arch/arm/mach-at91/pm_slowclock.S - kernel/msm-4.9 - Gitiles

 /*
  * arch/arm/mach-at91/pm_slow_clock.S
  *
  *  Copyright (C) 2006 Savin Zlobec
  *
  * AT91SAM9 support:
  *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  */

 #include <linux/linkage.h>
 #include <linux/clk/at91_pmc.h>
 #include <mach/hardware.h>
 #include <mach/at91_ramc.h>


 #ifdef CONFIG_SOC_AT91SAM9263
 /*
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
  */
 #warning Assuming EB1 SDRAM controller is *NOT* used
 #endif

 /*
  * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
  * clock during suspend by adjusting its prescalar and divisor.
  * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
  *       are errata regarding adjusting the prescalar and divisor.
  */
 #undef SLOWDOWN_MASTER_CLOCK

 #define MCKRDY_TIMEOUT		1000
 #define MOSCRDY_TIMEOUT 	1000
 #define PLLALOCK_TIMEOUT	1000
 #define PLLBLOCK_TIMEOUT	1000

 pmc	.req	r0
 sdramc	.req	r1
 ramc1	.req	r2
 memctrl	.req	r3
 tmp1	.req	r4
 tmp2	.req	r5

 /*
  * Wait until master clock is ready (after switching master clock source)
  */
 	.macro wait_mckrdy
 	mov	tmp2, #MCKRDY_TIMEOUT
 1:	sub	tmp2, tmp2, #1
 	cmp	tmp2, #0
 	beq	2f
 	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MCKRDY
 	beq	1b
 2:
 	.endm

 /*
  * Wait until master oscillator has stabilized.
  */
 	.macro wait_moscrdy
 	mov	tmp2, #MOSCRDY_TIMEOUT
 1:	sub	tmp2, tmp2, #1
 	cmp	tmp2, #0
 	beq	2f
 	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MOSCS
 	beq	1b
 2:
 	.endm

 /*
  * Wait until PLLA has locked.
  */
 	.macro wait_pllalock
 	mov	tmp2, #PLLALOCK_TIMEOUT
 1:	sub	tmp2, tmp2, #1
 	cmp	tmp2, #0
 	beq	2f
 	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKA
 	beq	1b
 2:
 	.endm

 /*
  * Wait until PLLB has locked.
  */
 	.macro wait_pllblock
 	mov	tmp2, #PLLBLOCK_TIMEOUT
 1:	sub	tmp2, tmp2, #1
 	cmp	tmp2, #0
 	beq	2f
 	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKB
 	beq	1b
 2:
 	.endm

 	.text

 /* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
  *			void __iomem *ramc1, int memctrl)
  */
 ENTRY(at91_slow_clock)
 	/* Save registers on stack */
 	stmfd	sp!, {r4 - r12, lr}

 	/*
 	 * Register usage:
 	 *  R0 = Base address of AT91_PMC
 	 *  R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
 	 *  R2 = Base address of second RAM Controller or 0 if not present
 	 *  R3 = Memory controller
 	 *  R4 = temporary register
 	 *  R5 = temporary register
 	 */

 	/* Drain write buffer */
 	mov	tmp1, #0
 	mcr	p15, 0, tmp1, c7, c10, 4

 	cmp	memctrl, #AT91_MEMCTRL_MC
 	bne	ddr_sr_enable

 	/*
 	 * at91rm9200 Memory controller
 	 */
 	/* Put SDRAM in self-refresh mode */
 	mov	tmp1, #1
 	str	tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
 	b	sdr_sr_done

 	/*
 	 * DDRSDR Memory controller
 	 */
 ddr_sr_enable:
 	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
 	bne	sdr_sr_enable

 	/* prepare for DDRAM self-refresh mode */
 	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
 	str	tmp1, .saved_sam9_lpr
 	bic	tmp1, #AT91_DDRSDRC_LPCB
 	orr	tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH

 	/* figure out if we use the second ram controller */
 	cmp	ramc1, #0
 	ldrne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
 	strne	tmp2, .saved_sam9_lpr1
 	bicne	tmp2, #AT91_DDRSDRC_LPCB
 	orrne	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH

 	/* Enable DDRAM self-refresh mode */
 	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
 	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]

 	b	sdr_sr_done

 	/*
 	 * SDRAMC Memory controller
 	 */
 sdr_sr_enable:
 	/* Enable SDRAM self-refresh mode */
 	ldr	tmp1, [sdramc, #AT91_SDRAMC_LPR]
 	str	tmp1, .saved_sam9_lpr

 	bic	tmp1, #AT91_SDRAMC_LPCB
 	orr	tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
 	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]

 sdr_sr_done:
 	/* Save Master clock setting */
 	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
 	str	tmp1, .saved_mckr

 	/*
 	 * Set the Master clock source to slow clock
 	 */
 	bic	tmp1, tmp1, #AT91_PMC_CSS
 	str	tmp1, [pmc, #AT91_PMC_MCKR]

 	wait_mckrdy

 #ifdef SLOWDOWN_MASTER_CLOCK
 	/*
 	 * Set the Master Clock PRES and MDIV fields.
 	 *
 	 * See AT91RM9200 errata #27 and #28 for details.
 	 */
 	mov	tmp1, #0
 	str	tmp1, [pmc, #AT91_PMC_MCKR]

 	wait_mckrdy
 #endif

 	/* Save PLLA setting and disable it */
 	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
 	str	tmp1, .saved_pllar

 	mov	tmp1, #AT91_PMC_PLLCOUNT
 	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]

 	/* Save PLLB setting and disable it */
 	ldr	tmp1, [pmc, #AT91_CKGR_PLLBR]
 	str	tmp1, .saved_pllbr

 	mov	tmp1, #AT91_PMC_PLLCOUNT
 	str	tmp1, [pmc, #AT91_CKGR_PLLBR]

 	/* Turn off the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
 	str	tmp1, [pmc, #AT91_CKGR_MOR]

 	/* Wait for interrupt */
 	mcr	p15, 0, tmp1, c7, c0, 4

 	/* Turn on the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
 	str	tmp1, [pmc, #AT91_CKGR_MOR]

 	wait_moscrdy

 	/* Restore PLLB setting */
 	ldr	tmp1, .saved_pllbr
 	str	tmp1, [pmc, #AT91_CKGR_PLLBR]

 	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
 	bne	1f
 	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
 	beq	2f
 1:
 	wait_pllblock
 2:

 	/* Restore PLLA setting */
 	ldr	tmp1, .saved_pllar
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]

 	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
 	bne	3f
 	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
 	beq	4f
 3:
 	wait_pllalock
 4:

 #ifdef SLOWDOWN_MASTER_CLOCK
 	/*
 	 * First set PRES if it was not 0,
 	 * than set CSS and MDIV fields.
 	 *
 	 * See AT91RM9200 errata #27 and #28 for details.
 	 */
 	ldr	tmp1, .saved_mckr
 	tst	tmp1, #AT91_PMC_PRES
 	beq	2f
 	and	tmp1, tmp1, #AT91_PMC_PRES
 	str	tmp1, [pmc, #AT91_PMC_MCKR]

 	wait_mckrdy
 #endif

 	/*
 	 * Restore master clock setting
 	 */
 2:	ldr	tmp1, .saved_mckr
 	str	tmp1, [pmc, #AT91_PMC_MCKR]

 	wait_mckrdy

 	/*
 	 * at91rm9200 Memory controller
 	 * Do nothing - self-refresh is automatically disabled.
 	 */
 	cmp	memctrl, #AT91_MEMCTRL_MC
 	beq	ram_restored

 	/*
 	 * DDRSDR Memory controller
 	 */
 	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
 	bne	sdr_en_restore
 	/* Restore LPR on AT91 with DDRAM */
 	ldr	tmp1, .saved_sam9_lpr
 	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]

 	/* if we use the second ram controller */
 	cmp	ramc1, #0
 	ldrne	tmp2, .saved_sam9_lpr1
 	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]

 	b	ram_restored

 	/*
 	 * SDRAMC Memory controller
 	 */
 sdr_en_restore:
 	/* Restore LPR on AT91 with SDRAM */
 	ldr	tmp1, .saved_sam9_lpr
 	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]

 ram_restored:
 	/* Restore registers, and return */
 	ldmfd	sp!, {r4 - r12, pc}


 .saved_mckr:
 	.word 0

 .saved_pllar:
 	.word 0

 .saved_pllbr:
 	.word 0

 .saved_sam9_lpr:
 	.word 0

 .saved_sam9_lpr1:
 	.word 0

 ENTRY(at91_slow_clock_sz)
 	.word .-at91_slow_clock
	/*
	* arch/arm/mach-at91/pm_slow_clock.S
	*
	* Copyright (C) 2006 Savin Zlobec
	*
	* AT91SAM9 support:
	* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	*/

	#include <linux/linkage.h>
	#include <linux/clk/at91_pmc.h>
	#include <mach/hardware.h>
	#include <mach/at91_ramc.h>


	#ifdef CONFIG_SOC_AT91SAM9263
	/*
	* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
	* handle those cases both here and in the Suspend-To-RAM support.
	*/
	#warning Assuming EB1 SDRAM controller is NOT used
	#endif

	/*
	* When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
	* clock during suspend by adjusting its prescalar and divisor.
	* NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
	* are errata regarding adjusting the prescalar and divisor.
	*/
	#undef SLOWDOWN_MASTER_CLOCK

	#define MCKRDY_TIMEOUT 1000
	#define MOSCRDY_TIMEOUT 1000
	#define PLLALOCK_TIMEOUT 1000
	#define PLLBLOCK_TIMEOUT 1000

	pmc .req r0
	sdramc .req r1
	ramc1 .req r2
	memctrl .req r3
	tmp1 .req r4
	tmp2 .req r5

	/*
	* Wait until master clock is ready (after switching master clock source)
	*/
	.macro wait_mckrdy
	mov tmp2, #MCKRDY_TIMEOUT
	1: sub tmp2, tmp2, #1
	cmp tmp2, #0
	beq 2f
	ldr tmp1, [pmc, #AT91_PMC_SR]
	tst tmp1, #AT91_PMC_MCKRDY
	beq 1b
	2:
	.endm

	/*
	* Wait until master oscillator has stabilized.
	*/
	.macro wait_moscrdy
	mov tmp2, #MOSCRDY_TIMEOUT
	1: sub tmp2, tmp2, #1
	cmp tmp2, #0
	beq 2f
	ldr tmp1, [pmc, #AT91_PMC_SR]
	tst tmp1, #AT91_PMC_MOSCS
	beq 1b
	2:
	.endm

	/*
	* Wait until PLLA has locked.
	*/
	.macro wait_pllalock
	mov tmp2, #PLLALOCK_TIMEOUT
	1: sub tmp2, tmp2, #1
	cmp tmp2, #0
	beq 2f
	ldr tmp1, [pmc, #AT91_PMC_SR]
	tst tmp1, #AT91_PMC_LOCKA
	beq 1b
	2:
	.endm

	/*
	* Wait until PLLB has locked.
	*/
	.macro wait_pllblock
	mov tmp2, #PLLBLOCK_TIMEOUT
	1: sub tmp2, tmp2, #1
	cmp tmp2, #0
	beq 2f
	ldr tmp1, [pmc, #AT91_PMC_SR]
	tst tmp1, #AT91_PMC_LOCKB
	beq 1b
	2:
	.endm

	.text

	/* void at91_slow_clock(void __iomem pmc, void __iomem sdramc,
	* void __iomem *ramc1, int memctrl)
	*/
	ENTRY(at91_slow_clock)
	/* Save registers on stack */
	stmfd sp!, {r4 - r12, lr}

	/*
	* Register usage:
	* R0 = Base address of AT91_PMC
	* R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
	* R2 = Base address of second RAM Controller or 0 if not present
	* R3 = Memory controller
	* R4 = temporary register
	* R5 = temporary register
	*/

	/* Drain write buffer */
	mov tmp1, #0
	mcr p15, 0, tmp1, c7, c10, 4

	cmp memctrl, #AT91_MEMCTRL_MC
	bne ddr_sr_enable

	/*
	* at91rm9200 Memory controller
	*/
	/* Put SDRAM in self-refresh mode */
	mov tmp1, #1
	str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
	b sdr_sr_done

	/*
	* DDRSDR Memory controller
	*/
	ddr_sr_enable:
	cmp memctrl, #AT91_MEMCTRL_DDRSDR
	bne sdr_sr_enable

	/* prepare for DDRAM self-refresh mode */
	ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
	str tmp1, .saved_sam9_lpr
	bic tmp1, #AT91_DDRSDRC_LPCB
	orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH

	/* figure out if we use the second ram controller */
	cmp ramc1, #0
	ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
	strne tmp2, .saved_sam9_lpr1
	bicne tmp2, #AT91_DDRSDRC_LPCB
	orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH

	/* Enable DDRAM self-refresh mode */
	str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
	strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]

	b sdr_sr_done

	/*
	* SDRAMC Memory controller
	*/
	sdr_sr_enable:
	/* Enable SDRAM self-refresh mode */
	ldr tmp1, [sdramc, #AT91_SDRAMC_LPR]
	str tmp1, .saved_sam9_lpr

	bic tmp1, #AT91_SDRAMC_LPCB
	orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
	str tmp1, [sdramc, #AT91_SDRAMC_LPR]

	sdr_sr_done:
	/* Save Master clock setting */
	ldr tmp1, [pmc, #AT91_PMC_MCKR]
	str tmp1, .saved_mckr

	/*
	* Set the Master clock source to slow clock
	*/
	bic tmp1, tmp1, #AT91_PMC_CSS
	str tmp1, [pmc, #AT91_PMC_MCKR]

	wait_mckrdy

	#ifdef SLOWDOWN_MASTER_CLOCK
	/*
	* Set the Master Clock PRES and MDIV fields.
	*
	* See AT91RM9200 errata #27 and #28 for details.
	*/
	mov tmp1, #0
	str tmp1, [pmc, #AT91_PMC_MCKR]

	wait_mckrdy
	#endif

	/* Save PLLA setting and disable it */
	ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
	str tmp1, .saved_pllar

	mov tmp1, #AT91_PMC_PLLCOUNT
	orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
	str tmp1, [pmc, #AT91_CKGR_PLLAR]

	/* Save PLLB setting and disable it */
	ldr tmp1, [pmc, #AT91_CKGR_PLLBR]
	str tmp1, .saved_pllbr

	mov tmp1, #AT91_PMC_PLLCOUNT
	str tmp1, [pmc, #AT91_CKGR_PLLBR]

	/* Turn off the main oscillator */
	ldr tmp1, [pmc, #AT91_CKGR_MOR]
	bic tmp1, tmp1, #AT91_PMC_MOSCEN
	str tmp1, [pmc, #AT91_CKGR_MOR]

	/* Wait for interrupt */
	mcr p15, 0, tmp1, c7, c0, 4

	/* Turn on the main oscillator */
	ldr tmp1, [pmc, #AT91_CKGR_MOR]
	orr tmp1, tmp1, #AT91_PMC_MOSCEN
	str tmp1, [pmc, #AT91_CKGR_MOR]

	wait_moscrdy

	/* Restore PLLB setting */
	ldr tmp1, .saved_pllbr
	str tmp1, [pmc, #AT91_CKGR_PLLBR]

	tst tmp1, #(AT91_PMC_MUL & 0xff0000)
	bne 1f
	tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
	beq 2f
	1:
	wait_pllblock
	2:

	/* Restore PLLA setting */
	ldr tmp1, .saved_pllar
	str tmp1, [pmc, #AT91_CKGR_PLLAR]

	tst tmp1, #(AT91_PMC_MUL & 0xff0000)
	bne 3f
	tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
	beq 4f
	3:
	wait_pllalock
	4:

	#ifdef SLOWDOWN_MASTER_CLOCK
	/*
	* First set PRES if it was not 0,
	* than set CSS and MDIV fields.
	*
	* See AT91RM9200 errata #27 and #28 for details.
	*/
	ldr tmp1, .saved_mckr
	tst tmp1, #AT91_PMC_PRES
	beq 2f
	and tmp1, tmp1, #AT91_PMC_PRES
	str tmp1, [pmc, #AT91_PMC_MCKR]

	wait_mckrdy
	#endif

	/*
	* Restore master clock setting
	*/
	2: ldr tmp1, .saved_mckr
	str tmp1, [pmc, #AT91_PMC_MCKR]

	wait_mckrdy

	/*
	* at91rm9200 Memory controller
	* Do nothing - self-refresh is automatically disabled.
	*/
	cmp memctrl, #AT91_MEMCTRL_MC
	beq ram_restored

	/*
	* DDRSDR Memory controller
	*/
	cmp memctrl, #AT91_MEMCTRL_DDRSDR
	bne sdr_en_restore
	/* Restore LPR on AT91 with DDRAM */
	ldr tmp1, .saved_sam9_lpr
	str tmp1, [sdramc, #AT91_DDRSDRC_LPR]

	/* if we use the second ram controller */
	cmp ramc1, #0
	ldrne tmp2, .saved_sam9_lpr1
	strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]

	b ram_restored

	/*
	* SDRAMC Memory controller
	*/
	sdr_en_restore:
	/* Restore LPR on AT91 with SDRAM */
	ldr tmp1, .saved_sam9_lpr
	str tmp1, [sdramc, #AT91_SDRAMC_LPR]

	ram_restored:
	/* Restore registers, and return */
	ldmfd sp!, {r4 - r12, pc}


	.saved_mckr:
	.word 0

	.saved_pllar:
	.word 0

	.saved_pllbr:
	.word 0

	.saved_sam9_lpr:
	.word 0

	.saved_sam9_lpr1:
	.word 0

	ENTRY(at91_slow_clock_sz)
	.word .-at91_slow_clock