Merge tag 'imx-dt-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
Merge "i.MX device tree changes for 3.15" from Shawn Guo:
- New SoC device tree support for imx35 and imx50
- A good number of new board support: imx25-eukrea, imx28-duckbill,
imx28-eukrea, Eukrea cpuimx35, imx50-evk, imx51-eukrea, imx53-voipac,
MCIMX53-START-R and Ka-Ro TX53.
- Quite some updates and tweaking on imx27 phycore and apf27dev boards
- Add pinfunc headers for imx25, imx27 and imx50
- Make pinctrl nodes board specific to avoid floating board specific
device tree blob with so many unused pinctrl data
- Use generic node name for fixed regulator
- Use clock defines in imx5 DTS files
- Use macros for interrupt and gpio flags
- A plenty of random updates on various SoC and board device tree
sources, adding pinctrl settings, device nodes, properties, aliases.
* tag 'imx-dt-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6: (89 commits)
ARM: dts: imx28-m28cu3: Remove 'reset-active-high'
ARM: dts: imx5: use imx51-ssi
ARM: dts: imx51: Add mmc aliases
ARM: dts: imx53: Add mmc aliases
ARM: dts: imx53: add support for Ka-Ro TX53 modules
ARM: dts: Add support for the cpuimx35 board from Eukrea and its baseboard.
ARM: dts: imx28-apf28dev: add user button
ARM: dts: i.MX51: Switch to use standard definitions for input subsystem
ARM: dts: i.MX53: add support for MCIMX53-START-R
ARM: dts: i.MX53: move common QSB nodes to new file
ARM: dts: imx53-evk: Remove board support
ARM: dts: vf610: use the interrupt macros
ARM: dts: imx53: Add gpio and input dt includes.
ARM: dts: i.MX27: Add SSI nodes
ARM: dts: mxs: add mxs phy controller id
ARM: dts: imx27-phytec-phycore-rdk: Add pinctrl definitions for WEIM
ARM: dts: imx27-phytec-phycore-rdk: Add pingrp for SDHC
ARM: dts: imx27-phytec-phycore-som: Add spi-cs-high property to PMIC
ARM: dts: imx27-phytec-phycore-rdk: Enable 1-Wire module
ARM: dts: imx27-phytec-phycore-som: Add NFC pin group
...
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 35f935f..e9d19e2 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -35,6 +35,7 @@
epfl Ecole Polytechnique Fédérale de Lausanne
epson Seiko Epson Corp.
est ESTeem Wireless Modems
+eukrea Eukréa Electromatique
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
@@ -92,6 +93,7 @@
toumaz Toumaz
v3 V3 Semiconductor
via VIA Technologies, Inc.
+voipac Voipac Technologies s.r.o.
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d1599a7..0b805c8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -134,25 +134,31 @@
armada-xp-matrix.dtb \
armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_ARCH_MXC) += \
+ imx25-eukrea-mbimxsd25-baseboard.dtb \
imx25-karo-tx25.dtb \
imx25-pdk.dtb \
imx27-apf27.dtb \
imx27-apf27dev.dtb \
imx27-pdk.dtb \
- imx27-phytec-phycore-som.dtb \
imx27-phytec-phycore-rdk.dtb \
imx27-phytec-phycard-s-som.dtb \
imx27-phytec-phycard-s-rdk.dtb \
imx31-bug.dtb \
+ imx35-eukrea-mbimxsd35-baseboard.dtb \
+ imx50-evk.dtb \
imx51-apf51.dtb \
imx51-apf51dev.dtb \
imx51-babbage.dtb \
+ imx51-eukrea-mbimxsd51-baseboard.dtb \
imx53-ard.dtb \
- imx53-evk.dtb \
imx53-m53evk.dtb \
imx53-mba53.dtb \
imx53-qsb.dtb \
+ imx53-qsrb.dtb \
imx53-smd.dtb \
+ imx53-tx53-x03x.dtb \
+ imx53-tx53-x13x.dtb \
+ imx53-voipac-bsb.dtb \
imx6dl-cubox-i.dtb \
imx6dl-dfi-fs700-m60.dtb \
imx6dl-gw51xx.dtb \
@@ -200,6 +206,9 @@
imx28-cfa10056.dtb \
imx28-cfa10057.dtb \
imx28-cfa10058.dtb \
+ imx28-duckbill.dtb \
+ imx28-eukrea-mbmx283lc.dtb \
+ imx28-eukrea-mbmx287lc.dtb \
imx28-evk.dtb \
imx28-m28cu3.dtb \
imx28-m28evk.dtb \
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 1f026ad..a33f66c 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -127,17 +127,21 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_vddio_sd0: vddio-sd0 {
+ reg_vddio_sd0: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 29 0>;
};
- reg_lcd_3v3: lcd-3v3 {
+ reg_lcd_3v3: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 526bfdb..7e6eef2 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -100,9 +100,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index cb64e2b..455169e 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -66,9 +66,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_vddio_sd0: vddio-sd0 {
+ reg_vddio_sd0: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 581b754..bbcfb5a 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -23,6 +23,7 @@
serial1 = &auart1;
spi0 = &ssp0;
spi1 = &ssp1;
+ usbphy0 = &usbphy0;
};
cpus {
@@ -428,7 +429,7 @@
status = "disabled";
};
- lradc@80050000 {
+ lradc: lradc@80050000 {
compatible = "fsl,imx23-lradc";
reg = <0x80050000 0x2000>;
interrupts = <36 37 38 39 40 41 42 43 44>;
@@ -526,4 +527,9 @@
status = "disabled";
};
};
+
+ iio_hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&lradc 8>;
+ };
};
diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
new file mode 100644
index 0000000..d6f2764
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX25";
+ compatible = "eukrea,cpuimx25", "fsl,imx25";
+
+ memory {
+ reg = <0x80000000 0x4000000>; /* 64M */
+ };
+};
+
+&fec {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ imx25-eukrea-cpuimx25 {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
+ MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
+ >;
+ };
+ };
+};
+
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
new file mode 100644
index 0000000..62fb3da
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -0,0 +1,174 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx25-eukrea-cpuimx25.dtsi"
+
+/ {
+ model = "Eukrea MBIMXSD25";
+ compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+
+ bp1 {
+ label = "BP1";
+ gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioled>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sound {
+ compatible = "eukrea,asoc-tlv320";
+ eukrea,model = "imx25-eukrea-tlv320aic23";
+ ssi-controller = <&ssi1>;
+ fsl,mux-int-port = <1>;
+ fsl,mux-ext-port = <5>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio1 20>;
+ status = "okay";
+};
+
+&i2c1 {
+ tlv320aic23: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+};
+
+&iomuxc {
+ imx25-eukrea-mbimxsd25-baseboard {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX25_PAD_KPP_COL3__AUD5_TXFS 0xe0
+ MX25_PAD_KPP_COL2__AUD5_TXC 0xe0
+ MX25_PAD_KPP_COL1__AUD5_RXD 0xe0
+ MX25_PAD_KPP_COL0__AUD5_TXD 0xe0
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX25_PAD_SD1_CMD__SD1_CMD 0x400000c0
+ MX25_PAD_SD1_CLK__SD1_CLK 0x400000c0
+ MX25_PAD_SD1_DATA0__SD1_DATA0 0x400000c0
+ MX25_PAD_SD1_DATA1__SD1_DATA1 0x400000c0
+ MX25_PAD_SD1_DATA2__SD1_DATA2 0x400000c0
+ MX25_PAD_SD1_DATA3__SD1_DATA3 0x400000c0
+ >;
+ };
+
+ pinctrl_gpiokeys: gpiokeysgrp {
+ fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
+ };
+
+ pinctrl_gpioled: gpioledgrp {
+ fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
+ };
+
+ pinctrl_lcdc: lcdcgrp {
+ fsl,pins = <
+ MX25_PAD_LD0__LD0 0x1
+ MX25_PAD_LD1__LD1 0x1
+ MX25_PAD_LD2__LD2 0x1
+ MX25_PAD_LD3__LD3 0x1
+ MX25_PAD_LD4__LD4 0x1
+ MX25_PAD_LD5__LD5 0x1
+ MX25_PAD_LD6__LD6 0x1
+ MX25_PAD_LD7__LD7 0x1
+ MX25_PAD_LD8__LD8 0x1
+ MX25_PAD_LD9__LD9 0x1
+ MX25_PAD_LD10__LD10 0x1
+ MX25_PAD_LD11__LD11 0x1
+ MX25_PAD_LD12__LD12 0x1
+ MX25_PAD_LD13__LD13 0x1
+ MX25_PAD_LD14__LD14 0x1
+ MX25_PAD_LD15__LD15 0x1
+ MX25_PAD_GPIO_E__LD16 0x1
+ MX25_PAD_GPIO_F__LD17 0x1
+ MX25_PAD_HSYNC__HSYNC 0x80000000
+ MX25_PAD_VSYNC__VSYNC 0x80000000
+ MX25_PAD_LSCLK__LSCLK 0x80000000
+ MX25_PAD_OE_ACD__OE_ACD 0x80000000
+ MX25_PAD_CONTRAST__CONTRAST 0x80000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX25_PAD_UART1_RTS__UART1_RTS 0xe0
+ MX25_PAD_UART1_CTS__UART1_CTS 0xe0
+ MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+ MX25_PAD_UART1_RXD__UART1_RXD 0xc0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX25_PAD_UART2_RXD__UART2_RXD 0x80000000
+ MX25_PAD_UART2_TXD__UART2_TXD 0x80000000
+ MX25_PAD_UART2_RTS__UART2_RTS 0x80000000
+ MX25_PAD_UART2_CTS__UART2_CTS 0x80000000
+ >;
+ };
+ };
+};
+
+&ssi1 {
+ codec-handle = <&tlv320aic23>;
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
new file mode 100644
index 0000000..9238a95
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -0,0 +1,494 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ * Based on imx35-pinfunc.h in the same directory Which is:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX25_PINFUNC_H
+#define __DTS_IMX25_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000
+#define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000
+#define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000
+
+#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000
+#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000
+
+#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000
+#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000
+
+#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000
+#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000
+#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000
+
+#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000
+#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000
+#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000
+
+#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000
+#define MX25_PAD_A19__FEC_RX_ER 0x024 0x240 0x518 0x17 0x000
+#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000
+
+#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000
+#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000
+#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000
+
+#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000
+#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000
+#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000
+
+#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000
+#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000
+#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000
+
+#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000
+#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000
+#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000
+
+#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000
+#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x15 0x000
+#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x17 0x000
+
+#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x10 0x000
+#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x14 0x000
+#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x15 0x000
+
+#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x10 0x000
+#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x14 0x000
+#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x15 0x000
+
+#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x10 0x000
+#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x14 0x000
+#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x15 0x000
+
+#define MX25_PAD_CS0__CS0 0x04c 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS0__GPIO_4_2 0x04c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS1__CS1 0x050 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS1__NF_CE3 0x050 0x000 0x000 0x01 0x000
+#define MX25_PAD_CS1__GPIO_4_3 0x050 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x10 0x000
+#define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000
+#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x13 0x000
+#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x15 0x000
+
+#define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x10 0x000
+#define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000
+#define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x13 0x000
+#define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x15 0x000
+
+#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x10 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x15 0x000
+
+#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x10 0x000
+#define MX25_PAD_ECB__UART5_TXD_MUX 0x060 0x270 0x000 0x13 0x000
+#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x15 0x000
+
+#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x10 0x000
+#define MX25_PAD_LBA__UART5_RXD_MUX 0x064 0x274 0x578 0x13 0x000
+#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x15 0x000
+
+#define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000
+#define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x10 0x000
+#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x14 0x000
+#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x15 0x000
+
+#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x10 0x000
+#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x15 0x000
+
+#define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000
+#define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000
+#define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000
+
+#define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000
+#define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000
+#define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000
+
+#define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000
+#define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000
+#define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000
+
+#define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000
+#define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000
+
+#define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000
+#define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000
+
+#define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000
+#define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000
+#define MX25_PAD_D10__USBOTG_OC 0x09c 0x294 0x57c 0x06 0x000
+
+#define MX25_PAD_D9__D9 0x0a0 0x298 0x000 0x00 0x000
+#define MX25_PAD_D9__GPIO_4_11 0x0a0 0x298 0x000 0x05 0x000
+#define MX25_PAD_D9__USBH2_PWR 0x0a0 0x298 0x000 0x06 0x000
+
+#define MX25_PAD_D8__D8 0x0a4 0x29c 0x000 0x00 0x000
+#define MX25_PAD_D8__GPIO_4_12 0x0a4 0x29c 0x000 0x05 0x000
+#define MX25_PAD_D8__USBH2_OC 0x0a4 0x29c 0x580 0x06 0x000
+
+#define MX25_PAD_D7__D7 0x0a8 0x2a0 0x000 0x00 0x000
+#define MX25_PAD_D7__GPIO_4_13 0x0a8 0x2a0 0x000 0x05 0x000
+
+#define MX25_PAD_D6__D6 0x0ac 0x2a4 0x000 0x00 0x000
+#define MX25_PAD_D6__GPIO_4_14 0x0ac 0x2a4 0x000 0x05 0x000
+
+#define MX25_PAD_D5__D5 0x0b0 0x2a8 0x000 0x00 0x000
+#define MX25_PAD_D5__GPIO_4_15 0x0b0 0x2a8 0x000 0x05 0x000
+
+#define MX25_PAD_D4__D4 0x0b4 0x2ac 0x000 0x00 0x000
+#define MX25_PAD_D4__GPIO_4_16 0x0b4 0x2ac 0x000 0x05 0x000
+
+#define MX25_PAD_D3__D3 0x0b8 0x2b0 0x000 0x00 0x000
+#define MX25_PAD_D3__GPIO_4_17 0x0b8 0x2b0 0x000 0x05 0x000
+
+#define MX25_PAD_D2__D2 0x0bc 0x2b4 0x000 0x00 0x000
+#define MX25_PAD_D2__GPIO_4_18 0x0bc 0x2b4 0x000 0x05 0x000
+
+#define MX25_PAD_D1__D1 0x0c0 0x2b8 0x000 0x00 0x000
+#define MX25_PAD_D1__GPIO_4_19 0x0c0 0x2b8 0x000 0x05 0x000
+
+#define MX25_PAD_D0__D0 0x0c4 0x2bc 0x000 0x00 0x000
+#define MX25_PAD_D0__GPIO_4_20 0x0c4 0x2bc 0x000 0x05 0x000
+
+#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x10 0x000
+#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x12 0x000
+#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x15 0x000
+
+#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x10 0x000
+#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x12 0x000
+#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x15 0x000
+
+#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x10 0x000
+#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x15 0x000
+
+#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x10 0x000
+#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x15 0x000
+
+#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x10 0x000
+#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x15 0x000
+
+#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x10 0x000
+#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x15 0x000
+
+#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x10 0x000
+#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x15 0x000
+
+#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x10 0x000
+#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x15 0x000
+
+#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000
+
+#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000
+#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001
+
+#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000
+#define MX25_PAD_LD10__FEC_RX_ER 0x0f0 0x2e8 0x518 0x15 0x001
+
+#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000
+#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001
+
+#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001
+
+#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000
+
+#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000
+
+#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001
+
+#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x15 0x000
+
+#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x10 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x15 0x000
+
+#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x10 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000
+
+#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000
+
+#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001
+
+#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x10 0x000
+#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x15 0x000
+#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x16 0x001
+
+#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001
+
+#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000
+#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001
+#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000
+#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000
+#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000
+#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000
+#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000
+#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x10 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x10 0x000
+#define MX25_PAD_UART1_RXD__GPIO_4_22 0x170 0x368 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_TXD__UART1_TXD 0x174 0x36c 0x000 0x10 0x000
+#define MX25_PAD_UART1_TXD__GPIO_4_23 0x174 0x36c 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RTS__UART1_RTS 0x178 0x370 0x000 0x10 0x000
+#define MX25_PAD_UART1_RTS__CSI_D0 0x178 0x370 0x488 0x11 0x001
+#define MX25_PAD_UART1_RTS__GPIO_4_24 0x178 0x370 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_CTS__UART1_CTS 0x17c 0x374 0x000 0x10 0x000
+#define MX25_PAD_UART1_CTS__CSI_D1 0x17c 0x374 0x48c 0x11 0x001
+#define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x10 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x10 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x10 0x000
+#define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x12 0x002
+#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002
+#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000
+#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000
+#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x13 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x15 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x10 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW0__GPIO_2_29 0x1a8 0x3a0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1 0x1ac 0x3a4 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW1__GPIO_2_30 0x1ac 0x3a4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2 0x1b0 0x3a8 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW2__CSI_D0 0x1b0 0x3a8 0x488 0x13 0x002
+#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW3__CSI_LD1 0x1b4 0x3ac 0x48c 0x13 0x002
+#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD_MUX 0x1b8 0x3b0 0x570 0x11 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD_MUX 0x1bc 0x3b4 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x12 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x12 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x12 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000
+#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x15 0x000
+
+#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x10 0x000
+#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x11 0x000
+#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x15 0x000
+
+#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000
+#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000
+
+#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
+
+#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000
+
+#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000
+#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001
+#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001
+
+#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000
+#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000
+
+#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000
+#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000
+#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001
+
+#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000
+#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000
+
+#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x10 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x10 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x14 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x15 0x000
+
+#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x10 0x000
+#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x15 0x000
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000
+
+#endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 737ed5d..32f760e 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -10,6 +10,7 @@
*/
#include "skeleton.dtsi"
+#include "imx25-pinfunc.h"
/ {
aliases {
@@ -173,12 +174,12 @@
status = "disabled";
};
- iomuxc@43fac000{
+ iomuxc: iomuxc@43fac000 {
compatible = "fsl,imx25-iomuxc";
reg = <0x43fac000 0x4000>;
};
- audmux@43fb0000 {
+ audmux: audmux@43fb0000 {
compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
reg = <0x43fb0000 0x4000>;
status = "disabled";
@@ -236,6 +237,11 @@
compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <11>;
+ clocks = <&clks 118>;
+ clock-names = "ipg";
+ dmas = <&sdma 24 1 0>,
+ <&sdma 25 1 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -266,6 +272,11 @@
compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
reg = <0x50034000 0x4000>;
interrupts = <12>;
+ clocks = <&clks 117>;
+ clock-names = "ipg";
+ dmas = <&sdma 28 1 0>,
+ <&sdma 29 1 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -436,13 +447,14 @@
#interrupt-cells = <2>;
};
- sdma@53fd4000 {
+ sdma: sdma@53fd4000 {
compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
reg = <0x53fd4000 0x4000>;
clocks = <&clks 112>, <&clks 68>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
interrupts = <34>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
};
wdog@53fdc000 {
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
index ba4c6df..09f57b3 100644
--- a/arch/arm/boot/dts/imx27-apf27.dts
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -34,11 +34,49 @@
};
};
+&iomuxc {
+ imx27-apf27 {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ >;
+ };
+ };
+};
+
&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 47c8c26..2b6d489 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -22,10 +22,10 @@
bits-per-pixel = <16>; /* non-standard but required */
fsl,pcr = <0xfae80083>; /* non-standard but required */
display-timings {
- timing0: 640x480 {
+ timing0: 800x480 {
clock-frequency = <33000033>;
hactive = <800>;
- vactive = <640>;
+ vactive = <480>;
hback-porch = <96>;
hfront-porch = <96>;
vback-porch = <20>;
@@ -38,20 +38,24 @@
gpio-keys {
compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
user-key {
label = "user";
- gpios = <&gpio6 13 0>;
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
linux,code = <276>; /* BTN_EXTRA */
};
};
leds {
compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
user {
label = "Heartbeat";
- gpios = <&gpio6 14 0>;
+ gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
@@ -59,25 +63,34 @@
&cspi1 {
fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio4 28 1>;
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
status = "okay";
};
&cspi2 {
fsl,spi-num-chipselects = <3>;
- cs-gpios = <&gpio4 21 1>, <&gpio4 27 1>,
- <&gpio2 17 1>;
+ cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
+ <&gpio4 27 GPIO_ACTIVE_LOW>,
+ <&gpio2 17 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
status = "okay";
};
&fb {
display = <&display>;
fsl,dmacr = <0x00020010>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_imxfb1>;
status = "okay";
};
&i2c1 {
clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
rtc@68 {
@@ -87,5 +100,127 @@
};
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
+
+&iomuxc {
+ imx27-apf27dev {
+ pinctrl_cspi1: cspi1grp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+ MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+ >;
+ };
+
+ pinctrl_cspi1_cs: cspi1csgrp {
+ fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
+ };
+
+ pinctrl_cspi2: cspi2grp {
+ fsl,pins = <
+ MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+ MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+ MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+ >;
+ };
+
+ pinctrl_cspi2_cs: cspi2csgrp {
+ fsl,pins = <
+ MX27_PAD_CSI_D5__GPIO2_17 0x0
+ MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
+ MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
+ };
+
+ pinctrl_imxfb1: imxfbgrp {
+ fsl,pins = <
+ MX27_PAD_CLS__CLS 0x0
+ MX27_PAD_CONTRAST__CONTRAST 0x0
+ MX27_PAD_LD0__LD0 0x0
+ MX27_PAD_LD1__LD1 0x0
+ MX27_PAD_LD2__LD2 0x0
+ MX27_PAD_LD3__LD3 0x0
+ MX27_PAD_LD4__LD4 0x0
+ MX27_PAD_LD5__LD5 0x0
+ MX27_PAD_LD6__LD6 0x0
+ MX27_PAD_LD7__LD7 0x0
+ MX27_PAD_LD8__LD8 0x0
+ MX27_PAD_LD9__LD9 0x0
+ MX27_PAD_LD10__LD10 0x0
+ MX27_PAD_LD11__LD11 0x0
+ MX27_PAD_LD12__LD12 0x0
+ MX27_PAD_LD13__LD13 0x0
+ MX27_PAD_LD14__LD14 0x0
+ MX27_PAD_LD15__LD15 0x0
+ MX27_PAD_LD16__LD16 0x0
+ MX27_PAD_LD17__LD17 0x0
+ MX27_PAD_LSCLK__LSCLK 0x0
+ MX27_PAD_OE_ACD__OE_ACD 0x0
+ MX27_PAD_PS__PS 0x0
+ MX27_PAD_REV__REV 0x0
+ MX27_PAD_SPL_SPR__SPL_SPR 0x0
+ MX27_PAD_HSYNC__HSYNC 0x0
+ MX27_PAD_VSYNC__VSYNC 0x0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX27_PAD_I2C_DATA__I2C_DATA 0x0
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
+
+ pinctrl_pwm: pwmgrp {
+ fsl,pins = <
+ MX27_PAD_PWMO__PWMO 0x0
+ >;
+ };
+
+ pinctrl_sdhc2: sdhc2grp {
+ fsl,pins = <
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0
+ MX27_PAD_SD2_D0__SD2_D0 0x0
+ MX27_PAD_SD2_D1__SD2_D1 0x0
+ MX27_PAD_SD2_D2__SD2_D2 0x0
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+ >;
+ };
+
+ pinctrl_sdhc2_cd: sdhc2cdgrp {
+ fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
+ };
+ };
+};
+
+&sdhci2 {
+ bus-width = <4>;
+ cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
+ status = "okay";
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm>;
+};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 5a31c77..04cadfc 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -37,9 +37,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3v3: 3v3 {
+ reg_3v3: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -54,6 +57,8 @@
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
rtc@51 {
@@ -68,26 +73,78 @@
};
};
+&iomuxc {
+ imx27-phycard-s-rdk {
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
+
+ pinctrl_owire1: owire1grp {
+ fsl,pins = <
+ MX27_PAD_RTCK__OWIRE 0x0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX27_PAD_UART2_TXD__UART2_TXD 0x0
+ MX27_PAD_UART2_RXD__UART2_RXD 0x0
+ MX27_PAD_UART2_CTS__UART2_CTS 0x0
+ MX27_PAD_UART2_RTS__UART2_RTS 0x0
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX27_PAD_UART3_TXD__UART3_TXD 0x0
+ MX27_PAD_UART3_RXD__UART3_RXD 0x0
+ MX27_PAD_UART3_CTS__UART3_CTS 0x0
+ MX27_PAD_UART3_RTS__UART3_RTS 0x0
+ >;
+ };
+ };
+};
+
&owire {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_owire1>;
status = "okay";
};
&sdhci2 {
- cd-gpios = <&gpio3 29 0>;
+ cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart1 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
index c8d57d1..e51e550 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts
@@ -24,16 +24,54 @@
&cspi1 {
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 28 0>,
- <&gpio4 27 0>;
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+ <&gpio4 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
+&iomuxc {
+ imx27-phycard-s-som {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
+ };
+};
+
&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
at24@52 {
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 0fc6551..9f8ad51 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -7,7 +7,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-#include "imx27-phytec-phycore-som.dts"
+#include "imx27-phytec-phycore-som.dtsi"
/ {
model = "Phytec pcm970";
@@ -16,32 +16,119 @@
&cspi1 {
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+ <&gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ camgpio: pca9536@41 {
+ compatible = "nxp,pca9536";
+ reg = <0x41>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&iomuxc {
+ imx27_phycore_rdk {
+ pinctrl_i2c1: i2c1grp {
+ /* Add pullup to DATA line */
+ fsl,pins = <
+ MX27_PAD_I2C_DATA__I2C_DATA 0x1
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
+ >;
+ };
+
+ pinctrl_owire1: owire1grp {
+ fsl,pins = <
+ MX27_PAD_RTCK__OWIRE 0x0
+ >;
+ };
+
+ pinctrl_sdhc2: sdhc2grp {
+ fsl,pins = <
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0
+ MX27_PAD_SD2_D0__SD2_D0 0x0
+ MX27_PAD_SD2_D1__SD2_D1 0x0
+ MX27_PAD_SD2_D2__SD2_D2 0x0
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+ MX27_PAD_SSI3_FS__GPIO3_28 0x0 /* WP */
+ MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX27_PAD_UART2_TXD__UART2_TXD 0x0
+ MX27_PAD_UART2_RXD__UART2_RXD 0x0
+ MX27_PAD_UART2_CTS__UART2_CTS 0x0
+ MX27_PAD_UART2_RTS__UART2_RTS 0x0
+ >;
+ };
+
+ pinctrl_weim: weimgrp {
+ fsl,pins = <
+ MX27_PAD_CS4_B__CS4_B 0x0 /* CS4 */
+ MX27_PAD_SD1_D1__GPIO5_19 0x0 /* CAN IRQ */
+ >;
+ };
+ };
+};
+
+&owire {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_owire1>;
+ status = "okay";
};
&sdhci2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhc2>;
bus-width = <4>;
- cd-gpios = <&gpio3 29 0>;
- wp-gpios = <&gpio3 28 0>;
+ cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
vmmc-supply = <&vmmc1_reg>;
status = "okay";
};
&uart1 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
};
&uart2 {
fsl,uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&weim {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_weim>;
+
can@d4000000 {
compatible = "nxp,sja1000";
reg = <4 0x00000000 0x00000100>;
interrupt-parent = <&gpio5>;
- interrupts = <19 0x2>;
+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
nxp,external-clock-frequency = <16000000>;
nxp,tx-output-config = <0x16>;
nxp,no-comparator-bypass;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
similarity index 61%
rename from arch/arm/boot/dts/imx27-phytec-phycore-som.dts
rename to arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index 4ec402c..230cfaf 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -19,6 +19,20 @@
memory {
reg = <0xa0000000 0x08000000>;
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3v3: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
};
&audmux {
@@ -37,18 +51,21 @@
};
&cspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cspi1>;
fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio4 28 0>;
+ cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
status = "okay";
pmic: mc13783@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mc13783";
- spi-max-frequency = <20000000>;
reg = <0>;
+ spi-cs-high;
+ spi-max-frequency = <20000000>;
interrupt-parent = <&gpio2>;
- interrupts = <23 0x4>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
fsl,mc13xxx-uses-adc;
fsl,mc13xxx-uses-rtc;
@@ -134,12 +151,18 @@
};
&fec {
- phy-reset-gpios = <&gpio3 30 0>;
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ phy-supply = <®_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&i2c2 {
clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
at24@52 {
@@ -159,13 +182,69 @@
};
};
-&nfc {
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- status = "okay";
+&iomuxc {
+ imx27_phycore_som {
+ pinctrl_cspi1: cspi1grp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+ MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+ MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */
+ MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ MX27_PAD_SSI3_TXDAT__GPIO3_30 0x0 /* FEC RST */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX27_PAD_NFRB__NFRB 0x0
+ MX27_PAD_NFCLE__NFCLE 0x0
+ MX27_PAD_NFWP_B__NFWP_B 0x0
+ MX27_PAD_NFCE_B__NFCE_B 0x0
+ MX27_PAD_NFALE__NFALE 0x0
+ MX27_PAD_NFRE_B__NFRE_B 0x0
+ MX27_PAD_NFWE_B__NFWE_B 0x0
+ >;
+ };
+ };
};
-&uart1 {
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h
new file mode 100644
index 0000000..f5387b4
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-pinfunc.h
@@ -0,0 +1,526 @@
+/*
+ * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_IMX27_PINFUNC_H
+#define __DTS_IMX27_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function: 0 - Primary function
+ * 1 - Alternate function
+ * 2 - GPIO
+ * direction: 0 - Input
+ * 1 - Output
+ * gpio_oconf: 0 - A_IN
+ * 1 - B_IN
+ * 2 - C_IN
+ * 3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ * 1 - Interrupt Status Register
+ * 2 - 0
+ * 3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ * number on the specific port (between 0 and 31).
+ */
+
+#define MX27_PAD_USBH2_CLK__USBH2_CLK 0x00 0x000
+#define MX27_PAD_USBH2_CLK__GPIO1_0 0x00 0x032
+#define MX27_PAD_USBH2_DIR__USBH2_DIR 0x01 0x000
+#define MX27_PAD_USBH2_DIR__GPIO1_1 0x01 0x032
+#define MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x02 0x004
+#define MX27_PAD_USBH2_DATA7__GPIO1_2 0x02 0x032
+#define MX27_PAD_USBH2_NXT__USBH2_NXT 0x03 0x000
+#define MX27_PAD_USBH2_NXT__GPIO1_3 0x03 0x032
+#define MX27_PAD_USBH2_STP__USBH2_STP 0x04 0x004
+#define MX27_PAD_USBH2_STP__GPIO1_4 0x04 0x032
+#define MX27_PAD_LSCLK__LSCLK 0x05 0x004
+#define MX27_PAD_LSCLK__GPIO1_5 0x05 0x032
+#define MX27_PAD_LD0__LD0 0x06 0x004
+#define MX27_PAD_LD0__GPIO1_6 0x06 0x032
+#define MX27_PAD_LD1__LD1 0x07 0x004
+#define MX27_PAD_LD1__GPIO1_7 0x07 0x032
+#define MX27_PAD_LD2__LD2 0x08 0x004
+#define MX27_PAD_LD2__GPIO1_8 0x08 0x032
+#define MX27_PAD_LD3__LD3 0x09 0x004
+#define MX27_PAD_LD3__GPIO1_9 0x09 0x032
+#define MX27_PAD_LD4__LD4 0x0a 0x004
+#define MX27_PAD_LD4__GPIO1_10 0x0a 0x032
+#define MX27_PAD_LD5__LD5 0x0b 0x004
+#define MX27_PAD_LD5__GPIO1_11 0x0b 0x032
+#define MX27_PAD_LD6__LD6 0x0c 0x004
+#define MX27_PAD_LD6__GPIO1_12 0x0c 0x032
+#define MX27_PAD_LD7__LD7 0x0d 0x004
+#define MX27_PAD_LD7__GPIO1_13 0x0d 0x032
+#define MX27_PAD_LD8__LD8 0x0e 0x004
+#define MX27_PAD_LD8__GPIO1_14 0x0e 0x032
+#define MX27_PAD_LD9__LD9 0x0f 0x004
+#define MX27_PAD_LD9__GPIO1_15 0x0f 0x032
+#define MX27_PAD_LD10__LD10 0x10 0x004
+#define MX27_PAD_LD10__GPIO1_16 0x10 0x032
+#define MX27_PAD_LD11__LD11 0x11 0x004
+#define MX27_PAD_LD11__GPIO1_17 0x11 0x032
+#define MX27_PAD_LD12__LD12 0x12 0x004
+#define MX27_PAD_LD12__GPIO1_18 0x12 0x032
+#define MX27_PAD_LD13__LD13 0x13 0x004
+#define MX27_PAD_LD13__GPIO1_19 0x13 0x032
+#define MX27_PAD_LD14__LD14 0x14 0x004
+#define MX27_PAD_LD14__GPIO1_20 0x14 0x032
+#define MX27_PAD_LD15__LD15 0x15 0x004
+#define MX27_PAD_LD15__GPIO1_21 0x15 0x032
+#define MX27_PAD_LD16__LD16 0x16 0x004
+#define MX27_PAD_LD16__GPIO1_22 0x16 0x032
+#define MX27_PAD_LD17__LD17 0x17 0x004
+#define MX27_PAD_LD17__GPIO1_23 0x17 0x032
+#define MX27_PAD_REV__REV 0x18 0x004
+#define MX27_PAD_REV__GPIO1_24 0x18 0x032
+#define MX27_PAD_CLS__CLS 0x19 0x004
+#define MX27_PAD_CLS__GPIO1_25 0x19 0x032
+#define MX27_PAD_PS__PS 0x1a 0x004
+#define MX27_PAD_PS__GPIO1_26 0x1a 0x032
+#define MX27_PAD_SPL_SPR__SPL_SPR 0x1b 0x004
+#define MX27_PAD_SPL_SPR__GPIO1_27 0x1b 0x032
+#define MX27_PAD_HSYNC__HSYNC 0x1c 0x004
+#define MX27_PAD_HSYNC__GPIO1_28 0x1c 0x032
+#define MX27_PAD_VSYNC__VSYNC 0x1d 0x004
+#define MX27_PAD_VSYNC__GPIO1_29 0x1d 0x032
+#define MX27_PAD_CONTRAST__CONTRAST 0x1e 0x004
+#define MX27_PAD_CONTRAST__GPIO1_30 0x1e 0x032
+#define MX27_PAD_OE_ACD__OE_ACD 0x1f 0x004
+#define MX27_PAD_OE_ACD__GPIO1_31 0x1f 0x032
+#define MX27_PAD_UNUSED0__UNUSED0 0x20 0x004
+#define MX27_PAD_UNUSED0__GPIO2_0 0x20 0x032
+#define MX27_PAD_UNUSED1__UNUSED1 0x21 0x004
+#define MX27_PAD_UNUSED1__GPIO2_1 0x21 0x032
+#define MX27_PAD_UNUSED2__UNUSED2 0x22 0x004
+#define MX27_PAD_UNUSED2__GPIO2_2 0x22 0x032
+#define MX27_PAD_UNUSED3__UNUSED3 0x23 0x004
+#define MX27_PAD_UNUSED3__GPIO2_3 0x23 0x032
+#define MX27_PAD_SD2_D0__SD2_D0 0x24 0x004
+#define MX27_PAD_SD2_D0__MSHC_DATA0 0x24 0x005
+#define MX27_PAD_SD2_D0__GPIO2_4 0x24 0x032
+#define MX27_PAD_SD2_D1__SD2_D1 0x25 0x004
+#define MX27_PAD_SD2_D1__MSHC_DATA1 0x25 0x005
+#define MX27_PAD_SD2_D1__GPIO2_5 0x25 0x032
+#define MX27_PAD_SD2_D2__SD2_D2 0x26 0x004
+#define MX27_PAD_SD2_D2__MSHC_DATA2 0x26 0x005
+#define MX27_PAD_SD2_D2__GPIO2_6 0x26 0x032
+#define MX27_PAD_SD2_D3__SD2_D3 0x27 0x004
+#define MX27_PAD_SD2_D3__MSHC_DATA3 0x27 0x005
+#define MX27_PAD_SD2_D3__GPIO2_7 0x27 0x032
+#define MX27_PAD_SD2_CMD__SD2_CMD 0x28 0x004
+#define MX27_PAD_SD2_CMD__MSHC_BS 0x28 0x005
+#define MX27_PAD_SD2_CMD__GPIO2_8 0x28 0x032
+#define MX27_PAD_SD2_CLK__SD2_CLK 0x29 0x004
+#define MX27_PAD_SD2_CLK__MSHC_SCLK 0x29 0x005
+#define MX27_PAD_SD2_CLK__GPIO2_9 0x29 0x032
+#define MX27_PAD_CSI_D0__CSI_D0 0x2a 0x000
+#define MX27_PAD_CSI_D0__UART6_TXD 0x2a 0x005
+#define MX27_PAD_CSI_D0__GPIO2_10 0x2a 0x032
+#define MX27_PAD_CSI_D1__CSI_D1 0x2b 0x000
+#define MX27_PAD_CSI_D1__UART6_RXD 0x2b 0x001
+#define MX27_PAD_CSI_D1__GPIO2_11 0x2b 0x032
+#define MX27_PAD_CSI_D2__CSI_D2 0x2c 0x000
+#define MX27_PAD_CSI_D2__UART6_CTS 0x2c 0x005
+#define MX27_PAD_CSI_D2__GPIO2_12 0x2c 0x032
+#define MX27_PAD_CSI_D3__CSI_D3 0x2d 0x000
+#define MX27_PAD_CSI_D3__UART6_RTS 0x2d 0x001
+#define MX27_PAD_CSI_D3__GPIO2_13 0x2d 0x032
+#define MX27_PAD_CSI_D4__CSI_D4 0x2e 0x000
+#define MX27_PAD_CSI_D4__GPIO2_14 0x2e 0x032
+#define MX27_PAD_CSI_MCLK__CSI_MCLK 0x2f 0x004
+#define MX27_PAD_CSI_MCLK__GPIO2_15 0x2f 0x032
+#define MX27_PAD_CSI_PIXCLK__CSI_PIXCLK 0x30 0x000
+#define MX27_PAD_CSI_PIXCLK__GPIO2_16 0x30 0x032
+#define MX27_PAD_CSI_D5__CSI_D5 0x31 0x000
+#define MX27_PAD_CSI_D5__GPIO2_17 0x31 0x032
+#define MX27_PAD_CSI_D6__CSI_D6 0x32 0x000
+#define MX27_PAD_CSI_D6__UART5_TXD 0x32 0x005
+#define MX27_PAD_CSI_D6__GPIO2_18 0x32 0x032
+#define MX27_PAD_CSI_D7__CSI_D7 0x33 0x000
+#define MX27_PAD_CSI_D7__UART5_RXD 0x33 0x001
+#define MX27_PAD_CSI_D7__GPIO2_19 0x33 0x032
+#define MX27_PAD_CSI_VSYNC__CSI_VSYNC 0x34 0x000
+#define MX27_PAD_CSI_VSYNC__UART5_CTS 0x34 0x005
+#define MX27_PAD_CSI_VSYNC__GPIO2_20 0x34 0x032
+#define MX27_PAD_CSI_HSYNC__CSI_HSYNC 0x35 0x000
+#define MX27_PAD_CSI_HSYNC__UART5_RTS 0x35 0x001
+#define MX27_PAD_CSI_HSYNC__GPIO2_21 0x35 0x032
+#define MX27_PAD_USBH1_SUSP__USBH1_SUSP 0x36 0x004
+#define MX27_PAD_USBH1_SUSP__GPIO2_22 0x36 0x032
+#define MX27_PAD_USB_PWR__USB_PWR 0x37 0x004
+#define MX27_PAD_USB_PWR__GPIO2_23 0x37 0x032
+#define MX27_PAD_USB_OC_B__USB_OC_B 0x38 0x000
+#define MX27_PAD_USB_OC_B__GPIO2_24 0x38 0x032
+#define MX27_PAD_USBH1_RCV__USBH1_RCV 0x39 0x004
+#define MX27_PAD_USBH1_RCV__GPIO2_25 0x39 0x032
+#define MX27_PAD_USBH1_FS__USBH1_FS 0x3a 0x004
+#define MX27_PAD_USBH1_FS__UART4_RTS 0x3a 0x001
+#define MX27_PAD_USBH1_FS__GPIO2_26 0x3a 0x032
+#define MX27_PAD_USBH1_OE_B__USBH1_OE_B 0x3b 0x004
+#define MX27_PAD_USBH1_OE_B__GPIO2_27 0x3b 0x032
+#define MX27_PAD_USBH1_TXDM__USBH1_TXDM 0x3c 0x004
+#define MX27_PAD_USBH1_TXDM__UART4_TXD 0x3c 0x005
+#define MX27_PAD_USBH1_TXDM__GPIO2_28 0x3c 0x032
+#define MX27_PAD_USBH1_TXDP__USBH1_TXDP 0x3d 0x004
+#define MX27_PAD_USBH1_TXDP__UART4_CTS 0x3d 0x005
+#define MX27_PAD_USBH1_TXDP__GPIO2_29 0x3d 0x032
+#define MX27_PAD_USBH1_RXDM__USBH1_RXDM 0x3e 0x004
+#define MX27_PAD_USBH1_RXDM__GPIO2_30 0x3e 0x032
+#define MX27_PAD_USBH1_RXDP__USBH1_RXDP 0x3f 0x004
+#define MX27_PAD_USBH1_RXDP__UART4_RXD 0x3f 0x001
+#define MX27_PAD_USBH1_RXDP__GPIO2_31 0x3f 0x032
+#define MX27_PAD_UNUSED4__UNUSED4 0x40 0x004
+#define MX27_PAD_UNUSED4__GPIO3_0 0x40 0x032
+#define MX27_PAD_UNUSED5__UNUSED5 0x41 0x004
+#define MX27_PAD_UNUSED5__GPIO3_1 0x41 0x032
+#define MX27_PAD_UNUSED6__UNUSED6 0x42 0x004
+#define MX27_PAD_UNUSED6__GPIO3_2 0x42 0x032
+#define MX27_PAD_UNUSED7__UNUSED7 0x43 0x004
+#define MX27_PAD_UNUSED7__GPIO3_3 0x43 0x032
+#define MX27_PAD_UNUSED8__UNUSED8 0x44 0x004
+#define MX27_PAD_UNUSED8__GPIO3_4 0x44 0x032
+#define MX27_PAD_I2C2_SDA__I2C2_SDA 0x45 0x004
+#define MX27_PAD_I2C2_SDA__GPIO3_5 0x45 0x032
+#define MX27_PAD_I2C2_SCL__I2C2_SCL 0x46 0x004
+#define MX27_PAD_I2C2_SCL__GPIO3_6 0x46 0x032
+#define MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x47 0x004
+#define MX27_PAD_USBOTG_DATA5__GPIO3_7 0x47 0x032
+#define MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x48 0x004
+#define MX27_PAD_USBOTG_DATA6__GPIO3_8 0x48 0x032
+#define MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x49 0x004
+#define MX27_PAD_USBOTG_DATA0__GPIO3_9 0x49 0x032
+#define MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x4a 0x004
+#define MX27_PAD_USBOTG_DATA2__GPIO3_10 0x4a 0x032
+#define MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x4b 0x004
+#define MX27_PAD_USBOTG_DATA1__GPIO3_11 0x4b 0x032
+#define MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x4c 0x004
+#define MX27_PAD_USBOTG_DATA4__GPIO3_12 0x4c 0x032
+#define MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x4d 0x004
+#define MX27_PAD_USBOTG_DATA3__GPIO3_13 0x4d 0x032
+#define MX27_PAD_TOUT__TOUT 0x4e 0x004
+#define MX27_PAD_TOUT__GPIO3_14 0x4e 0x032
+#define MX27_PAD_TIN__TIN 0x4f 0x000
+#define MX27_PAD_TIN__GPIO3_15 0x4f 0x032
+#define MX27_PAD_SSI4_FS__SSI4_FS 0x50 0x004
+#define MX27_PAD_SSI4_FS__GPIO3_16 0x50 0x032
+#define MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x51 0x004
+#define MX27_PAD_SSI4_RXDAT__GPIO3_17 0x51 0x032
+#define MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x52 0x004
+#define MX27_PAD_SSI4_TXDAT__GPIO3_18 0x52 0x032
+#define MX27_PAD_SSI4_CLK__SSI4_CLK 0x53 0x004
+#define MX27_PAD_SSI4_CLK__GPIO3_19 0x53 0x032
+#define MX27_PAD_SSI1_FS__SSI1_FS 0x54 0x004
+#define MX27_PAD_SSI1_FS__GPIO3_20 0x54 0x032
+#define MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x55 0x004
+#define MX27_PAD_SSI1_RXDAT__GPIO3_21 0x55 0x032
+#define MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x56 0x004
+#define MX27_PAD_SSI1_TXDAT__GPIO3_22 0x56 0x032
+#define MX27_PAD_SSI1_CLK__SSI1_CLK 0x57 0x004
+#define MX27_PAD_SSI1_CLK__GPIO3_23 0x57 0x032
+#define MX27_PAD_SSI2_FS__SSI2_FS 0x58 0x004
+#define MX27_PAD_SSI2_FS__GPT5_TOUT 0x58 0x005
+#define MX27_PAD_SSI2_FS__GPIO3_24 0x58 0x032
+#define MX27_PAD_SSI2_RXDAT__SSI2_RXDAT 0x59 0x004
+#define MX27_PAD_SSI2_RXDAT__GPTS_TIN 0x59 0x001
+#define MX27_PAD_SSI2_RXDAT__GPIO3_25 0x59 0x032
+#define MX27_PAD_SSI2_TXDAT__SSI2_TXDAT 0x5a 0x004
+#define MX27_PAD_SSI2_TXDAT__GPT4_TOUT 0x5a 0x005
+#define MX27_PAD_SSI2_TXDAT__GPIO3_26 0x5a 0x032
+#define MX27_PAD_SSI2_CLK__SSI2_CLK 0x5b 0x004
+#define MX27_PAD_SSI2_CLK__GPT4_TIN 0x5b 0x001
+#define MX27_PAD_SSI2_CLK__GPIO3_27 0x5b 0x032
+#define MX27_PAD_SSI3_FS__SSI3_FS 0x5c 0x004
+#define MX27_PAD_SSI3_FS__SLCDC2_D0 0x5c 0x001
+#define MX27_PAD_SSI3_FS__GPIO3_28 0x5c 0x032
+#define MX27_PAD_SSI3_RXDAT__SSI3_RXDAT 0x5d 0x004
+#define MX27_PAD_SSI3_RXDAT__SLCDC2_RS 0x5d 0x001
+#define MX27_PAD_SSI3_RXDAT__GPIO3_29 0x5d 0x032
+#define MX27_PAD_SSI3_TXDAT__SSI3_TXDAT 0x5e 0x004
+#define MX27_PAD_SSI3_TXDAT__SLCDC2_CS 0x5e 0x001
+#define MX27_PAD_SSI3_TXDAT__GPIO3_30 0x5e 0x032
+#define MX27_PAD_SSI3_CLK__SSI3_CLK 0x5f 0x004
+#define MX27_PAD_SSI3_CLK__SLCDC2_CLK 0x5f 0x001
+#define MX27_PAD_SSI3_CLK__GPIO3_31 0x5f 0x032
+#define MX27_PAD_SD3_CMD__SD3_CMD 0x60 0x004
+#define MX27_PAD_SD3_CMD__FEC_TXD0 0x60 0x006
+#define MX27_PAD_SD3_CMD__GPIO4_0 0x60 0x032
+#define MX27_PAD_SD3_CLK__SD3_CLK 0x61 0x004
+#define MX27_PAD_SD3_CLK__ETMTRACEPKT15 0x61 0x005
+#define MX27_PAD_SD3_CLK__FEC_TXD1 0x61 0x006
+#define MX27_PAD_SD3_CLK__GPIO4_1 0x61 0x032
+#define MX27_PAD_ATA_DATA0__ATA_DATA0 0x62 0x004
+#define MX27_PAD_ATA_DATA0__SD3_D0 0x62 0x005
+#define MX27_PAD_ATA_DATA0__FEC_TXD2 0x62 0x006
+#define MX27_PAD_ATA_DATA0__GPIO4_2 0x62 0x032
+#define MX27_PAD_ATA_DATA1__ATA_DATA1 0x63 0x004
+#define MX27_PAD_ATA_DATA1__SD3_D1 0x63 0x005
+#define MX27_PAD_ATA_DATA1__FEC_TXD3 0x63 0x006
+#define MX27_PAD_ATA_DATA1__GPIO4_3 0x63 0x032
+#define MX27_PAD_ATA_DATA2__ATA_DATA2 0x64 0x004
+#define MX27_PAD_ATA_DATA2__SD3_D2 0x64 0x005
+#define MX27_PAD_ATA_DATA2__FEC_RX_ER 0x64 0x002
+#define MX27_PAD_ATA_DATA2__GPIO4_4 0x64 0x032
+#define MX27_PAD_ATA_DATA3__ATA_DATA3 0x65 0x004
+#define MX27_PAD_ATA_DATA3__SD3_D3 0x65 0x005
+#define MX27_PAD_ATA_DATA3__FEC_RXD1 0x65 0x002
+#define MX27_PAD_ATA_DATA3__GPIO4_5 0x65 0x032
+#define MX27_PAD_ATA_DATA4__ATA_DATA4 0x66 0x004
+#define MX27_PAD_ATA_DATA4__ETMTRACEPKT14 0x66 0x005
+#define MX27_PAD_ATA_DATA4__FEC_RXD2 0x66 0x002
+#define MX27_PAD_ATA_DATA4__GPIO4_6 0x66 0x032
+#define MX27_PAD_ATA_DATA5__ATA_DATA5 0x67 0x004
+#define MX27_PAD_ATA_DATA5__ETMTRACEPKT13 0x67 0x005
+#define MX27_PAD_ATA_DATA5__FEC_RXD3 0x67 0x002
+#define MX27_PAD_ATA_DATA5__GPIO4_7 0x67 0x032
+#define MX27_PAD_ATA_DATA6__ATA_DATA6 0x68 0x004
+#define MX27_PAD_ATA_DATA6__FEC_MDIO 0x68 0x005
+#define MX27_PAD_ATA_DATA6__GPIO4_8 0x68 0x032
+#define MX27_PAD_ATA_DATA7__ATA_DATA7 0x69 0x004
+#define MX27_PAD_ATA_DATA7__ETMTRACEPKT12 0x69 0x005
+#define MX27_PAD_ATA_DATA7__FEC_MDC 0x69 0x006
+#define MX27_PAD_ATA_DATA7__GPIO4_9 0x69 0x032
+#define MX27_PAD_ATA_DATA8__ATA_DATA8 0x6a 0x004
+#define MX27_PAD_ATA_DATA8__ETMTRACEPKT11 0x6a 0x005
+#define MX27_PAD_ATA_DATA8__FEC_CRS 0x6a 0x002
+#define MX27_PAD_ATA_DATA8__GPIO4_10 0x6a 0x032
+#define MX27_PAD_ATA_DATA9__ATA_DATA9 0x6b 0x004
+#define MX27_PAD_ATA_DATA9__ETMTRACEPKT10 0x6b 0x005
+#define MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x6b 0x002
+#define MX27_PAD_ATA_DATA9__GPIO4_11 0x6b 0x032
+#define MX27_PAD_ATA_DATA10__ATA_DATA10 0x6c 0x004
+#define MX27_PAD_ATA_DATA10__ETMTRACEPKT9 0x6c 0x005
+#define MX27_PAD_ATA_DATA10__FEC_RXD0 0x6c 0x002
+#define MX27_PAD_ATA_DATA10__GPIO4_12 0x6c 0x032
+#define MX27_PAD_ATA_DATA11__ATA_DATA11 0x6d 0x004
+#define MX27_PAD_ATA_DATA11__ETMTRACEPKT8 0x6d 0x005
+#define MX27_PAD_ATA_DATA11__FEC_RX_DV 0x6d 0x002
+#define MX27_PAD_ATA_DATA11__GPIO4_13 0x6d 0x032
+#define MX27_PAD_ATA_DATA12__ATA_DATA12 0x6e 0x004
+#define MX27_PAD_ATA_DATA12__ETMTRACEPKT7 0x6e 0x005
+#define MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x6e 0x002
+#define MX27_PAD_ATA_DATA12__GPIO4_14 0x6e 0x032
+#define MX27_PAD_ATA_DATA13__ATA_DATA13 0x6f 0x004
+#define MX27_PAD_ATA_DATA13__ETMTRACEPKT6 0x6f 0x005
+#define MX27_PAD_ATA_DATA13__FEC_COL 0x6f 0x002
+#define MX27_PAD_ATA_DATA13__GPIO4_15 0x6f 0x032
+#define MX27_PAD_ATA_DATA14__ATA_DATA14 0x70 0x004
+#define MX27_PAD_ATA_DATA14__ETMTRACEPKT5 0x70 0x005
+#define MX27_PAD_ATA_DATA14__FEC_TX_ER 0x70 0x006
+#define MX27_PAD_ATA_DATA14__GPIO4_16 0x70 0x032
+#define MX27_PAD_I2C_DATA__I2C_DATA 0x71 0x004
+#define MX27_PAD_I2C_DATA__GPIO4_17 0x71 0x032
+#define MX27_PAD_I2C_CLK__I2C_CLK 0x72 0x004
+#define MX27_PAD_I2C_CLK__GPIO4_18 0x72 0x032
+#define MX27_PAD_CSPI2_SS2__CSPI2_SS2 0x73 0x004
+#define MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x73 0x005
+#define MX27_PAD_CSPI2_SS2__GPIO4_19 0x73 0x032
+#define MX27_PAD_CSPI2_SS1__CSPI2_SS1 0x74 0x004
+#define MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x74 0x005
+#define MX27_PAD_CSPI2_SS1__GPIO4_20 0x74 0x032
+#define MX27_PAD_CSPI2_SS0__CSPI2_SS0 0x75 0x004
+#define MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x75 0x005
+#define MX27_PAD_CSPI2_SS0__GPIO4_21 0x75 0x032
+#define MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x76 0x004
+#define MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x76 0x005
+#define MX27_PAD_CSPI2_SCLK__GPIO4_22 0x76 0x032
+#define MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x77 0x004
+#define MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x77 0x005
+#define MX27_PAD_CSPI2_MISO__GPIO4_23 0x77 0x032
+#define MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x78 0x004
+#define MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x78 0x005
+#define MX27_PAD_CSPI2_MOSI__GPIO4_24 0x78 0x032
+#define MX27_PAD_CSPI1_RDY__CSPI1_RDY 0x79 0x000
+#define MX27_PAD_CSPI1_RDY__GPIO4_25 0x79 0x032
+#define MX27_PAD_CSPI1_SS2__CSPI1_SS2 0x7a 0x004
+#define MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x7a 0x005
+#define MX27_PAD_CSPI1_SS2__GPIO4_26 0x7a 0x032
+#define MX27_PAD_CSPI1_SS1__CSPI1_SS1 0x7b 0x004
+#define MX27_PAD_CSPI1_SS1__GPIO4_27 0x7b 0x032
+#define MX27_PAD_CSPI1_SS0__CSPI1_SS0 0x7c 0x004
+#define MX27_PAD_CSPI1_SS0__GPIO4_28 0x7c 0x032
+#define MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x7d 0x004
+#define MX27_PAD_CSPI1_SCLK__GPIO4_29 0x7d 0x032
+#define MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x7e 0x004
+#define MX27_PAD_CSPI1_MISO__GPIO4_30 0x7e 0x032
+#define MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x7f 0x004
+#define MX27_PAD_CSPI1_MOSI__GPIO4_31 0x7f 0x032
+#define MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x80 0x000
+#define MX27_PAD_USBOTG_NXT__KP_COL6A 0x80 0x005
+#define MX27_PAD_USBOTG_NXT__GPIO5_0 0x80 0x032
+#define MX27_PAD_USBOTG_STP__USBOTG_STP 0x81 0x004
+#define MX27_PAD_USBOTG_STP__KP_ROW6A 0x81 0x005
+#define MX27_PAD_USBOTG_STP__GPIO5_1 0x81 0x032
+#define MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x82 0x000
+#define MX27_PAD_USBOTG_DIR__KP_ROW7A 0x82 0x005
+#define MX27_PAD_USBOTG_DIR__GPIO5_2 0x82 0x032
+#define MX27_PAD_UART2_CTS__UART2_CTS 0x83 0x004
+#define MX27_PAD_UART2_CTS__KP_COL7 0x83 0x005
+#define MX27_PAD_UART2_CTS__GPIO5_3 0x83 0x032
+#define MX27_PAD_UART2_RTS__UART2_RTS 0x84 0x000
+#define MX27_PAD_UART2_RTS__KP_ROW7 0x84 0x005
+#define MX27_PAD_UART2_RTS__GPIO5_4 0x84 0x032
+#define MX27_PAD_PWMO__PWMO 0x85 0x004
+#define MX27_PAD_PWMO__GPIO5_5 0x85 0x032
+#define MX27_PAD_UART2_TXD__UART2_TXD 0x86 0x004
+#define MX27_PAD_UART2_TXD__KP_COL6 0x86 0x005
+#define MX27_PAD_UART2_TXD__GPIO5_6 0x86 0x032
+#define MX27_PAD_UART2_RXD__UART2_RXD 0x87 0x000
+#define MX27_PAD_UART2_RXD__KP_ROW6 0x87 0x005
+#define MX27_PAD_UART2_RXD__GPIO5_7 0x87 0x032
+#define MX27_PAD_UART3_TXD__UART3_TXD 0x88 0x004
+#define MX27_PAD_UART3_TXD__GPIO5_8 0x88 0x032
+#define MX27_PAD_UART3_RXD__UART3_RXD 0x89 0x000
+#define MX27_PAD_UART3_RXD__GPIO5_9 0x89 0x032
+#define MX27_PAD_UART3_CTS__UART3_CTS 0x8a 0x004
+#define MX27_PAD_UART3_CTS__GPIO5_10 0x8a 0x032
+#define MX27_PAD_UART3_RTS__UART3_RTS 0x8b 0x000
+#define MX27_PAD_UART3_RTS__GPIO5_11 0x8b 0x032
+#define MX27_PAD_UART1_TXD__UART1_TXD 0x8c 0x004
+#define MX27_PAD_UART1_TXD__GPIO5_12 0x8c 0x032
+#define MX27_PAD_UART1_RXD__UART1_RXD 0x8d 0x000
+#define MX27_PAD_UART1_RXD__GPIO5_13 0x8d 0x032
+#define MX27_PAD_UART1_CTS__UART1_CTS 0x8e 0x004
+#define MX27_PAD_UART1_CTS__GPIO5_14 0x8e 0x032
+#define MX27_PAD_UART1_RTS__UART1_RTS 0x8f 0x000
+#define MX27_PAD_UART1_RTS__GPIO5_15 0x8f 0x032
+#define MX27_PAD_RTCK__RTCK 0x90 0x004
+#define MX27_PAD_RTCK__OWIRE 0x90 0x005
+#define MX27_PAD_RTCK__GPIO5_16 0x90 0x032
+#define MX27_PAD_RESET_OUT_B__RESET_OUT_B 0x91 0x004
+#define MX27_PAD_RESET_OUT_B__GPIO5_17 0x91 0x032
+#define MX27_PAD_SD1_D0__SD1_D0 0x92 0x004
+#define MX27_PAD_SD1_D0__CSPI3_MISO 0x92 0x001
+#define MX27_PAD_SD1_D0__GPIO5_18 0x92 0x032
+#define MX27_PAD_SD1_D1__SD1_D1 0x93 0x004
+#define MX27_PAD_SD1_D1__GPIO5_19 0x93 0x032
+#define MX27_PAD_SD1_D2__SD1_D2 0x94 0x004
+#define MX27_PAD_SD1_D2__GPIO5_20 0x94 0x032
+#define MX27_PAD_SD1_D3__SD1_D3 0x95 0x004
+#define MX27_PAD_SD1_D3__CSPI3_SS 0x95 0x005
+#define MX27_PAD_SD1_D3__GPIO5_21 0x95 0x032
+#define MX27_PAD_SD1_CMD__SD1_CMD 0x96 0x004
+#define MX27_PAD_SD1_CMD__CSPI3_MOSI 0x96 0x005
+#define MX27_PAD_SD1_CMD__GPIO5_22 0x96 0x032
+#define MX27_PAD_SD1_CLK__SD1_CLK 0x97 0x004
+#define MX27_PAD_SD1_CLK__CSPI3_SCLK 0x97 0x005
+#define MX27_PAD_SD1_CLK__GPIO5_23 0x97 0x032
+#define MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x98 0x000
+#define MX27_PAD_USBOTG_CLK__GPIO5_24 0x98 0x032
+#define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x99 0x004
+#define MX27_PAD_USBOTG_DATA7__GPIO5_25 0x99 0x032
+#define MX27_PAD_UNUSED9__UNUSED9 0x9a 0x004
+#define MX27_PAD_UNUSED9__GPIO5_26 0x9a 0x032
+#define MX27_PAD_UNUSED10__UNUSED10 0x9b 0x004
+#define MX27_PAD_UNUSED10__GPIO5_27 0x9b 0x032
+#define MX27_PAD_UNUSED11__UNUSED11 0x9c 0x004
+#define MX27_PAD_UNUSED11__GPIO5_28 0x9c 0x032
+#define MX27_PAD_UNUSED12__UNUSED12 0x9d 0x004
+#define MX27_PAD_UNUSED12__GPIO5_29 0x9d 0x032
+#define MX27_PAD_UNUSED13__UNUSED13 0x9e 0x004
+#define MX27_PAD_UNUSED13__GPIO5_30 0x9e 0x032
+#define MX27_PAD_UNUSED14__UNUSED14 0x9f 0x004
+#define MX27_PAD_UNUSED14__GPIO5_31 0x9f 0x032
+#define MX27_PAD_NFRB__NFRB 0xa0 0x000
+#define MX27_PAD_NFRB__ETMTRACEPKT3 0xa0 0x005
+#define MX27_PAD_NFRB__GPIO6_0 0xa0 0x032
+#define MX27_PAD_NFCLE__NFCLE 0xa1 0x004
+#define MX27_PAD_NFCLE__ETMTRACEPKT0 0xa1 0x005
+#define MX27_PAD_NFCLE__GPIO6_1 0xa1 0x032
+#define MX27_PAD_NFWP_B__NFWP_B 0xa2 0x004
+#define MX27_PAD_NFWP_B__ETMTRACEPKT1 0xa2 0x005
+#define MX27_PAD_NFWP_B__GPIO6_2 0xa2 0x032
+#define MX27_PAD_NFCE_B__NFCE_B 0xa3 0x004
+#define MX27_PAD_NFCE_B__ETMTRACEPKT2 0xa3 0x005
+#define MX27_PAD_NFCE_B__GPIO6_3 0xa3 0x032
+#define MX27_PAD_NFALE__NFALE 0xa4 0x004
+#define MX27_PAD_NFALE__ETMPIPESTAT0 0xa4 0x005
+#define MX27_PAD_NFALE__GPIO6_4 0xa4 0x032
+#define MX27_PAD_NFRE_B__NFRE_B 0xa5 0x004
+#define MX27_PAD_NFRE_B__ETMPIPESTAT1 0xa5 0x005
+#define MX27_PAD_NFRE_B__GPIO6_5 0xa5 0x032
+#define MX27_PAD_NFWE_B__NFWE_B 0xa6 0x004
+#define MX27_PAD_NFWE_B__ETMPIPESTAT2 0xa6 0x005
+#define MX27_PAD_NFWE_B__GPIO6_6 0xa6 0x032
+#define MX27_PAD_PC_POE__PC_POE 0xa7 0x004
+#define MX27_PAD_PC_POE__ATA_BUFFER_EN 0xa7 0x005
+#define MX27_PAD_PC_POE__GPIO6_7 0xa7 0x032
+#define MX27_PAD_PC_RW_B__PC_RW_B 0xa8 0x004
+#define MX27_PAD_PC_RW_B__ATA_IORDY 0xa8 0x001
+#define MX27_PAD_PC_RW_B__GPIO6_8 0xa8 0x032
+#define MX27_PAD_IOIS16__IOIS16 0xa9 0x000
+#define MX27_PAD_IOIS16__ATA_INTRQ 0xa9 0x001
+#define MX27_PAD_IOIS16__GPIO6_9 0xa9 0x032
+#define MX27_PAD_PC_RST__PC_RST 0xaa 0x004
+#define MX27_PAD_PC_RST__ATA_RESET_B 0xaa 0x005
+#define MX27_PAD_PC_RST__GPIO6_10 0xaa 0x032
+#define MX27_PAD_PC_BVD2__PC_BVD2 0xab 0x000
+#define MX27_PAD_PC_BVD2__ATA_DMACK 0xab 0x005
+#define MX27_PAD_PC_BVD2__GPIO6_11 0xab 0x032
+#define MX27_PAD_PC_BVD1__PC_BVD1 0xac 0x000
+#define MX27_PAD_PC_BVD1__ATA_DMARQ 0xac 0x001
+#define MX27_PAD_PC_BVD1__GPIO6_12 0xac 0x032
+#define MX27_PAD_PC_VS2__PC_VS2 0xad 0x000
+#define MX27_PAD_PC_VS2__ATA_DA0 0xad 0x005
+#define MX27_PAD_PC_VS2__GPIO6_13 0xad 0x032
+#define MX27_PAD_PC_VS1__PC_VS1 0xae 0x000
+#define MX27_PAD_PC_VS1__ATA_DA1 0xae 0x005
+#define MX27_PAD_PC_VS1__GPIO6_14 0xae 0x032
+#define MX27_PAD_CLKO__CLKO 0xaf 0x004
+#define MX27_PAD_CLKO__GPIO6_15 0xaf 0x032
+#define MX27_PAD_PC_PWRON__PC_PWRON 0xb0 0x000
+#define MX27_PAD_PC_PWRON__ATA_DA2 0xb0 0x005
+#define MX27_PAD_PC_PWRON__GPIO6_16 0xb0 0x032
+#define MX27_PAD_PC_READY__PC_READY 0xb1 0x000
+#define MX27_PAD_PC_READY__ATA_CS0 0xb1 0x005
+#define MX27_PAD_PC_READY__GPIO6_17 0xb1 0x032
+#define MX27_PAD_PC_WAIT_B__PC_WAIT_B 0xb2 0x000
+#define MX27_PAD_PC_WAIT_B__ATA_CS1 0xb2 0x005
+#define MX27_PAD_PC_WAIT_B__GPIO6_18 0xb2 0x032
+#define MX27_PAD_PC_CD2_B__PC_CD2_B 0xb3 0x000
+#define MX27_PAD_PC_CD2_B__ATA_DIOW 0xb3 0x005
+#define MX27_PAD_PC_CD2_B__GPIO6_19 0xb3 0x032
+#define MX27_PAD_PC_CD1_B__PC_CD1_B 0xb4 0x000
+#define MX27_PAD_PC_CD1_B__ATA_DIOR 0xb4 0x005
+#define MX27_PAD_PC_CD1_B__GPIO6_20 0xb4 0x032
+#define MX27_PAD_CS4_B__CS4_B 0xb5 0x004
+#define MX27_PAD_CS4_B__ETMTRACESYNC 0xb5 0x005
+#define MX27_PAD_CS4_B__GPIO6_21 0xb5 0x032
+#define MX27_PAD_CS5_B__CS5_B 0xb6 0x004
+#define MX27_PAD_CS5_B__ETMTRACECLK 0xb6 0x005
+#define MX27_PAD_CS5_B__GPIO6_22 0xb6 0x032
+#define MX27_PAD_ATA_DATA15__ATA_DATA15 0xb7 0x004
+#define MX27_PAD_ATA_DATA15__ETMTRACEPKT4 0xb7 0x005
+#define MX27_PAD_ATA_DATA15__FEC_TX_EN 0xb7 0x006
+#define MX27_PAD_ATA_DATA15__GPIO6_23 0xb7 0x032
+#define MX27_PAD_UNUSED15__UNUSED15 0xb8 0x004
+#define MX27_PAD_UNUSED15__GPIO6_24 0xb8 0x032
+#define MX27_PAD_UNUSED16__UNUSED16 0xb9 0x004
+#define MX27_PAD_UNUSED16__GPIO6_25 0xb9 0x032
+#define MX27_PAD_UNUSED17__UNUSED17 0xba 0x004
+#define MX27_PAD_UNUSED17__GPIO6_26 0xba 0x032
+#define MX27_PAD_UNUSED18__UNUSED18 0xbb 0x004
+#define MX27_PAD_UNUSED18__GPIO6_27 0xbb 0x032
+#define MX27_PAD_UNUSED19__UNUSED19 0xbc 0x004
+#define MX27_PAD_UNUSED19__GPIO6_28 0xbc 0x032
+#define MX27_PAD_UNUSED20__UNUSED20 0xbd 0x004
+#define MX27_PAD_UNUSED20__GPIO6_29 0xbd 0x032
+#define MX27_PAD_UNUSED21__UNUSED21 0xbe 0x004
+#define MX27_PAD_UNUSED21__GPIO6_30 0xbe 0x032
+#define MX27_PAD_UNUSED22__UNUSED22 0xbf 0x004
+#define MX27_PAD_UNUSED22__GPIO6_31 0xbf 0x032
+
+#endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 826231e..2763cae 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -10,6 +10,9 @@
*/
#include "skeleton.dtsi"
+#include "imx27-pinfunc.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
@@ -204,6 +207,30 @@
status = "disabled";
};
+ ssi1: ssi@10010000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+ reg = <0x10010000 0x1000>;
+ interrupts = <14>;
+ clocks = <&clks 26>;
+ dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
+ dma-names = "rx0", "tx0", "rx1", "tx1";
+ fsl,fifo-depth = <8>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@10011000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+ reg = <0x10011000 0x1000>;
+ interrupts = <13>;
+ clocks = <&clks 25>;
+ dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
+ dma-names = "rx0", "tx0", "rx1", "tx1";
+ fsl,fifo-depth = <8>;
+ status = "disabled";
+ };
+
i2c1: i2c@10012000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -236,64 +263,72 @@
status = "disabled";
};
- gpio1: gpio@10015000 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015000 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ iomuxc: iomuxc@10015000 {
+ compatible = "fsl,imx27-iomuxc";
+ reg = <0x10015000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- gpio2: gpio@10015100 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015100 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio1: gpio@10015000 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015000 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- gpio3: gpio@10015200 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015200 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio2: gpio@10015100 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015100 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- gpio4: gpio@10015300 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015300 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio3: gpio@10015200 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015200 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- gpio5: gpio@10015400 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015400 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
+ gpio4: gpio@10015300 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015300 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- gpio6: gpio@10015500 {
- compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
- reg = <0x10015500 0x100>;
- interrupts = <8>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ gpio5: gpio@10015400 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015400 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@10015500 {
+ compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+ reg = <0x10015500 0x100>;
+ interrupts = <8>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
audmux: audmux@10016000 {
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index e2efd8d..221cac4 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -48,6 +48,7 @@
MX28_PAD_LCD_D20__GPIO_1_20
MX28_PAD_LCD_D21__GPIO_1_21
MX28_PAD_LCD_D22__GPIO_1_22
+ MX28_PAD_GPMI_CE1N__GPIO_0_17
>;
fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <MXS_VOLTAGE_HIGH>;
@@ -66,6 +67,16 @@
fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+
+ usb0_otg_apf28dev: otg-apf28dev@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D23__GPIO_1_23
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
};
lcdif@80030000 {
@@ -131,6 +142,8 @@
ahb@80080000 {
usb0: usb@80080000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_otg_apf28dev>;
vbus-supply = <®_usb0_vbus>;
status = "okay";
};
@@ -150,13 +163,17 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 23 1>;
+ enable-active-high;
};
};
@@ -177,4 +194,14 @@
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ user-button {
+ label = "User button";
+ gpios = <&gpio0 17 0>;
+ linux,code = <0x100>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 6f254ca..e1ce917 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -193,9 +193,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index cabb617..ae7c339 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -100,6 +100,8 @@
usb0: usb@80080000 {
pinctrl-names = "default";
pinctrl-0 = <&usb0_otg_cfa10036>;
+ dr_mode = "peripheral";
+ phy_type = "utmi";
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index f93e9a7..e5beaa5 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -54,7 +54,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
@@ -72,9 +72,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10037>;
regulator-name = "usb1_vbus";
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 7087b4b..7d51459 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -229,15 +229,39 @@
i2c-parent = <&i2c1>;
i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0>;
+
+ adc0: nau7802@2a {
+ compatible = "nuvoton,nau7802";
+ reg = <0x2a>;
+ nuvoton,vldo = <3000>;
+ };
};
i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
+
+ adc1: nau7802@2a {
+ compatible = "nuvoton,nau7802";
+ reg = <0x2a>;
+ nuvoton,vldo = <3000>;
+ };
};
i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <2>;
+
+ adc2: nau7802@2a {
+ compatible = "nuvoton,nau7802";
+ reg = <0x2a>;
+ nuvoton,vldo = <3000>;
+ };
};
i2c@3 {
@@ -274,7 +298,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
@@ -282,9 +306,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10049>;
regulator-name = "usb1_vbus";
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 3c13128..c4e00ce 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -134,7 +134,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
@@ -142,9 +142,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10057>;
regulator-name = "usb1_vbus";
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index 2469d34..7c9cc78 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -101,7 +101,7 @@
ahb@80080000 {
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
pinctrl-names = "default";
status = "okay";
};
@@ -109,11 +109,14 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@0 {
pinctrl-names = "default";
pinctrl-0 = <&usb_pins_cfa10058>;
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
new file mode 100644
index 0000000..5f326c1
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+ model = "I2SE Duckbill";
+ compatible = "i2se,duckbill", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_8bit_pins_a
+ &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <8>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_ENET0_RX_CLK__GPIO_4_13 /* PHY Reset */
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ led_pins_a: led_gpio@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART1_RX__GPIO_3_4
+ MX28_PAD_AUART1_TX__GPIO_3_5
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ duart: serial@80074000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ status = "okay";
+ };
+
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-supply = <®_3p3v>;
+ phy-reset-gpios = <&gpio4 13 0>;
+ phy-reset-duration = <100>;
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a>;
+
+ status {
+ label = "duckbill:green:status";
+ gpios = <&gpio3 5 0>;
+ };
+
+ failure {
+ label = "duckbill:red:status";
+ gpios = <&gpio3 4 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
new file mode 100644
index 0000000..7c1572c
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
+ */
+
+/dts-v1/;
+#include "imx28-eukrea-mbmx28lc.dtsi"
+
+/ {
+ model = "Eukrea Electromatique MBMX283LC";
+ compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x04000000>;
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmi_pins_a>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+
+&mac0 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pinctrl{
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_cpuimx283>;
+
+ hog_pins_cpuimx283: hog-cpuimx283@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+ MX28_PAD_ENET0_TX_CLK__GPIO_4_5
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
new file mode 100644
index 0000000..e773144
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
+ */
+
+#include "imx28-eukrea-mbmx283lc.dts"
+
+/ {
+ model = "Eukrea Electromatique MBMX287LC";
+ compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+ memory {
+ reg = <0x40000000 0x08000000>;
+ };
+};
+
+&mac1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac1_pins_a>;
+ phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
+ hog_pins_cpuimx287: hog-cpuimx287@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SPDIF__GPIO_3_27
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
new file mode 100644
index 0000000..927b391
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -0,0 +1,326 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+ model = "Eukrea Electromatique MBMX28LC";
+ compatible = "eukrea,mbmx28lc", "fsl,imx28";
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 4 1000000>;
+ brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
+ default-brightness-level = <10>;
+ };
+
+ button-sw3 {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
+
+ sw3 {
+ label = "SW3";
+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ gpio-key,wakeup;
+ };
+ };
+
+ button-sw4 {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
+
+ sw4 {
+ label = "SW4";
+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ gpio-key,wakeup;
+ };
+ };
+
+ led-d6 {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_d6_pins_mbmx28lc>;
+
+ led1 {
+ label = "d6";
+ gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ led-d7 {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_d7_pins_mbmx28lc>;
+
+ led1 {
+ label = "d7";
+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_lcd_3v3: regulator@1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <®_lcd_3v3_pins_mbmx28lc>;
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb0_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <®_usb0_vbus_pins_mbmx28lc>;
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb1_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <®_usb1_vbus_pins_mbmx28lc>;
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx28-mbmx28lc-sgtl5000",
+ "fsl,mxs-audio-sgtl5000";
+ model = "imx28-mbmx28lc-sgtl5000";
+ saif-controllers = <&saif0 &saif1>;
+ audio-codec = <&sgtl5000>;
+ };
+};
+
+&duart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_4pins_a>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ clocks = <&saif0>;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
+ lcd-supply = <®_lcd_3v3>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ model = "43WVF1G-0";
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <9072000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <10>;
+ hfront-porch = <5>;
+ vback-porch = <8>;
+ vfront-porch = <8>;
+ hsync-len = <40>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
+
+&lradc {
+ fsl,lradc-touchscreen-wires = <4>;
+ status = "okay";
+};
+
+&pinctrl {
+ gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D21__GPIO_1_21
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D20__GPIO_1_20
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_VSYNC__LCD_VSYNC
+ MX28_PAD_LCD_HSYNC__LCD_HSYNC
+ MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+ MX28_PAD_LCD_ENABLE__LCD_ENABLE
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D23__GPIO_1_23
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D22__GPIO_1_22
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_RESET__GPIO_3_30
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D18__GPIO_1_18
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D19__GPIO_1_19
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4_pins_a>;
+ status = "okay";
+};
+
+&saif0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif0_pins_a>;
+ status = "okay";
+};
+
+&saif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&saif1_pins_a>;
+ fsl,saif-master = <&saif0>;
+ status = "okay";
+};
+
+&ssp0 {
+ compatible = "fsl,imx28-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
+ bus-width = <4>;
+ cd-inverted;
+ status = "okay";
+};
+
+&usb0 {
+ disable-over-current;
+ vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_pins_b>;
+};
+
+&usb1 {
+ vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 4267c2b..e4cc44c 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -193,6 +193,7 @@
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
+ clock-frequency = <400000>;
status = "okay";
sgtl5000: codec@0a {
@@ -278,33 +279,39 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- reg_vddio_sd0: vddio-sd0 {
+ reg_vddio_sd0: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
- reg_fec_3v3: fec-3v3 {
+ reg_fec_3v3: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 15 0>;
};
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@3 {
compatible = "regulator-fixed";
+ reg = <3>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -312,8 +319,9 @@
enable-active-high;
};
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@4 {
compatible = "regulator-fixed";
+ reg = <4>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -321,8 +329,9 @@
enable-active-high;
};
- reg_lcd_3v3: lcd-3v3 {
+ reg_lcd_3v3: regulator@5 {
compatible = "regulator-fixed";
+ reg = <5>;
regulator-name = "lcd-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -330,8 +339,9 @@
enable-active-high;
};
- reg_can_3v3: can-3v3 {
+ reg_can_3v3: regulator@6 {
compatible = "regulator-fixed";
+ reg = <6>;
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index d3958da..9348ce5 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -116,7 +116,6 @@
pinctrl-0 = <&lcdif_24bit_pins_a
&lcdif_pins_m28>;
display = <&display>;
- reset-active-high;
status = "okay";
display: display0 {
@@ -180,7 +179,7 @@
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
disable-over-current;
status = "okay";
};
@@ -229,33 +228,39 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- reg_vddio_sd0: vddio-sd0 {
+ reg_vddio_sd0: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 29 0>;
};
- reg_vddio_sd1: vddio-sd1 {
+ reg_vddio_sd1: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
regulator-name = "vddio-sd1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 0>;
};
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@3 {
compatible = "regulator-fixed";
+ reg = <3>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 8e2477f..8536b0d 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -248,14 +248,14 @@
usb0: usb@80080000 {
vbus-supply = <®_usb0_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy0_pins_a>;
+ pinctrl-0 = <&usb0_pins_a>;
status = "okay";
};
usb1: usb@80090000 {
vbus-supply = <®_usb1_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-0 = <&usb1_pins_a>;
status = "okay";
};
@@ -285,33 +285,39 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- reg_vddio_sd0: vddio-sd0 {
+ reg_vddio_sd0: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "vddio-sd0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 28 0>;
};
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 12 0>;
};
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@3 {
compatible = "regulator-fixed";
+ reg = <3>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 4870f07..0ce3cb8 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -106,7 +106,7 @@
usb0: usb@80080000 {
vbus-supply = <®_usb0_vbus>;
pinctrl-names = "default";
- pinctrl-0 = <&usbphy0_pins_b>;
+ pinctrl-0 = <&usb0_pins_b>;
status = "okay";
};
@@ -127,9 +127,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index be5a055..3c54e8d 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -43,9 +43,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_usb0_vbus: usb0_vbus {
+ reg_usb0_vbus: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -53,8 +56,9 @@
enable-active-high;
};
- reg_usb1_vbus: usb1_vbus {
+ reg_usb1_vbus: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -62,24 +66,27 @@
enable-active-high;
};
- reg_2p5v: 2p5v {
+ reg_2p5v: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@3 {
compatible = "regulator-fixed";
+ reg = <3>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- reg_can_xcvr: can-xcvr {
+ reg_can_xcvr: regulator@4 {
compatible = "regulator-fixed";
+ reg = <4>;
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -89,8 +96,9 @@
pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
};
- reg_lcd: lcd-power {
+ reg_lcd: regulator@5 {
compatible = "regulator-fixed";
+ reg = <5>;
regulator-name = "LCD POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -98,8 +106,9 @@
enable-active-high;
};
- reg_lcd_reset: lcd-reset {
+ reg_lcd_reset: regulator@6 {
compatible = "regulator-fixed";
+ reg = <6>;
regulator-name = "LCD RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index f8e9b20..90a5795 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -32,6 +32,8 @@
serial4 = &auart4;
spi0 = &ssp1;
spi1 = &ssp2;
+ usbphy0 = &usbphy0;
+ usbphy1 = &usbphy1;
};
cpus {
@@ -343,6 +345,19 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ auart2_pins_a: auart2-pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_AUART2_RX__AUART2_RX
+ MX28_PAD_AUART2_TX__AUART2_TX
+ MX28_PAD_AUART2_CTS__AUART2_CTS
+ MX28_PAD_AUART2_RTS__AUART2_RTS
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
auart3_pins_a: auart3@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -655,6 +670,33 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ lcdif_18bit_pins_a: lcdif-18bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_LCD_D00__LCD_D0
+ MX28_PAD_LCD_D01__LCD_D1
+ MX28_PAD_LCD_D02__LCD_D2
+ MX28_PAD_LCD_D03__LCD_D3
+ MX28_PAD_LCD_D04__LCD_D4
+ MX28_PAD_LCD_D05__LCD_D5
+ MX28_PAD_LCD_D06__LCD_D6
+ MX28_PAD_LCD_D07__LCD_D7
+ MX28_PAD_LCD_D08__LCD_D8
+ MX28_PAD_LCD_D09__LCD_D9
+ MX28_PAD_LCD_D10__LCD_D10
+ MX28_PAD_LCD_D11__LCD_D11
+ MX28_PAD_LCD_D12__LCD_D12
+ MX28_PAD_LCD_D13__LCD_D13
+ MX28_PAD_LCD_D14__LCD_D14
+ MX28_PAD_LCD_D15__LCD_D15
+ MX28_PAD_LCD_D16__LCD_D16
+ MX28_PAD_LCD_D17__LCD_D17
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
lcdif_16bit_pins_a: lcdif-16bit@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -743,7 +785,7 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
- usbphy0_pins_a: usbphy0@0 {
+ usb0_pins_a: usb0@0 {
reg = <0>;
fsl,pinmux-ids = <
MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
@@ -753,7 +795,7 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
- usbphy0_pins_b: usbphy0@1 {
+ usb0_pins_b: usb0@1 {
reg = <1>;
fsl,pinmux-ids = <
MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
@@ -763,7 +805,7 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};
- usbphy1_pins_a: usbphy1@0 {
+ usb1_pins_a: usb1@0 {
reg = <0>;
fsl,pinmux-ids = <
MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
@@ -782,6 +824,17 @@
fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <MXS_PULL_ENABLE>;
};
+
+ usb0_id_pins_b: usb0id1@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM2__USB0_ID
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
};
digctl: digctl@8001c000 {
@@ -946,6 +999,7 @@
20 21 22 23 24 25>;
status = "disabled";
clocks = <&clks 41>;
+ #io-channel-cells = <1>;
};
spdif: spdif@80054000 {
@@ -1130,4 +1184,9 @@
status = "disabled";
};
};
+
+ iio_hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&lradc 8>;
+ };
};
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 0000000..906ae93
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX35";
+ compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+ memory {
+ reg = <0x80000000 0x8000000>; /* 128M */
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ imx35-eukrea {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK 0x80000000
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
+ MX35_PAD_FEC_COL__FEC_COL 0x80000000
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0 0x80000000
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0 0x80000000
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX35_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX35_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR 0x80000000
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR 0x80000000
+ MX35_PAD_FEC_CRS__FEC_CRS 0x80000000
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1 0x80000000
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1 0x80000000
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2 0x80000000
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2 0x80000000
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3 0x80000000
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000
+ MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000
+ >;
+ };
+ };
+};
+
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 0000000..1bdec21
--- /dev/null
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX35";
+ compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bp1>;
+
+ bp1 {
+ label = "BP1";
+ gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_MISC>;
+ gpio-key,wakeup;
+ linux,input-type = <1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led1>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio3 24>;
+ status = "okay";
+};
+
+&i2c1 {
+ tlv320aic23: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+};
+
+&iomuxc {
+ imx35-eukrea {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS 0x80000000
+ MX35_PAD_STXD4__AUDMUX_AUD4_TXD 0x80000000
+ MX35_PAD_SRXD4__AUDMUX_AUD4_RXD 0x80000000
+ MX35_PAD_SCK4__AUDMUX_AUD4_TXC 0x80000000
+ >;
+ };
+
+ pinctrl_bp1: bp1grp {
+ fsl,pins = <MX35_PAD_LD19__GPIO3_25 0x80000000>;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000
+ MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000
+ MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000
+ MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000
+ MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000
+ MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000
+ MX35_PAD_LD18__GPIO3_24 0x80000000 /* CD */
+ >;
+ };
+
+ pinctrl_led1: led1grp {
+ fsl,pins = <MX35_PAD_LD23__GPIO3_29 0x80000000>;
+ };
+
+ pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
+ fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5
+ MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5
+ MX35_PAD_CTS1__UART1_CTS 0x1c5
+ MX35_PAD_RTS1__UART1_RTS 0x1c5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX35_PAD_RXD2__UART2_RXD_MUX 0x1c5
+ MX35_PAD_TXD2__UART2_TXD_MUX 0x1c5
+ MX35_PAD_RTS2__UART2_RTS 0x1c5
+ MX35_PAD_CTS2__UART2_CTS 0x1c5
+ >;
+ };
+ };
+};
+
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
new file mode 100644
index 0000000..88b218f
--- /dev/null
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -0,0 +1,359 @@
+/*
+ * Copyright 2012 Steffen Trumtrar, Pengutronix
+ *
+ * based on imx27.dtsi
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "imx35-pinfunc.h"
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ spi0 = &spi1;
+ spi1 = &spi2;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm1136";
+ device_type = "cpu";
+ };
+ };
+
+ avic: avic-interrupt-controller@68000000 {
+ compatible = "fsl,imx35-avic", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x68000000 0x10000000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&avic>;
+ ranges;
+
+ L2: l2-cache@30000000 {
+ compatible = "arm,l210-cache";
+ reg = <0x30000000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ aips1: aips@43f00000 {
+ compatible = "fsl,aips", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x43f00000 0x100000>;
+ ranges;
+
+ i2c1: i2c@43f80000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f80000 0x4000>;
+ clocks = <&clks 51>;
+ clock-names = "ipg_per";
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@43f84000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f84000 0x4000>;
+ clocks = <&clks 53>;
+ clock-names = "ipg_per";
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ uart1: serial@43f90000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ clocks = <&clks 9>, <&clks 70>;
+ clock-names = "ipg", "per";
+ interrupts = <45>;
+ status = "disabled";
+ };
+
+ uart2: serial@43f94000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x43f94000 0x4000>;
+ clocks = <&clks 9>, <&clks 71>;
+ clock-names = "ipg", "per";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@43f98000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+ reg = <0x43f98000 0x4000>;
+ clocks = <&clks 52>;
+ clock-names = "ipg_per";
+ interrupts = <4>;
+ status = "disabled";
+ };
+
+ ssi1: ssi@43fa0000 {
+ compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
+ reg = <0x43fa0000 0x4000>;
+ interrupts = <11>;
+ clocks = <&clks 68>;
+ dmas = <&sdma 28 0 0>,
+ <&sdma 29 0 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+ status = "disabled";
+ };
+
+ spi1: cspi@43fa4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-cspi";
+ reg = <0x43fa4000 0x4000>;
+ clocks = <&clks 35 &clks 35>;
+ clock-names = "ipg", "per";
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ iomuxc: iomuxc@43fac000 {
+ compatible = "fsl,imx35-iomuxc";
+ reg = <0x43fac000 0x4000>;
+ };
+ };
+
+ spba: spba-bus@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x100000>;
+ ranges;
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ clocks = <&clks 9>, <&clks 72>;
+ clock-names = "ipg", "per";
+ interrupts = <18>;
+ status = "disabled";
+ };
+
+ spi2: cspi@50010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx35-cspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <13>;
+ clocks = <&clks 36 &clks 36>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ fec: fec@50038000 {
+ compatible = "fsl,imx35-fec", "fsl,imx27-fec";
+ reg = <0x50038000 0x4000>;
+ clocks = <&clks 46>, <&clks 8>;
+ clock-names = "ipg", "ahb";
+ interrupts = <57>;
+ status = "disabled";
+ };
+ };
+
+ aips2: aips@53f00000 {
+ compatible = "fsl,aips", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x53f00000 0x100000>;
+ ranges;
+
+ clks: ccm@53f80000 {
+ compatible = "fsl,imx35-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ gpio3: gpio@53fa4000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fa4000 0x4000>;
+ interrupts = <56>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ esdhc1: esdhc@53fb4000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <7>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc2: esdhc@53fb8000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fb8000 0x4000>;
+ interrupts = <8>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 44>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc3: esdhc@53fbc000 {
+ compatible = "fsl,imx35-esdhc";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <9>;
+ clocks = <&clks 9>, <&clks 8>, <&clks 45>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ audmux: audmux@53fc4000 {
+ compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
+ reg = <0x53fc4000 0x4000>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@53fcc000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <52>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@53fd0000 {
+ compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+ reg = <0x53fd0000 0x4000>;
+ interrupts = <51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sdma: sdma@53fd4000 {
+ compatible = "fsl,imx35-sdma";
+ reg = <0x53fd4000 0x4000>;
+ clocks = <&clks 9>, <&clks 65>;
+ clock-names = "ipg", "ahb";
+ #dma-cells = <3>;
+ interrupts = <34>;
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
+ };
+
+ wdog: wdog@53fdc000 {
+ compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
+ reg = <0x53fdc000 0x4000>;
+ clocks = <&clks 74>;
+ clock-names = "";
+ interrupts = <55>;
+ };
+
+ can1: can@53fe4000 {
+ compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fe4000 0x1000>;
+ clocks = <&clks 33>;
+ clock-names = "ipg";
+ interrupts = <43>;
+ status = "disabled";
+ };
+
+ can2: can@53fe8000 {
+ compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+ reg = <0x53fe8000 0x1000>;
+ clocks = <&clks 34>;
+ clock-names = "ipg";
+ interrupts = <44>;
+ status = "disabled";
+ };
+
+ usbotg: usb@53ff4000 {
+ compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+ reg = <0x53ff4000 0x0200>;
+ interrupts = <37>;
+ clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,usbmisc = <&usbmisc 0>;
+ status = "disabled";
+ };
+
+ usbhost1: usb@53ff4400 {
+ compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+ reg = <0x53ff4400 0x0200>;
+ interrupts = <35>;
+ clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@53ff4600 {
+ #index-cells = <1>;
+ compatible = "fsl,imx35-usbmisc";
+ clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+ clock-names = "ipg", "ahb", "per";
+ reg = <0x53ff4600 0x00f>;
+ };
+ };
+
+ emi@80000000 { /* External Memory Interface */
+ compatible = "fsl,emi", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x40000000>;
+ ranges;
+
+ nfc: nand@bb000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,imx35-nand", "fsl,imx25-nand";
+ reg = <0xbb000000 0x2000>;
+ clocks = <&clks 29>;
+ clock-names = "";
+ interrupts = <33>;
+ status = "disabled";
+ };
+
+ weim: weim@b8002000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&clks 0>;
+ compatible = "fsl,imx35-weim", "fsl,imx27-weim";
+ reg = <0xb8002000 0x1000>;
+ ranges = <
+ 0 0 0xa0000000 0x8000000
+ 1 0 0xa8000000 0x8000000
+ 2 0 0xb0000000 0x2000000
+ 3 0 0xb2000000 0x2000000
+ 4 0 0xb4000000 0x2000000
+ 5 0 0xb6000000 0x2000000
+ >;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
new file mode 100644
index 0000000..1b22512
--- /dev/null
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx50.dtsi"
+
+/ {
+ model = "Freescale i.MX50 Evaluation Kit";
+ compatible = "fsl,imx50-evk", "fsl,imx50";
+
+ memory {
+ reg = <0x70000000 0x80000000>;
+ };
+};
+
+&cspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cspi>;
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
+ status = "okay";
+
+ flash: m25p32@1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "m25p32", "m25p80";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "kernel";
+ reg = <0x100000 0x300000>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio4 12 0>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx50-evk {
+ pinctrl_cspi: cspigrp {
+ fsl,pins = <
+ MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x00
+ MX50_PAD_CSPI_MISO__CSPI_MISO 0x00
+ MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00
+ MX50_PAD_CSPI_SS0__GPIO4_11 0xc4
+ MX50_PAD_ECSPI1_MOSI__CSPI_SS1 0xf4
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX50_PAD_SSI_RXFS__FEC_MDC 0x80
+ MX50_PAD_SSI_RXC__FEC_MDIO 0x80
+ MX50_PAD_DISP_D0__FEC_TX_CLK 0x80
+ MX50_PAD_DISP_D1__FEC_RX_ERR 0x80
+ MX50_PAD_DISP_D2__FEC_RX_DV 0x80
+ MX50_PAD_DISP_D3__FEC_RDATA_1 0x80
+ MX50_PAD_DISP_D4__FEC_RDATA_0 0x80
+ MX50_PAD_DISP_D5__FEC_TX_EN 0x80
+ MX50_PAD_DISP_D6__FEC_TDATA_1 0x80
+ MX50_PAD_DISP_D7__FEC_TDATA_0 0x80
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX50_PAD_UART1_TXD__UART1_TXD_MUX 0x1e4
+ MX50_PAD_UART1_RXD__UART1_RXD_MUX 0x1e4
+ MX50_PAD_UART1_RTS__UART1_RTS 0x1e4
+ MX50_PAD_UART1_CTS__UART1_CTS 0x1e4
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&usbh2 {
+ status = "okay";
+};
+
+&usbh3 {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h
new file mode 100644
index 0000000..97e6e7f
--- /dev/null
+++ b/arch/arm/boot/dts/imx50-pinfunc.h
@@ -0,0 +1,923 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX50_PINFUNC_H
+#define __DTS_IMX50_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX50_PAD_KEY_COL0__KPP_COL_0 0x020 0x2cc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL0__GPIO4_0 0x020 0x2cc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL0__EIM_NANDF_CLE 0x020 0x2cc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL0__CTI_TRIGIN7 0x020 0x2cc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL0__USBPHY1_TXREADY 0x020 0x2cc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW0__KPP_ROW_0 0x024 0x2d0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW0__GPIO4_1 0x024 0x2d0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE 0x024 0x2d0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7 0x024 0x2d0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID 0x024 0x2d0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL1__KPP_COL_1 0x028 0x2d4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL1__GPIO4_2 0x028 0x2d4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL1__EIM_NANDF_CEN_0 0x028 0x2d4 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL1__CTI_TRIGOUT_ACK6 0x028 0x2d4 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL1__USBPHY1_RXACTIVE 0x028 0x2d4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW1__KPP_ROW_1 0x02c 0x2d8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW1__GPIO4_3 0x02c 0x2d8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1 0x02c 0x2d8 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7 0x02c 0x2d8 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR 0x02c 0x2d8 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL2__KPP_COL_1 0x030 0x2dc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL2__GPIO4_4 0x030 0x2dc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2 0x030 0x2dc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL2__CTI_TRIGOUT6 0x030 0x2dc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL2__USBPHY1_SIECLOCK 0x030 0x2dc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW2__KPP_ROW_2 0x034 0x2e0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW2__GPIO4_5 0x034 0x2e0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3 0x034 0x2e0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7 0x034 0x2e0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0 0x034 0x2e0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL3__KPP_COL_2 0x038 0x2e4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL3__GPIO4_6 0x038 0x2e4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL3__EIM_NANDF_READY0 0x038 0x2e4 0x7b4 0x2 0x0
+#define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0 0x038 0x2e4 0x7b8 0x6 0x0
+#define MX50_PAD_KEY_COL3__USBPHY1_LINESTATE_1 0x038 0x2e4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW3__KPP_ROW_3 0x03c 0x2e8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW3__GPIO4_7 0x03c 0x2e8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW3__EIM_NANDF_DQS 0x03c 0x2e8 0x7b0 0x2 0x0
+#define MX50_PAD_KEY_ROW3__SDMA_EXT_EVENT_1 0x03c 0x2e8 0x7bc 0x6 0x0
+#define MX50_PAD_KEY_ROW3__USBPHY1_VBUSVALID 0x03c 0x2e8 0x000 0x7 0x0
+#define MX50_PAD_I2C1_SCL__I2C1_SCL 0x040 0x2ec 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SCL__GPIO6_18 0x040 0x2ec 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SCL__UART2_TXD_MUX 0x040 0x2ec 0x7cc 0x2 0x0
+#define MX50_PAD_I2C1_SDA__I2C1_SDA 0x044 0x2f0 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SDA__GPIO6_19 0x044 0x2f0 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SDA__UART2_RXD_MUX 0x044 0x2f0 0x7cc 0x2 0x1
+#define MX50_PAD_I2C2_SCL__I2C2_SCL 0x048 0x2f4 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SCL__GPIO6_20 0x048 0x2f4 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SCL__UART2_CTS 0x048 0x2f4 0x000 0x2 0x0
+#define MX50_PAD_I2C2_SDA__I2C2_SDA 0x04c 0x2f8 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SDA__GPIO6_21 0x04c 0x2f8 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SDA__UART2_RTS 0x04c 0x2f8 0x7c8 0x2 0x1
+#define MX50_PAD_I2C3_SCL__I2C3_SCL 0x050 0x2fc 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SCL__GPIO6_22 0x050 0x2fc 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SCL__FEC_MDC 0x050 0x2fc 0x000 0x2 0x0
+#define MX50_PAD_I2C3_SCL__GPC_PMIC_RDY 0x050 0x2fc 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SCL__GPT_CAPIN1 0x050 0x2fc 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SCL__OBSERVE_MUX_OBSRV_INT_OUT0 0x050 0x2fc 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SCL__USBOH1_USBOTG_OC 0x050 0x2fc 0x7e8 0x7 0x0
+#define MX50_PAD_I2C3_SDA__I2C3_SDA 0x054 0x300 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SDA__GPIO6_23 0x054 0x300 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SDA__FEC_MDIO 0x054 0x300 0x774 0x2 0x0
+#define MX50_PAD_I2C3_SDA__TZIC_PWRFAIL_INT 0x054 0x300 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SDA__SRTC_ALARM_DEB 0x054 0x300 0x000 0x4 0x0
+#define MX50_PAD_I2C3_SDA__GPT_CAPIN2 0x054 0x300 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SDA__OBSERVE_MUX_OBSRV_INT_OUT1 0x054 0x300 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SDA__USBOH1_USBOTG_PWR 0x054 0x300 0x000 0x7 0x0
+#define MX50_PAD_PWM1__PWM1_PWMO 0x058 0x304 0x000 0x0 0x0
+#define MX50_PAD_PWM1__GPIO6_24 0x058 0x304 0x000 0x1 0x0
+#define MX50_PAD_PWM1__USBOH1_USBOTG_OC 0x058 0x304 0x7e8 0x2 0x1
+#define MX50_PAD_PWM1__GPT_CMPOUT1 0x058 0x304 0x000 0x5 0x0
+#define MX50_PAD_PWM1__OBSERVE_MUX_OBSRV_INT_OUT2 0x058 0x304 0x000 0x6 0x0
+#define MX50_PAD_PWM1__SJC_FAIL 0x058 0x304 0x000 0x7 0x0
+#define MX50_PAD_PWM2__PWM2_PWMO 0x05c 0x308 0x000 0x0 0x0
+#define MX50_PAD_PWM2__GPIO6_25 0x05c 0x308 0x000 0x1 0x0
+#define MX50_PAD_PWM2__USBOH1_USBOTG_PWR 0x05c 0x308 0x000 0x2 0x0
+#define MX50_PAD_PWM2__GPT_CMPOUT2 0x05c 0x308 0x000 0x5 0x0
+#define MX50_PAD_PWM2__OBSERVE_MUX_OBSRV_INT_OUT3 0x05c 0x308 0x000 0x6 0x0
+#define MX50_PAD_PWM2__SRC_ANY_PU_RST 0x05c 0x308 0x000 0x7 0x0
+#define MX50_PAD_OWIRE__OWIRE_LINE 0x060 0x30c 0x000 0x0 0x0
+#define MX50_PAD_OWIRE__GPIO6_26 0x060 0x30c 0x000 0x1 0x0
+#define MX50_PAD_OWIRE__USBOH1_USBH1_OC 0x060 0x30c 0x000 0x2 0x0
+#define MX50_PAD_OWIRE__CCM_SSI_EXT1_CLK 0x060 0x30c 0x000 0x3 0x0
+#define MX50_PAD_OWIRE__EPDC_PWRIRQ 0x060 0x30c 0x000 0x4 0x0
+#define MX50_PAD_OWIRE__GPT_CMPOUT3 0x060 0x30c 0x000 0x5 0x0
+#define MX50_PAD_OWIRE__OBSERVE_MUX_OBSRV_INT_OUT4 0x060 0x30c 0x000 0x6 0x0
+#define MX50_PAD_OWIRE__SJC_JTAG_ACT 0x060 0x30c 0x000 0x7 0x0
+#define MX50_PAD_EPITO__EPIT1_EPITO 0x064 0x310 0x000 0x0 0x0
+#define MX50_PAD_EPITO__GPIO6_27 0x064 0x310 0x000 0x1 0x0
+#define MX50_PAD_EPITO__USBOH1_USBH1_PWR 0x064 0x310 0x000 0x2 0x0
+#define MX50_PAD_EPITO__CCM_SSI_EXT2_CLK 0x064 0x310 0x000 0x3 0x0
+#define MX50_PAD_EPITO__DPLLIP1_TOG_EN 0x064 0x310 0x000 0x4 0x0
+#define MX50_PAD_EPITO__GPT_CLK_IN 0x064 0x310 0x000 0x5 0x0
+#define MX50_PAD_EPITO__PMU_IRQ_B 0x064 0x310 0x000 0x6 0x0
+#define MX50_PAD_EPITO__SJC_DE_B 0x064 0x310 0x000 0x7 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_B 0x068 0x314 0x000 0x0 0x0
+#define MX50_PAD_WDOG__GPIO6_28 0x068 0x314 0x000 0x1 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_RST_B_DEB 0x068 0x314 0x000 0x2 0x0
+#define MX50_PAD_WDOG__CCM_XTAL32K 0x068 0x314 0x000 0x6 0x0
+#define MX50_PAD_WDOG__SJC_DONE 0x068 0x314 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXFS__AUDMUX_AUD3_TXFS 0x06c 0x318 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXFS__GPIO6_0 0x06c 0x318 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXFS__SRC_BT_FUSE_RSV_1 0x06c 0x318 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXFS__USBPHY1_DATAOUT_8 0x06c 0x318 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXC__AUDMUX_AUD3_TXC 0x070 0x31c 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXC__GPIO6_1 0x070 0x31c 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXC__SRC_BT_FUSE_RSV_0 0x070 0x31c 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXC__USBPHY1_DATAOUT_9 0x070 0x31c 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXD__AUDMUX_AUD3_TXD 0x074 0x320 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXD__GPIO6_2 0x074 0x320 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXD__CSPI_RDY 0x074 0x320 0x6e8 0x4 0x0
+#define MX50_PAD_SSI_TXD__USBPHY1_DATAOUT_10 0x074 0x320 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXD__AUDMUX_AUD3_RXD 0x078 0x324 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXD__GPIO6_3 0x078 0x324 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXD__CSPI_SS3 0x078 0x324 0x6f4 0x4 0x0
+#define MX50_PAD_SSI_RXD__USBPHY1_DATAOUT_11 0x078 0x324 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXFS__AUDMUX_AUD3_RXFS 0x07c 0x328 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXFS__GPIO6_4 0x07c 0x328 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXFS__UART5_TXD_MUX 0x07c 0x328 0x7e4 0x2 0x0
+#define MX50_PAD_SSI_RXFS__EIM_WEIM_D_6 0x07c 0x328 0x804 0x3 0x0
+#define MX50_PAD_SSI_RXFS__CSPI_SS2 0x07c 0x328 0x6f0 0x4 0x0
+#define MX50_PAD_SSI_RXFS__FEC_COL 0x07c 0x328 0x770 0x5 0x0
+#define MX50_PAD_SSI_RXFS__FEC_MDC 0x07c 0x328 0x000 0x6 0x0
+#define MX50_PAD_SSI_RXFS__USBPHY1_DATAOUT_12 0x07c 0x328 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXC__AUDMUX_AUD3_RXC 0x080 0x32c 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXC__GPIO6_5 0x080 0x32c 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXC__UART5_RXD_MUX 0x080 0x32c 0x7e4 0x2 0x1
+#define MX50_PAD_SSI_RXC__EIM_WEIM_D_7 0x080 0x32c 0x808 0x3 0x0
+#define MX50_PAD_SSI_RXC__CSPI_SS1 0x080 0x32c 0x6ec 0x4 0x0
+#define MX50_PAD_SSI_RXC__FEC_RX_CLK 0x080 0x32c 0x780 0x5 0x0
+#define MX50_PAD_SSI_RXC__FEC_MDIO 0x080 0x32c 0x774 0x6 0x1
+#define MX50_PAD_SSI_RXC__USBPHY1_DATAOUT_13 0x080 0x32c 0x000 0x7 0x0
+#define MX50_PAD_UART1_TXD__UART1_TXD_MUX 0x084 0x330 0x7c4 0x0 0x0
+#define MX50_PAD_UART1_TXD__GPIO6_6 0x084 0x330 0x000 0x1 0x0
+#define MX50_PAD_UART1_TXD__USBPHY1_DATAOUT_14 0x084 0x330 0x000 0x7 0x0
+#define MX50_PAD_UART1_RXD__UART1_RXD_MUX 0x088 0x334 0x7c4 0x0 0x1
+#define MX50_PAD_UART1_RXD__GPIO6_7 0x088 0x334 0x000 0x1 0x0
+#define MX50_PAD_UART1_RXD__USBPHY1_DATAOUT_15 0x088 0x334 0x000 0x7 0x0
+#define MX50_PAD_UART1_CTS__UART1_CTS 0x08c 0x338 0x000 0x0 0x0
+#define MX50_PAD_UART1_CTS__GPIO6_8 0x08c 0x338 0x000 0x1 0x0
+#define MX50_PAD_UART1_CTS__UART5_TXD_MUX 0x08c 0x338 0x7e4 0x2 0x2
+#define MX50_PAD_UART1_CTS__ESDHC4_DAT4 0x08c 0x338 0x760 0x4 0x0
+#define MX50_PAD_UART1_CTS__ESDHC4_CMD 0x08c 0x338 0x74c 0x5 0x0
+#define MX50_PAD_UART1_CTS__USBPHY2_DATAOUT_8 0x08c 0x338 0x000 0x7 0x0
+#define MX50_PAD_UART1_RTS__UART1_RTS 0x090 0x33c 0x7c0 0x0 0x3
+#define MX50_PAD_UART1_RTS__GPIO6_9 0x090 0x33c 0x000 0x1 0x0
+#define MX50_PAD_UART1_RTS__UART5_RXD_MUX 0x090 0x33c 0x7e4 0x2 0x3
+#define MX50_PAD_UART1_RTS__ESDHC4_DAT5 0x090 0x33c 0x764 0x4 0x0
+#define MX50_PAD_UART1_RTS__ESDHC4_CLK 0x090 0x33c 0x748 0x5 0x0
+#define MX50_PAD_UART1_RTS__USBPHY2_DATAOUT_9 0x090 0x33c 0x000 0x7 0x0
+#define MX50_PAD_UART2_TXD__UART2_TXD_MUX 0x094 0x340 0x7cc 0x0 0x2
+#define MX50_PAD_UART2_TXD__GPIO6_10 0x094 0x340 0x000 0x1 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT6 0x094 0x340 0x768 0x4 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT4 0x094 0x340 0x760 0x5 0x1
+#define MX50_PAD_UART2_TXD__USBPHY2_DATAOUT_10 0x094 0x340 0x000 0x7 0x0
+#define MX50_PAD_UART2_RXD__UART2_RXD_MUX 0x098 0x344 0x7cc 0x0 0x3
+#define MX50_PAD_UART2_RXD__GPIO6_11 0x098 0x344 0x000 0x1 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT7 0x098 0x344 0x76c 0x4 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT5 0x098 0x344 0x764 0x5 0x1
+#define MX50_PAD_UART2_RXD__USBPHY2_DATAOUT_11 0x098 0x344 0x000 0x7 0x0
+#define MX50_PAD_UART2_CTS__UART2_CTS 0x09c 0x348 0x000 0x0 0x0
+#define MX50_PAD_UART2_CTS__GPIO6_12 0x09c 0x348 0x000 0x1 0x0
+#define MX50_PAD_UART2_CTS__ESDHC4_CMD 0x09c 0x348 0x74c 0x4 0x1
+#define MX50_PAD_UART2_CTS__ESDHC4_DAT6 0x09c 0x348 0x768 0x5 0x1
+#define MX50_PAD_UART2_CTS__USBPHY2_DATAOUT_12 0x09c 0x348 0x000 0x7 0x0
+#define MX50_PAD_UART2_RTS__UART2_RTS 0x0a0 0x34c 0x7c8 0x0 0x2
+#define MX50_PAD_UART2_RTS__GPIO6_13 0x0a0 0x34c 0x000 0x1 0x0
+#define MX50_PAD_UART2_RTS__ESDHC4_CLK 0x0a0 0x34c 0x748 0x4 0x1
+#define MX50_PAD_UART2_RTS__ESDHC4_DAT7 0x0a0 0x34c 0x76c 0x5 0x1
+#define MX50_PAD_UART2_RTS__USBPHY2_DATAOUT_13 0x0a0 0x34c 0x000 0x7 0x0
+#define MX50_PAD_UART3_TXD__UART3_TXD_MUX 0x0a4 0x350 0x7d4 0x0 0x0
+#define MX50_PAD_UART3_TXD__GPIO6_14 0x0a4 0x350 0x000 0x1 0x0
+#define MX50_PAD_UART3_TXD__ESDHC1_DAT4 0x0a4 0x350 0x000 0x3 0x0
+#define MX50_PAD_UART3_TXD__ESDHC4_DAT0 0x0a4 0x350 0x000 0x4 0x0
+#define MX50_PAD_UART3_TXD__ESDHC2_WP 0x0a4 0x350 0x744 0x5 0x0
+#define MX50_PAD_UART3_TXD__EIM_WEIM_D_12 0x0a4 0x350 0x81c 0x6 0x0
+#define MX50_PAD_UART3_TXD__USBPHY2_DATAOUT_14 0x0a4 0x350 0x000 0x7 0x0
+#define MX50_PAD_UART3_RXD__UART3_RXD_MUX 0x0a8 0x354 0x7d4 0x0 0x1
+#define MX50_PAD_UART3_RXD__GPIO6_15 0x0a8 0x354 0x000 0x1 0x0
+#define MX50_PAD_UART3_RXD__ESDHC1_DAT5 0x0a8 0x354 0x000 0x3 0x0
+#define MX50_PAD_UART3_RXD__ESDHC4_DAT1 0x0a8 0x354 0x754 0x4 0x0
+#define MX50_PAD_UART3_RXD__ESDHC2_CD 0x0a8 0x354 0x740 0x5 0x0
+#define MX50_PAD_UART3_RXD__EIM_WEIM_D_13 0x0a8 0x354 0x820 0x6 0x0
+#define MX50_PAD_UART3_RXD__USBPHY2_DATAOUT_15 0x0a8 0x354 0x000 0x7 0x0
+#define MX50_PAD_UART4_TXD__UART4_TXD_MUX 0x0ac 0x358 0x7dc 0x0 0x0
+#define MX50_PAD_UART4_TXD__GPIO6_16 0x0ac 0x358 0x000 0x1 0x0
+#define MX50_PAD_UART4_TXD__UART3_CTS 0x0ac 0x358 0x7d0 0x2 0x0
+#define MX50_PAD_UART4_TXD__ESDHC1_DAT6 0x0ac 0x358 0x000 0x3 0x0
+#define MX50_PAD_UART4_TXD__ESDHC4_DAT2 0x0ac 0x358 0x758 0x4 0x0
+#define MX50_PAD_UART4_TXD__ESDHC2_LCTL 0x0ac 0x358 0x000 0x5 0x0
+#define MX50_PAD_UART4_TXD__EIM_WEIM_D_14 0x0ac 0x358 0x824 0x6 0x0
+#define MX50_PAD_UART4_RXD__UART4_RXD_MUX 0x0b0 0x35c 0x7dc 0x0 0x1
+#define MX50_PAD_UART4_RXD__GPIO6_17 0x0b0 0x35c 0x000 0x1 0x0
+#define MX50_PAD_UART4_RXD__UART3_RTS 0x0b0 0x35c 0x7d0 0x2 0x1
+#define MX50_PAD_UART4_RXD__ESDHC1_DAT7 0x0b0 0x35c 0x000 0x3 0x0
+#define MX50_PAD_UART4_RXD__ESDHC4_DAT3 0x0b0 0x35c 0x75c 0x4 0x0
+#define MX50_PAD_UART4_RXD__ESDHC1_LCTL 0x0b0 0x35c 0x000 0x5 0x0
+#define MX50_PAD_UART4_RXD__EIM_WEIM_D_15 0x0b0 0x35c 0x828 0x6 0x0
+#define MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x0b4 0x360 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SCLK__GPIO4_8 0x0b4 0x360 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x0b8 0x364 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MOSI__GPIO4_9 0x0b8 0x364 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MISO__CSPI_MISO 0x0bc 0x368 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MISO__GPIO4_10 0x0bc 0x368 0x000 0x1 0x0
+#define MX50_PAD_CSPI_SS0__CSPI_SS0 0x0c0 0x36c 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SS0__GPIO4_11 0x0c0 0x36c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x0c4 0x370 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SCLK__GPIO4_12 0x0c4 0x370 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY 0x0c4 0x370 0x6e8 0x2 0x1
+#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY 0x0c4 0x370 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SCLK__UART3_RTS 0x0c4 0x370 0x7d0 0x4 0x2
+#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE_6 0x0c4 0x370 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SCLK__EIM_WEIM_D_8 0x0c4 0x370 0x80c 0x7 0x0
+#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x0c8 0x374 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x0c8 0x374 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1 0x0c8 0x374 0x6ec 0x2 0x1
+#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1 0x0c8 0x374 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MOSI__UART3_CTS 0x0c8 0x374 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE_7 0x0c8 0x374 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MOSI__EIM_WEIM_D_9 0x0c8 0x374 0x810 0x7 0x0
+#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO 0x0cc 0x378 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MISO__GPIO4_14 0x0cc 0x378 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MISO__CSPI_SS2 0x0cc 0x378 0x6f0 0x2 0x1
+#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2 0x0cc 0x378 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MISO__UART4_RTS 0x0cc 0x378 0x7d8 0x4 0x0
+#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE_8 0x0cc 0x378 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MISO__EIM_WEIM_D_10 0x0cc 0x378 0x814 0x7 0x0
+#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0 0x0d0 0x37c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SS0__GPIO4_15 0x0d0 0x37c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SS0__CSPI_SS3 0x0d0 0x37c 0x6f4 0x2 0x1
+#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3 0x0d0 0x37c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SS0__UART4_CTS 0x0d0 0x37c 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE_9 0x0d0 0x37c 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SS0__EIM_WEIM_D_11 0x0d0 0x37c 0x818 0x7 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x0d4 0x380 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SCLK__GPIO4_16 0x0d4 0x380 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR_RWN 0x0d4 0x380 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY 0x0d4 0x380 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SCLK__UART5_RTS 0x0d4 0x380 0x7e0 0x4 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK 0x0d4 0x380 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_NANDF_CEN_4 0x0d4 0x380 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_WEIM_D_8 0x0d4 0x380 0x80c 0x7 0x1
+#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x0d8 0x384 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MOSI__GPIO4_17 0x0d8 0x384 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RE_E 0x0d8 0x384 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1 0x0d8 0x384 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MOSI__UART5_CTS 0x0d8 0x384 0x7e0 0x4 0x1
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_ENABLE 0x0d8 0x384 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_NANDF_CEN_5 0x0d8 0x384 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_WEIM_D_9 0x0d8 0x384 0x810 0x7 0x1
+#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO 0x0dc 0x388 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MISO__GPIO4_18 0x0dc 0x388 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS 0x0dc 0x388 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2 0x0dc 0x388 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MISO__UART5_TXD_MUX 0x0dc 0x388 0x7e4 0x4 0x4
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC 0x0dc 0x388 0x73c 0x5 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_NANDF_CEN_6 0x0dc 0x388 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_WEIM_D_10 0x0dc 0x388 0x814 0x7 0x1
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0 0x0e0 0x38c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SS0__GPIO4_19 0x0e0 0x38c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS 0x0e0 0x38c 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS3 0x0e0 0x38c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SS0__UART5_RXD_MUX 0x0e0 0x38c 0x7e4 0x4 0x5
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC 0x0e0 0x38c 0x6f8 0x5 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_NANDF_CEN_7 0x0e0 0x38c 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_WEIM_D_11 0x0e0 0x38c 0x818 0x7 0x1
+#define MX50_PAD_SD1_CLK__ESDHC1_CLK 0x0e4 0x390 0x000 0x0 0x0
+#define MX50_PAD_SD1_CLK__GPIO5_0 0x0e4 0x390 0x000 0x1 0x0
+#define MX50_PAD_SD1_CLK__CCM_CLKO 0x0e4 0x390 0x000 0x7 0x0
+#define MX50_PAD_SD1_CMD__ESDHC1_CMD 0x0e8 0x394 0x000 0x0 0x0
+#define MX50_PAD_SD1_CMD__GPIO5_1 0x0e8 0x394 0x000 0x1 0x0
+#define MX50_PAD_SD1_CMD__CCM_CLKO2 0x0e8 0x394 0x000 0x7 0x0
+#define MX50_PAD_SD1_D0__ESDHC1_DAT0 0x0ec 0x398 0x000 0x0 0x0
+#define MX50_PAD_SD1_D0__GPIO5_2 0x0ec 0x398 0x000 0x1 0x0
+#define MX50_PAD_SD1_D0__CCM_PLL1_BYP 0x0ec 0x398 0x6dc 0x7 0x0
+#define MX50_PAD_SD1_D1__ESDHC1_DAT1 0x0f0 0x39c 0x000 0x0 0x0
+#define MX50_PAD_SD1_D1__GPIO5_3 0x0f0 0x39c 0x000 0x1 0x0
+#define MX50_PAD_SD1_D1__CCM_PLL2_BYP 0x0f0 0x39c 0x000 0x7 0x0
+#define MX50_PAD_SD1_D2__ESDHC1_DAT2 0x0f4 0x3a0 0x000 0x0 0x0
+#define MX50_PAD_SD1_D2__GPIO5_4 0x0f4 0x3a0 0x000 0x1 0x0
+#define MX50_PAD_SD1_D2__CCM_PLL3_BYP 0x0f4 0x3a0 0x6e4 0x7 0x0
+#define MX50_PAD_SD1_D3__ESDHC1_DAT3 0x0f8 0x3a4 0x000 0x0 0x0
+#define MX50_PAD_SD1_D3__GPIO5_5 0x0f8 0x3a4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__ESDHC2_CLK 0x0fc 0x3a8 0x000 0x0 0x0
+#define MX50_PAD_SD2_CLK__GPIO5_6 0x0fc 0x3a8 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__MSHC_SCLK 0x0fc 0x3a8 0x000 0x2 0x0
+#define MX50_PAD_SD2_CMD__ESDHC2_CMD 0x100 0x3ac 0x000 0x0 0x0
+#define MX50_PAD_SD2_CMD__GPIO5_7 0x100 0x3ac 0x000 0x1 0x0
+#define MX50_PAD_SD2_CMD__MSHC_BS 0x100 0x3ac 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__ESDHC2_DAT0 0x104 0x3b0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D0__GPIO5_8 0x104 0x3b0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D0__MSHC_DATA_0 0x104 0x3b0 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__KPP_COL_4 0x104 0x3b0 0x790 0x3 0x0
+#define MX50_PAD_SD2_D1__ESDHC2_DAT1 0x108 0x3b4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D1__GPIO5_9 0x108 0x3b4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D1__MSHC_DATA_1 0x108 0x3b4 0x000 0x2 0x0
+#define MX50_PAD_SD2_D1__KPP_ROW_4 0x108 0x3b4 0x7a0 0x3 0x0
+#define MX50_PAD_SD2_D2__ESDHC2_DAT2 0x10c 0x3b8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D2__GPIO5_10 0x10c 0x3b8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D2__MSHC_DATA_2 0x10c 0x3b8 0x000 0x2 0x0
+#define MX50_PAD_SD2_D2__KPP_COL_5 0x10c 0x3b8 0x794 0x3 0x0
+#define MX50_PAD_SD2_D3__ESDHC2_DAT3 0x110 0x3bc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D3__GPIO5_11 0x110 0x3bc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D3__MSHC_DATA_3 0x110 0x3bc 0x000 0x2 0x0
+#define MX50_PAD_SD2_D3__KPP_ROW_5 0x110 0x3bc 0x7a4 0x3 0x0
+#define MX50_PAD_SD2_D4__ESDHC2_DAT4 0x114 0x3c0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D4__GPIO5_12 0x114 0x3c0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D4__AUDMUX_AUD4_RXFS 0x114 0x3c0 0x6d0 0x2 0x0
+#define MX50_PAD_SD2_D4__KPP_COL_6 0x114 0x3c0 0x798 0x3 0x0
+#define MX50_PAD_SD2_D4__EIM_WEIM_D_0 0x114 0x3c0 0x7ec 0x4 0x0
+#define MX50_PAD_SD2_D4__CCM_CCM_OUT_0 0x114 0x3c0 0x000 0x7 0x0
+#define MX50_PAD_SD2_D5__ESDHC2_DAT5 0x118 0x3c4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D5__GPIO5_13 0x118 0x3c4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D5__AUDMUX_AUD4_RXC 0x118 0x3c4 0x6cc 0x2 0x0
+#define MX50_PAD_SD2_D5__KPP_ROW_6 0x118 0x3c4 0x7a8 0x3 0x0
+#define MX50_PAD_SD2_D5__EIM_WEIM_D_1 0x118 0x3c4 0x7f0 0x4 0x0
+#define MX50_PAD_SD2_D5__CCM_CCM_OUT_1 0x118 0x3c4 0x000 0x7 0x0
+#define MX50_PAD_SD2_D6__ESDHC2_DAT6 0x11c 0x3c8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D6__GPIO5_14 0x11c 0x3c8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D6__AUDMUX_AUD4_RXD 0x11c 0x3c8 0x6c4 0x2 0x0
+#define MX50_PAD_SD2_D6__KPP_COL_7 0x11c 0x3c8 0x79c 0x3 0x0
+#define MX50_PAD_SD2_D6__EIM_WEIM_D_2 0x11c 0x3c8 0x7f4 0x4 0x0
+#define MX50_PAD_SD2_D6__CCM_CCM_OUT_2 0x11c 0x3c8 0x000 0x7 0x0
+#define MX50_PAD_SD2_D7__ESDHC2_DAT7 0x120 0x3cc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D7__GPIO5_15 0x120 0x3cc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D7__AUDMUX_AUD4_TXFS 0x120 0x3cc 0x6d8 0x2 0x0
+#define MX50_PAD_SD2_D7__KPP_ROW_7 0x120 0x3cc 0x7ac 0x3 0x0
+#define MX50_PAD_SD2_D7__EIM_WEIM_D_3 0x120 0x3cc 0x7f8 0x4 0x0
+#define MX50_PAD_SD2_D7__CCM_STOP 0x120 0x3cc 0x000 0x7 0x0
+#define MX50_PAD_SD2_WP__ESDHC2_WP 0x124 0x3d0 0x744 0x0 0x1
+#define MX50_PAD_SD2_WP__GPIO5_16 0x124 0x3d0 0x000 0x1 0x0
+#define MX50_PAD_SD2_WP__AUDMUX_AUD4_TXD 0x124 0x3d0 0x6c8 0x2 0x0
+#define MX50_PAD_SD2_WP__EIM_WEIM_D_4 0x124 0x3d0 0x7fc 0x4 0x0
+#define MX50_PAD_SD2_WP__CCM_WAIT 0x124 0x3d0 0x000 0x7 0x0
+#define MX50_PAD_SD2_CD__ESDHC2_CD 0x128 0x3d4 0x740 0x0 0x1
+#define MX50_PAD_SD2_CD__GPIO5_17 0x128 0x3d4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CD__AUDMUX_AUD4_TXC 0x128 0x3d4 0x6d4 0x2 0x0
+#define MX50_PAD_SD2_CD__EIM_WEIM_D_5 0x128 0x3d4 0x800 0x4 0x0
+#define MX50_PAD_SD2_CD__CCM_REF_EN_B 0x128 0x3d4 0x000 0x7 0x0
+#define MX50_PAD_DISP_D0__ELCDIF_DAT_0 0x12c 0x40c 0x6fc 0x0 0x0
+#define MX50_PAD_DISP_D0__GPIO2_0 0x12c 0x40c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D0__FEC_TX_CLK 0x12c 0x40c 0x78c 0x2 0x0
+#define MX50_PAD_DISP_D0__EIM_WEIM_A_16 0x12c 0x40c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D0__SDMA_DEBUG_PC_0 0x12c 0x40c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D0__USBPHY1_VSTATUS_0 0x12c 0x40c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D1__ELCDIF_DAT_1 0x130 0x410 0x700 0x0 0x0
+#define MX50_PAD_DISP_D1__GPIO2_1 0x130 0x410 0x000 0x1 0x0
+#define MX50_PAD_DISP_D1__FEC_RX_ERR 0x130 0x410 0x788 0x2 0x0
+#define MX50_PAD_DISP_D1__EIM_WEIM_A_17 0x130 0x410 0x000 0x3 0x0
+#define MX50_PAD_DISP_D1__SDMA_DEBUG_PC_1 0x130 0x410 0x000 0x6 0x0
+#define MX50_PAD_DISP_D1__USBPHY1_VSTATUS_1 0x130 0x410 0x000 0x7 0x0
+#define MX50_PAD_DISP_D2__ELCDIF_DAT_2 0x134 0x414 0x704 0x0 0x0
+#define MX50_PAD_DISP_D2__GPIO2_2 0x134 0x414 0x000 0x1 0x0
+#define MX50_PAD_DISP_D2__FEC_RX_DV 0x134 0x414 0x784 0x2 0x0
+#define MX50_PAD_DISP_D2__EIM_WEIM_A_18 0x134 0x414 0x000 0x3 0x0
+#define MX50_PAD_DISP_D2__SDMA_DEBUG_PC_2 0x134 0x414 0x000 0x6 0x0
+#define MX50_PAD_DISP_D2__USBPHY1_VSTATUS_2 0x134 0x414 0x000 0x7 0x0
+#define MX50_PAD_DISP_D3__ELCDIF_DAT_3 0x138 0x418 0x708 0x0 0x0
+#define MX50_PAD_DISP_D3__GPIO2_3 0x138 0x418 0x000 0x1 0x0
+#define MX50_PAD_DISP_D3__FEC_RDATA_1 0x138 0x418 0x77c 0x2 0x0
+#define MX50_PAD_DISP_D3__EIM_WEIM_A_19 0x138 0x418 0x000 0x3 0x0
+#define MX50_PAD_DISP_D3__FEC_COL 0x138 0x418 0x770 0x4 0x1
+#define MX50_PAD_DISP_D3__SDMA_DEBUG_PC_3 0x138 0x418 0x000 0x6 0x0
+#define MX50_PAD_DISP_D3__USBPHY1_VSTATUS_3 0x138 0x418 0x000 0x7 0x0
+#define MX50_PAD_DISP_D4__ELCDIF_DAT_4 0x13c 0x41c 0x70c 0x0 0x0
+#define MX50_PAD_DISP_D4__GPIO2_4 0x13c 0x41c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D4__FEC_RDATA_0 0x13c 0x41c 0x778 0x2 0x0
+#define MX50_PAD_DISP_D4__EIM_WEIM_A_20 0x13c 0x41c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D4__SDMA_DEBUG_PC_4 0x13c 0x41c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D4__USBPHY1_VSTATUS_4 0x13c 0x41c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D5__ELCDIF_DAT_5 0x140 0x420 0x710 0x0 0x0
+#define MX50_PAD_DISP_D5__GPIO2_5 0x140 0x420 0x000 0x1 0x0
+#define MX50_PAD_DISP_D5__FEC_TX_EN 0x140 0x420 0x000 0x2 0x0
+#define MX50_PAD_DISP_D5__EIM_WEIM_A_21 0x140 0x420 0x000 0x3 0x0
+#define MX50_PAD_DISP_D5__SDMA_DEBUG_PC_5 0x140 0x420 0x000 0x6 0x0
+#define MX50_PAD_DISP_D5__USBPHY1_VSTATUS_5 0x140 0x420 0x000 0x7 0x0
+#define MX50_PAD_DISP_D6__ELCDIF_DAT_6 0x144 0x424 0x714 0x0 0x0
+#define MX50_PAD_DISP_D6__GPIO2_6 0x144 0x424 0x000 0x1 0x0
+#define MX50_PAD_DISP_D6__FEC_TDATA_1 0x144 0x424 0x000 0x2 0x0
+#define MX50_PAD_DISP_D6__EIM_WEIM_A_22 0x144 0x424 0x000 0x3 0x0
+#define MX50_PAD_DISP_D6__FEC_RX_CLK 0x144 0x424 0x780 0x4 0x1
+#define MX50_PAD_DISP_D6__SDMA_DEBUG_PC_6 0x144 0x424 0x000 0x6 0x0
+#define MX50_PAD_DISP_D6__USBPHY1_VSTATUS_6 0x144 0x424 0x000 0x7 0x0
+#define MX50_PAD_DISP_D7__ELCDIF_DAT_7 0x148 0x428 0x718 0x0 0x0
+#define MX50_PAD_DISP_D7__GPIO2_7 0x148 0x428 0x000 0x1 0x0
+#define MX50_PAD_DISP_D7__FEC_TDATA_0 0x148 0x428 0x000 0x2 0x0
+#define MX50_PAD_DISP_D7__EIM_WEIM_A_23 0x148 0x428 0x000 0x3 0x0
+#define MX50_PAD_DISP_D7__SDMA_DEBUG_PC_7 0x148 0x428 0x000 0x6 0x0
+#define MX50_PAD_DISP_D7__USBPHY1_VSTATUS_7 0x148 0x428 0x000 0x7 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_WR_RWN 0x14c 0x42c 0x000 0x0 0x0
+#define MX50_PAD_DISP_WR__GPIO2_16 0x14c 0x42c 0x000 0x1 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_DOTCLK 0x14c 0x42c 0x000 0x2 0x0
+#define MX50_PAD_DISP_WR__EIM_WEIM_A_24 0x14c 0x42c 0x000 0x3 0x0
+#define MX50_PAD_DISP_WR__SDMA_DEBUG_PC_8 0x14c 0x42c 0x000 0x6 0x0
+#define MX50_PAD_DISP_WR__USBPHY1_AVALID 0x14c 0x42c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_RD_E 0x150 0x430 0x000 0x0 0x0
+#define MX50_PAD_DISP_RD__GPIO2_19 0x150 0x430 0x000 0x1 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_ENABLE 0x150 0x430 0x000 0x2 0x0
+#define MX50_PAD_DISP_RD__EIM_WEIM_A_25 0x150 0x430 0x000 0x3 0x0
+#define MX50_PAD_DISP_RD__SDMA_DEBUG_PC_9 0x150 0x430 0x000 0x6 0x0
+#define MX50_PAD_DISP_RD__USBPHY1_BVALID 0x150 0x430 0x000 0x7 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_RS 0x154 0x434 0x000 0x0 0x0
+#define MX50_PAD_DISP_RS__GPIO2_17 0x154 0x434 0x000 0x1 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_VSYNC 0x154 0x434 0x73c 0x2 0x1
+#define MX50_PAD_DISP_RS__EIM_WEIM_A_26 0x154 0x434 0x000 0x3 0x0
+#define MX50_PAD_DISP_RS__SDMA_DEBUG_PC_10 0x154 0x434 0x000 0x6 0x0
+#define MX50_PAD_DISP_RS__USBPHY1_ENDSESSION 0x154 0x434 0x000 0x7 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_CS 0x158 0x438 0x000 0x0 0x0
+#define MX50_PAD_DISP_CS__GPIO2_21 0x158 0x438 0x000 0x1 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_HSYNC 0x158 0x438 0x6f8 0x2 0x1
+#define MX50_PAD_DISP_CS__EIM_WEIM_A_27 0x158 0x438 0x000 0x3 0x0
+#define MX50_PAD_DISP_CS__EIM_WEIM_CS_3 0x158 0x438 0x000 0x4 0x0
+#define MX50_PAD_DISP_CS__SDMA_DEBUG_PC_11 0x158 0x438 0x000 0x6 0x0
+#define MX50_PAD_DISP_CS__USBPHY1_IDDIG 0x158 0x438 0x000 0x7 0x0
+#define MX50_PAD_DISP_BUSY__ELCDIF_BUSY 0x15c 0x43c 0x6f8 0x0 0x2
+#define MX50_PAD_DISP_BUSY__GPIO2_18 0x15c 0x43c 0x000 0x1 0x0
+#define MX50_PAD_DISP_BUSY__EIM_WEIM_CS_3 0x15c 0x43c 0x000 0x4 0x0
+#define MX50_PAD_DISP_BUSY__SDMA_DEBUG_PC_12 0x15c 0x43c 0x000 0x6 0x0
+#define MX50_PAD_DISP_BUSY__USBPHY2_HOSTDISCONNECT 0x15c 0x43c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RESET__ELCDIF_RESET 0x160 0x440 0x000 0x0 0x0
+#define MX50_PAD_DISP_RESET__GPIO2_20 0x160 0x440 0x000 0x1 0x0
+#define MX50_PAD_DISP_RESET__EIM_WEIM_CS_3 0x160 0x440 0x000 0x4 0x0
+#define MX50_PAD_DISP_RESET__SDMA_DEBUG_PC_13 0x160 0x440 0x000 0x6 0x0
+#define MX50_PAD_DISP_RESET__USBPHY2_BISTOK 0x160 0x440 0x000 0x7 0x0
+#define MX50_PAD_SD3_CMD__ESDHC3_CMD 0x164 0x444 0x000 0x0 0x0
+#define MX50_PAD_SD3_CMD__GPIO5_18 0x164 0x444 0x000 0x1 0x0
+#define MX50_PAD_SD3_CMD__EIM_NANDF_WRN 0x164 0x444 0x000 0x2 0x0
+#define MX50_PAD_SD3_CMD__SSP_CMD 0x164 0x444 0x000 0x3 0x0
+#define MX50_PAD_SD3_CLK__ESDHC3_CLK 0x168 0x448 0x000 0x0 0x0
+#define MX50_PAD_SD3_CLK__GPIO5_19 0x168 0x448 0x000 0x1 0x0
+#define MX50_PAD_SD3_CLK__EIM_NANDF_RDN 0x168 0x448 0x000 0x2 0x0
+#define MX50_PAD_SD3_CLK__SSP_CLK 0x168 0x448 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__ESDHC3_DAT0 0x16c 0x44c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D0__GPIO5_20 0x16c 0x44c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D0__EIM_NANDF_D_4 0x16c 0x44c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D0__SSP_D0 0x16c 0x44c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__CCM_PLL1_BYP 0x16c 0x44c 0x6dc 0x7 0x1
+#define MX50_PAD_SD3_D1__ESDHC3_DAT1 0x170 0x450 0x000 0x0 0x0
+#define MX50_PAD_SD3_D1__GPIO5_21 0x170 0x450 0x000 0x1 0x0
+#define MX50_PAD_SD3_D1__EIM_NANDF_D_5 0x170 0x450 0x000 0x2 0x0
+#define MX50_PAD_SD3_D1__SSP_D1 0x170 0x450 0x000 0x3 0x0
+#define MX50_PAD_SD3_D1__CCM_PLL2_BYP 0x170 0x450 0x000 0x7 0x0
+#define MX50_PAD_SD3_D2__ESDHC3_DAT2 0x174 0x454 0x000 0x0 0x0
+#define MX50_PAD_SD3_D2__GPIO5_22 0x174 0x454 0x000 0x1 0x0
+#define MX50_PAD_SD3_D2__EIM_NANDF_D_6 0x174 0x454 0x000 0x2 0x0
+#define MX50_PAD_SD3_D2__SSP_D2 0x174 0x454 0x000 0x3 0x0
+#define MX50_PAD_SD3_D2__CCM_PLL3_BYP 0x174 0x454 0x6e4 0x7 0x1
+#define MX50_PAD_SD3_D3__ESDHC3_DAT3 0x178 0x458 0x000 0x0 0x0
+#define MX50_PAD_SD3_D3__GPIO5_23 0x178 0x458 0x000 0x1 0x0
+#define MX50_PAD_SD3_D3__EIM_NANDF_D_7 0x178 0x458 0x000 0x2 0x0
+#define MX50_PAD_SD3_D3__SSP_D3 0x178 0x458 0x000 0x3 0x0
+#define MX50_PAD_SD3_D4__ESDHC3_DAT4 0x17c 0x45c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D4__GPIO5_24 0x17c 0x45c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D4__EIM_NANDF_D_0 0x17c 0x45c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D4__SSP_D4 0x17c 0x45c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D5__ESDHC3_DAT5 0x180 0x460 0x000 0x0 0x0
+#define MX50_PAD_SD3_D5__GPIO5_25 0x180 0x460 0x000 0x1 0x0
+#define MX50_PAD_SD3_D5__EIM_NANDF_D_1 0x180 0x460 0x000 0x2 0x0
+#define MX50_PAD_SD3_D5__SSP_D5 0x180 0x460 0x000 0x3 0x0
+#define MX50_PAD_SD3_D6__ESDHC3_DAT6 0x184 0x464 0x000 0x0 0x0
+#define MX50_PAD_SD3_D6__GPIO5_26 0x184 0x464 0x000 0x1 0x0
+#define MX50_PAD_SD3_D6__EIM_NANDF_D_2 0x184 0x464 0x000 0x2 0x0
+#define MX50_PAD_SD3_D6__SSP_D6 0x184 0x464 0x000 0x3 0x0
+#define MX50_PAD_SD3_D7__ESDHC3_DAT7 0x188 0x468 0x000 0x0 0x0
+#define MX50_PAD_SD3_D7__GPIO5_27 0x188 0x468 0x000 0x1 0x0
+#define MX50_PAD_SD3_D7__EIM_NANDF_D_3 0x188 0x468 0x000 0x2 0x0
+#define MX50_PAD_SD3_D7__SSP_D7 0x188 0x468 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC3_WP 0x18c 0x46C 0x000 0x0 0x0
+#define MX50_PAD_SD3_WP__GPIO5_28 0x18c 0x46C 0x000 0x1 0x0
+#define MX50_PAD_SD3_WP__EIM_NANDF_RESETN 0x18c 0x46C 0x000 0x2 0x0
+#define MX50_PAD_SD3_WP__SSP_CD 0x18c 0x46C 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC4_LCTL 0x18c 0x46C 0x000 0x4 0x0
+#define MX50_PAD_SD3_WP__EIM_WEIM_CS_3 0x18c 0x46C 0x000 0x5 0x0
+#define MX50_PAD_DISP_D8__ELCDIF_DAT_8 0x190 0x470 0x71c 0x0 0x0
+#define MX50_PAD_DISP_D8__GPIO2_8 0x190 0x470 0x000 0x1 0x0
+#define MX50_PAD_DISP_D8__EIM_NANDF_CLE 0x190 0x470 0x000 0x2 0x0
+#define MX50_PAD_DISP_D8__ESDHC1_LCTL 0x190 0x470 0x000 0x3 0x0
+#define MX50_PAD_DISP_D8__ESDHC4_CMD 0x190 0x470 0x74c 0x4 0x2
+#define MX50_PAD_DISP_D8__KPP_COL_4 0x190 0x470 0x790 0x5 0x1
+#define MX50_PAD_DISP_D8__FEC_TX_CLK 0x190 0x470 0x78c 0x6 0x1
+#define MX50_PAD_DISP_D8__USBPHY1_DATAOUT_0 0x190 0x470 0x000 0x7 0x0
+#define MX50_PAD_DISP_D9__ELCDIF_DAT_9 0x194 0x474 0x720 0x0 0x0
+#define MX50_PAD_DISP_D9__GPIO2_9 0x194 0x474 0x000 0x1 0x0
+#define MX50_PAD_DISP_D9__EIM_NANDF_ALE 0x194 0x474 0x000 0x2 0x0
+#define MX50_PAD_DISP_D9__ESDHC2_LCTL 0x194 0x474 0x000 0x3 0x0
+#define MX50_PAD_DISP_D9__ESDHC4_CLK 0x194 0x474 0x748 0x4 0x2
+#define MX50_PAD_DISP_D9__KPP_ROW_4 0x194 0x474 0x7a0 0x5 0x1
+#define MX50_PAD_DISP_D9__FEC_RX_ER 0x194 0x474 0x788 0x6 0x1
+#define MX50_PAD_DISP_D9__USBPHY1_DATAOUT_1 0x194 0x474 0x000 0x7 0x0
+#define MX50_PAD_DISP_D10__ELCDIF_DAT_10 0x198 0x478 0x724 0x0 0x0
+#define MX50_PAD_DISP_D10__GPIO2_10 0x198 0x478 0x000 0x1 0x0
+#define MX50_PAD_DISP_D10__EIM_NANDF_CEN_0 0x198 0x478 0x000 0x2 0x0
+#define MX50_PAD_DISP_D10__ESDHC3_LCTL 0x198 0x478 0x000 0x3 0x0
+#define MX50_PAD_DISP_D10__ESDHC4_DAT0 0x198 0x478 0x000 0x4 0x0
+#define MX50_PAD_DISP_D10__KPP_COL_5 0x198 0x478 0x794 0x5 0x1
+#define MX50_PAD_DISP_D10__FEC_RX_DV 0x198 0x478 0x784 0x6 0x1
+#define MX50_PAD_DISP_D10__USBPHY1_DATAOUT_2 0x198 0x478 0x000 0x7 0x0
+#define MX50_PAD_DISP_D11__ELCDIF_DAT_11 0x19c 0x47c 0x728 0x0 0x0
+#define MX50_PAD_DISP_D11__GPIO2_11 0x19c 0x47c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D11__EIM_NANDF_CEN_1 0x19c 0x47c 0x000 0x2 0x0
+#define MX50_PAD_DISP_D11__ESDHC4_DAT1 0x19c 0x47c 0x754 0x4 0x1
+#define MX50_PAD_DISP_D11__KPP_ROW_5 0x19c 0x47c 0x7a4 0x5 0x1
+#define MX50_PAD_DISP_D11__FEC_RDATA_1 0x19c 0x47c 0x77c 0x6 0x1
+#define MX50_PAD_DISP_D11__USBPHY1_DATAOUT_3 0x19c 0x47c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D12__ELCDIF_DAT_12 0x1a0 0x480 0x72c 0x0 0x0
+#define MX50_PAD_DISP_D12__GPIO2_12 0x1a0 0x480 0x000 0x1 0x0
+#define MX50_PAD_DISP_D12__EIM_NANDF_CEN_2 0x1a0 0x480 0x000 0x2 0x0
+#define MX50_PAD_DISP_D12__ESDHC1_CD 0x1a0 0x480 0x000 0x3 0x0
+#define MX50_PAD_DISP_D12__ESDHC4_DAT2 0x1a0 0x480 0x758 0x4 0x1
+#define MX50_PAD_DISP_D12__KPP_COL_6 0x1a0 0x480 0x798 0x5 0x1
+#define MX50_PAD_DISP_D12__FEC_RDATA_0 0x1a0 0x480 0x778 0x6 0x1
+#define MX50_PAD_DISP_D12__USBPHY1_DATAOUT_4 0x1a0 0x480 0x000 0x7 0x0
+#define MX50_PAD_DISP_D13__ELCDIF_DAT_13 0x1a4 0x484 0x730 0x0 0x0
+#define MX50_PAD_DISP_D13__GPIO2_13 0x1a4 0x484 0x000 0x1 0x0
+#define MX50_PAD_DISP_D13__EIM_NANDF_CEN_3 0x1a4 0x484 0x000 0x2 0x0
+#define MX50_PAD_DISP_D13__ESDHC3_CD 0x1a4 0x484 0x000 0x3 0x0
+#define MX50_PAD_DISP_D13__ESDHC4_DAT3 0x1a4 0x484 0x75c 0x4 0x1
+#define MX50_PAD_DISP_D13__KPP_ROW_6 0x1a4 0x484 0x7a8 0x5 0x1
+#define MX50_PAD_DISP_D13__FEC_TX_EN 0x1a4 0x484 0x000 0x6 0x0
+#define MX50_PAD_DISP_D13__USBPHY1_DATAOUT_5 0x1a4 0x484 0x000 0x7 0x0
+#define MX50_PAD_DISP_D14__ELCDIF_DAT_14 0x1a8 0x488 0x734 0x0 0x0
+#define MX50_PAD_DISP_D14__GPIO2_14 0x1a8 0x488 0x000 0x1 0x0
+#define MX50_PAD_DISP_D14__EIM_NANDF_READY0 0x1a8 0x488 0x7b4 0x2 0x1
+#define MX50_PAD_DISP_D14__ESDHC1_WP 0x1a8 0x488 0x000 0x3 0x0
+#define MX50_PAD_DISP_D14__ESDHC4_WP 0x1a8 0x488 0x000 0x4 0x0
+#define MX50_PAD_DISP_D14__KPP_COL_7 0x1a8 0x488 0x79c 0x5 0x1
+#define MX50_PAD_DISP_D14__FEC_TDATA_1 0x1a8 0x488 0x000 0x6 0x0
+#define MX50_PAD_DISP_D14__USBPHY1_DATAOUT_6 0x1a8 0x488 0x000 0x7 0x0
+#define MX50_PAD_DISP_D15__ELCDIF_DAT_15 0x1ac 0x48c 0x738 0x0 0x0
+#define MX50_PAD_DISP_D15__GPIO2_15 0x1ac 0x48c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D15__EIM_NANDF_DQS 0x1ac 0x48c 0x7b0 0x2 0x1
+#define MX50_PAD_DISP_D15__ESDHC3_RST 0x1ac 0x48c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D15__ESDHC4_CD 0x1ac 0x48c 0x000 0x4 0x0
+#define MX50_PAD_DISP_D15__KPP_ROW_7 0x1ac 0x48c 0x7ac 0x5 0x1
+#define MX50_PAD_DISP_D15__FEC_TDATA_0 0x1ac 0x48c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D15__USBPHY1_DATAOUT_7 0x1ac 0x48c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D0__EPDC_SDDO_0 0x1b0 0x54c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D0__GPIO3_0 0x1b0 0x54c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D0__EIM_WEIM_D_0 0x1b0 0x54c 0x7ec 0x2 0x1
+#define MX50_PAD_EPDC_D0__ELCDIF_RS 0x1b0 0x54c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D0__ELCDIF_DOTCLK 0x1b0 0x54c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D0__SDMA_DEBUG_EVT_CHN_LINES_0 0x1b0 0x54c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D0__USBPHY2_DATAOUT_0 0x1b0 0x54c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D1__EPDC_SDDO_1 0x1b4 0x550 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D1__GPIO3_1 0x1b4 0x550 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D1__EIM_WEIM_D_1 0x1b4 0x550 0x7f0 0x2 0x1
+#define MX50_PAD_EPDC_D1__ELCDIF_CS 0x1b4 0x550 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D1__ELCDIF_ENABLE 0x1b4 0x550 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D1__SDMA_DEBUG_EVT_CHN_LINES_1 0x1b4 0x550 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D1__USBPHY2_DATAOUT_1 0x1b4 0x550 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D2__EPDC_SDDO_2 0x1b8 0x554 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D2__GPIO3_2 0x1b8 0x554 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D2__EIM_WEIM_D_2 0x1b8 0x554 0x7f4 0x2 0x1
+#define MX50_PAD_EPDC_D2__ELCDIF_WR_RWN 0x1b8 0x554 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC 0x1b8 0x554 0x73c 0x4 0x2
+#define MX50_PAD_EPDC_D2__SDMA_DEBUG_EVT_CHN_LINES_2 0x1b8 0x554 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D2__USBPHY2_DATAOUT_2 0x1b8 0x554 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D3__EPDC_SDDO_3 0x1bc 0x558 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D3__GPIO3_3 0x1bc 0x558 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D3__EIM_WEIM_D_3 0x1bc 0x558 0x7f8 0x2 0x1
+#define MX50_PAD_EPDC_D3__ELCDIF_RD_E 0x1bc 0x558 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC 0x1bc 0x558 0x6f8 0x4 0x3
+#define MX50_PAD_EPDC_D3__SDMA_DEBUG_EVT_CHN_LINES_3 0x1bc 0x558 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D3__USBPHY2_DATAOUT_3 0x1bc 0x558 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D4__EPDC_SDDO_4 0x1c0 0x55c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D4__GPIO3_4 0x1c0 0x55c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D4__EIM_WEIM_D_4 0x1c0 0x55c 0x7fc 0x2 0x1
+#define MX50_PAD_EPDC_D4__SDMA_DEBUG_EVT_CHN_LINES_4 0x1c0 0x55c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D4__USBPHY2_DATAOUT_4 0x1c0 0x55c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D5__EPDC_SDDO_5 0x1c4 0x560 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D5__GPIO3_5 0x1c4 0x560 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D5__EIM_WEIM_D_5 0x1c4 0x560 0x800 0x2 0x1
+#define MX50_PAD_EPDC_D5__SDMA_DEBUG_EVT_CHN_LINES_5 0x1c4 0x560 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D5__USBPHY2_DATAOUT_5 0x1c4 0x560 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D6__EPDC_SDDO_6 0x1c8 0x564 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D6__GPIO3_6 0x1c8 0x564 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D6__EIM_WEIM_D_6 0x1c8 0x564 0x804 0x2 0x1
+#define MX50_PAD_EPDC_D6__SDMA_DEBUG_EVT_CHN_LINES_6 0x1c8 0x564 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D6__USBPHY2_DATAOUT_6 0x1c8 0x564 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D7__EPDC_SDDO_7 0x1cc 0x568 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D7__GPIO3_7 0x1cc 0x568 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D7__EIM_WEIM_D_7 0x1cc 0x568 0x808 0x2 0x1
+#define MX50_PAD_EPDC_D7__SDMA_DEBUG_EVT_CHN_LINES_7 0x1cc 0x568 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D7__USBPHY2_DATAOUT_7 0x1cc 0x568 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D8__EPDC_SDDO_8 0x1d0 0x56c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D8__GPIO3_8 0x1d0 0x56c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D8__EIM_WEIM_D_8 0x1d0 0x56c 0x80c 0x2 0x2
+#define MX50_PAD_EPDC_D8__ELCDIF_DAT_24 0x1d0 0x56c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D8__SDMA_DEBUG_MATCHED_DMBUS 0x1d0 0x56c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D8__USBPHY2_VSTATUS_0 0x1d0 0x56c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D9__EPDC_SDDO_9 0x1d4 0x570 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D9__GPIO3_9 0x1d4 0x570 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D9__EIM_WEIM_D_9 0x1d4 0x570 0x810 0x2 0x2
+#define MX50_PAD_EPDC_D9__ELCDIF_DAT_25 0x1d4 0x570 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D9__SDMA_DEBUG_EVENT_CHANNEL_SEL 0x1d4 0x570 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D9__USBPHY2_VSTATUS_1 0x1d4 0x570 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D10__EPDC_SDDO_10 0x1d8 0x574 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D10__GPIO3_10 0x1d8 0x574 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D10__EIM_WEIM_D_10 0x1d8 0x574 0x814 0x2 0x2
+#define MX50_PAD_EPDC_D10__ELCDIF_DAT_26 0x1d8 0x574 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D10__SDMA_DEBUG_EVENT_CHANNEL_0 0x1d8 0x574 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D10__USBPHY2_VSTATUS_2 0x1d8 0x574 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D11__EPDC_SDDO_11 0x1dc 0x578 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D11__GPIO3_11 0x1dc 0x578 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D11__EIM_WEIM_D_11 0x1dc 0x578 0x818 0x2 0x2
+#define MX50_PAD_EPDC_D11__ELCDIF_DAT_27 0x1dc 0x578 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D11__SDMA_DEBUG_EVENT_CHANNEL_1 0x1dc 0x578 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D11__USBPHY2_VSTATUS_3 0x1dc 0x578 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D12__EPDC_SDDO_12 0x1e0 0x57c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D12__GPIO3_12 0x1e0 0x57c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D12__EIM_WEIM_D_12 0x1e0 0x57c 0x81c 0x2 0x1
+#define MX50_PAD_EPDC_D12__ELCDIF_DAT_28 0x1e0 0x57c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D12__SDMA_DEBUG_EVENT_CHANNEL_2 0x1e0 0x57c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D12__USBPHY2_VSTATUS_4 0x1e0 0x57c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D13__EPDC_SDDO_13 0x1e4 0x580 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D13__GPIO3_13 0x1e4 0x580 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D13__EIM_WEIM_D_13 0x1e4 0x580 0x820 0x2 0x1
+#define MX50_PAD_EPDC_D13__ELCDIF_DAT_29 0x1e4 0x580 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D13__SDMA_DEBUG_EVENT_CHANNEL_3 0x1e4 0x580 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D13__USBPHY2_VSTATUS_5 0x1e4 0x580 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D14__EPDC_SDDO_14 0x1e8 0x584 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D14__GPIO3_14 0x1e8 0x584 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D14__EIM_WEIM_D_14 0x1e8 0x584 0x824 0x2 0x1
+#define MX50_PAD_EPDC_D14__ELCDIF_DAT_30 0x1e8 0x584 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D14__AUDMUX_AUD6_TXD 0x1e8 0x584 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D14__SDMA_DEBUG_EVENT_CHANNEL_4 0x1e8 0x584 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D14__USBPHY2_VSTATUS_6 0x1e8 0x584 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D15__EPDC_SDDO_15 0x1ec 0x588 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D15__GPIO3_15 0x1ec 0x588 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D15__EIM_WEIM_D_15 0x1ec 0x588 0x828 0x2 0x1
+#define MX50_PAD_EPDC_D15__ELCDIF_DAT_31 0x1ec 0x588 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D15__AUDMUX_AUD6_TXC 0x1ec 0x588 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D15__SDMA_DEBUG_EVENT_CHANNEL_5 0x1ec 0x588 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D15__USBPHY2_VSTATUS_7 0x1ec 0x588 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK 0x1f0 0x58c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDCLK__GPIO3_16 0x1f0 0x58c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDCLK__EIM_WEIM_D_16 0x1f0 0x58c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDCLK__ELCDIF_DAT_16 0x1f0 0x58c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDCLK__AUDMUX_AUD6_TXFS 0x1f0 0x58c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDCLK__SDMA_DEBUG_CORE_STATE_0 0x1f0 0x58c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDCLK__USBPHY2_BISTOK 0x1f0 0x58c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDSP__EPCD_GDSP 0x1f4 0x590 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDSP__GPIO3_17 0x1f4 0x590 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDSP__EIM_WEIM_D_17 0x1f4 0x590 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDSP__ELCDIF_DAT_17 0x1f4 0x590 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDSP__AUDMUX_AUD6_RXD 0x1f4 0x590 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDSP__SDMA_DEBUG_CORE_STATE_1 0x1f4 0x590 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDSP__USBPHY2_BVALID 0x1f4 0x590 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDOE__EPCD_GDOE 0x1f8 0x594 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDOE__GPIO3_18 0x1f8 0x594 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDOE__EIM_WEIM_D_18 0x1f8 0x594 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDOE__ELCDIF_DAT_18 0x1f8 0x594 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDOE__AUDMUX_AUD6_RXC 0x1f8 0x594 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDOE__SDMA_DEBUG_CORE_STATE_2 0x1f8 0x594 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDOE__USBPHY2_ENDSESSION 0x1f8 0x594 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDRL__EPCD_GDRL 0x1fc 0x598 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDRL__GPIO3_19 0x1fc 0x598 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDRL__EIM_WEIM_D_19 0x1f8 0x598 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDRL__ELCDIF_DAT_19 0x1fc 0x598 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDRL__AUDMUX_AUD6_RXFS 0x1fc 0x598 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDRL__SDMA_DEBUG_CORE_STATE_3 0x1fc 0x598 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDRL__USBPHY2_IDDIG 0x1fc 0x598 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLK__EPCD_SDCLK 0x200 0x59c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLK__GPIO3_20 0x200 0x59c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLK__EIM_WEIM_D_20 0x200 0x59c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLK__ELCDIF_DAT_20 0x200 0x59c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDCLK__AUDMUX_AUD5_TXD 0x200 0x59c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLK__SDMA_DEBUG_BUS_DEVICE_0 0x200 0x59c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLK__USBPHY2_HOSTDISCONNECT 0x200 0x59c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOEZ__EPCD_SDOEZ 0x204 0x5a0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOEZ__GPIO3_21 0x204 0x5a0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOEZ__EIM_WEIM_D_21 0x204 0x5a0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOEZ__ELCDIF_DAT_21 0x204 0x5a0 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOEZ__AUDMUX_AUD5_TXC 0x204 0x5a0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOEZ__SDMA_DEBUG_BUS_DEVICE_1 0x204 0x5a0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOEZ__USBPHY2_TXREADY 0x204 0x5a0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOED__EPCD_SDOED 0x208 0x5a4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOED__GPIO3_22 0x208 0x5a4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOED__EIM_WEIM_D_22 0x208 0x5a4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOED__ELCDIF_DAT_22 0x208 0x5a4 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOED__AUDMUX_AUD5_TXFS 0x208 0x5a4 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOED__SDMA_DEBUG_BUS_DEVICE_2 0x208 0x5a4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOED__USBPHY2_RXVALID 0x208 0x5a4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOE__EPCD_SDOE 0x20c 0x5a8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOE__GPIO3_23 0x20c 0x5a8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOE__EIM_WEIM_D_23 0x20c 0x5a8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOE__ELCDIF_DAT_23 0x20c 0x5a8 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOE__AUDMUX_AUD5_RXD 0x20c 0x5a8 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOE__SDMA_DEBUG_BUS_DEVICE_3 0x20c 0x5a8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOE__USBPHY2_RXACTIVE 0x20c 0x5a8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDLE__EPCD_SDLE 0x210 0x5ac 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDLE__GPIO3_24 0x210 0x5ac 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDLE__EIM_WEIM_D_24 0x210 0x5ac 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDLE__ELCDIF_DAT_8 0x210 0x5ac 0x71c 0x3 0x1
+#define MX50_PAD_EPDC_SDLE__AUDMUX_AUD5_RXC 0x210 0x5ac 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDLE__SDMA_DEBUG_BUS_DEVICE_4 0x210 0x5ac 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDLE__USBPHY2_RXERROR 0x210 0x5ac 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLKN__EPCD_SDCLKN 0x214 0x5b0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLKN__GPIO3_25 0x214 0x5b0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLKN__EIM_WEIM_D_25 0x214 0x5b0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLKN__ELCDIF_DAT_9 0x214 0x5b0 0x720 0x3 0x1
+#define MX50_PAD_EPDC_SDCLKN__AUDMUX_AUD5_RXFS 0x214 0x5b0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLKN__SDMA_DEBUG_BUS_ERROR 0x214 0x5b0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLKN__USBPHY2_SIECLOCK 0x214 0x5b0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDSHR__EPCD_SDSHR 0x218 0x5b4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDSHR__GPIO3_26 0x218 0x5b4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDSHR__EIM_WEIM_D_26 0x218 0x5b4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDSHR__ELCDIF_DAT_10 0x218 0x5b4 0x724 0x3 0x1
+#define MX50_PAD_EPDC_SDSHR__AUDMUX_AUD4_TXD 0x218 0x5b4 0x6c8 0x4 0x1
+#define MX50_PAD_EPDC_SDSHR__SDMA_DEBUG_BUS_RWB 0x218 0x5b4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDSHR__USBPHY2_LINESTATE_0 0x218 0x5b4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCOM__EPCD_PWRCOM 0x21c 0x5b8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCOM__GPIO3_27 0x21c 0x5b8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCOM__EIM_WEIM_D_27 0x21c 0x5b8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCOM__ELCDIF_DAT_11 0x21c 0x5b8 0x728 0x3 0x1
+#define MX50_PAD_EPDC_PWRCOM__AUDMUX_AUD4_TXC 0x21c 0x5b8 0x6d4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCOM__SDMA_DEBUG_CORE_RUN 0x21c 0x5b8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCOM__USBPHY2_LINESTATE_1 0x21c 0x5b8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EPCD_PWRSTAT 0x220 0x5bc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRSTAT__GPIO3_28 0x220 0x5bc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EIM_WEIM_D_28 0x220 0x5bc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_DAT_12 0x220 0x5bc 0x72c 0x3 0x1
+#define MX50_PAD_EPDC_PWRSTAT__AUDMUX_AUD4_TXFS 0x220 0x5bc 0x6d8 0x4 0x1
+#define MX50_PAD_EPDC_PWRSTAT__SDMA_DEBUG_MODE 0x220 0x5bc 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRSTAT__USBPHY2_VBUSVALID 0x220 0x5bc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EPCD_PWRCTRL0 0x224 0x5c0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__GPIO3_29 0x224 0x5c0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EIM_WEIM_D_29 0x224 0x5c0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_DAT_13 0x224 0x5c0 0x730 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__AUDMUX_AUD4_RXD 0x224 0x5c0 0x6c4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__SDMA_DEBUG_RTBUFFER_WRITE 0x224 0x5c0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__USBPHY2_AVALID 0x224 0x5c0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EPCD_PWRCTRL1 0x228 0x5c4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__GPIO3_30 0x228 0x5c4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EIM_WEIM_D_30 0x228 0x5c4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_DAT_14 0x228 0x5c4 0x734 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__AUDMUX_AUD4_RXC 0x228 0x5c4 0x6cc 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__SDMA_DEBUG_YIELD 0x228 0x5c4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__USBPHY1_ONBIST 0x228 0x5c4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EPCD_PWRCTRL2 0x22c 0x5c8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__GPIO3_31 0x22c 0x5c8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EIM_WEIM_D_31 0x22c 0x5c8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_DAT_15 0x22c 0x5c8 0x738 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__AUDMUX_AUD4_RXFS 0x22c 0x5c8 0x6d0 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT_EVENT_0 0x22c 0x5c8 0x7b8 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__USBPHY2_ONBIST 0x22c 0x5c8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EPCD_PWRCTRL3 0x230 0x5cc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__GPIO4_20 0x230 0x5cc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EIM_WEIM_EB_2 0x230 0x5cc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT_EVENT_1 0x230 0x5cc 0x7bc 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL3__USBPHY1_BISTOK 0x230 0x5cc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM0__EPCD_VCOM_0 0x234 0x5d0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM0__GPIO4_21 0x234 0x5d0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM0__EIM_WEIM_EB_3 0x234 0x5d0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_VCOM0__USBPHY2_BISTOK 0x234 0x5d0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM1__EPCD_VCOM_1 0x238 0x5d4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM1__GPIO4_22 0x238 0x5d4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM1__EIM_WEIM_CS_3 0x238 0x5d4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_BDR0__EPCD_BDR_0 0x23c 0x5d8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR0__GPIO4_23 0x23c 0x5d8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR0__ELCDIF_DAT_7 0x23c 0x5d8 0x718 0x3 0x1
+#define MX50_PAD_EPDC_BDR1__EPCD_BDR_1 0x240 0x5dc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR1__GPIO4_24 0x240 0x5dc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR1__ELCDIF_DAT_6 0x240 0x5dc 0x714 0x3 0x1
+#define MX50_PAD_EPDC_SDCE0__EPCD_SDCE_0 0x244 0x5e0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE0__GPIO4_25 0x244 0x5e0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE0__ELCDIF_DAT_5 0x244 0x5e0 0x710 0x3 0x1
+#define MX50_PAD_EPDC_SDCE1__EPCD_SDCE_1 0x248 0x5e4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE1__GPIO4_26 0x248 0x5e4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE1__ELCDIF_DAT_4 0x248 0x5e4 0x70c 0x3 0x0
+#define MX50_PAD_EPDC_SDCE2__EPCD_SDCE_2 0x24c 0x5e8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE2__GPIO4_27 0x24c 0x5e8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT_3 0x24c 0x5e8 0x708 0x3 0x1
+#define MX50_PAD_EPDC_SDCE3__EPCD_SDCE_3 0x250 0x5ec 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE3__GPIO4_28 0x250 0x5ec 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE3__ELCDIF_DAT_2 0x250 0x5ec 0x704 0x3 0x1
+#define MX50_PAD_EPDC_SDCE4__EPCD_SDCE_4 0x254 0x5f0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE4__GPIO4_29 0x254 0x5f0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE4__ELCDIF_DAT_1 0x254 0x5f0 0x700 0x3 0x1
+#define MX50_PAD_EPDC_SDCE5__EPCD_SDCE_5 0x258 0x5f4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE5__GPIO4_30 0x258 0x5f4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE5__ELCDIF_DAT_0 0x258 0x5f4 0x6fc 0x3 0x1
+#define MX50_PAD_EIM_DA0__EIM_WEIM_A_0 0x25c 0x5f8 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA0__GPIO1_0 0x25c 0x5f8 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA0__KPP_COL_4 0x25c 0x5f8 0x790 0x3 0x2
+#define MX50_PAD_EIM_DA0__TPIU_TRACE_0 0x25c 0x5f8 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA0__SRC_BT_CFG1_0 0x25c 0x5f8 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA1__EIM_WEIM_A_1 0x260 0x5fc 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA1__GPIO1_1 0x260 0x5fc 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA1__KPP_ROW_4 0x260 0x5fc 0x7a0 0x3 0x2
+#define MX50_PAD_EIM_DA1__TPIU_TRACE_1 0x260 0x5fc 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA1__SRC_BT_CFG1_1 0x260 0x5fc 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA2__EIM_WEIM_A_2 0x264 0x600 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA2__GPIO1_2 0x264 0x600 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA2__KPP_COL_5 0x264 0x600 0x794 0x3 0x2
+#define MX50_PAD_EIM_DA2__TPIU_TRACE_2 0x264 0x600 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA2__SRC_BT_CFG1_2 0x264 0x600 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA3__EIM_WEIM_A_3 0x268 0x604 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA3__GPIO1_3 0x268 0x604 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA3__KPP_ROW_5 0x268 0x604 0x7a4 0x3 0x2
+#define MX50_PAD_EIM_DA3__TPIU_TRACE_3 0x268 0x604 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA3__SRC_BT_CFG1_3 0x268 0x604 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA4__EIM_WEIM_A_4 0x26c 0x608 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA4__GPIO1_4 0x26c 0x608 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA4__KPP_COL_6 0x26c 0x608 0x798 0x3 0x2
+#define MX50_PAD_EIM_DA4__TPIU_TRACE_4 0x26c 0x608 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA4__SRC_BT_CFG1_4 0x26c 0x608 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA5__EIM_WEIM_A_5 0x270 0x60c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA5__GPIO1_5 0x270 0x60c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA5__KPP_ROW_6 0x270 0x60c 0x7a8 0x3 0x2
+#define MX50_PAD_EIM_DA5__TPIU_TRACE_5 0x270 0x60c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA5__SRC_BT_CFG1_5 0x270 0x60c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA6__EIM_WEIM_A_6 0x274 0x610 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA6__GPIO1_6 0x274 0x610 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA6__KPP_COL_7 0x274 0x610 0x79c 0x3 0x2
+#define MX50_PAD_EIM_DA6__TPIU_TRACE_6 0x274 0x610 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA6__SRC_BT_CFG1_6 0x274 0x610 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA7__EIM_WEIM_A_7 0x278 0x614 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA7__GPIO1_7 0x278 0x614 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA7__KPP_ROW_7 0x278 0x614 0x7ac 0x3 0x2
+#define MX50_PAD_EIM_DA7__TPIU_TRACE_7 0x278 0x614 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA7__SRC_BT_CFG1_7 0x278 0x614 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA8__EIM_WEIM_A_8 0x27c 0x618 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA8__GPIO1_8 0x27c 0x618 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA8__EIM_NANDF_CLE 0x27c 0x618 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA8__TPIU_TRACE_8 0x27c 0x618 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA8__SRC_BT_CFG2_0 0x27c 0x618 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA9__EIM_WEIM_A_9 0x280 0x61c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA9__GPIO1_9 0x280 0x61c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA9__EIM_NANDF_ALE 0x280 0x61c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA9__TPIU_TRACE_9 0x280 0x61c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA9__SRC_BT_CFG2_1 0x280 0x61c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA10__EIM_WEIM_A_10 0x284 0x620 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA10__GPIO1_10 0x284 0x620 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA10__EIM_NANDF_CEN_0 0x284 0x620 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA10__TPIU_TRACE_10 0x284 0x620 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA10__SRC_BT_CFG2_2 0x284 0x620 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA11__EIM_WEIM_A_11 0x288 0x624 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA11__GPIO1_11 0x288 0x624 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA11__EIM_NANDF_CEN_1 0x288 0x624 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA11__TPIU_TRACE_11 0x288 0x624 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA11__SRC_BT_CFG2_3 0x288 0x624 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA12__EIM_WEIM_A_12 0x28c 0x628 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA12__GPIO1_12 0x28c 0x628 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA12__EIM_NANDF_CEN_2 0x28c 0x628 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA12__EPDC_SDCE_6 0x28c 0x628 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA12__TPIU_TRACE_12 0x28c 0x628 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA12__SRC_BT_CFG2_4 0x28c 0x628 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA13__EIM_WEIM_A_13 0x290 0x62c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA13__GPIO1_13 0x290 0x62c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA13__EIM_NANDF_CEN_3 0x290 0x62c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA13__EPDC_SDCE_7 0x290 0x62c 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA13__TPIU_TRACE_13 0x290 0x62c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA13__SRC_BT_CFG2_5 0x290 0x62c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA14__EIM_WEIM_A_14 0x294 0x630 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA14__GPIO1_14 0x294 0x630 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA14__EIM_NANDF_READY0 0x294 0x630 0x7b4 0x2 0x2
+#define MX50_PAD_EIM_DA14__EPDC_SDCE_8 0x294 0x630 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA14__TPIU_TRACE_14 0x294 0x630 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA14__SRC_BT_CFG2_6 0x294 0x630 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA15__EIM_WEIM_A_15 0x298 0x634 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA15__GPIO1_15 0x298 0x634 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA15__EIM_NANDF_DQS 0x298 0x634 0x7b0 0x2 0x2
+#define MX50_PAD_EIM_DA15__EPDC_SDCE_9 0x298 0x634 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA15__TPIU_TRACE_15 0x298 0x634 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA15__SRC_BT_CFG2_7 0x298 0x634 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_CS_2 0x29c 0x638 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS2__GPIO1_16 0x29c 0x638 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_A_27 0x29c 0x638 0x000 0x2 0x0
+#define MX50_PAD_EIM_CS2__TPIU_TRCLK 0x29c 0x638 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS2__SRC_BT_CFG3_0 0x29c 0x638 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS1__EIM_WEIM_CS_1 0x2a0 0x63c 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS1__GPIO1_17 0x2a0 0x63c 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS1__TPIU_TRCTL 0x2a0 0x63c 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS1__SRC_BT_CFG3_1 0x2a0 0x63c 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS0__EIM_WEIM_CS_0 0x2a4 0x640 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS0__GPIO1_18 0x2a4 0x640 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS0__SRC_BT_CFG3_2 0x2a4 0x640 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB0__EIM_WEIM_EB_0 0x2a8 0x644 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB0__GPIO1_19 0x2a8 0x644 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB0__SRC_BT_CFG3_3 0x2a8 0x644 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB1__EIM_WEIM_EB_1 0x2ac 0x648 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB1__GPIO1_20 0x2ac 0x648 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB1__SRC_BT_CFG3_4 0x2ac 0x648 0x000 0x7 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_WAIT 0x2b0 0x64c 0x000 0x0 0x0
+#define MX50_PAD_EIM_WAIT__GPIO1_21 0x2b0 0x64c 0x000 0x1 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_DTACK_B 0x2b0 0x64c 0x000 0x2 0x0
+#define MX50_PAD_EIM_WAIT__SRC_BT_CFG3_5 0x2b0 0x64c 0x000 0x7 0x0
+#define MX50_PAD_EIM_BCLK__EIM_WEIM_BCLK 0x2b4 0x650 0x000 0x0 0x0
+#define MX50_PAD_EIM_BCLK__GPIO1_22 0x2b4 0x650 0x000 0x1 0x0
+#define MX50_PAD_EIM_BCLK__SRC_BT_CFG3_6 0x2b4 0x650 0x000 0x7 0x0
+#define MX50_PAD_EIM_RDY__EIM_WEIM_RDY 0x2b8 0x654 0x000 0x0 0x0
+#define MX50_PAD_EIM_RDY__GPIO1_23 0x2b8 0x654 0x000 0x1 0x0
+#define MX50_PAD_EIM_RDY__SRC_BT_CFG3_7 0x2b8 0x654 0x000 0x7 0x0
+#define MX50_PAD_EIM_OE__EIM_WEIM_OE 0x2bc 0x658 0x000 0x0 0x0
+#define MX50_PAD_EIM_OE__GPIO1_24 0x2bc 0x658 0x000 0x1 0x0
+#define MX50_PAD_EIM_OE__INT_BOOT 0x2bc 0x658 0x000 0x7 0x0
+#define MX50_PAD_EIM_RW__EIM_WEIM_RW 0x2c0 0x65c 0x000 0x0 0x0
+#define MX50_PAD_EIM_RW__GPIO1_25 0x2c0 0x65c 0x000 0x1 0x0
+#define MX50_PAD_EIM_RW__SYSTEM_RST 0x2c0 0x65c 0x000 0x7 0x0
+#define MX50_PAD_EIM_LBA__EIM_WEIM_LBA 0x2c4 0x660 0x000 0x0 0x0
+#define MX50_PAD_EIM_LBA__GPIO1_26 0x2c4 0x660 0x000 0x1 0x0
+#define MX50_PAD_EIM_LBA__TESTER_ACK 0x2c4 0x660 0x000 0x7 0x0
+#define MX50_PAD_EIM_CRE__EIM_WEIM_CRE 0x2c8 0x664 0x000 0x0 0x0
+#define MX50_PAD_EIM_CRE__GPIO1_27 0x2c8 0x664 0x000 0x1 0x0
+
+#endif /* __DTS_IMX50_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
new file mode 100644
index 0000000..0c75fe3
--- /dev/null
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -0,0 +1,478 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx50-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a8";
+ reg = <0x0>;
+ };
+ };
+
+ tzic: tz-interrupt-controller@0fffc000 {
+ compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x0fffc000 0x4000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ckil {
+ compatible = "fsl,imx-ckil", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ckih1 {
+ compatible = "fsl,imx-ckih1", "fixed-clock";
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ compatible = "fsl,imx-ckih2", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&tzic>;
+ ranges;
+
+ aips@50000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x10000000>;
+ ranges;
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ esdhc1: esdhc@50004000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1>;
+ clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc2: esdhc@50008000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50008000 0x4000>;
+ interrupts = <2>;
+ clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <33>;
+ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+ <&clks IMX5_CLK_UART3_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi1: ecspi@50010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+ reg = <0x50010000 0x4000>;
+ interrupts = <36>;
+ clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ssi2: ssi@50014000 {
+ compatible = "fsl,imx50-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
+ reg = <0x50014000 0x4000>;
+ interrupts = <30>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ esdhc3: esdhc@50020000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50020000 0x4000>;
+ interrupts = <3>;
+ clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc4: esdhc@50024000 {
+ compatible = "fsl,imx50-esdhc";
+ reg = <0x50024000 0x4000>;
+ interrupts = <4>;
+ clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+ };
+
+ usbotg: usb@53f80000 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80000 0x0200>;
+ interrupts = <18>;
+ clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+ status = "disabled";
+ };
+
+ usbh1: usb@53f80200 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80200 0x0200>;
+ interrupts = <14>;
+ clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+ status = "disabled";
+ };
+
+ usbh2: usb@53f80400 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80400 0x0200>;
+ interrupts = <16>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ status = "disabled";
+ };
+
+ usbh3: usb@53f80600 {
+ compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+ reg = <0x53f80600 0x0200>;
+ interrupts = <17>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@53f84000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@53f88000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f88000 0x4000>;
+ interrupts = <52 53>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@53f8c000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f8c000 0x4000>;
+ interrupts = <54 55>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@53f90000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53f90000 0x4000>;
+ interrupts = <56 57>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wdog1: wdog@53f98000 {
+ compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <58>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ };
+
+ gpt: timer@53fa0000 {
+ compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
+ reg = <0x53fa0000 0x4000>;
+ interrupts = <39>;
+ clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+ <&clks IMX5_CLK_GPT_HF_GATE>;
+ clock-names = "ipg", "per";
+ };
+
+ iomuxc: iomuxc@53fa8000 {
+ compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
+ reg = <0x53fa8000 0x4000>;
+ };
+
+ gpr: iomuxc-gpr@53fa8000 {
+ compatible = "fsl,imx50-iomuxc-gpr", "syscon";
+ reg = <0x53fa8000 0xc>;
+ };
+
+ pwm1: pwm@53fb4000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb4000 0x4000>;
+ clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
+ clock-names = "ipg", "per";
+ interrupts = <61>;
+ };
+
+ pwm2: pwm@53fb8000 {
+ #pwm-cells = <2>;
+ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+ reg = <0x53fb8000 0x4000>;
+ clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
+ clock-names = "ipg", "per";
+ interrupts = <94>;
+ };
+
+ uart1: serial@53fbc000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <31>;
+ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+ <&clks IMX5_CLK_UART1_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@53fc0000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <32>;
+ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+ <&clks IMX5_CLK_UART2_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ src: src@53fd0000 {
+ compatible = "fsl,imx50-src", "fsl,imx51-src";
+ reg = <0x53fd0000 0x4000>;
+ #reset-cells = <1>;
+ };
+
+ clks: ccm@53fd4000{
+ compatible = "fsl,imx50-ccm";
+ reg = <0x53fd4000 0x4000>;
+ interrupts = <0 71 0x04 0 72 0x04>;
+ #clock-cells = <1>;
+ };
+
+ gpio5: gpio@53fdc000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53fdc000 0x4000>;
+ interrupts = <103 104>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@53fe0000 {
+ compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+ reg = <0x53fe0000 0x4000>;
+ interrupts = <105 106>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c3: i2c@53fec000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+ reg = <0x53fec000 0x4000>;
+ interrupts = <64>;
+ clocks = <&clks IMX5_CLK_I2C3_GATE>;
+ status = "disabled";
+ };
+
+ uart4: serial@53ff0000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x53ff0000 0x4000>;
+ interrupts = <13>;
+ clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+ <&clks IMX5_CLK_UART4_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+ };
+
+ aips@60000000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x60000000 0x10000000>;
+ ranges;
+
+ uart5: serial@63f90000 {
+ compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+ reg = <0x63f90000 0x4000>;
+ interrupts = <86>;
+ clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+ <&clks IMX5_CLK_UART5_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ owire: owire@63fa4000 {
+ compatible = "fsl,imx50-owire", "fsl,imx21-owire";
+ reg = <0x63fa4000 0x4000>;
+ clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@63fac000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+ reg = <0x63fac000 0x4000>;
+ interrupts = <37>;
+ clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ sdma: sdma@63fb0000 {
+ compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
+ reg = <0x63fb0000 0x4000>;
+ interrupts = <6>;
+ clocks = <&clks IMX5_CLK_SDMA_GATE>,
+ <&clks IMX5_CLK_SDMA_GATE>;
+ clock-names = "ipg", "ahb";
+ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
+ };
+
+ cspi: cspi@63fc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
+ reg = <0x63fc0000 0x4000>;
+ interrupts = <38>;
+ clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c2: i2c@63fc4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+ reg = <0x63fc4000 0x4000>;
+ interrupts = <63>;
+ clocks = <&clks IMX5_CLK_I2C2_GATE>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@63fc8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+ reg = <0x63fc8000 0x4000>;
+ interrupts = <62>;
+ clocks = <&clks IMX5_CLK_I2C1_GATE>;
+ status = "disabled";
+ };
+
+ ssi1: ssi@63fcc000 {
+ compatible = "fsl,imx50-ssi", "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
+ reg = <0x63fcc000 0x4000>;
+ interrupts = <29>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ audmux: audmux@63fd0000 {
+ compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
+ reg = <0x63fd0000 0x4000>;
+ status = "disabled";
+ };
+
+ fec: ethernet@63fec000 {
+ compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+ reg = <0x63fec000 0x4000>;
+ interrupts = <87>;
+ clocks = <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
index b360699..e88b2a6 100644
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -34,13 +34,47 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_2>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "mii";
- phy-reset-gpios = <&gpio3 0 0>;
+ phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
phy-reset-duration = <1>;
status = "okay";
};
+&iomuxc {
+ imx51-apf51 {
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000
+ MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000
+ MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000
+ MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000
+ MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
+ MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000
+ MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000
+ MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000
+ MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000
+ MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000
+ MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000
+ MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000
+ MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000
+ MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
+ MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
+ >;
+ };
+ };
+};
+
&nfc {
nand-bus-width = <8>;
nand-ecc-mode = "hw";
@@ -50,6 +84,6 @@
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_2>;
+ pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 5a7f552..c29cfa9 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -21,7 +21,7 @@
crtcs = <&ipu 0>;
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+ pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
lw700 {
@@ -48,7 +48,7 @@
user-key {
label = "user";
- gpios = <&gpio1 3 0>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
linux,code = <256>; /* BTN_0 */
};
};
@@ -58,7 +58,7 @@
user {
label = "Heartbeat";
- gpios = <&gpio1 2 0>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
@@ -66,31 +66,33 @@
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+ <&gpio4 25 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&ecspi2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi2_1>;
+ pinctrl-0 = <&pinctrl_ecspi2>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio3 28 1>, <&gpio3 27 1>;
+ cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
+ <&gpio3 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- cd-gpios = <&gpio2 29 0>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
status = "okay";
};
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
+ pinctrl-0 = <&pinctrl_esdhc2>;
bus-width = <4>;
non-removable;
status = "okay";
@@ -98,7 +100,7 @@
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_2>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
@@ -106,7 +108,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx51-apf51dev {
pinctrl_hog: hoggrp {
fsl,pins = <
MX51_PAD_EIM_EB2__GPIO2_22 0x0C5
@@ -120,5 +122,81 @@
MX51_PAD_GPIO1_3__GPIO1_3 0x0C5
>;
};
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
+ MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
+ MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
+ MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
+ MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
+ MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
+ MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
+ MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
+ MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_ipu_disp1: ipudisp1grp {
+ fsl,pins = <
+ MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
+ MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
+ MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
+ MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
+ MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
+ MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
+ MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
+ MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
+ MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
+ MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
+ MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+ MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+ MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+ MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+ MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+ MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+ MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+ MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+ MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+ MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+ MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+ MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+ MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+ MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+ MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
+ MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
+ >;
+ };
};
};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index be1407c..ea5c67e 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -26,7 +26,7 @@
crtcs = <&ipu 0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp1_1>;
+ pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
native-mode = <&timing0>;
timing0: dvi {
@@ -48,7 +48,7 @@
crtcs = <&ipu 1>;
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+ pinctrl-0 = <&pinctrl_ipu_disp2>;
status = "disabled";
display-timings {
native-mode = <&timing1>;
@@ -75,7 +75,7 @@
power {
label = "Power Button";
- gpios = <&gpio2 21 0>;
+ gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
@@ -105,14 +105,14 @@
reg=<0>;
#clock-cells = <0>;
clock-frequency = <26000000>;
- gpios = <&gpio4 26 1>;
+ gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
};
};
};
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
fsl,cd-controller;
fsl,wp-controller;
status = "okay";
@@ -120,24 +120,25 @@
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
- cd-gpios = <&gpio1 6 0>;
- wp-gpios = <&gpio1 5 0>;
+ pinctrl-0 = <&pinctrl_esdhc2>;
+ cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1 &pinctrl_uart3_rtscts_1>;
+ pinctrl-0 = <&pinctrl_uart3>;
fsl,uart-has-rtscts;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+ <&gpio4 25 GPIO_ACTIVE_LOW>;
status = "okay";
pmic: mc13892@0 {
@@ -148,7 +149,7 @@
spi-cs-high;
reg = <0>;
interrupt-parent = <&gpio1>;
- interrupts = <8 0x4>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
regulators {
sw1_reg: sw1 {
@@ -267,7 +268,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx51-babbage {
pinctrl_hog: hoggrp {
fsl,pins = <
MX51_PAD_GPIO1_0__SD1_CD 0x20d5
@@ -280,25 +281,188 @@
MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
>;
};
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
+ MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
+ MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000
+ MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
+ MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
+ MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
+ MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
+ MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
+ MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000
+ MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000
+ MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000
+ MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000
+ MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000
+ MX51_PAD_EIM_CS5__FEC_CRS 0x80000000
+ MX51_PAD_NANDF_RB2__FEC_COL 0x80000000
+ MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000
+ MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000
+ MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000
+ MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000
+ MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000
+ MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000
+ MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000
+ MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000
+ MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000
+ MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
+ MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
+ MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_ipu_disp1: ipudisp1grp {
+ fsl,pins = <
+ MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
+ MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
+ MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
+ MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
+ MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
+ MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
+ MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
+ MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
+ MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
+ MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
+ MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
+ MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
+ MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
+ MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
+ MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
+ MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
+ MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
+ MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
+ MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
+ MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
+ MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
+ MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
+ MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
+ MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
+ MX51_PAD_DI1_PIN2__DI1_PIN2 0x5
+ MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
+ >;
+ };
+
+ pinctrl_ipu_disp2: ipudisp2grp {
+ fsl,pins = <
+ MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5
+ MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5
+ MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5
+ MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5
+ MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5
+ MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5
+ MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5
+ MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5
+ MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5
+ MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5
+ MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5
+ MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5
+ MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5
+ MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5
+ MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5
+ MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5
+ MX51_PAD_DI2_PIN2__DI2_PIN2 0x5
+ MX51_PAD_DI2_PIN3__DI2_PIN3 0x5
+ MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5
+ MX51_PAD_DI_GP4__DI2_PIN15 0x5
+ >;
+ };
+
+ pinctrl_kpp: kppgrp {
+ fsl,pins = <
+ MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
+ MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
+ MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
+ MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
+ MX51_PAD_KEY_COL0__KEY_COL0 0xe8
+ MX51_PAD_KEY_COL1__KEY_COL1 0xe8
+ MX51_PAD_KEY_COL2__KEY_COL2 0xe8
+ MX51_PAD_KEY_COL3__KEY_COL3 0xe8
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+ MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+ MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
+ MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
+ MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX51_PAD_EIM_D25__UART3_RXD 0x1c5
+ MX51_PAD_EIM_D26__UART3_TXD 0x1c5
+ MX51_PAD_EIM_D27__UART3_RTS 0x1c5
+ MX51_PAD_EIM_D24__UART3_CTS 0x1c5
+ >;
+ };
};
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1 &pinctrl_uart1_rtscts_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
fsl,uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
sgtl5000: codec@0a {
@@ -312,35 +476,39 @@
&audmux {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
+ pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <1>;
status = "okay";
};
&kpp {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_kpp_1>;
- linux,keymap = <0x00000067 /* KEY_UP */
- 0x0001006c /* KEY_DOWN */
- 0x00020072 /* KEY_VOLUMEDOWN */
- 0x00030066 /* KEY_HOME */
- 0x0100006a /* KEY_RIGHT */
- 0x01010069 /* KEY_LEFT */
- 0x0102001c /* KEY_ENTER */
- 0x01030073 /* KEY_VOLUMEUP */
- 0x02000040 /* KEY_F6 */
- 0x02010042 /* KEY_F8 */
- 0x02020043 /* KEY_F9 */
- 0x02030044 /* KEY_F10 */
- 0x0300003b /* KEY_F1 */
- 0x0301003c /* KEY_F2 */
- 0x0302003d /* KEY_F3 */
- 0x03030074>; /* KEY_POWER */
+ pinctrl-0 = <&pinctrl_kpp>;
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_UP)
+ MATRIX_KEY(0, 1, KEY_DOWN)
+ MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0, 3, KEY_HOME)
+ MATRIX_KEY(1, 0, KEY_RIGHT)
+ MATRIX_KEY(1, 1, KEY_LEFT)
+ MATRIX_KEY(1, 2, KEY_ENTER)
+ MATRIX_KEY(1, 3, KEY_VOLUMEUP)
+ MATRIX_KEY(2, 0, KEY_F6)
+ MATRIX_KEY(2, 1, KEY_F8)
+ MATRIX_KEY(2, 2, KEY_F9)
+ MATRIX_KEY(2, 3, KEY_F10)
+ MATRIX_KEY(3, 0, KEY_F1)
+ MATRIX_KEY(3, 1, KEY_F2)
+ MATRIX_KEY(3, 2, KEY_F3)
+ MATRIX_KEY(3, 3, KEY_POWER)
+ >;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
new file mode 100644
index 0000000..9b3acf6
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include "imx51.dtsi"
+
+/ {
+ model = "Eukrea CPUIMX51";
+ compatible = "eukrea,cpuimx51", "fsl,imx51";
+
+ memory {
+ reg = <0x90000000 0x10000000>; /* 256M */
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ imx51-eukrea {
+ pinctrl_tsc2007_1: tsc2007grp-1 {
+ fsl,pins = <
+ MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
+ MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000
+ MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000
+ MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000
+ MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000
+ MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
+ MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000
+ MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000
+ MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000
+ MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000
+ MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000
+ MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000
+ MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000
+ MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000
+ MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000
+ MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX51_PAD_SD2_CMD__I2C1_SCL 0x400001ed
+ MX51_PAD_SD2_CLK__I2C1_SDA 0x400001ed
+ >;
+ };
+ };
+};
+
+&nfc {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
new file mode 100644
index 0000000..5cec4f3
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -0,0 +1,175 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+/dts-v1/;
+#include "imx51-eukrea-cpuimx51.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Eukrea CPUIMX51";
+ compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys_1>;
+
+ button-1 {
+ label = "BP1";
+ gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+ linux,code = <256>;
+ gpio-key,wakeup;
+ linux,input-type = <1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioled>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sound {
+ compatible = "eukrea,asoc-tlv320";
+ eukrea,model = "imx51-eukrea-tlv320aic23";
+ ssi-controller = <&ssi2>;
+ fsl,mux-int-port = <2>;
+ fsl,mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
+ fsl,cd-controller;
+ status = "okay";
+};
+
+&i2c1 {
+ tlv320aic23: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ };
+};
+
+&iomuxc {
+ imx51-eukrea {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
+ MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
+ MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000
+ MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+ MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
+ MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart3_rtscts: uart3rtsctsgrp {
+ fsl,pins = <
+ MX51_PAD_KEY_COL4__UART3_RTS 0x1c5
+ MX51_PAD_KEY_COL5__UART3_CTS 0x1c5
+ >;
+ };
+
+ pinctrl_backlight_1: backlightgrp-1 {
+ fsl,pins = <
+ MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
+ >;
+ };
+
+ pinctrl_esdhc1_cd: esdhc1_cd {
+ fsl,pins = <
+ MX51_PAD_GPIO1_0__SD1_CD 0x20d5
+ >;
+ };
+
+ pinctrl_gpiokeys_1: gpiokeysgrp-1 {
+ fsl,pins = <
+ MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
+ >;
+ };
+
+ pinctrl_gpioled: gpioledgrp-1 {
+ fsl,pins = <
+ MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
+ >;
+ };
+
+ pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+ fsl,pins = <
+ MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
+ >;
+ };
+ };
+};
+
+&ssi2 {
+ codec-handle = <&tlv320aic23>;
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 4bcdd3a..e4b07d1 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -12,6 +12,10 @@
#include "skeleton.dtsi"
#include "imx51-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
aliases {
@@ -21,6 +25,10 @@
gpio3 = &gpio4;
i2c0 = &i2c1;
i2c1 = &i2c2;
+ mmc0 = &esdhc1;
+ mmc1 = &esdhc2;
+ mmc2 = &esdhc3;
+ mmc3 = &esdhc4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -64,18 +72,32 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0>;
- clock-latency = <61036>; /* two CLK32 periods */
- clocks = <&clks 24>;
+ clock-latency = <62500>;
+ clocks = <&clks IMX5_CLK_CPU_PODF>;
clock-names = "cpu";
operating-points = <
- /* kHz uV (No regulator support) */
- 160000 0
- 800000 0
+ 166000 1000000
+ 600000 1050000
+ 800000 1100000
>;
+ voltage-tolerance = <5>;
+ };
+ };
+
+ usbphy {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-bus";
+
+ usbphy0: usbphy@0 {
+ compatible = "usb-nop-xceiv";
+ reg = <0>;
+ clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+ clock-names = "main_clk";
};
};
@@ -96,7 +118,9 @@
compatible = "fsl,imx51-ipu";
reg = <0x40000000 0x20000000>;
interrupts = <11 10>;
- clocks = <&clks 59>, <&clks 110>, <&clks 61>;
+ clocks = <&clks IMX5_CLK_IPU_GATE>,
+ <&clks IMX5_CLK_IPU_DI0_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_GATE>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
};
@@ -119,7 +143,9 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70004000 0x4000>;
interrupts = <1>;
- clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+ clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
@@ -128,7 +154,9 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70008000 0x4000>;
interrupts = <2>;
- clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+ clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -138,7 +166,8 @@
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x7000c000 0x4000>;
interrupts = <33>;
- clocks = <&clks 32>, <&clks 33>;
+ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+ <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -149,7 +178,8 @@
compatible = "fsl,imx51-ecspi";
reg = <0x70010000 0x4000>;
interrupts = <36>;
- clocks = <&clks 51>, <&clks 52>;
+ clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -158,7 +188,7 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x70014000 0x4000>;
interrupts = <30>;
- clocks = <&clks 49>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
dmas = <&sdma 24 1 0>,
<&sdma 25 1 0>;
dma-names = "rx", "tx";
@@ -171,7 +201,9 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70020000 0x4000>;
interrupts = <3>;
- clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+ clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -181,25 +213,20 @@
compatible = "fsl,imx51-esdhc";
reg = <0x70024000 0x4000>;
interrupts = <4>;
- clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+ clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
};
- usbphy0: usbphy@0 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks 75>;
- clock-names = "main_clk";
- status = "okay";
- };
-
usbotg: usb@73f80000 {
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80000 0x0200>;
interrupts = <18>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
@@ -209,7 +236,7 @@
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80200 0x0200>;
interrupts = <14>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
@@ -218,7 +245,7 @@
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80400 0x0200>;
interrupts = <16>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
@@ -227,7 +254,7 @@
compatible = "fsl,imx51-usb", "fsl,imx27-usb";
reg = <0x73f80600 0x0200>;
interrupts = <17>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
};
@@ -236,7 +263,7 @@
#index-cells = <1>;
compatible = "fsl,imx51-usbmisc";
reg = <0x73f80800 0x200>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
};
gpio1: gpio@73f84000 {
@@ -283,7 +310,7 @@
compatible = "fsl,imx51-kpp", "fsl,imx21-kpp";
reg = <0x73f94000 0x4000>;
interrupts = <60>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
status = "disabled";
};
@@ -291,14 +318,14 @@
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f98000 0x4000>;
interrupts = <58>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
};
wdog2: wdog@73f9c000 {
compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
reg = <0x73f9c000 0x4000>;
interrupts = <59>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
status = "disabled";
};
@@ -306,7 +333,8 @@
compatible = "fsl,imx51-gpt", "fsl,imx31-gpt";
reg = <0x73fa0000 0x4000>;
interrupts = <39>;
- clocks = <&clks 36>, <&clks 41>;
+ clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+ <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per";
};
@@ -319,7 +347,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb4000 0x4000>;
- clocks = <&clks 37>, <&clks 38>;
+ clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <61>;
};
@@ -328,7 +357,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
reg = <0x73fb8000 0x4000>;
- clocks = <&clks 39>, <&clks 40>;
+ clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <94>;
};
@@ -337,7 +367,8 @@
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
- clocks = <&clks 28>, <&clks 29>;
+ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+ <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -346,7 +377,8 @@
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
- clocks = <&clks 30>, <&clks 31>;
+ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+ <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -376,14 +408,14 @@
compatible = "fsl,imx51-iim", "fsl,imx27-iim";
reg = <0x83f98000 0x4000>;
interrupts = <69>;
- clocks = <&clks 107>;
+ clocks = <&clks IMX5_CLK_IIM_GATE>;
};
owire: owire@83fa4000 {
compatible = "fsl,imx51-owire", "fsl,imx21-owire";
reg = <0x83fa4000 0x4000>;
interrupts = <88>;
- clocks = <&clks 159>;
+ clocks = <&clks IMX5_CLK_OWIRE_GATE>;
status = "disabled";
};
@@ -393,7 +425,8 @@
compatible = "fsl,imx51-ecspi";
reg = <0x83fac000 0x4000>;
interrupts = <37>;
- clocks = <&clks 53>, <&clks 54>;
+ clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -402,7 +435,8 @@
compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
reg = <0x83fb0000 0x4000>;
interrupts = <6>;
- clocks = <&clks 56>, <&clks 56>;
+ clocks = <&clks IMX5_CLK_SDMA_GATE>,
+ <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
@@ -414,7 +448,8 @@
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
reg = <0x83fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 55>;
+ clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -425,7 +460,7 @@
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc4000 0x4000>;
interrupts = <63>;
- clocks = <&clks 35>;
+ clocks = <&clks IMX5_CLK_I2C2_GATE>;
status = "disabled";
};
@@ -435,7 +470,7 @@
compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
reg = <0x83fc8000 0x4000>;
interrupts = <62>;
- clocks = <&clks 34>;
+ clocks = <&clks IMX5_CLK_I2C1_GATE>;
status = "disabled";
};
@@ -443,7 +478,7 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fcc000 0x4000>;
interrupts = <29>;
- clocks = <&clks 48>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
dmas = <&sdma 28 0 0>,
<&sdma 29 0 0>;
dma-names = "rx", "tx";
@@ -455,6 +490,8 @@
audmux: audmux@83fd0000 {
compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
reg = <0x83fd0000 0x4000>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ clock-names = "audmux";
status = "disabled";
};
@@ -463,7 +500,7 @@
#size-cells = <1>;
compatible = "fsl,imx51-weim";
reg = <0x83fda000 0x1000>;
- clocks = <&clks 57>;
+ clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>;
ranges = <
0 0 0xb0000000 0x08000000
1 0 0xb8000000 0x08000000
@@ -479,7 +516,7 @@
compatible = "fsl,imx51-nand";
reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
interrupts = <8>;
- clocks = <&clks 60>;
+ clocks = <&clks IMX5_CLK_NFC_GATE>;
status = "disabled";
};
@@ -487,7 +524,7 @@
compatible = "fsl,imx51-pata", "fsl,imx27-pata";
reg = <0x83fe0000 0x4000>;
interrupts = <70>;
- clocks = <&clks 172>;
+ clocks = <&clks IMX5_CLK_PATA_GATE>;
status = "disabled";
};
@@ -495,7 +532,7 @@
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fe8000 0x4000>;
interrupts = <96>;
- clocks = <&clks 50>;
+ clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
dmas = <&sdma 46 0 0>,
<&sdma 47 0 0>;
dma-names = "rx", "tx";
@@ -508,336 +545,12 @@
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;
- clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+ clocks = <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
};
};
};
-
-&iomuxc {
- audmux {
- pinctrl_audmux_1: audmuxgrp-1 {
- fsl,pins = <
- MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000
- MX51_PAD_AUD3_BB_RXD__AUD3_RXD 0x80000000
- MX51_PAD_AUD3_BB_CK__AUD3_TXC 0x80000000
- MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
- >;
- };
- };
-
- fec {
- pinctrl_fec_1: fecgrp-1 {
- fsl,pins = <
- MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000
- MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000
- MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000
- MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000
- MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000
- MX51_PAD_EIM_CS5__FEC_CRS 0x80000000
- MX51_PAD_NANDF_RB2__FEC_COL 0x80000000
- MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000
- MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000
- MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000
- MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000
- MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000
- MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000
- MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000
- MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000
- MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000
- MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000
- >;
- };
-
- pinctrl_fec_2: fecgrp-2 {
- fsl,pins = <
- MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000
- MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000
- MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000
- MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000
- MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
- MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000
- MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000
- MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000
- MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000
- MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000
- MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000
- MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000
- MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000
- MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000
- MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000
- MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000
- MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000
- MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
- >;
- };
- };
-
- ecspi1 {
- pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <
- MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
- MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
- MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
- >;
- };
- };
-
- ecspi2 {
- pinctrl_ecspi2_1: ecspi2grp-1 {
- fsl,pins = <
- MX51_PAD_NANDF_RB3__ECSPI2_MISO 0x185
- MX51_PAD_NANDF_D15__ECSPI2_MOSI 0x185
- MX51_PAD_NANDF_RB2__ECSPI2_SCLK 0x185
- >;
- };
- };
-
- esdhc1 {
- pinctrl_esdhc1_1: esdhc1grp-1 {
- fsl,pins = <
- MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
- MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
- MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
- MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
- MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
- MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
- >;
- };
- };
-
- esdhc2 {
- pinctrl_esdhc2_1: esdhc2grp-1 {
- fsl,pins = <
- MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
- MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
- MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
- MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
- MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
- MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
- >;
- };
- };
-
- i2c2 {
- pinctrl_i2c2_1: i2c2grp-1 {
- fsl,pins = <
- MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
- MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
- >;
- };
-
- pinctrl_i2c2_2: i2c2grp-2 {
- fsl,pins = <
- MX51_PAD_EIM_D27__I2C2_SCL 0x400001ed
- MX51_PAD_EIM_D24__I2C2_SDA 0x400001ed
- >;
- };
-
- pinctrl_i2c2_3: i2c2grp-3 {
- fsl,pins = <
- MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed
- MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed
- >;
- };
- };
-
- ipu_disp1 {
- pinctrl_ipu_disp1_1: ipudisp1grp-1 {
- fsl,pins = <
- MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
- MX51_PAD_DISP1_DAT1__DISP1_DAT1 0x5
- MX51_PAD_DISP1_DAT2__DISP1_DAT2 0x5
- MX51_PAD_DISP1_DAT3__DISP1_DAT3 0x5
- MX51_PAD_DISP1_DAT4__DISP1_DAT4 0x5
- MX51_PAD_DISP1_DAT5__DISP1_DAT5 0x5
- MX51_PAD_DISP1_DAT6__DISP1_DAT6 0x5
- MX51_PAD_DISP1_DAT7__DISP1_DAT7 0x5
- MX51_PAD_DISP1_DAT8__DISP1_DAT8 0x5
- MX51_PAD_DISP1_DAT9__DISP1_DAT9 0x5
- MX51_PAD_DISP1_DAT10__DISP1_DAT10 0x5
- MX51_PAD_DISP1_DAT11__DISP1_DAT11 0x5
- MX51_PAD_DISP1_DAT12__DISP1_DAT12 0x5
- MX51_PAD_DISP1_DAT13__DISP1_DAT13 0x5
- MX51_PAD_DISP1_DAT14__DISP1_DAT14 0x5
- MX51_PAD_DISP1_DAT15__DISP1_DAT15 0x5
- MX51_PAD_DISP1_DAT16__DISP1_DAT16 0x5
- MX51_PAD_DISP1_DAT17__DISP1_DAT17 0x5
- MX51_PAD_DISP1_DAT18__DISP1_DAT18 0x5
- MX51_PAD_DISP1_DAT19__DISP1_DAT19 0x5
- MX51_PAD_DISP1_DAT20__DISP1_DAT20 0x5
- MX51_PAD_DISP1_DAT21__DISP1_DAT21 0x5
- MX51_PAD_DISP1_DAT22__DISP1_DAT22 0x5
- MX51_PAD_DISP1_DAT23__DISP1_DAT23 0x5
- MX51_PAD_DI1_PIN2__DI1_PIN2 0x5 /* hsync */
- MX51_PAD_DI1_PIN3__DI1_PIN3 0x5 /* vsync */
- >;
- };
- };
-
- ipu_disp2 {
- pinctrl_ipu_disp2_1: ipudisp2grp-1 {
- fsl,pins = <
- MX51_PAD_DISP2_DAT0__DISP2_DAT0 0x5
- MX51_PAD_DISP2_DAT1__DISP2_DAT1 0x5
- MX51_PAD_DISP2_DAT2__DISP2_DAT2 0x5
- MX51_PAD_DISP2_DAT3__DISP2_DAT3 0x5
- MX51_PAD_DISP2_DAT4__DISP2_DAT4 0x5
- MX51_PAD_DISP2_DAT5__DISP2_DAT5 0x5
- MX51_PAD_DISP2_DAT6__DISP2_DAT6 0x5
- MX51_PAD_DISP2_DAT7__DISP2_DAT7 0x5
- MX51_PAD_DISP2_DAT8__DISP2_DAT8 0x5
- MX51_PAD_DISP2_DAT9__DISP2_DAT9 0x5
- MX51_PAD_DISP2_DAT10__DISP2_DAT10 0x5
- MX51_PAD_DISP2_DAT11__DISP2_DAT11 0x5
- MX51_PAD_DISP2_DAT12__DISP2_DAT12 0x5
- MX51_PAD_DISP2_DAT13__DISP2_DAT13 0x5
- MX51_PAD_DISP2_DAT14__DISP2_DAT14 0x5
- MX51_PAD_DISP2_DAT15__DISP2_DAT15 0x5
- MX51_PAD_DI2_PIN2__DI2_PIN2 0x5 /* hsync */
- MX51_PAD_DI2_PIN3__DI2_PIN3 0x5 /* vsync */
- MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK 0x5 /* CLK */
- MX51_PAD_DI_GP4__DI2_PIN15 0x5 /* DE */
- >;
- };
- };
-
- kpp {
- pinctrl_kpp_1: kppgrp-1 {
- fsl,pins = <
- MX51_PAD_KEY_ROW0__KEY_ROW0 0xe0
- MX51_PAD_KEY_ROW1__KEY_ROW1 0xe0
- MX51_PAD_KEY_ROW2__KEY_ROW2 0xe0
- MX51_PAD_KEY_ROW3__KEY_ROW3 0xe0
- MX51_PAD_KEY_COL0__KEY_COL0 0xe8
- MX51_PAD_KEY_COL1__KEY_COL1 0xe8
- MX51_PAD_KEY_COL2__KEY_COL2 0xe8
- MX51_PAD_KEY_COL3__KEY_COL3 0xe8
- >;
- };
- };
-
- pata {
- pinctrl_pata_1: patagrp-1 {
- fsl,pins = <
- MX51_PAD_NANDF_WE_B__PATA_DIOW 0x2004
- MX51_PAD_NANDF_RE_B__PATA_DIOR 0x2004
- MX51_PAD_NANDF_ALE__PATA_BUFFER_EN 0x2004
- MX51_PAD_NANDF_CLE__PATA_RESET_B 0x2004
- MX51_PAD_NANDF_WP_B__PATA_DMACK 0x2004
- MX51_PAD_NANDF_RB0__PATA_DMARQ 0x2004
- MX51_PAD_NANDF_RB1__PATA_IORDY 0x2004
- MX51_PAD_GPIO_NAND__PATA_INTRQ 0x2004
- MX51_PAD_NANDF_CS2__PATA_CS_0 0x2004
- MX51_PAD_NANDF_CS3__PATA_CS_1 0x2004
- MX51_PAD_NANDF_CS4__PATA_DA_0 0x2004
- MX51_PAD_NANDF_CS5__PATA_DA_1 0x2004
- MX51_PAD_NANDF_CS6__PATA_DA_2 0x2004
- MX51_PAD_NANDF_D15__PATA_DATA15 0x2004
- MX51_PAD_NANDF_D14__PATA_DATA14 0x2004
- MX51_PAD_NANDF_D13__PATA_DATA13 0x2004
- MX51_PAD_NANDF_D12__PATA_DATA12 0x2004
- MX51_PAD_NANDF_D11__PATA_DATA11 0x2004
- MX51_PAD_NANDF_D10__PATA_DATA10 0x2004
- MX51_PAD_NANDF_D9__PATA_DATA9 0x2004
- MX51_PAD_NANDF_D8__PATA_DATA8 0x2004
- MX51_PAD_NANDF_D7__PATA_DATA7 0x2004
- MX51_PAD_NANDF_D6__PATA_DATA6 0x2004
- MX51_PAD_NANDF_D5__PATA_DATA5 0x2004
- MX51_PAD_NANDF_D4__PATA_DATA4 0x2004
- MX51_PAD_NANDF_D3__PATA_DATA3 0x2004
- MX51_PAD_NANDF_D2__PATA_DATA2 0x2004
- MX51_PAD_NANDF_D1__PATA_DATA1 0x2004
- MX51_PAD_NANDF_D0__PATA_DATA0 0x2004
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
- MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
- MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
- >;
- };
-
- pinctrl_uart1_rtscts_1: uart1rtscts-1 {
- fsl,pins = <
- MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
- MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
- >;
- };
- };
-
- uart2 {
- pinctrl_uart2_1: uart2grp-1 {
- fsl,pins = <
- MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
- MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
- >;
- };
- };
-
- uart3 {
- pinctrl_uart3_1: uart3grp-1 {
- fsl,pins = <
- MX51_PAD_EIM_D25__UART3_RXD 0x1c5
- MX51_PAD_EIM_D26__UART3_TXD 0x1c5
- >;
- };
-
- pinctrl_uart3_rtscts_1: uart3rtscts-1 {
- fsl,pins = <
- MX51_PAD_EIM_D27__UART3_RTS 0x1c5
- MX51_PAD_EIM_D24__UART3_CTS 0x1c5
- >;
- };
-
- pinctrl_uart3_2: uart3grp-2 {
- fsl,pins = <
- MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
- MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
- >;
- };
- };
-
- usbh1 {
- pinctrl_usbh1_1: usbh1grp-1 {
- fsl,pins = <
- MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
- MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
- MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
- MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
- MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
- MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
- MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
- MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
- MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5
- MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5
- MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5
- MX51_PAD_USBH1_STP__USBH1_STP 0x1e5
- >;
- };
- };
-
- usbh2 {
- pinctrl_usbh2_1: usbh2grp-1 {
- fsl,pins = <
- MX51_PAD_EIM_D16__USBH2_DATA0 0x1e5
- MX51_PAD_EIM_D17__USBH2_DATA1 0x1e5
- MX51_PAD_EIM_D18__USBH2_DATA2 0x1e5
- MX51_PAD_EIM_D19__USBH2_DATA3 0x1e5
- MX51_PAD_EIM_D20__USBH2_DATA4 0x1e5
- MX51_PAD_EIM_D21__USBH2_DATA5 0x1e5
- MX51_PAD_EIM_D22__USBH2_DATA6 0x1e5
- MX51_PAD_EIM_D23__USBH2_DATA7 0x1e5
- MX51_PAD_EIM_A24__USBH2_CLK 0x1e5
- MX51_PAD_EIM_A25__USBH2_DIR 0x1e5
- MX51_PAD_EIM_A27__USBH2_NXT 0x1e5
- MX51_PAD_EIM_A26__USBH2_STP 0x1e5
- >;
- };
- };
-};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 174f869..e9337ad 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -49,9 +49,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -99,7 +102,7 @@
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_2>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
@@ -109,7 +112,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx53-ard {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_GPIO_1__GPIO1_1 0x80000000
@@ -148,11 +151,33 @@
MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 0x80000000
>;
};
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
};
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
deleted file mode 100644
index 801fda7..0000000
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53.dtsi"
-
-/ {
- model = "Freescale i.MX53 Evaluation Kit";
- compatible = "fsl,imx53-evk", "fsl,imx53";
-
- memory {
- reg = <0x70000000 0x80000000>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- green {
- label = "Heartbeat";
- gpios = <&gpio7 7 0>;
- linux,default-trigger = "heartbeat";
- };
- };
-};
-
-&esdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- cd-gpios = <&gpio3 13 0>;
- wp-gpios = <&gpio3 14 0>;
- status = "okay";
-};
-
-&ecspi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
- fsl,spi-num-chipselects = <2>;
- cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
- status = "okay";
-
- flash: at45db321d@1 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
- spi-max-frequency = <25000000>;
- reg = <1>;
-
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0x3c0000>;
- };
- };
-};
-
-&esdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
- cd-gpios = <&gpio3 11 0>;
- wp-gpios = <&gpio3 12 0>;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX53_PAD_EIM_EB2__GPIO2_30 0x80000000
- MX53_PAD_EIM_D19__GPIO3_19 0x80000000
- MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
- MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
- MX53_PAD_EIM_DA13__GPIO3_13 0x80000000
- MX53_PAD_EIM_DA14__GPIO3_14 0x80000000
- MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
- MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
- >;
- };
- };
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- pmic: mc13892@08 {
- compatible = "fsl,mc13892", "fsl,mc13xxx";
- reg = <0x08>;
- };
-
- codec: sgtl5000@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- };
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "rmii";
- phy-reset-gpios = <&gpio7 6 0>;
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index 7d304d0..7100d08 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -26,7 +26,7 @@
crtcs = <&ipu 1>;
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp2_1>;
+ pinctrl-0 = <&pinctrl_ipu_disp1>;
display-timings {
800x480p60 {
@@ -51,6 +51,7 @@
pwms = <&pwm1 0 3000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
+ power-supply = <®_backlight>;
};
leds {
@@ -73,14 +74,37 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p2v: 3p2v {
+ reg_3p2v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P2V";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
};
+
+
+ reg_backlight: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "lcd-supply";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+
+ reg_usbh1_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 2 0>;
+ enable-active-low;
+ };
};
sound {
@@ -102,25 +126,25 @@
&audmux {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_2>;
+ pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_3>;
+ pinctrl-0 = <&pinctrl_can1>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can2_1>;
+ pinctrl-0 = <&pinctrl_can2>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
@@ -128,14 +152,14 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_2>;
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
sgtl5000: codec@0a {
@@ -143,13 +167,13 @@
reg = <0x0a>;
VDDA-supply = <®_3p2v>;
VDDIO-supply = <®_3p2v>;
- clocks = <&clks 150>;
+ clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
};
};
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_2>;
+ pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <400000>;
status = "okay";
@@ -193,7 +217,7 @@
&i2c3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_1>;
+ pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
@@ -201,14 +225,14 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx53-m53evk {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
- MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
-
+ MX53_PAD_GPIO_2__GPIO1_2 0x80000000
+ MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000
>;
};
@@ -218,12 +242,168 @@
MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000
>;
};
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000
+ MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000
+ MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000
+ MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000
+ MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
+ MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
+ MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000
+ MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
+ MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_ipu_disp1: ipudisp1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5
+ MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5
+ MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5
+ MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5
+ MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5
+ MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5
+ MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5
+ MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5
+ MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5
+ MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5
+ MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5
+ MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5
+ MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5
+ MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5
+ MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5
+ MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5
+ MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5
+ MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5
+ MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5
+ MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5
+ MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5
+ MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5
+ MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5
+ MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5
+ MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5
+ MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5
+ MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5
+ MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5
+ MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5
+ MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5
+ MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5
+ MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5
+ >;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <
+ MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
+ MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
+ MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
+ MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
+ MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
+ MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
+ MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
+ MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
+ MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
+ MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
+ MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
+ MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
+ MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
+ MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
+ MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
+ >;
+ };
};
};
&nfc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand_1>;
+ pinctrl-0 = <&pinctrl_nand>;
nand-bus-width = <8>;
nand-ecc-mode = "hw";
status = "okay";
@@ -231,7 +411,11 @@
&pwm1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1_1>;
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&sata {
status = "okay";
};
@@ -242,18 +426,29 @@
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usbh1_vbus>;
+ phy_type = "utmi";
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "peripheral";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index a630902..0358366 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -17,14 +17,6 @@
model = "TQ MBa53 starter kit";
compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
- reg_backlight: fixed@0 {
- compatible = "regulator-fixed";
- regulator-name = "lcd-supply";
- gpio = <&gpio2 5 0>;
- startup-delay-us = <5000>;
- enable-active-low;
- };
-
backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 50000>;
@@ -43,12 +35,28 @@
status = "disabled";
};
- reg_3p2v: 3p2v {
- compatible = "regulator-fixed";
- regulator-name = "3P2V";
- regulator-min-microvolt = <3200000>;
- regulator-max-microvolt = <3200000>;
- regulator-always-on;
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_backlight: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "lcd-supply";
+ gpio = <&gpio2 5 0>;
+ startup-delay-us = <5000>;
+ enable-active-low;
+ };
+
+ reg_3p2v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
};
sound {
@@ -148,14 +156,14 @@
&audmux {
status = "okay";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
+ pinctrl-0 = <&pinctrl_audmux>;
};
&i2c2 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- clocks = <&clks 150>;
+ clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
VDDA-supply = <®_3p2v>;
VDDIO-supply = <®_3p2v>;
};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
new file mode 100644
index 0000000..2dca98b
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -0,0 +1,336 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+ memory {
+ reg = <0x70000000 0x40000000>;
+ };
+
+ display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ crtcs = <&ipu 0>;
+ interface-pix-fmt = "rgb565";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_disp0>;
+ status = "disabled";
+ display-timings {
+ claawvga {
+ native-mode;
+ clock-frequency = <27000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <40>;
+ hfront-porch = <60>;
+ vback-porch = <10>;
+ vfront-porch = <10>;
+ hsync-len = <20>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio1 8 0>;
+ linux,code = <116>; /* KEY_POWER */
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio2 14 0>;
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ gpio-key,wakeup;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio2 15 0>;
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_gpio7_7>;
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio7 7 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p2v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+
+ reg_usb_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 8 0>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx53-qsb-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx53-qsb-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <5>;
+ };
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ status = "okay";
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&esdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3>;
+ cd-gpios = <&gpio3 11 0>;
+ wp-gpios = <&gpio3 12 0>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-qsb {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
+ MX53_PAD_GPIO_8__GPIO1_8 0x80000000
+ MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
+ MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
+ MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
+ MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
+ MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
+ MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
+ MX53_PAD_GPIO_16__GPIO7_11 0x80000000
+ >;
+ };
+
+ led_pin_gpio7_7: led_gpio7_7@0 {
+ fsl,pins = <
+ MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc3: esdhc3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
+ MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
+ MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
+ MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
+ MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_ipu_disp0: ipudisp0grp {
+ fsl,pins = <
+ MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
+ MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
+ MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
+ MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
+ MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
+ MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
+ MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
+ MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
+ MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
+ MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
+ MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
+ MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
+ MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
+ MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
+ MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
+ MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
+ MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
+ MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
+ MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
+ MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
+ MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
+ MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
+ MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
+ MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
+ MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
+ MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
+ MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
+ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p2v>;
+ VDDIO-supply = <®_3p2v>;
+ clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 6 0>;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&vpu {
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_vbus>;
+ phy_type = "utmi";
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 91a5935..dec4b07 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -11,193 +11,14 @@
*/
/dts-v1/;
-#include "imx53.dtsi"
+#include "imx53-qsb-common.dtsi"
/ {
model = "Freescale i.MX53 Quick Start Board";
compatible = "fsl,imx53-qsb", "fsl,imx53";
-
- memory {
- reg = <0x70000000 0x40000000>;
- };
-
- display@di0 {
- compatible = "fsl,imx-parallel-display";
- crtcs = <&ipu 0>;
- interface-pix-fmt = "rgb565";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu_disp0_1>;
- status = "disabled";
- display-timings {
- claawvga {
- native-mode;
- clock-frequency = <27000000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <40>;
- hfront-porch = <60>;
- vback-porch = <10>;
- vfront-porch = <10>;
- hsync-len = <20>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- power {
- label = "Power Button";
- gpios = <&gpio1 8 0>;
- linux,code = <116>; /* KEY_POWER */
- };
-
- volume-up {
- label = "Volume Up";
- gpios = <&gpio2 14 0>;
- linux,code = <115>; /* KEY_VOLUMEUP */
- gpio-key,wakeup;
- };
-
- volume-down {
- label = "Volume Down";
- gpios = <&gpio2 15 0>;
- linux,code = <114>; /* KEY_VOLUMEDOWN */
- gpio-key,wakeup;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pin_gpio7_7>;
-
- user {
- label = "Heartbeat";
- gpios = <&gpio7 7 0>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- regulators {
- compatible = "simple-bus";
-
- reg_3p2v: 3p2v {
- compatible = "regulator-fixed";
- regulator-name = "3P2V";
- regulator-min-microvolt = <3200000>;
- regulator-max-microvolt = <3200000>;
- regulator-always-on;
- };
-
- reg_usb_vbus: usb_vbus {
- compatible = "regulator-fixed";
- regulator-name = "usb_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio7 8 0>;
- enable-active-high;
- };
- };
-
- sound {
- compatible = "fsl,imx53-qsb-sgtl5000",
- "fsl,imx-audio-sgtl5000";
- model = "imx53-qsb-sgtl5000";
- ssi-controller = <&ssi2>;
- audio-codec = <&sgtl5000>;
- audio-routing =
- "MIC_IN", "Mic Jack",
- "Mic Jack", "Mic Bias",
- "Headphone Jack", "HP_OUT";
- mux-int-port = <2>;
- mux-ext-port = <5>;
- };
-};
-
-&esdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
- status = "okay";
-};
-
-&ssi2 {
- fsl,mode = "i2s-slave";
- status = "okay";
-};
-
-&esdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
- cd-gpios = <&gpio3 11 0>;
- wp-gpios = <&gpio3 12 0>;
- bus-width = <8>;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
- MX53_PAD_GPIO_8__GPIO1_8 0x80000000
- MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
- MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
- MX53_PAD_EIM_DA11__GPIO3_11 0x80000000
- MX53_PAD_EIM_DA12__GPIO3_12 0x80000000
- MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
- MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
- MX53_PAD_GPIO_16__GPIO7_11 0x80000000
- >;
- };
-
- led_pin_gpio7_7: led_gpio7_7@0 {
- fsl,pins = <
- MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
- >;
- };
- };
-
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
- status = "okay";
-
- sgtl5000: codec@0a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- VDDA-supply = <®_3p2v>;
- VDDIO-supply = <®_3p2v>;
- clocks = <&clks 150>;
- };
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
- status = "okay";
-
- accelerometer: mma8450@1c {
- compatible = "fsl,mma8450";
- reg = <0x1c>;
- };
-
pmic: dialog@48 {
compatible = "dlg,da9053-aa", "dlg,da9052";
reg = <0x48>;
@@ -292,32 +113,3 @@
};
};
};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "okay";
-};
-
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
- phy-mode = "rmii";
- phy-reset-gpios = <&gpio7 6 0>;
- status = "okay";
-};
-
-&vpu {
- status = "okay";
-};
-
-&usbh1 {
- vbus-supply = <®_usb_vbus>;
- phy_type = "utmi";
- status = "okay";
-};
-
-&usbotg {
- dr_mode = "peripheral";
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
new file mode 100644
index 0000000..f1bbf9a
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -0,0 +1,158 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx53-qsb-common.dtsi"
+
+/ {
+ model = "Freescale i.MX53 Quick Start-R Board";
+ compatible = "fsl,imx53-qsrb", "fsl,imx53";
+};
+
+&iomuxc {
+ i2c1 {
+ /* open drain */
+ pinctrl_i2c1_qsrb: i2c1grp-1 {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec
+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec
+ >;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_qsrb>;
+ status = "okay";
+
+ pmic: mc34708@8 {
+ compatible = "fsl,mc34708";
+ reg = <0x08>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <23 0x8>;
+ regulators {
+ sw1_reg: sw1a {
+ regulator-name = "SW1";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1437500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw1b_reg: sw1b {
+ regulator-name = "SW1B";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1437500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-name = "SW2";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1437500>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-name = "SW3";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <1425000>;
+ regulator-boot-on;
+ };
+
+ sw4a_reg: sw4a {
+ regulator-name = "SW4A";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4b_reg: sw4b {
+ regulator-name = "SW4B";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw5_reg: sw5 {
+ regulator-name = "SW5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-name = "SWBST";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vpll_reg: vpll {
+ regulator-name = "VPLL";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ vrefddr_reg: vrefddr {
+ regulator-name = "VREFDDR";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vusb_reg: vusb {
+ regulator-name = "VUSB";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vusb2_reg: vusb2 {
+ regulator-name = "VUSB2";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdac_reg: vdac {
+ regulator-name = "VDAC";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2775000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-name = "VGEN1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-name = "VGEN2";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index a9b6e10..5ec1590 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -40,7 +40,7 @@
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio4 11 0>;
status = "okay";
@@ -48,21 +48,21 @@
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
+ pinctrl-0 = <&pinctrl_esdhc2>;
non-removable;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
+ pinctrl-0 = <&pinctrl_uart3>;
fsl,uart-has-rtscts;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
@@ -95,7 +95,7 @@
&esdhc3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
+ pinctrl-0 = <&pinctrl_esdhc3>;
non-removable;
status = "okay";
};
@@ -104,7 +104,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx53-smd {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
@@ -116,24 +116,121 @@
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
>;
};
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
+ MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
+ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc3: esdhc3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
+ MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
+ MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
+ MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
+ MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
+ >;
+ };
};
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
codec: sgtl5000@0a {
@@ -154,7 +251,7 @@
&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
accelerometer: mma8450@1c {
@@ -175,7 +272,7 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index abd72af..4f1f0e2 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -22,9 +22,12 @@
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -35,8 +38,8 @@
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>,
- <&pinctrl_tqma53_esdhc2_2>;
+ pinctrl-0 = <&pinctrl_esdhc2>,
+ <&pinctrl_esdhc2_cdwp>;
vmmc-supply = <®_3p3v>;
wp-gpios = <&gpio1 2 0>;
cd-gpios = <&gpio1 4 0>;
@@ -45,13 +48,13 @@
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_2>;
+ pinctrl-0 = <&pinctrl_uart3>;
status = "disabled";
};
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <4>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
<&gpio3 24 0>, <&gpio3 25 0>;
@@ -60,7 +63,7 @@
&esdhc3 { /* EMMC */
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
+ pinctrl-0 = <&pinctrl_esdhc3>;
vmmc-supply = <®_3p3v>;
non-removable;
bus-width = <8>;
@@ -71,27 +74,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- esdhc2_2 {
- pinctrl_tqma53_esdhc2_2: esdhc2-tqma53-grp2 {
- fsl,pins = <
- MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */
- MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */
- >;
- };
- };
-
- i2s {
- pinctrl_i2s_1: i2s-grp1 {
- fsl,pins = <
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 /* I2S_SCLK */
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 /* I2S_DOUT */
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 /* I2S_DIN */
- >;
- };
- };
-
- hog {
+ imx53-tqma53 {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
@@ -107,43 +90,165 @@
MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 /* LCD_CONTRAST */
>;
};
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000
+ MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
+ MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_cspi: cspigrp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5
+ MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5
+ MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
+ MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
+ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc2_cdwp: esdhc2cdwp {
+ fsl,pins = <
+ MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */
+ MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */
+ >;
+ };
+
+ pinctrl_esdhc3: esdhc3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
+ MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
+ MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
+ MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
+ MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
+ MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ >;
+ };
};
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>;
+ pinctrl-0 = <&pinctrl_uart1>;
fsl,uart-has-rtscts;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
+ pinctrl-0 = <&pinctrl_uart2>;
status = "disabled";
};
&can1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_2>;
+ pinctrl-0 = <&pinctrl_can1>;
status = "disabled";
};
&can2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can2_1>;
+ pinctrl-0 = <&pinctrl_can2>;
status = "disabled";
};
&i2c3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_1>;
+ pinctrl-0 = <&pinctrl_i2c3>;
status = "disabled";
};
&cspi {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_cspi_1>;
+ pinctrl-0 = <&pinctrl_cspi>;
fsl,spi-num-chipselects = <3>;
cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
<&gpio1 21 0>;
@@ -152,7 +257,7 @@
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
pmic: mc34708@8 {
@@ -177,7 +282,7 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
new file mode 100644
index 0000000..0217dde3
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -0,0 +1,315 @@
+/*
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Ka-Ro electronics TX53 module (LCD)";
+ compatible = "karo,tx53", "fsl,imx53";
+
+ aliases {
+ display = &display;
+ };
+
+ soc {
+ display: display@di0 {
+ compatible = "fsl,imx-parallel-display";
+ crtcs = <&ipu 0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgb24_vga1>;
+ status = "okay";
+
+ display-timings {
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hsync-len = <96>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vsync-len = <2>;
+ vfront-porch = <12>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETV570 {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <114>;
+ hsync-len = <30>;
+ hfront-porch = <16>;
+ vback-porch = <32>;
+ vsync-len = <3>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0350 {
+ clock-frequency = <6413760>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <34>;
+ hsync-len = <34>;
+ hfront-porch = <20>;
+ vback-porch = <15>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0430 {
+ clock-frequency = <9009000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <2>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ vfront-porch = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ ET0500 {
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0700 { /* same as ET0500 */
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETQ570 {
+ clock-frequency = <6596040>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <38>;
+ hsync-len = <30>;
+ hfront-porch = <30>;
+ vback-porch = <16>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ power-supply = <®_3v3>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <50>;
+ };
+
+ regulators {
+ reg_lcd_pwr: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "LCD POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reg_lcd_reset: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "LCD RESET";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_2v5>;
+ VDDIO-supply = <®_3v3>;
+ clocks = <&mclk>;
+ };
+
+ polytouch: edt-ft5x06@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 0>;
+ reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ touchscreen: tsc2007@48 {
+ compatible = "ti,tsc2007";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc2007>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <26 0>;
+ gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ ti,x-plate-ohms = <660>;
+ linux,wakeup;
+ };
+};
+
+&iomuxc {
+ imx53-tx53-x03x {
+ pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
+ fsl,pins = <
+ MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
+ MX53_PAD_EIM_A16__GPIO2_22 0x04 /* Reset */
+ MX53_PAD_EIM_A17__GPIO2_21 0x04 /* Wake */
+ >;
+ };
+
+ pinctrl_kpp: kppgrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
+ MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
+ MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
+ MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
+ MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
+ MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
+ MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
+ MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
+ >;
+ };
+
+ pinctrl_rgb24_vga1: rgb24-vgagrp1 {
+ fsl,pins = <
+ MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
+ MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
+ MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
+ MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
+ MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
+ MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
+ MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
+ MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
+ MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
+ MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
+ MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
+ MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
+ MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
+ MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
+ MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
+ MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
+ MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
+ MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
+ MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
+ MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
+ MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
+ MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
+ MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
+ MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
+ MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
+ MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
+ MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
+ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
+ >;
+ };
+
+ pinctrl_tsc2007: tsc2007grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
+ >;
+ };
+ };
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp>;
+ /* sample keymap */
+ /* row/col 0,1 are mapped to KPP row/col 6,7 */
+ linux,keymap = <
+ MATRIX_KEY(6, 6, KEY_POWER)
+ MATRIX_KEY(6, 7, KEY_KP0)
+ MATRIX_KEY(6, 2, KEY_KP1)
+ MATRIX_KEY(6, 3, KEY_KP2)
+ MATRIX_KEY(7, 6, KEY_KP3)
+ MATRIX_KEY(7, 7, KEY_KP4)
+ MATRIX_KEY(7, 2, KEY_KP5)
+ MATRIX_KEY(7, 3, KEY_KP6)
+ MATRIX_KEY(2, 6, KEY_KP7)
+ MATRIX_KEY(2, 7, KEY_KP8)
+ MATRIX_KEY(2, 2, KEY_KP9)
+ >;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
new file mode 100644
index 0000000..6480471
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -0,0 +1,243 @@
+/*
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Ka-Ro electronics TX53 module (LVDS)";
+ compatible = "karo,tx53", "fsl,imx53";
+
+ aliases {
+ display = &lvds0;
+ lvds0 = &lvds0;
+ lvds1 = &lvds1;
+ };
+
+ backlight0: backlight0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 0>;
+ power-supply = <®_3v3>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <50>;
+ };
+
+ backlight1: backlight1 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 500000 0>;
+ power-supply = <®_3v3>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <50>;
+ };
+
+ regulators {
+ reg_lcd_pwr0: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "LVDS0 POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reg_lcd_pwr1: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "LVDS1 POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ touchscreen2: eeti@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eeti2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <23 0>;
+ wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ linux,wakeup;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_2v5>;
+ VDDIO-supply = <®_3v3>;
+ clocks = <&mclk>;
+ };
+
+ touchscreen1: eeti@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eeti1>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <22 0>;
+ wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ linux,wakeup;
+ };
+};
+
+&iomuxc {
+ imx53-tx53-x13x {
+ pinctrl_i2c2: i2c2-grp1 {
+ fsl,pins = <
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_lvds0: lvds0grp {
+ fsl,pins = <
+ MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+ MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+ MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+ MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+ MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+ >;
+ };
+
+ pinctrl_lvds1: lvds1grp {
+ fsl,pins = <
+ MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+ MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+ MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+ MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+ MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
+ };
+
+ pinctrl_eeti1: eeti1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
+ >;
+ };
+
+ pinctrl_eeti2: eeti2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
+ >;
+ };
+ };
+};
+
+&ldb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ fsl,data-mapping = "jeida";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&lvds_timing0>;
+ lvds_timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hsync-len = <60>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vsync-len = <10>;
+ vfront-porch = <7>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+
+ lvds1: lvds-channel@1 {
+ fsl,data-mapping = "jeida";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&lvds_timing1>;
+ lvds_timing1: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hsync-len = <60>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vsync-len = <10>;
+ vfront-porch = <7>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index f494766..a44403a 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -1,122 +1,551 @@
/*
- * Copyright 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ * Copyright 2012 <LW@KARO-electronics.de>
+ * based on imx53-qsb.dts
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "imx53.dtsi"
+#include "imx53.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Ka-Ro TX53";
+ model = "Ka-Ro electronics TX53 module";
compatible = "karo,tx53", "fsl,imx53";
- memory {
- reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+ aliases {
+ can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
+ can1 = &can1;
+ ipu = &ipu;
+ reg_can_xcvr = ®_can_xcvr;
+ usbh1 = &usbh1;
+ usbotg = &usbotg;
+ };
+
+ clocks {
+ ckih1 {
+ clock-frequency = <0>;
+ };
+
+ mclk: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_key>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stk5led>;
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
};
regulators {
compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_3p3v: 3p3v {
+ reg_2v5: regulator@0 {
compatible = "regulator-fixed";
- regulator-name = "3P3V";
+ reg = <0>;
+ regulator-name = "2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ reg_3v3: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-always-on;
+ };
+
+ reg_can_xcvr: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "CAN XCVR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ enable-active-low;
+ };
+
+ reg_usbh1_vbus: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usbh1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_vbus>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usbotg_vbus: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usbotg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
+
+ sound {
+ compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
+ model = "tx53-audio-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ /* '1' based port numbers according to datasheet names */
+ mux-int-port = <1>;
+ mux-ext-port = <5>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssi1>;
+ status = "okay";
};
&can1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
};
&can2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can2_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_can2>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ fsl,spi-num-chipselects = <2>;
+ status = "okay";
+
+ cs-gpios = <
+ &gpio2 30 GPIO_ACTIVE_HIGH
+ &gpio3 19 GPIO_ACTIVE_HIGH
+ >;
+
+ spidev0: spi@0 {
+ compatible = "spidev";
+ reg = <0>;
+ spi-max-frequency = <54000000>;
+ };
+
+ spidev1: spi@1 {
+ compatible = "spidev";
+ reg = <1>;
+ spi-max-frequency = <54000000>;
+ };
};
&esdhc1 {
+ cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ fsl,wp-controller;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ status = "okay";
};
&esdhc2 {
+ cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+ fsl,wp-controller;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_esdhc2>;
+ status = "okay";
};
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
- status = "disabled";
+ phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ phy-handle = <&phy0>;
+ mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&gpio2>;
+ interrupts = <4>;
+ device_type = "ethernet-phy";
+ };
};
-&i2c3 {
+&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rtc1: ds1339@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ds1339>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <20 0>;
+ };
};
-&owire {
+&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_owire_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-tx53 {
+ pinctrl_hog: hoggrp {
+ /* pins not in use by any device on the Starterkit board series */
+ fsl,pins = <
+ /* CMOS Sensor Interface */
+ MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
+ MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
+ MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
+ MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
+ MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
+ MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
+ MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
+ MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
+ MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
+ MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
+ MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
+ MX53_PAD_GPIO_0__GPIO1_0 0x1f4
+ /* Module Specific Signal */
+ /* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
+ /* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
+ MX53_PAD_EIM_D29__GPIO3_29 0x1f4
+ MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
+ /* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
+ /* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
+ MX53_PAD_EIM_A19__GPIO2_19 0x1f4
+ MX53_PAD_EIM_A20__GPIO2_18 0x1f4
+ MX53_PAD_EIM_A21__GPIO2_17 0x1f4
+ MX53_PAD_EIM_A22__GPIO2_16 0x1f4
+ MX53_PAD_EIM_A23__GPIO6_6 0x1f4
+ MX53_PAD_EIM_A24__GPIO5_4 0x1f4
+ MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
+ MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
+ MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
+ MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
+ /* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
+ /* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
+ MX53_PAD_GPIO_13__GPIO4_3 0x1f4
+ MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
+ MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
+ MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
+ MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
+ MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
+ MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
+ MX53_PAD_EIM_OE__GPIO2_25 0x1f4
+ MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
+ MX53_PAD_EIM_RW__GPIO2_26 0x1f4
+ MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
+ MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
+ MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
+ MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
+ MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
+ MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
+ MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
+ MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000
+ MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
+ MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
+ >;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
+ };
+
+ pinctrl_ds1339: ds1339grp {
+ fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000
+ MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000
+ MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
+ MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
+ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
+ MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ MX53_PAD_EIM_D24__GPIO3_24 0x1f0
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ MX53_PAD_EIM_D25__GPIO3_25 0x1f0
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_gpio_key: gpio-keygrp {
+ fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
+ MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000
+ MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
+ >;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <
+ MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
+ MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
+ MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
+ MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
+ MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
+ MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
+ MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
+ MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0xa4
+ MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0xa4
+ MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0xa4
+ MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0xa4
+ MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0xa4
+ MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0xa4
+ MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0xa4
+ MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 0xa4
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000
+ >;
+ };
+
+ pinctrl_ssi1: ssi1grp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
+ >;
+ };
+
+ pinctrl_ssi2: ssi2grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000
+ MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000
+ MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000
+ MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000
+ MX53_PAD_EIM_D27__GPIO3_27 0x1f0
+ >;
+ };
+
+ pinctrl_stk5led: stk5ledgrp {
+ fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5
+ MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
+ MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5
+ MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
+ >;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
+ >;
+ };
+
+ pinctrl_usbh1_vbus: usbh1-vbusgrp {
+ fsl,pins = <
+ MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
+ >;
+ };
+
+ pinctrl_usbotg_vbus: usbotg-vbusgrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
+ MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
+ >;
+ };
+ };
+};
+
+&ipu {
+ status = "okay";
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
};
&pwm2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm2_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ #pwm-cells = <3>;
+};
+
+&sdma {
+ fsl,sdma-ram-script-name = "sdma-imx53.bin";
};
&ssi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "disabled";
+ fsl,mode = "i2s-slave";
+ codec-handle = <&sgtl5000>;
+ status = "okay";
};
&ssi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_2>;
status = "disabled";
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>,
- <&pinctrl_uart1_3>;
+ pinctrl-0 = <&pinctrl_uart1>;
fsl,uart-has-rtscts;
- status = "disabled";
+ status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_2>;
+ pinctrl-0 = <&pinctrl_uart2>;
fsl,uart-has-rtscts;
- status = "disabled";
+ status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
+ pinctrl-0 = <&pinctrl_uart3>;
fsl,uart-has-rtscts;
- status = "disabled";
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ phy_type = "utmi";
+ disable-over-current;
+ vbus-supply = <®_usbh1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ phy_type = "utmi";
+ dr_mode = "peripheral";
+ disable-over-current;
+ vbus-supply = <®_usbotg_vbus>;
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
new file mode 100644
index 0000000..7f6711a
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-voipac-dmm-668.dtsi"
+
+/ {
+ sound {
+ compatible = "fsl,imx53-voipac-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx53-voipac-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <5>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pin_gpio>;
+
+ led1 {
+ label = "led-red";
+ gpios = <&gpio3 29 0>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "led-orange";
+ gpios = <&gpio2 31 0>;
+ default-state = "off";
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-voipac {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SD2_CD */
+ MX53_PAD_EIM_D25__GPIO3_25 0x80000000
+ /* SD2_WP */
+ MX53_PAD_EIM_A19__GPIO2_19 0x80000000
+ >;
+ };
+
+ led_pin_gpio: led_gpio {
+ fsl,pins = <
+ MX53_PAD_EIM_D29__GPIO3_29 0x80000000
+ MX53_PAD_EIM_EB3__GPIO2_31 0x80000000
+ >;
+ };
+
+ /* Keyboard controller */
+ pinctrl_kpp_1: kppgrp-1 {
+ fsl,pins = <
+ MX53_PAD_GPIO_9__KPP_COL_6 0xe8
+ MX53_PAD_GPIO_4__KPP_COL_7 0xe8
+ MX53_PAD_KEY_COL2__KPP_COL_2 0xe8
+ MX53_PAD_KEY_COL3__KPP_COL_3 0xe8
+ MX53_PAD_KEY_COL4__KPP_COL_4 0xe8
+ MX53_PAD_GPIO_2__KPP_ROW_6 0xe0
+ MX53_PAD_GPIO_5__KPP_ROW_7 0xe0
+ MX53_PAD_KEY_ROW2__KPP_ROW_2 0xe0
+ MX53_PAD_KEY_ROW3__KPP_ROW_3 0xe0
+ MX53_PAD_KEY_ROW4__KPP_ROW_4 0xe0
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000
+ MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
+ >;
+ };
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
+ status = "okay";
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2>;
+ cd-gpios = <&gpio3 25 0>;
+ wp-gpios = <&gpio2 19 0>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ sgtl5000: codec@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ clocks = <&clks 150>;
+ };
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp_1>;
+ linux,keymap = <
+ 0x0203003b /* KEY_F1 */
+ 0x0603003c /* KEY_F2 */
+ 0x0207003d /* KEY_F3 */
+ 0x0607003e /* KEY_F4 */
+ >;
+ keypad,num-rows = <8>;
+ keypad,num-columns = <1>;
+ status = "okay";
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
new file mode 100644
index 0000000..ba689fb
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -0,0 +1,277 @@
+/*
+ * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+ model = "Voipac i.MX53 X53-DMM-668";
+ compatible = "voipac,imx53-dmm-668", "fsl,imx53";
+
+ memory@70000000 {
+ device_type = "memory";
+ reg = <0x70000000 0x20000000>;
+ };
+
+ memory@b0000000 {
+ device_type = "memory";
+ reg = <0xb0000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p3v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 31 0>; /* PEN */
+ enable-active-high;
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-voipac {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* Make DA9053 regulator functional */
+ MX53_PAD_GPIO_16__GPIO7_11 0x80000000
+ /* FEC Power enable */
+ MX53_PAD_GPIO_11__GPIO4_1 0x80000000
+ /* FEC RST */
+ MX53_PAD_GPIO_12__GPIO4_2 0x80000000
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
+ MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
+ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
+ MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <
+ MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
+ MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
+ MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
+ MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
+ MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
+ MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
+ MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
+ MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
+ MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
+ MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
+ MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
+ MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
+ MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
+ MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
+ MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
+ >;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ fsl,spi-num-chipselects = <4>;
+ cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio4 2 0>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: dialog@48 {
+ compatible = "dlg,da9053-aa", "dlg,da9052";
+ reg = <0x48>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+
+ regulators {
+ buck1_reg: buck1 {
+ regulator-name = "BUCKCORE";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-name = "BUCKPRO";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-name = "BUCKMEM";
+ regulator-min-microvolt = <1420000>;
+ regulator-max-microvolt = <1580000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: buck4 {
+ regulator-name = "BUCKPERI";
+ regulator-min-microvolt = <2370000>;
+ regulator-max-microvolt = <2630000>;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ regulator-name = "ldo1_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-name = "ldo2_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "ldo3_3v3";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "ldo4_2v775";
+ regulator-min-microvolt = <2770000>;
+ regulator-max-microvolt = <2780000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-name = "ldo5_3v3";
+ regulator-min-microvolt = <3250000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-name = "ldo6_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "ldo7_2v75";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "ldo8_1v8";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-name = "ldo9_1v5";
+ regulator-min-microvolt = <1450000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: ldo10 {
+ regulator-name = "ldo10_1v3";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_vbus>;
+ phy_type = "utmi";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 4307e80..80615df 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -12,6 +12,9 @@
#include "skeleton.dtsi"
#include "imx53-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
aliases {
@@ -25,6 +28,10 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
+ mmc0 = &esdhc1;
+ mmc1 = &esdhc2;
+ mmc2 = &esdhc3;
+ mmc3 = &esdhc4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
@@ -84,12 +91,25 @@
interrupt-parent = <&tzic>;
ranges;
+ sata: sata@10000000 {
+ compatible = "fsl,imx53-ahci";
+ reg = <0x10000000 0x1000>;
+ interrupts = <28>;
+ clocks = <&clks IMX5_CLK_SATA_GATE>,
+ <&clks IMX5_CLK_SATA_REF>,
+ <&clks IMX5_CLK_AHB>;
+ clock-names = "sata_gate", "sata_ref", "ahb";
+ status = "disabled";
+ };
+
ipu: ipu@18000000 {
#crtc-cells = <1>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x080000000>;
interrupts = <11 10>;
- clocks = <&clks 59>, <&clks 110>, <&clks 61>;
+ clocks = <&clks IMX5_CLK_IPU_GATE>,
+ <&clks IMX5_CLK_IPU_DI0_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_GATE>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
};
@@ -112,7 +132,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
- clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+ clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -122,7 +144,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
- clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+ clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -132,7 +156,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
- clocks = <&clks 32>, <&clks 33>;
+ clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+ <&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -143,16 +168,19 @@
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
- clocks = <&clks 51>, <&clks 52>;
+ clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
ssi2: ssi@50014000 {
- compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ compatible = "fsl,imx53-ssi",
+ "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
- clocks = <&clks 49>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
dmas = <&sdma 24 1 0>,
<&sdma 25 1 0>;
dma-names = "rx", "tx";
@@ -165,7 +193,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
- clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+ clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -175,7 +205,9 @@
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
- clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+ clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
@@ -184,14 +216,14 @@
usbphy0: usbphy@0 {
compatible = "usb-nop-xceiv";
- clocks = <&clks 124>;
+ clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
clock-names = "main_clk";
status = "okay";
};
usbphy1: usbphy@1 {
compatible = "usb-nop-xceiv";
- clocks = <&clks 125>;
+ clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
clock-names = "main_clk";
status = "okay";
};
@@ -200,7 +232,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
@@ -210,7 +242,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
status = "disabled";
@@ -220,7 +252,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
status = "disabled";
};
@@ -229,7 +261,7 @@
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
status = "disabled";
};
@@ -238,7 +270,7 @@
#index-cells = <1>;
compatible = "fsl,imx53-usbmisc";
reg = <0x53f80800 0x200>;
- clocks = <&clks 108>;
+ clocks = <&clks IMX5_CLK_USBOH3_GATE>;
};
gpio1: gpio@53f84000 {
@@ -281,18 +313,26 @@
#interrupt-cells = <2>;
};
+ kpp: kpp@53f94000 {
+ compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
+ reg = <0x53f94000 0x4000>;
+ interrupts = <60>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
+ status = "disabled";
+ };
+
wdog1: wdog@53f98000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
};
wdog2: wdog@53f9c000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f9c000 0x4000>;
interrupts = <59>;
- clocks = <&clks 0>;
+ clocks = <&clks IMX5_CLK_DUMMY>;
status = "disabled";
};
@@ -300,521 +340,14 @@
compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
reg = <0x53fa0000 0x4000>;
interrupts = <39>;
- clocks = <&clks 36>, <&clks 41>;
+ clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+ <&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per";
};
iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
-
- audmux {
- pinctrl_audmux_1: audmuxgrp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000
- MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000
- MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000
- MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000
- >;
- };
-
- pinctrl_audmux_2: audmuxgrp-2 {
- fsl,pins = <
- MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000
- MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000
- MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000
- MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000
- >;
- };
-
- pinctrl_audmux_3: audmuxgrp-3 {
- fsl,pins = <
- MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000
- MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000
- MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000
- MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000
- >;
- };
- };
-
- fec {
- pinctrl_fec_1: fecgrp-1 {
- fsl,pins = <
- MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
- >;
- };
-
- pinctrl_fec_2: fecgrp-2 {
- fsl,pins = <
- MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
- MX53_PAD_KEY_ROW1__FEC_COL 0x80000000
- MX53_PAD_KEY_COL3__FEC_CRS 0x80000000
- MX53_PAD_KEY_COL2__FEC_RDATA_2 0x80000000
- MX53_PAD_KEY_COL0__FEC_RDATA_3 0x80000000
- MX53_PAD_KEY_COL1__FEC_RX_CLK 0x80000000
- MX53_PAD_KEY_ROW2__FEC_TDATA_2 0x80000000
- MX53_PAD_GPIO_19__FEC_TDATA_3 0x80000000
- MX53_PAD_KEY_ROW0__FEC_TX_ER 0x80000000
- >;
- };
- };
-
- csi {
- pinctrl_csi_1: csigrp-1 {
- fsl,pins = <
- MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1d5
- MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5
- MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
- MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5
- MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5
- MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5
- MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5
- MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5
- MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5
- MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5
- MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5
- MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 0x1d5
- MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 0x1d5
- MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 0x1d5
- MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 0x1d5
- MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 0x1d5
- MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 0x1d5
- MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 0x1d5
- MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 0x1d5
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
- >;
- };
-
- pinctrl_csi_2: csigrp-2 {
- fsl,pins = <
- MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5
- MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5
- MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5
- MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5
- MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5
- MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5
- MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5
- MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5
- MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5
- MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5
- MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5
- >;
- };
- };
-
- cspi {
- pinctrl_cspi_1: cspigrp-1 {
- fsl,pins = <
- MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5
- MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5
- MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5
- >;
- };
-
- pinctrl_cspi_2: cspigrp-2 {
- fsl,pins = <
- MX53_PAD_EIM_D22__CSPI_MISO 0x1d5
- MX53_PAD_EIM_D28__CSPI_MOSI 0x1d5
- MX53_PAD_EIM_D21__CSPI_SCLK 0x1d5
- >;
- };
- };
-
- ecspi1 {
- pinctrl_ecspi1_1: ecspi1grp-1 {
- fsl,pins = <
- MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
- MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
- MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
- >;
- };
-
- pinctrl_ecspi1_2: ecspi1grp-2 {
- fsl,pins = <
- MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000
- MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000
- MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
- MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
- MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
- MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000
- >;
- };
- };
-
- ecspi2 {
- pinctrl_ecspi2_1: ecspi2grp-1 {
- fsl,pins = <
- MX53_PAD_EIM_OE__ECSPI2_MISO 0x80000000
- MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x80000000
- MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x80000000
- >;
- };
- };
-
- esdhc1 {
- pinctrl_esdhc1_1: esdhc1grp-1 {
- fsl,pins = <
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
- MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
- MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
- >;
- };
-
- pinctrl_esdhc1_2: esdhc1grp-2 {
- fsl,pins = <
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
- MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5
- MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5
- MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5
- MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5
- MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
- MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
- >;
- };
- };
-
- esdhc2 {
- pinctrl_esdhc2_1: esdhc2grp-1 {
- fsl,pins = <
- MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
- MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
- MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
- MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
- MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
- MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
- >;
- };
- };
-
- esdhc3 {
- pinctrl_esdhc3_1: esdhc3grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
- MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
- MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
- MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
- MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
- MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
- MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
- MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
- MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
- MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
- >;
- };
- };
-
- can1 {
- pinctrl_can1_1: can1grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x80000000
- MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x80000000
- >;
- };
-
- pinctrl_can1_2: can1grp-2 {
- fsl,pins = <
- MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000
- MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000
- >;
- };
-
- pinctrl_can1_3: can1grp-3 {
- fsl,pins = <
- MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000
- MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000
- >;
- };
- };
-
- can2 {
- pinctrl_can2_1: can2grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000
- MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000
- >;
- };
- };
-
- i2c1 {
- pinctrl_i2c1_1: i2c1grp-1 {
- fsl,pins = <
- MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
- MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
- >;
- };
-
- pinctrl_i2c1_2: i2c1grp-2 {
- fsl,pins = <
- MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
- MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
- >;
- };
- };
-
- i2c2 {
- pinctrl_i2c2_1: i2c2grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
- MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
- >;
- };
-
- pinctrl_i2c2_2: i2c2grp-2 {
- fsl,pins = <
- MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000
- MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000
- >;
- };
- };
-
- i2c3 {
- pinctrl_i2c3_1: i2c3grp-1 {
- fsl,pins = <
- MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
- MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
- >;
- };
- };
-
- ipu_disp0 {
- pinctrl_ipu_disp0_1: ipudisp0grp-1 {
- fsl,pins = <
- MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5
- MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5
- MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5
- MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5
- MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5
- MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5
- MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5
- MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5
- MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5
- MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5
- MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5
- MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5
- MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5
- MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5
- MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5
- MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5
- MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5
- MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5
- MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5
- MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5
- MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5
- MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5
- MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5
- MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5
- MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5
- MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5
- MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5
- MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
- >;
- };
- };
-
- ipu_disp1 {
- pinctrl_ipu_disp1_1: ipudisp1grp-1 {
- fsl,pins = <
- MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5
- MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5
- MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5
- MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5
- MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5
- MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5
- MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5
- MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5
- MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5
- MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5
- MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5
- MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5
- MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5
- MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5
- MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5
- MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5
- MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5
- MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5
- MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5
- MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5
- MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5
- MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5
- MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5
- MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5
- MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5
- MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5
- MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5
- MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5
- MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5
- MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5
- MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5
- MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5
- >;
- };
- };
-
- ipu_disp2 {
- pinctrl_ipu_disp2_1: ipudisp2grp-1 {
- fsl,pins = <
- MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
- MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
- MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
- MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
- MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
- MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
- MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
- MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
- MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
- MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
- >;
- };
- };
-
- nand {
- pinctrl_nand_1: nandgrp-1 {
- fsl,pins = <
- MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4
- MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4
- MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4
- MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4
- MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0
- MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0
- MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4
- MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4
- MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4
- MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4
- MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4
- MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4
- MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4
- MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4
- MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4
- >;
- };
- };
-
- owire {
- pinctrl_owire_1: owiregrp-1 {
- fsl,pins = <
- MX53_PAD_GPIO_18__OWIRE_LINE 0x80000000
- >;
- };
- };
-
- pwm1 {
- pinctrl_pwm1_1: pwm1grp-1 {
- fsl,pins = <
- MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5
- >;
- };
- };
-
- pwm2 {
- pinctrl_pwm2_1: pwm2grp-1 {
- fsl,pins = <
- MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
- MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
- MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
- >;
- };
-
- pinctrl_uart1_2: uart1grp-2 {
- fsl,pins = <
- MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
- MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
- >;
- };
-
- pinctrl_uart1_3: uart1grp-3 {
- fsl,pins = <
- MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5
- MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5
- >;
- };
- };
-
- uart2 {
- pinctrl_uart2_1: uart2grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
- >;
- };
-
- pinctrl_uart2_2: uart2grp-2 {
- fsl,pins = <
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5
- MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5
- MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5
- >;
- };
- };
-
- uart3 {
- pinctrl_uart3_1: uart3grp-1 {
- fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
- MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
- MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
- >;
- };
-
- pinctrl_uart3_2: uart3grp-2 {
- fsl,pins = <
- MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
- MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
- >;
- };
-
- };
-
- uart4 {
- pinctrl_uart4_1: uart4grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
- MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
- >;
- };
- };
-
- uart5 {
- pinctrl_uart5_1: uart5grp-1 {
- fsl,pins = <
- MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
- MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
- >;
- };
- };
};
gpr: iomuxc-gpr@53fa8000 {
@@ -828,9 +361,12 @@
compatible = "fsl,imx53-ldb";
reg = <0x53fa8008 0x4>;
gpr = <&gpr>;
- clocks = <&clks 122>, <&clks 120>,
- <&clks 115>, <&clks 116>,
- <&clks 123>, <&clks 85>;
+ clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+ <&clks IMX5_CLK_LDB_DI1_SEL>,
+ <&clks IMX5_CLK_IPU_DI0_SEL>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>,
+ <&clks IMX5_CLK_LDB_DI0_GATE>,
+ <&clks IMX5_CLK_LDB_DI1_GATE>;
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel",
"di0", "di1";
@@ -853,7 +389,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
- clocks = <&clks 37>, <&clks 38>;
+ clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+ <&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <61>;
};
@@ -862,7 +399,8 @@
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
- clocks = <&clks 39>, <&clks 40>;
+ clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+ <&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <94>;
};
@@ -871,7 +409,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
- clocks = <&clks 28>, <&clks 29>;
+ clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+ <&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -880,7 +419,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
- clocks = <&clks 30>, <&clks 31>;
+ clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+ <&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -889,7 +429,8 @@
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
- clocks = <&clks 158>, <&clks 157>;
+ clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
+ <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -898,7 +439,8 @@
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
- clocks = <&clks 87>, <&clks 86>;
+ clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
+ <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -952,7 +494,7 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
- clocks = <&clks 88>;
+ clocks = <&clks IMX5_CLK_I2C3_GATE>;
status = "disabled";
};
@@ -960,7 +502,8 @@
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
- clocks = <&clks 65>, <&clks 66>;
+ clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+ <&clks IMX5_CLK_UART4_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -977,14 +520,15 @@
compatible = "fsl,imx53-iim", "fsl,imx27-iim";
reg = <0x63f98000 0x4000>;
interrupts = <69>;
- clocks = <&clks 107>;
+ clocks = <&clks IMX5_CLK_IIM_GATE>;
};
uart5: serial@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
- clocks = <&clks 67>, <&clks 68>;
+ clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+ <&clks IMX5_CLK_UART5_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -992,7 +536,7 @@
owire: owire@63fa4000 {
compatible = "fsl,imx53-owire", "fsl,imx21-owire";
reg = <0x63fa4000 0x4000>;
- clocks = <&clks 159>;
+ clocks = <&clks IMX5_CLK_OWIRE_GATE>;
status = "disabled";
};
@@ -1002,7 +546,8 @@
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
- clocks = <&clks 53>, <&clks 54>;
+ clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+ <&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -1011,7 +556,8 @@
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
- clocks = <&clks 56>, <&clks 56>;
+ clocks = <&clks IMX5_CLK_SDMA_GATE>,
+ <&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
@@ -1023,7 +569,8 @@
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
- clocks = <&clks 55>, <&clks 55>;
+ clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+ <&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -1034,7 +581,7 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
- clocks = <&clks 35>;
+ clocks = <&clks IMX5_CLK_I2C2_GATE>;
status = "disabled";
};
@@ -1044,15 +591,16 @@
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
- clocks = <&clks 34>;
+ clocks = <&clks IMX5_CLK_I2C1_GATE>;
status = "disabled";
};
ssi1: ssi@63fcc000 {
- compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
- clocks = <&clks 48>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
dmas = <&sdma 28 0 0>,
<&sdma 29 0 0>;
dma-names = "rx", "tx";
@@ -1071,15 +619,16 @@
compatible = "fsl,imx53-nand";
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
interrupts = <8>;
- clocks = <&clks 60>;
+ clocks = <&clks IMX5_CLK_NFC_GATE>;
status = "disabled";
};
ssi3: ssi@63fe8000 {
- compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
+ "fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
- clocks = <&clks 50>;
+ clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
dmas = <&sdma 46 0 0>,
<&sdma 47 0 0>;
dma-names = "rx", "tx";
@@ -1092,7 +641,9 @@
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
- clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+ clocks = <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>,
+ <&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
@@ -1101,7 +652,8 @@
compatible = "fsl,imx53-tve";
reg = <0x63ff0000 0x1000>;
interrupts = <92>;
- clocks = <&clks 69>, <&clks 116>;
+ clocks = <&clks IMX5_CLK_TVE_GATE>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>;
clock-names = "tve", "di_sel";
crtcs = <&ipu 1>;
status = "disabled";
@@ -1111,7 +663,8 @@
compatible = "fsl,imx53-vpu";
reg = <0x63ff4000 0x1000>;
interrupts = <9>;
- clocks = <&clks 63>, <&clks 63>;
+ clocks = <&clks IMX5_CLK_VPU_GATE>,
+ <&clks IMX5_CLK_VPU_GATE>;
clock-names = "per", "ahb";
iram = <&ocram>;
status = "disabled";
@@ -1121,7 +674,7 @@
ocram: sram@f8000000 {
compatible = "mmio-sram";
reg = <0xf8000000 0x20000>;
- clocks = <&clks 186>;
+ clocks = <&clks IMX5_CLK_OCRAM>;
};
};
};
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
index c42e4f9..3fd1b74 100644
--- a/arch/arm/boot/dts/vf610-cosmic.dts
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -36,12 +36,37 @@
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1_1>;
+ pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
+&iomuxc {
+ vf610-cosmic {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+ };
+};
+
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index c8047ca..e3a3805 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -39,7 +39,7 @@
&dspi0 {
bus-num = <0>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_dspi0_1>;
+ pinctrl-0 = <&pinctrl_dspi0>;
status = "okay";
sflash: at26df081a@0 {
@@ -56,26 +56,82 @@
&fec0 {
phy-mode = "rmii";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec0_1>;
+ pinctrl-0 = <&pinctrl_fec0>;
status = "okay";
};
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1_1>;
+ pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&i2c0 {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0_1>;
+ pinctrl-0 = <&pinctrl_i2c0>;
status = "okay";
};
+&iomuxc {
+ vf610-twr {
+ pinctrl_dspi0: dspi0grp {
+ fsl,pins = <
+ VF610_PAD_PTB19__DSPI0_CS0 0x1182
+ VF610_PAD_PTB20__DSPI0_SIN 0x1181
+ VF610_PAD_PTB21__DSPI0_SOUT 0x1182
+ VF610_PAD_PTB22__DSPI0_SCK 0x1182
+ >;
+ };
+
+ pinctrl_fec0: fec0grp {
+ fsl,pins = <
+ VF610_PAD_PTA6__RMII_CLKIN 0x30d1
+ VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3
+ VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1
+ VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
+ VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
+ VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
+ VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
+ VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
+ VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
+ VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x30d3
+ VF610_PAD_PTB15__I2C0_SDA 0x30d3
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+ };
+};
+
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index d31ce1b..107e2c0 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -10,6 +10,7 @@
#include "skeleton.dtsi"
#include "vf610-pinfunc.h"
#include <dt-bindings/clock/vf610-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
aliases {
@@ -90,7 +91,7 @@
uart0: serial@40027000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40027000 0x1000>;
- interrupts = <0 61 0x00>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART0>;
clock-names = "ipg";
status = "disabled";
@@ -99,7 +100,7 @@
uart1: serial@40028000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40028000 0x1000>;
- interrupts = <0 62 0x04>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART1>;
clock-names = "ipg";
status = "disabled";
@@ -108,7 +109,7 @@
uart2: serial@40029000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40029000 0x1000>;
- interrupts = <0 63 0x04>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART2>;
clock-names = "ipg";
status = "disabled";
@@ -117,7 +118,7 @@
uart3: serial@4002a000 {
compatible = "fsl,vf610-lpuart";
reg = <0x4002a000 0x1000>;
- interrupts = <0 64 0x04>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART3>;
clock-names = "ipg";
status = "disabled";
@@ -128,7 +129,7 @@
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
reg = <0x4002c000 0x1000>;
- interrupts = <0 67 0x04>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
spi-num-chipselects = <5>;
@@ -138,7 +139,7 @@
sai2: sai@40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
- interrupts = <0 86 0x04>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI2>;
clock-names = "sai";
status = "disabled";
@@ -147,7 +148,7 @@
pit: pit@40037000 {
compatible = "fsl,vf610-pit";
reg = <0x40037000 0x1000>;
- interrupts = <0 39 0x04>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_PIT>;
clock-names = "pit";
};
@@ -164,7 +165,7 @@
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
reg = <0x40044000 0x1000>;
- interrupts = <0 24 0x04>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_QSPI0_EN>,
<&clks VF610_CLK_QSPI0>;
clock-names = "qspi_en", "qspi";
@@ -175,182 +176,12 @@
compatible = "fsl,vf610-iomuxc";
reg = <0x40048000 0x1000>;
#gpio-range-cells = <3>;
-
- /* functions and groups pins */
-
- dcu0 {
- pinctrl_dcu0_1: dcu0grp_1 {
- fsl,pins = <
- VF610_PAD_PTB8__GPIO_30 0x42
- VF610_PAD_PTE0__DCU0_HSYNC 0x42
- VF610_PAD_PTE1__DCU0_VSYNC 0x42
- VF610_PAD_PTE2__DCU0_PCLK 0x42
- VF610_PAD_PTE4__DCU0_DE 0x42
- VF610_PAD_PTE5__DCU0_R0 0x42
- VF610_PAD_PTE6__DCU0_R1 0x42
- VF610_PAD_PTE7__DCU0_R2 0x42
- VF610_PAD_PTE8__DCU0_R3 0x42
- VF610_PAD_PTE9__DCU0_R4 0x42
- VF610_PAD_PTE10__DCU0_R5 0x42
- VF610_PAD_PTE11__DCU0_R6 0x42
- VF610_PAD_PTE12__DCU0_R7 0x42
- VF610_PAD_PTE13__DCU0_G0 0x42
- VF610_PAD_PTE14__DCU0_G1 0x42
- VF610_PAD_PTE15__DCU0_G2 0x42
- VF610_PAD_PTE16__DCU0_G3 0x42
- VF610_PAD_PTE17__DCU0_G4 0x42
- VF610_PAD_PTE18__DCU0_G5 0x42
- VF610_PAD_PTE19__DCU0_G6 0x42
- VF610_PAD_PTE20__DCU0_G7 0x42
- VF610_PAD_PTE21__DCU0_B0 0x42
- VF610_PAD_PTE22__DCU0_B1 0x42
- VF610_PAD_PTE23__DCU0_B2 0x42
- VF610_PAD_PTE24__DCU0_B3 0x42
- VF610_PAD_PTE25__DCU0_B4 0x42
- VF610_PAD_PTE26__DCU0_B5 0x42
- VF610_PAD_PTE27__DCU0_B6 0x42
- VF610_PAD_PTE28__DCU0_B7 0x42
- >;
- };
- };
-
- dspi0 {
- pinctrl_dspi0_1: dspi0grp_1 {
- fsl,pins = <
- VF610_PAD_PTB19__DSPI0_CS0 0x1182
- VF610_PAD_PTB20__DSPI0_SIN 0x1181
- VF610_PAD_PTB21__DSPI0_SOUT 0x1182
- VF610_PAD_PTB22__DSPI0_SCK 0x1182
- >;
- };
- };
-
- esdhc1 {
- pinctrl_esdhc1_1: esdhc1grp_1 {
- fsl,pins = <
- VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
- VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
- VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
- VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
- VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
- VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
- VF610_PAD_PTA7__GPIO_134 0x219d
- >;
- };
- };
-
- fec0 {
- pinctrl_fec0_1: fec0grp_1 {
- fsl,pins = <
- VF610_PAD_PTA6__RMII_CLKIN 0x30d1
- VF610_PAD_PTC0__ENET_RMII0_MDC 0x30d3
- VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30d1
- VF610_PAD_PTC2__ENET_RMII0_CRS 0x30d1
- VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30d1
- VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30d1
- VF610_PAD_PTC5__ENET_RMII0_RXER 0x30d1
- VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30d2
- VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30d2
- VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30d2
- >;
- };
- };
-
- fec1 {
- pinctrl_fec1_1: fec1grp_1 {
- fsl,pins = <
- VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
- VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
- VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
- VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
- VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
- VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
- VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
- VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
- VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
- >;
- };
- };
-
- i2c0 {
- pinctrl_i2c0_1: i2c0grp_1 {
- fsl,pins = <
- VF610_PAD_PTB14__I2C0_SCL 0x30d3
- VF610_PAD_PTB15__I2C0_SDA 0x30d3
- >;
- };
- };
-
- pwm0 {
- pinctrl_pwm0_1: pwm0grp_1 {
- fsl,pins = <
- VF610_PAD_PTB0__FTM0_CH0 0x1582
- VF610_PAD_PTB1__FTM0_CH1 0x1582
- VF610_PAD_PTB2__FTM0_CH2 0x1582
- VF610_PAD_PTB3__FTM0_CH3 0x1582
- VF610_PAD_PTB6__FTM0_CH6 0x1582
- VF610_PAD_PTB7__FTM0_CH7 0x1582
- >;
- };
- };
-
- qspi0 {
- pinctrl_qspi0_1: qspi0grp_1 {
- fsl,pins = <
- VF610_PAD_PTD0__QSPI0_A_QSCK 0x307b
- VF610_PAD_PTD1__QSPI0_A_CS0 0x307f
- VF610_PAD_PTD2__QSPI0_A_DATA3 0x3073
- VF610_PAD_PTD3__QSPI0_A_DATA2 0x3073
- VF610_PAD_PTD4__QSPI0_A_DATA1 0x3073
- VF610_PAD_PTD5__QSPI0_A_DATA0 0x307b
- VF610_PAD_PTD7__QSPI0_B_QSCK 0x307b
- VF610_PAD_PTD8__QSPI0_B_CS0 0x307f
- VF610_PAD_PTD9__QSPI0_B_DATA3 0x3073
- VF610_PAD_PTD10__QSPI0_B_DATA2 0x3073
- VF610_PAD_PTD11__QSPI0_B_DATA1 0x3073
- VF610_PAD_PTD12__QSPI0_B_DATA0 0x307b
- >;
- };
- };
-
- sai2 {
- pinctrl_sai2_1: sai2grp_1 {
- fsl,pins = <
- VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed
- VF610_PAD_PTA18__SAI2_TX_DATA 0x02ee
- VF610_PAD_PTA19__SAI2_TX_SYNC 0x02ed
- VF610_PAD_PTA21__SAI2_RX_BCLK 0x02ed
- VF610_PAD_PTA22__SAI2_RX_DATA 0x02ed
- VF610_PAD_PTA23__SAI2_RX_SYNC 0x02ed
- VF610_PAD_PTB18__EXT_AUDIO_MCLK 0x02ed
- >;
- };
- };
-
- uart1 {
- pinctrl_uart1_1: uart1grp_1 {
- fsl,pins = <
- VF610_PAD_PTB4__UART1_TX 0x21a2
- VF610_PAD_PTB5__UART1_RX 0x21a1
- >;
- };
- };
-
- usbvbus {
- pinctrl_usbvbus_1: usbvbusgrp_1 {
- fsl,pins = <
- VF610_PAD_PTA24__USB1_VBUS_EN 0x219c
- VF610_PAD_PTA16__USB0_VBUS_EN 0x219c
- >;
- };
- };
-
};
gpio1: gpio@40049000 {
compatible = "fsl,vf610-gpio";
reg = <0x40049000 0x1000 0x400ff000 0x40>;
- interrupts = <0 107 0x04>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -361,7 +192,7 @@
gpio2: gpio@4004a000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004a000 0x1000 0x400ff040 0x40>;
- interrupts = <0 108 0x04>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -372,7 +203,7 @@
gpio3: gpio@4004b000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004b000 0x1000 0x400ff080 0x40>;
- interrupts = <0 109 0x04>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -383,7 +214,7 @@
gpio4: gpio@4004c000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
- interrupts = <0 110 0x04>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -394,7 +225,7 @@
gpio5: gpio@4004d000 {
compatible = "fsl,vf610-gpio";
reg = <0x4004d000 0x1000 0x400ff100 0x40>;
- interrupts = <0 111 0x04>;
+ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -412,7 +243,7 @@
#size-cells = <0>;
compatible = "fsl,vf610-i2c";
reg = <0x40066000 0x1000>;
- interrupts =<0 71 0x04>;
+ interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_I2C0>;
clock-names = "ipg";
status = "disabled";
@@ -435,7 +266,7 @@
uart4: serial@400a9000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400a9000 0x1000>;
- interrupts = <0 65 0x04>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART4>;
clock-names = "ipg";
status = "disabled";
@@ -444,7 +275,7 @@
uart5: serial@400aa000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400aa000 0x1000>;
- interrupts = <0 66 0x04>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART5>;
clock-names = "ipg";
status = "disabled";
@@ -453,7 +284,7 @@
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
- interrupts = <0 78 0x04>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
@@ -464,7 +295,7 @@
fec1: ethernet@400d1000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
- interrupts = <0 79 0x04>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 1dc5acd..2e7cec8 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -157,6 +157,8 @@
OUI_FSL,
OUI_DENX,
OUI_CRYSTALFONTZ,
+ OUI_I2SE,
+ OUI_ARMADEUS,
};
static void __init update_fec_mac_prop(enum mac_oui oui)
@@ -211,6 +213,16 @@
macaddr[1] = 0xb9;
macaddr[2] = 0xe1;
break;
+ case OUI_I2SE:
+ macaddr[0] = 0x00;
+ macaddr[1] = 0x01;
+ macaddr[2] = 0x87;
+ break;
+ case OUI_ARMADEUS:
+ macaddr[0] = 0x00;
+ macaddr[1] = 0x1e;
+ macaddr[2] = 0xac;
+ break;
}
val = ocotp[i];
macaddr[3] = (val >> 16) & 0xff;
@@ -236,6 +248,11 @@
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
}
+static void __init imx28_apf28_init(void)
+{
+ update_fec_mac_prop(OUI_ARMADEUS);
+}
+
static int apx4devkit_phy_fixup(struct phy_device *phy)
{
phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
@@ -330,6 +347,11 @@
update_fec_mac_prop(OUI_CRYSTALFONTZ);
}
+static void __init duckbill_init(void)
+{
+ update_fec_mac_prop(OUI_I2SE);
+}
+
static void __init m28cu3_init(void)
{
update_fec_mac_prop(OUI_DENX);
@@ -426,6 +448,11 @@
return 0;
}
+static void __init eukrea_mbmx283lc_init(void)
+{
+ mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
+}
+
static void __init mxs_machine_init(void)
{
struct device_node *root;
@@ -458,10 +485,16 @@
if (of_machine_is_compatible("fsl,imx28-evk"))
imx28_evk_init();
+ if (of_machine_is_compatible("armadeus,imx28-apf28"))
+ imx28_apf28_init();
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
apx4devkit_init();
else if (of_machine_is_compatible("crystalfontz,cfa10036"))
crystalfontz_init();
+ else if (of_machine_is_compatible("eukrea,mbmx283lc"))
+ eukrea_mbmx283lc_init();
+ else if (of_machine_is_compatible("i2se,duckbill"))
+ duckbill_init();
else if (of_machine_is_compatible("msr,m28cu3"))
m28cu3_init();