum intel_display_power_domain power_domain; |
| uint32_t tmp; |
| bool ret; |
| |
| power_domain = intel_display_port_power_domain(intel_encoder); |
| if (!intel_display_power_get_if_enabled(dev_priv, power_domain)) |
| return false; |
| |
| if (!intel_encoder->get_hw_state(intel_encoder, &pipe)) { |
| ret = false; |
| goto out; |
| } |
| |
| if (port == PORT_A) |
| cpu_transcoder = TRANSCODER_EDP; |
| else |
| cpu_transcoder = (enum transcoder) pipe; |
| |
| tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| |
| switch (tmp & TRANS_DDI_MODE_SELECT_MASK) { |
| case TRANS_DDI_MODE_SELECT_HDMI: |
| case TRANS_DDI_MODE_SELECT_DVI: |
| ret = type == DRM_MODE_CONNECTOR_HDMIA; |
| break; |
| |
| case TRANS_DDI_MODE_SELECT_DP_SST: |
| ret = type == DRM_MODE_CONNECTOR_eDP || |
| type == DRM_MODE_CONNECTOR_DisplayPort; |
| break; |
| |
| case TRANS_DDI_MODE_SELECT_DP_MST: |
| /* if the transcoder is in MST state then |
| * connector isn't connected */ |
| ret = false; |
| break; |
| |
| case TRANS_DDI_MODE_SELECT_FDI: |
| ret = type == DRM_MODE_CONNECTOR_VGA; |
| break; |
| |
| default: |
| ret = false; |
| break; |
| } |
| |
| out: |
| intel_display_power_put(dev_priv, power_domain); |
| |
| return ret; |
| } |
| |
| bool intel_ddi_get_hw_state(struct intel_encoder *encoder, |
| enum pipe *pipe) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| enum intel_display_power_domain power_domain; |
| u32 tmp; |
| int i; |
| bool ret; |
| |
| power_domain = intel_display_port_power_domain(encoder); |
| if (!intel_display_power_get_if_enabled(dev_priv, power_domain)) |
| return false; |
| |
| ret = false; |
| |
| tmp = I915_READ(DDI_BUF_CTL(port)); |
| |
| if (!(tmp & DDI_BUF_CTL_ENABLE)) |
| goto out; |
| |
| if (port == PORT_A) { |
| tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP)); |
| |
| switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { |
| case TRANS_DDI_EDP_INPUT_A_ON: |
| case TRANS_DDI_EDP_INPUT_A_ONOFF: |
| *pipe = PIPE_A; |
| break; |
| case TRANS_DDI_EDP_INPUT_B_ONOFF: |
| *pipe = PIPE_B; |
| break; |
| case TRANS_DDI_EDP_INPUT_C_ONOFF: |
| *pipe = PIPE_C; |
| break; |
| } |
| |
| ret = true; |
| |
| goto out; |
| } |
| |
| for (i = TRANSCODER_A; i <= TRANSCODER_C; i++) { |
| tmp = I915_READ(TRANS_DDI_FUNC_CTL(i)); |
| |
| if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(port)) { |
| if ((tmp & TRANS_DDI_MODE_SELECT_MASK) == |
| TRANS_DDI_MODE_SELECT_DP_MST) |
| goto out; |
| |
| *pipe = i; |
| ret = true; |
| |
| goto out; |
| } |
| } |
| |
| DRM_DEBUG_KMS("No pipe for ddi port %c found\n", port_name(port)); |
| |
| out: |
| intel_display_power_put(dev_priv, power_domain); |
| |
| return ret; |
| } |
| |
| void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc) |
| { |
| struct drm_crtc *crtc = &intel_crtc->base; |
| struct drm_device *dev = crtc->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); |
| enum port port = intel_ddi_get_encoder_port(intel_encoder); |
| enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; |
| |
| if (cpu_transcoder != TRANSCODER_EDP) |
| I915_WRITE(TRANS_CLK_SEL(cpu_transcoder), |
| TRANS_CLK_SEL_PORT(port)); |
| } |
| |
| void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc) |
| { |
| struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private; |
| enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; |
| |
| if (cpu_transcoder != TRANSCODER_EDP) |
| I915_WRITE(TRANS_CLK_SEL(cpu_transcoder), |
| TRANS_CLK_SEL_DISABLED); |
| } |
| |
| static void skl_ddi_set_iboost(struct drm_i915_private *dev_priv, |
| u32 level, enum port port, int type) |
| { |
| const struct ddi_buf_trans *ddi_translations; |
| uint8_t iboost; |
| uint8_t dp_iboost, hdmi_iboost; |
| int n_entries; |
| u32 reg; |
| |
| /* VBT may override standard boost values */ |
| dp_iboost = dev_priv->vbt.ddi_port_info[port].dp_boost_level; |
| hdmi_iboost = dev_priv->vbt.ddi_port_info[port].hdmi_boost_level; |
| |
| if (type == INTEL_OUTPUT_DISPLAYPORT) { |
| if (dp_iboost) { |
| iboost = dp_iboost; |
| } else { |
| ddi_translations = skl_get_buf_trans_dp(dev_priv, &n_entries); |
| iboost = ddi_translations[level].i_boost; |
| } |
| } else if (type == INTEL_OUTPUT_EDP) { |
| if (dp_iboost) { |
| iboost = dp_iboost; |
| } else { |
| ddi_translations = skl_get_buf_trans_edp(dev_priv, &n_entries); |
| |
| if (WARN_ON(port != PORT_A && |
| port != PORT_E && n_entries > 9)) |
| n_entries = 9; |
| |
| iboost = ddi_translations[level].i_boost; |
| } |
| } else if (type == INTEL_OUTPUT_HDMI) { |
| if (hdmi_iboost) { |
| iboost = hdmi_iboost; |
| } else { |
| ddi_translations = skl_get_buf_trans_hdmi(dev_priv, &n_entries); |
| iboost = ddi_translations[level].i_boost; |
| } |
| } else { |
| return; |
| } |
| |
| /* Make sure that the requested I_boost is valid */ |
| if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) { |
| DRM_ERROR("Invalid I_boost value %u\n", iboost); |
| return; |
| } |
| |
| reg = I915_READ(DISPIO_CR_TX_BMU_CR0); |
| reg &= ~BALANCE_LEG_MASK(port); |
| reg &= ~(1 << (BALANCE_LEG_DISABLE_SHIFT + port)); |
| |
| if (iboost) |
| reg |= iboost << BALANCE_LEG_SHIFT(port); |
| else |
| reg |= 1 << (BALANCE_LEG_DISABLE_SHIFT + port); |
| |
| I915_WRITE(DISPIO_CR_TX_BMU_CR0, reg); |
| } |
| |
| static void bxt_ddi_vswing_sequence(struct drm_i915_private *dev_priv, |
| u32 level, enum port port, int type) |
| { |
| const struct bxt_ddi_buf_trans *ddi_translations; |
| u32 n_entries, i; |
| uint32_t val; |
| |
| if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) { |
| n_entries = ARRAY_SIZE(bxt_ddi_translations_edp); |
| ddi_translations = bxt_ddi_translations_edp; |
| } else if (type == INTEL_OUTPUT_DISPLAYPORT |
| || type == INTEL_OUTPUT_EDP) { |
| n_entries = ARRAY_SIZE(bxt_ddi_translations_dp); |
| ddi_translations = bxt_ddi_translations_dp; |
| } else if (type == INTEL_OUTPUT_HDMI) { |
| n_entries = ARRAY_SIZE(bxt_ddi_translations_hdmi); |
| ddi_translations = bxt_ddi_translations_hdmi; |
| } else { |
| DRM_DEBUG_KMS("Vswing programming not done for encoder %d\n", |
| type); |
| return; |
| } |
| |
| /* Check if default value has to be used */ |
| if (level >= n_entries || |
| (type == INTEL_OUTPUT_HDMI && level == HDMI_LEVEL_SHIFT_UNKNOWN)) { |
| for (i = 0; i < n_entries; i++) { |
| if (ddi_translations[i].default_index) { |
| level = i; |
| break; |
| } |
| } |
| } |
| |
| /* |
| * While we write to the group register to program all lanes at once we |
| * can read only lane registers and we pick lanes 0/1 for that. |
| */ |
| val = I915_READ(BXT_PORT_PCS_DW10_LN01(port)); |
| val &= ~(TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT); |
| I915_WRITE(BXT_PORT_PCS_DW10_GRP(port), val); |
| |
| val = I915_READ(BXT_PORT_TX_DW2_LN0(port)); |
| val &= ~(MARGIN_000 | UNIQ_TRANS_SCALE); |
| val |= ddi_translations[level].margin << MARGIN_000_SHIFT | |
| ddi_translations[level].scale << UNIQ_TRANS_SCALE_SHIFT; |
| I915_WRITE(BXT_PORT_TX_DW2_GRP(port), val); |
| |
| val = I915_READ(BXT_PORT_TX_DW3_LN0(port)); |
| val &= ~SCALE_DCOMP_METHOD; |
| if (ddi_translations[level].enable) |
| val |= SCALE_DCOMP_METHOD; |
| |
| if ((val & UNIQUE_TRANGE_EN_METHOD) && !(val & SCALE_DCOMP_METHOD)) |
| DRM_ERROR("Disabled scaling while ouniqetrangenmethod was set"); |
| |
| I915_WRITE(BXT_PORT_TX_DW3_GRP(port), val); |
| |
| val = I915_READ(BXT_PORT_TX_DW4_LN0(port)); |
| val &= ~DE_EMPHASIS; |
| val |= ddi_translations[level].deemphasis << DEEMPH_SHIFT; |
| I915_WRITE(BXT_PORT_TX_DW4_GRP(port), val); |
| |
| val = I915_READ(BXT_PORT_PCS_DW10_LN01(port)); |
| val |= TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT; |
| I915_WRITE(BXT_PORT_PCS_DW10_GRP(port), val); |
| } |
| |
| static uint32_t translate_signal_level(int signal_levels) |
| { |
| uint32_t level; |
| |
| switch (signal_levels) { |
| default: |
| DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level: 0x%x\n", |
| signal_levels); |
| case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0: |
| level = 0; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1: |
| level = 1; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2: |
| level = 2; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3: |
| level = 3; |
| break; |
| |
| case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0: |
| level = 4; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1: |
| level = 5; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2: |
| level = 6; |
| break; |
| |
| case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0: |
| level = 7; |
| break; |
| case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1: |
| level = 8; |
| break; |
| |
| case DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0: |
| level = 9; |
| break; |
| } |
| |
| return level; |
| } |
| |
| uint32_t ddi_signal_levels(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *dport = dp_to_dig_port(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); |
| struct intel_encoder *encoder = &dport->base; |
| uint8_t train_set = intel_dp->train_set[0]; |
| int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | |
| DP_TRAIN_PRE_EMPHASIS_MASK); |
| enum port port = dport->port; |
| uint32_t level; |
| |
| level = translate_signal_level(signal_levels); |
| |
| if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) |
| skl_ddi_set_iboost(dev_priv, level, port, encoder->type); |
| else if (IS_BROXTON(dev_priv)) |
| bxt_ddi_vswing_sequence(dev_priv, level, port, encoder->type); |
| |
| return DDI_BUF_TRANS_SELECT(level); |
| } |
| |
| void intel_ddi_clk_select(struct intel_encoder *encoder, |
| const struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| enum port port = intel_ddi_get_encoder_port(encoder); |
| |
| if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { |
| uint32_t dpll = pipe_config->ddi_pll_sel; |
| uint32_t val; |
| |
| /* DDI -> PLL mapping */ |
| val = I915_READ(DPLL_CTRL2); |
| |
| val &= ~(DPLL_CTRL2_DDI_CLK_OFF(port) | |
| DPLL_CTRL2_DDI_CLK_SEL_MASK(port)); |
| val |= (DPLL_CTRL2_DDI_CLK_SEL(dpll, port) | |
| DPLL_CTRL2_DDI_SEL_OVERRIDE(port)); |
| |
| I915_WRITE(DPLL_CTRL2, val); |
| |
| } else if (INTEL_INFO(dev_priv)->gen < 9) { |
| WARN_ON(pipe_config->ddi_pll_sel == PORT_CLK_SEL_NONE); |
| I915_WRITE(PORT_CLK_SEL(port), pipe_config->ddi_pll_sel); |
| } |
| } |
| |
| static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder) |
| { |
| struct drm_encoder *encoder = &intel_encoder->base; |
| struct drm_i915_private *dev_priv = to_i915(encoder->dev); |
| struct intel_crtc *crtc = to_intel_crtc(encoder->crtc); |
| enum port port = intel_ddi_get_encoder_port(intel_encoder); |
| int type = intel_encoder->type; |
| |
| intel_prepare_ddi_buffer(intel_encoder); |
| |
| if (type == INTEL_OUTPUT_EDP) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| intel_edp_panel_on(intel_dp); |
| } |
| |
| intel_ddi_clk_select(intel_encoder, crtc->config); |
| |
| if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| intel_dp_set_link_params(intel_dp, crtc->config); |
| |
| intel_ddi_init_dp_buf_reg(intel_encoder); |
| |
| intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); |
| intel_dp_start_link_train(intel_dp); |
| if (port != PORT_A || INTEL_INFO(dev_priv)->gen >= 9) |
| intel_dp_stop_link_train(intel_dp); |
| } else if (type == INTEL_OUTPUT_HDMI) { |
| struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); |
| |
| intel_hdmi->set_infoframes(encoder, |
| crtc->config->has_hdmi_sink, |
| &crtc->config->base.adjusted_mode); |
| } |
| } |
| |
| static void intel_ddi_post_disable(struct intel_encoder *intel_encoder) |
| { |
| struct drm_encoder *encoder = &intel_encoder->base; |
| struct drm_device *dev = encoder->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum port port = intel_ddi_get_encoder_port(intel_encoder); |
| int type = intel_encoder->type; |
| uint32_t val; |
| bool wait = false; |
| |
| val = I915_READ(DDI_BUF_CTL(port)); |
| if (val & DDI_BUF_CTL_ENABLE) { |
| val &= ~DDI_BUF_CTL_ENABLE; |
| I915_WRITE(DDI_BUF_CTL(port), val); |
| wait = true; |
| } |
| |
| val = I915_READ(DP_TP_CTL(port)); |
| val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); |
| val |= DP_TP_CTL_LINK_TRAIN_PAT1; |
| I915_WRITE(DP_TP_CTL(port), val); |
| |
| if (wait) |
| intel_wait_ddi_buf_idle(dev_priv, port); |
| |
| if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); |
| intel_edp_panel_vdd_on(intel_dp); |
| intel_edp_panel_off(intel_dp); |
| } |
| |
| if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) |
| I915_WRITE(DPLL_CTRL2, (I915_READ(DPLL_CTRL2) | |
| DPLL_CTRL2_DDI_CLK_OFF(port))); |
| else if (INTEL_INFO(dev)->gen < 9) |
| I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE); |
| } |
| |
| static void intel_enable_ddi(struct intel_encoder *intel_encoder) |
| { |
| struct drm_encoder *encoder = &intel_encoder->base; |
| struct drm_crtc *crtc = encoder->crtc; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| struct drm_device *dev = encoder->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| enum port port = intel_ddi_get_encoder_port(intel_encoder); |
| int type = intel_encoder->type; |
| |
| if (type == INTEL_OUTPUT_HDMI) { |
| struct intel_digital_port *intel_dig_port = |
| enc_to_dig_port(encoder); |
| |
| /* In HDMI/DVI mode, the port width, and swing/emphasis values |
| * are ignored so nothing special needs to be done besides |
| * enabling the port. |
| */ |
| I915_WRITE(DDI_BUF_CTL(port), |
| intel_dig_port->saved_port_bits | |
| DDI_BUF_CTL_ENABLE); |
| } else if (type == INTEL_OUTPUT_EDP) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| if (port == PORT_A && INTEL_INFO(dev)->gen < 9) |
| intel_dp_stop_link_train(intel_dp); |
| |
| intel_edp_backlight_on(intel_dp); |
| intel_psr_enable(intel_dp); |
| intel_edp_drrs_enable(intel_dp); |
| } |
| |
| if (intel_crtc->config->has_audio) { |
| intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO); |
| intel_audio_codec_enable(intel_encoder); |
| } |
| } |
| |
| static void intel_disable_ddi(struct intel_encoder *intel_encoder) |
| { |
| struct drm_encoder *encoder = &intel_encoder->base; |
| struct drm_crtc *crtc = encoder->crtc; |
| struct intel_crtc *intel_crtc = to_intel_crtc(crtc); |
| int type = intel_encoder->type; |
| struct drm_device *dev = encoder->dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| if (intel_crtc->config->has_audio) { |
| intel_audio_codec_disable(intel_encoder); |
| intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO); |
| } |
| |
| if (type == INTEL_OUTPUT_EDP) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| intel_edp_drrs_disable(intel_dp); |
| intel_psr_disable(intel_dp); |
| intel_edp_backlight_off(intel_dp); |
| } |
| } |
| |
| static bool broxton_phy_is_enabled(struct drm_i915_private *dev_priv, |
| enum dpio_phy phy) |
| { |
| if (!(I915_READ(BXT_P_CR_GT_DISP_PWRON) & GT_DISPLAY_POWER_ON(phy))) |
| return false; |
| |
| if ((I915_READ(BXT_PORT_CL1CM_DW0(phy)) & |
| (PHY_POWER_GOOD | PHY_RESERVED)) != PHY_POWER_GOOD) { |
| DRM_DEBUG_DRIVER("DDI PHY %d powered, but power hasn't settled\n", |
| phy); |
| |
| return false; |
| } |
| |
| if (phy == DPIO_PHY1 && |
| !(I915_READ(BXT_PORT_REF_DW3(DPIO_PHY1)) & GRC_DONE)) { |
| DRM_DEBUG_DRIVER("DDI PHY 1 powered, but GRC isn't done\n"); |
| |
| return false; |
| } |
| |
| if (!(I915_READ(BXT_PHY_CTL_FAMILY(phy)) & COMMON_RESET_DIS)) { |
| DRM_DEBUG_DRIVER("DDI PHY %d powered, but still in reset\n", |
| phy); |
| |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static u32 broxton_get_grc(struct drm_i915_private *dev_priv, enum dpio_phy phy) |
| { |
| u32 val = I915_READ(BXT_PORT_REF_DW6(phy)); |
| |
| return (val & GRC_CODE_MASK) >> GRC_CODE_SHIFT; |
| } |
| |
| static void broxton_phy_init(struct drm_i915_private *dev_priv, |
| enum dpio_phy phy) |
| { |
| enum port port; |
| u32 ports, val; |
| |
| if (broxton_phy_is_enabled(dev_priv, phy)) { |
| DRM_DEBUG_DRIVER("DDI PHY %d already enabled, " |
| "won't reprogram it\n", phy); |
| /* Still read out the GRC value for state verification */ |
| if (phy == DPIO_PHY1) |
| dev_priv->bxt_phy_grc = broxton_get_grc(dev_priv, phy); |
| |
| return; |
| } |
| |
| DRM_DEBUG_DRIVER("DDI PHY %d not enabled, enabling it\n", phy); |
| |
| val = I915_READ(BXT_P_CR_GT_DISP_PWRON); |
| val |= GT_DISPLAY_POWER_ON(phy); |
| I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val); |
| |
| /* |
| * The PHY registers start out inaccessible and respond to reads with |
| * all 1s. Eventually they become accessible as they power up, then |
| * the reserved bit will give the default 0. Poll on the reserved bit |
| * becoming 0 to find when the PHY is accessible. |
| * HW team confirmed that the time to reach phypowergood status is |
| * anywhere between 50 us and 100us. |
| */ |
| if (wait_for_us(((I915_READ(BXT_PORT_CL1CM_DW0(phy)) & |
| (PHY_RESERVED | PHY_POWER_GOOD)) == PHY_POWER_GOOD), 100)) { |
| DRM_ERROR("timeout during PHY%d power on\n", phy); |
| } |
| |
| if (phy == DPIO_PHY0) |
| ports = BIT(PORT_B) | BIT(PORT_C); |
| else |
| ports = BIT(PORT_A); |
| |
| for_each_port_masked(port, ports) { |
| int lane; |
| |
| for (lane = 0; lane < 4; lane++) { |
| val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane)); |
| /* |
| * Note that on CHV this flag is called UPAR, but has |
| * the same function. |
| */ |
| val &= ~LATENCY_OPTIM; |
| if (lane != 1) |
| val |= LATENCY_OPTIM; |
| |
| I915_WRITE(BXT_PORT_TX_DW14_LN(port, lane), val); |
| } |
| } |
| |
| /* Program PLL Rcomp code offset */ |
| val = I915_READ(BXT_PORT_CL1CM_DW9(phy)); |
| val &= ~IREF0RC_OFFSET_MASK; |
| val |= 0xE4 << IREF0RC_OFFSET_SHIFT; |
| I915_WRITE(BXT_PORT_CL1CM_DW9(phy), val); |
| |
| val = I915_READ(BXT_PORT_CL1CM_DW10(phy)); |
| val &= ~IREF1RC_OFFSET_MASK; |
| val |= 0xE4 << IREF1RC_OFFSET_SHIFT; |
| I915_WRITE(BXT_PORT_CL1CM_DW10(phy), val); |
| |
| /* Program power gating */ |
| val = I915_READ(BXT_PORT_CL1CM_DW28(phy)); |
| val |= OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN | |
| SUS_CLK_CONFIG; |
| I915_WRITE(BXT_PORT_CL1CM_DW28(phy), val); |
| |
| if (phy == DPIO_PHY0) { |
| val = I915_READ(BXT_PORT_CL2CM_DW6_BC); |
| val |= DW6_OLDO_DYN_PWR_DOWN_EN; |
| I915_WRITE(BXT_PORT_CL2CM_DW6_BC, val); |
| } |
| |
| val = I915_READ(BXT_PORT_CL1CM_DW30(phy)); |
| val &= ~OCL2_LDOFUSE_PWR_DIS; |
| /* |
| * On PHY1 disable power on the second channel, since no port is |
| * connected there. On PHY0 both channels have a port, so leave it |
| * enabled. |
| * TODO: port C is only connected on BXT-P, so on BXT0/1 we should |
| * power down the second channel on PHY0 as well. |
| * |
| * FIXME: Clarify programming of the following, the register is |
| * read-only with bit 6 fixed at 0 at least in stepping A. |
| */ |
| if (phy == DPIO_PHY1) |
| val |= OCL2_LDOFUSE_PWR_DIS; |
| I915_WRITE(BXT_PORT_CL1CM_DW30(phy), val); |
| |
| if (phy == DPIO_PHY0) { |
| uint32_t grc_code; |
| /* |
| * PHY0 isn't connected to an RCOMP resistor so copy over |
| * the corresponding calibrated value from PHY1, and disable |
| * the automatic calibration on PHY0. |
| */ |
| if (wait_for(I915_READ(BXT_PORT_REF_DW3(DPIO_PHY1)) & GRC_DONE, |
| 10)) |
| DRM_ERROR("timeout waiting for PHY1 GRC\n"); |
| |
| val = dev_priv->bxt_phy_grc = broxton_get_grc(dev_priv, |
| DPIO_PHY1); |
| grc_code = val << GRC_CODE_FAST_SHIFT | |
| val << GRC_CODE_SLOW_SHIFT | |
| val; |
| I915_WRITE(BXT_PORT_REF_DW6(DPIO_PHY0), grc_code); |
| |
| val = I915_READ(BXT_PORT_REF_DW8(DPIO_PHY0)); |
| val |= GRC_DIS | GRC_RDY_OVRD; |
| I915_WRITE(BXT_PORT_REF_DW8(DPIO_PHY0), val); |
| } |
| |
| val = I915_READ(BXT_PHY_CTL_FAMILY(phy)); |
| val |= COMMON_RESET_DIS; |
| I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val); |
| } |
| |
| void broxton_ddi_phy_init(struct drm_i915_private *dev_priv) |
| { |
| /* Enable PHY1 first since it provides Rcomp for PHY0 */ |
| broxton_phy_init(dev_priv, DPIO_PHY1); |
| broxton_phy_init(dev_priv, DPIO_PHY0); |
| } |
| |
| static void broxton_phy_uninit(struct drm_i915_private *dev_priv, |
| enum dpio_phy phy) |
| { |
| uint32_t val; |
| |
| val = I915_READ(BXT_PHY_CTL_FAMILY(phy)); |
| val &= ~COMMON_RESET_DIS; |
| I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val); |
| |
| val = I915_READ(BXT_P_CR_GT_DISP_PWRON); |
| val &= ~GT_DISPLAY_POWER_ON(phy); |
| I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val); |
| } |
| |
| void broxton_ddi_phy_uninit(struct drm_i915_private *dev_priv) |
| { |
| broxton_phy_uninit(dev_priv, DPIO_PHY1); |
| broxton_phy_uninit(dev_priv, DPIO_PHY0); |
| } |
| |
| static bool __printf(6, 7) |
| __phy_reg_verify_state(struct drm_i915_private *dev_priv, enum dpio_phy phy, |
| i915_reg_t reg, u32 mask, u32 expected, |
| const char *reg_fmt, ...) |
| { |
| struct va_format vaf; |
| va_list args; |
| u32 val; |
| |
| val = I915_READ(reg); |
| if ((val & mask) == expected) |
| return true; |
| |
| va_start(args, reg_fmt); |
| vaf.fmt = reg_fmt; |
| vaf.va = &args; |
| |
| DRM_DEBUG_DRIVER("DDI PHY %d reg %pV [%08x] state mismatch: " |
| "current %08x, expected %08x (mask %08x)\n", |
| phy, &vaf, reg.reg, val, (val & ~mask) | expected, |
| mask); |
| |
| va_end(args); |
| |
| return false; |
| } |
| |
| static bool broxton_phy_verify_state(struct drm_i915_private *dev_priv, |
| enum dpio_phy phy) |
| { |
| enum port port; |
| u32 ports; |
| uint32_t mask; |
| bool ok; |
| |
| #define _CHK(reg, mask, exp, fmt, ...) \ |
| __phy_reg_verify_state(dev_priv, phy, reg, mask, exp, fmt, \ |
| ## __VA_ARGS__) |
| |
| /* We expect the PHY to be always enabled */ |
| if (!broxton_phy_is_enabled(dev_priv, phy)) |
| return false; |
| |
| ok = true; |
| |
| if (phy == DPIO_PHY0) |
| ports = BIT(PORT_B) | BIT(PORT_C); |
| else |
| ports = BIT(PORT_A); |
| |
| for_each_port_masked(port, ports) { |
| int lane; |
| |
| for (lane = 0; lane < 4; lane++) |
| ok &= _CHK(BXT_PORT_TX_DW14_LN(port, lane), |
| LATENCY_OPTIM, |
| lane != 1 ? LATENCY_OPTIM : 0, |
| "BXT_PORT_TX_DW14_LN(%d, %d)", port, lane); |
| } |
| |
| /* PLL Rcomp code offset */ |
| ok &= _CHK(BXT_PORT_CL1CM_DW9(phy), |
| IREF0RC_OFFSET_MASK, 0xe4 << IREF0RC_OFFSET_SHIFT, |
| "BXT_PORT_CL1CM_DW9(%d)", phy); |
| ok &= _CHK(BXT_PORT_CL1CM_DW10(phy), |
| IREF1RC_OFFSET_MASK, 0xe4 << IREF1RC_OFFSET_SHIFT, |
| "BXT_PORT_CL1CM_DW10(%d)", phy); |
| |
| /* Power gating */ |
| mask = OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN | SUS_CLK_CONFIG; |
| ok &= _CHK(BXT_PORT_CL1CM_DW28(phy), mask, mask, |
| "BXT_PORT_CL1CM_DW28(%d)", phy); |
| |
| if (phy == DPIO_PHY0) |
| ok &= _CHK(BXT_PORT_CL2CM_DW6_BC, |
| DW6_OLDO_DYN_PWR_DOWN_EN, DW6_OLDO_DYN_PWR_DOWN_EN, |
| "BXT_PORT_CL2CM_DW6_BC"); |
| |
| /* |
| * TODO: Verify BXT_PORT_CL1CM_DW30 bit OCL2_LDOFUSE_PWR_DIS, |
| * at least on stepping A this bit is read-only and fixed at 0. |
| */ |
| |
| if (phy == DPIO_PHY0) { |
| u32 grc_code = dev_priv->bxt_phy_grc; |
| |
| grc_code = grc_code << GRC_CODE_FAST_SHIFT | |
| grc_code << GRC_CODE_SLOW_SHIFT | |
| grc_code; |
| mask = GRC_CODE_FAST_MASK | GRC_CODE_SLOW_MASK | |
| GRC_CODE_NOM_MASK; |
| ok &= _CHK(BXT_PORT_REF_DW6(DPIO_PHY0), mask, grc_code, |
| "BXT_PORT_REF_DW6(%d)", DPIO_PHY0); |
| |
| mask = GRC_DIS | GRC_RDY_OVRD; |
| ok &= _CHK(BXT_PORT_REF_DW8(DPIO_PHY0), mask, mask, |
| "BXT_PORT_REF_DW8(%d)", DPIO_PHY0); |
| } |
| |
| return ok; |
| #undef _CHK |
| } |
| |
| void broxton_ddi_phy_verify_state(struct drm_i915_private *dev_priv) |
| { |
| if (!broxton_phy_verify_state(dev_priv, DPIO_PHY0) || |
| !broxton_phy_verify_state(dev_priv, DPIO_PHY1)) |
| i915_report_error(dev_priv, "DDI PHY state mismatch\n"); |
| } |
| |
| void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct drm_i915_private *dev_priv = |
| to_i915(intel_dig_port->base.base.dev); |
| enum port port = intel_dig_port->port; |
| uint32_t val; |
| bool wait = false; |
| |
| if (I915_READ(DP_TP_CTL(port)) & DP_TP_CTL_ENABLE) { |
| val = I915_READ(DDI_BUF_CTL(port)); |
| if (val & DDI_BUF_CTL_ENABLE) { |
| val &= ~DDI_BUF_CTL_ENABLE; |
| I915_WRITE(DDI_BUF_CTL(port), val); |
| wait = true; |
| } |
| |
| val = I915_READ(DP_TP_CTL(port)); |
| val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); |
| val |= DP_TP_CTL_LINK_TRAIN_PAT1; |
| I915_WRITE(DP_TP_CTL(port), val); |
| POSTING_READ(DP_TP_CTL(port)); |
| |
| if (wait) |
| intel_wait_ddi_buf_idle(dev_priv, port); |
| } |
| |
| val = DP_TP_CTL_ENABLE | |
| DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_SCRAMBLE_DISABLE; |
| if (intel_dp->is_mst) |
| val |= DP_TP_CTL_MODE_MST; |
| else { |
| val |= DP_TP_CTL_MODE_SST; |
| if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) |
| val |= DP_TP_CTL_ENHANCED_FRAME_ENABLE; |
| } |
| I915_WRITE(DP_TP_CTL(port), val); |
| POSTING_READ(DP_TP_CTL(port)); |
| |
| intel_dp->DP |= DDI_BUF_CTL_ENABLE; |
| I915_WRITE(DDI_BUF_CTL(port), intel_dp->DP); |
| POSTING_READ(DDI_BUF_CTL(port)); |
| |
| udelay(600); |
| } |
| |
| void intel_ddi_fdi_disable(struct drm_crtc *crtc) |
| { |
| struct drm_i915_private *dev_priv = crtc->dev->dev_private; |
| struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); |
| uint32_t val; |
| |
| /* |
| * Bspec lists this as both step 13 (before DDI_BUF_CTL disable) |
| * and step 18 (after clearing PORT_CLK_SEL). Based on a BUN, |
| * step 13 is the correct place for it. Step 18 is where it was |
| * originally before the BUN. |
| */ |
| val = I915_READ(FDI_RX_CTL(PIPE_A)); |
| val &= ~FDI_RX_ENABLE; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), val); |
| |
| intel_ddi_post_disable(intel_encoder); |
| |
| val = I915_READ(FDI_RX_MISC(PIPE_A)); |
| val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); |
| val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); |
| I915_WRITE(FDI_RX_MISC(PIPE_A), val); |
| |
| val = I915_READ(FDI_RX_CTL(PIPE_A)); |
| val &= ~FDI_PCDCLK; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), val); |
| |
| val = I915_READ(FDI_RX_CTL(PIPE_A)); |
| val &= ~FDI_RX_PLL_ENABLE; |
| I915_WRITE(FDI_RX_CTL(PIPE_A), val); |
| } |
| |
| bool intel_ddi_is_audio_enabled(struct drm_i915_private *dev_priv, |
| struct intel_crtc *intel_crtc) |
| { |
| u32 temp; |
| |
| if (intel_display_power_get_if_enabled(dev_priv, POWER_DOMAIN_AUDIO)) { |
| temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); |
| |
| intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO); |
| |
| if (temp & AUDIO_OUTPUT_ENABLE(intel_crtc->pipe)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| void intel_ddi_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); |
| enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; |
| struct intel_hdmi *intel_hdmi; |
| u32 temp, flags = 0; |
| |
| /* XXX: DSI transcoder paranoia */ |
| if (WARN_ON(transcoder_is_dsi(cpu_transcoder))) |
| return; |
| |
| temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); |
| if (temp & TRANS_DDI_PHSYNC) |
| flags |= DRM_MODE_FLAG_PHSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NHSYNC; |
| if (temp & TRANS_DDI_PVSYNC) |
| flags |= DRM_MODE_FLAG_PVSYNC; |
| else |
| flags |= DRM_MODE_FLAG_NVSYNC; |
| |
| pipe_config->base.adjusted_mode.flags |= flags; |
| |
| switch (temp & TRANS_DDI_BPC_MASK) { |
| case TRANS_DDI_BPC_6: |
| pipe_config->pipe_bpp = 18; |
| break; |
| case TRANS_DDI_BPC_8: |
| pipe_config->pipe_bpp = 24; |
| break; |
| case TRANS_DDI_BPC_10: |
| pipe_config->pipe_bpp = 30; |
| break; |
| case TRANS_DDI_BPC_12: |
| pipe_config->pipe_bpp = 36; |
| break; |
| default: |
| break; |
| } |
| |
| switch (temp & TRANS_DDI_MODE_SELECT_MASK) { |
| case TRANS_DDI_MODE_SELECT_HDMI: |
| pipe_config->has_hdmi_sink = true; |
| intel_hdmi = enc_to_intel_hdmi(&encoder->base); |
| |
| if (intel_hdmi->infoframe_enabled(&encoder->base, pipe_config)) |
| pipe_config->has_infoframe = true; |
| break; |
| case TRANS_DDI_MODE_SELECT_DVI: |
| case TRANS_DDI_MODE_SELECT_FDI: |
| break; |
| case TRANS_DDI_MODE_SELECT_DP_SST: |
| case TRANS_DDI_MODE_SELECT_DP_MST: |
| pipe_config->has_dp_encoder = true; |
| pipe_config->lane_count = |
| ((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1; |
| intel_dp_get_m_n(intel_crtc, pipe_config); |
| break; |
| default: |
| break; |
| } |
| |
| pipe_config->has_audio = |
| intel_ddi_is_audio_enabled(dev_priv, intel_crtc); |
| |
| if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp && |
| pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) { |
| /* |
| * This is a big fat ugly hack. |
| * |
| * Some machines in UEFI boot mode provide us a VBT that has 18 |
| * bpp and 1.62 GHz link bandwidth for eDP, which for reasons |
| * unknown we fail to light up. Yet the same BIOS boots up with |
| * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as |
| * max, not what it tells us to use. |
| * |
| * Note: This will still be broken if the eDP panel is not lit |
| * up by the BIOS, and thus we can't get the mode at module |
| * load. |
| */ |
| DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", |
| pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp); |
| dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; |
| } |
| |
| intel_ddi_clock_get(encoder, pipe_config); |
| } |
| |
| static void intel_ddi_destroy(struct drm_encoder *encoder) |
| { |
| /* HDMI has nothing special to destroy, so we can go with this. */ |
| intel_dp_encoder_destroy(encoder); |
| } |
| |
| static bool intel_ddi_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| int type = encoder->type; |
| int port = intel_ddi_get_encoder_port(encoder); |
| |
| WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n"); |
| |
| if (port == PORT_A) |
| pipe_config->cpu_transcoder = TRANSCODER_EDP; |
| |
| if (type == INTEL_OUTPUT_HDMI) |
| return intel_hdmi_compute_config(encoder, pipe_config); |
| else |
| return intel_dp_compute_config(encoder, pipe_config); |
| } |
| |
| static const struct drm_encoder_funcs intel_ddi_funcs = { |
| .destroy = intel_ddi_destroy, |
| }; |
| |
| static struct intel_connector * |
| intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port) |
| { |
| struct intel_connector *connector; |
| enum port port = intel_dig_port->port; |
| |
| connector = intel_connector_alloc(); |
| if (!connector) |
| return NULL; |
| |
| intel_dig_port->dp.output_reg = DDI_BUF_CTL(port); |
| if (!intel_dp_init_connector(intel_dig_port, connector)) { |
| kfree(connector); |
| return NULL; |
| } |
| |
| return connector; |
| } |
| |
| static struct intel_connector * |
| intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port) |
| { |
| struct intel_connector *connector; |
| enum port port = intel_dig_port->port; |
| |
| connector = intel_connector_alloc(); |
| if (!connector) |
| return NULL; |
| |
| intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port); |
| intel_hdmi_init_connector(intel_dig_port, connector); |
| |
| return connector; |
| } |
| |
| void intel_ddi_init(struct drm_device *dev, enum port port) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_digital_port *intel_dig_port; |
| struct intel_encoder *intel_encoder; |
| struct drm_encoder *encoder; |
| bool init_hdmi, init_dp; |
| int max_lanes; |
| |
| if (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES) { |
| switch (port) { |
| case PORT_A: |
| max_lanes = 4; |
| break; |
| case PORT_E: |
| max_lanes = 0; |
| break; |
| default: |
| max_lanes = 4; |
| break; |
| } |
| } else { |
| switch (port) { |
| case PORT_A: |
| max_lanes = 2; |
| break; |
| case PORT_E: |
| max_lanes = 2; |
| break; |
| default: |
| max_lanes = 4; |
| break; |
| } |
| } |
| |
| init_hdmi = (dev_priv->vbt.ddi_port_info[port].supports_dvi || |
| dev_priv->vbt.ddi_port_info[port].supports_hdmi); |
| init_dp = dev_priv->vbt.ddi_port_info[port].supports_dp; |
| if (!init_dp && !init_hdmi) { |
| DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible, respect it\n", |
| port_name(port)); |
| return; |
| } |
| |
| intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL); |
| if (!intel_dig_port) |
| return; |
| |
| intel_encoder = &intel_dig_port->base; |
| encoder = &intel_encoder->base; |
| |
| drm_encoder_init(dev, encoder, &intel_ddi_funcs, |
| DRM_MODE_ENCODER_TMDS, NULL); |
| |
| intel_encoder->compute_config = intel_ddi_compute_config; |
| intel_encoder->enable = intel_enable_ddi; |
| intel_encoder->pre_enable = intel_ddi_pre_enable; |
| intel_encoder->disable = intel_disable_ddi; |
| intel_encoder->post_disable = intel_ddi_post_disable; |
| intel_encoder->get_hw_state = intel_ddi_get_hw_state; |
| intel_encoder->get_config = intel_ddi_get_config; |
| |
| intel_dig_port->port = port; |
| intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) & |
| (DDI_BUF_PORT_REVERSAL | |
| DDI_A_4_LANES); |
| |
| /* |
| * Bspec says that DDI_A_4_LANES is the only supported configuration |
| * for Broxton. Yet some BIOS fail to set this bit on port A if eDP |
| * wasn't lit up at boot. Force this bit on in our internal |
| * configuration so that we use the proper lane count for our |
| * calculations. |
| */ |
| if (IS_BROXTON(dev) && port == PORT_A) { |
| if (!(intel_dig_port->saved_port_bits & DDI_A_4_LANES)) { |
| DRM_DEBUG_KMS("BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing\n"); |
| intel_dig_port->saved_port_bits |= DDI_A_4_LANES; |
| max_lanes = 4; |
| } |
| } |
| |
| intel_dig_port->max_lanes = max_lanes; |
| |
| intel_encoder->type = INTEL_OUTPUT_UNKNOWN; |
| intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); |
| intel_encoder->cloneable = 0; |
| |
| if (init_dp) { |
| if (!intel_ddi_init_dp_connector(intel_dig_port)) |
| goto err; |
| |
| intel_dig_port->hpd_pulse = intel_dp_hpd_pulse; |
| /* |
| * On BXT A0/A1, sw needs to activate DDIA HPD logic and |
| * interrupts to check the external panel connection. |
| */ |
| if (IS_BXT_REVID(dev, 0, BXT_REVID_A1) && port == PORT_B) |
| dev_priv->hotplug.irq_port[PORT_A] = intel_dig_port; |
| else |
| dev_priv->hotplug.irq_port[port] = intel_dig_port; |
| } |
| |
| /* In theory we don't need the encoder->type check, but leave it just in |
| * case we have some really bad VBTs... */ |
| if (intel_encoder->type != INTEL_OUTPUT_EDP && init_hdmi) { |
| if (!intel_ddi_init_hdmi_connector(intel_dig_port)) |
| goto err; |
| } |
| |
| return; |
| |
| err: |
| drm_encoder_cleanup(encoder); |
| kfree(intel_dig_port); |
| } |