| /* |
| * Generic HDLC support routines for Linux |
| * Cisco HDLC support |
| * |
| * Copyright (C) 2000 - 2006 Krzysztof Halasa <khc@pm.waw.pl> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License |
| * as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/hdlc.h> |
| #include <linux/if_arp.h> |
| #include <linux/inetdevice.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pkt_sched.h> |
| #include <linux/poll.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/skbuff.h> |
| |
| #undef DEBUG_HARD_HEADER |
| |
| #define CISCO_MULTICAST 0x8F /* Cisco multicast address */ |
| #define CISCO_UNICAST 0x0F /* Cisco unicast address */ |
| #define CISCO_KEEPALIVE 0x8035 /* Cisco keepalive protocol */ |
| #define CISCO_SYS_INFO 0x2000 /* Cisco interface/system info */ |
| #define CISCO_ADDR_REQ 0 /* Cisco address request */ |
| #define CISCO_ADDR_REPLY 1 /* Cisco address reply */ |
| #define CISCO_KEEPALIVE_REQ 2 /* Cisco keepalive request */ |
| |
| |
| struct hdlc_header { |
| u8 address; |
| u8 control; |
| __be16 protocol; |
| }__packed; |
| |
| |
| struct cisco_packet { |
| __be32 type; /* code */ |
| __be32 par1; |
| __be32 par2; |
| __be16 rel; /* reliability */ |
| __be32 time; |
| }__packed; |
| #define CISCO_PACKET_LEN 18 |
| #define CISCO_BIG_PACKET_LEN 20 |
| |
| |
| struct cisco_state { |
| cisco_proto settings; |
| |
| struct timer_list timer; |
| spinlock_t lock; |
| unsigned long last_poll; |
| int up; |
| u32 txseq; /* TX sequence number, 0 = none */ |
| u32 rxseq; /* RX sequence number */ |
| }; |
| |
| |
| static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr); |
| |
| |
| static inline struct cisco_state* state(hdlc_device *hdlc) |
| { |
| return (struct cisco_state *)hdlc->state; |
| } |
| |
| |
| static int cisco_hard_header(struct sk_buff *skb, struct net_device *dev, |
| u16 type, const void *daddr, const void *saddr, |
| unsigned int len) |
| { |
| struct hdlc_header *data; |
| #ifdef DEBUG_HARD_HEADER |
| printk(KERN_DEBUG "%s: cisco_hard_header called\n", dev->name); |
| #endif |
| |
| skb_push(skb, sizeof(struct hdlc_header)); |
| data = (struct hdlc_header*)skb->data; |
| if (type == CISCO_KEEPALIVE) |
| data->address = CISCO_MULTICAST; |
| else |
| data->address = CISCO_UNICAST; |
| data->control = 0; |
| data->protocol = htons(type); |
| |
| return sizeof(struct hdlc_header); |
| } |
| |
| |
| |
| static void cisco_keepalive_send(struct net_device *dev, u32 type, |
| __be32 par1, __be32 par2) |
| { |
| struct sk_buff *skb; |
| struct cisco_packet *data; |
| |
| skb = dev_alloc_skb(sizeof(struct hdlc_header) + |
| sizeof(struct cisco_packet)); |
| if (!skb) { |
| printk(KERN_WARNING |
| "%s: Memory squeeze on cisco_keepalive_send()\n", |
| dev->name); |
| return; |
| } |
| skb_reserve(skb, 4); |
| cisco_hard_header(skb, dev, CISCO_KEEPALIVE, NULL, NULL, 0); |
| data = (struct cisco_packet*)(skb->data + 4); |
| |
| data->type = htonl(type); |
| data->par1 = par1; |
| data->par2 = par2; |
| data->rel = cpu_to_be16(0xFFFF); |
| /* we will need do_div here if 1000 % HZ != 0 */ |
| data->time = htonl((jiffies - INITIAL_JIFFIES) * (1000 / HZ)); |
| |
| skb_put(skb, sizeof(struct cisco_packet)); |
| skb->priority = TC_PRIO_CONTROL; |
| skb->dev = dev; |
| skb_reset_network_header(skb); |
| |
| dev_queue_xmit(skb); |
| } |
| |
| |
| |
| static __be16 cisco_type_trans(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct hdlc_header *data = (struct hdlc_header*)skb->data; |
| |
| if (skb->len < sizeof(struct hdlc_header)) |
| return cpu_to_be16(ETH_P_HDLC); |
| |
| if (data->address != CISCO_MULTICAST && |
| data->address != CISCO_UNICAST) |
| return cpu_to_be16(ETH_P_HDLC); |
| |
| switch (data->protocol) { |
| case cpu_to_be16(ETH_P_IP): |
| case cpu_to_be16(ETH_P_IPX): |
| case cpu_to_be16(ETH_P_IPV6): |
| skb_pull(skb, sizeof(struct hdlc_header)); |
| return data->protocol; |
| default: |
| return cpu_to_be16(ETH_P_HDLC); |
| } |
| } |
| |
| |
| static int cisco_rx(struct sk_buff *skb) |
| { |
| struct net_device *dev = skb->dev; |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| struct cisco_state *st = state(hdlc); |
| struct hdlc_header *data = (struct hdlc_header*)skb->data; |
| struct cisco_packet *cisco_data; |
| struct in_device *in_dev; |
| __be32 addr, mask; |
| u32 ack; |
| |
| if (skb->len < sizeof(struct hdlc_header)) |
| goto rx_error; |
| |
| if (data->address != CISCO_MULTICAST && |
| data->address != CISCO_UNICAST) |
| goto rx_error; |
| |
| switch (ntohs(data->protocol)) { |
| case CISCO_SYS_INFO: |
| /* Packet is not needed, drop it. */ |
| dev_kfree_skb_any(skb); |
| return NET_RX_SUCCESS; |
| |
| case CISCO_KEEPALIVE: |
| if ((skb->len != sizeof(struct hdlc_header) + |
| CISCO_PACKET_LEN) && |
| (skb->len != sizeof(struct hdlc_header) + |
| CISCO_BIG_PACKET_LEN)) { |
| printk(KERN_INFO "%s: Invalid length of Cisco control" |
| " packet (%d bytes)\n", dev->name, skb->len); |
| goto rx_error; |
| } |
| |
| cisco_data = (struct cisco_packet*)(skb->data + sizeof |
| (struct hdlc_header)); |
| |
| switch (ntohl (cisco_data->type)) { |
| case CISCO_ADDR_REQ: /* Stolen from syncppp.c :-) */ |
| rcu_read_lock(); |
| in_dev = __in_dev_get_rcu(dev); |
| addr = 0; |
| mask = ~cpu_to_be32(0); /* is the mask correct? */ |
| |
| if (in_dev != NULL) { |
| struct in_ifaddr **ifap = &in_dev->ifa_list; |
| |
| while (*ifap != NULL) { |
| if (strcmp(dev->name, |
| (*ifap)->ifa_label) == 0) { |
| addr = (*ifap)->ifa_local; |
| mask = (*ifap)->ifa_mask; |
| break; |
| } |
| ifap = &(*ifap)->ifa_next; |
| } |
| |
| cisco_keepalive_send(dev, CISCO_ADDR_REPLY, |
| addr, mask); |
| } |
| rcu_read_unlock(); |
| dev_kfree_skb_any(skb); |
| return NET_RX_SUCCESS; |
| |
| case CISCO_ADDR_REPLY: |
| printk(KERN_INFO "%s: Unexpected Cisco IP address " |
| "reply\n", dev->name); |
| goto rx_error; |
| |
| case CISCO_KEEPALIVE_REQ: |
| spin_lock(&st->lock); |
| st->rxseq = ntohl(cisco_data->par1); |
| ack = ntohl(cisco_data->par2); |
| if (ack && (ack == st->txseq || |
| /* our current REQ may be in transit */ |
| ack == st->txseq - 1)) { |
| st->last_poll = jiffies; |
| if (!st->up) { |
| u32 sec, min, hrs, days; |
| sec = ntohl(cisco_data->time) / 1000; |
| min = sec / 60; sec -= min * 60; |
| hrs = min / 60; min -= hrs * 60; |
| days = hrs / 24; hrs -= days * 24; |
| printk(KERN_INFO "%s: Link up (peer " |
| "uptime %ud%uh%um%us)\n", |
| dev->name, days, hrs, min, sec); |
| netif_dormant_off(dev); |
| st->up = 1; |
| } |
| } |
| spin_unlock(&st->lock); |
| |
| dev_kfree_skb_any(skb); |
| return NET_RX_SUCCESS; |
| } /* switch (keepalive type) */ |
| } /* switch (protocol) */ |
| |
| printk(KERN_INFO "%s: Unsupported protocol %x\n", dev->name, |
| ntohs(data->protocol)); |
| dev_kfree_skb_any(skb); |
| return NET_RX_DROP; |
| |
| rx_error: |
| dev->stats.rx_errors++; /* Mark error */ |
| dev_kfree_skb_any(skb); |
| return NET_RX_DROP; |
| } |
| |
| |
| |
| static void cisco_timer(unsigned long arg) |
| { |
| struct net_device *dev = (struct net_device *)arg; |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| struct cisco_state *st = state(hdlc); |
| |
| spin_lock(&st->lock); |
| if (st->up && |
| time_after(jiffies, st->last_poll + st->settings.timeout * HZ)) { |
| st->up = 0; |
| printk(KERN_INFO "%s: Link down\n", dev->name); |
| netif_dormant_on(dev); |
| } |
| |
| cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq), |
| htonl(st->rxseq)); |
| spin_unlock(&st->lock); |
| |
| st->timer.expires = jiffies + st->settings.interval * HZ; |
| st->timer.function = cisco_timer; |
| st->timer.data = arg; |
| add_timer(&st->timer); |
| } |
| |
| |
| |
| static void cisco_start(struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| struct cisco_state *st = state(hdlc); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&st->lock, flags); |
| st->up = st->txseq = st->rxseq = 0; |
| spin_unlock_irqrestore(&st->lock, flags); |
| |
| init_timer(&st->timer); |
| st->timer.expires = jiffies + HZ; /* First poll after 1 s */ |
| st->timer.function = cisco_timer; |
| st->timer.data = (unsigned long)dev; |
| add_timer(&st->timer); |
| } |
| |
| |
| |
| static void cisco_stop(struct net_device *dev) |
| { |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| struct cisco_state *st = state(hdlc); |
| unsigned long flags; |
| |
| del_timer_sync(&st->timer); |
| |
| spin_lock_irqsave(&st->lock, flags); |
| netif_dormant_on(dev); |
| st->up = st->txseq = 0; |
| spin_unlock_irqrestore(&st->lock, flags); |
| } |
| |
| |
| static struct hdlc_proto proto = { |
| .start = cisco_start, |
| .stop = cisco_stop, |
| .type_trans = cisco_type_trans, |
| .ioctl = cisco_ioctl, |
| .netif_rx = cisco_rx, |
| .module = THIS_MODULE, |
| }; |
| |
| static const struct header_ops cisco_header_ops = { |
| .create = cisco_hard_header, |
| }; |
| |
| static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) |
| { |
| cisco_proto __user *cisco_s = ifr->ifr_settings.ifs_ifsu.cisco; |
| const size_t size = sizeof(cisco_proto); |
| cisco_proto new_settings; |
| hdlc_device *hdlc = dev_to_hdlc(dev); |
| int result; |
| |
| switch (ifr->ifr_settings.type) { |
| case IF_GET_PROTO: |
| if (dev_to_hdlc(dev)->proto != &proto) |
| return -EINVAL; |
| ifr->ifr_settings.type = IF_PROTO_CISCO; |
| if (ifr->ifr_settings.size < size) { |
| ifr->ifr_settings.size = size; /* data size wanted */ |
| return -ENOBUFS; |
| } |
| if (copy_to_user(cisco_s, &state(hdlc)->settings, size)) |
| return -EFAULT; |
| return 0; |
| |
| case IF_PROTO_CISCO: |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| if (dev->flags & IFF_UP) |
| return -EBUSY; |
| |
| if (copy_from_user(&new_settings, cisco_s, size)) |
| return -EFAULT; |
| |
| if (new_settings.interval < 1 || |
| new_settings.timeout < 2) |
| return -EINVAL; |
| |
| result = hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); |
| if (result) |
| return result; |
| |
| result = attach_hdlc_protocol(dev, &proto, |
| sizeof(struct cisco_state)); |
| if (result) |
| return result; |
| |
| memcpy(&state(hdlc)->settings, &new_settings, size); |
| spin_lock_init(&state(hdlc)->lock); |
| dev->header_ops = &cisco_header_ops; |
| dev->type = ARPHRD_CISCO; |
| netif_dormant_on(dev); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| |
| static int __init mod_init(void) |
| { |
| register_hdlc_protocol(&proto); |
| return 0; |
| } |
| |
| |
| |
| static void __exit mod_exit(void) |
| { |
| unregister_hdlc_protocol(&proto); |
| } |
| |
| |
| module_init(mod_init); |
| module_exit(mod_exit); |
| |
| MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); |
| MODULE_DESCRIPTION("Cisco HDLC protocol support for generic HDLC"); |
| MODULE_LICENSE("GPL v2"); |