| /* |
| * PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery) |
| * |
| * Author: Dale Farnsworth <dale@farnsworth.org> |
| * |
| * 2007 (c) MontaVista, Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/stat.h> |
| #include <linux/pci.h> |
| |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| |
| #define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */ |
| |
| #ifdef CONFIG_SYSFS |
| /* 32-bit hex or dec stringified number + '\n' */ |
| #define MV64X60_VAL_LEN_MAX 11 |
| #define MV64X60_PCICFG_CPCI_HOTSWAP 0x68 |
| |
| static ssize_t mv64x60_hs_reg_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, char *buf, |
| loff_t off, size_t count) |
| { |
| struct pci_dev *phb; |
| u32 v; |
| |
| if (off > 0) |
| return 0; |
| if (count < MV64X60_VAL_LEN_MAX) |
| return -EINVAL; |
| |
| phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); |
| if (!phb) |
| return -ENODEV; |
| pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v); |
| pci_dev_put(phb); |
| |
| return sprintf(buf, "0x%08x\n", v); |
| } |
| |
| static ssize_t mv64x60_hs_reg_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, char *buf, |
| loff_t off, size_t count) |
| { |
| struct pci_dev *phb; |
| u32 v; |
| |
| if (off > 0) |
| return 0; |
| if (count <= 0) |
| return -EINVAL; |
| |
| if (sscanf(buf, "%i", &v) != 1) |
| return -EINVAL; |
| |
| phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); |
| if (!phb) |
| return -ENODEV; |
| pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v); |
| pci_dev_put(phb); |
| |
| return count; |
| } |
| |
| static struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */ |
| .attr = { |
| .name = "hs_reg", |
| .mode = S_IRUGO | S_IWUSR, |
| }, |
| .size = MV64X60_VAL_LEN_MAX, |
| .read = mv64x60_hs_reg_read, |
| .write = mv64x60_hs_reg_write, |
| }; |
| |
| static int __init mv64x60_sysfs_init(void) |
| { |
| struct device_node *np; |
| struct platform_device *pdev; |
| const unsigned int *prop; |
| |
| np = of_find_compatible_node(NULL, NULL, "marvell,mv64360"); |
| if (!np) |
| return 0; |
| |
| prop = of_get_property(np, "hs_reg_valid", NULL); |
| of_node_put(np); |
| |
| pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0); |
| if (IS_ERR(pdev)) |
| return PTR_ERR(pdev); |
| |
| return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr); |
| } |
| |
| subsys_initcall(mv64x60_sysfs_init); |
| |
| #endif /* CONFIG_SYSFS */ |
| |
| static void __devinit mv64x60_pci_fixup_early(struct pci_dev *dev) |
| { |
| /* |
| * Set the host bridge hdr_type to an invalid value so that |
| * pci_setup_device() will ignore the host bridge. |
| */ |
| dev->hdr_type = PCI_HEADER_TYPE_INVALID; |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360, |
| mv64x60_pci_fixup_early); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460, |
| mv64x60_pci_fixup_early); |
| |
| static int __init mv64x60_add_bridge(struct device_node *dev) |
| { |
| int len; |
| struct pci_controller *hose; |
| struct resource rsrc; |
| const int *bus_range; |
| int primary; |
| |
| memset(&rsrc, 0, sizeof(rsrc)); |
| |
| /* Fetch host bridge registers address */ |
| if (of_address_to_resource(dev, 0, &rsrc)) { |
| printk(KERN_ERR "No PCI reg property in device tree\n"); |
| return -ENODEV; |
| } |
| |
| /* Get bus range if any */ |
| bus_range = of_get_property(dev, "bus-range", &len); |
| if (bus_range == NULL || len < 2 * sizeof(int)) |
| printk(KERN_WARNING "Can't get bus-range for %s, assume" |
| " bus 0\n", dev->full_name); |
| |
| hose = pcibios_alloc_controller(dev); |
| if (!hose) |
| return -ENOMEM; |
| |
| hose->first_busno = bus_range ? bus_range[0] : 0; |
| hose->last_busno = bus_range ? bus_range[1] : 0xff; |
| |
| setup_indirect_pci(hose, rsrc.start, rsrc.start + 4, 0); |
| hose->self_busno = hose->first_busno; |
| |
| printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. " |
| "Firmware bus number: %d->%d\n", |
| (unsigned long long)rsrc.start, hose->first_busno, |
| hose->last_busno); |
| |
| /* Interpret the "ranges" property */ |
| /* This also maps the I/O region and sets isa_io/mem_base */ |
| primary = (hose->first_busno == 0); |
| pci_process_bridge_OF_ranges(hose, dev, primary); |
| |
| return 0; |
| } |
| |
| void __init mv64x60_pci_init(void) |
| { |
| struct device_node *np; |
| |
| for_each_compatible_node(np, "pci", "marvell,mv64360-pci") |
| mv64x60_add_bridge(np); |
| } |