| /* |
| * Link physical devices with ACPI devices support |
| * |
| * Copyright (c) 2005 David Shaohua Li <shaohua.li@intel.com> |
| * Copyright (c) 2005 Intel Corp. |
| * |
| * This file is released under the GPLv2. |
| */ |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/device.h> |
| #include <linux/rwsem.h> |
| #include <linux/acpi.h> |
| |
| #define ACPI_GLUE_DEBUG 0 |
| #if ACPI_GLUE_DEBUG |
| #define DBG(x...) printk(PREFIX x) |
| #else |
| #define DBG(x...) do { } while(0) |
| #endif |
| static LIST_HEAD(bus_type_list); |
| static DECLARE_RWSEM(bus_type_sem); |
| |
| int register_acpi_bus_type(struct acpi_bus_type *type) |
| { |
| if (acpi_disabled) |
| return -ENODEV; |
| if (type && type->bus && type->find_device) { |
| down_write(&bus_type_sem); |
| list_add_tail(&type->list, &bus_type_list); |
| up_write(&bus_type_sem); |
| printk(KERN_INFO PREFIX "bus type %s registered\n", |
| type->bus->name); |
| return 0; |
| } |
| return -ENODEV; |
| } |
| |
| int unregister_acpi_bus_type(struct acpi_bus_type *type) |
| { |
| if (acpi_disabled) |
| return 0; |
| if (type) { |
| down_write(&bus_type_sem); |
| list_del_init(&type->list); |
| up_write(&bus_type_sem); |
| printk(KERN_INFO PREFIX "ACPI bus type %s unregistered\n", |
| type->bus->name); |
| return 0; |
| } |
| return -ENODEV; |
| } |
| |
| static struct acpi_bus_type *acpi_get_bus_type(struct bus_type *type) |
| { |
| struct acpi_bus_type *tmp, *ret = NULL; |
| |
| down_read(&bus_type_sem); |
| list_for_each_entry(tmp, &bus_type_list, list) { |
| if (tmp->bus == type) { |
| ret = tmp; |
| break; |
| } |
| } |
| up_read(&bus_type_sem); |
| return ret; |
| } |
| |
| static int acpi_find_bridge_device(struct device *dev, acpi_handle * handle) |
| { |
| struct acpi_bus_type *tmp; |
| int ret = -ENODEV; |
| |
| down_read(&bus_type_sem); |
| list_for_each_entry(tmp, &bus_type_list, list) { |
| if (tmp->find_bridge && !tmp->find_bridge(dev, handle)) { |
| ret = 0; |
| break; |
| } |
| } |
| up_read(&bus_type_sem); |
| return ret; |
| } |
| |
| /* Get device's handler per its address under its parent */ |
| struct acpi_find_child { |
| acpi_handle handle; |
| acpi_integer address; |
| }; |
| |
| static acpi_status |
| do_acpi_find_child(acpi_handle handle, u32 lvl, void *context, void **rv) |
| { |
| acpi_status status; |
| struct acpi_device_info *info; |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| struct acpi_find_child *find = context; |
| |
| status = acpi_get_object_info(handle, &buffer); |
| if (ACPI_SUCCESS(status)) { |
| info = buffer.pointer; |
| if (info->address == find->address) |
| find->handle = handle; |
| kfree(buffer.pointer); |
| } |
| return AE_OK; |
| } |
| |
| acpi_handle acpi_get_child(acpi_handle parent, acpi_integer address) |
| { |
| struct acpi_find_child find = { NULL, address }; |
| |
| if (!parent) |
| return NULL; |
| acpi_walk_namespace(ACPI_TYPE_DEVICE, parent, |
| 1, do_acpi_find_child, &find, NULL); |
| return find.handle; |
| } |
| |
| EXPORT_SYMBOL(acpi_get_child); |
| |
| /* Link ACPI devices with physical devices */ |
| static void acpi_glue_data_handler(acpi_handle handle, |
| u32 function, void *context) |
| { |
| /* we provide an empty handler */ |
| } |
| |
| /* Note: a success call will increase reference count by one */ |
| struct device *acpi_get_physical_device(acpi_handle handle) |
| { |
| acpi_status status; |
| struct device *dev; |
| |
| status = acpi_get_data(handle, acpi_glue_data_handler, (void **)&dev); |
| if (ACPI_SUCCESS(status)) |
| return get_device(dev); |
| return NULL; |
| } |
| |
| EXPORT_SYMBOL(acpi_get_physical_device); |
| |
| static int acpi_bind_one(struct device *dev, acpi_handle handle) |
| { |
| struct acpi_device *acpi_dev; |
| acpi_status status; |
| |
| if (dev->archdata.acpi_handle) { |
| dev_warn(dev, "Drivers changed 'acpi_handle'\n"); |
| return -EINVAL; |
| } |
| get_device(dev); |
| status = acpi_attach_data(handle, acpi_glue_data_handler, dev); |
| if (ACPI_FAILURE(status)) { |
| put_device(dev); |
| return -EINVAL; |
| } |
| dev->archdata.acpi_handle = handle; |
| |
| status = acpi_bus_get_device(handle, &acpi_dev); |
| if (!ACPI_FAILURE(status)) { |
| int ret; |
| |
| ret = sysfs_create_link(&dev->kobj, &acpi_dev->dev.kobj, |
| "firmware_node"); |
| ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj, |
| "physical_node"); |
| if (acpi_dev->wakeup.flags.valid) { |
| device_set_wakeup_capable(dev, true); |
| device_set_wakeup_enable(dev, |
| acpi_dev->wakeup.state.enabled); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int acpi_unbind_one(struct device *dev) |
| { |
| if (!dev->archdata.acpi_handle) |
| return 0; |
| if (dev == acpi_get_physical_device(dev->archdata.acpi_handle)) { |
| struct acpi_device *acpi_dev; |
| |
| /* acpi_get_physical_device increase refcnt by one */ |
| put_device(dev); |
| |
| if (!acpi_bus_get_device(dev->archdata.acpi_handle, |
| &acpi_dev)) { |
| sysfs_remove_link(&dev->kobj, "firmware_node"); |
| sysfs_remove_link(&acpi_dev->dev.kobj, "physical_node"); |
| } |
| |
| acpi_detach_data(dev->archdata.acpi_handle, |
| acpi_glue_data_handler); |
| dev->archdata.acpi_handle = NULL; |
| /* acpi_bind_one increase refcnt by one */ |
| put_device(dev); |
| } else { |
| dev_err(dev, "Oops, 'acpi_handle' corrupt\n"); |
| } |
| return 0; |
| } |
| |
| static int acpi_platform_notify(struct device *dev) |
| { |
| struct acpi_bus_type *type; |
| acpi_handle handle; |
| int ret = -EINVAL; |
| |
| if (!dev->bus || !dev->parent) { |
| /* bridge devices genernally haven't bus or parent */ |
| ret = acpi_find_bridge_device(dev, &handle); |
| goto end; |
| } |
| type = acpi_get_bus_type(dev->bus); |
| if (!type) { |
| DBG("No ACPI bus support for %s\n", dev->bus_id); |
| ret = -EINVAL; |
| goto end; |
| } |
| if ((ret = type->find_device(dev, &handle)) != 0) |
| DBG("Can't get handler for %s\n", dev->bus_id); |
| end: |
| if (!ret) |
| acpi_bind_one(dev, handle); |
| |
| #if ACPI_GLUE_DEBUG |
| if (!ret) { |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| |
| acpi_get_name(dev->archdata.acpi_handle, |
| ACPI_FULL_PATHNAME, &buffer); |
| DBG("Device %s -> %s\n", dev->bus_id, (char *)buffer.pointer); |
| kfree(buffer.pointer); |
| } else |
| DBG("Device %s -> No ACPI support\n", dev->bus_id); |
| #endif |
| |
| return ret; |
| } |
| |
| static int acpi_platform_notify_remove(struct device *dev) |
| { |
| acpi_unbind_one(dev); |
| return 0; |
| } |
| |
| static int __init init_acpi_device_notify(void) |
| { |
| if (acpi_disabled) |
| return 0; |
| if (platform_notify || platform_notify_remove) { |
| printk(KERN_ERR PREFIX "Can't use platform_notify\n"); |
| return 0; |
| } |
| platform_notify = acpi_platform_notify; |
| platform_notify_remove = acpi_platform_notify_remove; |
| return 0; |
| } |
| |
| arch_initcall(init_acpi_device_notify); |
| |
| |
| #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) |
| |
| #ifdef CONFIG_PM |
| static u32 rtc_handler(void *context) |
| { |
| acpi_clear_event(ACPI_EVENT_RTC); |
| acpi_disable_event(ACPI_EVENT_RTC, 0); |
| return ACPI_INTERRUPT_HANDLED; |
| } |
| |
| static inline void rtc_wake_setup(void) |
| { |
| acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); |
| /* |
| * After the RTC handler is installed, the Fixed_RTC event should |
| * be disabled. Only when the RTC alarm is set will it be enabled. |
| */ |
| acpi_clear_event(ACPI_EVENT_RTC); |
| acpi_disable_event(ACPI_EVENT_RTC, 0); |
| } |
| |
| static void rtc_wake_on(struct device *dev) |
| { |
| acpi_clear_event(ACPI_EVENT_RTC); |
| acpi_enable_event(ACPI_EVENT_RTC, 0); |
| } |
| |
| static void rtc_wake_off(struct device *dev) |
| { |
| acpi_disable_event(ACPI_EVENT_RTC, 0); |
| } |
| #else |
| #define rtc_wake_setup() do{}while(0) |
| #define rtc_wake_on NULL |
| #define rtc_wake_off NULL |
| #endif |
| |
| /* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find |
| * its device node and pass extra config data. This helps its driver use |
| * capabilities that the now-obsolete mc146818 didn't have, and informs it |
| * that this board's RTC is wakeup-capable (per ACPI spec). |
| */ |
| #include <linux/mc146818rtc.h> |
| |
| static struct cmos_rtc_board_info rtc_info; |
| |
| |
| /* PNP devices are registered in a subsys_initcall(); |
| * ACPI specifies the PNP IDs to use. |
| */ |
| #include <linux/pnp.h> |
| |
| static int __init pnp_match(struct device *dev, void *data) |
| { |
| static const char *ids[] = { "PNP0b00", "PNP0b01", "PNP0b02", }; |
| struct pnp_dev *pnp = to_pnp_dev(dev); |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(ids); i++) { |
| if (compare_pnp_id(pnp->id, ids[i]) != 0) |
| return 1; |
| } |
| return 0; |
| } |
| |
| static struct device *__init get_rtc_dev(void) |
| { |
| return bus_find_device(&pnp_bus_type, NULL, NULL, pnp_match); |
| } |
| |
| static int __init acpi_rtc_init(void) |
| { |
| struct device *dev = get_rtc_dev(); |
| |
| if (acpi_disabled) |
| return 0; |
| |
| if (dev) { |
| rtc_wake_setup(); |
| rtc_info.wake_on = rtc_wake_on; |
| rtc_info.wake_off = rtc_wake_off; |
| |
| /* workaround bug in some ACPI tables */ |
| if (acpi_gbl_FADT.month_alarm && !acpi_gbl_FADT.day_alarm) { |
| DBG("bogus FADT month_alarm\n"); |
| acpi_gbl_FADT.month_alarm = 0; |
| } |
| |
| rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm; |
| rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm; |
| rtc_info.rtc_century = acpi_gbl_FADT.century; |
| |
| /* NOTE: S4_RTC_WAKE is NOT currently useful to Linux */ |
| if (acpi_gbl_FADT.flags & ACPI_FADT_S4_RTC_WAKE) |
| printk(PREFIX "RTC can wake from S4\n"); |
| |
| |
| dev->platform_data = &rtc_info; |
| |
| /* RTC always wakes from S1/S2/S3, and often S4/STD */ |
| device_init_wakeup(dev, 1); |
| |
| put_device(dev); |
| } else |
| DBG("RTC unavailable?\n"); |
| return 0; |
| } |
| module_init(acpi_rtc_init); |
| |
| #endif |