| /* |
| * Linux-DVB Driver for DiBcom's DiB8000 chip (ISDB-T). |
| * |
| * Copyright (C) 2009 DiBcom (http://www.dibcom.fr/) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation, version 2. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/mutex.h> |
| |
| #include "dvb_math.h" |
| |
| #include "dvb_frontend.h" |
| |
| #include "dib8000.h" |
| |
| #define LAYER_ALL -1 |
| #define LAYER_A 1 |
| #define LAYER_B 2 |
| #define LAYER_C 3 |
| |
| #define FE_CALLBACK_TIME_NEVER 0xffffffff |
| #define MAX_NUMBER_OF_FRONTENDS 6 |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); |
| |
| #define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB8000: "); printk(args); printk("\n"); } } while (0) |
| |
| #define FE_STATUS_TUNE_FAILED 0 |
| |
| struct i2c_device { |
| struct i2c_adapter *adap; |
| u8 addr; |
| u8 *i2c_write_buffer; |
| u8 *i2c_read_buffer; |
| struct mutex *i2c_buffer_lock; |
| }; |
| |
| struct dib8000_state { |
| struct dib8000_config cfg; |
| |
| struct i2c_device i2c; |
| |
| struct dibx000_i2c_master i2c_master; |
| |
| u16 wbd_ref; |
| |
| u8 current_band; |
| u32 current_bandwidth; |
| struct dibx000_agc_config *current_agc; |
| u32 timf; |
| u32 timf_default; |
| |
| u8 div_force_off:1; |
| u8 div_state:1; |
| u16 div_sync_wait; |
| |
| u8 agc_state; |
| u8 differential_constellation; |
| u8 diversity_onoff; |
| |
| s16 ber_monitored_layer; |
| u16 gpio_dir; |
| u16 gpio_val; |
| |
| u16 revision; |
| u8 isdbt_cfg_loaded; |
| enum frontend_tune_state tune_state; |
| u32 status; |
| |
| struct dvb_frontend *fe[MAX_NUMBER_OF_FRONTENDS]; |
| |
| /* for the I2C transfer */ |
| struct i2c_msg msg[2]; |
| u8 i2c_write_buffer[4]; |
| u8 i2c_read_buffer[2]; |
| struct mutex i2c_buffer_lock; |
| u8 input_mode_mpeg; |
| |
| u16 tuner_enable; |
| struct i2c_adapter dib8096p_tuner_adap; |
| }; |
| |
| enum dib8000_power_mode { |
| DIB8000_POWER_ALL = 0, |
| DIB8000_POWER_INTERFACE_ONLY, |
| }; |
| |
| static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg) |
| { |
| u16 ret; |
| struct i2c_msg msg[2] = { |
| {.addr = i2c->addr >> 1, .flags = 0, .len = 2}, |
| {.addr = i2c->addr >> 1, .flags = I2C_M_RD, .len = 2}, |
| }; |
| |
| if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) { |
| dprintk("could not acquire lock"); |
| return 0; |
| } |
| |
| msg[0].buf = i2c->i2c_write_buffer; |
| msg[0].buf[0] = reg >> 8; |
| msg[0].buf[1] = reg & 0xff; |
| msg[1].buf = i2c->i2c_read_buffer; |
| |
| if (i2c_transfer(i2c->adap, msg, 2) != 2) |
| dprintk("i2c read error on %d", reg); |
| |
| ret = (msg[1].buf[0] << 8) | msg[1].buf[1]; |
| mutex_unlock(i2c->i2c_buffer_lock); |
| return ret; |
| } |
| |
| static u16 dib8000_read_word(struct dib8000_state *state, u16 reg) |
| { |
| u16 ret; |
| |
| if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { |
| dprintk("could not acquire lock"); |
| return 0; |
| } |
| |
| state->i2c_write_buffer[0] = reg >> 8; |
| state->i2c_write_buffer[1] = reg & 0xff; |
| |
| memset(state->msg, 0, 2 * sizeof(struct i2c_msg)); |
| state->msg[0].addr = state->i2c.addr >> 1; |
| state->msg[0].flags = 0; |
| state->msg[0].buf = state->i2c_write_buffer; |
| state->msg[0].len = 2; |
| state->msg[1].addr = state->i2c.addr >> 1; |
| state->msg[1].flags = I2C_M_RD; |
| state->msg[1].buf = state->i2c_read_buffer; |
| state->msg[1].len = 2; |
| |
| if (i2c_transfer(state->i2c.adap, state->msg, 2) != 2) |
| dprintk("i2c read error on %d", reg); |
| |
| ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1]; |
| mutex_unlock(&state->i2c_buffer_lock); |
| |
| return ret; |
| } |
| |
| static u32 dib8000_read32(struct dib8000_state *state, u16 reg) |
| { |
| u16 rw[2]; |
| |
| rw[0] = dib8000_read_word(state, reg + 0); |
| rw[1] = dib8000_read_word(state, reg + 1); |
| |
| return ((rw[0] << 16) | (rw[1])); |
| } |
| |
| static int dib8000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val) |
| { |
| struct i2c_msg msg = {.addr = i2c->addr >> 1, .flags = 0, .len = 4}; |
| int ret = 0; |
| |
| if (mutex_lock_interruptible(i2c->i2c_buffer_lock) < 0) { |
| dprintk("could not acquire lock"); |
| return -EINVAL; |
| } |
| |
| msg.buf = i2c->i2c_write_buffer; |
| msg.buf[0] = (reg >> 8) & 0xff; |
| msg.buf[1] = reg & 0xff; |
| msg.buf[2] = (val >> 8) & 0xff; |
| msg.buf[3] = val & 0xff; |
| |
| ret = i2c_transfer(i2c->adap, &msg, 1) != 1 ? -EREMOTEIO : 0; |
| mutex_unlock(i2c->i2c_buffer_lock); |
| |
| return ret; |
| } |
| |
| static int dib8000_write_word(struct dib8000_state *state, u16 reg, u16 val) |
| { |
| int ret; |
| |
| if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) { |
| dprintk("could not acquire lock"); |
| return -EINVAL; |
| } |
| |
| state->i2c_write_buffer[0] = (reg >> 8) & 0xff; |
| state->i2c_write_buffer[1] = reg & 0xff; |
| state->i2c_write_buffer[2] = (val >> 8) & 0xff; |
| state->i2c_write_buffer[3] = val & 0xff; |
| |
| memset(&state->msg[0], 0, sizeof(struct i2c_msg)); |
| state->msg[0].addr = state->i2c.addr >> 1; |
| state->msg[0].flags = 0; |
| state->msg[0].buf = state->i2c_write_buffer; |
| state->msg[0].len = 4; |
| |
| ret = (i2c_transfer(state->i2c.adap, state->msg, 1) != 1 ? |
| -EREMOTEIO : 0); |
| mutex_unlock(&state->i2c_buffer_lock); |
| |
| return ret; |
| } |
| |
| static const s16 coeff_2k_sb_1seg_dqpsk[8] = { |
| (769 << 5) | 0x0a, (745 << 5) | 0x03, (595 << 5) | 0x0d, (769 << 5) | 0x0a, (920 << 5) | 0x09, (784 << 5) | 0x02, (519 << 5) | 0x0c, |
| (920 << 5) | 0x09 |
| }; |
| |
| static const s16 coeff_2k_sb_1seg[8] = { |
| (692 << 5) | 0x0b, (683 << 5) | 0x01, (519 << 5) | 0x09, (692 << 5) | 0x0b, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f |
| }; |
| |
| static const s16 coeff_2k_sb_3seg_0dqpsk_1dqpsk[8] = { |
| (832 << 5) | 0x10, (912 << 5) | 0x05, (900 << 5) | 0x12, (832 << 5) | 0x10, (-931 << 5) | 0x0f, (912 << 5) | 0x04, (807 << 5) | 0x11, |
| (-931 << 5) | 0x0f |
| }; |
| |
| static const s16 coeff_2k_sb_3seg_0dqpsk[8] = { |
| (622 << 5) | 0x0c, (941 << 5) | 0x04, (796 << 5) | 0x10, (622 << 5) | 0x0c, (982 << 5) | 0x0c, (519 << 5) | 0x02, (572 << 5) | 0x0e, |
| (982 << 5) | 0x0c |
| }; |
| |
| static const s16 coeff_2k_sb_3seg_1dqpsk[8] = { |
| (699 << 5) | 0x14, (607 << 5) | 0x04, (944 << 5) | 0x13, (699 << 5) | 0x14, (-720 << 5) | 0x0d, (640 << 5) | 0x03, (866 << 5) | 0x12, |
| (-720 << 5) | 0x0d |
| }; |
| |
| static const s16 coeff_2k_sb_3seg[8] = { |
| (664 << 5) | 0x0c, (925 << 5) | 0x03, (937 << 5) | 0x10, (664 << 5) | 0x0c, (-610 << 5) | 0x0a, (697 << 5) | 0x01, (836 << 5) | 0x0e, |
| (-610 << 5) | 0x0a |
| }; |
| |
| static const s16 coeff_4k_sb_1seg_dqpsk[8] = { |
| (-955 << 5) | 0x0e, (687 << 5) | 0x04, (818 << 5) | 0x10, (-955 << 5) | 0x0e, (-922 << 5) | 0x0d, (750 << 5) | 0x03, (665 << 5) | 0x0f, |
| (-922 << 5) | 0x0d |
| }; |
| |
| static const s16 coeff_4k_sb_1seg[8] = { |
| (638 << 5) | 0x0d, (683 << 5) | 0x02, (638 << 5) | 0x0d, (638 << 5) | 0x0d, (-655 << 5) | 0x0a, (517 << 5) | 0x00, (698 << 5) | 0x0d, |
| (-655 << 5) | 0x0a |
| }; |
| |
| static const s16 coeff_4k_sb_3seg_0dqpsk_1dqpsk[8] = { |
| (-707 << 5) | 0x14, (910 << 5) | 0x06, (889 << 5) | 0x16, (-707 << 5) | 0x14, (-958 << 5) | 0x13, (993 << 5) | 0x05, (523 << 5) | 0x14, |
| (-958 << 5) | 0x13 |
| }; |
| |
| static const s16 coeff_4k_sb_3seg_0dqpsk[8] = { |
| (-723 << 5) | 0x13, (910 << 5) | 0x05, (777 << 5) | 0x14, (-723 << 5) | 0x13, (-568 << 5) | 0x0f, (547 << 5) | 0x03, (696 << 5) | 0x12, |
| (-568 << 5) | 0x0f |
| }; |
| |
| static const s16 coeff_4k_sb_3seg_1dqpsk[8] = { |
| (-940 << 5) | 0x15, (607 << 5) | 0x05, (915 << 5) | 0x16, (-940 << 5) | 0x15, (-848 << 5) | 0x13, (683 << 5) | 0x04, (543 << 5) | 0x14, |
| (-848 << 5) | 0x13 |
| }; |
| |
| static const s16 coeff_4k_sb_3seg[8] = { |
| (612 << 5) | 0x12, (910 << 5) | 0x04, (864 << 5) | 0x14, (612 << 5) | 0x12, (-869 << 5) | 0x13, (683 << 5) | 0x02, (869 << 5) | 0x12, |
| (-869 << 5) | 0x13 |
| }; |
| |
| static const s16 coeff_8k_sb_1seg_dqpsk[8] = { |
| (-835 << 5) | 0x12, (684 << 5) | 0x05, (735 << 5) | 0x14, (-835 << 5) | 0x12, (-598 << 5) | 0x10, (781 << 5) | 0x04, (739 << 5) | 0x13, |
| (-598 << 5) | 0x10 |
| }; |
| |
| static const s16 coeff_8k_sb_1seg[8] = { |
| (673 << 5) | 0x0f, (683 << 5) | 0x03, (808 << 5) | 0x12, (673 << 5) | 0x0f, (585 << 5) | 0x0f, (512 << 5) | 0x01, (780 << 5) | 0x0f, |
| (585 << 5) | 0x0f |
| }; |
| |
| static const s16 coeff_8k_sb_3seg_0dqpsk_1dqpsk[8] = { |
| (863 << 5) | 0x17, (930 << 5) | 0x07, (878 << 5) | 0x19, (863 << 5) | 0x17, (0 << 5) | 0x14, (521 << 5) | 0x05, (980 << 5) | 0x18, |
| (0 << 5) | 0x14 |
| }; |
| |
| static const s16 coeff_8k_sb_3seg_0dqpsk[8] = { |
| (-924 << 5) | 0x17, (910 << 5) | 0x06, (774 << 5) | 0x17, (-924 << 5) | 0x17, (-877 << 5) | 0x15, (565 << 5) | 0x04, (553 << 5) | 0x15, |
| (-877 << 5) | 0x15 |
| }; |
| |
| static const s16 coeff_8k_sb_3seg_1dqpsk[8] = { |
| (-921 << 5) | 0x19, (607 << 5) | 0x06, (881 << 5) | 0x19, (-921 << 5) | 0x19, (-921 << 5) | 0x14, (713 << 5) | 0x05, (1018 << 5) | 0x18, |
| (-921 << 5) | 0x14 |
| }; |
| |
| static const s16 coeff_8k_sb_3seg[8] = { |
| (514 << 5) | 0x14, (910 << 5) | 0x05, (861 << 5) | 0x17, (514 << 5) | 0x14, (690 << 5) | 0x14, (683 << 5) | 0x03, (662 << 5) | 0x15, |
| (690 << 5) | 0x14 |
| }; |
| |
| static const s16 ana_fe_coeff_3seg[24] = { |
| 81, 80, 78, 74, 68, 61, 54, 45, 37, 28, 19, 11, 4, 1022, 1017, 1013, 1010, 1008, 1008, 1008, 1008, 1010, 1014, 1017 |
| }; |
| |
| static const s16 ana_fe_coeff_1seg[24] = { |
| 249, 226, 164, 82, 5, 981, 970, 988, 1018, 20, 31, 26, 8, 1012, 1000, 1018, 1012, 8, 15, 14, 9, 3, 1017, 1003 |
| }; |
| |
| static const s16 ana_fe_coeff_13seg[24] = { |
| 396, 305, 105, -51, -77, -12, 41, 31, -11, -30, -11, 14, 15, -2, -13, -7, 5, 8, 1, -6, -7, -3, 0, 1 |
| }; |
| |
| static u16 fft_to_mode(struct dib8000_state *state) |
| { |
| u16 mode; |
| switch (state->fe[0]->dtv_property_cache.transmission_mode) { |
| case TRANSMISSION_MODE_2K: |
| mode = 1; |
| break; |
| case TRANSMISSION_MODE_4K: |
| mode = 2; |
| break; |
| default: |
| case TRANSMISSION_MODE_AUTO: |
| case TRANSMISSION_MODE_8K: |
| mode = 3; |
| break; |
| } |
| return mode; |
| } |
| |
| static void dib8000_set_acquisition_mode(struct dib8000_state *state) |
| { |
| u16 nud = dib8000_read_word(state, 298); |
| nud |= (1 << 3) | (1 << 0); |
| dprintk("acquisition mode activated"); |
| dib8000_write_word(state, 298, nud); |
| } |
| static int dib8000_set_output_mode(struct dvb_frontend *fe, int mode) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| |
| u16 outreg, fifo_threshold, smo_mode, sram = 0x0205; /* by default SDRAM deintlv is enabled */ |
| |
| outreg = 0; |
| fifo_threshold = 1792; |
| smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1); |
| |
| dprintk("-I- Setting output mode for demod %p to %d", |
| &state->fe[0], mode); |
| |
| switch (mode) { |
| case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock |
| outreg = (1 << 10); /* 0x0400 */ |
| break; |
| case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock |
| outreg = (1 << 10) | (1 << 6); /* 0x0440 */ |
| break; |
| case OUTMODE_MPEG2_SERIAL: // STBs with serial input |
| outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */ |
| break; |
| case OUTMODE_DIVERSITY: |
| if (state->cfg.hostbus_diversity) { |
| outreg = (1 << 10) | (4 << 6); /* 0x0500 */ |
| sram &= 0xfdff; |
| } else |
| sram |= 0x0c00; |
| break; |
| case OUTMODE_MPEG2_FIFO: // e.g. USB feeding |
| smo_mode |= (3 << 1); |
| fifo_threshold = 512; |
| outreg = (1 << 10) | (5 << 6); |
| break; |
| case OUTMODE_HIGH_Z: // disable |
| outreg = 0; |
| break; |
| |
| case OUTMODE_ANALOG_ADC: |
| outreg = (1 << 10) | (3 << 6); |
| dib8000_set_acquisition_mode(state); |
| break; |
| |
| default: |
| dprintk("Unhandled output_mode passed to be set for demod %p", |
| &state->fe[0]); |
| return -EINVAL; |
| } |
| |
| if (state->cfg.output_mpeg2_in_188_bytes) |
| smo_mode |= (1 << 5); |
| |
| dib8000_write_word(state, 299, smo_mode); |
| dib8000_write_word(state, 300, fifo_threshold); /* synchronous fread */ |
| dib8000_write_word(state, 1286, outreg); |
| dib8000_write_word(state, 1291, sram); |
| |
| return 0; |
| } |
| |
| static int dib8000_set_diversity_in(struct dvb_frontend *fe, int onoff) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u16 sync_wait = dib8000_read_word(state, 273) & 0xfff0; |
| |
| if (!state->differential_constellation) { |
| dib8000_write_word(state, 272, 1 << 9); //dvsy_off_lmod4 = 1 |
| dib8000_write_word(state, 273, sync_wait | (1 << 2) | 2); // sync_enable = 1; comb_mode = 2 |
| } else { |
| dib8000_write_word(state, 272, 0); //dvsy_off_lmod4 = 0 |
| dib8000_write_word(state, 273, sync_wait); // sync_enable = 0; comb_mode = 0 |
| } |
| state->diversity_onoff = onoff; |
| |
| switch (onoff) { |
| case 0: /* only use the internal way - not the diversity input */ |
| dib8000_write_word(state, 270, 1); |
| dib8000_write_word(state, 271, 0); |
| break; |
| case 1: /* both ways */ |
| dib8000_write_word(state, 270, 6); |
| dib8000_write_word(state, 271, 6); |
| break; |
| case 2: /* only the diversity input */ |
| dib8000_write_word(state, 270, 0); |
| dib8000_write_word(state, 271, 1); |
| break; |
| } |
| return 0; |
| } |
| |
| static void dib8000_set_power_mode(struct dib8000_state *state, enum dib8000_power_mode mode) |
| { |
| /* by default everything is going to be powered off */ |
| u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0xffff, |
| reg_900 = (dib8000_read_word(state, 900) & 0xfffc) | 0x3, |
| reg_1280; |
| |
| if (state->revision != 0x8090) |
| reg_1280 = (dib8000_read_word(state, 1280) & 0x00ff) | 0xff00; |
| else |
| reg_1280 = (dib8000_read_word(state, 1280) & 0x707f) | 0x8f80; |
| |
| /* now, depending on the requested mode, we power on */ |
| switch (mode) { |
| /* power up everything in the demod */ |
| case DIB8000_POWER_ALL: |
| reg_774 = 0x0000; |
| reg_775 = 0x0000; |
| reg_776 = 0x0000; |
| reg_900 &= 0xfffc; |
| if (state->revision != 0x8090) |
| reg_1280 &= 0x00ff; |
| else |
| reg_1280 &= 0x707f; |
| break; |
| case DIB8000_POWER_INTERFACE_ONLY: |
| if (state->revision != 0x8090) |
| reg_1280 &= 0x00ff; |
| else |
| reg_1280 &= 0xfa7b; |
| break; |
| } |
| |
| dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x", reg_774, reg_775, reg_776, reg_900, reg_1280); |
| dib8000_write_word(state, 774, reg_774); |
| dib8000_write_word(state, 775, reg_775); |
| dib8000_write_word(state, 776, reg_776); |
| dib8000_write_word(state, 900, reg_900); |
| dib8000_write_word(state, 1280, reg_1280); |
| } |
| |
| static int dib8000_init_sdram(struct dib8000_state *state) |
| { |
| u16 reg = 0; |
| dprintk("Init sdram"); |
| |
| reg = dib8000_read_word(state, 274)&0xfff0; |
| /* P_dintlv_delay_ram = 7 because of MobileSdram */ |
| dib8000_write_word(state, 274, reg | 0x7); |
| |
| dib8000_write_word(state, 1803, (7<<2)); |
| |
| reg = dib8000_read_word(state, 1280); |
| /* force restart P_restart_sdram */ |
| dib8000_write_word(state, 1280, reg | (1<<2)); |
| |
| /* release restart P_restart_sdram */ |
| dib8000_write_word(state, 1280, reg); |
| |
| return 0; |
| } |
| |
| static int dib8000_set_adc_state(struct dib8000_state *state, enum dibx000_adc_states no) |
| { |
| int ret = 0; |
| u16 reg, reg_907 = dib8000_read_word(state, 907); |
| u16 reg_908 = dib8000_read_word(state, 908); |
| |
| switch (no) { |
| case DIBX000_SLOW_ADC_ON: |
| if (state->revision != 0x8090) { |
| reg_908 |= (1 << 1) | (1 << 0); |
| ret |= dib8000_write_word(state, 908, reg_908); |
| reg_908 &= ~(1 << 1); |
| } else { |
| reg = dib8000_read_word(state, 1925); |
| /* en_slowAdc = 1 & reset_sladc = 1 */ |
| dib8000_write_word(state, 1925, reg | |
| (1<<4) | (1<<2)); |
| |
| /* read acces to make it works... strange ... */ |
| reg = dib8000_read_word(state, 1925); |
| msleep(20); |
| /* en_slowAdc = 1 & reset_sladc = 0 */ |
| dib8000_write_word(state, 1925, reg & ~(1<<4)); |
| |
| reg = dib8000_read_word(state, 921) & ~((0x3 << 14) |
| | (0x3 << 12)); |
| /* ref = Vin1 => Vbg ; sel = Vin0 or Vin3 ; |
| (Vin2 = Vcm) */ |
| dib8000_write_word(state, 921, reg | (1 << 14) |
| | (3 << 12)); |
| } |
| break; |
| |
| case DIBX000_SLOW_ADC_OFF: |
| if (state->revision == 0x8090) { |
| reg = dib8000_read_word(state, 1925); |
| /* reset_sladc = 1 en_slowAdc = 0 */ |
| dib8000_write_word(state, 1925, |
| (reg & ~(1<<2)) | (1<<4)); |
| } |
| reg_908 |= (1 << 1) | (1 << 0); |
| break; |
| |
| case DIBX000_ADC_ON: |
| reg_907 &= 0x0fff; |
| reg_908 &= 0x0003; |
| break; |
| |
| case DIBX000_ADC_OFF: // leave the VBG voltage on |
| reg_907 |= (1 << 14) | (1 << 13) | (1 << 12); |
| reg_908 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2); |
| break; |
| |
| case DIBX000_VBG_ENABLE: |
| reg_907 &= ~(1 << 15); |
| break; |
| |
| case DIBX000_VBG_DISABLE: |
| reg_907 |= (1 << 15); |
| break; |
| |
| default: |
| break; |
| } |
| |
| ret |= dib8000_write_word(state, 907, reg_907); |
| ret |= dib8000_write_word(state, 908, reg_908); |
| |
| return ret; |
| } |
| |
| static int dib8000_set_bandwidth(struct dvb_frontend *fe, u32 bw) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u32 timf; |
| |
| if (bw == 0) |
| bw = 6000; |
| |
| if (state->timf == 0) { |
| dprintk("using default timf"); |
| timf = state->timf_default; |
| } else { |
| dprintk("using updated timf"); |
| timf = state->timf; |
| } |
| |
| dib8000_write_word(state, 29, (u16) ((timf >> 16) & 0xffff)); |
| dib8000_write_word(state, 30, (u16) ((timf) & 0xffff)); |
| |
| return 0; |
| } |
| |
| static int dib8000_sad_calib(struct dib8000_state *state) |
| { |
| if (state->revision == 0x8090) { |
| dprintk("%s: the sad calibration is not needed for the dib8096P", |
| __func__); |
| return 0; |
| } |
| /* internal */ |
| dib8000_write_word(state, 923, (0 << 1) | (0 << 0)); |
| dib8000_write_word(state, 924, 776); // 0.625*3.3 / 4096 |
| |
| /* do the calibration */ |
| dib8000_write_word(state, 923, (1 << 0)); |
| dib8000_write_word(state, 923, (0 << 0)); |
| |
| msleep(1); |
| return 0; |
| } |
| |
| int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| if (value > 4095) |
| value = 4095; |
| state->wbd_ref = value; |
| return dib8000_write_word(state, 106, value); |
| } |
| |
| EXPORT_SYMBOL(dib8000_set_wbd_ref); |
| static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw) |
| { |
| dprintk("ifreq: %d %x, inversion: %d", bw->ifreq, bw->ifreq, bw->ifreq >> 25); |
| if (state->revision != 0x8090) { |
| dib8000_write_word(state, 23, |
| (u16) (((bw->internal * 1000) >> 16) & 0xffff)); |
| dib8000_write_word(state, 24, |
| (u16) ((bw->internal * 1000) & 0xffff)); |
| } else { |
| dib8000_write_word(state, 23, (u16) (((bw->internal / 2 * 1000) >> 16) & 0xffff)); |
| dib8000_write_word(state, 24, |
| (u16) ((bw->internal / 2 * 1000) & 0xffff)); |
| } |
| dib8000_write_word(state, 27, (u16) ((bw->ifreq >> 16) & 0x01ff)); |
| dib8000_write_word(state, 28, (u16) (bw->ifreq & 0xffff)); |
| dib8000_write_word(state, 26, (u16) ((bw->ifreq >> 25) & 0x0003)); |
| |
| if (state->revision != 0x8090) |
| dib8000_write_word(state, 922, bw->sad_cfg); |
| } |
| |
| static void dib8000_reset_pll(struct dib8000_state *state) |
| { |
| const struct dibx000_bandwidth_config *pll = state->cfg.pll; |
| u16 clk_cfg1, reg; |
| |
| if (state->revision != 0x8090) { |
| dib8000_write_word(state, 901, |
| (pll->pll_prediv << 8) | (pll->pll_ratio << 0)); |
| |
| clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) | |
| (pll->bypclk_div << 5) | (pll->enable_refdiv << 4) | |
| (1 << 3) | (pll->pll_range << 1) | |
| (pll->pll_reset << 0); |
| |
| dib8000_write_word(state, 902, clk_cfg1); |
| clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3); |
| dib8000_write_word(state, 902, clk_cfg1); |
| |
| dprintk("clk_cfg1: 0x%04x", clk_cfg1); |
| |
| /* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */ |
| if (state->cfg.pll->ADClkSrc == 0) |
| dib8000_write_word(state, 904, |
| (0 << 15) | (0 << 12) | (0 << 10) | |
| (pll->modulo << 8) | |
| (pll->ADClkSrc << 7) | (0 << 1)); |
| else if (state->cfg.refclksel != 0) |
| dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | |
| ((state->cfg.refclksel & 0x3) << 10) | |
| (pll->modulo << 8) | |
| (pll->ADClkSrc << 7) | (0 << 1)); |
| else |
| dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | |
| (3 << 10) | (pll->modulo << 8) | |
| (pll->ADClkSrc << 7) | (0 << 1)); |
| } else { |
| dib8000_write_word(state, 1856, (!pll->pll_reset<<13) | |
| (pll->pll_range<<12) | (pll->pll_ratio<<6) | |
| (pll->pll_prediv)); |
| |
| reg = dib8000_read_word(state, 1857); |
| dib8000_write_word(state, 1857, reg|(!pll->pll_bypass<<15)); |
| |
| reg = dib8000_read_word(state, 1858); /* Force clk out pll /2 */ |
| dib8000_write_word(state, 1858, reg | 1); |
| |
| dib8000_write_word(state, 904, (pll->modulo << 8)); |
| } |
| |
| dib8000_reset_pll_common(state, pll); |
| } |
| |
| int dib8000_update_pll(struct dvb_frontend *fe, |
| struct dibx000_bandwidth_config *pll) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u16 reg_1857, reg_1856 = dib8000_read_word(state, 1856); |
| u8 loopdiv, prediv; |
| u32 internal, xtal; |
| |
| /* get back old values */ |
| prediv = reg_1856 & 0x3f; |
| loopdiv = (reg_1856 >> 6) & 0x3f; |
| |
| if ((pll != NULL) && (pll->pll_prediv != prediv || |
| pll->pll_ratio != loopdiv)) { |
| dprintk("Updating pll (prediv: old = %d new = %d ; loopdiv : old = %d new = %d)", prediv, pll->pll_prediv, loopdiv, pll->pll_ratio); |
| reg_1856 &= 0xf000; |
| reg_1857 = dib8000_read_word(state, 1857); |
| /* disable PLL */ |
| dib8000_write_word(state, 1857, reg_1857 & ~(1 << 15)); |
| |
| dib8000_write_word(state, 1856, reg_1856 | |
| ((pll->pll_ratio & 0x3f) << 6) | |
| (pll->pll_prediv & 0x3f)); |
| |
| /* write new system clk into P_sec_len */ |
| internal = dib8000_read32(state, 23) / 1000; |
| dprintk("Old Internal = %d", internal); |
| xtal = 2 * (internal / loopdiv) * prediv; |
| internal = 1000 * (xtal/pll->pll_prediv) * pll->pll_ratio; |
| dprintk("Xtal = %d , New Fmem = %d New Fdemod = %d, New Fsampling = %d", xtal, internal/1000, internal/2000, internal/8000); |
| dprintk("New Internal = %d", internal); |
| |
| dib8000_write_word(state, 23, |
| (u16) (((internal / 2) >> 16) & 0xffff)); |
| dib8000_write_word(state, 24, (u16) ((internal / 2) & 0xffff)); |
| /* enable PLL */ |
| dib8000_write_word(state, 1857, reg_1857 | (1 << 15)); |
| |
| while (((dib8000_read_word(state, 1856)>>15)&0x1) != 1) |
| dprintk("Waiting for PLL to lock"); |
| |
| /* verify */ |
| reg_1856 = dib8000_read_word(state, 1856); |
| dprintk("PLL Updated with prediv = %d and loopdiv = %d", |
| reg_1856&0x3f, (reg_1856>>6)&0x3f); |
| |
| return 0; |
| } |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL(dib8000_update_pll); |
| |
| |
| static int dib8000_reset_gpio(struct dib8000_state *st) |
| { |
| /* reset the GPIOs */ |
| dib8000_write_word(st, 1029, st->cfg.gpio_dir); |
| dib8000_write_word(st, 1030, st->cfg.gpio_val); |
| |
| /* TODO 782 is P_gpio_od */ |
| |
| dib8000_write_word(st, 1032, st->cfg.gpio_pwm_pos); |
| |
| dib8000_write_word(st, 1037, st->cfg.pwm_freq_div); |
| return 0; |
| } |
| |
| static int dib8000_cfg_gpio(struct dib8000_state *st, u8 num, u8 dir, u8 val) |
| { |
| st->cfg.gpio_dir = dib8000_read_word(st, 1029); |
| st->cfg.gpio_dir &= ~(1 << num); /* reset the direction bit */ |
| st->cfg.gpio_dir |= (dir & 0x1) << num; /* set the new direction */ |
| dib8000_write_word(st, 1029, st->cfg.gpio_dir); |
| |
| st->cfg.gpio_val = dib8000_read_word(st, 1030); |
| st->cfg.gpio_val &= ~(1 << num); /* reset the direction bit */ |
| st->cfg.gpio_val |= (val & 0x01) << num; /* set the new value */ |
| dib8000_write_word(st, 1030, st->cfg.gpio_val); |
| |
| dprintk("gpio dir: %x: gpio val: %x", st->cfg.gpio_dir, st->cfg.gpio_val); |
| |
| return 0; |
| } |
| |
| int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| return dib8000_cfg_gpio(state, num, dir, val); |
| } |
| |
| EXPORT_SYMBOL(dib8000_set_gpio); |
| static const u16 dib8000_defaults[] = { |
| /* auto search configuration - lock0 by default waiting |
| * for cpil_lock; lock1 cpil_lock; lock2 tmcc_sync_lock */ |
| 3, 7, |
| 0x0004, |
| 0x0400, |
| 0x0814, |
| |
| 12, 11, |
| 0x001b, |
| 0x7740, |
| 0x005b, |
| 0x8d80, |
| 0x01c9, |
| 0xc380, |
| 0x0000, |
| 0x0080, |
| 0x0000, |
| 0x0090, |
| 0x0001, |
| 0xd4c0, |
| |
| /*1, 32, |
| 0x6680 // P_corm_thres Lock algorithms configuration */ |
| |
| 11, 80, /* set ADC level to -16 */ |
| (1 << 13) - 825 - 117, |
| (1 << 13) - 837 - 117, |
| (1 << 13) - 811 - 117, |
| (1 << 13) - 766 - 117, |
| (1 << 13) - 737 - 117, |
| (1 << 13) - 693 - 117, |
| (1 << 13) - 648 - 117, |
| (1 << 13) - 619 - 117, |
| (1 << 13) - 575 - 117, |
| (1 << 13) - 531 - 117, |
| (1 << 13) - 501 - 117, |
| |
| 4, 108, |
| 0, |
| 0, |
| 0, |
| 0, |
| |
| 1, 175, |
| 0x0410, |
| 1, 179, |
| 8192, // P_fft_nb_to_cut |
| |
| 6, 181, |
| 0x2800, // P_coff_corthres_ ( 2k 4k 8k ) 0x2800 |
| 0x2800, |
| 0x2800, |
| 0x2800, // P_coff_cpilthres_ ( 2k 4k 8k ) 0x2800 |
| 0x2800, |
| 0x2800, |
| |
| 2, 193, |
| 0x0666, // P_pha3_thres |
| 0x0000, // P_cti_use_cpe, P_cti_use_prog |
| |
| 2, 205, |
| 0x200f, // P_cspu_regul, P_cspu_win_cut |
| 0x000f, // P_des_shift_work |
| |
| 5, 215, |
| 0x023d, // P_adp_regul_cnt |
| 0x00a4, // P_adp_noise_cnt |
| 0x00a4, // P_adp_regul_ext |
| 0x7ff0, // P_adp_noise_ext |
| 0x3ccc, // P_adp_fil |
| |
| 1, 230, |
| 0x0000, // P_2d_byp_ti_num |
| |
| 1, 263, |
| 0x800, //P_equal_thres_wgn |
| |
| 1, 268, |
| (2 << 9) | 39, // P_equal_ctrl_synchro, P_equal_speedmode |
| |
| 1, 270, |
| 0x0001, // P_div_lock0_wait |
| 1, 285, |
| 0x0020, //p_fec_ |
| 1, 299, |
| 0x0062, /* P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard */ |
| |
| 1, 338, |
| (1 << 12) | // P_ctrl_corm_thres4pre_freq_inh=1 |
| (1 << 10) | |
| (0 << 9) | /* P_ctrl_pre_freq_inh=0 */ |
| (3 << 5) | /* P_ctrl_pre_freq_step=3 */ |
| (1 << 0), /* P_pre_freq_win_len=1 */ |
| |
| 0, |
| }; |
| |
| static u16 dib8000_identify(struct i2c_device *client) |
| { |
| u16 value; |
| |
| //because of glitches sometimes |
| value = dib8000_i2c_read16(client, 896); |
| |
| if ((value = dib8000_i2c_read16(client, 896)) != 0x01b3) { |
| dprintk("wrong Vendor ID (read=0x%x)", value); |
| return 0; |
| } |
| |
| value = dib8000_i2c_read16(client, 897); |
| if (value != 0x8000 && value != 0x8001 && |
| value != 0x8002 && value != 0x8090) { |
| dprintk("wrong Device ID (%x)", value); |
| return 0; |
| } |
| |
| switch (value) { |
| case 0x8000: |
| dprintk("found DiB8000A"); |
| break; |
| case 0x8001: |
| dprintk("found DiB8000B"); |
| break; |
| case 0x8002: |
| dprintk("found DiB8000C"); |
| break; |
| case 0x8090: |
| dprintk("found DiB8096P"); |
| break; |
| } |
| return value; |
| } |
| |
| static int dib8000_reset(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| |
| if ((state->revision = dib8000_identify(&state->i2c)) == 0) |
| return -EINVAL; |
| |
| /* sram lead in, rdy */ |
| if (state->revision != 0x8090) |
| dib8000_write_word(state, 1287, 0x0003); |
| |
| if (state->revision == 0x8000) |
| dprintk("error : dib8000 MA not supported"); |
| |
| dibx000_reset_i2c_master(&state->i2c_master); |
| |
| dib8000_set_power_mode(state, DIB8000_POWER_ALL); |
| |
| /* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */ |
| dib8000_set_adc_state(state, DIBX000_VBG_ENABLE); |
| |
| /* restart all parts */ |
| dib8000_write_word(state, 770, 0xffff); |
| dib8000_write_word(state, 771, 0xffff); |
| dib8000_write_word(state, 772, 0xfffc); |
| if (state->revision == 0x8090) |
| dib8000_write_word(state, 1280, 0x0045); |
| else |
| dib8000_write_word(state, 1280, 0x004d); |
| dib8000_write_word(state, 1281, 0x000c); |
| |
| dib8000_write_word(state, 770, 0x0000); |
| dib8000_write_word(state, 771, 0x0000); |
| dib8000_write_word(state, 772, 0x0000); |
| dib8000_write_word(state, 898, 0x0004); // sad |
| dib8000_write_word(state, 1280, 0x0000); |
| dib8000_write_word(state, 1281, 0x0000); |
| |
| /* drives */ |
| if (state->revision != 0x8090) { |
| if (state->cfg.drives) |
| dib8000_write_word(state, 906, state->cfg.drives); |
| else { |
| dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal."); |
| /* min drive SDRAM - not optimal - adjust */ |
| dib8000_write_word(state, 906, 0x2d98); |
| } |
| } |
| |
| dib8000_reset_pll(state); |
| if (state->revision != 0x8090) |
| dib8000_write_word(state, 898, 0x0004); |
| |
| if (dib8000_reset_gpio(state) != 0) |
| dprintk("GPIO reset was not successful."); |
| |
| if ((state->revision != 0x8090) && |
| (dib8000_set_output_mode(fe, OUTMODE_HIGH_Z) != 0)) |
| dprintk("OUTPUT_MODE could not be resetted."); |
| |
| state->current_agc = NULL; |
| |
| // P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ... |
| /* P_iqc_ca2 = 0; P_iqc_impnc_on = 0; P_iqc_mode = 0; */ |
| if (state->cfg.pll->ifreq == 0) |
| dib8000_write_word(state, 40, 0x0755); /* P_iqc_corr_inh = 0 enable IQcorr block */ |
| else |
| dib8000_write_word(state, 40, 0x1f55); /* P_iqc_corr_inh = 1 disable IQcorr block */ |
| |
| { |
| u16 l = 0, r; |
| const u16 *n; |
| n = dib8000_defaults; |
| l = *n++; |
| while (l) { |
| r = *n++; |
| do { |
| dib8000_write_word(state, r, *n++); |
| r++; |
| } while (--l); |
| l = *n++; |
| } |
| } |
| if (state->revision != 0x8090) |
| dib8000_write_word(state, 903, (0 << 4) | 2); |
| state->isdbt_cfg_loaded = 0; |
| |
| //div_cfg override for special configs |
| if (state->cfg.div_cfg != 0) |
| dib8000_write_word(state, 903, state->cfg.div_cfg); |
| |
| /* unforce divstr regardless whether i2c enumeration was done or not */ |
| dib8000_write_word(state, 1285, dib8000_read_word(state, 1285) & ~(1 << 1)); |
| |
| dib8000_set_bandwidth(fe, 6000); |
| |
| dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON); |
| if (state->revision != 0x8090) { |
| dib8000_sad_calib(state); |
| dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF); |
| } |
| |
| dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY); |
| |
| return 0; |
| } |
| |
| static void dib8000_restart_agc(struct dib8000_state *state) |
| { |
| // P_restart_iqc & P_restart_agc |
| dib8000_write_word(state, 770, 0x0a00); |
| dib8000_write_word(state, 770, 0x0000); |
| } |
| |
| static int dib8000_update_lna(struct dib8000_state *state) |
| { |
| u16 dyn_gain; |
| |
| if (state->cfg.update_lna) { |
| // read dyn_gain here (because it is demod-dependent and not tuner) |
| dyn_gain = dib8000_read_word(state, 390); |
| |
| if (state->cfg.update_lna(state->fe[0], dyn_gain)) { |
| dib8000_restart_agc(state); |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| static int dib8000_set_agc_config(struct dib8000_state *state, u8 band) |
| { |
| struct dibx000_agc_config *agc = NULL; |
| int i; |
| u16 reg; |
| |
| if (state->current_band == band && state->current_agc != NULL) |
| return 0; |
| state->current_band = band; |
| |
| for (i = 0; i < state->cfg.agc_config_count; i++) |
| if (state->cfg.agc[i].band_caps & band) { |
| agc = &state->cfg.agc[i]; |
| break; |
| } |
| |
| if (agc == NULL) { |
| dprintk("no valid AGC configuration found for band 0x%02x", band); |
| return -EINVAL; |
| } |
| |
| state->current_agc = agc; |
| |
| /* AGC */ |
| dib8000_write_word(state, 76, agc->setup); |
| dib8000_write_word(state, 77, agc->inv_gain); |
| dib8000_write_word(state, 78, agc->time_stabiliz); |
| dib8000_write_word(state, 101, (agc->alpha_level << 12) | agc->thlock); |
| |
| // Demod AGC loop configuration |
| dib8000_write_word(state, 102, (agc->alpha_mant << 5) | agc->alpha_exp); |
| dib8000_write_word(state, 103, (agc->beta_mant << 6) | agc->beta_exp); |
| |
| dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d", |
| state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel); |
| |
| /* AGC continued */ |
| if (state->wbd_ref != 0) |
| dib8000_write_word(state, 106, state->wbd_ref); |
| else // use default |
| dib8000_write_word(state, 106, agc->wbd_ref); |
| |
| if (state->revision == 0x8090) { |
| reg = dib8000_read_word(state, 922) & (0x3 << 2); |
| dib8000_write_word(state, 922, reg | (agc->wbd_sel << 2)); |
| } |
| |
| dib8000_write_word(state, 107, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8)); |
| dib8000_write_word(state, 108, agc->agc1_max); |
| dib8000_write_word(state, 109, agc->agc1_min); |
| dib8000_write_word(state, 110, agc->agc2_max); |
| dib8000_write_word(state, 111, agc->agc2_min); |
| dib8000_write_word(state, 112, (agc->agc1_pt1 << 8) | agc->agc1_pt2); |
| dib8000_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2); |
| dib8000_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2); |
| dib8000_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2); |
| |
| dib8000_write_word(state, 75, agc->agc1_pt3); |
| if (state->revision != 0x8090) |
| dib8000_write_word(state, 923, |
| (dib8000_read_word(state, 923) & 0xffe3) | |
| (agc->wbd_inv << 4) | (agc->wbd_sel << 2)); |
| |
| return 0; |
| } |
| |
| void dib8000_pwm_agc_reset(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| dib8000_set_adc_state(state, DIBX000_ADC_ON); |
| dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))); |
| } |
| EXPORT_SYMBOL(dib8000_pwm_agc_reset); |
| |
| static int dib8000_agc_soft_split(struct dib8000_state *state) |
| { |
| u16 agc, split_offset; |
| |
| if (!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0) |
| return FE_CALLBACK_TIME_NEVER; |
| |
| // n_agc_global |
| agc = dib8000_read_word(state, 390); |
| |
| if (agc > state->current_agc->split.min_thres) |
| split_offset = state->current_agc->split.min; |
| else if (agc < state->current_agc->split.max_thres) |
| split_offset = state->current_agc->split.max; |
| else |
| split_offset = state->current_agc->split.max * |
| (agc - state->current_agc->split.min_thres) / |
| (state->current_agc->split.max_thres - state->current_agc->split.min_thres); |
| |
| dprintk("AGC split_offset: %d", split_offset); |
| |
| // P_agc_force_split and P_agc_split_offset |
| dib8000_write_word(state, 107, (dib8000_read_word(state, 107) & 0xff00) | split_offset); |
| return 5000; |
| } |
| |
| static int dib8000_agc_startup(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| enum frontend_tune_state *tune_state = &state->tune_state; |
| int ret = 0; |
| u16 reg, upd_demod_gain_period = 0x8000; |
| |
| switch (*tune_state) { |
| case CT_AGC_START: |
| // set power-up level: interf+analog+AGC |
| |
| if (state->revision != 0x8090) |
| dib8000_set_adc_state(state, DIBX000_ADC_ON); |
| else { |
| dib8000_set_power_mode(state, DIB8000_POWER_ALL); |
| |
| reg = dib8000_read_word(state, 1947)&0xff00; |
| dib8000_write_word(state, 1946, |
| upd_demod_gain_period & 0xFFFF); |
| /* bit 14 = enDemodGain */ |
| dib8000_write_word(state, 1947, reg | (1<<14) | |
| ((upd_demod_gain_period >> 16) & 0xFF)); |
| |
| /* enable adc i & q */ |
| reg = dib8000_read_word(state, 1920); |
| dib8000_write_word(state, 1920, (reg | 0x3) & |
| (~(1 << 7))); |
| } |
| |
| if (dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))) != 0) { |
| *tune_state = CT_AGC_STOP; |
| state->status = FE_STATUS_TUNE_FAILED; |
| break; |
| } |
| |
| ret = 70; |
| *tune_state = CT_AGC_STEP_0; |
| break; |
| |
| case CT_AGC_STEP_0: |
| //AGC initialization |
| if (state->cfg.agc_control) |
| state->cfg.agc_control(fe, 1); |
| |
| dib8000_restart_agc(state); |
| |
| // wait AGC rough lock time |
| ret = 50; |
| *tune_state = CT_AGC_STEP_1; |
| break; |
| |
| case CT_AGC_STEP_1: |
| // wait AGC accurate lock time |
| ret = 70; |
| |
| if (dib8000_update_lna(state)) |
| // wait only AGC rough lock time |
| ret = 50; |
| else |
| *tune_state = CT_AGC_STEP_2; |
| break; |
| |
| case CT_AGC_STEP_2: |
| dib8000_agc_soft_split(state); |
| |
| if (state->cfg.agc_control) |
| state->cfg.agc_control(fe, 0); |
| |
| *tune_state = CT_AGC_STOP; |
| break; |
| default: |
| ret = dib8000_agc_soft_split(state); |
| break; |
| } |
| return ret; |
| |
| } |
| |
| static void dib8096p_host_bus_drive(struct dib8000_state *state, u8 drive) |
| { |
| u16 reg; |
| |
| drive &= 0x7; |
| |
| /* drive host bus 2, 3, 4 */ |
| reg = dib8000_read_word(state, 1798) & |
| ~(0x7 | (0x7 << 6) | (0x7 << 12)); |
| reg |= (drive<<12) | (drive<<6) | drive; |
| dib8000_write_word(state, 1798, reg); |
| |
| /* drive host bus 5,6 */ |
| reg = dib8000_read_word(state, 1799) & ~((0x7 << 2) | (0x7 << 8)); |
| reg |= (drive<<8) | (drive<<2); |
| dib8000_write_word(state, 1799, reg); |
| |
| /* drive host bus 7, 8, 9 */ |
| reg = dib8000_read_word(state, 1800) & |
| ~(0x7 | (0x7 << 6) | (0x7 << 12)); |
| reg |= (drive<<12) | (drive<<6) | drive; |
| dib8000_write_word(state, 1800, reg); |
| |
| /* drive host bus 10, 11 */ |
| reg = dib8000_read_word(state, 1801) & ~((0x7 << 2) | (0x7 << 8)); |
| reg |= (drive<<8) | (drive<<2); |
| dib8000_write_word(state, 1801, reg); |
| |
| /* drive host bus 12, 13, 14 */ |
| reg = dib8000_read_word(state, 1802) & |
| ~(0x7 | (0x7 << 6) | (0x7 << 12)); |
| reg |= (drive<<12) | (drive<<6) | drive; |
| dib8000_write_word(state, 1802, reg); |
| } |
| |
| static u32 dib8096p_calcSyncFreq(u32 P_Kin, u32 P_Kout, |
| u32 insertExtSynchro, u32 syncSize) |
| { |
| u32 quantif = 3; |
| u32 nom = (insertExtSynchro * P_Kin+syncSize); |
| u32 denom = P_Kout; |
| u32 syncFreq = ((nom << quantif) / denom); |
| |
| if ((syncFreq & ((1 << quantif) - 1)) != 0) |
| syncFreq = (syncFreq >> quantif) + 1; |
| else |
| syncFreq = (syncFreq >> quantif); |
| |
| if (syncFreq != 0) |
| syncFreq = syncFreq - 1; |
| |
| return syncFreq; |
| } |
| |
| static void dib8096p_cfg_DibTx(struct dib8000_state *state, u32 P_Kin, |
| u32 P_Kout, u32 insertExtSynchro, u32 synchroMode, |
| u32 syncWord, u32 syncSize) |
| { |
| dprintk("Configure DibStream Tx"); |
| |
| dib8000_write_word(state, 1615, 1); |
| dib8000_write_word(state, 1603, P_Kin); |
| dib8000_write_word(state, 1605, P_Kout); |
| dib8000_write_word(state, 1606, insertExtSynchro); |
| dib8000_write_word(state, 1608, synchroMode); |
| dib8000_write_word(state, 1609, (syncWord >> 16) & 0xffff); |
| dib8000_write_word(state, 1610, syncWord & 0xffff); |
| dib8000_write_word(state, 1612, syncSize); |
| dib8000_write_word(state, 1615, 0); |
| } |
| |
| static void dib8096p_cfg_DibRx(struct dib8000_state *state, u32 P_Kin, |
| u32 P_Kout, u32 synchroMode, u32 insertExtSynchro, |
| u32 syncWord, u32 syncSize, u32 dataOutRate) |
| { |
| u32 syncFreq; |
| |
| dprintk("Configure DibStream Rx synchroMode = %d", synchroMode); |
| |
| if ((P_Kin != 0) && (P_Kout != 0)) { |
| syncFreq = dib8096p_calcSyncFreq(P_Kin, P_Kout, |
| insertExtSynchro, syncSize); |
| dib8000_write_word(state, 1542, syncFreq); |
| } |
| |
| dib8000_write_word(state, 1554, 1); |
| dib8000_write_word(state, 1536, P_Kin); |
| dib8000_write_word(state, 1537, P_Kout); |
| dib8000_write_word(state, 1539, synchroMode); |
| dib8000_write_word(state, 1540, (syncWord >> 16) & 0xffff); |
| dib8000_write_word(state, 1541, syncWord & 0xffff); |
| dib8000_write_word(state, 1543, syncSize); |
| dib8000_write_word(state, 1544, dataOutRate); |
| dib8000_write_word(state, 1554, 0); |
| } |
| |
| static void dib8096p_enMpegMux(struct dib8000_state *state, int onoff) |
| { |
| u16 reg_1287; |
| |
| reg_1287 = dib8000_read_word(state, 1287); |
| |
| switch (onoff) { |
| case 1: |
| reg_1287 &= ~(1 << 8); |
| break; |
| case 0: |
| reg_1287 |= (1 << 8); |
| break; |
| } |
| |
| dib8000_write_word(state, 1287, reg_1287); |
| } |
| |
| static void dib8096p_configMpegMux(struct dib8000_state *state, |
| u16 pulseWidth, u16 enSerialMode, u16 enSerialClkDiv2) |
| { |
| u16 reg_1287; |
| |
| dprintk("Enable Mpeg mux"); |
| |
| dib8096p_enMpegMux(state, 0); |
| |
| /* If the input mode is MPEG do not divide the serial clock */ |
| if ((enSerialMode == 1) && (state->input_mode_mpeg == 1)) |
| enSerialClkDiv2 = 0; |
| |
| reg_1287 = ((pulseWidth & 0x1f) << 3) | |
| ((enSerialMode & 0x1) << 2) | (enSerialClkDiv2 & 0x1); |
| dib8000_write_word(state, 1287, reg_1287); |
| |
| dib8096p_enMpegMux(state, 1); |
| } |
| |
| static void dib8096p_setDibTxMux(struct dib8000_state *state, int mode) |
| { |
| u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 7); |
| |
| switch (mode) { |
| case MPEG_ON_DIBTX: |
| dprintk("SET MPEG ON DIBSTREAM TX"); |
| dib8096p_cfg_DibTx(state, 8, 5, 0, 0, 0, 0); |
| reg_1288 |= (1 << 9); break; |
| case DIV_ON_DIBTX: |
| dprintk("SET DIV_OUT ON DIBSTREAM TX"); |
| dib8096p_cfg_DibTx(state, 5, 5, 0, 0, 0, 0); |
| reg_1288 |= (1 << 8); break; |
| case ADC_ON_DIBTX: |
| dprintk("SET ADC_OUT ON DIBSTREAM TX"); |
| dib8096p_cfg_DibTx(state, 20, 5, 10, 0, 0, 0); |
| reg_1288 |= (1 << 7); break; |
| default: |
| break; |
| } |
| dib8000_write_word(state, 1288, reg_1288); |
| } |
| |
| static void dib8096p_setHostBusMux(struct dib8000_state *state, int mode) |
| { |
| u16 reg_1288 = dib8000_read_word(state, 1288) & ~(0x7 << 4); |
| |
| switch (mode) { |
| case DEMOUT_ON_HOSTBUS: |
| dprintk("SET DEM OUT OLD INTERF ON HOST BUS"); |
| dib8096p_enMpegMux(state, 0); |
| reg_1288 |= (1 << 6); |
| break; |
| case DIBTX_ON_HOSTBUS: |
| dprintk("SET DIBSTREAM TX ON HOST BUS"); |
| dib8096p_enMpegMux(state, 0); |
| reg_1288 |= (1 << 5); |
| break; |
| case MPEG_ON_HOSTBUS: |
| dprintk("SET MPEG MUX ON HOST BUS"); |
| reg_1288 |= (1 << 4); |
| break; |
| default: |
| break; |
| } |
| dib8000_write_word(state, 1288, reg_1288); |
| } |
| |
| static int dib8096p_set_diversity_in(struct dvb_frontend *fe, int onoff) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u16 reg_1287; |
| |
| switch (onoff) { |
| case 0: /* only use the internal way - not the diversity input */ |
| dprintk("%s mode OFF : by default Enable Mpeg INPUT", |
| __func__); |
| /* outputRate = 8 */ |
| dib8096p_cfg_DibRx(state, 8, 5, 0, 0, 0, 8, 0); |
| |
| /* Do not divide the serial clock of MPEG MUX in |
| SERIAL MODE in case input mode MPEG is used */ |
| reg_1287 = dib8000_read_word(state, 1287); |
| /* enSerialClkDiv2 == 1 ? */ |
| if ((reg_1287 & 0x1) == 1) { |
| /* force enSerialClkDiv2 = 0 */ |
| reg_1287 &= ~0x1; |
| dib8000_write_word(state, 1287, reg_1287); |
| } |
| state->input_mode_mpeg = 1; |
| break; |
| case 1: /* both ways */ |
| case 2: /* only the diversity input */ |
| dprintk("%s ON : Enable diversity INPUT", __func__); |
| dib8096p_cfg_DibRx(state, 5, 5, 0, 0, 0, 0, 0); |
| state->input_mode_mpeg = 0; |
| break; |
| } |
| |
| dib8000_set_diversity_in(state->fe[0], onoff); |
| return 0; |
| } |
| |
| static int dib8096p_set_output_mode(struct dvb_frontend *fe, int mode) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u16 outreg, smo_mode, fifo_threshold; |
| u8 prefer_mpeg_mux_use = 1; |
| int ret = 0; |
| |
| dib8096p_host_bus_drive(state, 1); |
| |
| fifo_threshold = 1792; |
| smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1); |
| outreg = dib8000_read_word(state, 1286) & |
| ~((1 << 10) | (0x7 << 6) | (1 << 1)); |
| |
| switch (mode) { |
| case OUTMODE_HIGH_Z: |
| outreg = 0; |
| break; |
| |
| case OUTMODE_MPEG2_SERIAL: |
| if (prefer_mpeg_mux_use) { |
| dprintk("dib8096P setting output mode TS_SERIAL using Mpeg Mux"); |
| dib8096p_configMpegMux(state, 3, 1, 1); |
| dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS); |
| } else {/* Use Smooth block */ |
| dprintk("dib8096P setting output mode TS_SERIAL using Smooth bloc"); |
| dib8096p_setHostBusMux(state, |
| DEMOUT_ON_HOSTBUS); |
| outreg |= (2 << 6) | (0 << 1); |
| } |
| break; |
| |
| case OUTMODE_MPEG2_PAR_GATED_CLK: |
| if (prefer_mpeg_mux_use) { |
| dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Mpeg Mux"); |
| dib8096p_configMpegMux(state, 2, 0, 0); |
| dib8096p_setHostBusMux(state, MPEG_ON_HOSTBUS); |
| } else { /* Use Smooth block */ |
| dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Smooth block"); |
| dib8096p_setHostBusMux(state, |
| DEMOUT_ON_HOSTBUS); |
| outreg |= (0 << 6); |
| } |
| break; |
| |
| case OUTMODE_MPEG2_PAR_CONT_CLK: /* Using Smooth block only */ |
| dprintk("dib8096P setting output mode TS_PARALLEL_CONT using Smooth block"); |
| dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS); |
| outreg |= (1 << 6); |
| break; |
| |
| case OUTMODE_MPEG2_FIFO: |
| /* Using Smooth block because not supported |
| by new Mpeg Mux bloc */ |
| dprintk("dib8096P setting output mode TS_FIFO using Smooth block"); |
| dib8096p_setHostBusMux(state, DEMOUT_ON_HOSTBUS); |
| outreg |= (5 << 6); |
| smo_mode |= (3 << 1); |
| fifo_threshold = 512; |
| break; |
| |
| case OUTMODE_DIVERSITY: |
| dprintk("dib8096P setting output mode MODE_DIVERSITY"); |
| dib8096p_setDibTxMux(state, DIV_ON_DIBTX); |
| dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); |
| break; |
| |
| case OUTMODE_ANALOG_ADC: |
| dprintk("dib8096P setting output mode MODE_ANALOG_ADC"); |
| dib8096p_setDibTxMux(state, ADC_ON_DIBTX); |
| dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); |
| break; |
| } |
| |
| if (mode != OUTMODE_HIGH_Z) |
| outreg |= (1<<10); |
| |
| dprintk("output_mpeg2_in_188_bytes = %d", |
| state->cfg.output_mpeg2_in_188_bytes); |
| if (state->cfg.output_mpeg2_in_188_bytes) |
| smo_mode |= (1 << 5); |
| |
| ret |= dib8000_write_word(state, 299, smo_mode); |
| /* synchronous fread */ |
| ret |= dib8000_write_word(state, 299 + 1, fifo_threshold); |
| ret |= dib8000_write_word(state, 1286, outreg); |
| |
| return ret; |
| } |
| |
| static int map_addr_to_serpar_number(struct i2c_msg *msg) |
| { |
| if (msg->buf[0] <= 15) |
| msg->buf[0] -= 1; |
| else if (msg->buf[0] == 17) |
| msg->buf[0] = 15; |
| else if (msg->buf[0] == 16) |
| msg->buf[0] = 17; |
| else if (msg->buf[0] == 19) |
| msg->buf[0] = 16; |
| else if (msg->buf[0] >= 21 && msg->buf[0] <= 25) |
| msg->buf[0] -= 3; |
| else if (msg->buf[0] == 28) |
| msg->buf[0] = 23; |
| else if (msg->buf[0] == 99) |
| msg->buf[0] = 99; |
| else |
| return -EINVAL; |
| return 0; |
| } |
| |
| static int dib8096p_tuner_write_serpar(struct i2c_adapter *i2c_adap, |
| struct i2c_msg msg[], int num) |
| { |
| struct dib8000_state *state = i2c_get_adapdata(i2c_adap); |
| u8 n_overflow = 1; |
| u16 i = 1000; |
| u16 serpar_num = msg[0].buf[0]; |
| |
| while (n_overflow == 1 && i) { |
| n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1; |
| i--; |
| if (i == 0) |
| dprintk("Tuner ITF: write busy (overflow)"); |
| } |
| dib8000_write_word(state, 1985, (1 << 6) | (serpar_num & 0x3f)); |
| dib8000_write_word(state, 1986, (msg[0].buf[1] << 8) | msg[0].buf[2]); |
| |
| return num; |
| } |
| |
| static int dib8096p_tuner_read_serpar(struct i2c_adapter *i2c_adap, |
| struct i2c_msg msg[], int num) |
| { |
| struct dib8000_state *state = i2c_get_adapdata(i2c_adap); |
| u8 n_overflow = 1, n_empty = 1; |
| u16 i = 1000; |
| u16 serpar_num = msg[0].buf[0]; |
| u16 read_word; |
| |
| while (n_overflow == 1 && i) { |
| n_overflow = (dib8000_read_word(state, 1984) >> 1) & 0x1; |
| i--; |
| if (i == 0) |
| dprintk("TunerITF: read busy (overflow)"); |
| } |
| dib8000_write_word(state, 1985, (0<<6) | (serpar_num&0x3f)); |
| |
| i = 1000; |
| while (n_empty == 1 && i) { |
| n_empty = dib8000_read_word(state, 1984)&0x1; |
| i--; |
| if (i == 0) |
| dprintk("TunerITF: read busy (empty)"); |
| } |
| |
| read_word = dib8000_read_word(state, 1987); |
| msg[1].buf[0] = (read_word >> 8) & 0xff; |
| msg[1].buf[1] = (read_word) & 0xff; |
| |
| return num; |
| } |
| |
| static int dib8096p_tuner_rw_serpar(struct i2c_adapter *i2c_adap, |
| struct i2c_msg msg[], int num) |
| { |
| if (map_addr_to_serpar_number(&msg[0]) == 0) { |
| if (num == 1) /* write */ |
| return dib8096p_tuner_write_serpar(i2c_adap, msg, 1); |
| else /* read */ |
| return dib8096p_tuner_read_serpar(i2c_adap, msg, 2); |
| } |
| return num; |
| } |
| |
| static int dib8096p_rw_on_apb(struct i2c_adapter *i2c_adap, |
| struct i2c_msg msg[], int num, u16 apb_address) |
| { |
| struct dib8000_state *state = i2c_get_adapdata(i2c_adap); |
| u16 word; |
| |
| if (num == 1) { /* write */ |
| dib8000_write_word(state, apb_address, |
| ((msg[0].buf[1] << 8) | (msg[0].buf[2]))); |
| } else { |
| word = dib8000_read_word(state, apb_address); |
| msg[1].buf[0] = (word >> 8) & 0xff; |
| msg[1].buf[1] = (word) & 0xff; |
| } |
| return num; |
| } |
| |
| static int dib8096p_tuner_xfer(struct i2c_adapter *i2c_adap, |
| struct i2c_msg msg[], int num) |
| { |
| struct dib8000_state *state = i2c_get_adapdata(i2c_adap); |
| u16 apb_address = 0, word; |
| int i = 0; |
| |
| switch (msg[0].buf[0]) { |
| case 0x12: |
| apb_address = 1920; |
| break; |
| case 0x14: |
| apb_address = 1921; |
| break; |
| case 0x24: |
| apb_address = 1922; |
| break; |
| case 0x1a: |
| apb_address = 1923; |
| break; |
| case 0x22: |
| apb_address = 1924; |
| break; |
| case 0x33: |
| apb_address = 1926; |
| break; |
| case 0x34: |
| apb_address = 1927; |
| break; |
| case 0x35: |
| apb_address = 1928; |
| break; |
| case 0x36: |
| apb_address = 1929; |
| break; |
| case 0x37: |
| apb_address = 1930; |
| break; |
| case 0x38: |
| apb_address = 1931; |
| break; |
| case 0x39: |
| apb_address = 1932; |
| break; |
| case 0x2a: |
| apb_address = 1935; |
| break; |
| case 0x2b: |
| apb_address = 1936; |
| break; |
| case 0x2c: |
| apb_address = 1937; |
| break; |
| case 0x2d: |
| apb_address = 1938; |
| break; |
| case 0x2e: |
| apb_address = 1939; |
| break; |
| case 0x2f: |
| apb_address = 1940; |
| break; |
| case 0x30: |
| apb_address = 1941; |
| break; |
| case 0x31: |
| apb_address = 1942; |
| break; |
| case 0x32: |
| apb_address = 1943; |
| break; |
| case 0x3e: |
| apb_address = 1944; |
| break; |
| case 0x3f: |
| apb_address = 1945; |
| break; |
| case 0x40: |
| apb_address = 1948; |
| break; |
| case 0x25: |
| apb_address = 936; |
| break; |
| case 0x26: |
| apb_address = 937; |
| break; |
| case 0x27: |
| apb_address = 938; |
| break; |
| case 0x28: |
| apb_address = 939; |
| break; |
| case 0x1d: |
| /* get sad sel request */ |
| i = ((dib8000_read_word(state, 921) >> 12)&0x3); |
| word = dib8000_read_word(state, 924+i); |
| msg[1].buf[0] = (word >> 8) & 0xff; |
| msg[1].buf[1] = (word) & 0xff; |
| return num; |
| case 0x1f: |
| if (num == 1) { /* write */ |
| word = (u16) ((msg[0].buf[1] << 8) | |
| msg[0].buf[2]); |
| /* in the VGAMODE Sel are located on bit 0/1 */ |
| word &= 0x3; |
| word = (dib8000_read_word(state, 921) & |
| ~(3<<12)) | (word<<12); |
| /* Set the proper input */ |
| dib8000_write_word(state, 921, word); |
| return num; |
| } |
| } |
| |
| if (apb_address != 0) /* R/W acces via APB */ |
| return dib8096p_rw_on_apb(i2c_adap, msg, num, apb_address); |
| else /* R/W access via SERPAR */ |
| return dib8096p_tuner_rw_serpar(i2c_adap, msg, num); |
| |
| return 0; |
| } |
| |
| static u32 dib8096p_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C; |
| } |
| |
| static struct i2c_algorithm dib8096p_tuner_xfer_algo = { |
| .master_xfer = dib8096p_tuner_xfer, |
| .functionality = dib8096p_i2c_func, |
| }; |
| |
| struct i2c_adapter *dib8096p_get_i2c_tuner(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *st = fe->demodulator_priv; |
| return &st->dib8096p_tuner_adap; |
| } |
| EXPORT_SYMBOL(dib8096p_get_i2c_tuner); |
| |
| int dib8096p_tuner_sleep(struct dvb_frontend *fe, int onoff) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u16 en_cur_state; |
| |
| dprintk("sleep dib8096p: %d", onoff); |
| |
| en_cur_state = dib8000_read_word(state, 1922); |
| |
| /* LNAs and MIX are ON and therefore it is a valid configuration */ |
| if (en_cur_state > 0xff) |
| state->tuner_enable = en_cur_state ; |
| |
| if (onoff) |
| en_cur_state &= 0x00ff; |
| else { |
| if (state->tuner_enable != 0) |
| en_cur_state = state->tuner_enable; |
| } |
| |
| dib8000_write_word(state, 1922, en_cur_state); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dib8096p_tuner_sleep); |
| |
| static const s32 lut_1000ln_mant[] = |
| { |
| 908, 7003, 7090, 7170, 7244, 7313, 7377, 7438, 7495, 7549, 7600 |
| }; |
| |
| s32 dib8000_get_adc_power(struct dvb_frontend *fe, u8 mode) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u32 ix = 0, tmp_val = 0, exp = 0, mant = 0; |
| s32 val; |
| |
| val = dib8000_read32(state, 384); |
| if (mode) { |
| tmp_val = val; |
| while (tmp_val >>= 1) |
| exp++; |
| mant = (val * 1000 / (1<<exp)); |
| ix = (u8)((mant-1000)/100); /* index of the LUT */ |
| val = (lut_1000ln_mant[ix] + 693*(exp-20) - 6908); |
| val = (val*256)/1000; |
| } |
| return val; |
| } |
| EXPORT_SYMBOL(dib8000_get_adc_power); |
| |
| int dib8090p_get_dc_power(struct dvb_frontend *fe, u8 IQ) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| int val = 0; |
| |
| switch (IQ) { |
| case 1: |
| val = dib8000_read_word(state, 403); |
| break; |
| case 0: |
| val = dib8000_read_word(state, 404); |
| break; |
| } |
| if (val & 0x200) |
| val -= 1024; |
| |
| return val; |
| } |
| EXPORT_SYMBOL(dib8090p_get_dc_power); |
| |
| static void dib8000_update_timf(struct dib8000_state *state) |
| { |
| u32 timf = state->timf = dib8000_read32(state, 435); |
| |
| dib8000_write_word(state, 29, (u16) (timf >> 16)); |
| dib8000_write_word(state, 30, (u16) (timf & 0xffff)); |
| dprintk("Updated timing frequency: %d (default: %d)", state->timf, state->timf_default); |
| } |
| |
| u32 dib8000_ctrl_timf(struct dvb_frontend *fe, uint8_t op, uint32_t timf) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| |
| switch (op) { |
| case DEMOD_TIMF_SET: |
| state->timf = timf; |
| break; |
| case DEMOD_TIMF_UPDATE: |
| dib8000_update_timf(state); |
| break; |
| case DEMOD_TIMF_GET: |
| break; |
| } |
| dib8000_set_bandwidth(state->fe[0], 6000); |
| |
| return state->timf; |
| } |
| EXPORT_SYMBOL(dib8000_ctrl_timf); |
| |
| static const u16 adc_target_16dB[11] = { |
| (1 << 13) - 825 - 117, |
| (1 << 13) - 837 - 117, |
| (1 << 13) - 811 - 117, |
| (1 << 13) - 766 - 117, |
| (1 << 13) - 737 - 117, |
| (1 << 13) - 693 - 117, |
| (1 << 13) - 648 - 117, |
| (1 << 13) - 619 - 117, |
| (1 << 13) - 575 - 117, |
| (1 << 13) - 531 - 117, |
| (1 << 13) - 501 - 117 |
| }; |
| static const u8 permu_seg[] = { 6, 5, 7, 4, 8, 3, 9, 2, 10, 1, 11, 0, 12 }; |
| |
| static void dib8000_set_channel(struct dib8000_state *state, u8 seq, u8 autosearching) |
| { |
| u16 mode, max_constellation, seg_diff_mask = 0, nbseg_diff = 0; |
| u8 guard, crate, constellation, timeI; |
| u16 i, coeff[4], P_cfr_left_edge = 0, P_cfr_right_edge = 0, seg_mask13 = 0x1fff; // All 13 segments enabled |
| const s16 *ncoeff = NULL, *ana_fe; |
| u16 tmcc_pow = 0; |
| u16 coff_pow = 0x2800; |
| u16 init_prbs = 0xfff; |
| u16 ana_gain = 0; |
| |
| if (state->revision == 0x8090) |
| dib8000_init_sdram(state); |
| |
| if (state->ber_monitored_layer != LAYER_ALL) |
| dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & 0x60) | state->ber_monitored_layer); |
| else |
| dib8000_write_word(state, 285, dib8000_read_word(state, 285) & 0x60); |
| |
| i = dib8000_read_word(state, 26) & 1; // P_dds_invspec |
| dib8000_write_word(state, 26, state->fe[0]->dtv_property_cache.inversion^i); |
| |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode) { |
| //compute new dds_freq for the seg and adjust prbs |
| int seg_offset = |
| state->fe[0]->dtv_property_cache.isdbt_sb_segment_idx - |
| (state->fe[0]->dtv_property_cache.isdbt_sb_segment_count / 2) - |
| (state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2); |
| int clk = state->cfg.pll->internal; |
| u32 segtodds = ((u32) (430 << 23) / clk) << 3; // segtodds = SegBW / Fclk * pow(2,26) |
| int dds_offset = seg_offset * segtodds; |
| int new_dds, sub_channel; |
| if ((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2) == 0) |
| dds_offset -= (int)(segtodds / 2); |
| |
| if (state->cfg.pll->ifreq == 0) { |
| if ((state->fe[0]->dtv_property_cache.inversion ^ i) == 0) { |
| dib8000_write_word(state, 26, dib8000_read_word(state, 26) | 1); |
| new_dds = dds_offset; |
| } else |
| new_dds = dds_offset; |
| |
| // We shift tuning frequency if the wanted segment is : |
| // - the segment of center frequency with an odd total number of segments |
| // - the segment to the left of center frequency with an even total number of segments |
| // - the segment to the right of center frequency with an even total number of segments |
| if ((state->fe[0]->dtv_property_cache.delivery_system == SYS_ISDBT) |
| && (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) |
| && (((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2) |
| && (state->fe[0]->dtv_property_cache.isdbt_sb_segment_idx == |
| ((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count / 2) + 1))) |
| || (((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2) == 0) |
| && (state->fe[0]->dtv_property_cache.isdbt_sb_segment_idx == (state->fe[0]->dtv_property_cache.isdbt_sb_segment_count / 2))) |
| || (((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2) == 0) |
| && (state->fe[0]->dtv_property_cache.isdbt_sb_segment_idx == |
| ((state->fe[0]->dtv_property_cache.isdbt_sb_segment_count / 2) + 1))) |
| )) { |
| new_dds -= ((u32) (850 << 22) / clk) << 4; // new_dds = 850 (freq shift in KHz) / Fclk * pow(2,26) |
| } |
| } else { |
| if ((state->fe[0]->dtv_property_cache.inversion ^ i) == 0) |
| new_dds = state->cfg.pll->ifreq - dds_offset; |
| else |
| new_dds = state->cfg.pll->ifreq + dds_offset; |
| } |
| dib8000_write_word(state, 27, (u16) ((new_dds >> 16) & 0x01ff)); |
| dib8000_write_word(state, 28, (u16) (new_dds & 0xffff)); |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_segment_count % 2) |
| sub_channel = ((state->fe[0]->dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset) + 1) % 41) / 3; |
| else |
| sub_channel = ((state->fe[0]->dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset)) % 41) / 3; |
| sub_channel -= 6; |
| |
| if (state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K |
| || state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_4K) { |
| dib8000_write_word(state, 219, dib8000_read_word(state, 219) | 0x1); //adp_pass =1 |
| dib8000_write_word(state, 190, dib8000_read_word(state, 190) | (0x1 << 14)); //pha3_force_pha_shift = 1 |
| } else { |
| dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); //adp_pass =0 |
| dib8000_write_word(state, 190, dib8000_read_word(state, 190) & 0xbfff); //pha3_force_pha_shift = 0 |
| } |
| |
| switch (state->fe[0]->dtv_property_cache.transmission_mode) { |
| case TRANSMISSION_MODE_2K: |
| switch (sub_channel) { |
| case -6: |
| init_prbs = 0x0; |
| break; // 41, 0, 1 |
| case -5: |
| init_prbs = 0x423; |
| break; // 02~04 |
| case -4: |
| init_prbs = 0x9; |
| break; // 05~07 |
| case -3: |
| init_prbs = 0x5C7; |
| break; // 08~10 |
| case -2: |
| init_prbs = 0x7A6; |
| break; // 11~13 |
| case -1: |
| init_prbs = 0x3D8; |
| break; // 14~16 |
| case 0: |
| init_prbs = 0x527; |
| break; // 17~19 |
| case 1: |
| init_prbs = 0x7FF; |
| break; // 20~22 |
| case 2: |
| init_prbs = 0x79B; |
| break; // 23~25 |
| case 3: |
| init_prbs = 0x3D6; |
| break; // 26~28 |
| case 4: |
| init_prbs = 0x3A2; |
| break; // 29~31 |
| case 5: |
| init_prbs = 0x53B; |
| break; // 32~34 |
| case 6: |
| init_prbs = 0x2F4; |
| break; // 35~37 |
| default: |
| case 7: |
| init_prbs = 0x213; |
| break; // 38~40 |
| } |
| break; |
| |
| case TRANSMISSION_MODE_4K: |
| switch (sub_channel) { |
| case -6: |
| init_prbs = 0x0; |
| break; // 41, 0, 1 |
| case -5: |
| init_prbs = 0x208; |
| break; // 02~04 |
| case -4: |
| init_prbs = 0xC3; |
| break; // 05~07 |
| case -3: |
| init_prbs = 0x7B9; |
| break; // 08~10 |
| case -2: |
| init_prbs = 0x423; |
| break; // 11~13 |
| case -1: |
| init_prbs = 0x5C7; |
| break; // 14~16 |
| case 0: |
| init_prbs = 0x3D8; |
| break; // 17~19 |
| case 1: |
| init_prbs = 0x7FF; |
| break; // 20~22 |
| case 2: |
| init_prbs = 0x3D6; |
| break; // 23~25 |
| case 3: |
| init_prbs = 0x53B; |
| break; // 26~28 |
| case 4: |
| init_prbs = 0x213; |
| break; // 29~31 |
| case 5: |
| init_prbs = 0x29; |
| break; // 32~34 |
| case 6: |
| init_prbs = 0xD0; |
| break; // 35~37 |
| default: |
| case 7: |
| init_prbs = 0x48E; |
| break; // 38~40 |
| } |
| break; |
| |
| default: |
| case TRANSMISSION_MODE_8K: |
| switch (sub_channel) { |
| case -6: |
| init_prbs = 0x0; |
| break; // 41, 0, 1 |
| case -5: |
| init_prbs = 0x740; |
| break; // 02~04 |
| case -4: |
| init_prbs = 0x069; |
| break; // 05~07 |
| case -3: |
| init_prbs = 0x7DD; |
| break; // 08~10 |
| case -2: |
| init_prbs = 0x208; |
| break; // 11~13 |
| case -1: |
| init_prbs = 0x7B9; |
| break; // 14~16 |
| case 0: |
| init_prbs = 0x5C7; |
| break; // 17~19 |
| case 1: |
| init_prbs = 0x7FF; |
| break; // 20~22 |
| case 2: |
| init_prbs = 0x53B; |
| break; // 23~25 |
| case 3: |
| init_prbs = 0x29; |
| break; // 26~28 |
| case 4: |
| init_prbs = 0x48E; |
| break; // 29~31 |
| case 5: |
| init_prbs = 0x4C4; |
| break; // 32~34 |
| case 6: |
| init_prbs = 0x367; |
| break; // 33~37 |
| default: |
| case 7: |
| init_prbs = 0x684; |
| break; // 38~40 |
| } |
| break; |
| } |
| } else { |
| dib8000_write_word(state, 27, (u16) ((state->cfg.pll->ifreq >> 16) & 0x01ff)); |
| dib8000_write_word(state, 28, (u16) (state->cfg.pll->ifreq & 0xffff)); |
| dib8000_write_word(state, 26, (u16) ((state->cfg.pll->ifreq >> 25) & 0x0003)); |
| } |
| /*P_mode == ?? */ |
| dib8000_write_word(state, 10, (seq << 4)); |
| // dib8000_write_word(state, 287, (dib8000_read_word(state, 287) & 0xe000) | 0x1000); |
| |
| switch (state->fe[0]->dtv_property_cache.guard_interval) { |
| case GUARD_INTERVAL_1_32: |
| guard = 0; |
| break; |
| case GUARD_INTERVAL_1_16: |
| guard = 1; |
| break; |
| case GUARD_INTERVAL_1_8: |
| guard = 2; |
| break; |
| case GUARD_INTERVAL_1_4: |
| default: |
| guard = 3; |
| break; |
| } |
| |
| dib8000_write_word(state, 1, (init_prbs << 2) | (guard & 0x3)); // ADDR 1 |
| |
| max_constellation = DQPSK; |
| for (i = 0; i < 3; i++) { |
| switch (state->fe[0]->dtv_property_cache.layer[i].modulation) { |
| case DQPSK: |
| constellation = 0; |
| break; |
| case QPSK: |
| constellation = 1; |
| break; |
| case QAM_16: |
| constellation = 2; |
| break; |
| case QAM_64: |
| default: |
| constellation = 3; |
| break; |
| } |
| |
| switch (state->fe[0]->dtv_property_cache.layer[i].fec) { |
| case FEC_1_2: |
| crate = 1; |
| break; |
| case FEC_2_3: |
| crate = 2; |
| break; |
| case FEC_3_4: |
| crate = 3; |
| break; |
| case FEC_5_6: |
| crate = 5; |
| break; |
| case FEC_7_8: |
| default: |
| crate = 7; |
| break; |
| } |
| |
| if ((state->fe[0]->dtv_property_cache.layer[i].interleaving > 0) && |
| ((state->fe[0]->dtv_property_cache.layer[i].interleaving <= 3) || |
| (state->fe[0]->dtv_property_cache.layer[i].interleaving == 4 && state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1)) |
| ) |
| timeI = state->fe[0]->dtv_property_cache.layer[i].interleaving; |
| else |
| timeI = 0; |
| dib8000_write_word(state, 2 + i, (constellation << 10) | ((state->fe[0]->dtv_property_cache.layer[i].segment_count & 0xf) << 6) | |
| (crate << 3) | timeI); |
| if (state->fe[0]->dtv_property_cache.layer[i].segment_count > 0) { |
| switch (max_constellation) { |
| case DQPSK: |
| case QPSK: |
| if (state->fe[0]->dtv_property_cache.layer[i].modulation == QAM_16 || |
| state->fe[0]->dtv_property_cache.layer[i].modulation == QAM_64) |
| max_constellation = state->fe[0]->dtv_property_cache.layer[i].modulation; |
| break; |
| case QAM_16: |
| if (state->fe[0]->dtv_property_cache.layer[i].modulation == QAM_64) |
| max_constellation = state->fe[0]->dtv_property_cache.layer[i].modulation; |
| break; |
| } |
| } |
| } |
| |
| mode = fft_to_mode(state); |
| |
| //dib8000_write_word(state, 5, 13); /*p_last_seg = 13*/ |
| |
| dib8000_write_word(state, 274, (dib8000_read_word(state, 274) & 0xffcf) | |
| ((state->fe[0]->dtv_property_cache.isdbt_partial_reception & 1) << 5) | ((state->fe[0]->dtv_property_cache. |
| isdbt_sb_mode & 1) << 4)); |
| |
| dprintk("mode = %d ; guard = %d", mode, state->fe[0]->dtv_property_cache.guard_interval); |
| |
| /* signal optimization parameter */ |
| |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception) { |
| seg_diff_mask = (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK) << permu_seg[0]; |
| for (i = 1; i < 3; i++) |
| nbseg_diff += |
| (state->fe[0]->dtv_property_cache.layer[i].modulation == DQPSK) * state->fe[0]->dtv_property_cache.layer[i].segment_count; |
| for (i = 0; i < nbseg_diff; i++) |
| seg_diff_mask |= 1 << permu_seg[i + 1]; |
| } else { |
| for (i = 0; i < 3; i++) |
| nbseg_diff += |
| (state->fe[0]->dtv_property_cache.layer[i].modulation == DQPSK) * state->fe[0]->dtv_property_cache.layer[i].segment_count; |
| for (i = 0; i < nbseg_diff; i++) |
| seg_diff_mask |= 1 << permu_seg[i]; |
| } |
| dprintk("nbseg_diff = %X (%d)", seg_diff_mask, seg_diff_mask); |
| |
| state->differential_constellation = (seg_diff_mask != 0); |
| if (state->revision != 0x8090) |
| dib8000_set_diversity_in(state->fe[0], state->diversity_onoff); |
| else |
| dib8096p_set_diversity_in(state->fe[0], state->diversity_onoff); |
| |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) { |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 1) |
| seg_mask13 = 0x00E0; |
| else // 1-segment |
| seg_mask13 = 0x0040; |
| } else |
| seg_mask13 = 0x1fff; |
| |
| // WRITE: Mode & Diff mask |
| dib8000_write_word(state, 0, (mode << 13) | seg_diff_mask); |
| |
| if ((seg_diff_mask) || (state->fe[0]->dtv_property_cache.isdbt_sb_mode)) |
| dib8000_write_word(state, 268, (dib8000_read_word(state, 268) & 0xF9FF) | 0x0200); |
| else |
| dib8000_write_word(state, 268, (2 << 9) | 39); //init value |
| |
| // ---- SMALL ---- |
| // P_small_seg_diff |
| dib8000_write_word(state, 352, seg_diff_mask); // ADDR 352 |
| |
| dib8000_write_word(state, 353, seg_mask13); // ADDR 353 |
| |
| /* // P_small_narrow_band=0, P_small_last_seg=13, P_small_offset_num_car=5 */ |
| |
| // ---- SMALL ---- |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) { |
| switch (state->fe[0]->dtv_property_cache.transmission_mode) { |
| case TRANSMISSION_MODE_2K: |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) { |
| if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK) |
| ncoeff = coeff_2k_sb_1seg_dqpsk; |
| else // QPSK or QAM |
| ncoeff = coeff_2k_sb_1seg; |
| } else { // 3-segments |
| if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK) { |
| if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK) |
| ncoeff = coeff_2k_sb_3seg_0dqpsk_1dqpsk; |
| else // QPSK or QAM on external segments |
| ncoeff = coeff_2k_sb_3seg_0dqpsk; |
| } else { // QPSK or QAM on central segment |
| if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK) |
| ncoeff = coeff_2k_sb_3seg_1dqpsk; |
| else // QPSK or QAM on external segments |
| ncoeff = coeff_2k_sb_3seg; |
| } |
| } |
| break; |
| |
| case TRANSMISSION_MODE_4K: |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) { |
| if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK) |
| ncoeff = coeff_4k_sb_1seg_dqpsk; |
| else // QPSK or QAM |
| ncoeff = coeff_4k_sb_1seg; |
| } else { // 3-segments |
| if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK) { |
| if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK) { |
| ncoeff = coeff_4k_sb_3seg_0dqpsk_1dqpsk; |
| } else { // QPSK or QAM on external segments |
| ncoeff = coeff_4k_sb_3seg_0dqpsk; |
| } |
| } else { // QPSK or QAM on central segment |
| if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK) { |
| ncoeff = coeff_4k_sb_3seg_1dqpsk; |
| } else // QPSK or QAM on external segments |
| ncoeff = coeff_4k_sb_3seg; |
| } |
| } |
| break; |
| |
| case TRANSMISSION_MODE_AUTO: |
| case TRANSMISSION_MODE_8K: |
| default: |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) { |
| if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK) |
| ncoeff = coeff_8k_sb_1seg_dqpsk; |
| else // QPSK or QAM |
| ncoeff = coeff_8k_sb_1seg; |
| } else { // 3-segments |
| if (state->fe[0]->dtv_property_cache.layer[0].modulation == DQPSK) { |
| if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK) { |
| ncoeff = coeff_8k_sb_3seg_0dqpsk_1dqpsk; |
| } else { // QPSK or QAM on external segments |
| ncoeff = coeff_8k_sb_3seg_0dqpsk; |
| } |
| } else { // QPSK or QAM on central segment |
| if (state->fe[0]->dtv_property_cache.layer[1].modulation == DQPSK) { |
| ncoeff = coeff_8k_sb_3seg_1dqpsk; |
| } else // QPSK or QAM on external segments |
| ncoeff = coeff_8k_sb_3seg; |
| } |
| } |
| break; |
| } |
| for (i = 0; i < 8; i++) |
| dib8000_write_word(state, 343 + i, ncoeff[i]); |
| } |
| |
| // P_small_coef_ext_enable=ISDB-Tsb, P_small_narrow_band=ISDB-Tsb, P_small_last_seg=13, P_small_offset_num_car=5 |
| dib8000_write_word(state, 351, |
| (state->fe[0]->dtv_property_cache.isdbt_sb_mode << 9) | (state->fe[0]->dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5); |
| |
| // ---- COFF ---- |
| // Carloff, the most robust |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) { |
| |
| // P_coff_cpil_alpha=4, P_coff_inh=0, P_coff_cpil_winlen=64 |
| // P_coff_narrow_band=1, P_coff_square_val=1, P_coff_one_seg=~partial_rcpt, P_coff_use_tmcc=1, P_coff_use_ac=1 |
| dib8000_write_word(state, 187, |
| (4 << 12) | (0 << 11) | (63 << 5) | (0x3 << 3) | ((~state->fe[0]->dtv_property_cache.isdbt_partial_reception & 1) << 2) |
| | 0x3); |
| |
| /* // P_small_coef_ext_enable = 1 */ |
| /* dib8000_write_word(state, 351, dib8000_read_word(state, 351) | 0x200); */ |
| |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) { |
| |
| // P_coff_winlen=63, P_coff_thres_lock=15, P_coff_one_seg_width= (P_mode == 3) , P_coff_one_seg_sym= (P_mode-1) |
| if (mode == 3) |
| dib8000_write_word(state, 180, 0x1fcf | ((mode - 1) << 14)); |
| else |
| dib8000_write_word(state, 180, 0x0fcf | ((mode - 1) << 14)); |
| // P_ctrl_corm_thres4pre_freq_inh=1,P_ctrl_pre_freq_mode_sat=1, |
| // P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 5, P_pre_freq_win_len=4 |
| dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (5 << 5) | 4); |
| // P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8 |
| dib8000_write_word(state, 340, (16 << 6) | (8 << 0)); |
| // P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1 |
| dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0)); |
| |
| // P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k |
| dib8000_write_word(state, 181, 300); |
| dib8000_write_word(state, 182, 150); |
| dib8000_write_word(state, 183, 80); |
| dib8000_write_word(state, 184, 300); |
| dib8000_write_word(state, 185, 150); |
| dib8000_write_word(state, 186, 80); |
| } else { // Sound Broadcasting mode 3 seg |
| // P_coff_one_seg_sym= 1, P_coff_one_seg_width= 1, P_coff_winlen=63, P_coff_thres_lock=15 |
| /* if (mode == 3) */ |
| /* dib8000_write_word(state, 180, 0x2fca | ((0) << 14)); */ |
| /* else */ |
| /* dib8000_write_word(state, 180, 0x2fca | ((1) << 14)); */ |
| dib8000_write_word(state, 180, 0x1fcf | (1 << 14)); |
| |
| // P_ctrl_corm_thres4pre_freq_inh = 1, P_ctrl_pre_freq_mode_sat=1, |
| // P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 4, P_pre_freq_win_len=4 |
| dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (4 << 5) | 4); |
| // P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8 |
| dib8000_write_word(state, 340, (16 << 6) | (8 << 0)); |
| //P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1 |
| dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0)); |
| |
| // P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k |
| dib8000_write_word(state, 181, 350); |
| dib8000_write_word(state, 182, 300); |
| dib8000_write_word(state, 183, 250); |
| dib8000_write_word(state, 184, 350); |
| dib8000_write_word(state, 185, 300); |
| dib8000_write_word(state, 186, 250); |
| } |
| |
| } else if (state->isdbt_cfg_loaded == 0) { // if not Sound Broadcasting mode : put default values for 13 segments |
| dib8000_write_word(state, 180, (16 << 6) | 9); |
| dib8000_write_word(state, 187, (4 << 12) | (8 << 5) | 0x2); |
| coff_pow = 0x2800; |
| for (i = 0; i < 6; i++) |
| dib8000_write_word(state, 181 + i, coff_pow); |
| |
| // P_ctrl_corm_thres4pre_freq_inh=1, P_ctrl_pre_freq_mode_sat=1, |
| // P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 3, P_pre_freq_win_len=1 |
| dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (3 << 5) | 1); |
| |
| // P_ctrl_pre_freq_win_len=8, P_ctrl_pre_freq_thres_lockin=6 |
| dib8000_write_word(state, 340, (8 << 6) | (6 << 0)); |
| // P_ctrl_pre_freq_thres_lockout=4, P_small_use_tmcc/ac/cp=1 |
| dib8000_write_word(state, 341, (4 << 3) | (1 << 2) | (1 << 1) | (1 << 0)); |
| } |
| // ---- FFT ---- |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1 && state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) |
| dib8000_write_word(state, 178, 64); // P_fft_powrange=64 |
| else |
| dib8000_write_word(state, 178, 32); // P_fft_powrange=32 |
| |
| /* make the cpil_coff_lock more robust but slower p_coff_winlen |
| * 6bits; p_coff_thres_lock 6bits (for coff lock if needed) |
| */ |
| /* if ( ( nbseg_diff>0)&&(nbseg_diff<13)) |
| dib8000_write_word(state, 187, (dib8000_read_word(state, 187) & 0xfffb) | (1 << 3)); */ |
| |
| dib8000_write_word(state, 189, ~seg_mask13 | seg_diff_mask); /* P_lmod4_seg_inh */ |
| dib8000_write_word(state, 192, ~seg_mask13 | seg_diff_mask); /* P_pha3_seg_inh */ |
| dib8000_write_word(state, 225, ~seg_mask13 | seg_diff_mask); /* P_tac_seg_inh */ |
| if ((!state->fe[0]->dtv_property_cache.isdbt_sb_mode) && (state->cfg.pll->ifreq == 0)) |
| dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask | 0x40); /* P_equal_noise_seg_inh */ |
| else |
| dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask); /* P_equal_noise_seg_inh */ |
| dib8000_write_word(state, 287, ~seg_mask13 | 0x1000); /* P_tmcc_seg_inh */ |
| //dib8000_write_word(state, 288, ~seg_mask13 | seg_diff_mask); /* P_tmcc_seg_eq_inh */ |
| if (!autosearching) |
| dib8000_write_word(state, 288, (~seg_mask13 | seg_diff_mask) & 0x1fff); /* P_tmcc_seg_eq_inh */ |
| else |
| dib8000_write_word(state, 288, 0x1fff); //disable equalisation of the tmcc when autosearch to be able to find the DQPSK channels. |
| dprintk("287 = %X (%d)", ~seg_mask13 | 0x1000, ~seg_mask13 | 0x1000); |
| |
| dib8000_write_word(state, 211, seg_mask13 & (~seg_diff_mask)); /* P_des_seg_enabled */ |
| |
| /* offset loop parameters */ |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) { |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) |
| /* P_timf_alpha = (11-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */ |
| dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x40); |
| |
| else // Sound Broadcasting mode 3 seg |
| /* P_timf_alpha = (10-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */ |
| dib8000_write_word(state, 32, ((10 - mode) << 12) | (6 << 8) | 0x60); |
| } else |
| // TODO in 13 seg, timf_alpha can always be the same or not ? |
| /* P_timf_alpha = (9-P_mode, P_corm_alpha=6, P_corm_thres=0x80 */ |
| dib8000_write_word(state, 32, ((9 - mode) << 12) | (6 << 8) | 0x80); |
| |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) { |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) |
| /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (11-P_mode) */ |
| dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (10 - mode)); |
| |
| else // Sound Broadcasting mode 3 seg |
| /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (10-P_mode) */ |
| dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (9 - mode)); |
| } else |
| /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = 9 */ |
| dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (8 - mode)); |
| |
| /* P_dvsy_sync_wait - reuse mode */ |
| switch (state->fe[0]->dtv_property_cache.transmission_mode) { |
| case TRANSMISSION_MODE_8K: |
| mode = 256; |
| break; |
| case TRANSMISSION_MODE_4K: |
| mode = 128; |
| break; |
| default: |
| case TRANSMISSION_MODE_2K: |
| mode = 64; |
| break; |
| } |
| if (state->cfg.diversity_delay == 0) |
| mode = (mode * (1 << (guard)) * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo |
| else |
| mode = (mode * (1 << (guard)) * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for DVSY-fifo |
| mode <<= 4; |
| dib8000_write_word(state, 273, (dib8000_read_word(state, 273) & 0x000f) | mode); |
| |
| /* channel estimation fine configuration */ |
| switch (max_constellation) { |
| case QAM_64: |
| ana_gain = 0x7; // -1 : avoid def_est saturation when ADC target is -16dB |
| coeff[0] = 0x0148; /* P_adp_regul_cnt 0.04 */ |
| coeff[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */ |
| coeff[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ |
| coeff[3] = 0xfff8; /* P_adp_noise_ext -0.001 */ |
| //if (!state->cfg.hostbus_diversity) //if diversity, we should prehaps use the configuration of the max_constallation -1 |
| break; |
| case QAM_16: |
| ana_gain = 0x7; // -1 : avoid def_est saturation when ADC target is -16dB |
| coeff[0] = 0x023d; /* P_adp_regul_cnt 0.07 */ |
| coeff[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */ |
| coeff[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ |
| coeff[3] = 0xfff0; /* P_adp_noise_ext -0.002 */ |
| //if (!((state->cfg.hostbus_diversity) && (max_constellation == QAM_16))) |
| break; |
| default: |
| ana_gain = 0; // 0 : goes along with ADC target at -22dB to keep good mobile performance and lock at sensitivity level |
| coeff[0] = 0x099a; /* P_adp_regul_cnt 0.3 */ |
| coeff[1] = 0xffae; /* P_adp_noise_cnt -0.01 */ |
| coeff[2] = 0x0333; /* P_adp_regul_ext 0.1 */ |
| coeff[3] = 0xfff8; /* P_adp_noise_ext -0.002 */ |
| break; |
| } |
| for (mode = 0; mode < 4; mode++) |
| dib8000_write_word(state, 215 + mode, coeff[mode]); |
| |
| // update ana_gain depending on max constellation |
| dib8000_write_word(state, 116, ana_gain); |
| // update ADC target depending on ana_gain |
| if (ana_gain) { // set -16dB ADC target for ana_gain=-1 |
| for (i = 0; i < 10; i++) |
| dib8000_write_word(state, 80 + i, adc_target_16dB[i]); |
| } else { // set -22dB ADC target for ana_gain=0 |
| for (i = 0; i < 10; i++) |
| dib8000_write_word(state, 80 + i, adc_target_16dB[i] - 355); |
| } |
| |
| // ---- ANA_FE ---- |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode) { |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 1) |
| ana_fe = ana_fe_coeff_3seg; |
| else // 1-segment |
| ana_fe = ana_fe_coeff_1seg; |
| } else |
| ana_fe = ana_fe_coeff_13seg; |
| |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1 || state->isdbt_cfg_loaded == 0) |
| for (mode = 0; mode < 24; mode++) |
| dib8000_write_word(state, 117 + mode, ana_fe[mode]); |
| |
| // ---- CHAN_BLK ---- |
| for (i = 0; i < 13; i++) { |
| if ((((~seg_diff_mask) >> i) & 1) == 1) { |
| P_cfr_left_edge += (1 << i) * ((i == 0) || ((((seg_mask13 & (~seg_diff_mask)) >> (i - 1)) & 1) == 0)); |
| P_cfr_right_edge += (1 << i) * ((i == 12) || ((((seg_mask13 & (~seg_diff_mask)) >> (i + 1)) & 1) == 0)); |
| } |
| } |
| dib8000_write_word(state, 222, P_cfr_left_edge); // P_cfr_left_edge |
| dib8000_write_word(state, 223, P_cfr_right_edge); // P_cfr_right_edge |
| // "P_cspu_left_edge" not used => do not care |
| // "P_cspu_right_edge" not used => do not care |
| |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) { |
| dib8000_write_word(state, 228, 1); // P_2d_mode_byp=1 |
| dib8000_write_word(state, 205, dib8000_read_word(state, 205) & 0xfff0); // P_cspu_win_cut = 0 |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0 |
| && state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K) { |
| //dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); // P_adp_pass = 0 |
| dib8000_write_word(state, 265, 15); // P_equal_noise_sel = 15 |
| } |
| } else if (state->isdbt_cfg_loaded == 0) { |
| dib8000_write_word(state, 228, 0); // default value |
| dib8000_write_word(state, 265, 31); // default value |
| dib8000_write_word(state, 205, 0x200f); // init value |
| } |
| // ---- TMCC ---- |
| for (i = 0; i < 3; i++) |
| tmcc_pow += |
| (((state->fe[0]->dtv_property_cache.layer[i].modulation == DQPSK) * 4 + 1) * state->fe[0]->dtv_property_cache.layer[i].segment_count); |
| // Quantif of "P_tmcc_dec_thres_?k" is (0, 5+mode, 9); |
| // Threshold is set at 1/4 of max power. |
| tmcc_pow *= (1 << (9 - 2)); |
| |
| dib8000_write_word(state, 290, tmcc_pow); // P_tmcc_dec_thres_2k |
| dib8000_write_word(state, 291, tmcc_pow); // P_tmcc_dec_thres_4k |
| dib8000_write_word(state, 292, tmcc_pow); // P_tmcc_dec_thres_8k |
| //dib8000_write_word(state, 287, (1 << 13) | 0x1000 ); |
| // ---- PHA3 ---- |
| |
| if (state->isdbt_cfg_loaded == 0) |
| dib8000_write_word(state, 250, 3285); /*p_2d_hspeed_thr0 */ |
| |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) |
| state->isdbt_cfg_loaded = 0; |
| else |
| state->isdbt_cfg_loaded = 1; |
| |
| } |
| |
| static int dib8000_autosearch_start(struct dvb_frontend *fe) |
| { |
| u8 factor; |
| u32 value; |
| struct dib8000_state *state = fe->demodulator_priv; |
| |
| int slist = 0; |
| |
| state->fe[0]->dtv_property_cache.inversion = 0; |
| if (!state->fe[0]->dtv_property_cache.isdbt_sb_mode) |
| state->fe[0]->dtv_property_cache.layer[0].segment_count = 13; |
| state->fe[0]->dtv_property_cache.layer[0].modulation = QAM_64; |
| state->fe[0]->dtv_property_cache.layer[0].fec = FEC_2_3; |
| state->fe[0]->dtv_property_cache.layer[0].interleaving = 0; |
| |
| //choose the right list, in sb, always do everything |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode) { |
| state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K; |
| state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8; |
| slist = 7; |
| dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); |
| } else { |
| if (state->fe[0]->dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) { |
| if (state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) { |
| slist = 7; |
| dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1 to have autosearch start ok with mode2 |
| } else |
| slist = 3; |
| } else { |
| if (state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) { |
| slist = 2; |
| dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1 |
| } else |
| slist = 0; |
| } |
| |
| if (state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) |
| state->fe[0]->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K; |
| if (state->fe[0]->dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) |
| state->fe[0]->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8; |
| |
| dprintk("using list for autosearch : %d", slist); |
| dib8000_set_channel(state, (unsigned char)slist, 1); |
| //dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1 |
| |
| factor = 1; |
| |
| //set lock_mask values |
| dib8000_write_word(state, 6, 0x4); |
| dib8000_write_word(state, 7, 0x8); |
| dib8000_write_word(state, 8, 0x1000); |
| |
| //set lock_mask wait time values |
| value = 50 * state->cfg.pll->internal * factor; |
| dib8000_write_word(state, 11, (u16) ((value >> 16) & 0xffff)); // lock0 wait time |
| dib8000_write_word(state, 12, (u16) (value & 0xffff)); // lock0 wait time |
| value = 100 * state->cfg.pll->internal * factor; |
| dib8000_write_word(state, 13, (u16) ((value >> 16) & 0xffff)); // lock1 wait time |
| dib8000_write_word(state, 14, (u16) (value & 0xffff)); // lock1 wait time |
| value = 1000 * state->cfg.pll->internal * factor; |
| dib8000_write_word(state, 15, (u16) ((value >> 16) & 0xffff)); // lock2 wait time |
| dib8000_write_word(state, 16, (u16) (value & 0xffff)); // lock2 wait time |
| |
| value = dib8000_read_word(state, 0); |
| dib8000_write_word(state, 0, (u16) ((1 << 15) | value)); |
| dib8000_read_word(state, 1284); // reset the INT. n_irq_pending |
| dib8000_write_word(state, 0, (u16) value); |
| |
| } |
| |
| return 0; |
| } |
| |
| static int dib8000_autosearch_irq(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u16 irq_pending = dib8000_read_word(state, 1284); |
| |
| if (irq_pending & 0x1) { // failed |
| dprintk("dib8000_autosearch_irq failed"); |
| return 1; |
| } |
| |
| if (irq_pending & 0x2) { // succeeded |
| dprintk("dib8000_autosearch_irq succeeded"); |
| return 2; |
| } |
| |
| return 0; // still pending |
| } |
| |
| static int dib8000_tune(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| int ret = 0; |
| u16 lock, value, mode = fft_to_mode(state); |
| |
| // we are already tuned - just resuming from suspend |
| if (state == NULL) |
| return -EINVAL; |
| |
| dib8000_set_bandwidth(fe, state->fe[0]->dtv_property_cache.bandwidth_hz / 1000); |
| dib8000_set_channel(state, 0, 0); |
| |
| // restart demod |
| ret |= dib8000_write_word(state, 770, 0x4000); |
| ret |= dib8000_write_word(state, 770, 0x0000); |
| msleep(45); |
| |
| /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3 */ |
| /* ret |= dib8000_write_word(state, 29, (0 << 9) | (4 << 5) | (0 << 4) | (3 << 0) ); workaround inh_isi stays at 1 */ |
| |
| // never achieved a lock before - wait for timfreq to update |
| if (state->timf == 0) { |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) { |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) |
| msleep(300); |
| else // Sound Broadcasting mode 3 seg |
| msleep(500); |
| } else // 13 seg |
| msleep(200); |
| } |
| if (state->fe[0]->dtv_property_cache.isdbt_sb_mode == 1) { |
| if (state->fe[0]->dtv_property_cache.isdbt_partial_reception == 0) { |
| |
| /* P_timf_alpha = (13-P_mode) , P_corm_alpha=6, P_corm_thres=0x40 alpha to check on board */ |
| dib8000_write_word(state, 32, ((13 - mode) << 12) | (6 << 8) | 0x40); |
| //dib8000_write_word(state, 32, (8 << 12) | (6 << 8) | 0x80); |
| |
| /* P_ctrl_sfreq_step= (12-P_mode) P_ctrl_sfreq_inh =0 P_ctrl_pha_off_max */ |
| ret |= dib8000_write_word(state, 37, (12 - mode) | ((5 + mode) << 5)); |
| |
| } else { // Sound Broadcasting mode 3 seg |
| |
| /* P_timf_alpha = (12-P_mode) , P_corm_alpha=6, P_corm_thres=0x60 alpha to check on board */ |
| dib8000_write_word(state, 32, ((12 - mode) << 12) | (6 << 8) | 0x60); |
| |
| ret |= dib8000_write_word(state, 37, (11 - mode) | ((5 + mode) << 5)); |
| } |
| |
| } else { // 13 seg |
| /* P_timf_alpha = 8 , P_corm_alpha=6, P_corm_thres=0x80 alpha to check on board */ |
| dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x80); |
| |
| ret |= dib8000_write_word(state, 37, (10 - mode) | ((5 + mode) << 5)); |
| |
| } |
| |
| // we achieved a coff_cpil_lock - it's time to update the timf |
| if (state->revision != 0x8090) |
| lock = dib8000_read_word(state, 568); |
| else |
| lock = dib8000_read_word(state, 570); |
| if ((lock >> 11) & 0x1) |
| dib8000_update_timf(state); |
| |
| //now that tune is finished, lock0 should lock on fec_mpeg to output this lock on MP_LOCK. It's changed in autosearch start |
| dib8000_write_word(state, 6, 0x200); |
| |
| if (state->revision == 0x8002) { |
| value = dib8000_read_word(state, 903); |
| dib8000_write_word(state, 903, value & ~(1 << 3)); |
| msleep(1); |
| dib8000_write_word(state, 903, value | (1 << 3)); |
| } |
| |
| return ret; |
| } |
| |
| static int dib8000_wakeup(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u8 index_frontend; |
| int ret; |
| |
| dib8000_set_power_mode(state, DIB8000_POWER_ALL); |
| dib8000_set_adc_state(state, DIBX000_ADC_ON); |
| if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0) |
| dprintk("could not start Slow ADC"); |
| |
| if (state->revision != 0x8090) |
| dib8000_sad_calib(state); |
| |
| for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { |
| ret = state->fe[index_frontend]->ops.init(state->fe[index_frontend]); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int dib8000_sleep(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u8 index_frontend; |
| int ret; |
| |
| for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { |
| ret = state->fe[index_frontend]->ops.sleep(state->fe[index_frontend]); |
| if (ret < 0) |
| return ret; |
| } |
| |
| if (state->revision != 0x8090) |
| dib8000_set_output_mode(fe, OUTMODE_HIGH_Z); |
| dib8000_set_power_mode(state, DIB8000_POWER_INTERFACE_ONLY); |
| return dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF) | dib8000_set_adc_state(state, DIBX000_ADC_OFF); |
| } |
| |
| enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| return state->tune_state; |
| } |
| EXPORT_SYMBOL(dib8000_get_tune_state); |
| |
| int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_tune_state tune_state) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| state->tune_state = tune_state; |
| return 0; |
| } |
| EXPORT_SYMBOL(dib8000_set_tune_state); |
| |
| static int dib8000_get_frontend(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u16 i, val = 0; |
| fe_status_t stat; |
| u8 index_frontend, sub_index_frontend; |
| |
| fe->dtv_property_cache.bandwidth_hz = 6000000; |
| |
| for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { |
| state->fe[index_frontend]->ops.read_status(state->fe[index_frontend], &stat); |
| if (stat&FE_HAS_SYNC) { |
| dprintk("TMCC lock on the slave%i", index_frontend); |
| /* synchronize the cache with the other frontends */ |
| state->fe[index_frontend]->ops.get_frontend(state->fe[index_frontend]); |
| for (sub_index_frontend = 0; (sub_index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[sub_index_frontend] != NULL); sub_index_frontend++) { |
| if (sub_index_frontend != index_frontend) { |
| state->fe[sub_index_frontend]->dtv_property_cache.isdbt_sb_mode = state->fe[index_frontend]->dtv_property_cache.isdbt_sb_mode; |
| state->fe[sub_index_frontend]->dtv_property_cache.inversion = state->fe[index_frontend]->dtv_property_cache.inversion; |
| state->fe[sub_index_frontend]->dtv_property_cache.transmission_mode = state->fe[index_frontend]->dtv_property_cache.transmission_mode; |
| state->fe[sub_index_frontend]->dtv_property_cache.guard_interval = state->fe[index_frontend]->dtv_property_cache.guard_interval; |
| state->fe[sub_index_frontend]->dtv_property_cache.isdbt_partial_reception = state->fe[index_frontend]->dtv_property_cache.isdbt_partial_reception; |
| for (i = 0; i < 3; i++) { |
| state->fe[sub_index_frontend]->dtv_property_cache.layer[i].segment_count = state->fe[index_frontend]->dtv_property_cache.layer[i].segment_count; |
| state->fe[sub_index_frontend]->dtv_property_cache.layer[i].interleaving = state->fe[index_frontend]->dtv_property_cache.layer[i].interleaving; |
| state->fe[sub_index_frontend]->dtv_property_cache.layer[i].fec = state->fe[index_frontend]->dtv_property_cache.layer[i].fec; |
| state->fe[sub_index_frontend]->dtv_property_cache.layer[i].modulation = state->fe[index_frontend]->dtv_property_cache.layer[i].modulation; |
| } |
| } |
| } |
| return 0; |
| } |
| } |
| |
| fe->dtv_property_cache.isdbt_sb_mode = dib8000_read_word(state, 508) & 0x1; |
| |
| if (state->revision == 0x8090) |
| val = dib8000_read_word(state, 572); |
| else |
| val = dib8000_read_word(state, 570); |
| fe->dtv_property_cache.inversion = (val & 0x40) >> 6; |
| switch ((val & 0x30) >> 4) { |
| case 1: |
| fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_2K; |
| break; |
| case 3: |
| default: |
| fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K; |
| break; |
| } |
| |
| switch (val & 0x3) { |
| case 0: |
| fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_32; |
| dprintk("dib8000_get_frontend GI = 1/32 "); |
| break; |
| case 1: |
| fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_16; |
| dprintk("dib8000_get_frontend GI = 1/16 "); |
| break; |
| case 2: |
| dprintk("dib8000_get_frontend GI = 1/8 "); |
| fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8; |
| break; |
| case 3: |
| dprintk("dib8000_get_frontend GI = 1/4 "); |
| fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_4; |
| break; |
| } |
| |
| val = dib8000_read_word(state, 505); |
| fe->dtv_property_cache.isdbt_partial_reception = val & 1; |
| dprintk("dib8000_get_frontend : partial_reception = %d ", fe->dtv_property_cache.isdbt_partial_reception); |
| |
| for (i = 0; i < 3; i++) { |
| val = dib8000_read_word(state, 493 + i); |
| fe->dtv_property_cache.layer[i].segment_count = val & 0x0F; |
| dprintk("dib8000_get_frontend : Layer %d segments = %d ", i, fe->dtv_property_cache.layer[i].segment_count); |
| |
| val = dib8000_read_word(state, 499 + i); |
| fe->dtv_property_cache.layer[i].interleaving = val & 0x3; |
| dprintk("dib8000_get_frontend : Layer %d time_intlv = %d ", i, fe->dtv_property_cache.layer[i].interleaving); |
| |
| val = dib8000_read_word(state, 481 + i); |
| switch (val & 0x7) { |
| case 1: |
| fe->dtv_property_cache.layer[i].fec = FEC_1_2; |
| dprintk("dib8000_get_frontend : Layer %d Code Rate = 1/2 ", i); |
| break; |
| case 2: |
| fe->dtv_property_cache.layer[i].fec = FEC_2_3; |
| dprintk("dib8000_get_frontend : Layer %d Code Rate = 2/3 ", i); |
| break; |
| case 3: |
| fe->dtv_property_cache.layer[i].fec = FEC_3_4; |
| dprintk("dib8000_get_frontend : Layer %d Code Rate = 3/4 ", i); |
| break; |
| case 5: |
| fe->dtv_property_cache.layer[i].fec = FEC_5_6; |
| dprintk("dib8000_get_frontend : Layer %d Code Rate = 5/6 ", i); |
| break; |
| default: |
| fe->dtv_property_cache.layer[i].fec = FEC_7_8; |
| dprintk("dib8000_get_frontend : Layer %d Code Rate = 7/8 ", i); |
| break; |
| } |
| |
| val = dib8000_read_word(state, 487 + i); |
| switch (val & 0x3) { |
| case 0: |
| dprintk("dib8000_get_frontend : Layer %d DQPSK ", i); |
| fe->dtv_property_cache.layer[i].modulation = DQPSK; |
| break; |
| case 1: |
| fe->dtv_property_cache.layer[i].modulation = QPSK; |
| dprintk("dib8000_get_frontend : Layer %d QPSK ", i); |
| break; |
| case 2: |
| fe->dtv_property_cache.layer[i].modulation = QAM_16; |
| dprintk("dib8000_get_frontend : Layer %d QAM16 ", i); |
| break; |
| case 3: |
| default: |
| dprintk("dib8000_get_frontend : Layer %d QAM64 ", i); |
| fe->dtv_property_cache.layer[i].modulation = QAM_64; |
| break; |
| } |
| } |
| |
| /* synchronize the cache with the other frontends */ |
| for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { |
| state->fe[index_frontend]->dtv_property_cache.isdbt_sb_mode = fe->dtv_property_cache.isdbt_sb_mode; |
| state->fe[index_frontend]->dtv_property_cache.inversion = fe->dtv_property_cache.inversion; |
| state->fe[index_frontend]->dtv_property_cache.transmission_mode = fe->dtv_property_cache.transmission_mode; |
| state->fe[index_frontend]->dtv_property_cache.guard_interval = fe->dtv_property_cache.guard_interval; |
| state->fe[index_frontend]->dtv_property_cache.isdbt_partial_reception = fe->dtv_property_cache.isdbt_partial_reception; |
| for (i = 0; i < 3; i++) { |
| state->fe[index_frontend]->dtv_property_cache.layer[i].segment_count = fe->dtv_property_cache.layer[i].segment_count; |
| state->fe[index_frontend]->dtv_property_cache.layer[i].interleaving = fe->dtv_property_cache.layer[i].interleaving; |
| state->fe[index_frontend]->dtv_property_cache.layer[i].fec = fe->dtv_property_cache.layer[i].fec; |
| state->fe[index_frontend]->dtv_property_cache.layer[i].modulation = fe->dtv_property_cache.layer[i].modulation; |
| } |
| } |
| return 0; |
| } |
| |
| static int dib8000_set_frontend(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u8 nbr_pending, exit_condition, index_frontend; |
| s8 index_frontend_success = -1; |
| int time, ret; |
| int time_slave = FE_CALLBACK_TIME_NEVER; |
| |
| if (state->fe[0]->dtv_property_cache.frequency == 0) { |
| dprintk("dib8000: must at least specify frequency "); |
| return 0; |
| } |
| |
| if (state->fe[0]->dtv_property_cache.bandwidth_hz == 0) { |
| dprintk("dib8000: no bandwidth specified, set to default "); |
| state->fe[0]->dtv_property_cache.bandwidth_hz = 6000000; |
| } |
| |
| for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { |
| /* synchronization of the cache */ |
| state->fe[index_frontend]->dtv_property_cache.delivery_system = SYS_ISDBT; |
| memcpy(&state->fe[index_frontend]->dtv_property_cache, &fe->dtv_property_cache, sizeof(struct dtv_frontend_properties)); |
| |
| if (state->revision != 0x8090) |
| dib8000_set_output_mode(state->fe[index_frontend], |
| OUTMODE_HIGH_Z); |
| else |
| dib8096p_set_output_mode(state->fe[index_frontend], |
| OUTMODE_HIGH_Z); |
| if (state->fe[index_frontend]->ops.tuner_ops.set_params) |
| state->fe[index_frontend]->ops.tuner_ops.set_params(state->fe[index_frontend]); |
| |
| dib8000_set_tune_state(state->fe[index_frontend], CT_AGC_START); |
| } |
| |
| /* start up the AGC */ |
| do { |
| time = dib8000_agc_startup(state->fe[0]); |
| for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { |
| time_slave = dib8000_agc_startup(state->fe[index_frontend]); |
| if (time == FE_CALLBACK_TIME_NEVER) |
| time = time_slave; |
| else if ((time_slave != FE_CALLBACK_TIME_NEVER) && (time_slave > time)) |
| time = time_slave; |
| } |
| if (time != FE_CALLBACK_TIME_NEVER) |
| msleep(time / 10); |
| else |
| break; |
| exit_condition = 1; |
| for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { |
| if (dib8000_get_tune_state(state->fe[index_frontend]) != CT_AGC_STOP) { |
| exit_condition = 0; |
| break; |
| } |
| } |
| } while (exit_condition == 0); |
| |
| for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) |
| dib8000_set_tune_state(state->fe[index_frontend], CT_DEMOD_START); |
| |
| if ((state->fe[0]->dtv_property_cache.delivery_system != SYS_ISDBT) || |
| (state->fe[0]->dtv_property_cache.inversion == INVERSION_AUTO) || |
| (state->fe[0]->dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) || |
| (state->fe[0]->dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) || |
| (((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (1 << 0)) != 0) && |
| (state->fe[0]->dtv_property_cache.layer[0].segment_count != 0xff) && |
| (state->fe[0]->dtv_property_cache.layer[0].segment_count != 0) && |
| ((state->fe[0]->dtv_property_cache.layer[0].modulation == QAM_AUTO) || |
| (state->fe[0]->dtv_property_cache.layer[0].fec == FEC_AUTO))) || |
| (((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (1 << 1)) != 0) && |
| (state->fe[0]->dtv_property_cache.layer[1].segment_count != 0xff) && |
| (state->fe[0]->dtv_property_cache.layer[1].segment_count != 0) && |
| ((state->fe[0]->dtv_property_cache.layer[1].modulation == QAM_AUTO) || |
| (state->fe[0]->dtv_property_cache.layer[1].fec == FEC_AUTO))) || |
| (((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (1 << 2)) != 0) && |
| (state->fe[0]->dtv_property_cache.layer[2].segment_count != 0xff) && |
| (state->fe[0]->dtv_property_cache.layer[2].segment_count != 0) && |
| ((state->fe[0]->dtv_property_cache.layer[2].modulation == QAM_AUTO) || |
| (state->fe[0]->dtv_property_cache.layer[2].fec == FEC_AUTO))) || |
| (((state->fe[0]->dtv_property_cache.layer[0].segment_count == 0) || |
| ((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (1 << 0)) == 0)) && |
| ((state->fe[0]->dtv_property_cache.layer[1].segment_count == 0) || |
| ((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (2 << 0)) == 0)) && |
| ((state->fe[0]->dtv_property_cache.layer[2].segment_count == 0) || ((state->fe[0]->dtv_property_cache.isdbt_layer_enabled & (3 << 0)) == 0)))) { |
| int i = 100; |
| u8 found = 0; |
| u8 tune_failed = 0; |
| |
| for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { |
| dib8000_set_bandwidth(state->fe[index_frontend], fe->dtv_property_cache.bandwidth_hz / 1000); |
| dib8000_autosearch_start(state->fe[index_frontend]); |
| } |
| |
| do { |
| msleep(20); |
| nbr_pending = 0; |
| exit_condition = 0; /* 0: tune pending; 1: tune failed; 2:tune success */ |
| for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { |
| if (((tune_failed >> index_frontend) & 0x1) == 0) { |
| found = dib8000_autosearch_irq(state->fe[index_frontend]); |
| switch (found) { |
| case 0: /* tune pending */ |
| nbr_pending++; |
| break; |
| case 2: |
| dprintk("autosearch succeed on the frontend%i", index_frontend); |
| exit_condition = 2; |
| index_frontend_success = index_frontend; |
| break; |
| default: |
| dprintk("unhandled autosearch result"); |
| case 1: |
| tune_failed |= (1 << index_frontend); |
| dprintk("autosearch failed for the frontend%i", index_frontend); |
| break; |
| } |
| } |
| } |
| |
| /* if all tune are done and no success, exit: tune failed */ |
| if ((nbr_pending == 0) && (exit_condition == 0)) |
| exit_condition = 1; |
| } while ((exit_condition == 0) && i--); |
| |
| if (exit_condition == 1) { /* tune failed */ |
| dprintk("tune failed"); |
| return 0; |
| } |
| |
| dprintk("tune success on frontend%i", index_frontend_success); |
| |
| dib8000_get_frontend(fe); |
| } |
| |
| for (index_frontend = 0, ret = 0; (ret >= 0) && (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) |
| ret = dib8000_tune(state->fe[index_frontend]); |
| |
| /* set output mode and diversity input */ |
| if (state->revision != 0x8090) { |
| dib8000_set_output_mode(state->fe[0], state->cfg.output_mode); |
| for (index_frontend = 1; |
| (index_frontend < MAX_NUMBER_OF_FRONTENDS) && |
| (state->fe[index_frontend] != NULL); |
| index_frontend++) { |
| dib8000_set_output_mode(state->fe[index_frontend], |
| OUTMODE_DIVERSITY); |
| dib8000_set_diversity_in(state->fe[index_frontend-1], 1); |
| } |
| |
| /* turn off the diversity of the last chip */ |
| dib8000_set_diversity_in(state->fe[index_frontend-1], 0); |
| } else { |
| dib8096p_set_output_mode(state->fe[0], state->cfg.output_mode); |
| if (state->cfg.enMpegOutput == 0) { |
| dib8096p_setDibTxMux(state, MPEG_ON_DIBTX); |
| dib8096p_setHostBusMux(state, DIBTX_ON_HOSTBUS); |
| } |
| for (index_frontend = 1; |
| (index_frontend < MAX_NUMBER_OF_FRONTENDS) && |
| (state->fe[index_frontend] != NULL); |
| index_frontend++) { |
| dib8096p_set_output_mode(state->fe[index_frontend], |
| OUTMODE_DIVERSITY); |
| dib8096p_set_diversity_in(state->fe[index_frontend-1], 1); |
| } |
| |
| /* turn off the diversity of the last chip */ |
| dib8096p_set_diversity_in(state->fe[index_frontend-1], 0); |
| } |
| |
| return ret; |
| } |
| |
| static u16 dib8000_read_lock(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| |
| if (state->revision == 0x8090) |
| return dib8000_read_word(state, 570); |
| return dib8000_read_word(state, 568); |
| } |
| |
| static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u16 lock_slave = 0, lock; |
| u8 index_frontend; |
| |
| if (state->revision == 0x8090) |
| lock = dib8000_read_word(state, 570); |
| else |
| lock = dib8000_read_word(state, 568); |
| |
| for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) |
| lock_slave |= dib8000_read_lock(state->fe[index_frontend]); |
| |
| *stat = 0; |
| |
| if (((lock >> 13) & 1) || ((lock_slave >> 13) & 1)) |
| *stat |= FE_HAS_SIGNAL; |
| |
| if (((lock >> 8) & 1) || ((lock_slave >> 8) & 1)) /* Equal */ |
| *stat |= FE_HAS_CARRIER; |
| |
| if ((((lock >> 1) & 0xf) == 0xf) || (((lock_slave >> 1) & 0xf) == 0xf)) /* TMCC_SYNC */ |
| *stat |= FE_HAS_SYNC; |
| |
| if ((((lock >> 12) & 1) || ((lock_slave >> 12) & 1)) && ((lock >> 5) & 7)) /* FEC MPEG */ |
| *stat |= FE_HAS_LOCK; |
| |
| if (((lock >> 12) & 1) || ((lock_slave >> 12) & 1)) { |
| lock = dib8000_read_word(state, 554); /* Viterbi Layer A */ |
| if (lock & 0x01) |
| *stat |= FE_HAS_VITERBI; |
| |
| lock = dib8000_read_word(state, 555); /* Viterbi Layer B */ |
| if (lock & 0x01) |
| *stat |= FE_HAS_VITERBI; |
| |
| lock = dib8000_read_word(state, 556); /* Viterbi Layer C */ |
| if (lock & 0x01) |
| *stat |= FE_HAS_VITERBI; |
| } |
| |
| return 0; |
| } |
| |
| static int dib8000_read_ber(struct dvb_frontend *fe, u32 * ber) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| |
| /* 13 segments */ |
| if (state->revision == 0x8090) |
| *ber = (dib8000_read_word(state, 562) << 16) | |
| dib8000_read_word(state, 563); |
| else |
| *ber = (dib8000_read_word(state, 560) << 16) | |
| dib8000_read_word(state, 561); |
| return 0; |
| } |
| |
| static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| |
| /* packet error on 13 seg */ |
| if (state->revision == 0x8090) |
| *unc = dib8000_read_word(state, 567); |
| else |
| *unc = dib8000_read_word(state, 565); |
| return 0; |
| } |
| |
| static int dib8000_read_signal_strength(struct dvb_frontend *fe, u16 * strength) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u8 index_frontend; |
| u16 val; |
| |
| *strength = 0; |
| for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) { |
| state->fe[index_frontend]->ops.read_signal_strength(state->fe[index_frontend], &val); |
| if (val > 65535 - *strength) |
| *strength = 65535; |
| else |
| *strength += val; |
| } |
| |
| val = 65535 - dib8000_read_word(state, 390); |
| if (val > 65535 - *strength) |
| *strength = 65535; |
| else |
| *strength += val; |
| return 0; |
| } |
| |
| static u32 dib8000_get_snr(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u32 n, s, exp; |
| u16 val; |
| |
| if (state->revision != 0x8090) |
| val = dib8000_read_word(state, 542); |
| else |
| val = dib8000_read_word(state, 544); |
| n = (val >> 6) & 0xff; |
| exp = (val & 0x3f); |
| if ((exp & 0x20) != 0) |
| exp -= 0x40; |
| n <<= exp+16; |
| |
| if (state->revision != 0x8090) |
| val = dib8000_read_word(state, 543); |
| else |
| val = dib8000_read_word(state, 545); |
| s = (val >> 6) & 0xff; |
| exp = (val & 0x3f); |
| if ((exp & 0x20) != 0) |
| exp -= 0x40; |
| s <<= exp+16; |
| |
| if (n > 0) { |
| u32 t = (s/n) << 16; |
| return t + ((s << 16) - n*t) / n; |
| } |
| return 0xffffffff; |
| } |
| |
| static int dib8000_read_snr(struct dvb_frontend *fe, u16 * snr) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u8 index_frontend; |
| u32 snr_master; |
| |
| snr_master = dib8000_get_snr(fe); |
| for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) |
| snr_master += dib8000_get_snr(state->fe[index_frontend]); |
| |
| if ((snr_master >> 16) != 0) { |
| snr_master = 10*intlog10(snr_master>>16); |
| *snr = snr_master / ((1 << 24) / 10); |
| } |
| else |
| *snr = 0; |
| |
| return 0; |
| } |
| |
| int dib8000_set_slave_frontend(struct dvb_frontend *fe, struct dvb_frontend *fe_slave) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u8 index_frontend = 1; |
| |
| while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL)) |
| index_frontend++; |
| if (index_frontend < MAX_NUMBER_OF_FRONTENDS) { |
| dprintk("set slave fe %p to index %i", fe_slave, index_frontend); |
| state->fe[index_frontend] = fe_slave; |
| return 0; |
| } |
| |
| dprintk("too many slave frontend"); |
| return -ENOMEM; |
| } |
| EXPORT_SYMBOL(dib8000_set_slave_frontend); |
| |
| int dib8000_remove_slave_frontend(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| u8 index_frontend = 1; |
| |
| while ((index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL)) |
| index_frontend++; |
| if (index_frontend != 1) { |
| dprintk("remove slave fe %p (index %i)", state->fe[index_frontend-1], index_frontend-1); |
| state->fe[index_frontend] = NULL; |
| return 0; |
| } |
| |
| dprintk("no frontend to be removed"); |
| return -ENODEV; |
| } |
| EXPORT_SYMBOL(dib8000_remove_slave_frontend); |
| |
| struct dvb_frontend *dib8000_get_slave_frontend(struct dvb_frontend *fe, int slave_index) |
| { |
| struct dib8000_state *state = fe->demodulator_priv; |
| |
| if (slave_index >= MAX_NUMBER_OF_FRONTENDS) |
| return NULL; |
| return state->fe[slave_index]; |
| } |
| EXPORT_SYMBOL(dib8000_get_slave_frontend); |
| |
| |
| int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, |
| u8 default_addr, u8 first_addr, u8 is_dib8096p) |
| { |
| int k = 0, ret = 0; |
| u8 new_addr = 0; |
| struct i2c_device client = {.adap = host }; |
| |
| client.i2c_write_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL); |
| if (!client.i2c_write_buffer) { |
| dprintk("%s: not enough memory", __func__); |
| return -ENOMEM; |
| } |
| client.i2c_read_buffer = kzalloc(4 * sizeof(u8), GFP_KERNEL); |
| if (!client.i2c_read_buffer) { |
| dprintk("%s: not enough memory", __func__); |
| ret = -ENOMEM; |
| goto error_memory_read; |
| } |
| client.i2c_buffer_lock = kzalloc(sizeof(struct mutex), GFP_KERNEL); |
| if (!client.i2c_buffer_lock) { |
| dprintk("%s: not enough memory", __func__); |
| ret = -ENOMEM; |
| goto error_memory_lock; |
| } |
| mutex_init(client.i2c_buffer_lock); |
| |
| for (k = no_of_demods - 1; k >= 0; k--) { |
| /* designated i2c address */ |
| new_addr = first_addr + (k << 1); |
| |
| client.addr = new_addr; |
| if (!is_dib8096p) |
| dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */ |
| if (dib8000_identify(&client) == 0) { |
| /* sram lead in, rdy */ |
| if (!is_dib8096p) |
| dib8000_i2c_write16(&client, 1287, 0x0003); |
| client.addr = default_addr; |
| if (dib8000_identify(&client) == 0) { |
| dprintk("#%d: not identified", k); |
| ret = -EINVAL; |
| goto error; |
| } |
| } |
| |
| /* start diversity to pull_down div_str - just for i2c-enumeration */ |
| dib8000_i2c_write16(&client, 1286, (1 << 10) | (4 << 6)); |
| |
| /* set new i2c address and force divstart */ |
| dib8000_i2c_write16(&client, 1285, (new_addr << 2) | 0x2); |
| client.addr = new_addr; |
| dib8000_identify(&client); |
| |
| dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr); |
| } |
| |
| for (k = 0; k < no_of_demods; k++) { |
| new_addr = first_addr | (k << 1); |
| client.addr = new_addr; |
| |
| // unforce divstr |
| dib8000_i2c_write16(&client, 1285, new_addr << 2); |
| |
| /* deactivate div - it was just for i2c-enumeration */ |
| dib8000_i2c_write16(&client, 1286, 0); |
| } |
| |
| error: |
| kfree(client.i2c_buffer_lock); |
| error_memory_lock: |
| kfree(client.i2c_read_buffer); |
| error_memory_read: |
| kfree(client.i2c_write_buffer); |
| |
| return ret; |
| } |
| |
| EXPORT_SYMBOL(dib8000_i2c_enumeration); |
| static int dib8000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune) |
| { |
| tune->min_delay_ms = 1000; |
| tune->step_size = 0; |
| tune->max_drift = 0; |
| return 0; |
| } |
| |
| static void dib8000_release(struct dvb_frontend *fe) |
| { |
| struct dib8000_state *st = fe->demodulator_priv; |
| u8 index_frontend; |
| |
| for (index_frontend = 1; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (st->fe[index_frontend] != NULL); index_frontend++) |
| dvb_frontend_detach(st->fe[index_frontend]); |
| |
| dibx000_exit_i2c_master(&st->i2c_master); |
| i2c_del_adapter(&st->dib8096p_tuner_adap); |
| kfree(st->fe[0]); |
| kfree(st); |
| } |
| |
| struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating) |
| { |
| struct dib8000_state *st = fe->demodulator_priv; |
| return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating); |
| } |
| |
| EXPORT_SYMBOL(dib8000_get_i2c_master); |
| |
| int dib8000_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff) |
| { |
| struct dib8000_state *st = fe->demodulator_priv; |
| u16 val = dib8000_read_word(st, 299) & 0xffef; |
| val |= (onoff & 0x1) << 4; |
| |
| dprintk("pid filter enabled %d", onoff); |
| return dib8000_write_word(st, 299, val); |
| } |
| EXPORT_SYMBOL(dib8000_pid_filter_ctrl); |
| |
| int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff) |
| { |
| struct dib8000_state *st = fe->demodulator_priv; |
| dprintk("Index %x, PID %d, OnOff %d", id, pid, onoff); |
| return dib8000_write_word(st, 305 + id, onoff ? (1 << 13) | pid : 0); |
| } |
| EXPORT_SYMBOL(dib8000_pid_filter); |
| |
| static const struct dvb_frontend_ops dib8000_ops = { |
| .delsys = { SYS_ISDBT }, |
| .info = { |
| .name = "DiBcom 8000 ISDB-T", |
| .frequency_min = 44250000, |
| .frequency_max = 867250000, |
| .frequency_stepsize = 62500, |
| .caps = FE_CAN_INVERSION_AUTO | |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO, |
| }, |
| |
| .release = dib8000_release, |
| |
| .init = dib8000_wakeup, |
| .sleep = dib8000_sleep, |
| |
| .set_frontend = dib8000_set_frontend, |
| .get_tune_settings = dib8000_fe_get_tune_settings, |
| .get_frontend = dib8000_get_frontend, |
| |
| .read_status = dib8000_read_status, |
| .read_ber = dib8000_read_ber, |
| .read_signal_strength = dib8000_read_signal_strength, |
| .read_snr = dib8000_read_snr, |
| .read_ucblocks = dib8000_read_unc_blocks, |
| }; |
| |
| struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg) |
| { |
| struct dvb_frontend *fe; |
| struct dib8000_state *state; |
| |
| dprintk("dib8000_attach"); |
| |
| state = kzalloc(sizeof(struct dib8000_state), GFP_KERNEL); |
| if (state == NULL) |
| return NULL; |
| fe = kzalloc(sizeof(struct dvb_frontend), GFP_KERNEL); |
| if (fe == NULL) |
| goto error; |
| |
| memcpy(&state->cfg, cfg, sizeof(struct dib8000_config)); |
| state->i2c.adap = i2c_adap; |
| state->i2c.addr = i2c_addr; |
| state->i2c.i2c_write_buffer = state->i2c_write_buffer; |
| state->i2c.i2c_read_buffer = state->i2c_read_buffer; |
| mutex_init(&state->i2c_buffer_lock); |
| state->i2c.i2c_buffer_lock = &state->i2c_buffer_lock; |
| state->gpio_val = cfg->gpio_val; |
| state->gpio_dir = cfg->gpio_dir; |
| |
| /* Ensure the output mode remains at the previous default if it's |
| * not specifically set by the caller. |
| */ |
| if ((state->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (state->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK)) |
| state->cfg.output_mode = OUTMODE_MPEG2_FIFO; |
| |
| state->fe[0] = fe; |
| fe->demodulator_priv = state; |
| memcpy(&state->fe[0]->ops, &dib8000_ops, sizeof(struct dvb_frontend_ops)); |
| |
| state->timf_default = cfg->pll->timf; |
| |
| if (dib8000_identify(&state->i2c) == 0) |
| goto error; |
| |
| dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr); |
| |
| /* init 8096p tuner adapter */ |
| strncpy(state->dib8096p_tuner_adap.name, "DiB8096P tuner interface", |
| sizeof(state->dib8096p_tuner_adap.name)); |
| state->dib8096p_tuner_adap.algo = &dib8096p_tuner_xfer_algo; |
| state->dib8096p_tuner_adap.algo_data = NULL; |
| state->dib8096p_tuner_adap.dev.parent = state->i2c.adap->dev.parent; |
| i2c_set_adapdata(&state->dib8096p_tuner_adap, state); |
| i2c_add_adapter(&state->dib8096p_tuner_adap); |
| |
| dib8000_reset(fe); |
| |
| dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5)); /* ber_rs_len = 3 */ |
| |
| return fe; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| |
| EXPORT_SYMBOL(dib8000_attach); |
| |
| MODULE_AUTHOR("Olivier Grenie <Olivier.Grenie@dibcom.fr, " "Patrick Boettcher <pboettcher@dibcom.fr>"); |
| MODULE_DESCRIPTION("Driver for the DiBcom 8000 ISDB-T demodulator"); |
| MODULE_LICENSE("GPL"); |