Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 0d1a567c6eadd31450fb0a1d2688039f57669a78 / . / drivers / leds / leds-qpnp-wled.c
blob: 18a11633ff8f95c329f5a03249993e17e63866f9 [file] [log] [blame]
/* Copyright (c) 2014-2018, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/regmap.h>
#include <linux/errno.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/spmi.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/leds-qpnp-wled.h>
#include <linux/qpnp/qpnp-revid.h>
/* base addresses */
#define QPNP_WLED_CTRL_BASE "qpnp-wled-ctrl-base"
#define QPNP_WLED_SINK_BASE "qpnp-wled-sink-base"
/* ctrl registers */
#define QPNP_WLED_FAULT_STATUS(b) (b + 0x08)
#define QPNP_WLED_INT_RT_STS(b) (b + 0x10)
#define QPNP_WLED_EN_REG(b) (b + 0x46)
#define QPNP_WLED_FDBK_OP_REG(b) (b + 0x48)
#define QPNP_WLED_VREF_REG(b) (b + 0x49)
#define QPNP_WLED_BOOST_DUTY_REG(b) (b + 0x4B)
#define QPNP_WLED_SWITCH_FREQ_REG(b) (b + 0x4C)
#define QPNP_WLED_OVP_REG(b) (b + 0x4D)
#define QPNP_WLED_ILIM_REG(b) (b + 0x4E)
#define QPNP_WLED_AMOLED_VOUT_REG(b) (b + 0x4F)
#define QPNP_WLED_SOFTSTART_RAMP_DLY(b) (b + 0x53)
#define QPNP_WLED_VLOOP_COMP_RES_REG(b) (b + 0x55)
#define QPNP_WLED_VLOOP_COMP_GM_REG(b) (b + 0x56)
#define QPNP_WLED_EN_PSM_REG(b) (b + 0x5A)
#define QPNP_WLED_PSM_CTRL_REG(b) (b + 0x5B)
#define QPNP_WLED_LCD_AUTO_PFM_REG(b) (b + 0x5C)
#define QPNP_WLED_SC_PRO_REG(b) (b + 0x5E)
#define QPNP_WLED_SWIRE_AVDD_REG(b) (b + 0x5F)
#define QPNP_WLED_CTRL_SPARE_REG(b) (b + 0xDF)
#define QPNP_WLED_TEST1_REG(b) (b + 0xE2)
#define QPNP_WLED_TEST4_REG(b) (b + 0xE5)
#define QPNP_WLED_REF_7P7_TRIM_REG(b) (b + 0xF2)
#define QPNP_WLED_7P7_TRIM_MASK GENMASK(3, 0)
#define QPNP_WLED_EN_MASK 0x7F
#define QPNP_WLED_EN_SHIFT 7
#define QPNP_WLED_FDBK_OP_MASK 0xF8
#define QPNP_WLED_VREF_MASK GENMASK(3, 0)
#define QPNP_WLED_VLOOP_COMP_RES_MASK 0xF0
#define QPNP_WLED_VLOOP_COMP_RES_OVERWRITE 0x80
#define QPNP_WLED_LOOP_COMP_RES_STEP_KOHM 20
#define QPNP_WLED_LOOP_COMP_RES_MIN_KOHM 20
#define QPNP_WLED_LOOP_COMP_RES_MAX_KOHM 320
#define QPNP_WLED_VLOOP_COMP_GM_MASK GENMASK(3, 0)
#define QPNP_WLED_VLOOP_COMP_GM_OVERWRITE 0x80
#define QPNP_WLED_VLOOP_COMP_AUTO_GM_EN BIT(6)
#define QPNP_WLED_VLOOP_COMP_AUTO_GM_THRESH_MASK GENMASK(5, 4)
#define QPNP_WLED_VLOOP_COMP_AUTO_GM_THRESH_SHIFT 4
#define QPNP_WLED_LOOP_EA_GM_DFLT_AMOLED_PMI8994 0x03
#define QPNP_WLED_LOOP_GM_DFLT_AMOLED_PMI8998 0x09
#define QPNP_WLED_LOOP_GM_DFLT_WLED 0x09
#define QPNP_WLED_LOOP_EA_GM_MIN 0x0
#define QPNP_WLED_LOOP_EA_GM_MAX 0xF
#define QPNP_WLED_LOOP_AUTO_GM_THRESH_MAX 3
#define QPNP_WLED_LOOP_AUTO_GM_DFLT_THRESH 1
#define QPNP_WLED_VREF_PSM_MASK 0xF8
#define QPNP_WLED_VREF_PSM_STEP_MV 50
#define QPNP_WLED_VREF_PSM_MIN_MV 400
#define QPNP_WLED_VREF_PSM_MAX_MV 750
#define QPNP_WLED_VREF_PSM_DFLT_AMOLED_MV 450
#define QPNP_WLED_PSM_OVERWRITE_BIT BIT(7)
#define QPNP_WLED_LCD_AUTO_PFM_DFLT_THRESH 1
#define QPNP_WLED_LCD_AUTO_PFM_THRESH_MAX 0xF
#define QPNP_WLED_LCD_AUTO_PFM_EN_SHIFT 7
#define QPNP_WLED_LCD_AUTO_PFM_EN_BIT BIT(7)
#define QPNP_WLED_LCD_AUTO_PFM_THRESH_MASK GENMASK(3, 0)
#define QPNP_WLED_EN_PSM_BIT BIT(7)
#define QPNP_WLED_ILIM_MASK GENMASK(2, 0)
#define QPNP_WLED_ILIM_OVERWRITE BIT(7)
#define PMI8994_WLED_ILIM_MIN_MA 105
#define PMI8994_WLED_ILIM_MAX_MA 1980
#define PMI8994_WLED_DFLT_ILIM_MA 980
#define PMI8994_AMOLED_DFLT_ILIM_MA 385
#define PMI8998_WLED_ILIM_MAX_MA 1500
#define PMI8998_WLED_DFLT_ILIM_MA 970
#define PMI8998_AMOLED_DFLT_ILIM_MA 620
#define QPNP_WLED_BOOST_DUTY_MASK 0xFC
#define QPNP_WLED_BOOST_DUTY_STEP_NS 52
#define QPNP_WLED_BOOST_DUTY_MIN_NS 26
#define QPNP_WLED_BOOST_DUTY_MAX_NS 156
#define QPNP_WLED_DEF_BOOST_DUTY_NS 104
#define QPNP_WLED_SWITCH_FREQ_MASK GENMASK(3, 0)
#define QPNP_WLED_SWITCH_FREQ_OVERWRITE BIT(7)
#define QPNP_WLED_OVP_MASK GENMASK(1, 0)
#define QPNP_WLED_TEST4_EN_DEB_BYPASS_ILIM_BIT BIT(6)
#define QPNP_WLED_TEST4_EN_SH_FOR_SS_BIT BIT(5)
#define QPNP_WLED_TEST4_EN_CLAMP_BIT BIT(4)
#define QPNP_WLED_TEST4_EN_SOFT_START_BIT BIT(1)
#define QPNP_WLED_TEST4_EN_VREF_UP \
(QPNP_WLED_TEST4_EN_SH_FOR_SS_BIT | \
QPNP_WLED_TEST4_EN_CLAMP_BIT | \
QPNP_WLED_TEST4_EN_SOFT_START_BIT)
#define QPNP_WLED_TEST4_EN_IIND_UP 0x1
#define QPNP_WLED_ILIM_FAULT_BIT BIT(0)
#define QPNP_WLED_OVP_FAULT_BIT BIT(1)
#define QPNP_WLED_SC_FAULT_BIT BIT(2)
#define QPNP_WLED_OVP_FLT_RT_STS_BIT BIT(1)
/* QPNP_WLED_SOFTSTART_RAMP_DLY */
#define SOFTSTART_OVERWRITE_BIT BIT(7)
#define SOFTSTART_RAMP_DELAY_MASK GENMASK(2, 0)
/* sink registers */
#define QPNP_WLED_CURR_SINK_REG(b) (b + 0x46)
#define QPNP_WLED_SYNC_REG(b) (b + 0x47)
#define QPNP_WLED_MOD_REG(b) (b + 0x4A)
#define QPNP_WLED_HYB_THRES_REG(b) (b + 0x4B)
#define QPNP_WLED_MOD_EN_REG(b, n) (b + 0x50 + (n * 0x10))
#define QPNP_WLED_SYNC_DLY_REG(b, n) (QPNP_WLED_MOD_EN_REG(b, n) + 0x01)
#define QPNP_WLED_FS_CURR_REG(b, n) (QPNP_WLED_MOD_EN_REG(b, n) + 0x02)
#define QPNP_WLED_CABC_REG(b, n) (QPNP_WLED_MOD_EN_REG(b, n) + 0x06)
#define QPNP_WLED_BRIGHT_LSB_REG(b, n) (QPNP_WLED_MOD_EN_REG(b, n) + 0x07)
#define QPNP_WLED_BRIGHT_MSB_REG(b, n) (QPNP_WLED_MOD_EN_REG(b, n) + 0x08)
#define QPNP_WLED_SINK_TEST5_REG(b) (b + 0xE6)
#define QPNP_WLED_MOD_FREQ_1200_KHZ 1200
#define QPNP_WLED_MOD_FREQ_2400_KHZ 2400
#define QPNP_WLED_MOD_FREQ_9600_KHZ 9600
#define QPNP_WLED_MOD_FREQ_19200_KHZ 19200
#define QPNP_WLED_MOD_FREQ_MASK 0x3F
#define QPNP_WLED_MOD_FREQ_SHIFT 6
#define QPNP_WLED_ACC_CLK_FREQ_MASK 0xE7
#define QPNP_WLED_ACC_CLK_FREQ_SHIFT 3
#define QPNP_WLED_PHASE_STAG_MASK 0xDF
#define QPNP_WLED_PHASE_STAG_SHIFT 5
#define QPNP_WLED_DIM_RES_MASK 0xFD
#define QPNP_WLED_DIM_RES_SHIFT 1
#define QPNP_WLED_DIM_HYB_MASK 0xFB
#define QPNP_WLED_DIM_HYB_SHIFT 2
#define QPNP_WLED_DIM_ANA_MASK 0xFE
#define QPNP_WLED_HYB_THRES_MASK 0xF8
#define QPNP_WLED_HYB_THRES_MIN 78
#define QPNP_WLED_DEF_HYB_THRES 625
#define QPNP_WLED_HYB_THRES_MAX 10000
#define QPNP_WLED_MOD_EN_MASK 0x7F
#define QPNP_WLED_MOD_EN_SHFT 7
#define QPNP_WLED_MOD_EN 1
#define QPNP_WLED_GATE_DRV_MASK 0xFE
#define QPNP_WLED_SYNC_DLY_MASK GENMASK(2, 0)
#define QPNP_WLED_SYNC_DLY_MIN_US 0
#define QPNP_WLED_SYNC_DLY_MAX_US 1400
#define QPNP_WLED_SYNC_DLY_STEP_US 200
#define QPNP_WLED_DEF_SYNC_DLY_US 400
#define QPNP_WLED_FS_CURR_MASK GENMASK(3, 0)
#define QPNP_WLED_FS_CURR_MIN_UA 0
#define QPNP_WLED_FS_CURR_MAX_UA 30000
#define QPNP_WLED_FS_CURR_STEP_UA 2500
#define QPNP_WLED_CABC_MASK 0x80
#define QPNP_WLED_CABC_SHIFT 7
#define QPNP_WLED_CURR_SINK_SHIFT 4
#define QPNP_WLED_CURR_SINK_MASK GENMASK(7, 4)
#define QPNP_WLED_BRIGHT_LSB_MASK 0xFF
#define QPNP_WLED_BRIGHT_MSB_SHIFT 8
#define QPNP_WLED_BRIGHT_MSB_MASK 0x0F
#define QPNP_WLED_SYNC 0x0F
#define QPNP_WLED_SYNC_RESET 0x00
#define QPNP_WLED_SINK_TEST5_HYB 0x14
#define QPNP_WLED_SINK_TEST5_DIG 0x1E
#define QPNP_WLED_SINK_TEST5_HVG_PULL_STR_BIT BIT(3)
#define QPNP_WLED_SWITCH_FREQ_800_KHZ_CODE 0x0B
#define QPNP_WLED_SWITCH_FREQ_1600_KHZ_CODE 0x05
#define QPNP_WLED_DISP_SEL_REG(b) (b + 0x44)
#define QPNP_WLED_MODULE_RDY_REG(b) (b + 0x45)
#define QPNP_WLED_MODULE_EN_REG(b) (b + 0x46)
#define QPNP_WLED_MODULE_RDY_MASK 0x7F
#define QPNP_WLED_MODULE_RDY_SHIFT 7
#define QPNP_WLED_MODULE_EN_MASK BIT(7)
#define QPNP_WLED_MODULE_EN_SHIFT 7
#define QPNP_WLED_DISP_SEL_MASK 0x7F
#define QPNP_WLED_DISP_SEL_SHIFT 7
#define QPNP_WLED_EN_SC_DEB_CYCLES_MASK 0x79
#define QPNP_WLED_EN_DEB_CYCLES_MASK 0xF9
#define QPNP_WLED_EN_SC_SHIFT 7
#define QPNP_WLED_SC_PRO_EN_DSCHGR 0x8
#define QPNP_WLED_SC_DEB_CYCLES_MIN 2
#define QPNP_WLED_SC_DEB_CYCLES_MAX 16
#define QPNP_WLED_SC_DEB_CYCLES_SUB 2
#define QPNP_WLED_SC_DEB_CYCLES_DFLT 4
#define QPNP_WLED_EXT_FET_DTEST2 0x09
#define QPNP_WLED_SEC_ACCESS_REG(b) (b + 0xD0)
#define QPNP_WLED_SEC_UNLOCK 0xA5
#define NUM_DDIC_CODES 256
#define QPNP_WLED_MAX_STRINGS 4
#define QPNP_PM660_WLED_MAX_STRINGS 3
#define WLED_MAX_LEVEL_4095 4095
#define QPNP_WLED_RAMP_DLY_MS 20
#define QPNP_WLED_TRIGGER_NONE "none"
#define QPNP_WLED_STR_SIZE 20
#define QPNP_WLED_MIN_MSLEEP 20
#define QPNP_WLED_SC_DLY_MS 20
#define QPNP_WLED_SOFT_START_DLY_US 10000
#define NUM_SUPPORTED_AVDD_VOLTAGES 6
#define QPNP_WLED_DFLT_AVDD_MV 7600
#define QPNP_WLED_AVDD_MIN_MV 5650
#define QPNP_WLED_AVDD_MAX_MV 7900
#define QPNP_WLED_AVDD_STEP_MV 150
#define QPNP_WLED_AVDD_MIN_TRIM_VAL 0x0
#define QPNP_WLED_AVDD_MAX_TRIM_VAL 0xF
#define QPNP_WLED_AVDD_SEL_SPMI_BIT BIT(7)
#define QPNP_WLED_AVDD_SET_BIT BIT(4)
#define NUM_SUPPORTED_OVP_THRESHOLDS 4
#define NUM_SUPPORTED_ILIM_THRESHOLDS 8
#define QPNP_WLED_AVDD_MV_TO_REG(val) \
((val - QPNP_WLED_AVDD_MIN_MV) / QPNP_WLED_AVDD_STEP_MV)
/* output feedback mode */
enum qpnp_wled_fdbk_op {
QPNP_WLED_FDBK_AUTO,
QPNP_WLED_FDBK_WLED1,
QPNP_WLED_FDBK_WLED2,
QPNP_WLED_FDBK_WLED3,
QPNP_WLED_FDBK_WLED4,
};
/* dimming modes */
enum qpnp_wled_dim_mode {
QPNP_WLED_DIM_ANALOG,
QPNP_WLED_DIM_DIGITAL,
QPNP_WLED_DIM_HYBRID,
};
/* wled ctrl debug registers */
static u8 qpnp_wled_ctrl_dbg_regs[] = {
0x44, 0x46, 0x48, 0x49, 0x4b, 0x4c, 0x4d, 0x4e, 0x50, 0x51, 0x52, 0x53,
0x54, 0x55, 0x56, 0x57, 0x58, 0x5a, 0x5b, 0x5d, 0x5e, 0xe2
};
/* wled sink debug registers */
static u8 qpnp_wled_sink_dbg_regs[] = {
0x46, 0x47, 0x48, 0x4a, 0x4b,
0x50, 0x51, 0x52, 0x53, 0x56, 0x57, 0x58,
0x60, 0x61, 0x62, 0x63, 0x66, 0x67, 0x68,
0x70, 0x71, 0x72, 0x73, 0x76, 0x77, 0x78,
0x80, 0x81, 0x82, 0x83, 0x86, 0x87, 0x88,
0xe6,
};
static int qpnp_wled_avdd_target_voltages[NUM_SUPPORTED_AVDD_VOLTAGES] = {
7900, 7600, 7300, 6400, 6100, 5800,
};
static u8 qpnp_wled_ovp_reg_settings[NUM_SUPPORTED_AVDD_VOLTAGES] = {
0x0, 0x0, 0x1, 0x2, 0x2, 0x3,
};
static int qpnp_wled_avdd_trim_adjustments[NUM_SUPPORTED_AVDD_VOLTAGES] = {
3, 0, -2, 7, 3, 3,
};
static int qpnp_wled_ovp_thresholds_pmi8994[NUM_SUPPORTED_OVP_THRESHOLDS] = {
31000, 29500, 19400, 17800,
};
static int qpnp_wled_ovp_thresholds_pmi8998[NUM_SUPPORTED_OVP_THRESHOLDS] = {
31100, 29600, 19600, 18100,
};
static int qpnp_wled_ilim_settings_pmi8994[NUM_SUPPORTED_ILIM_THRESHOLDS] = {
105, 385, 660, 980, 1150, 1420, 1700, 1980,
};
static int qpnp_wled_ilim_settings_pmi8998[NUM_SUPPORTED_ILIM_THRESHOLDS] = {
105, 280, 450, 620, 970, 1150, 1300, 1500,
};
struct wled_vref_setting {
u32 min_uv;
u32 max_uv;
u32 step_uv;
u32 default_uv;
};
static struct wled_vref_setting vref_setting_pmi8994 = {
300000, 675000, 25000, 350000,
};
static struct wled_vref_setting vref_setting_pmi8998 = {
60000, 397500, 22500, 127500,
};
/**
* qpnp_wled - wed data structure
* @ cdev - led class device
* @ pdev - platform device
* @ work - worker for led operation
* @ wq - workqueue for setting brightness level
* @ lock - mutex lock for exclusive access
* @ fdbk_op - output feedback mode
* @ dim_mode - dimming mode
* @ ovp_irq - over voltage protection irq
* @ sc_irq - short circuit irq
* @ sc_cnt - short circuit irq count
* @ avdd_target_voltage_mv - target voltage for AVDD module in mV
* @ ctrl_base - base address for wled ctrl
* @ sink_base - base address for wled sink
* @ mod_freq_khz - modulator frequency in KHZ
* @ hyb_thres - threshold for hybrid dimming
* @ sync_dly_us - sync delay in us
* @ vref_uv - ref voltage in uv
* @ vref_psm_mv - ref psm voltage in mv
* @ loop_comp_res_kohm - control to select the compensation resistor
* @ loop_ea_gm - control to select the gm for the gm stage in control loop
* @ sc_deb_cycles - debounce time for short circuit detection
* @ switch_freq_khz - switching frequency in KHZ
* @ ovp_mv - over voltage protection in mv
* @ ilim_ma - current limiter in ma
* @ boost_duty_ns - boost duty cycle in ns
* @ fs_curr_ua - full scale current in ua
* @ ramp_ms - delay between ramp steps in ms
* @ ramp_step - ramp step size
* @ cons_sync_write_delay_us - delay between two consecutive writes to SYNC
* @ auto_calibration_ovp_count - OVP fault irq count to run auto calibration
* @ max_strings - Number of strings supported in WLED peripheral
* @ prev_level - Previous brightness level
* @ brt_map_table - Brightness map table
* @ strings - supported list of strings
* @ num_strings - number of strings
* @ loop_auto_gm_thresh - the clamping level for auto gm
* @ lcd_auto_pfm_thresh - the threshold for lcd auto pfm mode
* @ loop_auto_gm_en - select if auto gm is enabled
* @ lcd_auto_pfm_en - select if auto pfm is enabled in lcd mode
* @ lcd_psm_ctrl - select if psm needs to be controlled in lcd mode
* @ avdd_mode_spmi - enable avdd programming via spmi
* @ en_9b_dim_res - enable or disable 9bit dimming
* @ en_phase_stag - enable or disable phase staggering
* @ en_cabc - enable or disable cabc
* @ disp_type_amoled - type of display: LCD/AMOLED
* @ en_ext_pfet_sc_pro - enable sc protection on external pfet
* @ prev_state - previous state of WLED
* @ stepper_en - Flag to enable stepper algorithm
* @ ovp_irq_disabled - OVP interrupt disable status
* @ auto_calib_enabled - Flag to enable auto calibration feature
* @ auto_calib_done - Flag to indicate auto calibration is done
* @ module_dis_perm - Flat to keep module permanently disabled
* @ start_ovp_fault_time - Time when the OVP fault first occurred
*/
struct qpnp_wled {
struct led_classdev cdev;
struct platform_device *pdev;
struct regmap *regmap;
struct pmic_revid_data *pmic_rev_id;
struct work_struct work;
struct workqueue_struct *wq;
struct mutex lock;
struct mutex bus_lock;
enum qpnp_wled_fdbk_op fdbk_op;
enum qpnp_wled_dim_mode dim_mode;
int ovp_irq;
int sc_irq;
u32 sc_cnt;
u32 avdd_target_voltage_mv;
u16 ctrl_base;
u16 sink_base;
u16 mod_freq_khz;
u16 hyb_thres;
u16 sync_dly_us;
u32 vref_uv;
u16 vref_psm_mv;
u16 loop_comp_res_kohm;
u16 loop_ea_gm;
u16 sc_deb_cycles;
u16 switch_freq_khz;
u16 ovp_mv;
u16 ilim_ma;
u16 boost_duty_ns;
u16 fs_curr_ua;
u16 ramp_ms;
u16 ramp_step;
u16 cons_sync_write_delay_us;
u16 auto_calibration_ovp_count;
u16 max_strings;
u16 prev_level;
u16 *brt_map_table;
u8 strings[QPNP_WLED_MAX_STRINGS];
u8 num_strings;
u8 loop_auto_gm_thresh;
u8 lcd_auto_pfm_thresh;
bool loop_auto_gm_en;
bool lcd_auto_pfm_en;
bool lcd_psm_ctrl;
bool avdd_mode_spmi;
bool en_9b_dim_res;
bool en_phase_stag;
bool en_cabc;
bool disp_type_amoled;
bool en_ext_pfet_sc_pro;
bool prev_state;
bool stepper_en;
bool ovp_irq_disabled;
bool secure_mode;
bool auto_calib_enabled;
bool auto_calib_done;
bool module_dis_perm;
ktime_t start_ovp_fault_time;
};
static int qpnp_wled_step_delay_us = 52000;
module_param_named(
total_step_delay_us, qpnp_wled_step_delay_us, int, 0600
);
static int qpnp_wled_step_size_threshold = 3;
module_param_named(
step_size_threshold, qpnp_wled_step_size_threshold, int, 0600
);
static int qpnp_wled_step_delay_gain = 2;
module_param_named(
step_delay_gain, qpnp_wled_step_delay_gain, int, 0600
);
/* helper to read a pmic register */
static int qpnp_wled_read_reg(struct qpnp_wled *wled, u16 addr, u8 *data)
{
int rc;
uint val;
rc = regmap_read(wled->regmap, addr, &val);
if (rc < 0) {
dev_err(&wled->pdev->dev,
"Error reading address: %x(%d)\n", addr, rc);
return rc;
}
*data = (u8)val;
return 0;
}
/* helper to write a pmic register */
static int qpnp_wled_write_reg(struct qpnp_wled *wled, u16 addr, u8 data)
{
int rc;
mutex_lock(&wled->bus_lock);
rc = regmap_write(wled->regmap, addr, data);
if (rc < 0) {
dev_err(&wled->pdev->dev, "Error writing address: %x(%d)\n",
addr, rc);
goto out;
}
dev_dbg(&wled->pdev->dev, "wrote: WLED_0x%x = 0x%x\n", addr, data);
out:
mutex_unlock(&wled->bus_lock);
return rc;
}
static int qpnp_wled_masked_write_reg(struct qpnp_wled *wled, u16 addr,
u8 mask, u8 data)
{
int rc;
mutex_lock(&wled->bus_lock);
rc = regmap_update_bits(wled->regmap, addr, mask, data);
if (rc < 0) {
dev_err(&wled->pdev->dev, "Error writing address: %x(%d)\n",
addr, rc);
goto out;
}
dev_dbg(&wled->pdev->dev, "wrote: WLED_0x%x = 0x%x\n", addr, data);
out:
mutex_unlock(&wled->bus_lock);
return rc;
}
static int qpnp_wled_sec_write_reg(struct qpnp_wled *wled, u16 addr, u8 data)
{
int rc;
u8 reg = QPNP_WLED_SEC_UNLOCK;
u16 base_addr = addr & 0xFF00;
mutex_lock(&wled->bus_lock);
rc = regmap_write(wled->regmap, QPNP_WLED_SEC_ACCESS_REG(base_addr),
reg);
if (rc < 0) {
dev_err(&wled->pdev->dev, "Error writing address: %x(%d)\n",
QPNP_WLED_SEC_ACCESS_REG(base_addr), rc);
goto out;
}
rc = regmap_write(wled->regmap, addr, data);
if (rc < 0) {
dev_err(&wled->pdev->dev, "Error writing address: %x(%d)\n",
addr, rc);
goto out;
}
dev_dbg(&wled->pdev->dev, "wrote: WLED_0x%x = 0x%x\n", addr, data);
out:
mutex_unlock(&wled->bus_lock);
return rc;
}
static int qpnp_wled_swire_avdd_config(struct qpnp_wled *wled)
{
int rc;
u8 val;
if (wled->pmic_rev_id->pmic_subtype != PMI8998_SUBTYPE &&
wled->pmic_rev_id->pmic_subtype != PM660L_SUBTYPE)
return 0;
if (!wled->disp_type_amoled || wled->avdd_mode_spmi)
return 0;
val = QPNP_WLED_AVDD_MV_TO_REG(wled->avdd_target_voltage_mv);
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_SWIRE_AVDD_REG(wled->ctrl_base), val);
return rc;
}
static int qpnp_wled_sync_reg_toggle(struct qpnp_wled *wled)
{
int rc;
u8 reg;
/* sync */
reg = QPNP_WLED_SYNC;
rc = qpnp_wled_write_reg(wled, QPNP_WLED_SYNC_REG(wled->sink_base),
reg);
if (rc < 0)
return rc;
if (wled->cons_sync_write_delay_us)
usleep_range(wled->cons_sync_write_delay_us,
wled->cons_sync_write_delay_us + 1);
reg = QPNP_WLED_SYNC_RESET;
rc = qpnp_wled_write_reg(wled, QPNP_WLED_SYNC_REG(wled->sink_base),
reg);
if (rc < 0)
return rc;
return 0;
}
/* set wled to a level of brightness */
static int qpnp_wled_set_level(struct qpnp_wled *wled, int level)
{
int i, rc;
u8 reg;
u16 low_limit = WLED_MAX_LEVEL_4095 * 4 / 1000;
/* WLED's lower limit of operation is 0.4% */
if (level > 0 && level < low_limit)
level = low_limit;
/* set brightness registers */
for (i = 0; i < wled->max_strings; i++) {
reg = level & QPNP_WLED_BRIGHT_LSB_MASK;
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_BRIGHT_LSB_REG(wled->sink_base,
wled->strings[i]), reg);
if (rc < 0)
return rc;
reg = level >> QPNP_WLED_BRIGHT_MSB_SHIFT;
reg = reg & QPNP_WLED_BRIGHT_MSB_MASK;
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_BRIGHT_MSB_REG(wled->sink_base,
wled->strings[i]), reg);
if (rc < 0)
return rc;
}
rc = qpnp_wled_sync_reg_toggle(wled);
if (rc < 0) {
dev_err(&wled->pdev->dev, "Failed to toggle sync reg %d\n", rc);
return rc;
}
pr_debug("level:%d\n", level);
return 0;
}
static int qpnp_wled_set_map_level(struct qpnp_wled *wled, int level)
{
int rc, i;
if (level < wled->prev_level) {
for (i = wled->prev_level; i >= level; i--) {
rc = qpnp_wled_set_level(wled, wled->brt_map_table[i]);
if (rc < 0) {
pr_err("set brightness level failed, rc:%d\n",
rc);
return rc;
}
}
} else if (level > wled->prev_level) {
for (i = wled->prev_level; i <= level; i++) {
rc = qpnp_wled_set_level(wled, wled->brt_map_table[i]);
if (rc < 0) {
pr_err("set brightness level failed, rc:%d\n",
rc);
return rc;
}
}
}
return 0;
}
static int qpnp_wled_set_step_level(struct qpnp_wled *wled, int new_level)
{
int rc, i, num_steps, delay_us;
u16 level, start_level, end_level, step_size;
bool level_inc = false;
level = wled->prev_level;
start_level = wled->brt_map_table[level];
end_level = wled->brt_map_table[new_level];
level_inc = (new_level > level);
num_steps = abs(start_level - end_level);
if (!num_steps)
return 0;
delay_us = qpnp_wled_step_delay_us / num_steps;
pr_debug("level goes from [%d %d] num_steps: %d, delay: %d\n",
start_level, end_level, num_steps, delay_us);
if (delay_us < 500) {
step_size = 1000 / delay_us;
num_steps = num_steps / step_size;
delay_us = 1000;
} else {
if (num_steps < qpnp_wled_step_size_threshold)
delay_us *= qpnp_wled_step_delay_gain;
step_size = 1;
}
i = start_level;
while (num_steps--) {
if (level_inc)
i += step_size;
else
i -= step_size;
rc = qpnp_wled_set_level(wled, i);
if (rc < 0)
return rc;
if (delay_us > 0) {
if (delay_us < 20000)
usleep_range(delay_us, delay_us + 1);
else
msleep(delay_us / USEC_PER_MSEC);
}
}
if (i != end_level) {
i = end_level;
rc = qpnp_wled_set_level(wled, i);
if (rc < 0)
return rc;
}
return 0;
}
static int qpnp_wled_psm_config(struct qpnp_wled *wled, bool enable)
{
int rc;
if (!wled->lcd_psm_ctrl)
return 0;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_EN_PSM_REG(wled->ctrl_base),
QPNP_WLED_EN_PSM_BIT,
enable ? QPNP_WLED_EN_PSM_BIT : 0);
if (rc < 0)
return rc;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_PSM_CTRL_REG(wled->ctrl_base),
QPNP_WLED_PSM_OVERWRITE_BIT,
enable ? QPNP_WLED_PSM_OVERWRITE_BIT : 0);
if (rc < 0)
return rc;
return 0;
}
static int qpnp_wled_module_en(struct qpnp_wled *wled,
u16 base_addr, bool state)
{
int rc;
if (wled->module_dis_perm)
return 0;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_MODULE_EN_REG(base_addr),
QPNP_WLED_MODULE_EN_MASK,
state << QPNP_WLED_MODULE_EN_SHIFT);
if (rc < 0)
return rc;
/*
* Wait for at least 10ms before enabling OVP fault interrupt after
* enabling the module so that soft start is completed. Also, this
* delay can be used to control PSM during enable when required. Keep
* OVP interrupt disabled when the module is disabled.
*/
if (state) {
usleep_range(QPNP_WLED_SOFT_START_DLY_US,
QPNP_WLED_SOFT_START_DLY_US + 1000);
rc = qpnp_wled_psm_config(wled, false);
if (rc < 0)
return rc;
if (wled->ovp_irq > 0 && wled->ovp_irq_disabled) {
enable_irq(wled->ovp_irq);
wled->ovp_irq_disabled = false;
}
} else {
if (wled->ovp_irq > 0 && !wled->ovp_irq_disabled) {
disable_irq(wled->ovp_irq);
wled->ovp_irq_disabled = true;
}
rc = qpnp_wled_psm_config(wled, true);
if (rc < 0)
return rc;
}
return 0;
}
/* sysfs store function for ramp */
static ssize_t qpnp_wled_ramp_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct qpnp_wled *wled = dev_get_drvdata(dev);
int i, rc;
mutex_lock(&wled->lock);
if (!wled->cdev.brightness) {
rc = qpnp_wled_module_en(wled, wled->ctrl_base, true);
if (rc) {
dev_err(&wled->pdev->dev, "wled enable failed\n");
goto unlock_mutex;
}
}
/* ramp up */
for (i = 0; i <= wled->cdev.max_brightness;) {
rc = qpnp_wled_set_level(wled, i);
if (rc) {
dev_err(&wled->pdev->dev, "wled set level failed\n");
goto restore_brightness;
}
if (wled->ramp_ms < QPNP_WLED_MIN_MSLEEP)
usleep_range(wled->ramp_ms * USEC_PER_MSEC,
wled->ramp_ms * USEC_PER_MSEC);
else
msleep(wled->ramp_ms);
if (i == wled->cdev.max_brightness)
break;
i += wled->ramp_step;
if (i > wled->cdev.max_brightness)
i = wled->cdev.max_brightness;
}
/* ramp down */
for (i = wled->cdev.max_brightness; i >= 0;) {
rc = qpnp_wled_set_level(wled, i);
if (rc) {
dev_err(&wled->pdev->dev, "wled set level failed\n");
goto restore_brightness;
}
if (wled->ramp_ms < QPNP_WLED_MIN_MSLEEP)
usleep_range(wled->ramp_ms * USEC_PER_MSEC,
wled->ramp_ms * USEC_PER_MSEC);
else
msleep(wled->ramp_ms);
if (i == 0)
break;
i -= wled->ramp_step;
if (i < 0)
i = 0;
}
dev_info(&wled->pdev->dev, "wled ramp complete\n");
restore_brightness:
/* restore the old brightness */
qpnp_wled_set_level(wled, wled->cdev.brightness);
if (!wled->cdev.brightness) {
rc = qpnp_wled_module_en(wled, wled->ctrl_base, false);
if (rc)
dev_err(&wled->pdev->dev, "wled enable failed\n");
}
unlock_mutex:
mutex_unlock(&wled->lock);
return count;
}
static int qpnp_wled_dump_regs(struct qpnp_wled *wled, u16 base_addr,
u8 dbg_regs[], u8 size, char *label,
int count, char *buf)
{
int i, rc;
u8 reg;
for (i = 0; i < size; i++) {
rc = qpnp_wled_read_reg(wled, base_addr + dbg_regs[i], &reg);
if (rc < 0)
return rc;
count += snprintf(buf + count, PAGE_SIZE - count,
"%s: REG_0x%x = 0x%x\n", label,
base_addr + dbg_regs[i], reg);
if (count >= PAGE_SIZE)
return PAGE_SIZE - 1;
}
return count;
}
/* sysfs show function for debug registers */
static ssize_t qpnp_wled_dump_regs_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct qpnp_wled *wled = dev_get_drvdata(dev);
int count = 0;
count = qpnp_wled_dump_regs(wled, wled->ctrl_base,
qpnp_wled_ctrl_dbg_regs,
ARRAY_SIZE(qpnp_wled_ctrl_dbg_regs),
"wled_ctrl", count, buf);
if (count < 0 || count == PAGE_SIZE - 1)
return count;
count = qpnp_wled_dump_regs(wled, wled->sink_base,
qpnp_wled_sink_dbg_regs,
ARRAY_SIZE(qpnp_wled_sink_dbg_regs),
"wled_sink", count, buf);
if (count < 0 || count == PAGE_SIZE - 1)
return count;
return count;
}
/* sysfs show function for ramp delay in each step */
static ssize_t qpnp_wled_ramp_ms_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct qpnp_wled *wled = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%d\n", wled->ramp_ms);
}
/* sysfs store function for ramp delay in each step */
static ssize_t qpnp_wled_ramp_ms_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct qpnp_wled *wled = dev_get_drvdata(dev);
int data, rc;
rc = kstrtoint(buf, 10, &data);
if (rc)
return rc;
wled->ramp_ms = data;
return count;
}
/* sysfs show function for ramp step */
static ssize_t qpnp_wled_ramp_step_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct qpnp_wled *wled = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%d\n", wled->ramp_step);
}
/* sysfs store function for ramp step */
static ssize_t qpnp_wled_ramp_step_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct qpnp_wled *wled = dev_get_drvdata(dev);
int data, rc;
rc = kstrtoint(buf, 10, &data);
if (rc)
return rc;
wled->ramp_step = data;
return count;
}
/* sysfs function for irqs enable/disable */
static ssize_t qpnp_wled_irq_control(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct qpnp_wled *wled = dev_get_drvdata(dev);
int val, rc;
rc = kstrtouint(buf, 0, &val);
if (rc < 0)
return rc;
if (val != 0 && val != 1)
return count;
mutex_lock(&wled->lock);
/* Disable irqs */
if (val == 1 && !wled->secure_mode) {
if (wled->ovp_irq > 0)
disable_irq(wled->ovp_irq);
if (wled->sc_irq > 0)
disable_irq(wled->sc_irq);
wled->secure_mode = true;
} else if (val == 0 && wled->secure_mode) {
if (wled->ovp_irq > 0)
enable_irq(wled->ovp_irq);
if (wled->sc_irq > 0)
enable_irq(wled->sc_irq);
wled->secure_mode = false;
}
mutex_unlock(&wled->lock);
return count;
}
/* sysfs show function for dim mode */
static ssize_t qpnp_wled_dim_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct qpnp_wled *wled = dev_get_drvdata(dev);
char *str;
if (wled->dim_mode == QPNP_WLED_DIM_ANALOG)
str = "analog";
else if (wled->dim_mode == QPNP_WLED_DIM_DIGITAL)
str = "digital";
else
str = "hybrid";
return snprintf(buf, PAGE_SIZE, "%s\n", str);
}
/* sysfs store function for dim mode*/
static ssize_t qpnp_wled_dim_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct qpnp_wled *wled = dev_get_drvdata(dev);
char str[QPNP_WLED_STR_SIZE + 1];
int rc, temp;
u8 reg;
if (snprintf(str, QPNP_WLED_STR_SIZE, "%s", buf) > QPNP_WLED_STR_SIZE)
return -EINVAL;
if (strcmp(str, "analog") == 0)
temp = QPNP_WLED_DIM_ANALOG;
else if (strcmp(str, "digital") == 0)
temp = QPNP_WLED_DIM_DIGITAL;
else
temp = QPNP_WLED_DIM_HYBRID;
if (temp == wled->dim_mode)
return count;
rc = qpnp_wled_read_reg(wled, QPNP_WLED_MOD_REG(wled->sink_base), &reg);
if (rc < 0)
return rc;
if (temp == QPNP_WLED_DIM_HYBRID) {
reg &= QPNP_WLED_DIM_HYB_MASK;
reg |= (1 << QPNP_WLED_DIM_HYB_SHIFT);
} else {
reg &= QPNP_WLED_DIM_HYB_MASK;
reg |= (0 << QPNP_WLED_DIM_HYB_SHIFT);
reg &= QPNP_WLED_DIM_ANA_MASK;
reg |= temp;
}
rc = qpnp_wled_write_reg(wled, QPNP_WLED_MOD_REG(wled->sink_base), reg);
if (rc)
return rc;
wled->dim_mode = temp;
return count;
}
/* sysfs show function for full scale current in ua*/
static ssize_t qpnp_wled_fs_curr_ua_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct qpnp_wled *wled = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%d\n", wled->fs_curr_ua);
}
/* sysfs store function for full scale current in ua*/
static ssize_t qpnp_wled_fs_curr_ua_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct qpnp_wled *wled = dev_get_drvdata(dev);
int data, i, rc;
u8 reg;
rc = kstrtoint(buf, 10, &data);
if (rc)
return rc;
for (i = 0; i < wled->max_strings; i++) {
if (data < QPNP_WLED_FS_CURR_MIN_UA)
data = QPNP_WLED_FS_CURR_MIN_UA;
else if (data > QPNP_WLED_FS_CURR_MAX_UA)
data = QPNP_WLED_FS_CURR_MAX_UA;
reg = data / QPNP_WLED_FS_CURR_STEP_UA;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_FS_CURR_REG(wled->sink_base, i),
QPNP_WLED_FS_CURR_MASK, reg);
if (rc < 0)
return rc;
}
wled->fs_curr_ua = data;
rc = qpnp_wled_sync_reg_toggle(wled);
if (rc < 0) {
dev_err(&wled->pdev->dev, "Failed to toggle sync reg %d\n", rc);
return rc;
}
return count;
}
/* sysfs attributes exported by wled */
static struct device_attribute qpnp_wled_attrs[] = {
__ATTR(dump_regs, 0664, qpnp_wled_dump_regs_show, NULL),
__ATTR(dim_mode, 0664, qpnp_wled_dim_mode_show,
qpnp_wled_dim_mode_store),
__ATTR(fs_curr_ua, 0664, qpnp_wled_fs_curr_ua_show,
qpnp_wled_fs_curr_ua_store),
__ATTR(start_ramp, 0664, NULL, qpnp_wled_ramp_store),
__ATTR(ramp_ms, 0664, qpnp_wled_ramp_ms_show, qpnp_wled_ramp_ms_store),
__ATTR(ramp_step, 0664, qpnp_wled_ramp_step_show,
qpnp_wled_ramp_step_store),
__ATTR(secure_mode, 0664, NULL, qpnp_wled_irq_control),
};
/* worker for setting wled brightness */
static void qpnp_wled_work(struct work_struct *work)
{
struct qpnp_wled *wled;
int level, level_255, rc;
wled = container_of(work, struct qpnp_wled, work);
mutex_lock(&wled->lock);
if (wled->secure_mode) {
pr_debug("Can not set brightness in secure_mode\n ");
goto unlock_mutex;
}
level = wled->cdev.brightness;
if (wled->brt_map_table) {
/*
* Change the 12 bit level to 8 bit level and use the mapped
* values for 12 bit level from brightness map table.
*/
level_255 = DIV_ROUND_CLOSEST(level, 16);
if (level_255 > 255)
level_255 = 255;
pr_debug("level: %d level_255: %d\n", level, level_255);
if (wled->stepper_en)
rc = qpnp_wled_set_step_level(wled, level_255);
else
rc = qpnp_wled_set_map_level(wled, level_255);
if (rc) {
dev_err(&wled->pdev->dev, "wled set level failed\n");
goto unlock_mutex;
}
wled->prev_level = level_255;
} else if (level) {
rc = qpnp_wled_set_level(wled, level);
if (rc) {
dev_err(&wled->pdev->dev, "wled set level failed\n");
goto unlock_mutex;
}
}
if (!!level != wled->prev_state) {
if (!!level) {
/*
* For AMOLED display in pmi8998, SWIRE_AVDD_DEFAULT has
* to be reconfigured every time the module is enabled.
*/
rc = qpnp_wled_swire_avdd_config(wled);
if (rc < 0) {
pr_err("Write to SWIRE_AVDD_DEFAULT register failed rc:%d\n",
rc);
goto unlock_mutex;
}
}
rc = qpnp_wled_module_en(wled, wled->ctrl_base, !!level);
if (rc) {
dev_err(&wled->pdev->dev, "wled %sable failed\n",
level ? "en" : "dis");
goto unlock_mutex;
}
}
wled->prev_state = !!level;
unlock_mutex:
mutex_unlock(&wled->lock);
}
/* get api registered with led classdev for wled brightness */
static enum led_brightness qpnp_wled_get(struct led_classdev *led_cdev)
{
struct qpnp_wled *wled;
wled = container_of(led_cdev, struct qpnp_wled, cdev);
return wled->cdev.brightness;
}
/* set api registered with led classdev for wled brightness */
static void qpnp_wled_set(struct led_classdev *led_cdev,
enum led_brightness level)
{
struct qpnp_wled *wled;
wled = container_of(led_cdev, struct qpnp_wled, cdev);
if (level < LED_OFF)
level = LED_OFF;
else if (level > wled->cdev.max_brightness)
level = wled->cdev.max_brightness;
wled->cdev.brightness = level;
queue_work(wled->wq, &wled->work);
}
static int qpnp_wled_set_disp(struct qpnp_wled *wled, u16 base_addr)
{
int rc;
u8 reg;
/* display type */
rc = qpnp_wled_read_reg(wled, QPNP_WLED_DISP_SEL_REG(base_addr), &reg);
if (rc < 0)
return rc;
reg &= QPNP_WLED_DISP_SEL_MASK;
reg |= (wled->disp_type_amoled << QPNP_WLED_DISP_SEL_SHIFT);
rc = qpnp_wled_sec_write_reg(wled, QPNP_WLED_DISP_SEL_REG(base_addr),
reg);
if (rc)
return rc;
if (wled->disp_type_amoled) {
/* Configure the PSM CTRL register for AMOLED */
if (wled->vref_psm_mv < QPNP_WLED_VREF_PSM_MIN_MV)
wled->vref_psm_mv = QPNP_WLED_VREF_PSM_MIN_MV;
else if (wled->vref_psm_mv > QPNP_WLED_VREF_PSM_MAX_MV)
wled->vref_psm_mv = QPNP_WLED_VREF_PSM_MAX_MV;
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_PSM_CTRL_REG(wled->ctrl_base), &reg);
if (rc < 0)
return rc;
reg &= QPNP_WLED_VREF_PSM_MASK;
reg |= ((wled->vref_psm_mv - QPNP_WLED_VREF_PSM_MIN_MV)/
QPNP_WLED_VREF_PSM_STEP_MV);
reg |= QPNP_WLED_PSM_OVERWRITE_BIT;
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_PSM_CTRL_REG(wled->ctrl_base), reg);
if (rc)
return rc;
/* Configure the VLOOP COMP RES register for AMOLED */
if (wled->loop_comp_res_kohm < QPNP_WLED_LOOP_COMP_RES_MIN_KOHM)
wled->loop_comp_res_kohm =
QPNP_WLED_LOOP_COMP_RES_MIN_KOHM;
else if (wled->loop_comp_res_kohm >
QPNP_WLED_LOOP_COMP_RES_MAX_KOHM)
wled->loop_comp_res_kohm =
QPNP_WLED_LOOP_COMP_RES_MAX_KOHM;
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_VLOOP_COMP_RES_REG(wled->ctrl_base),
&reg);
if (rc < 0)
return rc;
reg &= QPNP_WLED_VLOOP_COMP_RES_MASK;
reg |= ((wled->loop_comp_res_kohm -
QPNP_WLED_LOOP_COMP_RES_MIN_KOHM)/
QPNP_WLED_LOOP_COMP_RES_STEP_KOHM);
reg |= QPNP_WLED_VLOOP_COMP_RES_OVERWRITE;
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_VLOOP_COMP_RES_REG(wled->ctrl_base),
reg);
if (rc)
return rc;
/* Configure the CTRL TEST4 register for AMOLED */
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_TEST4_REG(wled->ctrl_base), &reg);
if (rc < 0)
return rc;
reg |= QPNP_WLED_TEST4_EN_IIND_UP;
rc = qpnp_wled_sec_write_reg(wled,
QPNP_WLED_TEST4_REG(base_addr), reg);
if (rc)
return rc;
} else {
/*
* enable VREF_UP to avoid false ovp on low brightness for LCD
*/
reg = QPNP_WLED_TEST4_EN_VREF_UP
| QPNP_WLED_TEST4_EN_DEB_BYPASS_ILIM_BIT;
rc = qpnp_wled_sec_write_reg(wled,
QPNP_WLED_TEST4_REG(base_addr), reg);
if (rc)
return rc;
}
return 0;
}
#define AUTO_CALIB_BRIGHTNESS 200
static int wled_auto_calibrate(struct qpnp_wled *wled)
{
int rc = 0, i;
u8 reg = 0, sink_config = 0, sink_test = 0, sink_valid = 0, int_sts;
/* read configured sink configuration */
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_CURR_SINK_REG(wled->sink_base), &sink_config);
if (rc < 0) {
pr_err("Failed to read SINK configuration rc=%d\n", rc);
goto failed_calib;
}
/* disable the module before starting calibration */
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_MODULE_EN_REG(wled->ctrl_base),
QPNP_WLED_MODULE_EN_MASK, 0);
if (rc < 0) {
pr_err("Failed to disable WLED module rc=%d\n", rc);
goto failed_calib;
}
/* set low brightness across all sinks */
rc = qpnp_wled_set_level(wled, AUTO_CALIB_BRIGHTNESS);
if (rc < 0) {
pr_err("Failed to set brightness for calibration rc=%d\n", rc);
goto failed_calib;
}
if (wled->en_cabc) {
for (i = 0; i < wled->max_strings; i++) {
reg = 0;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_CABC_REG(wled->sink_base, i),
QPNP_WLED_CABC_MASK, reg);
if (rc < 0)
goto failed_calib;
}
}
/* disable all sinks */
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_CURR_SINK_REG(wled->sink_base), 0);
if (rc < 0) {
pr_err("Failed to disable all sinks rc=%d\n", rc);
goto failed_calib;
}
/* iterate through the strings one by one */
for (i = 0; i < wled->max_strings; i++) {
sink_test = 1 << (QPNP_WLED_CURR_SINK_SHIFT + i);
/* Enable feedback control */
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_FDBK_OP_REG(wled->ctrl_base),
i + 1);
if (rc < 0) {
pr_err("Failed to enable feedback for SINK %d rc = %d\n",
i + 1, rc);
goto failed_calib;
}
/* enable the sink */
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_CURR_SINK_REG(wled->sink_base), sink_test);
if (rc < 0) {
pr_err("Failed to configure SINK %d rc=%d\n",
i + 1, rc);
goto failed_calib;
}
/* Enable the module */
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_MODULE_EN_REG(wled->ctrl_base),
QPNP_WLED_MODULE_EN_MASK, QPNP_WLED_MODULE_EN_MASK);
if (rc < 0) {
pr_err("Failed to enable WLED module rc=%d\n", rc);
goto failed_calib;
}
/* delay for WLED soft-start */
usleep_range(QPNP_WLED_SOFT_START_DLY_US,
QPNP_WLED_SOFT_START_DLY_US + 1000);
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_INT_RT_STS(wled->ctrl_base), &int_sts);
if (rc < 0) {
pr_err("Error in reading WLED_INT_RT_STS rc=%d\n", rc);
goto failed_calib;
}
if (int_sts & QPNP_WLED_OVP_FAULT_BIT)
pr_debug("WLED OVP fault detected with SINK %d\n",
i + 1);
else
sink_valid |= sink_test;
/* Disable the module */
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_MODULE_EN_REG(wled->ctrl_base),
QPNP_WLED_MODULE_EN_MASK, 0);
if (rc < 0) {
pr_err("Failed to disable WLED module rc=%d\n", rc);
goto failed_calib;
}
}
if (sink_valid == sink_config) {
pr_debug("WLED auto-calibration complete, default sink-config=%x OK!\n",
sink_config);
} else {
pr_warn("Invalid WLED default sink config=%x changing it to=%x\n",
sink_config, sink_valid);
sink_config = sink_valid;
}
if (!sink_config) {
pr_warn("No valid WLED sinks found\n");
wled->module_dis_perm = true;
goto failed_calib;
}
/* write the new sink configuration */
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_CURR_SINK_REG(wled->sink_base), sink_config);
if (rc < 0) {
pr_err("Failed to reconfigure the default sink rc=%d\n", rc);
goto failed_calib;
}
/* MODULATOR_EN setting for valid sinks */
for (i = 0; i < wled->max_strings; i++) {
if (wled->en_cabc) {
reg = 1 << QPNP_WLED_CABC_SHIFT;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_CABC_REG(wled->sink_base, i),
QPNP_WLED_CABC_MASK, reg);
if (rc < 0)
goto failed_calib;
}
if (sink_config & (1 << (QPNP_WLED_CURR_SINK_SHIFT + i)))
reg = (QPNP_WLED_MOD_EN << QPNP_WLED_MOD_EN_SHFT);
else
reg = 0x0; /* disable modulator_en for unused sink */
if (wled->dim_mode == QPNP_WLED_DIM_HYBRID)
reg &= QPNP_WLED_GATE_DRV_MASK;
else
reg |= ~QPNP_WLED_GATE_DRV_MASK;
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_MOD_EN_REG(wled->sink_base, i), reg);
if (rc < 0) {
pr_err("Failed to configure MODULATOR_EN rc=%d\n", rc);
goto failed_calib;
}
}
/* restore the feedback setting */
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_FDBK_OP_REG(wled->ctrl_base),
wled->fdbk_op);
if (rc < 0) {
pr_err("Failed to restore feedback setting rc=%d\n", rc);
goto failed_calib;
}
/* restore brightness */
rc = qpnp_wled_set_level(wled, !wled->cdev.brightness ?
AUTO_CALIB_BRIGHTNESS : wled->cdev.brightness);
if (rc < 0) {
pr_err("Failed to set brightness after calibration rc=%d\n",
rc);
goto failed_calib;
}
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_MODULE_EN_REG(wled->ctrl_base),
QPNP_WLED_MODULE_EN_MASK,
QPNP_WLED_MODULE_EN_MASK);
if (rc < 0) {
pr_err("Failed to enable WLED module rc=%d\n", rc);
goto failed_calib;
}
/* delay for WLED soft-start */
usleep_range(QPNP_WLED_SOFT_START_DLY_US,
QPNP_WLED_SOFT_START_DLY_US + 1000);
failed_calib:
return rc;
}
#define WLED_AUTO_CAL_OVP_COUNT 5
#define WLED_AUTO_CAL_CNT_DLY_US 1000000 /* 1 second */
static bool qpnp_wled_auto_cal_required(struct qpnp_wled *wled)
{
s64 elapsed_time_us;
/*
* Check if the OVP fault was an occasional one
* or if its firing continuously, the latter qualifies
* for an auto-calibration check.
*/
if (!wled->auto_calibration_ovp_count) {
wled->start_ovp_fault_time = ktime_get();
wled->auto_calibration_ovp_count++;
} else {
elapsed_time_us = ktime_us_delta(ktime_get(),
wled->start_ovp_fault_time);
if (elapsed_time_us > WLED_AUTO_CAL_CNT_DLY_US)
wled->auto_calibration_ovp_count = 0;
else
wled->auto_calibration_ovp_count++;
if (wled->auto_calibration_ovp_count >=
WLED_AUTO_CAL_OVP_COUNT) {
wled->auto_calibration_ovp_count = 0;
return true;
}
}
return false;
}
static int qpnp_wled_auto_calibrate_at_init(struct qpnp_wled *wled)
{
int rc;
u8 fault_status = 0, rt_status = 0;
if (!wled->auto_calib_enabled)
return 0;
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_INT_RT_STS(wled->ctrl_base), &rt_status);
if (rc < 0)
pr_err("Failed to read RT status rc=%d\n", rc);
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_FAULT_STATUS(wled->ctrl_base), &fault_status);
if (rc < 0)
pr_err("Failed to read fault status rc=%d\n", rc);
if ((rt_status & QPNP_WLED_OVP_FLT_RT_STS_BIT) ||
(fault_status & QPNP_WLED_OVP_FAULT_BIT)) {
mutex_lock(&wled->lock);
rc = wled_auto_calibrate(wled);
if (rc < 0)
pr_err("Failed auto-calibration rc=%d\n", rc);
else
wled->auto_calib_done = true;
mutex_unlock(&wled->lock);
}
return rc;
}
/* ovp irq handler */
static irqreturn_t qpnp_wled_ovp_irq_handler(int irq, void *_wled)
{
struct qpnp_wled *wled = _wled;
int rc;
u8 fault_sts, int_sts;
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_INT_RT_STS(wled->ctrl_base), &int_sts);
if (rc < 0) {
pr_err("Error in reading WLED_INT_RT_STS rc=%d\n", rc);
return IRQ_HANDLED;
}
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_FAULT_STATUS(wled->ctrl_base), &fault_sts);
if (rc < 0) {
pr_err("Error in reading WLED_FAULT_STATUS rc=%d\n", rc);
return IRQ_HANDLED;
}
if (fault_sts & (QPNP_WLED_OVP_FAULT_BIT | QPNP_WLED_ILIM_FAULT_BIT))
pr_err("WLED OVP fault detected, int_sts=%x fault_sts= %x\n",
int_sts, fault_sts);
if (fault_sts & QPNP_WLED_OVP_FAULT_BIT) {
if (wled->auto_calib_enabled && !wled->auto_calib_done) {
if (qpnp_wled_auto_cal_required(wled)) {
mutex_lock(&wled->lock);
if (wled->ovp_irq > 0 &&
!wled->ovp_irq_disabled) {
disable_irq_nosync(wled->ovp_irq);
wled->ovp_irq_disabled = true;
}
rc = wled_auto_calibrate(wled);
if (rc < 0)
pr_err("Failed auto-calibration rc=%d\n",
rc);
else
wled->auto_calib_done = true;
if (wled->ovp_irq > 0 &&
wled->ovp_irq_disabled) {
enable_irq(wled->ovp_irq);
wled->ovp_irq_disabled = false;
}
mutex_unlock(&wled->lock);
}
}
}
return IRQ_HANDLED;
}
/* short circuit irq handler */
static irqreturn_t qpnp_wled_sc_irq_handler(int irq, void *_wled)
{
struct qpnp_wled *wled = _wled;
int rc;
u8 val;
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_FAULT_STATUS(wled->ctrl_base), &val);
if (rc < 0) {
pr_err("Error in reading WLED_FAULT_STATUS rc=%d\n", rc);
return IRQ_HANDLED;
}
pr_err("WLED short circuit detected %d times fault_status=%x\n",
++wled->sc_cnt, val);
mutex_lock(&wled->lock);
qpnp_wled_module_en(wled, wled->ctrl_base, false);
msleep(QPNP_WLED_SC_DLY_MS);
qpnp_wled_module_en(wled, wled->ctrl_base, true);
mutex_unlock(&wled->lock);
return IRQ_HANDLED;
}
static bool is_avdd_trim_adjustment_required(struct qpnp_wled *wled)
{
int rc;
u8 reg = 0;
/*
* AVDD trim adjustment is not required for pmi8998/pm660l and not
* supported for pmi8994.
*/
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PMI8994_SUBTYPE)
return false;
/*
* Configure TRIM_REG only if disp_type_amoled and it has
* not already been programmed by bootloader.
*/
if (!wled->disp_type_amoled)
return false;
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_CTRL_SPARE_REG(wled->ctrl_base), &reg);
if (rc < 0)
return false;
return !(reg & QPNP_WLED_AVDD_SET_BIT);
}
static int qpnp_wled_gm_config(struct qpnp_wled *wled)
{
int rc;
u8 mask = 0, reg = 0;
/* Configure the LOOP COMP GM register */
if ((wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE)) {
if (wled->disp_type_amoled) {
reg = 0;
mask |= QPNP_WLED_VLOOP_COMP_AUTO_GM_EN |
QPNP_WLED_VLOOP_COMP_AUTO_GM_THRESH_MASK;
} else {
if (wled->loop_auto_gm_en)
reg |= QPNP_WLED_VLOOP_COMP_AUTO_GM_EN;
if (wled->loop_auto_gm_thresh >
QPNP_WLED_LOOP_AUTO_GM_THRESH_MAX)
wled->loop_auto_gm_thresh =
QPNP_WLED_LOOP_AUTO_GM_THRESH_MAX;
reg |= wled->loop_auto_gm_thresh <<
QPNP_WLED_VLOOP_COMP_AUTO_GM_THRESH_SHIFT;
mask |= QPNP_WLED_VLOOP_COMP_AUTO_GM_EN |
QPNP_WLED_VLOOP_COMP_AUTO_GM_THRESH_MASK;
}
}
if (wled->loop_ea_gm < QPNP_WLED_LOOP_EA_GM_MIN)
wled->loop_ea_gm = QPNP_WLED_LOOP_EA_GM_MIN;
else if (wled->loop_ea_gm > QPNP_WLED_LOOP_EA_GM_MAX)
wled->loop_ea_gm = QPNP_WLED_LOOP_EA_GM_MAX;
reg |= wled->loop_ea_gm | QPNP_WLED_VLOOP_COMP_GM_OVERWRITE;
mask |= QPNP_WLED_VLOOP_COMP_GM_MASK |
QPNP_WLED_VLOOP_COMP_GM_OVERWRITE;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_VLOOP_COMP_GM_REG(wled->ctrl_base), mask,
reg);
if (rc)
pr_err("write VLOOP_COMP_GM_REG failed, rc=%d]\n", rc);
return rc;
}
static int qpnp_wled_ovp_config(struct qpnp_wled *wled)
{
int rc, i, *ovp_table;
u8 reg;
/*
* Configure the OVP register based on ovp_mv only if display type is
* not AMOLED.
*/
if (wled->disp_type_amoled)
return 0;
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE)
ovp_table = qpnp_wled_ovp_thresholds_pmi8998;
else
ovp_table = qpnp_wled_ovp_thresholds_pmi8994;
for (i = 0; i < NUM_SUPPORTED_OVP_THRESHOLDS; i++) {
if (wled->ovp_mv == ovp_table[i])
break;
}
if (i == NUM_SUPPORTED_OVP_THRESHOLDS) {
dev_err(&wled->pdev->dev,
"Invalid ovp threshold specified in device tree\n");
return -EINVAL;
}
reg = i & QPNP_WLED_OVP_MASK;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_OVP_REG(wled->ctrl_base),
QPNP_WLED_OVP_MASK, reg);
if (rc)
return rc;
return 0;
}
static int qpnp_wled_avdd_trim_config(struct qpnp_wled *wled)
{
int rc, i;
u8 reg;
for (i = 0; i < NUM_SUPPORTED_AVDD_VOLTAGES; i++) {
if (wled->avdd_target_voltage_mv ==
qpnp_wled_avdd_target_voltages[i])
break;
}
if (i == NUM_SUPPORTED_AVDD_VOLTAGES) {
dev_err(&wled->pdev->dev,
"Invalid avdd target voltage specified in device tree\n");
return -EINVAL;
}
/* Update WLED_OVP register based on desired target voltage */
reg = qpnp_wled_ovp_reg_settings[i];
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_OVP_REG(wled->ctrl_base),
QPNP_WLED_OVP_MASK, reg);
if (rc)
return rc;
/* Update WLED_TRIM register based on desired target voltage */
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_REF_7P7_TRIM_REG(wled->ctrl_base), &reg);
if (rc)
return rc;
reg += qpnp_wled_avdd_trim_adjustments[i];
if ((s8)reg < QPNP_WLED_AVDD_MIN_TRIM_VAL ||
(s8)reg > QPNP_WLED_AVDD_MAX_TRIM_VAL) {
dev_dbg(&wled->pdev->dev,
"adjusted trim %d is not within range, capping it\n",
(s8)reg);
if ((s8)reg < QPNP_WLED_AVDD_MIN_TRIM_VAL)
reg = QPNP_WLED_AVDD_MIN_TRIM_VAL;
else
reg = QPNP_WLED_AVDD_MAX_TRIM_VAL;
}
reg &= QPNP_WLED_7P7_TRIM_MASK;
rc = qpnp_wled_sec_write_reg(wled,
QPNP_WLED_REF_7P7_TRIM_REG(wled->ctrl_base), reg);
if (rc < 0)
dev_err(&wled->pdev->dev, "Write to 7P7_TRIM register failed, rc=%d\n",
rc);
return rc;
}
static int qpnp_wled_avdd_mode_config(struct qpnp_wled *wled)
{
int rc;
u8 reg = 0;
/*
* At present, configuring the mode to SPMI/SWIRE for controlling
* AVDD voltage is available only in pmi8998/pm660l.
*/
if (wled->pmic_rev_id->pmic_subtype != PMI8998_SUBTYPE &&
wled->pmic_rev_id->pmic_subtype != PM660L_SUBTYPE)
return 0;
/* AMOLED_VOUT should be configured for AMOLED */
if (!wled->disp_type_amoled)
return 0;
/* Configure avdd register */
if (wled->avdd_target_voltage_mv > QPNP_WLED_AVDD_MAX_MV) {
dev_dbg(&wled->pdev->dev, "Capping avdd target voltage to %d\n",
QPNP_WLED_AVDD_MAX_MV);
wled->avdd_target_voltage_mv = QPNP_WLED_AVDD_MAX_MV;
} else if (wled->avdd_target_voltage_mv < QPNP_WLED_AVDD_MIN_MV) {
dev_info(&wled->pdev->dev, "Capping avdd target voltage to %d\n",
QPNP_WLED_AVDD_MIN_MV);
wled->avdd_target_voltage_mv = QPNP_WLED_AVDD_MIN_MV;
}
if (wled->avdd_mode_spmi) {
reg = QPNP_WLED_AVDD_MV_TO_REG(wled->avdd_target_voltage_mv);
reg |= QPNP_WLED_AVDD_SEL_SPMI_BIT;
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_AMOLED_VOUT_REG(wled->ctrl_base),
reg);
if (rc < 0)
pr_err("Write to AMOLED_VOUT register failed, rc=%d\n",
rc);
} else {
rc = qpnp_wled_swire_avdd_config(wled);
if (rc < 0)
pr_err("Write to SWIRE_AVDD_DEFAULT register failed rc:%d\n",
rc);
}
return rc;
}
static int qpnp_wled_ilim_config(struct qpnp_wled *wled)
{
int rc, i, *ilim_table;
u8 reg;
if (wled->ilim_ma < PMI8994_WLED_ILIM_MIN_MA)
wled->ilim_ma = PMI8994_WLED_ILIM_MIN_MA;
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE) {
ilim_table = qpnp_wled_ilim_settings_pmi8998;
if (wled->ilim_ma > PMI8998_WLED_ILIM_MAX_MA)
wled->ilim_ma = PMI8998_WLED_ILIM_MAX_MA;
} else {
ilim_table = qpnp_wled_ilim_settings_pmi8994;
if (wled->ilim_ma > PMI8994_WLED_ILIM_MAX_MA)
wled->ilim_ma = PMI8994_WLED_ILIM_MAX_MA;
}
for (i = 0; i < NUM_SUPPORTED_ILIM_THRESHOLDS; i++) {
if (wled->ilim_ma == ilim_table[i])
break;
}
if (i == NUM_SUPPORTED_ILIM_THRESHOLDS) {
dev_err(&wled->pdev->dev,
"Invalid ilim threshold specified in device tree\n");
return -EINVAL;
}
reg = (i & QPNP_WLED_ILIM_MASK) | QPNP_WLED_ILIM_OVERWRITE;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_ILIM_REG(wled->ctrl_base),
QPNP_WLED_ILIM_MASK | QPNP_WLED_ILIM_OVERWRITE, reg);
if (rc < 0)
dev_err(&wled->pdev->dev, "Write to ILIM register failed, rc=%d\n",
rc);
return rc;
}
static int qpnp_wled_vref_config(struct qpnp_wled *wled)
{
struct wled_vref_setting vref_setting;
int rc;
u8 reg = 0;
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE)
vref_setting = vref_setting_pmi8998;
else
vref_setting = vref_setting_pmi8994;
if (wled->vref_uv < vref_setting.min_uv)
wled->vref_uv = vref_setting.min_uv;
else if (wled->vref_uv > vref_setting.max_uv)
wled->vref_uv = vref_setting.max_uv;
reg |= DIV_ROUND_CLOSEST(wled->vref_uv - vref_setting.min_uv,
vref_setting.step_uv);
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_VREF_REG(wled->ctrl_base),
QPNP_WLED_VREF_MASK, reg);
if (rc)
pr_err("Write VREF_REG failed, rc=%d\n", rc);
return rc;
}
/* Configure WLED registers */
static int qpnp_wled_config(struct qpnp_wled *wled)
{
int rc, i, temp;
u8 reg = 0, sink_en = 0, mask;
/* Configure display type */
rc = qpnp_wled_set_disp(wled, wled->ctrl_base);
if (rc < 0)
return rc;
/* Configure the FEEDBACK OUTPUT register */
rc = qpnp_wled_read_reg(wled, QPNP_WLED_FDBK_OP_REG(wled->ctrl_base),
&reg);
if (rc < 0)
return rc;
reg &= QPNP_WLED_FDBK_OP_MASK;
reg |= wled->fdbk_op;
rc = qpnp_wled_write_reg(wled, QPNP_WLED_FDBK_OP_REG(wled->ctrl_base),
reg);
if (rc)
return rc;
/* Configure the VREF register */
rc = qpnp_wled_vref_config(wled);
if (rc < 0) {
pr_err("Error in configuring wled vref, rc=%d\n", rc);
return rc;
}
/* Configure VLOOP_COMP_GM register */
rc = qpnp_wled_gm_config(wled);
if (rc < 0) {
pr_err("Error in configureing wled gm, rc=%d\n", rc);
return rc;
}
/* Configure the ILIM register */
rc = qpnp_wled_ilim_config(wled);
if (rc < 0) {
pr_err("Error in configuring wled ilim, rc=%d\n", rc);
return rc;
}
/* Configure auto PFM mode for LCD mode only */
if ((wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE)
&& !wled->disp_type_amoled) {
reg = 0;
reg |= wled->lcd_auto_pfm_thresh;
reg |= wled->lcd_auto_pfm_en <<
QPNP_WLED_LCD_AUTO_PFM_EN_SHIFT;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_LCD_AUTO_PFM_REG(wled->ctrl_base),
QPNP_WLED_LCD_AUTO_PFM_EN_BIT |
QPNP_WLED_LCD_AUTO_PFM_THRESH_MASK, reg);
if (rc < 0) {
pr_err("Write LCD_AUTO_PFM failed, rc=%d\n", rc);
return rc;
}
}
/* Configure the Soft start Ramp delay: for AMOLED - 0,for LCD - 2 */
reg = (wled->disp_type_amoled) ? 0 : 2;
mask = SOFTSTART_RAMP_DELAY_MASK;
if ((wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE)
&& wled->disp_type_amoled) {
reg |= SOFTSTART_OVERWRITE_BIT;
mask |= SOFTSTART_OVERWRITE_BIT;
}
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_SOFTSTART_RAMP_DLY(wled->ctrl_base),
mask, reg);
if (rc)
return rc;
/* Configure the MAX BOOST DUTY register */
if (wled->boost_duty_ns < QPNP_WLED_BOOST_DUTY_MIN_NS)
wled->boost_duty_ns = QPNP_WLED_BOOST_DUTY_MIN_NS;
else if (wled->boost_duty_ns > QPNP_WLED_BOOST_DUTY_MAX_NS)
wled->boost_duty_ns = QPNP_WLED_BOOST_DUTY_MAX_NS;
rc = qpnp_wled_read_reg(wled, QPNP_WLED_BOOST_DUTY_REG(wled->ctrl_base),
&reg);
if (rc < 0)
return rc;
reg &= QPNP_WLED_BOOST_DUTY_MASK;
reg |= (wled->boost_duty_ns / QPNP_WLED_BOOST_DUTY_STEP_NS);
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_BOOST_DUTY_REG(wled->ctrl_base), reg);
if (rc)
return rc;
/* Configure the SWITCHING FREQ register */
if (wled->switch_freq_khz == 1600)
reg = QPNP_WLED_SWITCH_FREQ_1600_KHZ_CODE;
else
reg = QPNP_WLED_SWITCH_FREQ_800_KHZ_CODE;
/*
* Do not set the overwrite bit when switching frequency is selected
* for AMOLED. This register is in logic reset block which can cause
* the value to be overwritten during module enable/disable.
*/
mask = QPNP_WLED_SWITCH_FREQ_MASK | QPNP_WLED_SWITCH_FREQ_OVERWRITE;
if (!wled->disp_type_amoled)
reg |= QPNP_WLED_SWITCH_FREQ_OVERWRITE;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_SWITCH_FREQ_REG(wled->ctrl_base), mask, reg);
if (rc < 0)
return rc;
rc = qpnp_wled_ovp_config(wled);
if (rc < 0) {
pr_err("Error in configuring OVP threshold, rc=%d\n", rc);
return rc;
}
if (is_avdd_trim_adjustment_required(wled)) {
rc = qpnp_wled_avdd_trim_config(wled);
if (rc < 0)
return rc;
}
rc = qpnp_wled_avdd_mode_config(wled);
if (rc < 0)
return rc;
/* Configure the MODULATION register */
if (wled->mod_freq_khz <= QPNP_WLED_MOD_FREQ_1200_KHZ) {
wled->mod_freq_khz = QPNP_WLED_MOD_FREQ_1200_KHZ;
temp = 3;
} else if (wled->mod_freq_khz <= QPNP_WLED_MOD_FREQ_2400_KHZ) {
wled->mod_freq_khz = QPNP_WLED_MOD_FREQ_2400_KHZ;
temp = 2;
} else if (wled->mod_freq_khz <= QPNP_WLED_MOD_FREQ_9600_KHZ) {
wled->mod_freq_khz = QPNP_WLED_MOD_FREQ_9600_KHZ;
temp = 1;
} else if (wled->mod_freq_khz <= QPNP_WLED_MOD_FREQ_19200_KHZ) {
wled->mod_freq_khz = QPNP_WLED_MOD_FREQ_19200_KHZ;
temp = 0;
} else {
wled->mod_freq_khz = QPNP_WLED_MOD_FREQ_9600_KHZ;
temp = 1;
}
rc = qpnp_wled_read_reg(wled, QPNP_WLED_MOD_REG(wled->sink_base), &reg);
if (rc < 0)
return rc;
reg &= QPNP_WLED_MOD_FREQ_MASK;
reg |= (temp << QPNP_WLED_MOD_FREQ_SHIFT);
reg &= QPNP_WLED_PHASE_STAG_MASK;
reg |= (wled->en_phase_stag << QPNP_WLED_PHASE_STAG_SHIFT);
reg &= QPNP_WLED_ACC_CLK_FREQ_MASK;
reg |= (temp << QPNP_WLED_ACC_CLK_FREQ_SHIFT);
reg &= QPNP_WLED_DIM_RES_MASK;
reg |= (wled->en_9b_dim_res << QPNP_WLED_DIM_RES_SHIFT);
if (wled->dim_mode == QPNP_WLED_DIM_HYBRID) {
reg &= QPNP_WLED_DIM_HYB_MASK;
reg |= (1 << QPNP_WLED_DIM_HYB_SHIFT);
} else {
reg &= QPNP_WLED_DIM_HYB_MASK;
reg |= (0 << QPNP_WLED_DIM_HYB_SHIFT);
reg &= QPNP_WLED_DIM_ANA_MASK;
reg |= wled->dim_mode;
}
rc = qpnp_wled_write_reg(wled, QPNP_WLED_MOD_REG(wled->sink_base), reg);
if (rc)
return rc;
/* Configure the HYBRID THRESHOLD register */
if (wled->dim_mode == QPNP_WLED_DIM_HYBRID) {
if (wled->hyb_thres < QPNP_WLED_HYB_THRES_MIN)
wled->hyb_thres = QPNP_WLED_HYB_THRES_MIN;
else if (wled->hyb_thres > QPNP_WLED_HYB_THRES_MAX)
wled->hyb_thres = QPNP_WLED_HYB_THRES_MAX;
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_HYB_THRES_REG(wled->sink_base),
&reg);
if (rc < 0)
return rc;
reg &= QPNP_WLED_HYB_THRES_MASK;
temp = fls(wled->hyb_thres / QPNP_WLED_HYB_THRES_MIN) - 1;
reg |= temp;
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_HYB_THRES_REG(wled->sink_base),
reg);
if (rc)
return rc;
}
/* Configure TEST5 register */
if (wled->dim_mode == QPNP_WLED_DIM_DIGITAL) {
reg = QPNP_WLED_SINK_TEST5_DIG;
} else {
reg = QPNP_WLED_SINK_TEST5_HYB;
if (wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE)
reg |= QPNP_WLED_SINK_TEST5_HVG_PULL_STR_BIT;
}
rc = qpnp_wled_sec_write_reg(wled,
QPNP_WLED_SINK_TEST5_REG(wled->sink_base), reg);
if (rc)
return rc;
/* disable all current sinks and enable selected strings */
reg = 0x00;
rc = qpnp_wled_write_reg(wled, QPNP_WLED_CURR_SINK_REG(wled->sink_base),
reg);
for (i = 0; i < wled->max_strings; i++) {
/* SYNC DELAY */
if (wled->sync_dly_us > QPNP_WLED_SYNC_DLY_MAX_US)
wled->sync_dly_us = QPNP_WLED_SYNC_DLY_MAX_US;
reg = wled->sync_dly_us / QPNP_WLED_SYNC_DLY_STEP_US;
mask = QPNP_WLED_SYNC_DLY_MASK;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_SYNC_DLY_REG(wled->sink_base, i),
mask, reg);
if (rc < 0)
return rc;
/* FULL SCALE CURRENT */
if (wled->fs_curr_ua > QPNP_WLED_FS_CURR_MAX_UA)
wled->fs_curr_ua = QPNP_WLED_FS_CURR_MAX_UA;
reg = wled->fs_curr_ua / QPNP_WLED_FS_CURR_STEP_UA;
mask = QPNP_WLED_FS_CURR_MASK;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_FS_CURR_REG(wled->sink_base, i),
mask, reg);
if (rc < 0)
return rc;
/* CABC */
reg = wled->en_cabc ? (1 << QPNP_WLED_CABC_SHIFT) : 0;
mask = QPNP_WLED_CABC_MASK;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_CABC_REG(wled->sink_base, i),
mask, reg);
if (rc < 0)
return rc;
}
/* Settings specific to valid sinks */
for (i = 0; i < wled->num_strings; i++) {
if (wled->strings[i] >= wled->max_strings) {
dev_err(&wled->pdev->dev, "Invalid string number\n");
return -EINVAL;
}
/* MODULATOR */
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_MOD_EN_REG(wled->sink_base, i), &reg);
if (rc < 0)
return rc;
reg &= QPNP_WLED_MOD_EN_MASK;
reg |= (QPNP_WLED_MOD_EN << QPNP_WLED_MOD_EN_SHFT);
if (wled->dim_mode == QPNP_WLED_DIM_HYBRID)
reg &= QPNP_WLED_GATE_DRV_MASK;
else
reg |= ~QPNP_WLED_GATE_DRV_MASK;
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_MOD_EN_REG(wled->sink_base, i), reg);
if (rc)
return rc;
/* SINK EN */
temp = wled->strings[i] + QPNP_WLED_CURR_SINK_SHIFT;
sink_en |= (1 << temp);
}
mask = QPNP_WLED_CURR_SINK_MASK;
rc = qpnp_wled_masked_write_reg(wled,
QPNP_WLED_CURR_SINK_REG(wled->sink_base),
mask, sink_en);
if (rc < 0) {
dev_err(&wled->pdev->dev,
"Failed to enable WLED sink config rc = %d\n", rc);
return rc;
}
rc = qpnp_wled_sync_reg_toggle(wled);
if (rc < 0) {
dev_err(&wled->pdev->dev, "Failed to toggle sync reg %d\n", rc);
return rc;
}
rc = qpnp_wled_auto_calibrate_at_init(wled);
if (rc < 0)
pr_err("Failed to auto-calibrate at init rc=%d\n", rc);
/* setup ovp and sc irqs */
if (wled->ovp_irq >= 0) {
irq_set_status_flags(wled->ovp_irq, IRQ_DISABLE_UNLAZY);
rc = devm_request_threaded_irq(&wled->pdev->dev, wled->ovp_irq,
NULL, qpnp_wled_ovp_irq_handler, IRQF_ONESHOT,
"qpnp_wled_ovp_irq", wled);
if (rc < 0) {
dev_err(&wled->pdev->dev,
"Unable to request ovp(%d) IRQ(err:%d)\n",
wled->ovp_irq, rc);
return rc;
}
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_MODULE_EN_REG(wled->ctrl_base), &reg);
/* disable the OVP irq only if the module is not enabled */
if (!rc && !(reg & QPNP_WLED_MODULE_EN_MASK)) {
disable_irq(wled->ovp_irq);
wled->ovp_irq_disabled = true;
}
}
if (wled->sc_irq >= 0) {
wled->sc_cnt = 0;
irq_set_status_flags(wled->sc_irq, IRQ_DISABLE_UNLAZY);
rc = devm_request_threaded_irq(&wled->pdev->dev, wled->sc_irq,
NULL, qpnp_wled_sc_irq_handler, IRQF_ONESHOT,
"qpnp_wled_sc_irq", wled);
if (rc < 0) {
dev_err(&wled->pdev->dev,
"Unable to request sc(%d) IRQ(err:%d)\n",
wled->sc_irq, rc);
return rc;
}
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_SC_PRO_REG(wled->ctrl_base), &reg);
if (rc < 0)
return rc;
reg &= QPNP_WLED_EN_SC_DEB_CYCLES_MASK;
reg |= 1 << QPNP_WLED_EN_SC_SHIFT;
if (wled->sc_deb_cycles < QPNP_WLED_SC_DEB_CYCLES_MIN)
wled->sc_deb_cycles = QPNP_WLED_SC_DEB_CYCLES_MIN;
else if (wled->sc_deb_cycles > QPNP_WLED_SC_DEB_CYCLES_MAX)
wled->sc_deb_cycles = QPNP_WLED_SC_DEB_CYCLES_MAX;
temp = fls(wled->sc_deb_cycles) - QPNP_WLED_SC_DEB_CYCLES_SUB;
reg |= (temp << 1);
if (wled->disp_type_amoled)
reg |= QPNP_WLED_SC_PRO_EN_DSCHGR;
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_SC_PRO_REG(wled->ctrl_base), reg);
if (rc)
return rc;
if (wled->en_ext_pfet_sc_pro) {
if (!(wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE
&& wled->pmic_rev_id->rev4 ==
PMI8998_V2P0_REV4)) {
reg = QPNP_WLED_EXT_FET_DTEST2;
rc = qpnp_wled_sec_write_reg(wled,
QPNP_WLED_TEST1_REG(wled->ctrl_base),
reg);
if (rc)
return rc;
}
}
} else {
rc = qpnp_wled_read_reg(wled,
QPNP_WLED_SC_PRO_REG(wled->ctrl_base), &reg);
if (rc < 0)
return rc;
reg &= QPNP_WLED_EN_DEB_CYCLES_MASK;
if (wled->sc_deb_cycles < QPNP_WLED_SC_DEB_CYCLES_MIN)
wled->sc_deb_cycles = QPNP_WLED_SC_DEB_CYCLES_MIN;
else if (wled->sc_deb_cycles > QPNP_WLED_SC_DEB_CYCLES_MAX)
wled->sc_deb_cycles = QPNP_WLED_SC_DEB_CYCLES_MAX;
temp = fls(wled->sc_deb_cycles) - QPNP_WLED_SC_DEB_CYCLES_SUB;
reg |= (temp << 1);
rc = qpnp_wled_write_reg(wled,
QPNP_WLED_SC_PRO_REG(wled->ctrl_base), reg);
if (rc)
return rc;
}
return 0;
}
/* parse wled dtsi parameters */
static int qpnp_wled_parse_dt(struct qpnp_wled *wled)
{
struct platform_device *pdev = wled->pdev;
struct property *prop;
const char *temp_str;
u32 temp_val;
int rc, i, size;
u8 *strings;
wled->cdev.name = "wled";
rc = of_property_read_string(pdev->dev.of_node,
"linux,name", &wled->cdev.name);
if (rc && (rc != -EINVAL)) {
dev_err(&pdev->dev, "Unable to read led name\n");
return rc;
}
wled->cdev.default_trigger = QPNP_WLED_TRIGGER_NONE;
rc = of_property_read_string(pdev->dev.of_node, "linux,default-trigger",
&wled->cdev.default_trigger);
if (rc && (rc != -EINVAL)) {
dev_err(&pdev->dev, "Unable to read led trigger\n");
return rc;
}
if (of_find_property(pdev->dev.of_node, "qcom,wled-brightness-map",
NULL)) {
size = of_property_count_elems_of_size(pdev->dev.of_node,
"qcom,wled-brightness-map", sizeof(u16));
if (size != NUM_DDIC_CODES) {
pr_err("Invalid WLED brightness map size:%d\n", size);
return rc;
}
wled->brt_map_table = devm_kcalloc(&pdev->dev, NUM_DDIC_CODES,
sizeof(u16), GFP_KERNEL);
if (!wled->brt_map_table)
return -ENOMEM;
rc = of_property_read_u16_array(pdev->dev.of_node,
"qcom,wled-brightness-map", wled->brt_map_table,
NUM_DDIC_CODES);
if (rc < 0) {
pr_err("Error in reading WLED brightness map, rc=%d\n",
rc);
return rc;
}
for (i = 0; i < NUM_DDIC_CODES; i++) {
if (wled->brt_map_table[i] > WLED_MAX_LEVEL_4095) {
pr_err("WLED brightness map not in range\n");
return -EDOM;
}
if ((i > 1) && wled->brt_map_table[i]
< wled->brt_map_table[i - 1]) {
pr_err("WLED brightness map not in ascending order?\n");
return -EDOM;
}
}
}
wled->stepper_en = of_property_read_bool(pdev->dev.of_node,
"qcom,wled-stepper-en");
wled->disp_type_amoled = of_property_read_bool(pdev->dev.of_node,
"qcom,disp-type-amoled");
if (wled->disp_type_amoled) {
wled->vref_psm_mv = QPNP_WLED_VREF_PSM_DFLT_AMOLED_MV;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,vref-psm-mv", &temp_val);
if (!rc) {
wled->vref_psm_mv = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read vref-psm\n");
return rc;
}
wled->loop_comp_res_kohm = 320;
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE)
wled->loop_comp_res_kohm = 300;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,loop-comp-res-kohm", &temp_val);
if (!rc) {
wled->loop_comp_res_kohm = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read loop-comp-res-kohm\n");
return rc;
}
wled->avdd_mode_spmi = of_property_read_bool(pdev->dev.of_node,
"qcom,avdd-mode-spmi");
wled->avdd_target_voltage_mv = QPNP_WLED_DFLT_AVDD_MV;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,avdd-target-voltage-mv", &temp_val);
if (!rc) {
wled->avdd_target_voltage_mv = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read avdd target voltage\n");
return rc;
}
}
if (wled->disp_type_amoled) {
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE)
wled->loop_ea_gm =
QPNP_WLED_LOOP_GM_DFLT_AMOLED_PMI8998;
else
wled->loop_ea_gm =
QPNP_WLED_LOOP_EA_GM_DFLT_AMOLED_PMI8994;
} else {
wled->loop_ea_gm = QPNP_WLED_LOOP_GM_DFLT_WLED;
}
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,loop-ea-gm", &temp_val);
if (!rc) {
wled->loop_ea_gm = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read loop-ea-gm\n");
return rc;
}
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE) {
wled->loop_auto_gm_en =
of_property_read_bool(pdev->dev.of_node,
"qcom,loop-auto-gm-en");
wled->loop_auto_gm_thresh = QPNP_WLED_LOOP_AUTO_GM_DFLT_THRESH;
rc = of_property_read_u8(pdev->dev.of_node,
"qcom,loop-auto-gm-thresh",
&wled->loop_auto_gm_thresh);
if (rc && rc != -EINVAL) {
dev_err(&pdev->dev,
"Unable to read loop-auto-gm-thresh\n");
return rc;
}
}
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE) {
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE &&
wled->pmic_rev_id->rev4 == PMI8998_V2P0_REV4)
wled->lcd_auto_pfm_en = false;
else
wled->lcd_auto_pfm_en = true;
wled->lcd_auto_pfm_thresh = QPNP_WLED_LCD_AUTO_PFM_DFLT_THRESH;
rc = of_property_read_u8(pdev->dev.of_node,
"qcom,lcd-auto-pfm-thresh",
&wled->lcd_auto_pfm_thresh);
if (rc && rc != -EINVAL) {
dev_err(&pdev->dev,
"Unable to read lcd-auto-pfm-thresh\n");
return rc;
}
if (wled->lcd_auto_pfm_thresh >
QPNP_WLED_LCD_AUTO_PFM_THRESH_MAX)
wled->lcd_auto_pfm_thresh =
QPNP_WLED_LCD_AUTO_PFM_THRESH_MAX;
}
wled->sc_deb_cycles = QPNP_WLED_SC_DEB_CYCLES_DFLT;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,sc-deb-cycles", &temp_val);
if (!rc) {
wled->sc_deb_cycles = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read sc debounce cycles\n");
return rc;
}
wled->fdbk_op = QPNP_WLED_FDBK_AUTO;
rc = of_property_read_string(pdev->dev.of_node,
"qcom,fdbk-output", &temp_str);
if (!rc) {
if (strcmp(temp_str, "wled1") == 0)
wled->fdbk_op = QPNP_WLED_FDBK_WLED1;
else if (strcmp(temp_str, "wled2") == 0)
wled->fdbk_op = QPNP_WLED_FDBK_WLED2;
else if (strcmp(temp_str, "wled3") == 0)
wled->fdbk_op = QPNP_WLED_FDBK_WLED3;
else if (strcmp(temp_str, "wled4") == 0)
wled->fdbk_op = QPNP_WLED_FDBK_WLED4;
else
wled->fdbk_op = QPNP_WLED_FDBK_AUTO;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read feedback output\n");
return rc;
}
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE)
wled->vref_uv = vref_setting_pmi8998.default_uv;
else
wled->vref_uv = vref_setting_pmi8994.default_uv;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,vref-uv", &temp_val);
if (!rc) {
wled->vref_uv = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read vref\n");
return rc;
}
wled->switch_freq_khz = wled->disp_type_amoled ? 1600 : 800;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,switch-freq-khz", &temp_val);
if (!rc) {
wled->switch_freq_khz = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read switch freq\n");
return rc;
}
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE)
wled->ovp_mv = 29600;
else
wled->ovp_mv = 29500;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,ovp-mv", &temp_val);
if (!rc) {
wled->ovp_mv = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read ovp\n");
return rc;
}
if (wled->pmic_rev_id->pmic_subtype == PMI8998_SUBTYPE ||
wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE) {
if (wled->disp_type_amoled)
wled->ilim_ma = PMI8998_AMOLED_DFLT_ILIM_MA;
else
wled->ilim_ma = PMI8998_WLED_DFLT_ILIM_MA;
} else {
if (wled->disp_type_amoled)
wled->ilim_ma = PMI8994_AMOLED_DFLT_ILIM_MA;
else
wled->ilim_ma = PMI8994_WLED_DFLT_ILIM_MA;
}
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,ilim-ma", &temp_val);
if (!rc) {
wled->ilim_ma = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read ilim\n");
return rc;
}
wled->boost_duty_ns = QPNP_WLED_DEF_BOOST_DUTY_NS;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,boost-duty-ns", &temp_val);
if (!rc) {
wled->boost_duty_ns = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read boost duty\n");
return rc;
}
wled->mod_freq_khz = QPNP_WLED_MOD_FREQ_9600_KHZ;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,mod-freq-khz", &temp_val);
if (!rc) {
wled->mod_freq_khz = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read modulation freq\n");
return rc;
}
wled->dim_mode = QPNP_WLED_DIM_HYBRID;
rc = of_property_read_string(pdev->dev.of_node,
"qcom,dim-mode", &temp_str);
if (!rc) {
if (strcmp(temp_str, "analog") == 0)
wled->dim_mode = QPNP_WLED_DIM_ANALOG;
else if (strcmp(temp_str, "digital") == 0)
wled->dim_mode = QPNP_WLED_DIM_DIGITAL;
else
wled->dim_mode = QPNP_WLED_DIM_HYBRID;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read dim mode\n");
return rc;
}
if (wled->dim_mode == QPNP_WLED_DIM_HYBRID) {
wled->hyb_thres = QPNP_WLED_DEF_HYB_THRES;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,hyb-thres", &temp_val);
if (!rc) {
wled->hyb_thres = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read hyb threshold\n");
return rc;
}
}
wled->sync_dly_us = QPNP_WLED_DEF_SYNC_DLY_US;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,sync-dly-us", &temp_val);
if (!rc) {
wled->sync_dly_us = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read sync delay\n");
return rc;
}
wled->fs_curr_ua = QPNP_WLED_FS_CURR_MAX_UA;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,fs-curr-ua", &temp_val);
if (!rc) {
wled->fs_curr_ua = temp_val;
} else if (rc != -EINVAL) {
dev_err(&pdev->dev, "Unable to read full scale current\n");
return rc;
}
wled->cons_sync_write_delay_us = 0;
rc = of_property_read_u32(pdev->dev.of_node,
"qcom,cons-sync-write-delay-us", &temp_val);
if (!rc)
wled->cons_sync_write_delay_us = temp_val;
wled->en_9b_dim_res = of_property_read_bool(pdev->dev.of_node,
"qcom,en-9b-dim-res");
wled->en_phase_stag = of_property_read_bool(pdev->dev.of_node,
"qcom,en-phase-stag");
wled->en_cabc = of_property_read_bool(pdev->dev.of_node,
"qcom,en-cabc");
if (wled->pmic_rev_id->pmic_subtype == PM660L_SUBTYPE)
wled->max_strings = QPNP_PM660_WLED_MAX_STRINGS;
else
wled->max_strings = QPNP_WLED_MAX_STRINGS;
temp_val = 0;
prop = of_find_property(pdev->dev.of_node,
"qcom,led-strings-list", &temp_val);
if (!prop || temp_val > QPNP_WLED_MAX_STRINGS) {
dev_err(&pdev->dev, "Invalid strings info, use default");
wled->num_strings = wled->max_strings;
for (i = 0; i < wled->num_strings; i++)
wled->strings[i] = i;
} else {
wled->num_strings = temp_val;
strings = prop->value;
for (i = 0; i < wled->num_strings; ++i)
wled->strings[i] = strings[i];
}
wled->ovp_irq = platform_get_irq_byname(pdev, "ovp-irq");
if (wled->ovp_irq < 0)
dev_dbg(&pdev->dev, "ovp irq is not used\n");
wled->sc_irq = platform_get_irq_byname(pdev, "sc-irq");
if (wled->sc_irq < 0)
dev_dbg(&pdev->dev, "sc irq is not used\n");
wled->en_ext_pfet_sc_pro = of_property_read_bool(pdev->dev.of_node,
"qcom,en-ext-pfet-sc-pro");
wled->lcd_psm_ctrl = of_property_read_bool(pdev->dev.of_node,
"qcom,lcd-psm-ctrl");
wled->auto_calib_enabled = of_property_read_bool(pdev->dev.of_node,
"qcom,auto-calibration-enable");
return 0;
}
static int qpnp_wled_probe(struct platform_device *pdev)
{
struct qpnp_wled *wled;
struct device_node *revid_node;
int rc = 0, i;
const __be32 *prop;
wled = devm_kzalloc(&pdev->dev, sizeof(*wled), GFP_KERNEL);
if (!wled)
return -ENOMEM;
wled->regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!wled->regmap) {
dev_err(&pdev->dev, "Couldn't get parent's regmap\n");
return -EINVAL;
}
wled->pdev = pdev;
revid_node = of_parse_phandle(pdev->dev.of_node, "qcom,pmic-revid", 0);
if (!revid_node) {
pr_err("Missing qcom,pmic-revid property - driver failed\n");
return -EINVAL;
}
wled->pmic_rev_id = get_revid_data(revid_node);
of_node_put(revid_node);
if (IS_ERR_OR_NULL(wled->pmic_rev_id)) {
pr_err("Unable to get pmic_revid rc=%ld\n",
PTR_ERR(wled->pmic_rev_id));
/*
* the revid peripheral must be registered, any failure
* here only indicates that the rev-id module has not
* probed yet.
*/
return -EPROBE_DEFER;
}
pr_debug("PMIC subtype %d Digital major %d\n",
wled->pmic_rev_id->pmic_subtype, wled->pmic_rev_id->rev4);
wled->wq = alloc_ordered_workqueue("qpnp_wled_wq", WQ_HIGHPRI);
if (!wled->wq) {
pr_err("Unable to alloc workqueue for WLED\n");
return -ENOMEM;
}
prop = of_get_address_by_name(pdev->dev.of_node, QPNP_WLED_SINK_BASE,
NULL, NULL);
if (!prop) {
dev_err(&pdev->dev, "Couldnt find sink's addr rc %d\n", rc);
return rc;
}
wled->sink_base = be32_to_cpu(*prop);
prop = of_get_address_by_name(pdev->dev.of_node, QPNP_WLED_CTRL_BASE,
NULL, NULL);
if (!prop) {
dev_err(&pdev->dev, "Couldnt find ctrl's addr rc = %d\n", rc);
return rc;
}
wled->ctrl_base = be32_to_cpu(*prop);
dev_set_drvdata(&pdev->dev, wled);
rc = qpnp_wled_parse_dt(wled);
if (rc) {
dev_err(&pdev->dev, "DT parsing failed\n");
return rc;
}
mutex_init(&wled->bus_lock);
mutex_init(&wled->lock);
rc = qpnp_wled_config(wled);
if (rc) {
dev_err(&pdev->dev, "wled config failed\n");
return rc;
}
INIT_WORK(&wled->work, qpnp_wled_work);
wled->ramp_ms = QPNP_WLED_RAMP_DLY_MS;
wled->ramp_step = 1;
wled->cdev.brightness_set = qpnp_wled_set;
wled->cdev.brightness_get = qpnp_wled_get;
wled->cdev.max_brightness = WLED_MAX_LEVEL_4095;
rc = led_classdev_register(&pdev->dev, &wled->cdev);
if (rc) {
dev_err(&pdev->dev, "wled registration failed(%d)\n", rc);
goto wled_register_fail;
}
for (i = 0; i < ARRAY_SIZE(qpnp_wled_attrs); i++) {
rc = sysfs_create_file(&wled->cdev.dev->kobj,
&qpnp_wled_attrs[i].attr);
if (rc < 0) {
dev_err(&pdev->dev, "sysfs creation failed\n");
goto sysfs_fail;
}
}
return 0;
sysfs_fail:
for (i--; i >= 0; i--)
sysfs_remove_file(&wled->cdev.dev->kobj,
&qpnp_wled_attrs[i].attr);
led_classdev_unregister(&wled->cdev);
wled_register_fail:
cancel_work_sync(&wled->work);
destroy_workqueue(wled->wq);
mutex_destroy(&wled->lock);
return rc;
}
static int qpnp_wled_remove(struct platform_device *pdev)
{
struct qpnp_wled *wled = dev_get_drvdata(&pdev->dev);
int i;
for (i = 0; i < ARRAY_SIZE(qpnp_wled_attrs); i++)
sysfs_remove_file(&wled->cdev.dev->kobj,
&qpnp_wled_attrs[i].attr);
led_classdev_unregister(&wled->cdev);
cancel_work_sync(&wled->work);
destroy_workqueue(wled->wq);
mutex_destroy(&wled->lock);
return 0;
}
static const struct of_device_id spmi_match_table[] = {
{ .compatible = "qcom,qpnp-wled",},
{ },
};
static struct platform_driver qpnp_wled_driver = {
.driver = {
.name = "qcom,qpnp-wled",
.of_match_table = spmi_match_table,
},
.probe = qpnp_wled_probe,
.remove = qpnp_wled_remove,
};
static int __init qpnp_wled_init(void)
{
return platform_driver_register(&qpnp_wled_driver);
}
subsys_initcall(qpnp_wled_init);
static void __exit qpnp_wled_exit(void)
{
platform_driver_unregister(&qpnp_wled_driver);
}
module_exit(qpnp_wled_exit);
MODULE_DESCRIPTION("QPNP WLED driver");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("leds:leds-qpnp-wled");