| /* |
| * usbusy2y.c - ALSA USB US-428 Driver |
| * |
| 2005-04-14 Karsten Wiese |
| Version 0.8.7.2: |
| Call snd_card_free() instead of snd_card_free_in_thread() to prevent oops with dead keyboard symptom. |
| Tested ok with kernel 2.6.12-rc2. |
| |
| 2004-12-14 Karsten Wiese |
| Version 0.8.7.1: |
| snd_pcm_open for rawusb pcm-devices now returns -EBUSY if called without rawusb's hwdep device being open. |
| |
| 2004-12-02 Karsten Wiese |
| Version 0.8.7: |
| Use macro usb_maxpacket() for portability. |
| |
| 2004-10-26 Karsten Wiese |
| Version 0.8.6: |
| wake_up() process waiting in usX2Y_urbs_start() on error. |
| |
| 2004-10-21 Karsten Wiese |
| Version 0.8.5: |
| nrpacks is runtime or compiletime configurable now with tested values from 1 to 4. |
| |
| 2004-10-03 Karsten Wiese |
| Version 0.8.2: |
| Avoid any possible racing while in prepare callback. |
| |
| 2004-09-30 Karsten Wiese |
| Version 0.8.0: |
| Simplified things and made ohci work again. |
| |
| 2004-09-20 Karsten Wiese |
| Version 0.7.3: |
| Use usb_kill_urb() instead of deprecated (kernel 2.6.9) usb_unlink_urb(). |
| |
| 2004-07-13 Karsten Wiese |
| Version 0.7.1: |
| Don't sleep in START/STOP callbacks anymore. |
| us428 channels C/D not handled just for this version, sorry. |
| |
| 2004-06-21 Karsten Wiese |
| Version 0.6.4: |
| Temporarely suspend midi input |
| to sanely call usb_set_interface() when setting format. |
| |
| 2004-06-12 Karsten Wiese |
| Version 0.6.3: |
| Made it thus the following rule is enforced: |
| "All pcm substreams of one usX2Y have to operate at the same rate & format." |
| |
| 2004-04-06 Karsten Wiese |
| Version 0.6.0: |
| Runs on 2.6.5 kernel without any "--with-debug=" things. |
| us224 reported running. |
| |
| 2004-01-14 Karsten Wiese |
| Version 0.5.1: |
| Runs with 2.6.1 kernel. |
| |
| 2003-12-30 Karsten Wiese |
| Version 0.4.1: |
| Fix 24Bit 4Channel capturing for the us428. |
| |
| 2003-11-27 Karsten Wiese, Martin Langer |
| Version 0.4: |
| us122 support. |
| us224 could be tested by uncommenting the sections containing USB_ID_US224 |
| |
| 2003-11-03 Karsten Wiese |
| Version 0.3: |
| 24Bit support. |
| "arecord -D hw:1 -c 2 -r 48000 -M -f S24_3LE|aplay -D hw:1 -c 2 -r 48000 -M -f S24_3LE" works. |
| |
| 2003-08-22 Karsten Wiese |
| Version 0.0.8: |
| Removed EZUSB Firmware. First Stage Firmwaredownload is now done by tascam-firmware downloader. |
| See: |
| http://usb-midi-fw.sourceforge.net/tascam-firmware.tar.gz |
| |
| 2003-06-18 Karsten Wiese |
| Version 0.0.5: |
| changed to compile with kernel 2.4.21 and alsa 0.9.4 |
| |
| 2002-10-16 Karsten Wiese |
| Version 0.0.4: |
| compiles again with alsa-current. |
| USB_ISO_ASAP not used anymore (most of the time), instead |
| urb->start_frame is calculated here now, some calls inside usb-driver don't need to happen anymore. |
| |
| To get the best out of this: |
| Disable APM-support in the kernel as APM-BIOS calls (once each second) hard disable interrupt for many precious milliseconds. |
| This helped me much on my slowish PII 400 & PIII 500. |
| ACPI yet untested but might cause the same bad behaviour. |
| Use a kernel with lowlatency and preemptiv patches applied. |
| To autoload snd-usb-midi append a line |
| post-install snd-usb-us428 modprobe snd-usb-midi |
| to /etc/modules.conf. |
| |
| known problems: |
| sliders, knobs, lights not yet handled except MASTER Volume slider. |
| "pcm -c 2" doesn't work. "pcm -c 2 -m direct_interleaved" does. |
| KDE3: "Enable full duplex operation" deadlocks. |
| |
| |
| 2002-08-31 Karsten Wiese |
| Version 0.0.3: audio also simplex; |
| simplifying: iso urbs only 1 packet, melted structs. |
| ASYNC_UNLINK not used anymore: no more crashes so far..... |
| for alsa 0.9 rc3. |
| |
| 2002-08-09 Karsten Wiese |
| Version 0.0.2: midi works with snd-usb-midi, audio (only fullduplex now) with i.e. bristol. |
| The firmware has been sniffed from win2k us-428 driver 3.09. |
| |
| * Copyright (c) 2002 - 2004 Karsten Wiese |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/usb.h> |
| #include <sound/core.h> |
| #include <sound/initval.h> |
| #include <sound/pcm.h> |
| |
| #include <sound/rawmidi.h> |
| #include "usx2y.h" |
| #include "usbusx2y.h" |
| #include "usX2Yhwdep.h" |
| |
| |
| |
| MODULE_AUTHOR("Karsten Wiese <annabellesgarden@yahoo.de>"); |
| MODULE_DESCRIPTION("TASCAM "NAME_ALLCAPS" Version 0.8.7.2"); |
| MODULE_LICENSE("GPL"); |
| MODULE_SUPPORTED_DEVICE("{{TASCAM(0x1604),"NAME_ALLCAPS"(0x8001)(0x8005)(0x8007)}}"); |
| |
| static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ |
| static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */ |
| static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */ |
| |
| module_param_array(index, int, NULL, 0444); |
| MODULE_PARM_DESC(index, "Index value for "NAME_ALLCAPS"."); |
| module_param_array(id, charp, NULL, 0444); |
| MODULE_PARM_DESC(id, "ID string for "NAME_ALLCAPS"."); |
| module_param_array(enable, bool, NULL, 0444); |
| MODULE_PARM_DESC(enable, "Enable "NAME_ALLCAPS"."); |
| |
| |
| static int snd_usX2Y_card_used[SNDRV_CARDS]; |
| |
| static void usX2Y_usb_disconnect(struct usb_device* usb_device, void* ptr); |
| static void snd_usX2Y_card_private_free(struct snd_card *card); |
| |
| /* |
| * pipe 4 is used for switching the lamps, setting samplerate, volumes .... |
| */ |
| static void i_usX2Y_Out04Int(struct urb *urb) |
| { |
| #ifdef CONFIG_SND_DEBUG |
| if (urb->status) { |
| int i; |
| struct usX2Ydev *usX2Y = urb->context; |
| for (i = 0; i < 10 && usX2Y->AS04.urb[i] != urb; i++); |
| snd_printdd("i_usX2Y_Out04Int() urb %i status=%i\n", i, urb->status); |
| } |
| #endif |
| } |
| |
| static void i_usX2Y_In04Int(struct urb *urb) |
| { |
| int err = 0; |
| struct usX2Ydev *usX2Y = urb->context; |
| struct us428ctls_sharedmem *us428ctls = usX2Y->us428ctls_sharedmem; |
| |
| usX2Y->In04IntCalls++; |
| |
| if (urb->status) { |
| snd_printdd("Interrupt Pipe 4 came back with status=%i\n", urb->status); |
| return; |
| } |
| |
| // printk("%i:0x%02X ", 8, (int)((unsigned char*)usX2Y->In04Buf)[8]); Master volume shows 0 here if fader is at max during boot ?!? |
| if (us428ctls) { |
| int diff = -1; |
| if (-2 == us428ctls->CtlSnapShotLast) { |
| diff = 0; |
| memcpy(usX2Y->In04Last, usX2Y->In04Buf, sizeof(usX2Y->In04Last)); |
| us428ctls->CtlSnapShotLast = -1; |
| } else { |
| int i; |
| for (i = 0; i < 21; i++) { |
| if (usX2Y->In04Last[i] != ((char*)usX2Y->In04Buf)[i]) { |
| if (diff < 0) |
| diff = i; |
| usX2Y->In04Last[i] = ((char*)usX2Y->In04Buf)[i]; |
| } |
| } |
| } |
| if (0 <= diff) { |
| int n = us428ctls->CtlSnapShotLast + 1; |
| if (n >= N_us428_ctl_BUFS || n < 0) |
| n = 0; |
| memcpy(us428ctls->CtlSnapShot + n, usX2Y->In04Buf, sizeof(us428ctls->CtlSnapShot[0])); |
| us428ctls->CtlSnapShotDiffersAt[n] = diff; |
| us428ctls->CtlSnapShotLast = n; |
| wake_up(&usX2Y->us428ctls_wait_queue_head); |
| } |
| } |
| |
| |
| if (usX2Y->US04) { |
| if (0 == usX2Y->US04->submitted) |
| do { |
| err = usb_submit_urb(usX2Y->US04->urb[usX2Y->US04->submitted++], GFP_ATOMIC); |
| } while (!err && usX2Y->US04->submitted < usX2Y->US04->len); |
| } else |
| if (us428ctls && us428ctls->p4outLast >= 0 && us428ctls->p4outLast < N_us428_p4out_BUFS) { |
| if (us428ctls->p4outLast != us428ctls->p4outSent) { |
| int j, send = us428ctls->p4outSent + 1; |
| if (send >= N_us428_p4out_BUFS) |
| send = 0; |
| for (j = 0; j < URBS_AsyncSeq && !err; ++j) |
| if (0 == usX2Y->AS04.urb[j]->status) { |
| struct us428_p4out *p4out = us428ctls->p4out + send; // FIXME if more than 1 p4out is new, 1 gets lost. |
| usb_fill_bulk_urb(usX2Y->AS04.urb[j], usX2Y->dev, |
| usb_sndbulkpipe(usX2Y->dev, 0x04), &p4out->val.vol, |
| p4out->type == eLT_Light ? sizeof(struct us428_lights) : 5, |
| i_usX2Y_Out04Int, usX2Y); |
| err = usb_submit_urb(usX2Y->AS04.urb[j], GFP_ATOMIC); |
| us428ctls->p4outSent = send; |
| break; |
| } |
| } |
| } |
| |
| if (err) |
| snd_printk(KERN_ERR "In04Int() usb_submit_urb err=%i\n", err); |
| |
| urb->dev = usX2Y->dev; |
| usb_submit_urb(urb, GFP_ATOMIC); |
| } |
| |
| /* |
| * Prepare some urbs |
| */ |
| int usX2Y_AsyncSeq04_init(struct usX2Ydev *usX2Y) |
| { |
| int err = 0, |
| i; |
| |
| if (NULL == (usX2Y->AS04.buffer = kmalloc(URB_DataLen_AsyncSeq*URBS_AsyncSeq, GFP_KERNEL))) { |
| err = -ENOMEM; |
| } else |
| for (i = 0; i < URBS_AsyncSeq; ++i) { |
| if (NULL == (usX2Y->AS04.urb[i] = usb_alloc_urb(0, GFP_KERNEL))) { |
| err = -ENOMEM; |
| break; |
| } |
| usb_fill_bulk_urb( usX2Y->AS04.urb[i], usX2Y->dev, |
| usb_sndbulkpipe(usX2Y->dev, 0x04), |
| usX2Y->AS04.buffer + URB_DataLen_AsyncSeq*i, 0, |
| i_usX2Y_Out04Int, usX2Y |
| ); |
| } |
| return err; |
| } |
| |
| int usX2Y_In04_init(struct usX2Ydev *usX2Y) |
| { |
| if (! (usX2Y->In04urb = usb_alloc_urb(0, GFP_KERNEL))) |
| return -ENOMEM; |
| |
| if (! (usX2Y->In04Buf = kmalloc(21, GFP_KERNEL))) { |
| usb_free_urb(usX2Y->In04urb); |
| return -ENOMEM; |
| } |
| |
| init_waitqueue_head(&usX2Y->In04WaitQueue); |
| usb_fill_int_urb(usX2Y->In04urb, usX2Y->dev, usb_rcvintpipe(usX2Y->dev, 0x4), |
| usX2Y->In04Buf, 21, |
| i_usX2Y_In04Int, usX2Y, |
| 10); |
| return usb_submit_urb(usX2Y->In04urb, GFP_KERNEL); |
| } |
| |
| static void usX2Y_unlinkSeq(struct snd_usX2Y_AsyncSeq *S) |
| { |
| int i; |
| for (i = 0; i < URBS_AsyncSeq; ++i) { |
| usb_kill_urb(S->urb[i]); |
| usb_free_urb(S->urb[i]); |
| S->urb[i] = NULL; |
| } |
| kfree(S->buffer); |
| } |
| |
| |
| static struct usb_device_id snd_usX2Y_usb_id_table[] = { |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x1604, |
| .idProduct = USB_ID_US428 |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x1604, |
| .idProduct = USB_ID_US122 |
| }, |
| { |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE, |
| .idVendor = 0x1604, |
| .idProduct = USB_ID_US224 |
| }, |
| { /* terminator */ } |
| }; |
| |
| static int usX2Y_create_card(struct usb_device *device, |
| struct usb_interface *intf, |
| struct snd_card **cardp) |
| { |
| int dev; |
| struct snd_card * card; |
| int err; |
| |
| for (dev = 0; dev < SNDRV_CARDS; ++dev) |
| if (enable[dev] && !snd_usX2Y_card_used[dev]) |
| break; |
| if (dev >= SNDRV_CARDS) |
| return -ENODEV; |
| err = snd_card_new(&intf->dev, index[dev], id[dev], THIS_MODULE, |
| sizeof(struct usX2Ydev), &card); |
| if (err < 0) |
| return err; |
| snd_usX2Y_card_used[usX2Y(card)->card_index = dev] = 1; |
| card->private_free = snd_usX2Y_card_private_free; |
| usX2Y(card)->dev = device; |
| init_waitqueue_head(&usX2Y(card)->prepare_wait_queue); |
| mutex_init(&usX2Y(card)->pcm_mutex); |
| INIT_LIST_HEAD(&usX2Y(card)->midi_list); |
| strcpy(card->driver, "USB "NAME_ALLCAPS""); |
| sprintf(card->shortname, "TASCAM "NAME_ALLCAPS""); |
| sprintf(card->longname, "%s (%x:%x if %d at %03d/%03d)", |
| card->shortname, |
| le16_to_cpu(device->descriptor.idVendor), |
| le16_to_cpu(device->descriptor.idProduct), |
| 0,//us428(card)->usbmidi.ifnum, |
| usX2Y(card)->dev->bus->busnum, usX2Y(card)->dev->devnum |
| ); |
| *cardp = card; |
| return 0; |
| } |
| |
| |
| static int usX2Y_usb_probe(struct usb_device *device, |
| struct usb_interface *intf, |
| const struct usb_device_id *device_id, |
| struct snd_card **cardp) |
| { |
| int err; |
| struct snd_card * card; |
| |
| *cardp = NULL; |
| if (le16_to_cpu(device->descriptor.idVendor) != 0x1604 || |
| (le16_to_cpu(device->descriptor.idProduct) != USB_ID_US122 && |
| le16_to_cpu(device->descriptor.idProduct) != USB_ID_US224 && |
| le16_to_cpu(device->descriptor.idProduct) != USB_ID_US428)) |
| return -EINVAL; |
| |
| err = usX2Y_create_card(device, intf, &card); |
| if (err < 0) |
| return err; |
| if ((err = usX2Y_hwdep_new(card, device)) < 0 || |
| (err = snd_card_register(card)) < 0) { |
| snd_card_free(card); |
| return err; |
| } |
| *cardp = card; |
| return 0; |
| } |
| |
| /* |
| * new 2.5 USB kernel API |
| */ |
| static int snd_usX2Y_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| { |
| struct snd_card *card; |
| int err; |
| |
| err = usX2Y_usb_probe(interface_to_usbdev(intf), intf, id, &card); |
| if (err < 0) |
| return err; |
| dev_set_drvdata(&intf->dev, card); |
| return 0; |
| } |
| |
| static void snd_usX2Y_disconnect(struct usb_interface *intf) |
| { |
| usX2Y_usb_disconnect(interface_to_usbdev(intf), |
| usb_get_intfdata(intf)); |
| } |
| |
| MODULE_DEVICE_TABLE(usb, snd_usX2Y_usb_id_table); |
| static struct usb_driver snd_usX2Y_usb_driver = { |
| .name = "snd-usb-usx2y", |
| .probe = snd_usX2Y_probe, |
| .disconnect = snd_usX2Y_disconnect, |
| .id_table = snd_usX2Y_usb_id_table, |
| }; |
| |
| static void snd_usX2Y_card_private_free(struct snd_card *card) |
| { |
| kfree(usX2Y(card)->In04Buf); |
| usb_free_urb(usX2Y(card)->In04urb); |
| if (usX2Y(card)->us428ctls_sharedmem) |
| snd_free_pages(usX2Y(card)->us428ctls_sharedmem, sizeof(*usX2Y(card)->us428ctls_sharedmem)); |
| if (usX2Y(card)->card_index >= 0 && usX2Y(card)->card_index < SNDRV_CARDS) |
| snd_usX2Y_card_used[usX2Y(card)->card_index] = 0; |
| } |
| |
| /* |
| * Frees the device. |
| */ |
| static void usX2Y_usb_disconnect(struct usb_device *device, void* ptr) |
| { |
| if (ptr) { |
| struct snd_card *card = ptr; |
| struct usX2Ydev *usX2Y = usX2Y(card); |
| struct list_head *p; |
| usX2Y->chip_status = USX2Y_STAT_CHIP_HUP; |
| usX2Y_unlinkSeq(&usX2Y->AS04); |
| usb_kill_urb(usX2Y->In04urb); |
| snd_card_disconnect(card); |
| /* release the midi resources */ |
| list_for_each(p, &usX2Y->midi_list) { |
| snd_usbmidi_disconnect(p); |
| } |
| if (usX2Y->us428ctls_sharedmem) |
| wake_up(&usX2Y->us428ctls_wait_queue_head); |
| snd_card_free(card); |
| } |
| } |
| |
| module_usb_driver(snd_usX2Y_usb_driver); |