blob: f10316b4ecdc7558b05644d3758532a26fa6de58 [file] [log] [blame]
/*
* arch/arm/kernel/topology.c
*
* Copyright (C) 2011 Linaro Limited.
* Written by: Vincent Guittot
*
* based on arch/sh/kernel/topology.c
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/node.h>
#include <linux/nodemask.h>
#include <linux/of.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <asm/cputype.h>
#include <asm/topology.h>
/*
* cpu power scale management
*/
/*
* cpu power table
* This per cpu data structure describes the relative capacity of each core.
* On a heteregenous system, cores don't have the same computation capacity
* and we reflect that difference in the cpu_power field so the scheduler can
* take this difference into account during load balance. A per cpu structure
* is preferred because each CPU updates its own cpu_power field during the
* load balance except for idle cores. One idle core is selected to run the
* rebalance_domains for all idle cores and the cpu_power can be updated
* during this sequence.
*/
static DEFINE_PER_CPU(unsigned long, cpu_scale);
unsigned long arch_scale_freq_power(struct sched_domain *sd, int cpu)
{
return per_cpu(cpu_scale, cpu);
}
static void set_power_scale(unsigned int cpu, unsigned long power)
{
per_cpu(cpu_scale, cpu) = power;
}
#ifdef CONFIG_OF
struct cpu_efficiency {
const char *compatible;
unsigned long efficiency;
};
/*
* Table of relative efficiency of each processors
* The efficiency value must fit in 20bit and the final
* cpu_scale value must be in the range
* 0 < cpu_scale < 3*SCHED_POWER_SCALE/2
* in order to return at most 1 when DIV_ROUND_CLOSEST
* is used to compute the capacity of a CPU.
* Processors that are not defined in the table,
* use the default SCHED_POWER_SCALE value for cpu_scale.
*/
struct cpu_efficiency table_efficiency[] = {
{"arm,cortex-a15", 3891},
{"arm,cortex-a7", 2048},
{NULL, },
};
struct cpu_capacity {
unsigned long hwid;
unsigned long capacity;
};
struct cpu_capacity *cpu_capacity;
unsigned long middle_capacity = 1;
/*
* Iterate all CPUs' descriptor in DT and compute the efficiency
* (as per table_efficiency). Also calculate a middle efficiency
* as close as possible to (max{eff_i} - min{eff_i}) / 2
* This is later used to scale the cpu_power field such that an
* 'average' CPU is of middle power. Also see the comments near
* table_efficiency[] and update_cpu_power().
*/
static void __init parse_dt_topology(void)
{
struct cpu_efficiency *cpu_eff;
struct device_node *cn = NULL;
unsigned long min_capacity = (unsigned long)(-1);
unsigned long max_capacity = 0;
unsigned long capacity = 0;
int alloc_size, cpu = 0;
alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity);
cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT);
while ((cn = of_find_node_by_type(cn, "cpu"))) {
const u32 *rate, *reg;
int len;
if (cpu >= num_possible_cpus())
break;
for (cpu_eff = table_efficiency; cpu_eff->compatible; cpu_eff++)
if (of_device_is_compatible(cn, cpu_eff->compatible))
break;
if (cpu_eff->compatible == NULL)
continue;
rate = of_get_property(cn, "clock-frequency", &len);
if (!rate || len != 4) {
pr_err("%s missing clock-frequency property\n",
cn->full_name);
continue;
}
reg = of_get_property(cn, "reg", &len);
if (!reg || len != 4) {
pr_err("%s missing reg property\n", cn->full_name);
continue;
}
capacity = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency;
/* Save min capacity of the system */
if (capacity < min_capacity)
min_capacity = capacity;
/* Save max capacity of the system */
if (capacity > max_capacity)
max_capacity = capacity;
cpu_capacity[cpu].capacity = capacity;
cpu_capacity[cpu++].hwid = be32_to_cpup(reg);
}
if (cpu < num_possible_cpus())
cpu_capacity[cpu].hwid = (unsigned long)(-1);
/* If min and max capacities are equals, we bypass the update of the
* cpu_scale because all CPUs have the same capacity. Otherwise, we
* compute a middle_capacity factor that will ensure that the capacity
* of an 'average' CPU of the system will be as close as possible to
* SCHED_POWER_SCALE, which is the default value, but with the
* constraint explained near table_efficiency[].
*/
if (min_capacity == max_capacity)
cpu_capacity[0].hwid = (unsigned long)(-1);
else if (4*max_capacity < (3*(max_capacity + min_capacity)))
middle_capacity = (min_capacity + max_capacity)
>> (SCHED_POWER_SHIFT+1);
else
middle_capacity = ((max_capacity / 3)
>> (SCHED_POWER_SHIFT-1)) + 1;
}
/*
* Look for a customed capacity of a CPU in the cpu_capacity table during the
* boot. The update of all CPUs is in O(n^2) for heteregeneous system but the
* function returns directly for SMP system.
*/
void update_cpu_power(unsigned int cpu, unsigned long hwid)
{
unsigned int idx = 0;
/* look for the cpu's hwid in the cpu capacity table */
for (idx = 0; idx < num_possible_cpus(); idx++) {
if (cpu_capacity[idx].hwid == hwid)
break;
if (cpu_capacity[idx].hwid == -1)
return;
}
if (idx == num_possible_cpus())
return;
set_power_scale(cpu, cpu_capacity[idx].capacity / middle_capacity);
printk(KERN_INFO "CPU%u: update cpu_power %lu\n",
cpu, arch_scale_freq_power(NULL, cpu));
}
#else
static inline void parse_dt_topology(void) {}
static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
#endif
/*
* cpu topology table
*/
struct cputopo_arm cpu_topology[NR_CPUS];
const struct cpumask *cpu_coregroup_mask(int cpu)
{
return &cpu_topology[cpu].core_sibling;
}
void update_siblings_masks(unsigned int cpuid)
{
struct cputopo_arm *cpu_topo, *cpuid_topo = &cpu_topology[cpuid];
int cpu;
/* update core and thread sibling masks */
for_each_possible_cpu(cpu) {
cpu_topo = &cpu_topology[cpu];
if (cpuid_topo->socket_id != cpu_topo->socket_id)
continue;
cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
if (cpu != cpuid)
cpumask_set_cpu(cpu, &cpuid_topo->core_sibling);
if (cpuid_topo->core_id != cpu_topo->core_id)
continue;
cpumask_set_cpu(cpuid, &cpu_topo->thread_sibling);
if (cpu != cpuid)
cpumask_set_cpu(cpu, &cpuid_topo->thread_sibling);
}
smp_wmb();
}
/*
* store_cpu_topology is called at boot when only one cpu is running
* and with the mutex cpu_hotplug.lock locked, when several cpus have booted,
* which prevents simultaneous write access to cpu_topology array
*/
void store_cpu_topology(unsigned int cpuid)
{
struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid];
unsigned int mpidr;
/* If the cpu topology has been already set, just return */
if (cpuid_topo->core_id != -1)
return;
mpidr = read_cpuid_mpidr();
/* create cpu topology mapping */
if ((mpidr & MPIDR_SMP_BITMASK) == MPIDR_SMP_VALUE) {
/*
* This is a multiprocessor system
* multiprocessor format & multiprocessor mode field are set
*/
if (mpidr & MPIDR_MT_BITMASK) {
/* core performance interdependency */
cpuid_topo->thread_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cpuid_topo->core_id = MPIDR_AFFINITY_LEVEL(mpidr, 1);
cpuid_topo->socket_id = MPIDR_AFFINITY_LEVEL(mpidr, 2);
} else {
/* largely independent cores */
cpuid_topo->thread_id = -1;
cpuid_topo->core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cpuid_topo->socket_id = MPIDR_AFFINITY_LEVEL(mpidr, 1);
}
} else {
/*
* This is an uniprocessor system
* we are in multiprocessor format but uniprocessor system
* or in the old uniprocessor format
*/
cpuid_topo->thread_id = -1;
cpuid_topo->core_id = 0;
cpuid_topo->socket_id = -1;
}
update_siblings_masks(cpuid);
update_cpu_power(cpuid, mpidr & MPIDR_HWID_BITMASK);
printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
cpuid, cpu_topology[cpuid].thread_id,
cpu_topology[cpuid].core_id,
cpu_topology[cpuid].socket_id, mpidr);
}
/*
* init_cpu_topology is called at boot when only one cpu is running
* which prevent simultaneous write access to cpu_topology array
*/
void __init init_cpu_topology(void)
{
unsigned int cpu;
/* init core mask and power*/
for_each_possible_cpu(cpu) {
struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]);
cpu_topo->thread_id = -1;
cpu_topo->core_id = -1;
cpu_topo->socket_id = -1;
cpumask_clear(&cpu_topo->core_sibling);
cpumask_clear(&cpu_topo->thread_sibling);
set_power_scale(cpu, SCHED_POWER_SCALE);
}
smp_wmb();
parse_dt_topology();
}