| /* bnx2x_cmn.h: Broadcom Everest network driver. |
| * |
| * Copyright (c) 2007-2011 Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation. |
| * |
| * Maintained by: Eilon Greenstein <eilong@broadcom.com> |
| * Written by: Eliezer Tamir |
| * Based on code from Michael Chan's bnx2 driver |
| * UDP CSUM errata workaround by Arik Gendelman |
| * Slowpath and fastpath rework by Vladislav Zolotarov |
| * Statistics and Link management by Yitchak Gertner |
| * |
| */ |
| #ifndef BNX2X_CMN_H |
| #define BNX2X_CMN_H |
| |
| #include <linux/types.h> |
| #include <linux/netdevice.h> |
| |
| |
| #include "bnx2x.h" |
| |
| extern int num_queues; |
| |
| /************************ Macros ********************************/ |
| #define BNX2X_PCI_FREE(x, y, size) \ |
| do { \ |
| if (x) { \ |
| dma_free_coherent(&bp->pdev->dev, size, (void *)x, y); \ |
| x = NULL; \ |
| y = 0; \ |
| } \ |
| } while (0) |
| |
| #define BNX2X_FREE(x) \ |
| do { \ |
| if (x) { \ |
| kfree((void *)x); \ |
| x = NULL; \ |
| } \ |
| } while (0) |
| |
| #define BNX2X_PCI_ALLOC(x, y, size) \ |
| do { \ |
| x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \ |
| if (x == NULL) \ |
| goto alloc_mem_err; \ |
| memset((void *)x, 0, size); \ |
| } while (0) |
| |
| #define BNX2X_ALLOC(x, size) \ |
| do { \ |
| x = kzalloc(size, GFP_KERNEL); \ |
| if (x == NULL) \ |
| goto alloc_mem_err; \ |
| } while (0) |
| |
| /*********************** Interfaces **************************** |
| * Functions that need to be implemented by each driver version |
| */ |
| |
| /** |
| * bnx2x_initial_phy_init - initialize link parameters structure variables. |
| * |
| * @bp: driver handle |
| * @load_mode: current mode |
| */ |
| u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode); |
| |
| /** |
| * bnx2x_link_set - configure hw according to link parameters structure. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_link_set(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_link_test - query link status. |
| * |
| * @bp: driver handle |
| * @is_serdes: bool |
| * |
| * Returns 0 if link is UP. |
| */ |
| u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes); |
| |
| /** |
| * bnx2x__link_status_update - handles link status change. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x__link_status_update(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_link_report - report link status to upper layer. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_link_report(struct bnx2x *bp); |
| |
| /* None-atomic version of bnx2x_link_report() */ |
| void __bnx2x_link_report(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_get_mf_speed - calculate MF speed. |
| * |
| * @bp: driver handle |
| * |
| * Takes into account current linespeed and MF configuration. |
| */ |
| u16 bnx2x_get_mf_speed(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_msix_sp_int - MSI-X slowpath interrupt handler |
| * |
| * @irq: irq number |
| * @dev_instance: private instance |
| */ |
| irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance); |
| |
| /** |
| * bnx2x_interrupt - non MSI-X interrupt handler |
| * |
| * @irq: irq number |
| * @dev_instance: private instance |
| */ |
| irqreturn_t bnx2x_interrupt(int irq, void *dev_instance); |
| #ifdef BCM_CNIC |
| |
| /** |
| * bnx2x_cnic_notify - send command to cnic driver |
| * |
| * @bp: driver handle |
| * @cmd: command |
| */ |
| int bnx2x_cnic_notify(struct bnx2x *bp, int cmd); |
| |
| /** |
| * bnx2x_setup_cnic_irq_info - provides cnic with IRQ information |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_setup_cnic_irq_info(struct bnx2x *bp); |
| #endif |
| |
| /** |
| * bnx2x_int_enable - enable HW interrupts. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_int_enable(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_int_disable_sync - disable interrupts. |
| * |
| * @bp: driver handle |
| * @disable_hw: true, disable HW interrupts. |
| * |
| * This function ensures that there are no |
| * ISRs or SP DPCs (sp_task) are running after it returns. |
| */ |
| void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw); |
| |
| /** |
| * bnx2x_init_firmware - loads device firmware |
| * |
| * @bp: driver handle |
| */ |
| int bnx2x_init_firmware(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_init_hw - init HW blocks according to current initialization stage. |
| * |
| * @bp: driver handle |
| * @load_code: COMMON, PORT or FUNCTION |
| */ |
| int bnx2x_init_hw(struct bnx2x *bp, u32 load_code); |
| |
| /** |
| * bnx2x_nic_init - init driver internals. |
| * |
| * @bp: driver handle |
| * @load_code: COMMON, PORT or FUNCTION |
| * |
| * Initializes: |
| * - rings |
| * - status blocks |
| * - etc. |
| */ |
| void bnx2x_nic_init(struct bnx2x *bp, u32 load_code); |
| |
| /** |
| * bnx2x_alloc_mem - allocate driver's memory. |
| * |
| * @bp: driver handle |
| */ |
| int bnx2x_alloc_mem(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_free_mem - release driver's memory. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_free_mem(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_setup_client - setup eth client. |
| * |
| * @bp: driver handle |
| * @fp: pointer to fastpath structure |
| * @is_leading: boolean |
| */ |
| int bnx2x_setup_client(struct bnx2x *bp, struct bnx2x_fastpath *fp, |
| int is_leading); |
| |
| /** |
| * bnx2x_set_num_queues - set number of queues according to mode. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_set_num_queues(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_chip_cleanup - cleanup chip internals. |
| * |
| * @bp: driver handle |
| * @unload_mode: COMMON, PORT, FUNCTION |
| * |
| * - Cleanup MAC configuration. |
| * - Closes clients. |
| * - etc. |
| */ |
| void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode); |
| |
| /** |
| * bnx2x_acquire_hw_lock - acquire HW lock. |
| * |
| * @bp: driver handle |
| * @resource: resource bit which was locked |
| */ |
| int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource); |
| |
| /** |
| * bnx2x_release_hw_lock - release HW lock. |
| * |
| * @bp: driver handle |
| * @resource: resource bit which was locked |
| */ |
| int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource); |
| |
| /** |
| * bnx2x_set_eth_mac - configure eth MAC address in the HW |
| * |
| * @bp: driver handle |
| * @set: set or clear |
| * |
| * Configures according to the value in netdev->dev_addr. |
| */ |
| void bnx2x_set_eth_mac(struct bnx2x *bp, int set); |
| |
| #ifdef BCM_CNIC |
| /** |
| * bnx2x_set_fip_eth_mac_addr - Set/Clear FIP MAC(s) |
| * |
| * @bp: driver handle |
| * @set: set or clear the CAM entry |
| * |
| * Used next enties in the CAM after the ETH MAC(s). |
| * This function will wait until the ramdord completion returns. |
| * Return 0 if cussess, -ENODEV if ramrod doesn't return. |
| */ |
| int bnx2x_set_fip_eth_mac_addr(struct bnx2x *bp, int set); |
| |
| /** |
| * bnx2x_set_all_enode_macs - Set/Clear ALL_ENODE mcast MAC. |
| * |
| * @bp: driver handle |
| * @set: set or clear |
| */ |
| int bnx2x_set_all_enode_macs(struct bnx2x *bp, int set); |
| #endif |
| |
| /** |
| * bnx2x_set_rx_mode - set MAC filtering configurations. |
| * |
| * @dev: netdevice |
| * |
| * called with netif_tx_lock from dev_mcast.c |
| */ |
| void bnx2x_set_rx_mode(struct net_device *dev); |
| |
| /** |
| * bnx2x_set_storm_rx_mode - configure MAC filtering rules in a FW. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_set_storm_rx_mode(struct bnx2x *bp); |
| |
| /* Parity errors related */ |
| void bnx2x_inc_load_cnt(struct bnx2x *bp); |
| u32 bnx2x_dec_load_cnt(struct bnx2x *bp); |
| bool bnx2x_chk_parity_attn(struct bnx2x *bp); |
| bool bnx2x_reset_is_done(struct bnx2x *bp); |
| void bnx2x_disable_close_the_gate(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_stats_handle - perform statistics handling according to event. |
| * |
| * @bp: driver handle |
| * @event: bnx2x_stats_event |
| */ |
| void bnx2x_stats_handle(struct bnx2x *bp, enum bnx2x_stats_event event); |
| |
| /** |
| * bnx2x_sp_event - handle ramrods completion. |
| * |
| * @fp: fastpath handle for the event |
| * @rr_cqe: eth_rx_cqe |
| */ |
| void bnx2x_sp_event(struct bnx2x_fastpath *fp, union eth_rx_cqe *rr_cqe); |
| |
| /** |
| * bnx2x_func_start - init function |
| * |
| * @bp: driver handle |
| * |
| * Must be called before sending CLIENT_SETUP for the first client. |
| */ |
| int bnx2x_func_start(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_ilt_set_info - prepare ILT configurations. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_ilt_set_info(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_dcbx_init - initialize dcbx protocol. |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_dcbx_init(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_set_power_state - set power state to the requested value. |
| * |
| * @bp: driver handle |
| * @state: required state D0 or D3hot |
| * |
| * Currently only D0 and D3hot are supported. |
| */ |
| int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state); |
| |
| /** |
| * bnx2x_update_max_mf_config - update MAX part of MF configuration in HW. |
| * |
| * @bp: driver handle |
| * @value: new value |
| */ |
| void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value); |
| |
| /* dev_close main block */ |
| int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode); |
| |
| /* dev_open main block */ |
| int bnx2x_nic_load(struct bnx2x *bp, int load_mode); |
| |
| /* hard_xmit callback */ |
| netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev); |
| |
| /* select_queue callback */ |
| u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb); |
| |
| int bnx2x_change_mac_addr(struct net_device *dev, void *p); |
| |
| /* NAPI poll Rx part */ |
| int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget); |
| |
| /* NAPI poll Tx part */ |
| int bnx2x_tx_int(struct bnx2x_fastpath *fp); |
| |
| /* suspend/resume callbacks */ |
| int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state); |
| int bnx2x_resume(struct pci_dev *pdev); |
| |
| /* Release IRQ vectors */ |
| void bnx2x_free_irq(struct bnx2x *bp); |
| |
| void bnx2x_free_fp_mem(struct bnx2x *bp); |
| int bnx2x_alloc_fp_mem(struct bnx2x *bp); |
| |
| void bnx2x_init_rx_rings(struct bnx2x *bp); |
| void bnx2x_free_skbs(struct bnx2x *bp); |
| void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw); |
| void bnx2x_netif_start(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_enable_msix - set msix configuration. |
| * |
| * @bp: driver handle |
| * |
| * fills msix_table, requests vectors, updates num_queues |
| * according to number of available vectors. |
| */ |
| int bnx2x_enable_msix(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_enable_msi - request msi mode from OS, updated internals accordingly |
| * |
| * @bp: driver handle |
| */ |
| int bnx2x_enable_msi(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_poll - NAPI callback |
| * |
| * @napi: napi structure |
| * @budget: |
| * |
| */ |
| int bnx2x_poll(struct napi_struct *napi, int budget); |
| |
| /** |
| * bnx2x_alloc_mem_bp - allocate memories outsize main driver structure |
| * |
| * @bp: driver handle |
| */ |
| int __devinit bnx2x_alloc_mem_bp(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_free_mem_bp - release memories outsize main driver structure |
| * |
| * @bp: driver handle |
| */ |
| void bnx2x_free_mem_bp(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_change_mtu - change mtu netdev callback |
| * |
| * @dev: net device |
| * @new_mtu: requested mtu |
| * |
| */ |
| int bnx2x_change_mtu(struct net_device *dev, int new_mtu); |
| |
| u32 bnx2x_fix_features(struct net_device *dev, u32 features); |
| int bnx2x_set_features(struct net_device *dev, u32 features); |
| |
| /** |
| * bnx2x_tx_timeout - tx timeout netdev callback |
| * |
| * @dev: net device |
| */ |
| void bnx2x_tx_timeout(struct net_device *dev); |
| |
| static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp) |
| { |
| barrier(); /* status block is written to by the chip */ |
| fp->fp_hc_idx = fp->sb_running_index[SM_RX_ID]; |
| } |
| |
| static inline void bnx2x_update_rx_prod(struct bnx2x *bp, |
| struct bnx2x_fastpath *fp, |
| u16 bd_prod, u16 rx_comp_prod, |
| u16 rx_sge_prod) |
| { |
| struct ustorm_eth_rx_producers rx_prods = {0}; |
| int i; |
| |
| /* Update producers */ |
| rx_prods.bd_prod = bd_prod; |
| rx_prods.cqe_prod = rx_comp_prod; |
| rx_prods.sge_prod = rx_sge_prod; |
| |
| /* |
| * Make sure that the BD and SGE data is updated before updating the |
| * producers since FW might read the BD/SGE right after the producer |
| * is updated. |
| * This is only applicable for weak-ordered memory model archs such |
| * as IA-64. The following barrier is also mandatory since FW will |
| * assumes BDs must have buffers. |
| */ |
| wmb(); |
| |
| for (i = 0; i < sizeof(struct ustorm_eth_rx_producers)/4; i++) |
| REG_WR(bp, |
| BAR_USTRORM_INTMEM + fp->ustorm_rx_prods_offset + i*4, |
| ((u32 *)&rx_prods)[i]); |
| |
| mmiowb(); /* keep prod updates ordered */ |
| |
| DP(NETIF_MSG_RX_STATUS, |
| "queue[%d]: wrote bd_prod %u cqe_prod %u sge_prod %u\n", |
| fp->index, bd_prod, rx_comp_prod, rx_sge_prod); |
| } |
| |
| static inline void bnx2x_igu_ack_sb_gen(struct bnx2x *bp, u8 igu_sb_id, |
| u8 segment, u16 index, u8 op, |
| u8 update, u32 igu_addr) |
| { |
| struct igu_regular cmd_data = {0}; |
| |
| cmd_data.sb_id_and_flags = |
| ((index << IGU_REGULAR_SB_INDEX_SHIFT) | |
| (segment << IGU_REGULAR_SEGMENT_ACCESS_SHIFT) | |
| (update << IGU_REGULAR_BUPDATE_SHIFT) | |
| (op << IGU_REGULAR_ENABLE_INT_SHIFT)); |
| |
| DP(NETIF_MSG_HW, "write 0x%08x to IGU addr 0x%x\n", |
| cmd_data.sb_id_and_flags, igu_addr); |
| REG_WR(bp, igu_addr, cmd_data.sb_id_and_flags); |
| |
| /* Make sure that ACK is written */ |
| mmiowb(); |
| barrier(); |
| } |
| |
| static inline void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, |
| u8 idu_sb_id, bool is_Pf) |
| { |
| u32 data, ctl, cnt = 100; |
| u32 igu_addr_data = IGU_REG_COMMAND_REG_32LSB_DATA; |
| u32 igu_addr_ctl = IGU_REG_COMMAND_REG_CTRL; |
| u32 igu_addr_ack = IGU_REG_CSTORM_TYPE_0_SB_CLEANUP + (idu_sb_id/32)*4; |
| u32 sb_bit = 1 << (idu_sb_id%32); |
| u32 func_encode = BP_FUNC(bp) | |
| ((is_Pf == true ? 1 : 0) << IGU_FID_ENCODE_IS_PF_SHIFT); |
| u32 addr_encode = IGU_CMD_E2_PROD_UPD_BASE + idu_sb_id; |
| |
| /* Not supported in BC mode */ |
| if (CHIP_INT_MODE_IS_BC(bp)) |
| return; |
| |
| data = (IGU_USE_REGISTER_cstorm_type_0_sb_cleanup |
| << IGU_REGULAR_CLEANUP_TYPE_SHIFT) | |
| IGU_REGULAR_CLEANUP_SET | |
| IGU_REGULAR_BCLEANUP; |
| |
| ctl = addr_encode << IGU_CTRL_REG_ADDRESS_SHIFT | |
| func_encode << IGU_CTRL_REG_FID_SHIFT | |
| IGU_CTRL_CMD_TYPE_WR << IGU_CTRL_REG_TYPE_SHIFT; |
| |
| DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", |
| data, igu_addr_data); |
| REG_WR(bp, igu_addr_data, data); |
| mmiowb(); |
| barrier(); |
| DP(NETIF_MSG_HW, "write 0x%08x to IGU(via GRC) addr 0x%x\n", |
| ctl, igu_addr_ctl); |
| REG_WR(bp, igu_addr_ctl, ctl); |
| mmiowb(); |
| barrier(); |
| |
| /* wait for clean up to finish */ |
| while (!(REG_RD(bp, igu_addr_ack) & sb_bit) && --cnt) |
| msleep(20); |
| |
| |
| if (!(REG_RD(bp, igu_addr_ack) & sb_bit)) { |
| DP(NETIF_MSG_HW, "Unable to finish IGU cleanup: " |
| "idu_sb_id %d offset %d bit %d (cnt %d)\n", |
| idu_sb_id, idu_sb_id/32, idu_sb_id%32, cnt); |
| } |
| } |
| |
| static inline void bnx2x_hc_ack_sb(struct bnx2x *bp, u8 sb_id, |
| u8 storm, u16 index, u8 op, u8 update) |
| { |
| u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 + |
| COMMAND_REG_INT_ACK); |
| struct igu_ack_register igu_ack; |
| |
| igu_ack.status_block_index = index; |
| igu_ack.sb_id_and_flags = |
| ((sb_id << IGU_ACK_REGISTER_STATUS_BLOCK_ID_SHIFT) | |
| (storm << IGU_ACK_REGISTER_STORM_ID_SHIFT) | |
| (update << IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT) | |
| (op << IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT)); |
| |
| DP(BNX2X_MSG_OFF, "write 0x%08x to HC addr 0x%x\n", |
| (*(u32 *)&igu_ack), hc_addr); |
| REG_WR(bp, hc_addr, (*(u32 *)&igu_ack)); |
| |
| /* Make sure that ACK is written */ |
| mmiowb(); |
| barrier(); |
| } |
| |
| static inline void bnx2x_igu_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 segment, |
| u16 index, u8 op, u8 update) |
| { |
| u32 igu_addr = BAR_IGU_INTMEM + (IGU_CMD_INT_ACK_BASE + igu_sb_id)*8; |
| |
| bnx2x_igu_ack_sb_gen(bp, igu_sb_id, segment, index, op, update, |
| igu_addr); |
| } |
| |
| static inline void bnx2x_ack_sb(struct bnx2x *bp, u8 igu_sb_id, u8 storm, |
| u16 index, u8 op, u8 update) |
| { |
| if (bp->common.int_block == INT_BLOCK_HC) |
| bnx2x_hc_ack_sb(bp, igu_sb_id, storm, index, op, update); |
| else { |
| u8 segment; |
| |
| if (CHIP_INT_MODE_IS_BC(bp)) |
| segment = storm; |
| else if (igu_sb_id != bp->igu_dsb_id) |
| segment = IGU_SEG_ACCESS_DEF; |
| else if (storm == ATTENTION_ID) |
| segment = IGU_SEG_ACCESS_ATTN; |
| else |
| segment = IGU_SEG_ACCESS_DEF; |
| bnx2x_igu_ack_sb(bp, igu_sb_id, segment, index, op, update); |
| } |
| } |
| |
| static inline u16 bnx2x_hc_ack_int(struct bnx2x *bp) |
| { |
| u32 hc_addr = (HC_REG_COMMAND_REG + BP_PORT(bp)*32 + |
| COMMAND_REG_SIMD_MASK); |
| u32 result = REG_RD(bp, hc_addr); |
| |
| DP(BNX2X_MSG_OFF, "read 0x%08x from HC addr 0x%x\n", |
| result, hc_addr); |
| |
| barrier(); |
| return result; |
| } |
| |
| static inline u16 bnx2x_igu_ack_int(struct bnx2x *bp) |
| { |
| u32 igu_addr = (BAR_IGU_INTMEM + IGU_REG_SISR_MDPC_WMASK_LSB_UPPER*8); |
| u32 result = REG_RD(bp, igu_addr); |
| |
| DP(NETIF_MSG_HW, "read 0x%08x from IGU addr 0x%x\n", |
| result, igu_addr); |
| |
| barrier(); |
| return result; |
| } |
| |
| static inline u16 bnx2x_ack_int(struct bnx2x *bp) |
| { |
| barrier(); |
| if (bp->common.int_block == INT_BLOCK_HC) |
| return bnx2x_hc_ack_int(bp); |
| else |
| return bnx2x_igu_ack_int(bp); |
| } |
| |
| static inline int bnx2x_has_tx_work_unload(struct bnx2x_fastpath *fp) |
| { |
| /* Tell compiler that consumer and producer can change */ |
| barrier(); |
| return fp->tx_pkt_prod != fp->tx_pkt_cons; |
| } |
| |
| static inline u16 bnx2x_tx_avail(struct bnx2x_fastpath *fp) |
| { |
| s16 used; |
| u16 prod; |
| u16 cons; |
| |
| prod = fp->tx_bd_prod; |
| cons = fp->tx_bd_cons; |
| |
| /* NUM_TX_RINGS = number of "next-page" entries |
| It will be used as a threshold */ |
| used = SUB_S16(prod, cons) + (s16)NUM_TX_RINGS; |
| |
| #ifdef BNX2X_STOP_ON_ERROR |
| WARN_ON(used < 0); |
| WARN_ON(used > fp->bp->tx_ring_size); |
| WARN_ON((fp->bp->tx_ring_size - used) > MAX_TX_AVAIL); |
| #endif |
| |
| return (s16)(fp->bp->tx_ring_size) - used; |
| } |
| |
| static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp) |
| { |
| u16 hw_cons; |
| |
| /* Tell compiler that status block fields can change */ |
| barrier(); |
| hw_cons = le16_to_cpu(*fp->tx_cons_sb); |
| return hw_cons != fp->tx_pkt_cons; |
| } |
| |
| static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp) |
| { |
| u16 rx_cons_sb; |
| |
| /* Tell compiler that status block fields can change */ |
| barrier(); |
| rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); |
| if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) |
| rx_cons_sb++; |
| return (fp->rx_comp_cons != rx_cons_sb); |
| } |
| |
| /** |
| * disables tx from stack point of view |
| * |
| * @bp: driver handle |
| */ |
| static inline void bnx2x_tx_disable(struct bnx2x *bp) |
| { |
| netif_tx_disable(bp->dev); |
| netif_carrier_off(bp->dev); |
| } |
| |
| static inline void bnx2x_free_rx_sge(struct bnx2x *bp, |
| struct bnx2x_fastpath *fp, u16 index) |
| { |
| struct sw_rx_page *sw_buf = &fp->rx_page_ring[index]; |
| struct page *page = sw_buf->page; |
| struct eth_rx_sge *sge = &fp->rx_sge_ring[index]; |
| |
| /* Skip "next page" elements */ |
| if (!page) |
| return; |
| |
| dma_unmap_page(&bp->pdev->dev, dma_unmap_addr(sw_buf, mapping), |
| SGE_PAGE_SIZE*PAGES_PER_SGE, DMA_FROM_DEVICE); |
| __free_pages(page, PAGES_PER_SGE_SHIFT); |
| |
| sw_buf->page = NULL; |
| sge->addr_hi = 0; |
| sge->addr_lo = 0; |
| } |
| |
| static inline void bnx2x_add_all_napi(struct bnx2x *bp) |
| { |
| int i; |
| |
| /* Add NAPI objects */ |
| for_each_napi_queue(bp, i) |
| netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), |
| bnx2x_poll, BNX2X_NAPI_WEIGHT); |
| } |
| |
| static inline void bnx2x_del_all_napi(struct bnx2x *bp) |
| { |
| int i; |
| |
| for_each_napi_queue(bp, i) |
| netif_napi_del(&bnx2x_fp(bp, i, napi)); |
| } |
| |
| static inline void bnx2x_disable_msi(struct bnx2x *bp) |
| { |
| if (bp->flags & USING_MSIX_FLAG) { |
| pci_disable_msix(bp->pdev); |
| bp->flags &= ~USING_MSIX_FLAG; |
| } else if (bp->flags & USING_MSI_FLAG) { |
| pci_disable_msi(bp->pdev); |
| bp->flags &= ~USING_MSI_FLAG; |
| } |
| } |
| |
| static inline int bnx2x_calc_num_queues(struct bnx2x *bp) |
| { |
| return num_queues ? |
| min_t(int, num_queues, BNX2X_MAX_QUEUES(bp)) : |
| min_t(int, num_online_cpus(), BNX2X_MAX_QUEUES(bp)); |
| } |
| |
| static inline void bnx2x_clear_sge_mask_next_elems(struct bnx2x_fastpath *fp) |
| { |
| int i, j; |
| |
| for (i = 1; i <= NUM_RX_SGE_PAGES; i++) { |
| int idx = RX_SGE_CNT * i - 1; |
| |
| for (j = 0; j < 2; j++) { |
| SGE_MASK_CLEAR_BIT(fp, idx); |
| idx--; |
| } |
| } |
| } |
| |
| static inline void bnx2x_init_sge_ring_bit_mask(struct bnx2x_fastpath *fp) |
| { |
| /* Set the mask to all 1-s: it's faster to compare to 0 than to 0xf-s */ |
| memset(fp->sge_mask, 0xff, |
| (NUM_RX_SGE >> RX_SGE_MASK_ELEM_SHIFT)*sizeof(u64)); |
| |
| /* Clear the two last indices in the page to 1: |
| these are the indices that correspond to the "next" element, |
| hence will never be indicated and should be removed from |
| the calculations. */ |
| bnx2x_clear_sge_mask_next_elems(fp); |
| } |
| |
| static inline int bnx2x_alloc_rx_sge(struct bnx2x *bp, |
| struct bnx2x_fastpath *fp, u16 index) |
| { |
| struct page *page = alloc_pages(GFP_ATOMIC, PAGES_PER_SGE_SHIFT); |
| struct sw_rx_page *sw_buf = &fp->rx_page_ring[index]; |
| struct eth_rx_sge *sge = &fp->rx_sge_ring[index]; |
| dma_addr_t mapping; |
| |
| if (unlikely(page == NULL)) |
| return -ENOMEM; |
| |
| mapping = dma_map_page(&bp->pdev->dev, page, 0, |
| SGE_PAGE_SIZE*PAGES_PER_SGE, DMA_FROM_DEVICE); |
| if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { |
| __free_pages(page, PAGES_PER_SGE_SHIFT); |
| return -ENOMEM; |
| } |
| |
| sw_buf->page = page; |
| dma_unmap_addr_set(sw_buf, mapping, mapping); |
| |
| sge->addr_hi = cpu_to_le32(U64_HI(mapping)); |
| sge->addr_lo = cpu_to_le32(U64_LO(mapping)); |
| |
| return 0; |
| } |
| |
| static inline int bnx2x_alloc_rx_skb(struct bnx2x *bp, |
| struct bnx2x_fastpath *fp, u16 index) |
| { |
| struct sk_buff *skb; |
| struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[index]; |
| struct eth_rx_bd *rx_bd = &fp->rx_desc_ring[index]; |
| dma_addr_t mapping; |
| |
| skb = netdev_alloc_skb(bp->dev, fp->rx_buf_size); |
| if (unlikely(skb == NULL)) |
| return -ENOMEM; |
| |
| mapping = dma_map_single(&bp->pdev->dev, skb->data, fp->rx_buf_size, |
| DMA_FROM_DEVICE); |
| if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { |
| dev_kfree_skb_any(skb); |
| return -ENOMEM; |
| } |
| |
| rx_buf->skb = skb; |
| dma_unmap_addr_set(rx_buf, mapping, mapping); |
| |
| rx_bd->addr_hi = cpu_to_le32(U64_HI(mapping)); |
| rx_bd->addr_lo = cpu_to_le32(U64_LO(mapping)); |
| |
| return 0; |
| } |
| |
| /* note that we are not allocating a new skb, |
| * we are just moving one from cons to prod |
| * we are not creating a new mapping, |
| * so there is no need to check for dma_mapping_error(). |
| */ |
| static inline void bnx2x_reuse_rx_skb(struct bnx2x_fastpath *fp, |
| u16 cons, u16 prod) |
| { |
| struct bnx2x *bp = fp->bp; |
| struct sw_rx_bd *cons_rx_buf = &fp->rx_buf_ring[cons]; |
| struct sw_rx_bd *prod_rx_buf = &fp->rx_buf_ring[prod]; |
| struct eth_rx_bd *cons_bd = &fp->rx_desc_ring[cons]; |
| struct eth_rx_bd *prod_bd = &fp->rx_desc_ring[prod]; |
| |
| dma_sync_single_for_device(&bp->pdev->dev, |
| dma_unmap_addr(cons_rx_buf, mapping), |
| RX_COPY_THRESH, DMA_FROM_DEVICE); |
| |
| prod_rx_buf->skb = cons_rx_buf->skb; |
| dma_unmap_addr_set(prod_rx_buf, mapping, |
| dma_unmap_addr(cons_rx_buf, mapping)); |
| *prod_bd = *cons_bd; |
| } |
| |
| static inline void bnx2x_free_rx_sge_range(struct bnx2x *bp, |
| struct bnx2x_fastpath *fp, int last) |
| { |
| int i; |
| |
| if (fp->disable_tpa) |
| return; |
| |
| for (i = 0; i < last; i++) |
| bnx2x_free_rx_sge(bp, fp, i); |
| } |
| |
| static inline void bnx2x_free_tpa_pool(struct bnx2x *bp, |
| struct bnx2x_fastpath *fp, int last) |
| { |
| int i; |
| |
| for (i = 0; i < last; i++) { |
| struct sw_rx_bd *rx_buf = &(fp->tpa_pool[i]); |
| struct sk_buff *skb = rx_buf->skb; |
| |
| if (skb == NULL) { |
| DP(NETIF_MSG_IFDOWN, "tpa bin %d empty on free\n", i); |
| continue; |
| } |
| |
| if (fp->tpa_state[i] == BNX2X_TPA_START) |
| dma_unmap_single(&bp->pdev->dev, |
| dma_unmap_addr(rx_buf, mapping), |
| fp->rx_buf_size, DMA_FROM_DEVICE); |
| |
| dev_kfree_skb(skb); |
| rx_buf->skb = NULL; |
| } |
| } |
| |
| static inline void bnx2x_init_tx_ring_one(struct bnx2x_fastpath *fp) |
| { |
| int i; |
| |
| for (i = 1; i <= NUM_TX_RINGS; i++) { |
| struct eth_tx_next_bd *tx_next_bd = |
| &fp->tx_desc_ring[TX_DESC_CNT * i - 1].next_bd; |
| |
| tx_next_bd->addr_hi = |
| cpu_to_le32(U64_HI(fp->tx_desc_mapping + |
| BCM_PAGE_SIZE*(i % NUM_TX_RINGS))); |
| tx_next_bd->addr_lo = |
| cpu_to_le32(U64_LO(fp->tx_desc_mapping + |
| BCM_PAGE_SIZE*(i % NUM_TX_RINGS))); |
| } |
| |
| SET_FLAG(fp->tx_db.data.header.header, DOORBELL_HDR_DB_TYPE, 1); |
| fp->tx_db.data.zero_fill1 = 0; |
| fp->tx_db.data.prod = 0; |
| |
| fp->tx_pkt_prod = 0; |
| fp->tx_pkt_cons = 0; |
| fp->tx_bd_prod = 0; |
| fp->tx_bd_cons = 0; |
| fp->tx_pkt = 0; |
| } |
| |
| static inline void bnx2x_init_tx_rings(struct bnx2x *bp) |
| { |
| int i; |
| |
| for_each_tx_queue(bp, i) |
| bnx2x_init_tx_ring_one(&bp->fp[i]); |
| } |
| |
| static inline void bnx2x_set_next_page_rx_bd(struct bnx2x_fastpath *fp) |
| { |
| int i; |
| |
| for (i = 1; i <= NUM_RX_RINGS; i++) { |
| struct eth_rx_bd *rx_bd; |
| |
| rx_bd = &fp->rx_desc_ring[RX_DESC_CNT * i - 2]; |
| rx_bd->addr_hi = |
| cpu_to_le32(U64_HI(fp->rx_desc_mapping + |
| BCM_PAGE_SIZE*(i % NUM_RX_RINGS))); |
| rx_bd->addr_lo = |
| cpu_to_le32(U64_LO(fp->rx_desc_mapping + |
| BCM_PAGE_SIZE*(i % NUM_RX_RINGS))); |
| } |
| } |
| |
| static inline void bnx2x_set_next_page_sgl(struct bnx2x_fastpath *fp) |
| { |
| int i; |
| |
| for (i = 1; i <= NUM_RX_SGE_PAGES; i++) { |
| struct eth_rx_sge *sge; |
| |
| sge = &fp->rx_sge_ring[RX_SGE_CNT * i - 2]; |
| sge->addr_hi = |
| cpu_to_le32(U64_HI(fp->rx_sge_mapping + |
| BCM_PAGE_SIZE*(i % NUM_RX_SGE_PAGES))); |
| |
| sge->addr_lo = |
| cpu_to_le32(U64_LO(fp->rx_sge_mapping + |
| BCM_PAGE_SIZE*(i % NUM_RX_SGE_PAGES))); |
| } |
| } |
| |
| static inline void bnx2x_set_next_page_rx_cq(struct bnx2x_fastpath *fp) |
| { |
| int i; |
| for (i = 1; i <= NUM_RCQ_RINGS; i++) { |
| struct eth_rx_cqe_next_page *nextpg; |
| |
| nextpg = (struct eth_rx_cqe_next_page *) |
| &fp->rx_comp_ring[RCQ_DESC_CNT * i - 1]; |
| nextpg->addr_hi = |
| cpu_to_le32(U64_HI(fp->rx_comp_mapping + |
| BCM_PAGE_SIZE*(i % NUM_RCQ_RINGS))); |
| nextpg->addr_lo = |
| cpu_to_le32(U64_LO(fp->rx_comp_mapping + |
| BCM_PAGE_SIZE*(i % NUM_RCQ_RINGS))); |
| } |
| } |
| |
| /* Returns the number of actually allocated BDs */ |
| static inline int bnx2x_alloc_rx_bds(struct bnx2x_fastpath *fp, |
| int rx_ring_size) |
| { |
| struct bnx2x *bp = fp->bp; |
| u16 ring_prod, cqe_ring_prod; |
| int i; |
| |
| fp->rx_comp_cons = 0; |
| cqe_ring_prod = ring_prod = 0; |
| |
| /* This routine is called only during fo init so |
| * fp->eth_q_stats.rx_skb_alloc_failed = 0 |
| */ |
| for (i = 0; i < rx_ring_size; i++) { |
| if (bnx2x_alloc_rx_skb(bp, fp, ring_prod) < 0) { |
| fp->eth_q_stats.rx_skb_alloc_failed++; |
| continue; |
| } |
| ring_prod = NEXT_RX_IDX(ring_prod); |
| cqe_ring_prod = NEXT_RCQ_IDX(cqe_ring_prod); |
| WARN_ON(ring_prod <= (i - fp->eth_q_stats.rx_skb_alloc_failed)); |
| } |
| |
| if (fp->eth_q_stats.rx_skb_alloc_failed) |
| BNX2X_ERR("was only able to allocate " |
| "%d rx skbs on queue[%d]\n", |
| (i - fp->eth_q_stats.rx_skb_alloc_failed), fp->index); |
| |
| fp->rx_bd_prod = ring_prod; |
| /* Limit the CQE producer by the CQE ring size */ |
| fp->rx_comp_prod = min_t(u16, NUM_RCQ_RINGS*RCQ_DESC_CNT, |
| cqe_ring_prod); |
| fp->rx_pkt = fp->rx_calls = 0; |
| |
| return i - fp->eth_q_stats.rx_skb_alloc_failed; |
| } |
| |
| #ifdef BCM_CNIC |
| static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp) |
| { |
| bnx2x_fcoe(bp, cl_id) = BNX2X_FCOE_ETH_CL_ID + |
| BP_E1HVN(bp) * NONE_ETH_CONTEXT_USE; |
| bnx2x_fcoe(bp, cid) = BNX2X_FCOE_ETH_CID; |
| bnx2x_fcoe(bp, fw_sb_id) = DEF_SB_ID; |
| bnx2x_fcoe(bp, igu_sb_id) = bp->igu_dsb_id; |
| bnx2x_fcoe(bp, bp) = bp; |
| bnx2x_fcoe(bp, state) = BNX2X_FP_STATE_CLOSED; |
| bnx2x_fcoe(bp, index) = FCOE_IDX; |
| bnx2x_fcoe(bp, rx_cons_sb) = BNX2X_FCOE_L2_RX_INDEX; |
| bnx2x_fcoe(bp, tx_cons_sb) = BNX2X_FCOE_L2_TX_INDEX; |
| /* qZone id equals to FW (per path) client id */ |
| bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fcoe(bp, cl_id) + |
| BP_PORT(bp)*(CHIP_IS_E2(bp) ? ETH_MAX_RX_CLIENTS_E2 : |
| ETH_MAX_RX_CLIENTS_E1H); |
| /* init shortcut */ |
| bnx2x_fcoe(bp, ustorm_rx_prods_offset) = CHIP_IS_E2(bp) ? |
| USTORM_RX_PRODS_E2_OFFSET(bnx2x_fcoe(bp, cl_qzone_id)) : |
| USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), bnx2x_fcoe_fp(bp)->cl_id); |
| |
| } |
| #endif |
| |
| static inline void __storm_memset_struct(struct bnx2x *bp, |
| u32 addr, size_t size, u32 *data) |
| { |
| int i; |
| for (i = 0; i < size/4; i++) |
| REG_WR(bp, addr + (i * 4), data[i]); |
| } |
| |
| static inline void storm_memset_mac_filters(struct bnx2x *bp, |
| struct tstorm_eth_mac_filter_config *mac_filters, |
| u16 abs_fid) |
| { |
| size_t size = sizeof(struct tstorm_eth_mac_filter_config); |
| |
| u32 addr = BAR_TSTRORM_INTMEM + |
| TSTORM_MAC_FILTER_CONFIG_OFFSET(abs_fid); |
| |
| __storm_memset_struct(bp, addr, size, (u32 *)mac_filters); |
| } |
| |
| static inline void storm_memset_cmng(struct bnx2x *bp, |
| struct cmng_struct_per_port *cmng, |
| u8 port) |
| { |
| size_t size = |
| sizeof(struct rate_shaping_vars_per_port) + |
| sizeof(struct fairness_vars_per_port) + |
| sizeof(struct safc_struct_per_port) + |
| sizeof(struct pfc_struct_per_port); |
| |
| u32 addr = BAR_XSTRORM_INTMEM + |
| XSTORM_CMNG_PER_PORT_VARS_OFFSET(port); |
| |
| __storm_memset_struct(bp, addr, size, (u32 *)cmng); |
| |
| addr += size + 4 /* SKIP DCB+LLFC */; |
| size = sizeof(struct cmng_struct_per_port) - |
| size /* written */ - 4 /*skipped*/; |
| |
| __storm_memset_struct(bp, addr, size, |
| (u32 *)(cmng->traffic_type_to_priority_cos)); |
| } |
| |
| /* HW Lock for shared dual port PHYs */ |
| void bnx2x_acquire_phy_lock(struct bnx2x *bp); |
| void bnx2x_release_phy_lock(struct bnx2x *bp); |
| |
| /** |
| * bnx2x_extract_max_cfg - extract MAX BW part from MF configuration. |
| * |
| * @bp: driver handle |
| * @mf_cfg: MF configuration |
| * |
| */ |
| static inline u16 bnx2x_extract_max_cfg(struct bnx2x *bp, u32 mf_cfg) |
| { |
| u16 max_cfg = (mf_cfg & FUNC_MF_CFG_MAX_BW_MASK) >> |
| FUNC_MF_CFG_MAX_BW_SHIFT; |
| if (!max_cfg) { |
| BNX2X_ERR("Illegal configuration detected for Max BW - " |
| "using 100 instead\n"); |
| max_cfg = 100; |
| } |
| return max_cfg; |
| } |
| |
| #endif /* BNX2X_CMN_H */ |