| /* |
| * |
| * Support for a cx23417 mpeg encoder via cx23885 host port. |
| * |
| * (c) 2004 Jelle Foks <jelle@foks.8m.com> |
| * (c) 2004 Gerd Knorr <kraxel@bytesex.org> |
| * (c) 2008 Steven Toth <stoth@hauppauge.com> |
| * - CX23885/7/8 support |
| * |
| * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/fs.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/firmware.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-ioctl.h> |
| #include <media/cx2341x.h> |
| |
| #include "cx23885.h" |
| #include "media/cx2341x.h" |
| |
| #define CX23885_FIRM_IMAGE_SIZE 376836 |
| #define CX23885_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw" |
| |
| static unsigned int mpegbufs = 32; |
| module_param(mpegbufs, int, 0644); |
| MODULE_PARM_DESC(mpegbufs, "number of mpeg buffers, range 2-32"); |
| static unsigned int mpeglines = 32; |
| module_param(mpeglines, int, 0644); |
| MODULE_PARM_DESC(mpeglines, "number of lines in an MPEG buffer, range 2-32"); |
| static unsigned int mpeglinesize = 512; |
| module_param(mpeglinesize, int, 0644); |
| MODULE_PARM_DESC(mpeglinesize, |
| "number of bytes in each line of an MPEG buffer, range 512-1024"); |
| |
| static unsigned int v4l_debug; |
| module_param(v4l_debug, int, 0644); |
| MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages"); |
| |
| #define dprintk(level, fmt, arg...)\ |
| do { if (v4l_debug >= level) \ |
| printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\ |
| } while (0) |
| |
| static struct cx23885_tvnorm cx23885_tvnorms[] = { |
| { |
| .name = "NTSC-M", |
| .id = V4L2_STD_NTSC_M, |
| }, { |
| .name = "NTSC-JP", |
| .id = V4L2_STD_NTSC_M_JP, |
| }, { |
| .name = "PAL-BG", |
| .id = V4L2_STD_PAL_BG, |
| }, { |
| .name = "PAL-DK", |
| .id = V4L2_STD_PAL_DK, |
| }, { |
| .name = "PAL-I", |
| .id = V4L2_STD_PAL_I, |
| }, { |
| .name = "PAL-M", |
| .id = V4L2_STD_PAL_M, |
| }, { |
| .name = "PAL-N", |
| .id = V4L2_STD_PAL_N, |
| }, { |
| .name = "PAL-Nc", |
| .id = V4L2_STD_PAL_Nc, |
| }, { |
| .name = "PAL-60", |
| .id = V4L2_STD_PAL_60, |
| }, { |
| .name = "SECAM-L", |
| .id = V4L2_STD_SECAM_L, |
| }, { |
| .name = "SECAM-DK", |
| .id = V4L2_STD_SECAM_DK, |
| } |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| enum cx23885_capture_type { |
| CX23885_MPEG_CAPTURE, |
| CX23885_RAW_CAPTURE, |
| CX23885_RAW_PASSTHRU_CAPTURE |
| }; |
| enum cx23885_capture_bits { |
| CX23885_RAW_BITS_NONE = 0x00, |
| CX23885_RAW_BITS_YUV_CAPTURE = 0x01, |
| CX23885_RAW_BITS_PCM_CAPTURE = 0x02, |
| CX23885_RAW_BITS_VBI_CAPTURE = 0x04, |
| CX23885_RAW_BITS_PASSTHRU_CAPTURE = 0x08, |
| CX23885_RAW_BITS_TO_HOST_CAPTURE = 0x10 |
| }; |
| enum cx23885_capture_end { |
| CX23885_END_AT_GOP, /* stop at the end of gop, generate irq */ |
| CX23885_END_NOW, /* stop immediately, no irq */ |
| }; |
| enum cx23885_framerate { |
| CX23885_FRAMERATE_NTSC_30, /* NTSC: 30fps */ |
| CX23885_FRAMERATE_PAL_25 /* PAL: 25fps */ |
| }; |
| enum cx23885_stream_port { |
| CX23885_OUTPUT_PORT_MEMORY, |
| CX23885_OUTPUT_PORT_STREAMING, |
| CX23885_OUTPUT_PORT_SERIAL |
| }; |
| enum cx23885_data_xfer_status { |
| CX23885_MORE_BUFFERS_FOLLOW, |
| CX23885_LAST_BUFFER, |
| }; |
| enum cx23885_picture_mask { |
| CX23885_PICTURE_MASK_NONE, |
| CX23885_PICTURE_MASK_I_FRAMES, |
| CX23885_PICTURE_MASK_I_P_FRAMES = 0x3, |
| CX23885_PICTURE_MASK_ALL_FRAMES = 0x7, |
| }; |
| enum cx23885_vbi_mode_bits { |
| CX23885_VBI_BITS_SLICED, |
| CX23885_VBI_BITS_RAW, |
| }; |
| enum cx23885_vbi_insertion_bits { |
| CX23885_VBI_BITS_INSERT_IN_XTENSION_USR_DATA, |
| CX23885_VBI_BITS_INSERT_IN_PRIVATE_PACKETS = 0x1 << 1, |
| CX23885_VBI_BITS_SEPARATE_STREAM = 0x2 << 1, |
| CX23885_VBI_BITS_SEPARATE_STREAM_USR_DATA = 0x4 << 1, |
| CX23885_VBI_BITS_SEPARATE_STREAM_PRV_DATA = 0x5 << 1, |
| }; |
| enum cx23885_dma_unit { |
| CX23885_DMA_BYTES, |
| CX23885_DMA_FRAMES, |
| }; |
| enum cx23885_dma_transfer_status_bits { |
| CX23885_DMA_TRANSFER_BITS_DONE = 0x01, |
| CX23885_DMA_TRANSFER_BITS_ERROR = 0x04, |
| CX23885_DMA_TRANSFER_BITS_LL_ERROR = 0x10, |
| }; |
| enum cx23885_pause { |
| CX23885_PAUSE_ENCODING, |
| CX23885_RESUME_ENCODING, |
| }; |
| enum cx23885_copyright { |
| CX23885_COPYRIGHT_OFF, |
| CX23885_COPYRIGHT_ON, |
| }; |
| enum cx23885_notification_type { |
| CX23885_NOTIFICATION_REFRESH, |
| }; |
| enum cx23885_notification_status { |
| CX23885_NOTIFICATION_OFF, |
| CX23885_NOTIFICATION_ON, |
| }; |
| enum cx23885_notification_mailbox { |
| CX23885_NOTIFICATION_NO_MAILBOX = -1, |
| }; |
| enum cx23885_field1_lines { |
| CX23885_FIELD1_SAA7114 = 0x00EF, /* 239 */ |
| CX23885_FIELD1_SAA7115 = 0x00F0, /* 240 */ |
| CX23885_FIELD1_MICRONAS = 0x0105, /* 261 */ |
| }; |
| enum cx23885_field2_lines { |
| CX23885_FIELD2_SAA7114 = 0x00EF, /* 239 */ |
| CX23885_FIELD2_SAA7115 = 0x00F0, /* 240 */ |
| CX23885_FIELD2_MICRONAS = 0x0106, /* 262 */ |
| }; |
| enum cx23885_custom_data_type { |
| CX23885_CUSTOM_EXTENSION_USR_DATA, |
| CX23885_CUSTOM_PRIVATE_PACKET, |
| }; |
| enum cx23885_mute { |
| CX23885_UNMUTE, |
| CX23885_MUTE, |
| }; |
| enum cx23885_mute_video_mask { |
| CX23885_MUTE_VIDEO_V_MASK = 0x0000FF00, |
| CX23885_MUTE_VIDEO_U_MASK = 0x00FF0000, |
| CX23885_MUTE_VIDEO_Y_MASK = 0xFF000000, |
| }; |
| enum cx23885_mute_video_shift { |
| CX23885_MUTE_VIDEO_V_SHIFT = 8, |
| CX23885_MUTE_VIDEO_U_SHIFT = 16, |
| CX23885_MUTE_VIDEO_Y_SHIFT = 24, |
| }; |
| |
| /* defines below are from ivtv-driver.h */ |
| #define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF |
| |
| /* Firmware API commands */ |
| #define IVTV_API_STD_TIMEOUT 500 |
| |
| /* Registers */ |
| /* IVTV_REG_OFFSET */ |
| #define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8) |
| #define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC) |
| #define IVTV_REG_SPU (0x9050) |
| #define IVTV_REG_HW_BLOCKS (0x9054) |
| #define IVTV_REG_VPU (0x9058) |
| #define IVTV_REG_APU (0xA064) |
| |
| /**** Bit definitions for MC417_RWD and MC417_OEN registers *** |
| bits 31-16 |
| +-----------+ |
| | Reserved | |
| +-----------+ |
| bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 |
| +-------+-------+-------+-------+-------+-------+-------+-------+ |
| | MIWR# | MIRD# | MICS# |MIRDY# |MIADDR3|MIADDR2|MIADDR1|MIADDR0| |
| +-------+-------+-------+-------+-------+-------+-------+-------+ |
| bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 |
| +-------+-------+-------+-------+-------+-------+-------+-------+ |
| |MIDATA7|MIDATA6|MIDATA5|MIDATA4|MIDATA3|MIDATA2|MIDATA1|MIDATA0| |
| +-------+-------+-------+-------+-------+-------+-------+-------+ |
| ***/ |
| #define MC417_MIWR 0x8000 |
| #define MC417_MIRD 0x4000 |
| #define MC417_MICS 0x2000 |
| #define MC417_MIRDY 0x1000 |
| #define MC417_MIADDR 0x0F00 |
| #define MC417_MIDATA 0x00FF |
| |
| /* MIADDR* nibble definitions */ |
| #define MCI_MEMORY_DATA_BYTE0 0x000 |
| #define MCI_MEMORY_DATA_BYTE1 0x100 |
| #define MCI_MEMORY_DATA_BYTE2 0x200 |
| #define MCI_MEMORY_DATA_BYTE3 0x300 |
| #define MCI_MEMORY_ADDRESS_BYTE2 0x400 |
| #define MCI_MEMORY_ADDRESS_BYTE1 0x500 |
| #define MCI_MEMORY_ADDRESS_BYTE0 0x600 |
| #define MCI_REGISTER_DATA_BYTE0 0x800 |
| #define MCI_REGISTER_DATA_BYTE1 0x900 |
| #define MCI_REGISTER_DATA_BYTE2 0xA00 |
| #define MCI_REGISTER_DATA_BYTE3 0xB00 |
| #define MCI_REGISTER_ADDRESS_BYTE0 0xC00 |
| #define MCI_REGISTER_ADDRESS_BYTE1 0xD00 |
| #define MCI_REGISTER_MODE 0xE00 |
| |
| /* Read and write modes */ |
| #define MCI_MODE_REGISTER_READ 0 |
| #define MCI_MODE_REGISTER_WRITE 1 |
| #define MCI_MODE_MEMORY_READ 0 |
| #define MCI_MODE_MEMORY_WRITE 0x40 |
| |
| /*** Bit definitions for MC417_CTL register **** |
| bits 31-6 bits 5-4 bit 3 bits 2-1 Bit 0 |
| +--------+-------------+--------+--------------+------------+ |
| |Reserved|MC417_SPD_CTL|Reserved|MC417_GPIO_SEL|UART_GPIO_EN| |
| +--------+-------------+--------+--------------+------------+ |
| ***/ |
| #define MC417_SPD_CTL(x) (((x) << 4) & 0x00000030) |
| #define MC417_GPIO_SEL(x) (((x) << 1) & 0x00000006) |
| #define MC417_UART_GPIO_EN 0x00000001 |
| |
| /* Values for speed control */ |
| #define MC417_SPD_CTL_SLOW 0x1 |
| #define MC417_SPD_CTL_MEDIUM 0x0 |
| #define MC417_SPD_CTL_FAST 0x3 /* b'1x, but we use b'11 */ |
| |
| /* Values for GPIO select */ |
| #define MC417_GPIO_SEL_GPIO3 0x3 |
| #define MC417_GPIO_SEL_GPIO2 0x2 |
| #define MC417_GPIO_SEL_GPIO1 0x1 |
| #define MC417_GPIO_SEL_GPIO0 0x0 |
| |
| void cx23885_mc417_init(struct cx23885_dev *dev) |
| { |
| u32 regval; |
| |
| dprintk(2, "%s()\n", __func__); |
| |
| /* Configure MC417_CTL register to defaults. */ |
| regval = MC417_SPD_CTL(MC417_SPD_CTL_FAST) | |
| MC417_GPIO_SEL(MC417_GPIO_SEL_GPIO3) | |
| MC417_UART_GPIO_EN; |
| cx_write(MC417_CTL, regval); |
| |
| /* Configure MC417_OEN to defaults. */ |
| regval = MC417_MIRDY; |
| cx_write(MC417_OEN, regval); |
| |
| /* Configure MC417_RWD to defaults. */ |
| regval = MC417_MIWR | MC417_MIRD | MC417_MICS; |
| cx_write(MC417_RWD, regval); |
| } |
| |
| static int mc417_wait_ready(struct cx23885_dev *dev) |
| { |
| u32 mi_ready; |
| unsigned long timeout = jiffies + msecs_to_jiffies(1); |
| |
| for (;;) { |
| mi_ready = cx_read(MC417_RWD) & MC417_MIRDY; |
| if (mi_ready != 0) |
| return 0; |
| if (time_after(jiffies, timeout)) |
| return -1; |
| udelay(1); |
| } |
| } |
| |
| static int mc417_register_write(struct cx23885_dev *dev, u16 address, u32 value) |
| { |
| u32 regval; |
| |
| /* Enable MC417 GPIO outputs except for MC417_MIRDY, |
| * which is an input. |
| */ |
| cx_write(MC417_OEN, MC417_MIRDY); |
| |
| /* Write data byte 0 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0 | |
| (value & 0x000000FF); |
| cx_write(MC417_RWD, regval); |
| |
| /* Transition CS/WR to effect write transaction across bus. */ |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write data byte 1 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1 | |
| ((value >> 8) & 0x000000FF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write data byte 2 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2 | |
| ((value >> 16) & 0x000000FF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write data byte 3 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3 | |
| ((value >> 24) & 0x000000FF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write address byte 0 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 | |
| (address & 0xFF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write address byte 1 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 | |
| ((address >> 8) & 0xFF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Indicate that this is a write. */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE | |
| MCI_MODE_REGISTER_WRITE; |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Wait for the trans to complete (MC417_MIRDY asserted). */ |
| return mc417_wait_ready(dev); |
| } |
| |
| static int mc417_register_read(struct cx23885_dev *dev, u16 address, u32 *value) |
| { |
| int retval; |
| u32 regval; |
| u32 tempval; |
| u32 dataval; |
| |
| /* Enable MC417 GPIO outputs except for MC417_MIRDY, |
| * which is an input. |
| */ |
| cx_write(MC417_OEN, MC417_MIRDY); |
| |
| /* Write address byte 0 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 | |
| ((address & 0x00FF)); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write address byte 1 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 | |
| ((address >> 8) & 0xFF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Indicate that this is a register read. */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE | |
| MCI_MODE_REGISTER_READ; |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Wait for the trans to complete (MC417_MIRDY asserted). */ |
| retval = mc417_wait_ready(dev); |
| |
| /* switch the DAT0-7 GPIO[10:3] to input mode */ |
| cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA); |
| |
| /* Read data byte 0 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0; |
| cx_write(MC417_RWD, regval); |
| |
| /* Transition RD to effect read transaction across bus. |
| * Transtion 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)? |
| * Should it be 0x9000 -> 0xF000 (also why is RDY being set, its |
| * input only...) |
| */ |
| regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0; |
| cx_write(MC417_RWD, regval); |
| |
| /* Collect byte */ |
| tempval = cx_read(MC417_RWD); |
| dataval = tempval & 0x000000FF; |
| |
| /* Bring CS and RD high. */ |
| regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; |
| cx_write(MC417_RWD, regval); |
| |
| /* Read data byte 1 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1; |
| cx_write(MC417_RWD, regval); |
| regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1; |
| cx_write(MC417_RWD, regval); |
| tempval = cx_read(MC417_RWD); |
| dataval |= ((tempval & 0x000000FF) << 8); |
| regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; |
| cx_write(MC417_RWD, regval); |
| |
| /* Read data byte 2 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2; |
| cx_write(MC417_RWD, regval); |
| regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2; |
| cx_write(MC417_RWD, regval); |
| tempval = cx_read(MC417_RWD); |
| dataval |= ((tempval & 0x000000FF) << 16); |
| regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; |
| cx_write(MC417_RWD, regval); |
| |
| /* Read data byte 3 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3; |
| cx_write(MC417_RWD, regval); |
| regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3; |
| cx_write(MC417_RWD, regval); |
| tempval = cx_read(MC417_RWD); |
| dataval |= ((tempval & 0x000000FF) << 24); |
| regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; |
| cx_write(MC417_RWD, regval); |
| |
| *value = dataval; |
| |
| return retval; |
| } |
| |
| int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value) |
| { |
| u32 regval; |
| |
| /* Enable MC417 GPIO outputs except for MC417_MIRDY, |
| * which is an input. |
| */ |
| cx_write(MC417_OEN, MC417_MIRDY); |
| |
| /* Write data byte 0 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0 | |
| (value & 0x000000FF); |
| cx_write(MC417_RWD, regval); |
| |
| /* Transition CS/WR to effect write transaction across bus. */ |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write data byte 1 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1 | |
| ((value >> 8) & 0x000000FF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write data byte 2 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2 | |
| ((value >> 16) & 0x000000FF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write data byte 3 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3 | |
| ((value >> 24) & 0x000000FF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write address byte 2 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 | |
| MCI_MODE_MEMORY_WRITE | ((address >> 16) & 0x3F); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write address byte 1 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 | |
| ((address >> 8) & 0xFF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write address byte 0 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 | |
| (address & 0xFF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Wait for the trans to complete (MC417_MIRDY asserted). */ |
| return mc417_wait_ready(dev); |
| } |
| |
| int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value) |
| { |
| int retval; |
| u32 regval; |
| u32 tempval; |
| u32 dataval; |
| |
| /* Enable MC417 GPIO outputs except for MC417_MIRDY, |
| * which is an input. |
| */ |
| cx_write(MC417_OEN, MC417_MIRDY); |
| |
| /* Write address byte 2 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 | |
| MCI_MODE_MEMORY_READ | ((address >> 16) & 0x3F); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write address byte 1 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 | |
| ((address >> 8) & 0xFF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Write address byte 0 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 | |
| (address & 0xFF); |
| cx_write(MC417_RWD, regval); |
| regval |= MC417_MICS | MC417_MIWR; |
| cx_write(MC417_RWD, regval); |
| |
| /* Wait for the trans to complete (MC417_MIRDY asserted). */ |
| retval = mc417_wait_ready(dev); |
| |
| /* switch the DAT0-7 GPIO[10:3] to input mode */ |
| cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA); |
| |
| /* Read data byte 3 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3; |
| cx_write(MC417_RWD, regval); |
| |
| /* Transition RD to effect read transaction across bus. */ |
| regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3; |
| cx_write(MC417_RWD, regval); |
| |
| /* Collect byte */ |
| tempval = cx_read(MC417_RWD); |
| dataval = ((tempval & 0x000000FF) << 24); |
| |
| /* Bring CS and RD high. */ |
| regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; |
| cx_write(MC417_RWD, regval); |
| |
| /* Read data byte 2 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2; |
| cx_write(MC417_RWD, regval); |
| regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2; |
| cx_write(MC417_RWD, regval); |
| tempval = cx_read(MC417_RWD); |
| dataval |= ((tempval & 0x000000FF) << 16); |
| regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; |
| cx_write(MC417_RWD, regval); |
| |
| /* Read data byte 1 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1; |
| cx_write(MC417_RWD, regval); |
| regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1; |
| cx_write(MC417_RWD, regval); |
| tempval = cx_read(MC417_RWD); |
| dataval |= ((tempval & 0x000000FF) << 8); |
| regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; |
| cx_write(MC417_RWD, regval); |
| |
| /* Read data byte 0 */ |
| regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0; |
| cx_write(MC417_RWD, regval); |
| regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0; |
| cx_write(MC417_RWD, regval); |
| tempval = cx_read(MC417_RWD); |
| dataval |= (tempval & 0x000000FF); |
| regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; |
| cx_write(MC417_RWD, regval); |
| |
| *value = dataval; |
| |
| return retval; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| /* MPEG encoder API */ |
| char *cmd_to_str(int cmd) |
| { |
| switch (cmd) { |
| case CX2341X_ENC_PING_FW: |
| return "PING_FW"; |
| case CX2341X_ENC_START_CAPTURE: |
| return "START_CAPTURE"; |
| case CX2341X_ENC_STOP_CAPTURE: |
| return "STOP_CAPTURE"; |
| case CX2341X_ENC_SET_AUDIO_ID: |
| return "SET_AUDIO_ID"; |
| case CX2341X_ENC_SET_VIDEO_ID: |
| return "SET_VIDEO_ID"; |
| case CX2341X_ENC_SET_PCR_ID: |
| return "SET_PCR_PID"; |
| case CX2341X_ENC_SET_FRAME_RATE: |
| return "SET_FRAME_RATE"; |
| case CX2341X_ENC_SET_FRAME_SIZE: |
| return "SET_FRAME_SIZE"; |
| case CX2341X_ENC_SET_BIT_RATE: |
| return "SET_BIT_RATE"; |
| case CX2341X_ENC_SET_GOP_PROPERTIES: |
| return "SET_GOP_PROPERTIES"; |
| case CX2341X_ENC_SET_ASPECT_RATIO: |
| return "SET_ASPECT_RATIO"; |
| case CX2341X_ENC_SET_DNR_FILTER_MODE: |
| return "SET_DNR_FILTER_PROPS"; |
| case CX2341X_ENC_SET_DNR_FILTER_PROPS: |
| return "SET_DNR_FILTER_PROPS"; |
| case CX2341X_ENC_SET_CORING_LEVELS: |
| return "SET_CORING_LEVELS"; |
| case CX2341X_ENC_SET_SPATIAL_FILTER_TYPE: |
| return "SET_SPATIAL_FILTER_TYPE"; |
| case CX2341X_ENC_SET_VBI_LINE: |
| return "SET_VBI_LINE"; |
| case CX2341X_ENC_SET_STREAM_TYPE: |
| return "SET_STREAM_TYPE"; |
| case CX2341X_ENC_SET_OUTPUT_PORT: |
| return "SET_OUTPUT_PORT"; |
| case CX2341X_ENC_SET_AUDIO_PROPERTIES: |
| return "SET_AUDIO_PROPERTIES"; |
| case CX2341X_ENC_HALT_FW: |
| return "HALT_FW"; |
| case CX2341X_ENC_GET_VERSION: |
| return "GET_VERSION"; |
| case CX2341X_ENC_SET_GOP_CLOSURE: |
| return "SET_GOP_CLOSURE"; |
| case CX2341X_ENC_GET_SEQ_END: |
| return "GET_SEQ_END"; |
| case CX2341X_ENC_SET_PGM_INDEX_INFO: |
| return "SET_PGM_INDEX_INFO"; |
| case CX2341X_ENC_SET_VBI_CONFIG: |
| return "SET_VBI_CONFIG"; |
| case CX2341X_ENC_SET_DMA_BLOCK_SIZE: |
| return "SET_DMA_BLOCK_SIZE"; |
| case CX2341X_ENC_GET_PREV_DMA_INFO_MB_10: |
| return "GET_PREV_DMA_INFO_MB_10"; |
| case CX2341X_ENC_GET_PREV_DMA_INFO_MB_9: |
| return "GET_PREV_DMA_INFO_MB_9"; |
| case CX2341X_ENC_SCHED_DMA_TO_HOST: |
| return "SCHED_DMA_TO_HOST"; |
| case CX2341X_ENC_INITIALIZE_INPUT: |
| return "INITIALIZE_INPUT"; |
| case CX2341X_ENC_SET_FRAME_DROP_RATE: |
| return "SET_FRAME_DROP_RATE"; |
| case CX2341X_ENC_PAUSE_ENCODER: |
| return "PAUSE_ENCODER"; |
| case CX2341X_ENC_REFRESH_INPUT: |
| return "REFRESH_INPUT"; |
| case CX2341X_ENC_SET_COPYRIGHT: |
| return "SET_COPYRIGHT"; |
| case CX2341X_ENC_SET_EVENT_NOTIFICATION: |
| return "SET_EVENT_NOTIFICATION"; |
| case CX2341X_ENC_SET_NUM_VSYNC_LINES: |
| return "SET_NUM_VSYNC_LINES"; |
| case CX2341X_ENC_SET_PLACEHOLDER: |
| return "SET_PLACEHOLDER"; |
| case CX2341X_ENC_MUTE_VIDEO: |
| return "MUTE_VIDEO"; |
| case CX2341X_ENC_MUTE_AUDIO: |
| return "MUTE_AUDIO"; |
| case CX2341X_ENC_MISC: |
| return "MISC"; |
| default: |
| return "UNKNOWN"; |
| } |
| } |
| |
| static int cx23885_mbox_func(void *priv, |
| u32 command, |
| int in, |
| int out, |
| u32 data[CX2341X_MBOX_MAX_DATA]) |
| { |
| struct cx23885_dev *dev = priv; |
| unsigned long timeout; |
| u32 value, flag, retval = 0; |
| int i; |
| |
| dprintk(3, "%s: command(0x%X) = %s\n", __func__, command, |
| cmd_to_str(command)); |
| |
| /* this may not be 100% safe if we can't read any memory location |
| without side effects */ |
| mc417_memory_read(dev, dev->cx23417_mailbox - 4, &value); |
| if (value != 0x12345678) { |
| printk(KERN_ERR |
| "Firmware and/or mailbox pointer not initialized " |
| "or corrupted, signature = 0x%x, cmd = %s\n", value, |
| cmd_to_str(command)); |
| return -1; |
| } |
| |
| /* This read looks at 32 bits, but flag is only 8 bits. |
| * Seems we also bail if CMD or TIMEOUT bytes are set??? |
| */ |
| mc417_memory_read(dev, dev->cx23417_mailbox, &flag); |
| if (flag) { |
| printk(KERN_ERR "ERROR: Mailbox appears to be in use " |
| "(%x), cmd = %s\n", flag, cmd_to_str(command)); |
| return -1; |
| } |
| |
| flag |= 1; /* tell 'em we're working on it */ |
| mc417_memory_write(dev, dev->cx23417_mailbox, flag); |
| |
| /* write command + args + fill remaining with zeros */ |
| /* command code */ |
| mc417_memory_write(dev, dev->cx23417_mailbox + 1, command); |
| mc417_memory_write(dev, dev->cx23417_mailbox + 3, |
| IVTV_API_STD_TIMEOUT); /* timeout */ |
| for (i = 0; i < in; i++) { |
| mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, data[i]); |
| dprintk(3, "API Input %d = %d\n", i, data[i]); |
| } |
| for (; i < CX2341X_MBOX_MAX_DATA; i++) |
| mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, 0); |
| |
| flag |= 3; /* tell 'em we're done writing */ |
| mc417_memory_write(dev, dev->cx23417_mailbox, flag); |
| |
| /* wait for firmware to handle the API command */ |
| timeout = jiffies + msecs_to_jiffies(10); |
| for (;;) { |
| mc417_memory_read(dev, dev->cx23417_mailbox, &flag); |
| if (0 != (flag & 4)) |
| break; |
| if (time_after(jiffies, timeout)) { |
| printk(KERN_ERR "ERROR: API Mailbox timeout\n"); |
| return -1; |
| } |
| udelay(10); |
| } |
| |
| /* read output values */ |
| for (i = 0; i < out; i++) { |
| mc417_memory_read(dev, dev->cx23417_mailbox + 4 + i, data + i); |
| dprintk(3, "API Output %d = %d\n", i, data[i]); |
| } |
| |
| mc417_memory_read(dev, dev->cx23417_mailbox + 2, &retval); |
| dprintk(3, "API result = %d\n", retval); |
| |
| flag = 0; |
| mc417_memory_write(dev, dev->cx23417_mailbox, flag); |
| |
| return retval; |
| } |
| |
| /* We don't need to call the API often, so using just one |
| * mailbox will probably suffice |
| */ |
| static int cx23885_api_cmd(struct cx23885_dev *dev, |
| u32 command, |
| u32 inputcnt, |
| u32 outputcnt, |
| ...) |
| { |
| u32 data[CX2341X_MBOX_MAX_DATA]; |
| va_list vargs; |
| int i, err; |
| |
| dprintk(3, "%s() cmds = 0x%08x\n", __func__, command); |
| |
| va_start(vargs, outputcnt); |
| for (i = 0; i < inputcnt; i++) |
| data[i] = va_arg(vargs, int); |
| |
| err = cx23885_mbox_func(dev, command, inputcnt, outputcnt, data); |
| for (i = 0; i < outputcnt; i++) { |
| int *vptr = va_arg(vargs, int *); |
| *vptr = data[i]; |
| } |
| va_end(vargs); |
| |
| return err; |
| } |
| |
| static int cx23885_find_mailbox(struct cx23885_dev *dev) |
| { |
| u32 signature[4] = { |
| 0x12345678, 0x34567812, 0x56781234, 0x78123456 |
| }; |
| int signaturecnt = 0; |
| u32 value; |
| int i; |
| |
| dprintk(2, "%s()\n", __func__); |
| |
| for (i = 0; i < CX23885_FIRM_IMAGE_SIZE; i++) { |
| mc417_memory_read(dev, i, &value); |
| if (value == signature[signaturecnt]) |
| signaturecnt++; |
| else |
| signaturecnt = 0; |
| if (4 == signaturecnt) { |
| dprintk(1, "Mailbox signature found at 0x%x\n", i+1); |
| return i+1; |
| } |
| } |
| printk(KERN_ERR "Mailbox signature values not found!\n"); |
| return -1; |
| } |
| |
| static int cx23885_load_firmware(struct cx23885_dev *dev) |
| { |
| static const unsigned char magic[8] = { |
| 0xa7, 0x0d, 0x00, 0x00, 0x66, 0xbb, 0x55, 0xaa |
| }; |
| const struct firmware *firmware; |
| int i, retval = 0; |
| u32 value = 0; |
| u32 gpio_output = 0; |
| u32 checksum = 0; |
| u32 *dataptr; |
| |
| dprintk(2, "%s()\n", __func__); |
| |
| /* Save GPIO settings before reset of APU */ |
| retval |= mc417_memory_read(dev, 0x9020, &gpio_output); |
| retval |= mc417_memory_read(dev, 0x900C, &value); |
| |
| retval = mc417_register_write(dev, |
| IVTV_REG_VPU, 0xFFFFFFED); |
| retval |= mc417_register_write(dev, |
| IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); |
| retval |= mc417_register_write(dev, |
| IVTV_REG_ENC_SDRAM_REFRESH, 0x80000800); |
| retval |= mc417_register_write(dev, |
| IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A); |
| retval |= mc417_register_write(dev, |
| IVTV_REG_APU, 0); |
| |
| if (retval != 0) { |
| printk(KERN_ERR "%s: Error with mc417_register_write\n", |
| __func__); |
| return -1; |
| } |
| |
| retval = request_firmware(&firmware, CX23885_FIRM_IMAGE_NAME, |
| &dev->pci->dev); |
| |
| if (retval != 0) { |
| printk(KERN_ERR |
| "ERROR: Hotplug firmware request failed (%s).\n", |
| CX2341X_FIRM_ENC_FILENAME); |
| printk(KERN_ERR "Please fix your hotplug setup, the board will " |
| "not work without firmware loaded!\n"); |
| return -1; |
| } |
| |
| if (firmware->size != CX23885_FIRM_IMAGE_SIZE) { |
| printk(KERN_ERR "ERROR: Firmware size mismatch " |
| "(have %zd, expected %d)\n", |
| firmware->size, CX23885_FIRM_IMAGE_SIZE); |
| release_firmware(firmware); |
| return -1; |
| } |
| |
| if (0 != memcmp(firmware->data, magic, 8)) { |
| printk(KERN_ERR |
| "ERROR: Firmware magic mismatch, wrong file?\n"); |
| release_firmware(firmware); |
| return -1; |
| } |
| |
| /* transfer to the chip */ |
| dprintk(2, "Loading firmware ...\n"); |
| dataptr = (u32 *)firmware->data; |
| for (i = 0; i < (firmware->size >> 2); i++) { |
| value = *dataptr; |
| checksum += ~value; |
| if (mc417_memory_write(dev, i, value) != 0) { |
| printk(KERN_ERR "ERROR: Loading firmware failed!\n"); |
| release_firmware(firmware); |
| return -1; |
| } |
| dataptr++; |
| } |
| |
| /* read back to verify with the checksum */ |
| dprintk(1, "Verifying firmware ...\n"); |
| for (i--; i >= 0; i--) { |
| if (mc417_memory_read(dev, i, &value) != 0) { |
| printk(KERN_ERR "ERROR: Reading firmware failed!\n"); |
| release_firmware(firmware); |
| return -1; |
| } |
| checksum -= ~value; |
| } |
| if (checksum) { |
| printk(KERN_ERR |
| "ERROR: Firmware load failed (checksum mismatch).\n"); |
| release_firmware(firmware); |
| return -1; |
| } |
| release_firmware(firmware); |
| dprintk(1, "Firmware upload successful.\n"); |
| |
| retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS, |
| IVTV_CMD_HW_BLOCKS_RST); |
| |
| /* Restore GPIO settings, make sure EIO14 is enabled as an output. */ |
| dprintk(2, "%s: GPIO output EIO 0-15 was = 0x%x\n", |
| __func__, gpio_output); |
| /* Power-up seems to have GPIOs AFU. This was causing digital side |
| * to fail at power-up. Seems GPIOs should be set to 0x10ff0411 at |
| * power-up. |
| * gpio_output |= (1<<14); |
| */ |
| /* Note: GPIO14 is specific to the HVR1800 here */ |
| gpio_output = 0x10ff0411 | (1<<14); |
| retval |= mc417_register_write(dev, 0x9020, gpio_output | (1<<14)); |
| dprintk(2, "%s: GPIO output EIO 0-15 now = 0x%x\n", |
| __func__, gpio_output); |
| |
| dprintk(1, "%s: GPIO value EIO 0-15 was = 0x%x\n", |
| __func__, value); |
| value |= (1<<14); |
| dprintk(1, "%s: GPIO value EIO 0-15 now = 0x%x\n", |
| __func__, value); |
| retval |= mc417_register_write(dev, 0x900C, value); |
| |
| retval |= mc417_register_read(dev, IVTV_REG_VPU, &value); |
| retval |= mc417_register_write(dev, IVTV_REG_VPU, value & 0xFFFFFFE8); |
| |
| if (retval < 0) |
| printk(KERN_ERR "%s: Error with mc417_register_write\n", |
| __func__); |
| return 0; |
| } |
| |
| void cx23885_417_check_encoder(struct cx23885_dev *dev) |
| { |
| u32 status, seq; |
| |
| status = seq = 0; |
| cx23885_api_cmd(dev, CX2341X_ENC_GET_SEQ_END, 0, 2, &status, &seq); |
| dprintk(1, "%s() status = %d, seq = %d\n", __func__, status, seq); |
| } |
| |
| static void cx23885_codec_settings(struct cx23885_dev *dev) |
| { |
| dprintk(1, "%s()\n", __func__); |
| |
| /* assign frame size */ |
| cx23885_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0, |
| dev->ts1.height, dev->ts1.width); |
| |
| dev->mpeg_params.width = dev->ts1.width; |
| dev->mpeg_params.height = dev->ts1.height; |
| dev->mpeg_params.is_50hz = |
| (dev->encodernorm.id & V4L2_STD_625_50) != 0; |
| |
| cx2341x_update(dev, cx23885_mbox_func, NULL, &dev->mpeg_params); |
| |
| cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 3, 1); |
| cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 4, 1); |
| } |
| |
| static int cx23885_initialize_codec(struct cx23885_dev *dev) |
| { |
| int version; |
| int retval; |
| u32 i, data[7]; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */ |
| if (retval < 0) { |
| dprintk(2, "%s() PING OK\n", __func__); |
| retval = cx23885_load_firmware(dev); |
| if (retval < 0) { |
| printk(KERN_ERR "%s() f/w load failed\n", __func__); |
| return retval; |
| } |
| dev->cx23417_mailbox = cx23885_find_mailbox(dev); |
| if (dev->cx23417_mailbox < 0) { |
| printk(KERN_ERR "%s() mailbox < 0, error\n", |
| __func__); |
| return -1; |
| } |
| retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); |
| if (retval < 0) { |
| printk(KERN_ERR |
| "ERROR: cx23417 firmware ping failed!\n"); |
| return -1; |
| } |
| retval = cx23885_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1, |
| &version); |
| if (retval < 0) { |
| printk(KERN_ERR "ERROR: cx23417 firmware get encoder :" |
| "version failed!\n"); |
| return -1; |
| } |
| dprintk(1, "cx23417 firmware version is 0x%08x\n", version); |
| msleep(200); |
| } |
| |
| cx23885_codec_settings(dev); |
| msleep(60); |
| |
| cx23885_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0, |
| CX23885_FIELD1_SAA7115, CX23885_FIELD2_SAA7115); |
| cx23885_api_cmd(dev, CX2341X_ENC_SET_PLACEHOLDER, 12, 0, |
| CX23885_CUSTOM_EXTENSION_USR_DATA, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0); |
| |
| /* Setup to capture VBI */ |
| data[0] = 0x0001BD00; |
| data[1] = 1; /* frames per interrupt */ |
| data[2] = 4; /* total bufs */ |
| data[3] = 0x91559155; /* start codes */ |
| data[4] = 0x206080C0; /* stop codes */ |
| data[5] = 6; /* lines */ |
| data[6] = 64; /* BPL */ |
| |
| cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_CONFIG, 7, 0, data[0], data[1], |
| data[2], data[3], data[4], data[5], data[6]); |
| |
| for (i = 2; i <= 24; i++) { |
| int valid; |
| |
| valid = ((i >= 19) && (i <= 21)); |
| cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, i, |
| valid, 0 , 0, 0); |
| cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, |
| i | 0x80000000, valid, 0, 0, 0); |
| } |
| |
| cx23885_api_cmd(dev, CX2341X_ENC_MUTE_AUDIO, 1, 0, CX23885_UNMUTE); |
| msleep(60); |
| |
| /* initialize the video input */ |
| cx23885_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0); |
| msleep(60); |
| |
| /* Enable VIP style pixel invalidation so we work with scaled mode */ |
| mc417_memory_write(dev, 2120, 0x00000080); |
| |
| /* start capturing to the host interface */ |
| cx23885_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0, |
| CX23885_MPEG_CAPTURE, CX23885_RAW_BITS_NONE); |
| msleep(10); |
| |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int bb_buf_setup(struct videobuf_queue *q, |
| unsigned int *count, unsigned int *size) |
| { |
| struct cx23885_fh *fh = q->priv_data; |
| |
| fh->dev->ts1.ts_packet_size = mpeglinesize; |
| fh->dev->ts1.ts_packet_count = mpeglines; |
| |
| *size = fh->dev->ts1.ts_packet_size * fh->dev->ts1.ts_packet_count; |
| *count = mpegbufs; |
| |
| return 0; |
| } |
| |
| static int bb_buf_prepare(struct videobuf_queue *q, |
| struct videobuf_buffer *vb, enum v4l2_field field) |
| { |
| struct cx23885_fh *fh = q->priv_data; |
| return cx23885_buf_prepare(q, &fh->dev->ts1, |
| (struct cx23885_buffer *)vb, |
| field); |
| } |
| |
| static void bb_buf_queue(struct videobuf_queue *q, |
| struct videobuf_buffer *vb) |
| { |
| struct cx23885_fh *fh = q->priv_data; |
| cx23885_buf_queue(&fh->dev->ts1, (struct cx23885_buffer *)vb); |
| } |
| |
| static void bb_buf_release(struct videobuf_queue *q, |
| struct videobuf_buffer *vb) |
| { |
| cx23885_free_buffer(q, (struct cx23885_buffer *)vb); |
| } |
| |
| static struct videobuf_queue_ops cx23885_qops = { |
| .buf_setup = bb_buf_setup, |
| .buf_prepare = bb_buf_prepare, |
| .buf_queue = bb_buf_queue, |
| .buf_release = bb_buf_release, |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static const u32 *ctrl_classes[] = { |
| cx2341x_mpeg_ctrls, |
| NULL |
| }; |
| |
| static int cx23885_queryctrl(struct cx23885_dev *dev, |
| struct v4l2_queryctrl *qctrl) |
| { |
| qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id); |
| if (qctrl->id == 0) |
| return -EINVAL; |
| |
| /* MPEG V4L2 controls */ |
| if (cx2341x_ctrl_query(&dev->mpeg_params, qctrl)) |
| qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; |
| |
| return 0; |
| } |
| |
| static int cx23885_querymenu(struct cx23885_dev *dev, |
| struct v4l2_querymenu *qmenu) |
| { |
| struct v4l2_queryctrl qctrl; |
| |
| qctrl.id = qmenu->id; |
| cx23885_queryctrl(dev, &qctrl); |
| return v4l2_ctrl_query_menu(qmenu, &qctrl, |
| cx2341x_ctrl_get_menu(&dev->mpeg_params, qmenu->id)); |
| } |
| |
| static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(cx23885_tvnorms); i++) |
| if (*id & cx23885_tvnorms[i].id) |
| break; |
| if (i == ARRAY_SIZE(cx23885_tvnorms)) |
| return -EINVAL; |
| dev->encodernorm = cx23885_tvnorms[i]; |
| return 0; |
| } |
| |
| static int vidioc_enum_input(struct file *file, void *priv, |
| struct v4l2_input *i) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| struct cx23885_input *input; |
| unsigned int n; |
| |
| n = i->index; |
| |
| if (n >= 4) |
| return -EINVAL; |
| |
| input = &cx23885_boards[dev->board].input[n]; |
| |
| if (input->type == 0) |
| return -EINVAL; |
| |
| memset(i, 0, sizeof(*i)); |
| i->index = n; |
| |
| /* FIXME |
| * strcpy(i->name, input->name); */ |
| strcpy(i->name, "unset"); |
| |
| if (input->type == CX23885_VMUX_TELEVISION || |
| input->type == CX23885_VMUX_CABLE) |
| i->type = V4L2_INPUT_TYPE_TUNER; |
| else |
| i->type = V4L2_INPUT_TYPE_CAMERA; |
| |
| for (n = 0; n < ARRAY_SIZE(cx23885_tvnorms); n++) |
| i->std |= cx23885_tvnorms[n].id; |
| return 0; |
| } |
| |
| static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| *i = dev->input; |
| return 0; |
| } |
| |
| static int vidioc_s_input(struct file *file, void *priv, unsigned int i) |
| { |
| if (i >= 4) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *t) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| if (UNSET == dev->tuner_type) |
| return -EINVAL; |
| if (0 != t->index) |
| return -EINVAL; |
| memset(t, 0, sizeof(*t)); |
| strcpy(t->name, "Television"); |
| cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_G_TUNER, t); |
| cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_G_TUNER, t); |
| |
| dprintk(1, "VIDIOC_G_TUNER: tuner type %d\n", t->type); |
| |
| return 0; |
| } |
| |
| static int vidioc_s_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *t) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| if (UNSET == dev->tuner_type) |
| return -EINVAL; |
| |
| /* Update the A/V core */ |
| cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_S_TUNER, t); |
| |
| return 0; |
| } |
| |
| static int vidioc_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| memset(f, 0, sizeof(*f)); |
| if (UNSET == dev->tuner_type) |
| return -EINVAL; |
| f->type = V4L2_TUNER_ANALOG_TV; |
| f->frequency = dev->freq; |
| |
| /* Assumption that tuner is always on bus 1 */ |
| cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_G_FREQUENCY, f); |
| |
| return 0; |
| } |
| |
| static int vidioc_s_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| cx23885_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, |
| CX23885_END_NOW, CX23885_MPEG_CAPTURE, |
| CX23885_RAW_BITS_NONE); |
| |
| dprintk(1, "VIDIOC_S_FREQUENCY: dev type %d, f\n", |
| dev->tuner_type); |
| dprintk(1, "VIDIOC_S_FREQUENCY: f tuner %d, f type %d\n", |
| f->tuner, f->type); |
| if (UNSET == dev->tuner_type) |
| return -EINVAL; |
| if (f->tuner != 0) |
| return -EINVAL; |
| if (f->type != V4L2_TUNER_ANALOG_TV) |
| return -EINVAL; |
| dev->freq = f->frequency; |
| |
| /* Assumption that tuner is always on bus 1 */ |
| cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_S_FREQUENCY, f); |
| |
| cx23885_initialize_codec(dev); |
| |
| return 0; |
| } |
| |
| static int vidioc_s_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctl) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| /* Update the A/V core */ |
| cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_S_CTRL, ctl); |
| return 0; |
| } |
| |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *cap) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| struct cx23885_tsport *tsport = &dev->ts1; |
| |
| memset(cap, 0, sizeof(*cap)); |
| strcpy(cap->driver, dev->name); |
| strlcpy(cap->card, cx23885_boards[tsport->dev->board].name, |
| sizeof(cap->card)); |
| sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); |
| cap->version = CX23885_VERSION_CODE; |
| cap->capabilities = |
| V4L2_CAP_VIDEO_CAPTURE | |
| V4L2_CAP_READWRITE | |
| V4L2_CAP_STREAMING | |
| 0; |
| if (UNSET != dev->tuner_type) |
| cap->capabilities |= V4L2_CAP_TUNER; |
| |
| return 0; |
| } |
| |
| static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_fmtdesc *f) |
| { |
| int index; |
| |
| index = f->index; |
| if (index != 0) |
| return -EINVAL; |
| |
| memset(f, 0, sizeof(*f)); |
| f->index = index; |
| strlcpy(f->description, "MPEG", sizeof(f->description)); |
| f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| f->pixelformat = V4L2_PIX_FMT_MPEG; |
| |
| return 0; |
| } |
| |
| static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| memset(f, 0, sizeof(*f)); |
| f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; |
| f->fmt.pix.bytesperline = 0; |
| f->fmt.pix.sizeimage = |
| dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; |
| f->fmt.pix.colorspace = 0; |
| f->fmt.pix.width = dev->ts1.width; |
| f->fmt.pix.height = dev->ts1.height; |
| f->fmt.pix.field = fh->mpegq.field; |
| dprintk(1, "VIDIOC_G_FMT: w: %d, h: %d, f: %d\n", |
| dev->ts1.width, dev->ts1.height, fh->mpegq.field); |
| return 0; |
| } |
| |
| static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; |
| f->fmt.pix.bytesperline = 0; |
| f->fmt.pix.sizeimage = |
| dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; |
| f->fmt.pix.sizeimage = |
| f->fmt.pix.colorspace = 0; |
| dprintk(1, "VIDIOC_TRY_FMT: w: %d, h: %d, f: %d\n", |
| dev->ts1.width, dev->ts1.height, fh->mpegq.field); |
| return 0; |
| } |
| |
| static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, |
| struct v4l2_format *f) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; |
| f->fmt.pix.bytesperline = 0; |
| f->fmt.pix.sizeimage = |
| dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; |
| f->fmt.pix.colorspace = 0; |
| dprintk(1, "VIDIOC_S_FMT: w: %d, h: %d, f: %d\n", |
| f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field); |
| return 0; |
| } |
| |
| static int vidioc_reqbufs(struct file *file, void *priv, |
| struct v4l2_requestbuffers *p) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| |
| return videobuf_reqbufs(&fh->mpegq, p); |
| } |
| |
| static int vidioc_querybuf(struct file *file, void *priv, |
| struct v4l2_buffer *p) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| |
| return videobuf_querybuf(&fh->mpegq, p); |
| } |
| |
| static int vidioc_qbuf(struct file *file, void *priv, |
| struct v4l2_buffer *p) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| |
| return videobuf_qbuf(&fh->mpegq, p); |
| } |
| |
| static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) |
| { |
| struct cx23885_fh *fh = priv; |
| |
| return videobuf_dqbuf(&fh->mpegq, b, file->f_flags & O_NONBLOCK); |
| } |
| |
| |
| static int vidioc_streamon(struct file *file, void *priv, |
| enum v4l2_buf_type i) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| |
| return videobuf_streamon(&fh->mpegq); |
| } |
| |
| static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| |
| return videobuf_streamoff(&fh->mpegq); |
| } |
| |
| static int vidioc_g_ext_ctrls(struct file *file, void *priv, |
| struct v4l2_ext_controls *f) |
| { |
| struct cx23885_fh *fh = priv; |
| struct cx23885_dev *dev = fh->dev; |
| |
| if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) |
| return -EINVAL; |
| return cx2341x_ext_ctrls(&dev->mpeg_params, 0, f, VIDIOC_G_EXT_CTRLS); |
| } |
| |
| static int vidioc_s_ext_ctrls(struct file *file, void *priv, |
| struct v4l2_ext_controls *f) |
| { |
| struct cx23885_fh *fh = priv; |
| struct cx23885_dev *dev = fh->dev; |
| struct cx2341x_mpeg_params p; |
| int err; |
| |
| if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) |
| return -EINVAL; |
| |
| p = dev->mpeg_params; |
| err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_S_EXT_CTRLS); |
| |
| if (err == 0) { |
| err = cx2341x_update(dev, cx23885_mbox_func, |
| &dev->mpeg_params, &p); |
| dev->mpeg_params = p; |
| } |
| return err; |
| } |
| |
| static int vidioc_try_ext_ctrls(struct file *file, void *priv, |
| struct v4l2_ext_controls *f) |
| { |
| struct cx23885_fh *fh = priv; |
| struct cx23885_dev *dev = fh->dev; |
| struct cx2341x_mpeg_params p; |
| int err; |
| |
| if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) |
| return -EINVAL; |
| |
| p = dev->mpeg_params; |
| err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_TRY_EXT_CTRLS); |
| return err; |
| } |
| |
| static int vidioc_log_status(struct file *file, void *priv) |
| { |
| struct cx23885_fh *fh = priv; |
| struct cx23885_dev *dev = fh->dev; |
| char name[32 + 2]; |
| |
| snprintf(name, sizeof(name), "%s/2", dev->name); |
| printk(KERN_INFO |
| "%s/2: ============ START LOG STATUS ============\n", |
| dev->name); |
| cx23885_call_i2c_clients(&dev->i2c_bus[0], VIDIOC_LOG_STATUS, |
| NULL); |
| cx23885_call_i2c_clients(&dev->i2c_bus[1], VIDIOC_LOG_STATUS, |
| NULL); |
| cx23885_call_i2c_clients(&dev->i2c_bus[2], VIDIOC_LOG_STATUS, |
| NULL); |
| cx2341x_log_status(&dev->mpeg_params, name); |
| printk(KERN_INFO |
| "%s/2: ============= END LOG STATUS =============\n", |
| dev->name); |
| return 0; |
| } |
| |
| static int vidioc_querymenu(struct file *file, void *priv, |
| struct v4l2_querymenu *a) |
| { |
| struct cx23885_fh *fh = priv; |
| struct cx23885_dev *dev = fh->dev; |
| |
| return cx23885_querymenu(dev, a); |
| } |
| |
| static int vidioc_queryctrl(struct file *file, void *priv, |
| struct v4l2_queryctrl *c) |
| { |
| struct cx23885_fh *fh = priv; |
| struct cx23885_dev *dev = fh->dev; |
| |
| return cx23885_queryctrl(dev, c); |
| } |
| |
| static int mpeg_open(struct inode *inode, struct file *file) |
| { |
| int minor = iminor(inode); |
| struct cx23885_dev *h, *dev = NULL; |
| struct list_head *list; |
| struct cx23885_fh *fh; |
| |
| dprintk(2, "%s()\n", __func__); |
| |
| list_for_each(list, &cx23885_devlist) { |
| h = list_entry(list, struct cx23885_dev, devlist); |
| if (h->v4l_device->minor == minor) { |
| dev = h; |
| break; |
| } |
| } |
| |
| if (dev == NULL) |
| return -ENODEV; |
| |
| /* allocate + initialize per filehandle data */ |
| fh = kzalloc(sizeof(*fh), GFP_KERNEL); |
| if (NULL == fh) |
| return -ENOMEM; |
| |
| file->private_data = fh; |
| fh->dev = dev; |
| |
| videobuf_queue_sg_init(&fh->mpegq, &cx23885_qops, |
| &dev->pci->dev, &dev->ts1.slock, |
| V4L2_BUF_TYPE_VIDEO_CAPTURE, |
| V4L2_FIELD_INTERLACED, |
| sizeof(struct cx23885_buffer), |
| fh); |
| |
| return 0; |
| } |
| |
| static int mpeg_release(struct inode *inode, struct file *file) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| dprintk(2, "%s()\n", __func__); |
| |
| /* FIXME: Review this crap */ |
| /* Shut device down on last close */ |
| if (atomic_cmpxchg(&fh->v4l_reading, 1, 0) == 1) { |
| if (atomic_dec_return(&dev->v4l_reader_count) == 0) { |
| /* stop mpeg capture */ |
| cx23885_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, |
| CX23885_END_NOW, CX23885_MPEG_CAPTURE, |
| CX23885_RAW_BITS_NONE); |
| |
| msleep(500); |
| cx23885_417_check_encoder(dev); |
| |
| cx23885_cancel_buffers(&fh->dev->ts1); |
| } |
| } |
| |
| if (fh->mpegq.streaming) |
| videobuf_streamoff(&fh->mpegq); |
| if (fh->mpegq.reading) |
| videobuf_read_stop(&fh->mpegq); |
| |
| videobuf_mmap_free(&fh->mpegq); |
| file->private_data = NULL; |
| kfree(fh); |
| |
| return 0; |
| } |
| |
| static ssize_t mpeg_read(struct file *file, char __user *data, |
| size_t count, loff_t *ppos) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| dprintk(2, "%s()\n", __func__); |
| |
| /* Deal w/ A/V decoder * and mpeg encoder sync issues. */ |
| /* Start mpeg encoder on first read. */ |
| if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { |
| if (atomic_inc_return(&dev->v4l_reader_count) == 1) { |
| if (cx23885_initialize_codec(dev) < 0) |
| return -EINVAL; |
| } |
| } |
| |
| return videobuf_read_stream(&fh->mpegq, data, count, ppos, 0, |
| file->f_flags & O_NONBLOCK); |
| } |
| |
| static unsigned int mpeg_poll(struct file *file, |
| struct poll_table_struct *wait) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| dprintk(2, "%s\n", __func__); |
| |
| return videobuf_poll_stream(file, &fh->mpegq, wait); |
| } |
| |
| static int mpeg_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| struct cx23885_fh *fh = file->private_data; |
| struct cx23885_dev *dev = fh->dev; |
| |
| dprintk(2, "%s()\n", __func__); |
| |
| return videobuf_mmap_mapper(&fh->mpegq, vma); |
| } |
| |
| static struct file_operations mpeg_fops = { |
| .owner = THIS_MODULE, |
| .open = mpeg_open, |
| .release = mpeg_release, |
| .read = mpeg_read, |
| .poll = mpeg_poll, |
| .mmap = mpeg_mmap, |
| .ioctl = video_ioctl2, |
| .llseek = no_llseek, |
| }; |
| |
| static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { |
| .vidioc_s_std = vidioc_s_std, |
| .vidioc_enum_input = vidioc_enum_input, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| .vidioc_g_tuner = vidioc_g_tuner, |
| .vidioc_s_tuner = vidioc_s_tuner, |
| .vidioc_g_frequency = vidioc_g_frequency, |
| .vidioc_s_frequency = vidioc_s_frequency, |
| .vidioc_s_ctrl = vidioc_s_ctrl, |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, |
| .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, |
| .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, |
| .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, |
| .vidioc_reqbufs = vidioc_reqbufs, |
| .vidioc_querybuf = vidioc_querybuf, |
| .vidioc_qbuf = vidioc_qbuf, |
| .vidioc_dqbuf = vidioc_dqbuf, |
| .vidioc_streamon = vidioc_streamon, |
| .vidioc_streamoff = vidioc_streamoff, |
| .vidioc_g_ext_ctrls = vidioc_g_ext_ctrls, |
| .vidioc_s_ext_ctrls = vidioc_s_ext_ctrls, |
| .vidioc_try_ext_ctrls = vidioc_try_ext_ctrls, |
| .vidioc_log_status = vidioc_log_status, |
| .vidioc_querymenu = vidioc_querymenu, |
| .vidioc_queryctrl = vidioc_queryctrl, |
| }; |
| |
| static struct video_device cx23885_mpeg_template = { |
| .name = "cx23885", |
| .fops = &mpeg_fops, |
| .ioctl_ops = &mpeg_ioctl_ops, |
| .minor = -1, |
| }; |
| |
| void cx23885_417_unregister(struct cx23885_dev *dev) |
| { |
| dprintk(1, "%s()\n", __func__); |
| |
| if (dev->v4l_device) { |
| if (-1 != dev->v4l_device->minor) |
| video_unregister_device(dev->v4l_device); |
| else |
| video_device_release(dev->v4l_device); |
| dev->v4l_device = NULL; |
| } |
| } |
| |
| static struct video_device *cx23885_video_dev_alloc( |
| struct cx23885_tsport *tsport, |
| struct pci_dev *pci, |
| struct video_device *template, |
| char *type) |
| { |
| struct video_device *vfd; |
| struct cx23885_dev *dev = tsport->dev; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| vfd = video_device_alloc(); |
| if (NULL == vfd) |
| return NULL; |
| *vfd = *template; |
| vfd->minor = -1; |
| snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name, |
| type, cx23885_boards[tsport->dev->board].name); |
| vfd->parent = &pci->dev; |
| vfd->release = video_device_release; |
| return vfd; |
| } |
| |
| int cx23885_417_register(struct cx23885_dev *dev) |
| { |
| /* FIXME: Port1 hardcoded here */ |
| int err = -ENODEV; |
| struct cx23885_tsport *tsport = &dev->ts1; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| if (cx23885_boards[dev->board].portb != CX23885_MPEG_ENCODER) |
| return err; |
| |
| /* Set default TV standard */ |
| dev->encodernorm = cx23885_tvnorms[0]; |
| |
| if (dev->encodernorm.id & V4L2_STD_525_60) |
| tsport->height = 480; |
| else |
| tsport->height = 576; |
| |
| tsport->width = 720; |
| cx2341x_fill_defaults(&dev->mpeg_params); |
| |
| dev->mpeg_params.port = CX2341X_PORT_SERIAL; |
| |
| /* Allocate and initialize V4L video device */ |
| dev->v4l_device = cx23885_video_dev_alloc(tsport, |
| dev->pci, &cx23885_mpeg_template, "mpeg"); |
| err = video_register_device(dev->v4l_device, |
| VFL_TYPE_GRABBER, -1); |
| if (err < 0) { |
| printk(KERN_INFO "%s: can't register mpeg device\n", dev->name); |
| return err; |
| } |
| |
| /* Initialize MC417 registers */ |
| cx23885_mc417_init(dev); |
| |
| printk(KERN_INFO "%s: registered device video%d [mpeg]\n", |
| dev->name, dev->v4l_device->minor & 0x1f); |
| |
| return 0; |
| } |