ARM: at91: sam9x5 add i2c DT support
For now on use i2c-gpio driver on the same pin as the hardware IP.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index c294657..f0104f4 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -188,4 +188,43 @@
status = "disabled";
};
};
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 30 0 /* sda */
+ &pioA 31 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c@1 {
+ compatible = "i2c-gpio";
+ gpios = <&pioC 0 0 /* sda */
+ &pioC 1 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c@2 {
+ compatible = "i2c-gpio";
+ gpios = <&pioB 4 0 /* sda */
+ &pioB 5 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};