blob: 87b8c7439af028138e87a0ec0eef75156aaccb2c [file] [log] [blame]
/*
* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&blsp1_uart0 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&uart_console_active>;
};
&sdhc_1 {
/* device core power supply */
vdd-supply = <&pm8953_l8>;
qcom,vdd-voltage-level = <2900000 2900000>;
qcom,vdd-current-level = <200 570000>;
/* device communication power supply */
vdd-io-supply = <&pm8953_l5>;
qcom,vdd-io-always-on;
qcom,vdd-io-lpm-sup;
qcom,vdd-io-voltage-level = <1800000 1800000>;
qcom,vdd-io-current-level = <200 325000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000
384000000>;
qcom,nonremovable;
qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";
status = "ok";
};
&sdhc_2 {
/* device core power supply */
vdd-supply = <&pm8953_l11>;
qcom,vdd-voltage-level = <2950000 2950000>;
qcom,vdd-current-level = <15000 800000>;
/* device communication power supply */
vdd-io-supply = <&pm8953_l12>;
qcom,vdd-io-voltage-level = <1800000 2950000>;
qcom,vdd-io-current-level = <200 22000>;
pinctrl-names = "active", "sleep";
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
#address-cells = <0>;
interrupt-parent = <&sdhc_2>;
interrupts = <0 1 2>;
#interrupt-cells = <1>;
interrupt-map-mask = <0xffffffff>;
interrupt-map = <0 &intc 0 125 0
1 &intc 0 221 0
2 &tlmm 133 0>;
interrupt-names = "hc_irq", "pwr_irq", "status_irq";
cd-gpios = <&tlmm 133 0x1>;
qcom,clk-rates = <400000 20000000 25000000 50000000 100000000
200000000>;
qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
status = "ok";
};