| /* |
| * cx18 buffer queues |
| * |
| * Derived from ivtv-queue.c |
| * |
| * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> |
| * Copyright (C) 2008 Andy Walls <awalls@radix.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA |
| * 02111-1307 USA |
| */ |
| |
| #include "cx18-driver.h" |
| #include "cx18-queue.h" |
| #include "cx18-streams.h" |
| #include "cx18-scb.h" |
| #include "cx18-io.h" |
| |
| void cx18_buf_swap(struct cx18_buffer *buf) |
| { |
| int i; |
| |
| for (i = 0; i < buf->bytesused; i += 4) |
| swab32s((u32 *)(buf->buf + i)); |
| } |
| |
| void _cx18_mdl_swap(struct cx18_mdl *mdl) |
| { |
| struct cx18_buffer *buf; |
| |
| list_for_each_entry(buf, &mdl->buf_list, list) { |
| if (buf->bytesused == 0) |
| break; |
| cx18_buf_swap(buf); |
| } |
| } |
| |
| void cx18_queue_init(struct cx18_queue *q) |
| { |
| INIT_LIST_HEAD(&q->list); |
| atomic_set(&q->depth, 0); |
| q->bytesused = 0; |
| } |
| |
| struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_mdl *mdl, |
| struct cx18_queue *q, int to_front) |
| { |
| /* clear the mdl if it is not to be enqueued to the full queue */ |
| if (q != &s->q_full) { |
| mdl->bytesused = 0; |
| mdl->readpos = 0; |
| mdl->m_flags = 0; |
| mdl->skipped = 0; |
| mdl->curr_buf = NULL; |
| } |
| |
| /* q_busy is restricted to a max buffer count imposed by firmware */ |
| if (q == &s->q_busy && |
| atomic_read(&q->depth) >= CX18_MAX_FW_MDLS_PER_STREAM) |
| q = &s->q_free; |
| |
| spin_lock(&q->lock); |
| |
| if (to_front) |
| list_add(&mdl->list, &q->list); /* LIFO */ |
| else |
| list_add_tail(&mdl->list, &q->list); /* FIFO */ |
| q->bytesused += mdl->bytesused - mdl->readpos; |
| atomic_inc(&q->depth); |
| |
| spin_unlock(&q->lock); |
| return q; |
| } |
| |
| struct cx18_mdl *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q) |
| { |
| struct cx18_mdl *mdl = NULL; |
| |
| spin_lock(&q->lock); |
| if (!list_empty(&q->list)) { |
| mdl = list_first_entry(&q->list, struct cx18_mdl, list); |
| list_del_init(&mdl->list); |
| q->bytesused -= mdl->bytesused - mdl->readpos; |
| mdl->skipped = 0; |
| atomic_dec(&q->depth); |
| } |
| spin_unlock(&q->lock); |
| return mdl; |
| } |
| |
| static void _cx18_mdl_set_buf_bytesused(struct cx18_stream *s, |
| struct cx18_mdl *mdl) |
| { |
| struct cx18_buffer *buf; |
| u32 buf_size = s->buf_size; |
| u32 bytesused = mdl->bytesused; |
| |
| list_for_each_entry(buf, &mdl->buf_list, list) { |
| buf->readpos = 0; |
| if (bytesused >= buf_size) { |
| buf->bytesused = buf_size; |
| bytesused -= buf_size; |
| } else { |
| buf->bytesused = bytesused; |
| bytesused = 0; |
| } |
| } |
| } |
| |
| static inline void cx18_mdl_set_buf_bytesused(struct cx18_stream *s, |
| struct cx18_mdl *mdl) |
| { |
| struct cx18_buffer *buf; |
| |
| if (list_is_singular(&mdl->buf_list)) { |
| buf = list_first_entry(&mdl->buf_list, struct cx18_buffer, |
| list); |
| buf->bytesused = mdl->bytesused; |
| buf->readpos = 0; |
| } else { |
| _cx18_mdl_set_buf_bytesused(s, mdl); |
| } |
| } |
| |
| struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id, |
| u32 bytesused) |
| { |
| struct cx18 *cx = s->cx; |
| struct cx18_mdl *mdl; |
| struct cx18_mdl *tmp; |
| struct cx18_mdl *ret = NULL; |
| LIST_HEAD(sweep_up); |
| |
| /* |
| * We don't have to acquire multiple q locks here, because we are |
| * serialized by the single threaded work handler. |
| * MDLs from the firmware will thus remain in order as |
| * they are moved from q_busy to q_full or to the dvb ring buffer. |
| */ |
| spin_lock(&s->q_busy.lock); |
| list_for_each_entry_safe(mdl, tmp, &s->q_busy.list, list) { |
| /* |
| * We should find what the firmware told us is done, |
| * right at the front of the queue. If we don't, we likely have |
| * missed an mdl done message from the firmware. |
| * Once we skip an mdl repeatedly, relative to the size of |
| * q_busy, we have high confidence we've missed it. |
| */ |
| if (mdl->id != id) { |
| mdl->skipped++; |
| if (mdl->skipped >= atomic_read(&s->q_busy.depth)-1) { |
| /* mdl must have fallen out of rotation */ |
| CX18_WARN("Skipped %s, MDL %d, %d " |
| "times - it must have dropped out of " |
| "rotation\n", s->name, mdl->id, |
| mdl->skipped); |
| /* Sweep it up to put it back into rotation */ |
| list_move_tail(&mdl->list, &sweep_up); |
| atomic_dec(&s->q_busy.depth); |
| } |
| continue; |
| } |
| /* |
| * We pull the desired mdl off of the queue here. Something |
| * will have to put it back on a queue later. |
| */ |
| list_del_init(&mdl->list); |
| atomic_dec(&s->q_busy.depth); |
| ret = mdl; |
| break; |
| } |
| spin_unlock(&s->q_busy.lock); |
| |
| /* |
| * We found the mdl for which we were looking. Get it ready for |
| * the caller to put on q_full or in the dvb ring buffer. |
| */ |
| if (ret != NULL) { |
| ret->bytesused = bytesused; |
| ret->skipped = 0; |
| /* 0'ed readpos, m_flags & curr_buf when mdl went on q_busy */ |
| cx18_mdl_set_buf_bytesused(s, ret); |
| cx18_mdl_sync_for_cpu(s, ret); |
| if (s->type != CX18_ENC_STREAM_TYPE_TS) |
| set_bit(CX18_F_M_NEED_SWAP, &ret->m_flags); |
| } |
| |
| /* Put any mdls the firmware is ignoring back into normal rotation */ |
| list_for_each_entry_safe(mdl, tmp, &sweep_up, list) { |
| list_del_init(&mdl->list); |
| cx18_enqueue(s, mdl, &s->q_free); |
| } |
| return ret; |
| } |
| |
| /* Move all mdls of a queue, while flushing the mdl */ |
| static void cx18_queue_flush(struct cx18_stream *s, |
| struct cx18_queue *q_src, struct cx18_queue *q_dst) |
| { |
| struct cx18_mdl *mdl; |
| |
| /* It only makes sense to flush to q_free or q_idle */ |
| if (q_src == q_dst || q_dst == &s->q_full || q_dst == &s->q_busy) |
| return; |
| |
| spin_lock(&q_src->lock); |
| spin_lock(&q_dst->lock); |
| while (!list_empty(&q_src->list)) { |
| mdl = list_first_entry(&q_src->list, struct cx18_mdl, list); |
| list_move_tail(&mdl->list, &q_dst->list); |
| mdl->bytesused = 0; |
| mdl->readpos = 0; |
| mdl->m_flags = 0; |
| mdl->skipped = 0; |
| mdl->curr_buf = NULL; |
| atomic_inc(&q_dst->depth); |
| } |
| cx18_queue_init(q_src); |
| spin_unlock(&q_src->lock); |
| spin_unlock(&q_dst->lock); |
| } |
| |
| void cx18_flush_queues(struct cx18_stream *s) |
| { |
| cx18_queue_flush(s, &s->q_busy, &s->q_free); |
| cx18_queue_flush(s, &s->q_full, &s->q_free); |
| } |
| |
| /* |
| * Note, s->buf_pool is not protected by a lock, |
| * the stream better not have *anything* going on when calling this |
| */ |
| void cx18_unload_queues(struct cx18_stream *s) |
| { |
| struct cx18_queue *q_idle = &s->q_idle; |
| struct cx18_mdl *mdl; |
| struct cx18_buffer *buf; |
| |
| /* Move all MDLS to q_idle */ |
| cx18_queue_flush(s, &s->q_busy, q_idle); |
| cx18_queue_flush(s, &s->q_full, q_idle); |
| cx18_queue_flush(s, &s->q_free, q_idle); |
| |
| /* Reset MDL id's and move all buffers back to the stream's buf_pool */ |
| spin_lock(&q_idle->lock); |
| list_for_each_entry(mdl, &q_idle->list, list) { |
| while (!list_empty(&mdl->buf_list)) { |
| buf = list_first_entry(&mdl->buf_list, |
| struct cx18_buffer, list); |
| list_move_tail(&buf->list, &s->buf_pool); |
| buf->bytesused = 0; |
| buf->readpos = 0; |
| } |
| mdl->id = s->mdl_base_idx; /* reset id to a "safe" value */ |
| /* all other mdl fields were cleared by cx18_queue_flush() */ |
| } |
| spin_unlock(&q_idle->lock); |
| } |
| |
| /* |
| * Note, s->buf_pool is not protected by a lock, |
| * the stream better not have *anything* going on when calling this |
| */ |
| void cx18_load_queues(struct cx18_stream *s) |
| { |
| struct cx18 *cx = s->cx; |
| struct cx18_mdl *mdl; |
| struct cx18_buffer *buf; |
| int mdl_id; |
| int i; |
| u32 partial_buf_size; |
| |
| /* |
| * Attach buffers to MDLs, give the MDLs ids, and add MDLs to q_free |
| * Excess MDLs are left on q_idle |
| * Excess buffers are left in buf_pool and/or on an MDL in q_idle |
| */ |
| mdl_id = s->mdl_base_idx; |
| for (mdl = cx18_dequeue(s, &s->q_idle), i = s->bufs_per_mdl; |
| mdl != NULL && i == s->bufs_per_mdl; |
| mdl = cx18_dequeue(s, &s->q_idle)) { |
| |
| mdl->id = mdl_id; |
| |
| for (i = 0; i < s->bufs_per_mdl; i++) { |
| if (list_empty(&s->buf_pool)) |
| break; |
| |
| buf = list_first_entry(&s->buf_pool, struct cx18_buffer, |
| list); |
| list_move_tail(&buf->list, &mdl->buf_list); |
| |
| /* update the firmware's MDL array with this buffer */ |
| cx18_writel(cx, buf->dma_handle, |
| &cx->scb->cpu_mdl[mdl_id + i].paddr); |
| cx18_writel(cx, s->buf_size, |
| &cx->scb->cpu_mdl[mdl_id + i].length); |
| } |
| |
| if (i == s->bufs_per_mdl) { |
| /* |
| * The encoder doesn't honor s->mdl_size. So in the |
| * case of a non-integral number of buffers to meet |
| * mdl_size, we lie about the size of the last buffer |
| * in the MDL to get the encoder to really only send |
| * us mdl_size bytes per MDL transfer. |
| */ |
| partial_buf_size = s->mdl_size % s->buf_size; |
| if (partial_buf_size) { |
| cx18_writel(cx, partial_buf_size, |
| &cx->scb->cpu_mdl[mdl_id + i - 1].length); |
| } |
| cx18_enqueue(s, mdl, &s->q_free); |
| } else { |
| /* Not enough buffers for this MDL; we won't use it */ |
| cx18_push(s, mdl, &s->q_idle); |
| } |
| mdl_id += i; |
| } |
| } |
| |
| void _cx18_mdl_sync_for_cpu(struct cx18_stream *s, struct cx18_mdl *mdl) |
| { |
| int dma = s->dma; |
| u32 buf_size = s->buf_size; |
| struct pci_dev *pci_dev = s->cx->pci_dev; |
| struct cx18_buffer *buf; |
| |
| list_for_each_entry(buf, &mdl->buf_list, list) |
| pci_dma_sync_single_for_cpu(pci_dev, buf->dma_handle, |
| buf_size, dma); |
| } |
| |
| void _cx18_mdl_sync_for_device(struct cx18_stream *s, struct cx18_mdl *mdl) |
| { |
| int dma = s->dma; |
| u32 buf_size = s->buf_size; |
| struct pci_dev *pci_dev = s->cx->pci_dev; |
| struct cx18_buffer *buf; |
| |
| list_for_each_entry(buf, &mdl->buf_list, list) |
| pci_dma_sync_single_for_device(pci_dev, buf->dma_handle, |
| buf_size, dma); |
| } |
| |
| int cx18_stream_alloc(struct cx18_stream *s) |
| { |
| struct cx18 *cx = s->cx; |
| int i; |
| |
| if (s->buffers == 0) |
| return 0; |
| |
| CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers " |
| "(%d.%02d kB total)\n", |
| s->name, s->buffers, s->buf_size, |
| s->buffers * s->buf_size / 1024, |
| (s->buffers * s->buf_size * 100 / 1024) % 100); |
| |
| if (((char __iomem *)&cx->scb->cpu_mdl[cx->free_mdl_idx + s->buffers] - |
| (char __iomem *)cx->scb) > SCB_RESERVED_SIZE) { |
| unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE - |
| ((char __iomem *)cx->scb->cpu_mdl)); |
| |
| CX18_ERR("Too many buffers, cannot fit in SCB area\n"); |
| CX18_ERR("Max buffers = %zd\n", |
| bufsz / sizeof(struct cx18_mdl_ent)); |
| return -ENOMEM; |
| } |
| |
| s->mdl_base_idx = cx->free_mdl_idx; |
| |
| /* allocate stream buffers and MDLs */ |
| for (i = 0; i < s->buffers; i++) { |
| struct cx18_mdl *mdl; |
| struct cx18_buffer *buf; |
| |
| /* 1 MDL per buffer to handle the worst & also default case */ |
| mdl = kzalloc(sizeof(struct cx18_mdl), GFP_KERNEL|__GFP_NOWARN); |
| if (mdl == NULL) |
| break; |
| |
| buf = kzalloc(sizeof(struct cx18_buffer), |
| GFP_KERNEL|__GFP_NOWARN); |
| if (buf == NULL) { |
| kfree(mdl); |
| break; |
| } |
| |
| buf->buf = kmalloc(s->buf_size, GFP_KERNEL|__GFP_NOWARN); |
| if (buf->buf == NULL) { |
| kfree(mdl); |
| kfree(buf); |
| break; |
| } |
| |
| INIT_LIST_HEAD(&mdl->list); |
| INIT_LIST_HEAD(&mdl->buf_list); |
| mdl->id = s->mdl_base_idx; /* a somewhat safe value */ |
| cx18_enqueue(s, mdl, &s->q_idle); |
| |
| INIT_LIST_HEAD(&buf->list); |
| buf->dma_handle = pci_map_single(s->cx->pci_dev, |
| buf->buf, s->buf_size, s->dma); |
| cx18_buf_sync_for_cpu(s, buf); |
| list_add_tail(&buf->list, &s->buf_pool); |
| } |
| if (i == s->buffers) { |
| cx->free_mdl_idx += s->buffers; |
| return 0; |
| } |
| CX18_ERR("Couldn't allocate buffers for %s stream\n", s->name); |
| cx18_stream_free(s); |
| return -ENOMEM; |
| } |
| |
| void cx18_stream_free(struct cx18_stream *s) |
| { |
| struct cx18_mdl *mdl; |
| struct cx18_buffer *buf; |
| |
| /* move all buffers to buf_pool and all MDLs to q_idle */ |
| cx18_unload_queues(s); |
| |
| /* empty q_idle */ |
| while ((mdl = cx18_dequeue(s, &s->q_idle))) |
| kfree(mdl); |
| |
| /* empty buf_pool */ |
| while (!list_empty(&s->buf_pool)) { |
| buf = list_first_entry(&s->buf_pool, struct cx18_buffer, list); |
| list_del_init(&buf->list); |
| |
| pci_unmap_single(s->cx->pci_dev, buf->dma_handle, |
| s->buf_size, s->dma); |
| kfree(buf->buf); |
| kfree(buf); |
| } |
| } |