drivers/usb/gadget/lh7a40x_udc.h - kernel/msm-4.9 - Gitiles

 /*
  * linux/drivers/usb/gadget/lh7a40x_udc.h
  * Sharp LH7A40x on-chip full speed USB device controllers
  *
  * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID
  * Copyright (C) 2004 Bo Henriksen, Nordic ID
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */

 #ifndef __LH7A40X_H_
 #define __LH7A40X_H_

 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/ioport.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/timer.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/proc_fs.h>
 #include <linux/mm.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>

 #include <asm/byteorder.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/unaligned.h>
 #include <asm/hardware.h>

 #include <linux/usb_ch9.h>
 #include <linux/usb_gadget.h>

 /*
  * Memory map
  */

 #define USB_FA					0x80000200	// function address register
 #define USB_PM					0x80000204	// power management register

 #define USB_IN_INT				0x80000208	// IN interrupt register bank (EP0-EP3)
 #define USB_OUT_INT				0x80000210	// OUT interrupt register bank (EP2)
 #define USB_INT					0x80000218	// interrupt register bank

 #define USB_IN_INT_EN			0x8000021C	// IN interrupt enable register bank
 #define USB_OUT_INT_EN			0x80000224	// OUT interrupt enable register bank
 #define USB_INT_EN				0x8000022C	// USB interrupt enable register bank

 #define USB_FRM_NUM1			0x80000230	// Frame number1 register
 #define USB_FRM_NUM2			0x80000234	// Frame number2 register
 #define USB_INDEX				0x80000238	// index register

 #define USB_IN_MAXP				0x80000240	// IN MAXP register
 #define USB_IN_CSR1				0x80000244	// IN CSR1 register/EP0 CSR register
 #define USB_EP0_CSR				0x80000244	// IN CSR1 register/EP0 CSR register
 #define USB_IN_CSR2				0x80000248	// IN CSR2 register
 #define USB_OUT_MAXP			0x8000024C	// OUT MAXP register

 #define USB_OUT_CSR1			0x80000250	// OUT CSR1 register
 #define USB_OUT_CSR2			0x80000254	// OUT CSR2 register
 #define USB_OUT_FIFO_WC1		0x80000258	// OUT FIFO write count1 register
 #define USB_OUT_FIFO_WC2		0x8000025C	// OUT FIFO write count2 register

 #define USB_RESET				0x8000044C	// USB reset register

 #define	USB_EP0_FIFO			0x80000280
 #define	USB_EP1_FIFO			0x80000284
 #define	USB_EP2_FIFO			0x80000288
 #define	USB_EP3_FIFO			0x8000028c

 /*
  * USB reset register
  */
 #define USB_RESET_APB			(1<<1)	//resets USB APB control side WRITE
 #define USB_RESET_IO			(1<<0)	//resets USB IO side WRITE

 /*
  * USB function address register
  */
 #define USB_FA_ADDR_UPDATE		(1<<7)
 #define USB_FA_FUNCTION_ADDR	(0x7F)

 /*
  * Power Management register
  */
 #define PM_USB_DCP				(1<<5)
 #define PM_USB_ENABLE			(1<<4)
 #define PM_USB_RESET			(1<<3)
 #define PM_UC_RESUME			(1<<2)
 #define PM_SUSPEND_MODE			(1<<1)
 #define PM_ENABLE_SUSPEND		(1<<0)

 /*
  * IN interrupt register
  */
 #define USB_IN_INT_EP3				(1<<3)
 #define USB_IN_INT_EP1				(1<<1)
 #define USB_IN_INT_EP0				(1<<0)

 /*
  * OUT interrupt register
  */
 #define USB_OUT_INT_EP2				(1<<2)

 /*
  * USB interrupt register
  */
 #define USB_INT_RESET_INT			(1<<2)
 #define USB_INT_RESUME_INT			(1<<1)
 #define USB_INT_SUSPEND_INT			(1<<0)

 /*
  * USB interrupt enable register
  */
 #define USB_INT_EN_USB_RESET_INTER		(1<<2)
 #define USB_INT_EN_RESUME_INTER			(1<<1)
 #define USB_INT_EN_SUSPEND_INTER		(1<<0)

 /*
  * INCSR1 register
  */
 #define USB_IN_CSR1_CLR_DATA_TOGGLE		(1<<6)
 #define USB_IN_CSR1_SENT_STALL			(1<<5)
 #define USB_IN_CSR1_SEND_STALL			(1<<4)
 #define USB_IN_CSR1_FIFO_FLUSH			(1<<3)
 #define USB_IN_CSR1_FIFO_NOT_EMPTY		(1<<1)
 #define USB_IN_CSR1_IN_PKT_RDY			(1<<0)

 /*
  * INCSR2 register
  */
 #define USB_IN_CSR2_AUTO_SET			(1<<7)
 #define USB_IN_CSR2_USB_DMA_EN			(1<<4)

 /*
  * OUT CSR1 register
  */
 #define USB_OUT_CSR1_CLR_DATA_REG		(1<<7)
 #define USB_OUT_CSR1_SENT_STALL			(1<<6)
 #define USB_OUT_CSR1_SEND_STALL			(1<<5)
 #define USB_OUT_CSR1_FIFO_FLUSH			(1<<4)
 #define USB_OUT_CSR1_FIFO_FULL			(1<<1)
 #define USB_OUT_CSR1_OUT_PKT_RDY		(1<<0)

 /*
  * OUT CSR2 register
  */
 #define USB_OUT_CSR2_AUTO_CLR			(1<<7)
 #define USB_OUT_CSR2_USB_DMA_EN			(1<<4)

 /*
  * EP0 CSR
  */
 #define EP0_CLR_SETUP_END		(1<<7)	/* Clear "Setup Ends" Bit (w) */
 #define EP0_CLR_OUT				(1<<6)	/* Clear "Out packet ready" Bit (w) */
 #define EP0_SEND_STALL			(1<<5)	/* Send STALL Handshake (rw) */
 #define EP0_SETUP_END			(1<<4)	/* Setup Ends (r) */

 #define EP0_DATA_END			(1<<3)	/* Data end (rw) */
 #define EP0_SENT_STALL			(1<<2)	/* Sent Stall Handshake (r) */
 #define EP0_IN_PKT_RDY			(1<<1)	/* In packet ready (rw) */
 #define EP0_OUT_PKT_RDY			(1<<0)	/* Out packet ready (r) */

 /* general CSR */
 #define OUT_PKT_RDY		(1<<0)
 #define IN_PKT_RDY		(1<<0)

 /*
  * IN/OUT MAXP register
  */
 #define USB_OUT_MAXP_MAXP			(0xF)
 #define USB_IN_MAXP_MAXP			(0xF)

 // Max packet size
 //#define EP0_PACKETSIZE        0x10
 #define EP0_PACKETSIZE  	0x8
 #define EP0_MAXPACKETSIZE  	0x10

 #define UDC_MAX_ENDPOINTS       4

 #define WAIT_FOR_SETUP          0
 #define DATA_STATE_XMIT         1
 #define DATA_STATE_NEED_ZLP     2
 #define WAIT_FOR_OUT_STATUS     3
 #define DATA_STATE_RECV         4

 /* ********************************************************************************************* */
 /* IO
  */

 typedef enum ep_type {
 	ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
 } ep_type_t;

 struct lh7a40x_ep {
 	struct usb_ep ep;
 	struct lh7a40x_udc *dev;

 	const struct usb_endpoint_descriptor *desc;
 	struct list_head queue;
 	unsigned long pio_irqs;

 	u8 stopped;
 	u8 bEndpointAddress;
 	u8 bmAttributes;

 	ep_type_t ep_type;
 	u32 fifo;
 	u32 csr1;
 	u32 csr2;
 };

 struct lh7a40x_request {
 	struct usb_request req;
 	struct list_head queue;
 };

 struct lh7a40x_udc {
 	struct usb_gadget gadget;
 	struct usb_gadget_driver *driver;
 	struct device *dev;
 	spinlock_t lock;

 	int ep0state;
 	struct lh7a40x_ep ep[UDC_MAX_ENDPOINTS];

 	unsigned char usb_address;

 	unsigned req_pending:1, req_std:1, req_config:1;
 };

 extern struct lh7a40x_udc *the_controller;

 #define ep_is_in(EP) 		(((EP)->bEndpointAddress&USB_DIR_IN)==USB_DIR_IN)
 #define ep_index(EP) 		((EP)->bEndpointAddress&0xF)
 #define ep_maxpacket(EP) 	((EP)->ep.maxpacket)

 #endif
	/*
	* linux/drivers/usb/gadget/lh7a40x_udc.h
	* Sharp LH7A40x on-chip full speed USB device controllers
	*
	* Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID
	* Copyright (C) 2004 Bo Henriksen, Nordic ID
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*
	*/

	#ifndef __LH7A40X_H_
	#define __LH7A40X_H_

	#include <linux/config.h>
	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/ioport.h>
	#include <linux/types.h>
	#include <linux/errno.h>
	#include <linux/delay.h>
	#include <linux/sched.h>
	#include <linux/slab.h>
	#include <linux/init.h>
	#include <linux/timer.h>
	#include <linux/list.h>
	#include <linux/interrupt.h>
	#include <linux/proc_fs.h>
	#include <linux/mm.h>
	#include <linux/device.h>
	#include <linux/dma-mapping.h>

	#include <asm/byteorder.h>
	#include <asm/dma.h>
	#include <asm/io.h>
	#include <asm/irq.h>
	#include <asm/system.h>
	#include <asm/unaligned.h>
	#include <asm/hardware.h>

	#include <linux/usb_ch9.h>
	#include <linux/usb_gadget.h>

	/*
	* Memory map
	*/

	#define USB_FA 0x80000200 // function address register
	#define USB_PM 0x80000204 // power management register

	#define USB_IN_INT 0x80000208 // IN interrupt register bank (EP0-EP3)
	#define USB_OUT_INT 0x80000210 // OUT interrupt register bank (EP2)
	#define USB_INT 0x80000218 // interrupt register bank

	#define USB_IN_INT_EN 0x8000021C // IN interrupt enable register bank
	#define USB_OUT_INT_EN 0x80000224 // OUT interrupt enable register bank
	#define USB_INT_EN 0x8000022C // USB interrupt enable register bank

	#define USB_FRM_NUM1 0x80000230 // Frame number1 register
	#define USB_FRM_NUM2 0x80000234 // Frame number2 register
	#define USB_INDEX 0x80000238 // index register

	#define USB_IN_MAXP 0x80000240 // IN MAXP register
	#define USB_IN_CSR1 0x80000244 // IN CSR1 register/EP0 CSR register
	#define USB_EP0_CSR 0x80000244 // IN CSR1 register/EP0 CSR register
	#define USB_IN_CSR2 0x80000248 // IN CSR2 register
	#define USB_OUT_MAXP 0x8000024C // OUT MAXP register

	#define USB_OUT_CSR1 0x80000250 // OUT CSR1 register
	#define USB_OUT_CSR2 0x80000254 // OUT CSR2 register
	#define USB_OUT_FIFO_WC1 0x80000258 // OUT FIFO write count1 register
	#define USB_OUT_FIFO_WC2 0x8000025C // OUT FIFO write count2 register

	#define USB_RESET 0x8000044C // USB reset register

	#define USB_EP0_FIFO 0x80000280
	#define USB_EP1_FIFO 0x80000284
	#define USB_EP2_FIFO 0x80000288
	#define USB_EP3_FIFO 0x8000028c

	/*
	* USB reset register
	*/
	#define USB_RESET_APB (1<<1) //resets USB APB control side WRITE
	#define USB_RESET_IO (1<<0) //resets USB IO side WRITE

	/*
	* USB function address register
	*/
	#define USB_FA_ADDR_UPDATE (1<<7)
	#define USB_FA_FUNCTION_ADDR (0x7F)

	/*
	* Power Management register
	*/
	#define PM_USB_DCP (1<<5)
	#define PM_USB_ENABLE (1<<4)
	#define PM_USB_RESET (1<<3)
	#define PM_UC_RESUME (1<<2)
	#define PM_SUSPEND_MODE (1<<1)
	#define PM_ENABLE_SUSPEND (1<<0)

	/*
	* IN interrupt register
	*/
	#define USB_IN_INT_EP3 (1<<3)
	#define USB_IN_INT_EP1 (1<<1)
	#define USB_IN_INT_EP0 (1<<0)

	/*
	* OUT interrupt register
	*/
	#define USB_OUT_INT_EP2 (1<<2)

	/*
	* USB interrupt register
	*/
	#define USB_INT_RESET_INT (1<<2)
	#define USB_INT_RESUME_INT (1<<1)
	#define USB_INT_SUSPEND_INT (1<<0)

	/*
	* USB interrupt enable register
	*/
	#define USB_INT_EN_USB_RESET_INTER (1<<2)
	#define USB_INT_EN_RESUME_INTER (1<<1)
	#define USB_INT_EN_SUSPEND_INTER (1<<0)

	/*
	* INCSR1 register
	*/
	#define USB_IN_CSR1_CLR_DATA_TOGGLE (1<<6)
	#define USB_IN_CSR1_SENT_STALL (1<<5)
	#define USB_IN_CSR1_SEND_STALL (1<<4)
	#define USB_IN_CSR1_FIFO_FLUSH (1<<3)
	#define USB_IN_CSR1_FIFO_NOT_EMPTY (1<<1)
	#define USB_IN_CSR1_IN_PKT_RDY (1<<0)

	/*
	* INCSR2 register
	*/
	#define USB_IN_CSR2_AUTO_SET (1<<7)
	#define USB_IN_CSR2_USB_DMA_EN (1<<4)

	/*
	* OUT CSR1 register
	*/
	#define USB_OUT_CSR1_CLR_DATA_REG (1<<7)
	#define USB_OUT_CSR1_SENT_STALL (1<<6)
	#define USB_OUT_CSR1_SEND_STALL (1<<5)
	#define USB_OUT_CSR1_FIFO_FLUSH (1<<4)
	#define USB_OUT_CSR1_FIFO_FULL (1<<1)
	#define USB_OUT_CSR1_OUT_PKT_RDY (1<<0)

	/*
	* OUT CSR2 register
	*/
	#define USB_OUT_CSR2_AUTO_CLR (1<<7)
	#define USB_OUT_CSR2_USB_DMA_EN (1<<4)

	/*
	* EP0 CSR
	*/
	#define EP0_CLR_SETUP_END (1<<7) /* Clear "Setup Ends" Bit (w) */
	#define EP0_CLR_OUT (1<<6) /* Clear "Out packet ready" Bit (w) */
	#define EP0_SEND_STALL (1<<5) /* Send STALL Handshake (rw) */
	#define EP0_SETUP_END (1<<4) /* Setup Ends (r) */

	#define EP0_DATA_END (1<<3) /* Data end (rw) */
	#define EP0_SENT_STALL (1<<2) /* Sent Stall Handshake (r) */
	#define EP0_IN_PKT_RDY (1<<1) /* In packet ready (rw) */
	#define EP0_OUT_PKT_RDY (1<<0) /* Out packet ready (r) */

	/* general CSR */
	#define OUT_PKT_RDY (1<<0)
	#define IN_PKT_RDY (1<<0)

	/*
	* IN/OUT MAXP register
	*/
	#define USB_OUT_MAXP_MAXP (0xF)
	#define USB_IN_MAXP_MAXP (0xF)

	// Max packet size
	//#define EP0_PACKETSIZE 0x10
	#define EP0_PACKETSIZE 0x8
	#define EP0_MAXPACKETSIZE 0x10

	#define UDC_MAX_ENDPOINTS 4

	#define WAIT_FOR_SETUP 0
	#define DATA_STATE_XMIT 1
	#define DATA_STATE_NEED_ZLP 2
	#define WAIT_FOR_OUT_STATUS 3
	#define DATA_STATE_RECV 4

	/* ********************************************************************************************* */
	/* IO
	*/

	typedef enum ep_type {
	ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
	} ep_type_t;

	struct lh7a40x_ep {
	struct usb_ep ep;
	struct lh7a40x_udc *dev;

	const struct usb_endpoint_descriptor *desc;
	struct list_head queue;
	unsigned long pio_irqs;

	u8 stopped;
	u8 bEndpointAddress;
	u8 bmAttributes;

	ep_type_t ep_type;
	u32 fifo;
	u32 csr1;
	u32 csr2;
	};

	struct lh7a40x_request {
	struct usb_request req;
	struct list_head queue;
	};

	struct lh7a40x_udc {
	struct usb_gadget gadget;
	struct usb_gadget_driver *driver;
	struct device *dev;
	spinlock_t lock;

	int ep0state;
	struct lh7a40x_ep ep[UDC_MAX_ENDPOINTS];

	unsigned char usb_address;

	unsigned req_pending:1, req_std:1, req_config:1;
	};

	extern struct lh7a40x_udc *the_controller;

	#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN)==USB_DIR_IN)
	#define ep_index(EP) ((EP)->bEndpointAddress&0xF)
	#define ep_maxpacket(EP) ((EP)->ep.maxpacket)

	#endif