| /* |
| * arch/arm/mach-spear6xx/spear6xx.c |
| * |
| * SPEAr6XX machines common source file |
| * |
| * Copyright (C) 2009 ST Microelectronics |
| * Rajeev Kumar<rajeev-dlh.kumar@st.com> |
| * |
| * Copyright 2012 Stefan Roese <sr@denx.de> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/amba/pl08x.h> |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_platform.h> |
| #include <linux/amba/pl080.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/time.h> |
| #include <asm/mach/map.h> |
| #include "pl080.h" |
| #include "generic.h" |
| #include <mach/spear.h> |
| #include <mach/misc_regs.h> |
| |
| /* dmac device registration */ |
| static struct pl08x_channel_data spear600_dma_info[] = { |
| { |
| .bus_id = "ssp1_rx", |
| .min_signal = 0, |
| .max_signal = 0, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ssp1_tx", |
| .min_signal = 1, |
| .max_signal = 1, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "uart0_rx", |
| .min_signal = 2, |
| .max_signal = 2, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "uart0_tx", |
| .min_signal = 3, |
| .max_signal = 3, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "uart1_rx", |
| .min_signal = 4, |
| .max_signal = 4, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "uart1_tx", |
| .min_signal = 5, |
| .max_signal = 5, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ssp2_rx", |
| .min_signal = 6, |
| .max_signal = 6, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ssp2_tx", |
| .min_signal = 7, |
| .max_signal = 7, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ssp0_rx", |
| .min_signal = 8, |
| .max_signal = 8, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ssp0_tx", |
| .min_signal = 9, |
| .max_signal = 9, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "i2c_rx", |
| .min_signal = 10, |
| .max_signal = 10, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "i2c_tx", |
| .min_signal = 11, |
| .max_signal = 11, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "irda", |
| .min_signal = 12, |
| .max_signal = 12, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "adc", |
| .min_signal = 13, |
| .max_signal = 13, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "to_jpeg", |
| .min_signal = 14, |
| .max_signal = 14, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "from_jpeg", |
| .min_signal = 15, |
| .max_signal = 15, |
| .muxval = 0, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras0_rx", |
| .min_signal = 0, |
| .max_signal = 0, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras0_tx", |
| .min_signal = 1, |
| .max_signal = 1, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras1_rx", |
| .min_signal = 2, |
| .max_signal = 2, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras1_tx", |
| .min_signal = 3, |
| .max_signal = 3, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras2_rx", |
| .min_signal = 4, |
| .max_signal = 4, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras2_tx", |
| .min_signal = 5, |
| .max_signal = 5, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras3_rx", |
| .min_signal = 6, |
| .max_signal = 6, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras3_tx", |
| .min_signal = 7, |
| .max_signal = 7, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras4_rx", |
| .min_signal = 8, |
| .max_signal = 8, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras4_tx", |
| .min_signal = 9, |
| .max_signal = 9, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras5_rx", |
| .min_signal = 10, |
| .max_signal = 10, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras5_tx", |
| .min_signal = 11, |
| .max_signal = 11, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras6_rx", |
| .min_signal = 12, |
| .max_signal = 12, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras6_tx", |
| .min_signal = 13, |
| .max_signal = 13, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras7_rx", |
| .min_signal = 14, |
| .max_signal = 14, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ras7_tx", |
| .min_signal = 15, |
| .max_signal = 15, |
| .muxval = 1, |
| .periph_buses = PL08X_AHB1, |
| }, { |
| .bus_id = "ext0_rx", |
| .min_signal = 0, |
| .max_signal = 0, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext0_tx", |
| .min_signal = 1, |
| .max_signal = 1, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext1_rx", |
| .min_signal = 2, |
| .max_signal = 2, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext1_tx", |
| .min_signal = 3, |
| .max_signal = 3, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext2_rx", |
| .min_signal = 4, |
| .max_signal = 4, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext2_tx", |
| .min_signal = 5, |
| .max_signal = 5, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext3_rx", |
| .min_signal = 6, |
| .max_signal = 6, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext3_tx", |
| .min_signal = 7, |
| .max_signal = 7, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext4_rx", |
| .min_signal = 8, |
| .max_signal = 8, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext4_tx", |
| .min_signal = 9, |
| .max_signal = 9, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext5_rx", |
| .min_signal = 10, |
| .max_signal = 10, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext5_tx", |
| .min_signal = 11, |
| .max_signal = 11, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext6_rx", |
| .min_signal = 12, |
| .max_signal = 12, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext6_tx", |
| .min_signal = 13, |
| .max_signal = 13, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext7_rx", |
| .min_signal = 14, |
| .max_signal = 14, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, { |
| .bus_id = "ext7_tx", |
| .min_signal = 15, |
| .max_signal = 15, |
| .muxval = 2, |
| .periph_buses = PL08X_AHB2, |
| }, |
| }; |
| |
| static struct pl08x_platform_data spear6xx_pl080_plat_data = { |
| .memcpy_channel = { |
| .bus_id = "memcpy", |
| .cctl_memcpy = |
| (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ |
| PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ |
| PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ |
| PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ |
| PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \ |
| PL080_CONTROL_PROT_SYS), |
| }, |
| .lli_buses = PL08X_AHB1, |
| .mem_buses = PL08X_AHB1, |
| .get_xfer_signal = pl080_get_signal, |
| .put_xfer_signal = pl080_put_signal, |
| .slave_channels = spear600_dma_info, |
| .num_slave_channels = ARRAY_SIZE(spear600_dma_info), |
| }; |
| |
| /* |
| * Following will create 16MB static virtual/physical mappings |
| * PHYSICAL VIRTUAL |
| * 0xF0000000 0xF0000000 |
| * 0xF1000000 0xF1000000 |
| * 0xD0000000 0xFD000000 |
| * 0xFC000000 0xFC000000 |
| */ |
| struct map_desc spear6xx_io_desc[] __initdata = { |
| { |
| .virtual = (unsigned long)VA_SPEAR6XX_ML_CPU_BASE, |
| .pfn = __phys_to_pfn(SPEAR_ICM3_ML1_2_BASE), |
| .length = 2 * SZ_16M, |
| .type = MT_DEVICE |
| }, { |
| .virtual = (unsigned long)VA_SPEAR_ICM1_2_BASE, |
| .pfn = __phys_to_pfn(SPEAR_ICM1_2_BASE), |
| .length = SZ_16M, |
| .type = MT_DEVICE |
| }, { |
| .virtual = (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE, |
| .pfn = __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE), |
| .length = SZ_16M, |
| .type = MT_DEVICE |
| }, |
| }; |
| |
| /* This will create static memory mapping for selected devices */ |
| void __init spear6xx_map_io(void) |
| { |
| iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc)); |
| } |
| |
| void __init spear6xx_timer_init(void) |
| { |
| char pclk_name[] = "pll3_clk"; |
| struct clk *gpt_clk, *pclk; |
| |
| spear6xx_clk_init(MISC_BASE); |
| |
| /* get the system timer clock */ |
| gpt_clk = clk_get_sys("gpt0", NULL); |
| if (IS_ERR(gpt_clk)) { |
| pr_err("%s:couldn't get clk for gpt\n", __func__); |
| BUG(); |
| } |
| |
| /* get the suitable parent clock for timer*/ |
| pclk = clk_get(NULL, pclk_name); |
| if (IS_ERR(pclk)) { |
| pr_err("%s:couldn't get %s as parent for gpt\n", |
| __func__, pclk_name); |
| BUG(); |
| } |
| |
| clk_set_parent(gpt_clk, pclk); |
| clk_put(gpt_clk); |
| clk_put(pclk); |
| |
| spear_setup_of_timer(); |
| } |
| |
| /* Add auxdata to pass platform data */ |
| struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = { |
| OF_DEV_AUXDATA("arm,pl080", SPEAR_ICM3_DMA_BASE, NULL, |
| &spear6xx_pl080_plat_data), |
| {} |
| }; |
| |
| static void __init spear600_dt_init(void) |
| { |
| of_platform_populate(NULL, of_default_bus_match_table, |
| spear6xx_auxdata_lookup, NULL); |
| } |
| |
| static const char *spear600_dt_board_compat[] = { |
| "st,spear600", |
| NULL |
| }; |
| |
| DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)") |
| .map_io = spear6xx_map_io, |
| .init_time = spear6xx_timer_init, |
| .init_machine = spear600_dt_init, |
| .restart = spear_restart, |
| .dt_compat = spear600_dt_board_compat, |
| MACHINE_END |