| /* |
| * core routines for the asynchronous memory transfer/transform api |
| * |
| * Copyright © 2006, Intel Corporation. |
| * |
| * Dan Williams <dan.j.williams@intel.com> |
| * |
| * with architecture considerations by: |
| * Neil Brown <neilb@suse.de> |
| * Jeff Garzik <jeff@garzik.org> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| */ |
| #include <linux/rculist.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/async_tx.h> |
| |
| #ifdef CONFIG_DMA_ENGINE |
| static int __init async_tx_init(void) |
| { |
| async_dmaengine_get(); |
| |
| printk(KERN_INFO "async_tx: api initialized (async)\n"); |
| |
| return 0; |
| } |
| |
| static void __exit async_tx_exit(void) |
| { |
| async_dmaengine_put(); |
| } |
| |
| module_init(async_tx_init); |
| module_exit(async_tx_exit); |
| |
| /** |
| * __async_tx_find_channel - find a channel to carry out the operation or let |
| * the transaction execute synchronously |
| * @submit: transaction dependency and submission modifiers |
| * @tx_type: transaction type |
| */ |
| struct dma_chan * |
| __async_tx_find_channel(struct async_submit_ctl *submit, |
| enum dma_transaction_type tx_type) |
| { |
| struct dma_async_tx_descriptor *depend_tx = submit->depend_tx; |
| |
| /* see if we can keep the chain on one channel */ |
| if (depend_tx && |
| dma_has_cap(tx_type, depend_tx->chan->device->cap_mask)) |
| return depend_tx->chan; |
| return async_dma_find_channel(tx_type); |
| } |
| EXPORT_SYMBOL_GPL(__async_tx_find_channel); |
| #endif |
| |
| |
| /** |
| * async_tx_channel_switch - queue an interrupt descriptor with a dependency |
| * pre-attached. |
| * @depend_tx: the operation that must finish before the new operation runs |
| * @tx: the new operation |
| */ |
| static void |
| async_tx_channel_switch(struct dma_async_tx_descriptor *depend_tx, |
| struct dma_async_tx_descriptor *tx) |
| { |
| struct dma_chan *chan = depend_tx->chan; |
| struct dma_device *device = chan->device; |
| struct dma_async_tx_descriptor *intr_tx = (void *) ~0; |
| |
| /* first check to see if we can still append to depend_tx */ |
| txd_lock(depend_tx); |
| if (txd_parent(depend_tx) && depend_tx->chan == tx->chan) { |
| txd_chain(depend_tx, tx); |
| intr_tx = NULL; |
| } |
| txd_unlock(depend_tx); |
| |
| /* attached dependency, flush the parent channel */ |
| if (!intr_tx) { |
| device->device_issue_pending(chan); |
| return; |
| } |
| |
| /* see if we can schedule an interrupt |
| * otherwise poll for completion |
| */ |
| if (dma_has_cap(DMA_INTERRUPT, device->cap_mask)) |
| intr_tx = device->device_prep_dma_interrupt(chan, 0); |
| else |
| intr_tx = NULL; |
| |
| if (intr_tx) { |
| intr_tx->callback = NULL; |
| intr_tx->callback_param = NULL; |
| /* safe to chain outside the lock since we know we are |
| * not submitted yet |
| */ |
| txd_chain(intr_tx, tx); |
| |
| /* check if we need to append */ |
| txd_lock(depend_tx); |
| if (txd_parent(depend_tx)) { |
| txd_chain(depend_tx, intr_tx); |
| async_tx_ack(intr_tx); |
| intr_tx = NULL; |
| } |
| txd_unlock(depend_tx); |
| |
| if (intr_tx) { |
| txd_clear_parent(intr_tx); |
| intr_tx->tx_submit(intr_tx); |
| async_tx_ack(intr_tx); |
| } |
| device->device_issue_pending(chan); |
| } else { |
| if (dma_wait_for_async_tx(depend_tx) != DMA_SUCCESS) |
| panic("%s: DMA error waiting for depend_tx\n", |
| __func__); |
| tx->tx_submit(tx); |
| } |
| } |
| |
| |
| /** |
| * submit_disposition - flags for routing an incoming operation |
| * @ASYNC_TX_SUBMITTED: we were able to append the new operation under the lock |
| * @ASYNC_TX_CHANNEL_SWITCH: when the lock is dropped schedule a channel switch |
| * @ASYNC_TX_DIRECT_SUBMIT: when the lock is dropped submit directly |
| * |
| * while holding depend_tx->lock we must avoid submitting new operations |
| * to prevent a circular locking dependency with drivers that already |
| * hold a channel lock when calling async_tx_run_dependencies. |
| */ |
| enum submit_disposition { |
| ASYNC_TX_SUBMITTED, |
| ASYNC_TX_CHANNEL_SWITCH, |
| ASYNC_TX_DIRECT_SUBMIT, |
| }; |
| |
| void |
| async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx, |
| struct async_submit_ctl *submit) |
| { |
| struct dma_async_tx_descriptor *depend_tx = submit->depend_tx; |
| |
| tx->callback = submit->cb_fn; |
| tx->callback_param = submit->cb_param; |
| |
| if (depend_tx) { |
| enum submit_disposition s; |
| |
| /* sanity check the dependency chain: |
| * 1/ if ack is already set then we cannot be sure |
| * we are referring to the correct operation |
| * 2/ dependencies are 1:1 i.e. two transactions can |
| * not depend on the same parent |
| */ |
| BUG_ON(async_tx_test_ack(depend_tx) || txd_next(depend_tx) || |
| txd_parent(tx)); |
| |
| /* the lock prevents async_tx_run_dependencies from missing |
| * the setting of ->next when ->parent != NULL |
| */ |
| txd_lock(depend_tx); |
| if (txd_parent(depend_tx)) { |
| /* we have a parent so we can not submit directly |
| * if we are staying on the same channel: append |
| * else: channel switch |
| */ |
| if (depend_tx->chan == chan) { |
| txd_chain(depend_tx, tx); |
| s = ASYNC_TX_SUBMITTED; |
| } else |
| s = ASYNC_TX_CHANNEL_SWITCH; |
| } else { |
| /* we do not have a parent so we may be able to submit |
| * directly if we are staying on the same channel |
| */ |
| if (depend_tx->chan == chan) |
| s = ASYNC_TX_DIRECT_SUBMIT; |
| else |
| s = ASYNC_TX_CHANNEL_SWITCH; |
| } |
| txd_unlock(depend_tx); |
| |
| switch (s) { |
| case ASYNC_TX_SUBMITTED: |
| break; |
| case ASYNC_TX_CHANNEL_SWITCH: |
| async_tx_channel_switch(depend_tx, tx); |
| break; |
| case ASYNC_TX_DIRECT_SUBMIT: |
| txd_clear_parent(tx); |
| tx->tx_submit(tx); |
| break; |
| } |
| } else { |
| txd_clear_parent(tx); |
| tx->tx_submit(tx); |
| } |
| |
| if (submit->flags & ASYNC_TX_ACK) |
| async_tx_ack(tx); |
| |
| if (depend_tx) |
| async_tx_ack(depend_tx); |
| } |
| EXPORT_SYMBOL_GPL(async_tx_submit); |
| |
| /** |
| * async_trigger_callback - schedules the callback function to be run |
| * @submit: submission and completion parameters |
| * |
| * honored flags: ASYNC_TX_ACK |
| * |
| * The callback is run after any dependent operations have completed. |
| */ |
| struct dma_async_tx_descriptor * |
| async_trigger_callback(struct async_submit_ctl *submit) |
| { |
| struct dma_chan *chan; |
| struct dma_device *device; |
| struct dma_async_tx_descriptor *tx; |
| struct dma_async_tx_descriptor *depend_tx = submit->depend_tx; |
| |
| if (depend_tx) { |
| chan = depend_tx->chan; |
| device = chan->device; |
| |
| /* see if we can schedule an interrupt |
| * otherwise poll for completion |
| */ |
| if (device && !dma_has_cap(DMA_INTERRUPT, device->cap_mask)) |
| device = NULL; |
| |
| tx = device ? device->device_prep_dma_interrupt(chan, 0) : NULL; |
| } else |
| tx = NULL; |
| |
| if (tx) { |
| pr_debug("%s: (async)\n", __func__); |
| |
| async_tx_submit(chan, tx, submit); |
| } else { |
| pr_debug("%s: (sync)\n", __func__); |
| |
| /* wait for any prerequisite operations */ |
| async_tx_quiesce(&submit->depend_tx); |
| |
| async_tx_sync_epilog(submit); |
| } |
| |
| return tx; |
| } |
| EXPORT_SYMBOL_GPL(async_trigger_callback); |
| |
| /** |
| * async_tx_quiesce - ensure tx is complete and freeable upon return |
| * @tx - transaction to quiesce |
| */ |
| void async_tx_quiesce(struct dma_async_tx_descriptor **tx) |
| { |
| if (*tx) { |
| /* if ack is already set then we cannot be sure |
| * we are referring to the correct operation |
| */ |
| BUG_ON(async_tx_test_ack(*tx)); |
| if (dma_wait_for_async_tx(*tx) != DMA_SUCCESS) |
| panic("%s: DMA error waiting for transaction\n", |
| __func__); |
| async_tx_ack(*tx); |
| *tx = NULL; |
| } |
| } |
| EXPORT_SYMBOL_GPL(async_tx_quiesce); |
| |
| MODULE_AUTHOR("Intel Corporation"); |
| MODULE_DESCRIPTION("Asynchronous Bulk Memory Transactions API"); |
| MODULE_LICENSE("GPL"); |