| /* |
| * tc35815.c: A TOSHIBA TC35815CF PCI 10/100Mbps ethernet driver for linux. |
| * |
| * Based on skelton.c by Donald Becker. |
| * |
| * This driver is a replacement of older and less maintained version. |
| * This is a header of the older version: |
| * -----<snip>----- |
| * Copyright 2001 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. |
| * ahennessy@mvista.com |
| * Copyright (C) 2000-2001 Toshiba Corporation |
| * static const char *version = |
| * "tc35815.c:v0.00 26/07/2000 by Toshiba Corporation\n"; |
| * -----<snip>----- |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * (C) Copyright TOSHIBA CORPORATION 2004-2005 |
| * All Rights Reserved. |
| */ |
| |
| #ifdef TC35815_NAPI |
| #define DRV_VERSION "1.36-NAPI" |
| #else |
| #define DRV_VERSION "1.36" |
| #endif |
| static const char *version = "tc35815.c:v" DRV_VERSION "\n"; |
| #define MODNAME "tc35815" |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/fcntl.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/in.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/spinlock.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/platform_device.h> |
| #include <asm/io.h> |
| #include <asm/byteorder.h> |
| |
| /* First, a few definitions that the brave might change. */ |
| |
| #define GATHER_TXINT /* On-Demand Tx Interrupt */ |
| #define WORKAROUND_LOSTCAR |
| #define WORKAROUND_100HALF_PROMISC |
| /* #define TC35815_USE_PACKEDBUFFER */ |
| |
| typedef enum { |
| TC35815CF = 0, |
| TC35815_NWU, |
| TC35815_TX4939, |
| } board_t; |
| |
| /* indexed by board_t, above */ |
| static const struct { |
| const char *name; |
| } board_info[] __devinitdata = { |
| { "TOSHIBA TC35815CF 10/100BaseTX" }, |
| { "TOSHIBA TC35815 with Wake on LAN" }, |
| { "TOSHIBA TC35815/TX4939" }, |
| }; |
| |
| static const struct pci_device_id tc35815_pci_tbl[] = { |
| {PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815CF), .driver_data = TC35815CF }, |
| {PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815_NWU), .driver_data = TC35815_NWU }, |
| {PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939), .driver_data = TC35815_TX4939 }, |
| {0,} |
| }; |
| MODULE_DEVICE_TABLE (pci, tc35815_pci_tbl); |
| |
| /* see MODULE_PARM_DESC */ |
| static struct tc35815_options { |
| int speed; |
| int duplex; |
| int doforce; |
| } options; |
| |
| /* |
| * Registers |
| */ |
| struct tc35815_regs { |
| volatile __u32 DMA_Ctl; /* 0x00 */ |
| volatile __u32 TxFrmPtr; |
| volatile __u32 TxThrsh; |
| volatile __u32 TxPollCtr; |
| volatile __u32 BLFrmPtr; |
| volatile __u32 RxFragSize; |
| volatile __u32 Int_En; |
| volatile __u32 FDA_Bas; |
| volatile __u32 FDA_Lim; /* 0x20 */ |
| volatile __u32 Int_Src; |
| volatile __u32 unused0[2]; |
| volatile __u32 PauseCnt; |
| volatile __u32 RemPauCnt; |
| volatile __u32 TxCtlFrmStat; |
| volatile __u32 unused1; |
| volatile __u32 MAC_Ctl; /* 0x40 */ |
| volatile __u32 CAM_Ctl; |
| volatile __u32 Tx_Ctl; |
| volatile __u32 Tx_Stat; |
| volatile __u32 Rx_Ctl; |
| volatile __u32 Rx_Stat; |
| volatile __u32 MD_Data; |
| volatile __u32 MD_CA; |
| volatile __u32 CAM_Adr; /* 0x60 */ |
| volatile __u32 CAM_Data; |
| volatile __u32 CAM_Ena; |
| volatile __u32 PROM_Ctl; |
| volatile __u32 PROM_Data; |
| volatile __u32 Algn_Cnt; |
| volatile __u32 CRC_Cnt; |
| volatile __u32 Miss_Cnt; |
| }; |
| |
| /* |
| * Bit assignments |
| */ |
| /* DMA_Ctl bit asign ------------------------------------------------------- */ |
| #define DMA_RxAlign 0x00c00000 /* 1:Reception Alignment */ |
| #define DMA_RxAlign_1 0x00400000 |
| #define DMA_RxAlign_2 0x00800000 |
| #define DMA_RxAlign_3 0x00c00000 |
| #define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */ |
| #define DMA_IntMask 0x00040000 /* 1:Interupt mask */ |
| #define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */ |
| #define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */ |
| #define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */ |
| #define DMA_TxBigE 0x00004000 /* 1:Transmit Big Endian */ |
| #define DMA_TestMode 0x00002000 /* 1:Test Mode */ |
| #define DMA_PowrMgmnt 0x00001000 /* 1:Power Management */ |
| #define DMA_DmBurst_Mask 0x000001fc /* DMA Burst size */ |
| |
| /* RxFragSize bit asign ---------------------------------------------------- */ |
| #define RxFrag_EnPack 0x00008000 /* 1:Enable Packing */ |
| #define RxFrag_MinFragMask 0x00000ffc /* Minimum Fragment */ |
| |
| /* MAC_Ctl bit asign ------------------------------------------------------- */ |
| #define MAC_Link10 0x00008000 /* 1:Link Status 10Mbits */ |
| #define MAC_EnMissRoll 0x00002000 /* 1:Enable Missed Roll */ |
| #define MAC_MissRoll 0x00000400 /* 1:Missed Roll */ |
| #define MAC_Loop10 0x00000080 /* 1:Loop 10 Mbps */ |
| #define MAC_Conn_Auto 0x00000000 /*00:Connection mode (Automatic) */ |
| #define MAC_Conn_10M 0x00000020 /*01: (10Mbps endec)*/ |
| #define MAC_Conn_Mll 0x00000040 /*10: (Mll clock) */ |
| #define MAC_MacLoop 0x00000010 /* 1:MAC Loopback */ |
| #define MAC_FullDup 0x00000008 /* 1:Full Duplex 0:Half Duplex */ |
| #define MAC_Reset 0x00000004 /* 1:Software Reset */ |
| #define MAC_HaltImm 0x00000002 /* 1:Halt Immediate */ |
| #define MAC_HaltReq 0x00000001 /* 1:Halt request */ |
| |
| /* PROM_Ctl bit asign ------------------------------------------------------ */ |
| #define PROM_Busy 0x00008000 /* 1:Busy (Start Operation) */ |
| #define PROM_Read 0x00004000 /*10:Read operation */ |
| #define PROM_Write 0x00002000 /*01:Write operation */ |
| #define PROM_Erase 0x00006000 /*11:Erase operation */ |
| /*00:Enable or Disable Writting, */ |
| /* as specified in PROM_Addr. */ |
| #define PROM_Addr_Ena 0x00000030 /*11xxxx:PROM Write enable */ |
| /*00xxxx: disable */ |
| |
| /* CAM_Ctl bit asign ------------------------------------------------------- */ |
| #define CAM_CompEn 0x00000010 /* 1:CAM Compare Enable */ |
| #define CAM_NegCAM 0x00000008 /* 1:Reject packets CAM recognizes,*/ |
| /* accept other */ |
| #define CAM_BroadAcc 0x00000004 /* 1:Broadcast assept */ |
| #define CAM_GroupAcc 0x00000002 /* 1:Multicast assept */ |
| #define CAM_StationAcc 0x00000001 /* 1:unicast accept */ |
| |
| /* CAM_Ena bit asign ------------------------------------------------------- */ |
| #define CAM_ENTRY_MAX 21 /* CAM Data entry max count */ |
| #define CAM_Ena_Mask ((1<<CAM_ENTRY_MAX)-1) /* CAM Enable bits (Max 21bits) */ |
| #define CAM_Ena_Bit(index) (1<<(index)) |
| #define CAM_ENTRY_DESTINATION 0 |
| #define CAM_ENTRY_SOURCE 1 |
| #define CAM_ENTRY_MACCTL 20 |
| |
| /* Tx_Ctl bit asign -------------------------------------------------------- */ |
| #define Tx_En 0x00000001 /* 1:Transmit enable */ |
| #define Tx_TxHalt 0x00000002 /* 1:Transmit Halt Request */ |
| #define Tx_NoPad 0x00000004 /* 1:Suppress Padding */ |
| #define Tx_NoCRC 0x00000008 /* 1:Suppress Padding */ |
| #define Tx_FBack 0x00000010 /* 1:Fast Back-off */ |
| #define Tx_EnUnder 0x00000100 /* 1:Enable Underrun */ |
| #define Tx_EnExDefer 0x00000200 /* 1:Enable Excessive Deferral */ |
| #define Tx_EnLCarr 0x00000400 /* 1:Enable Lost Carrier */ |
| #define Tx_EnExColl 0x00000800 /* 1:Enable Excessive Collision */ |
| #define Tx_EnLateColl 0x00001000 /* 1:Enable Late Collision */ |
| #define Tx_EnTxPar 0x00002000 /* 1:Enable Transmit Parity */ |
| #define Tx_EnComp 0x00004000 /* 1:Enable Completion */ |
| |
| /* Tx_Stat bit asign ------------------------------------------------------- */ |
| #define Tx_TxColl_MASK 0x0000000F /* Tx Collision Count */ |
| #define Tx_ExColl 0x00000010 /* Excessive Collision */ |
| #define Tx_TXDefer 0x00000020 /* Transmit Defered */ |
| #define Tx_Paused 0x00000040 /* Transmit Paused */ |
| #define Tx_IntTx 0x00000080 /* Interrupt on Tx */ |
| #define Tx_Under 0x00000100 /* Underrun */ |
| #define Tx_Defer 0x00000200 /* Deferral */ |
| #define Tx_NCarr 0x00000400 /* No Carrier */ |
| #define Tx_10Stat 0x00000800 /* 10Mbps Status */ |
| #define Tx_LateColl 0x00001000 /* Late Collision */ |
| #define Tx_TxPar 0x00002000 /* Tx Parity Error */ |
| #define Tx_Comp 0x00004000 /* Completion */ |
| #define Tx_Halted 0x00008000 /* Tx Halted */ |
| #define Tx_SQErr 0x00010000 /* Signal Quality Error(SQE) */ |
| |
| /* Rx_Ctl bit asign -------------------------------------------------------- */ |
| #define Rx_EnGood 0x00004000 /* 1:Enable Good */ |
| #define Rx_EnRxPar 0x00002000 /* 1:Enable Receive Parity */ |
| #define Rx_EnLongErr 0x00000800 /* 1:Enable Long Error */ |
| #define Rx_EnOver 0x00000400 /* 1:Enable OverFlow */ |
| #define Rx_EnCRCErr 0x00000200 /* 1:Enable CRC Error */ |
| #define Rx_EnAlign 0x00000100 /* 1:Enable Alignment */ |
| #define Rx_IgnoreCRC 0x00000040 /* 1:Ignore CRC Value */ |
| #define Rx_StripCRC 0x00000010 /* 1:Strip CRC Value */ |
| #define Rx_ShortEn 0x00000008 /* 1:Short Enable */ |
| #define Rx_LongEn 0x00000004 /* 1:Long Enable */ |
| #define Rx_RxHalt 0x00000002 /* 1:Receive Halt Request */ |
| #define Rx_RxEn 0x00000001 /* 1:Receive Intrrupt Enable */ |
| |
| /* Rx_Stat bit asign ------------------------------------------------------- */ |
| #define Rx_Halted 0x00008000 /* Rx Halted */ |
| #define Rx_Good 0x00004000 /* Rx Good */ |
| #define Rx_RxPar 0x00002000 /* Rx Parity Error */ |
| /* 0x00001000 not use */ |
| #define Rx_LongErr 0x00000800 /* Rx Long Error */ |
| #define Rx_Over 0x00000400 /* Rx Overflow */ |
| #define Rx_CRCErr 0x00000200 /* Rx CRC Error */ |
| #define Rx_Align 0x00000100 /* Rx Alignment Error */ |
| #define Rx_10Stat 0x00000080 /* Rx 10Mbps Status */ |
| #define Rx_IntRx 0x00000040 /* Rx Interrupt */ |
| #define Rx_CtlRecd 0x00000020 /* Rx Control Receive */ |
| |
| #define Rx_Stat_Mask 0x0000EFC0 /* Rx All Status Mask */ |
| |
| /* Int_En bit asign -------------------------------------------------------- */ |
| #define Int_NRAbtEn 0x00000800 /* 1:Non-recoverable Abort Enable */ |
| #define Int_TxCtlCmpEn 0x00000400 /* 1:Transmit Control Complete Enable */ |
| #define Int_DmParErrEn 0x00000200 /* 1:DMA Parity Error Enable */ |
| #define Int_DParDEn 0x00000100 /* 1:Data Parity Error Enable */ |
| #define Int_EarNotEn 0x00000080 /* 1:Early Notify Enable */ |
| #define Int_DParErrEn 0x00000040 /* 1:Detected Parity Error Enable */ |
| #define Int_SSysErrEn 0x00000020 /* 1:Signalled System Error Enable */ |
| #define Int_RMasAbtEn 0x00000010 /* 1:Received Master Abort Enable */ |
| #define Int_RTargAbtEn 0x00000008 /* 1:Received Target Abort Enable */ |
| #define Int_STargAbtEn 0x00000004 /* 1:Signalled Target Abort Enable */ |
| #define Int_BLExEn 0x00000002 /* 1:Buffer List Exhausted Enable */ |
| #define Int_FDAExEn 0x00000001 /* 1:Free Descriptor Area */ |
| /* Exhausted Enable */ |
| |
| /* Int_Src bit asign ------------------------------------------------------- */ |
| #define Int_NRabt 0x00004000 /* 1:Non Recoverable error */ |
| #define Int_DmParErrStat 0x00002000 /* 1:DMA Parity Error & Clear */ |
| #define Int_BLEx 0x00001000 /* 1:Buffer List Empty & Clear */ |
| #define Int_FDAEx 0x00000800 /* 1:FDA Empty & Clear */ |
| #define Int_IntNRAbt 0x00000400 /* 1:Non Recoverable Abort */ |
| #define Int_IntCmp 0x00000200 /* 1:MAC control packet complete */ |
| #define Int_IntExBD 0x00000100 /* 1:Interrupt Extra BD & Clear */ |
| #define Int_DmParErr 0x00000080 /* 1:DMA Parity Error & Clear */ |
| #define Int_IntEarNot 0x00000040 /* 1:Receive Data write & Clear */ |
| #define Int_SWInt 0x00000020 /* 1:Software request & Clear */ |
| #define Int_IntBLEx 0x00000010 /* 1:Buffer List Empty & Clear */ |
| #define Int_IntFDAEx 0x00000008 /* 1:FDA Empty & Clear */ |
| #define Int_IntPCI 0x00000004 /* 1:PCI controller & Clear */ |
| #define Int_IntMacRx 0x00000002 /* 1:Rx controller & Clear */ |
| #define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */ |
| |
| /* MD_CA bit asign --------------------------------------------------------- */ |
| #define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */ |
| #define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */ |
| #define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */ |
| |
| |
| /* |
| * Descriptors |
| */ |
| |
| /* Frame descripter */ |
| struct FDesc { |
| volatile __u32 FDNext; |
| volatile __u32 FDSystem; |
| volatile __u32 FDStat; |
| volatile __u32 FDCtl; |
| }; |
| |
| /* Buffer descripter */ |
| struct BDesc { |
| volatile __u32 BuffData; |
| volatile __u32 BDCtl; |
| }; |
| |
| #define FD_ALIGN 16 |
| |
| /* Frame Descripter bit asign ---------------------------------------------- */ |
| #define FD_FDLength_MASK 0x0000FFFF /* Length MASK */ |
| #define FD_BDCnt_MASK 0x001F0000 /* BD count MASK in FD */ |
| #define FD_FrmOpt_MASK 0x7C000000 /* Frame option MASK */ |
| #define FD_FrmOpt_BigEndian 0x40000000 /* Tx/Rx */ |
| #define FD_FrmOpt_IntTx 0x20000000 /* Tx only */ |
| #define FD_FrmOpt_NoCRC 0x10000000 /* Tx only */ |
| #define FD_FrmOpt_NoPadding 0x08000000 /* Tx only */ |
| #define FD_FrmOpt_Packing 0x04000000 /* Rx only */ |
| #define FD_CownsFD 0x80000000 /* FD Controller owner bit */ |
| #define FD_Next_EOL 0x00000001 /* FD EOL indicator */ |
| #define FD_BDCnt_SHIFT 16 |
| |
| /* Buffer Descripter bit asign --------------------------------------------- */ |
| #define BD_BuffLength_MASK 0x0000FFFF /* Recieve Data Size */ |
| #define BD_RxBDID_MASK 0x00FF0000 /* BD ID Number MASK */ |
| #define BD_RxBDSeqN_MASK 0x7F000000 /* Rx BD Sequence Number */ |
| #define BD_CownsBD 0x80000000 /* BD Controller owner bit */ |
| #define BD_RxBDID_SHIFT 16 |
| #define BD_RxBDSeqN_SHIFT 24 |
| |
| |
| /* Some useful constants. */ |
| #undef NO_CHECK_CARRIER /* Does not check No-Carrier with TP */ |
| |
| #ifdef NO_CHECK_CARRIER |
| #define TX_CTL_CMD (Tx_EnComp | Tx_EnTxPar | Tx_EnLateColl | \ |
| Tx_EnExColl | Tx_EnExDefer | Tx_EnUnder | \ |
| Tx_En) /* maybe 0x7b01 */ |
| #else |
| #define TX_CTL_CMD (Tx_EnComp | Tx_EnTxPar | Tx_EnLateColl | \ |
| Tx_EnExColl | Tx_EnLCarr | Tx_EnExDefer | Tx_EnUnder | \ |
| Tx_En) /* maybe 0x7b01 */ |
| #endif |
| #define RX_CTL_CMD (Rx_EnGood | Rx_EnRxPar | Rx_EnLongErr | Rx_EnOver \ |
| | Rx_EnCRCErr | Rx_EnAlign | Rx_RxEn) /* maybe 0x6f01 */ |
| #define INT_EN_CMD (Int_NRAbtEn | \ |
| Int_DmParErrEn | Int_DParDEn | Int_DParErrEn | \ |
| Int_SSysErrEn | Int_RMasAbtEn | Int_RTargAbtEn | \ |
| Int_STargAbtEn | \ |
| Int_BLExEn | Int_FDAExEn) /* maybe 0xb7f*/ |
| #define DMA_CTL_CMD DMA_BURST_SIZE |
| #define HAVE_DMA_RXALIGN(lp) likely((lp)->boardtype != TC35815CF) |
| |
| /* Tuning parameters */ |
| #define DMA_BURST_SIZE 32 |
| #define TX_THRESHOLD 1024 |
| #define TX_THRESHOLD_MAX 1536 /* used threshold with packet max byte for low pci transfer ability.*/ |
| #define TX_THRESHOLD_KEEP_LIMIT 10 /* setting threshold max value when overrun error occured this count. */ |
| |
| /* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */ |
| #ifdef TC35815_USE_PACKEDBUFFER |
| #define FD_PAGE_NUM 2 |
| #define RX_BUF_NUM 8 /* >= 2 */ |
| #define RX_FD_NUM 250 /* >= 32 */ |
| #define TX_FD_NUM 128 |
| #define RX_BUF_SIZE PAGE_SIZE |
| #else /* TC35815_USE_PACKEDBUFFER */ |
| #define FD_PAGE_NUM 4 |
| #define RX_BUF_NUM 128 /* < 256 */ |
| #define RX_FD_NUM 256 /* >= 32 */ |
| #define TX_FD_NUM 128 |
| #if RX_CTL_CMD & Rx_LongEn |
| #define RX_BUF_SIZE PAGE_SIZE |
| #elif RX_CTL_CMD & Rx_StripCRC |
| #define RX_BUF_SIZE ALIGN(ETH_FRAME_LEN + 4 + 2, 32) /* +2: reserve */ |
| #else |
| #define RX_BUF_SIZE ALIGN(ETH_FRAME_LEN + 2, 32) /* +2: reserve */ |
| #endif |
| #endif /* TC35815_USE_PACKEDBUFFER */ |
| #define RX_FD_RESERVE (2 / 2) /* max 2 BD per RxFD */ |
| #define NAPI_WEIGHT 16 |
| |
| struct TxFD { |
| struct FDesc fd; |
| struct BDesc bd; |
| struct BDesc unused; |
| }; |
| |
| struct RxFD { |
| struct FDesc fd; |
| struct BDesc bd[0]; /* variable length */ |
| }; |
| |
| struct FrFD { |
| struct FDesc fd; |
| struct BDesc bd[RX_BUF_NUM]; |
| }; |
| |
| |
| #define tc_readl(addr) readl(addr) |
| #define tc_writel(d, addr) writel(d, addr) |
| |
| #define TC35815_TX_TIMEOUT msecs_to_jiffies(400) |
| |
| /* Timer state engine. */ |
| enum tc35815_timer_state { |
| arbwait = 0, /* Waiting for auto negotiation to complete. */ |
| lupwait = 1, /* Auto-neg complete, awaiting link-up status. */ |
| ltrywait = 2, /* Forcing try of all modes, from fastest to slowest. */ |
| asleep = 3, /* Time inactive. */ |
| lcheck = 4, /* Check link status. */ |
| }; |
| |
| /* Information that need to be kept for each board. */ |
| struct tc35815_local { |
| struct pci_dev *pci_dev; |
| |
| struct net_device *dev; |
| struct napi_struct napi; |
| |
| /* statistics */ |
| struct net_device_stats stats; |
| struct { |
| int max_tx_qlen; |
| int tx_ints; |
| int rx_ints; |
| int tx_underrun; |
| } lstats; |
| |
| /* Tx control lock. This protects the transmit buffer ring |
| * state along with the "tx full" state of the driver. This |
| * means all netif_queue flow control actions are protected |
| * by this lock as well. |
| */ |
| spinlock_t lock; |
| |
| int phy_addr; |
| int fullduplex; |
| unsigned short saved_lpa; |
| struct timer_list timer; |
| enum tc35815_timer_state timer_state; /* State of auto-neg timer. */ |
| unsigned int timer_ticks; /* Number of clicks at each state */ |
| |
| /* |
| * Transmitting: Batch Mode. |
| * 1 BD in 1 TxFD. |
| * Receiving: Packing Mode. (TC35815_USE_PACKEDBUFFER) |
| * 1 circular FD for Free Buffer List. |
| * RX_BUF_NUM BD in Free Buffer FD. |
| * One Free Buffer BD has PAGE_SIZE data buffer. |
| * Or Non-Packing Mode. |
| * 1 circular FD for Free Buffer List. |
| * RX_BUF_NUM BD in Free Buffer FD. |
| * One Free Buffer BD has ETH_FRAME_LEN data buffer. |
| */ |
| void * fd_buf; /* for TxFD, RxFD, FrFD */ |
| dma_addr_t fd_buf_dma; |
| struct TxFD *tfd_base; |
| unsigned int tfd_start; |
| unsigned int tfd_end; |
| struct RxFD *rfd_base; |
| struct RxFD *rfd_limit; |
| struct RxFD *rfd_cur; |
| struct FrFD *fbl_ptr; |
| #ifdef TC35815_USE_PACKEDBUFFER |
| unsigned char fbl_curid; |
| void * data_buf[RX_BUF_NUM]; /* packing */ |
| dma_addr_t data_buf_dma[RX_BUF_NUM]; |
| struct { |
| struct sk_buff *skb; |
| dma_addr_t skb_dma; |
| } tx_skbs[TX_FD_NUM]; |
| #else |
| unsigned int fbl_count; |
| struct { |
| struct sk_buff *skb; |
| dma_addr_t skb_dma; |
| } tx_skbs[TX_FD_NUM], rx_skbs[RX_BUF_NUM]; |
| #endif |
| struct mii_if_info mii; |
| unsigned short mii_id[2]; |
| u32 msg_enable; |
| board_t boardtype; |
| }; |
| |
| static inline dma_addr_t fd_virt_to_bus(struct tc35815_local *lp, void *virt) |
| { |
| return lp->fd_buf_dma + ((u8 *)virt - (u8 *)lp->fd_buf); |
| } |
| #ifdef DEBUG |
| static inline void *fd_bus_to_virt(struct tc35815_local *lp, dma_addr_t bus) |
| { |
| return (void *)((u8 *)lp->fd_buf + (bus - lp->fd_buf_dma)); |
| } |
| #endif |
| #ifdef TC35815_USE_PACKEDBUFFER |
| static inline void *rxbuf_bus_to_virt(struct tc35815_local *lp, dma_addr_t bus) |
| { |
| int i; |
| for (i = 0; i < RX_BUF_NUM; i++) { |
| if (bus >= lp->data_buf_dma[i] && |
| bus < lp->data_buf_dma[i] + PAGE_SIZE) |
| return (void *)((u8 *)lp->data_buf[i] + |
| (bus - lp->data_buf_dma[i])); |
| } |
| return NULL; |
| } |
| |
| #define TC35815_DMA_SYNC_ONDEMAND |
| static void* alloc_rxbuf_page(struct pci_dev *hwdev, dma_addr_t *dma_handle) |
| { |
| #ifdef TC35815_DMA_SYNC_ONDEMAND |
| void *buf; |
| /* pci_map + pci_dma_sync will be more effective than |
| * pci_alloc_consistent on some archs. */ |
| if ((buf = (void *)__get_free_page(GFP_ATOMIC)) == NULL) |
| return NULL; |
| *dma_handle = pci_map_single(hwdev, buf, PAGE_SIZE, |
| PCI_DMA_FROMDEVICE); |
| if (pci_dma_mapping_error(*dma_handle)) { |
| free_page((unsigned long)buf); |
| return NULL; |
| } |
| return buf; |
| #else |
| return pci_alloc_consistent(hwdev, PAGE_SIZE, dma_handle); |
| #endif |
| } |
| |
| static void free_rxbuf_page(struct pci_dev *hwdev, void *buf, dma_addr_t dma_handle) |
| { |
| #ifdef TC35815_DMA_SYNC_ONDEMAND |
| pci_unmap_single(hwdev, dma_handle, PAGE_SIZE, PCI_DMA_FROMDEVICE); |
| free_page((unsigned long)buf); |
| #else |
| pci_free_consistent(hwdev, PAGE_SIZE, buf, dma_handle); |
| #endif |
| } |
| #else /* TC35815_USE_PACKEDBUFFER */ |
| static struct sk_buff *alloc_rxbuf_skb(struct net_device *dev, |
| struct pci_dev *hwdev, |
| dma_addr_t *dma_handle) |
| { |
| struct sk_buff *skb; |
| skb = dev_alloc_skb(RX_BUF_SIZE); |
| if (!skb) |
| return NULL; |
| *dma_handle = pci_map_single(hwdev, skb->data, RX_BUF_SIZE, |
| PCI_DMA_FROMDEVICE); |
| if (pci_dma_mapping_error(*dma_handle)) { |
| dev_kfree_skb_any(skb); |
| return NULL; |
| } |
| skb_reserve(skb, 2); /* make IP header 4byte aligned */ |
| return skb; |
| } |
| |
| static void free_rxbuf_skb(struct pci_dev *hwdev, struct sk_buff *skb, dma_addr_t dma_handle) |
| { |
| pci_unmap_single(hwdev, dma_handle, RX_BUF_SIZE, |
| PCI_DMA_FROMDEVICE); |
| dev_kfree_skb_any(skb); |
| } |
| #endif /* TC35815_USE_PACKEDBUFFER */ |
| |
| /* Index to functions, as function prototypes. */ |
| |
| static int tc35815_open(struct net_device *dev); |
| static int tc35815_send_packet(struct sk_buff *skb, struct net_device *dev); |
| static irqreturn_t tc35815_interrupt(int irq, void *dev_id); |
| #ifdef TC35815_NAPI |
| static int tc35815_rx(struct net_device *dev, int limit); |
| static int tc35815_poll(struct napi_struct *napi, int budget); |
| #else |
| static void tc35815_rx(struct net_device *dev); |
| #endif |
| static void tc35815_txdone(struct net_device *dev); |
| static int tc35815_close(struct net_device *dev); |
| static struct net_device_stats *tc35815_get_stats(struct net_device *dev); |
| static void tc35815_set_multicast_list(struct net_device *dev); |
| static void tc35815_tx_timeout(struct net_device *dev); |
| static int tc35815_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void tc35815_poll_controller(struct net_device *dev); |
| #endif |
| static const struct ethtool_ops tc35815_ethtool_ops; |
| |
| /* Example routines you must write ;->. */ |
| static void tc35815_chip_reset(struct net_device *dev); |
| static void tc35815_chip_init(struct net_device *dev); |
| static void tc35815_find_phy(struct net_device *dev); |
| static void tc35815_phy_chip_init(struct net_device *dev); |
| |
| #ifdef DEBUG |
| static void panic_queues(struct net_device *dev); |
| #endif |
| |
| static void tc35815_timer(unsigned long data); |
| static void tc35815_start_auto_negotiation(struct net_device *dev, |
| struct ethtool_cmd *ep); |
| static int tc_mdio_read(struct net_device *dev, int phy_id, int location); |
| static void tc_mdio_write(struct net_device *dev, int phy_id, int location, |
| int val); |
| |
| #ifdef CONFIG_CPU_TX49XX |
| /* |
| * Find a platform_device providing a MAC address. The platform code |
| * should provide a "tc35815-mac" device with a MAC address in its |
| * platform_data. |
| */ |
| static int __devinit tc35815_mac_match(struct device *dev, void *data) |
| { |
| struct platform_device *plat_dev = to_platform_device(dev); |
| struct pci_dev *pci_dev = data; |
| unsigned int id = (pci_dev->bus->number << 8) | pci_dev->devfn; |
| return !strcmp(plat_dev->name, "tc35815-mac") && plat_dev->id == id; |
| } |
| |
| static int __devinit tc35815_read_plat_dev_addr(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| struct device *pd = bus_find_device(&platform_bus_type, NULL, |
| lp->pci_dev, tc35815_mac_match); |
| if (pd) { |
| if (pd->platform_data) |
| memcpy(dev->dev_addr, pd->platform_data, ETH_ALEN); |
| put_device(pd); |
| return is_valid_ether_addr(dev->dev_addr) ? 0 : -ENODEV; |
| } |
| return -ENODEV; |
| } |
| #else |
| static int __devinit tc35815_read_plat_dev_addr(struct net_device *dev) |
| { |
| return -ENODEV; |
| } |
| #endif |
| |
| static int __devinit tc35815_init_dev_addr (struct net_device *dev) |
| { |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| int i; |
| |
| while (tc_readl(&tr->PROM_Ctl) & PROM_Busy) |
| ; |
| for (i = 0; i < 6; i += 2) { |
| unsigned short data; |
| tc_writel(PROM_Busy | PROM_Read | (i / 2 + 2), &tr->PROM_Ctl); |
| while (tc_readl(&tr->PROM_Ctl) & PROM_Busy) |
| ; |
| data = tc_readl(&tr->PROM_Data); |
| dev->dev_addr[i] = data & 0xff; |
| dev->dev_addr[i+1] = data >> 8; |
| } |
| if (!is_valid_ether_addr(dev->dev_addr)) |
| return tc35815_read_plat_dev_addr(dev); |
| return 0; |
| } |
| |
| static int __devinit tc35815_init_one (struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| void __iomem *ioaddr = NULL; |
| struct net_device *dev; |
| struct tc35815_local *lp; |
| int rc; |
| unsigned long mmio_start, mmio_end, mmio_flags, mmio_len; |
| |
| static int printed_version; |
| if (!printed_version++) { |
| printk(version); |
| dev_printk(KERN_DEBUG, &pdev->dev, |
| "speed:%d duplex:%d doforce:%d\n", |
| options.speed, options.duplex, options.doforce); |
| } |
| |
| if (!pdev->irq) { |
| dev_warn(&pdev->dev, "no IRQ assigned.\n"); |
| return -ENODEV; |
| } |
| |
| /* dev zeroed in alloc_etherdev */ |
| dev = alloc_etherdev (sizeof (*lp)); |
| if (dev == NULL) { |
| dev_err(&pdev->dev, "unable to alloc new ethernet\n"); |
| return -ENOMEM; |
| } |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| lp = dev->priv; |
| lp->dev = dev; |
| |
| /* enable device (incl. PCI PM wakeup), and bus-mastering */ |
| rc = pci_enable_device (pdev); |
| if (rc) |
| goto err_out; |
| |
| mmio_start = pci_resource_start (pdev, 1); |
| mmio_end = pci_resource_end (pdev, 1); |
| mmio_flags = pci_resource_flags (pdev, 1); |
| mmio_len = pci_resource_len (pdev, 1); |
| |
| /* set this immediately, we need to know before |
| * we talk to the chip directly */ |
| |
| /* make sure PCI base addr 1 is MMIO */ |
| if (!(mmio_flags & IORESOURCE_MEM)) { |
| dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n"); |
| rc = -ENODEV; |
| goto err_out; |
| } |
| |
| /* check for weird/broken PCI region reporting */ |
| if ((mmio_len < sizeof(struct tc35815_regs))) { |
| dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n"); |
| rc = -ENODEV; |
| goto err_out; |
| } |
| |
| rc = pci_request_regions (pdev, MODNAME); |
| if (rc) |
| goto err_out; |
| |
| pci_set_master (pdev); |
| |
| /* ioremap MMIO region */ |
| ioaddr = ioremap (mmio_start, mmio_len); |
| if (ioaddr == NULL) { |
| dev_err(&pdev->dev, "cannot remap MMIO, aborting\n"); |
| rc = -EIO; |
| goto err_out_free_res; |
| } |
| |
| /* Initialize the device structure. */ |
| dev->open = tc35815_open; |
| dev->hard_start_xmit = tc35815_send_packet; |
| dev->stop = tc35815_close; |
| dev->get_stats = tc35815_get_stats; |
| dev->set_multicast_list = tc35815_set_multicast_list; |
| dev->do_ioctl = tc35815_ioctl; |
| dev->ethtool_ops = &tc35815_ethtool_ops; |
| dev->tx_timeout = tc35815_tx_timeout; |
| dev->watchdog_timeo = TC35815_TX_TIMEOUT; |
| #ifdef TC35815_NAPI |
| netif_napi_add(dev, &lp->napi, tc35815_poll, NAPI_WEIGHT); |
| #endif |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| dev->poll_controller = tc35815_poll_controller; |
| #endif |
| |
| dev->irq = pdev->irq; |
| dev->base_addr = (unsigned long) ioaddr; |
| |
| spin_lock_init(&lp->lock); |
| lp->pci_dev = pdev; |
| lp->boardtype = ent->driver_data; |
| |
| lp->msg_enable = NETIF_MSG_TX_ERR | NETIF_MSG_HW | NETIF_MSG_DRV | NETIF_MSG_LINK; |
| pci_set_drvdata(pdev, dev); |
| |
| /* Soft reset the chip. */ |
| tc35815_chip_reset(dev); |
| |
| /* Retrieve the ethernet address. */ |
| if (tc35815_init_dev_addr(dev)) { |
| dev_warn(&pdev->dev, "not valid ether addr\n"); |
| random_ether_addr(dev->dev_addr); |
| } |
| |
| rc = register_netdev (dev); |
| if (rc) |
| goto err_out_unmap; |
| |
| memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); |
| printk(KERN_INFO "%s: %s at 0x%lx, " |
| "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " |
| "IRQ %d\n", |
| dev->name, |
| board_info[ent->driver_data].name, |
| dev->base_addr, |
| dev->dev_addr[0], dev->dev_addr[1], |
| dev->dev_addr[2], dev->dev_addr[3], |
| dev->dev_addr[4], dev->dev_addr[5], |
| dev->irq); |
| |
| setup_timer(&lp->timer, tc35815_timer, (unsigned long) dev); |
| lp->mii.dev = dev; |
| lp->mii.mdio_read = tc_mdio_read; |
| lp->mii.mdio_write = tc_mdio_write; |
| lp->mii.phy_id_mask = 0x1f; |
| lp->mii.reg_num_mask = 0x1f; |
| tc35815_find_phy(dev); |
| lp->mii.phy_id = lp->phy_addr; |
| lp->mii.full_duplex = 0; |
| lp->mii.force_media = 0; |
| |
| return 0; |
| |
| err_out_unmap: |
| iounmap(ioaddr); |
| err_out_free_res: |
| pci_release_regions (pdev); |
| err_out: |
| free_netdev (dev); |
| return rc; |
| } |
| |
| |
| static void __devexit tc35815_remove_one (struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata (pdev); |
| unsigned long mmio_addr; |
| |
| mmio_addr = dev->base_addr; |
| |
| unregister_netdev (dev); |
| |
| if (mmio_addr) { |
| iounmap ((void __iomem *)mmio_addr); |
| pci_release_regions (pdev); |
| } |
| |
| free_netdev (dev); |
| |
| pci_set_drvdata (pdev, NULL); |
| } |
| |
| static int |
| tc35815_init_queues(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int i; |
| unsigned long fd_addr; |
| |
| if (!lp->fd_buf) { |
| BUG_ON(sizeof(struct FDesc) + |
| sizeof(struct BDesc) * RX_BUF_NUM + |
| sizeof(struct FDesc) * RX_FD_NUM + |
| sizeof(struct TxFD) * TX_FD_NUM > |
| PAGE_SIZE * FD_PAGE_NUM); |
| |
| if ((lp->fd_buf = pci_alloc_consistent(lp->pci_dev, PAGE_SIZE * FD_PAGE_NUM, &lp->fd_buf_dma)) == 0) |
| return -ENOMEM; |
| for (i = 0; i < RX_BUF_NUM; i++) { |
| #ifdef TC35815_USE_PACKEDBUFFER |
| if ((lp->data_buf[i] = alloc_rxbuf_page(lp->pci_dev, &lp->data_buf_dma[i])) == NULL) { |
| while (--i >= 0) { |
| free_rxbuf_page(lp->pci_dev, |
| lp->data_buf[i], |
| lp->data_buf_dma[i]); |
| lp->data_buf[i] = NULL; |
| } |
| pci_free_consistent(lp->pci_dev, |
| PAGE_SIZE * FD_PAGE_NUM, |
| lp->fd_buf, |
| lp->fd_buf_dma); |
| lp->fd_buf = NULL; |
| return -ENOMEM; |
| } |
| #else |
| lp->rx_skbs[i].skb = |
| alloc_rxbuf_skb(dev, lp->pci_dev, |
| &lp->rx_skbs[i].skb_dma); |
| if (!lp->rx_skbs[i].skb) { |
| while (--i >= 0) { |
| free_rxbuf_skb(lp->pci_dev, |
| lp->rx_skbs[i].skb, |
| lp->rx_skbs[i].skb_dma); |
| lp->rx_skbs[i].skb = NULL; |
| } |
| pci_free_consistent(lp->pci_dev, |
| PAGE_SIZE * FD_PAGE_NUM, |
| lp->fd_buf, |
| lp->fd_buf_dma); |
| lp->fd_buf = NULL; |
| return -ENOMEM; |
| } |
| #endif |
| } |
| printk(KERN_DEBUG "%s: FD buf %p DataBuf", |
| dev->name, lp->fd_buf); |
| #ifdef TC35815_USE_PACKEDBUFFER |
| printk(" DataBuf"); |
| for (i = 0; i < RX_BUF_NUM; i++) |
| printk(" %p", lp->data_buf[i]); |
| #endif |
| printk("\n"); |
| } else { |
| for (i = 0; i < FD_PAGE_NUM; i++) { |
| clear_page((void *)((unsigned long)lp->fd_buf + i * PAGE_SIZE)); |
| } |
| } |
| fd_addr = (unsigned long)lp->fd_buf; |
| |
| /* Free Descriptors (for Receive) */ |
| lp->rfd_base = (struct RxFD *)fd_addr; |
| fd_addr += sizeof(struct RxFD) * RX_FD_NUM; |
| for (i = 0; i < RX_FD_NUM; i++) { |
| lp->rfd_base[i].fd.FDCtl = cpu_to_le32(FD_CownsFD); |
| } |
| lp->rfd_cur = lp->rfd_base; |
| lp->rfd_limit = (struct RxFD *)fd_addr - (RX_FD_RESERVE + 1); |
| |
| /* Transmit Descriptors */ |
| lp->tfd_base = (struct TxFD *)fd_addr; |
| fd_addr += sizeof(struct TxFD) * TX_FD_NUM; |
| for (i = 0; i < TX_FD_NUM; i++) { |
| lp->tfd_base[i].fd.FDNext = cpu_to_le32(fd_virt_to_bus(lp, &lp->tfd_base[i+1])); |
| lp->tfd_base[i].fd.FDSystem = cpu_to_le32(0xffffffff); |
| lp->tfd_base[i].fd.FDCtl = cpu_to_le32(0); |
| } |
| lp->tfd_base[TX_FD_NUM-1].fd.FDNext = cpu_to_le32(fd_virt_to_bus(lp, &lp->tfd_base[0])); |
| lp->tfd_start = 0; |
| lp->tfd_end = 0; |
| |
| /* Buffer List (for Receive) */ |
| lp->fbl_ptr = (struct FrFD *)fd_addr; |
| lp->fbl_ptr->fd.FDNext = cpu_to_le32(fd_virt_to_bus(lp, lp->fbl_ptr)); |
| lp->fbl_ptr->fd.FDCtl = cpu_to_le32(RX_BUF_NUM | FD_CownsFD); |
| #ifndef TC35815_USE_PACKEDBUFFER |
| /* |
| * move all allocated skbs to head of rx_skbs[] array. |
| * fbl_count mighe not be RX_BUF_NUM if alloc_rxbuf_skb() in |
| * tc35815_rx() had failed. |
| */ |
| lp->fbl_count = 0; |
| for (i = 0; i < RX_BUF_NUM; i++) { |
| if (lp->rx_skbs[i].skb) { |
| if (i != lp->fbl_count) { |
| lp->rx_skbs[lp->fbl_count].skb = |
| lp->rx_skbs[i].skb; |
| lp->rx_skbs[lp->fbl_count].skb_dma = |
| lp->rx_skbs[i].skb_dma; |
| } |
| lp->fbl_count++; |
| } |
| } |
| #endif |
| for (i = 0; i < RX_BUF_NUM; i++) { |
| #ifdef TC35815_USE_PACKEDBUFFER |
| lp->fbl_ptr->bd[i].BuffData = cpu_to_le32(lp->data_buf_dma[i]); |
| #else |
| if (i >= lp->fbl_count) { |
| lp->fbl_ptr->bd[i].BuffData = 0; |
| lp->fbl_ptr->bd[i].BDCtl = 0; |
| continue; |
| } |
| lp->fbl_ptr->bd[i].BuffData = |
| cpu_to_le32(lp->rx_skbs[i].skb_dma); |
| #endif |
| /* BDID is index of FrFD.bd[] */ |
| lp->fbl_ptr->bd[i].BDCtl = |
| cpu_to_le32(BD_CownsBD | (i << BD_RxBDID_SHIFT) | |
| RX_BUF_SIZE); |
| } |
| #ifdef TC35815_USE_PACKEDBUFFER |
| lp->fbl_curid = 0; |
| #endif |
| |
| printk(KERN_DEBUG "%s: TxFD %p RxFD %p FrFD %p\n", |
| dev->name, lp->tfd_base, lp->rfd_base, lp->fbl_ptr); |
| return 0; |
| } |
| |
| static void |
| tc35815_clear_queues(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int i; |
| |
| for (i = 0; i < TX_FD_NUM; i++) { |
| u32 fdsystem = le32_to_cpu(lp->tfd_base[i].fd.FDSystem); |
| struct sk_buff *skb = |
| fdsystem != 0xffffffff ? |
| lp->tx_skbs[fdsystem].skb : NULL; |
| #ifdef DEBUG |
| if (lp->tx_skbs[i].skb != skb) { |
| printk("%s: tx_skbs mismatch(%d).\n", dev->name, i); |
| panic_queues(dev); |
| } |
| #else |
| BUG_ON(lp->tx_skbs[i].skb != skb); |
| #endif |
| if (skb) { |
| pci_unmap_single(lp->pci_dev, lp->tx_skbs[i].skb_dma, skb->len, PCI_DMA_TODEVICE); |
| lp->tx_skbs[i].skb = NULL; |
| lp->tx_skbs[i].skb_dma = 0; |
| dev_kfree_skb_any(skb); |
| } |
| lp->tfd_base[i].fd.FDSystem = cpu_to_le32(0xffffffff); |
| } |
| |
| tc35815_init_queues(dev); |
| } |
| |
| static void |
| tc35815_free_queues(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int i; |
| |
| if (lp->tfd_base) { |
| for (i = 0; i < TX_FD_NUM; i++) { |
| u32 fdsystem = le32_to_cpu(lp->tfd_base[i].fd.FDSystem); |
| struct sk_buff *skb = |
| fdsystem != 0xffffffff ? |
| lp->tx_skbs[fdsystem].skb : NULL; |
| #ifdef DEBUG |
| if (lp->tx_skbs[i].skb != skb) { |
| printk("%s: tx_skbs mismatch(%d).\n", dev->name, i); |
| panic_queues(dev); |
| } |
| #else |
| BUG_ON(lp->tx_skbs[i].skb != skb); |
| #endif |
| if (skb) { |
| dev_kfree_skb(skb); |
| pci_unmap_single(lp->pci_dev, lp->tx_skbs[i].skb_dma, skb->len, PCI_DMA_TODEVICE); |
| lp->tx_skbs[i].skb = NULL; |
| lp->tx_skbs[i].skb_dma = 0; |
| } |
| lp->tfd_base[i].fd.FDSystem = cpu_to_le32(0xffffffff); |
| } |
| } |
| |
| lp->rfd_base = NULL; |
| lp->rfd_limit = NULL; |
| lp->rfd_cur = NULL; |
| lp->fbl_ptr = NULL; |
| |
| for (i = 0; i < RX_BUF_NUM; i++) { |
| #ifdef TC35815_USE_PACKEDBUFFER |
| if (lp->data_buf[i]) { |
| free_rxbuf_page(lp->pci_dev, |
| lp->data_buf[i], lp->data_buf_dma[i]); |
| lp->data_buf[i] = NULL; |
| } |
| #else |
| if (lp->rx_skbs[i].skb) { |
| free_rxbuf_skb(lp->pci_dev, lp->rx_skbs[i].skb, |
| lp->rx_skbs[i].skb_dma); |
| lp->rx_skbs[i].skb = NULL; |
| } |
| #endif |
| } |
| if (lp->fd_buf) { |
| pci_free_consistent(lp->pci_dev, PAGE_SIZE * FD_PAGE_NUM, |
| lp->fd_buf, lp->fd_buf_dma); |
| lp->fd_buf = NULL; |
| } |
| } |
| |
| static void |
| dump_txfd(struct TxFD *fd) |
| { |
| printk("TxFD(%p): %08x %08x %08x %08x\n", fd, |
| le32_to_cpu(fd->fd.FDNext), |
| le32_to_cpu(fd->fd.FDSystem), |
| le32_to_cpu(fd->fd.FDStat), |
| le32_to_cpu(fd->fd.FDCtl)); |
| printk("BD: "); |
| printk(" %08x %08x", |
| le32_to_cpu(fd->bd.BuffData), |
| le32_to_cpu(fd->bd.BDCtl)); |
| printk("\n"); |
| } |
| |
| static int |
| dump_rxfd(struct RxFD *fd) |
| { |
| int i, bd_count = (le32_to_cpu(fd->fd.FDCtl) & FD_BDCnt_MASK) >> FD_BDCnt_SHIFT; |
| if (bd_count > 8) |
| bd_count = 8; |
| printk("RxFD(%p): %08x %08x %08x %08x\n", fd, |
| le32_to_cpu(fd->fd.FDNext), |
| le32_to_cpu(fd->fd.FDSystem), |
| le32_to_cpu(fd->fd.FDStat), |
| le32_to_cpu(fd->fd.FDCtl)); |
| if (le32_to_cpu(fd->fd.FDCtl) & FD_CownsFD) |
| return 0; |
| printk("BD: "); |
| for (i = 0; i < bd_count; i++) |
| printk(" %08x %08x", |
| le32_to_cpu(fd->bd[i].BuffData), |
| le32_to_cpu(fd->bd[i].BDCtl)); |
| printk("\n"); |
| return bd_count; |
| } |
| |
| #if defined(DEBUG) || defined(TC35815_USE_PACKEDBUFFER) |
| static void |
| dump_frfd(struct FrFD *fd) |
| { |
| int i; |
| printk("FrFD(%p): %08x %08x %08x %08x\n", fd, |
| le32_to_cpu(fd->fd.FDNext), |
| le32_to_cpu(fd->fd.FDSystem), |
| le32_to_cpu(fd->fd.FDStat), |
| le32_to_cpu(fd->fd.FDCtl)); |
| printk("BD: "); |
| for (i = 0; i < RX_BUF_NUM; i++) |
| printk(" %08x %08x", |
| le32_to_cpu(fd->bd[i].BuffData), |
| le32_to_cpu(fd->bd[i].BDCtl)); |
| printk("\n"); |
| } |
| #endif |
| |
| #ifdef DEBUG |
| static void |
| panic_queues(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int i; |
| |
| printk("TxFD base %p, start %u, end %u\n", |
| lp->tfd_base, lp->tfd_start, lp->tfd_end); |
| printk("RxFD base %p limit %p cur %p\n", |
| lp->rfd_base, lp->rfd_limit, lp->rfd_cur); |
| printk("FrFD %p\n", lp->fbl_ptr); |
| for (i = 0; i < TX_FD_NUM; i++) |
| dump_txfd(&lp->tfd_base[i]); |
| for (i = 0; i < RX_FD_NUM; i++) { |
| int bd_count = dump_rxfd(&lp->rfd_base[i]); |
| i += (bd_count + 1) / 2; /* skip BDs */ |
| } |
| dump_frfd(lp->fbl_ptr); |
| panic("%s: Illegal queue state.", dev->name); |
| } |
| #endif |
| |
| static void print_eth(char *add) |
| { |
| int i; |
| |
| printk("print_eth(%p)\n", add); |
| for (i = 0; i < 6; i++) |
| printk(" %2.2X", (unsigned char) add[i + 6]); |
| printk(" =>"); |
| for (i = 0; i < 6; i++) |
| printk(" %2.2X", (unsigned char) add[i]); |
| printk(" : %2.2X%2.2X\n", (unsigned char) add[12], (unsigned char) add[13]); |
| } |
| |
| static int tc35815_tx_full(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| return ((lp->tfd_start + 1) % TX_FD_NUM == lp->tfd_end); |
| } |
| |
| static void tc35815_restart(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int pid = lp->phy_addr; |
| int do_phy_reset = 1; |
| del_timer(&lp->timer); /* Kill if running */ |
| |
| if (lp->mii_id[0] == 0x0016 && (lp->mii_id[1] & 0xfc00) == 0xf800) { |
| /* Resetting PHY cause problem on some chip... (SEEQ 80221) */ |
| do_phy_reset = 0; |
| } |
| if (do_phy_reset) { |
| int timeout; |
| tc_mdio_write(dev, pid, MII_BMCR, BMCR_RESET); |
| timeout = 100; |
| while (--timeout) { |
| if (!(tc_mdio_read(dev, pid, MII_BMCR) & BMCR_RESET)) |
| break; |
| udelay(1); |
| } |
| if (!timeout) |
| printk(KERN_ERR "%s: BMCR reset failed.\n", dev->name); |
| } |
| |
| tc35815_chip_reset(dev); |
| tc35815_clear_queues(dev); |
| tc35815_chip_init(dev); |
| /* Reconfigure CAM again since tc35815_chip_init() initialize it. */ |
| tc35815_set_multicast_list(dev); |
| } |
| |
| static void tc35815_tx_timeout(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| |
| printk(KERN_WARNING "%s: transmit timed out, status %#x\n", |
| dev->name, tc_readl(&tr->Tx_Stat)); |
| |
| /* Try to restart the adaptor. */ |
| spin_lock_irq(&lp->lock); |
| tc35815_restart(dev); |
| spin_unlock_irq(&lp->lock); |
| |
| lp->stats.tx_errors++; |
| |
| /* If we have space available to accept new transmit |
| * requests, wake up the queueing layer. This would |
| * be the case if the chipset_init() call above just |
| * flushes out the tx queue and empties it. |
| * |
| * If instead, the tx queue is retained then the |
| * netif_wake_queue() call should be placed in the |
| * TX completion interrupt handler of the driver instead |
| * of here. |
| */ |
| if (!tc35815_tx_full(dev)) |
| netif_wake_queue(dev); |
| } |
| |
| /* |
| * Open/initialize the board. This is called (in the current kernel) |
| * sometime after booting when the 'ifconfig' program is run. |
| * |
| * This routine should set everything up anew at each open, even |
| * registers that "should" only need to be set once at boot, so that |
| * there is non-reboot way to recover if something goes wrong. |
| */ |
| static int |
| tc35815_open(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| |
| /* |
| * This is used if the interrupt line can turned off (shared). |
| * See 3c503.c for an example of selecting the IRQ at config-time. |
| */ |
| if (request_irq(dev->irq, &tc35815_interrupt, IRQF_SHARED, dev->name, dev)) { |
| return -EAGAIN; |
| } |
| |
| del_timer(&lp->timer); /* Kill if running */ |
| tc35815_chip_reset(dev); |
| |
| if (tc35815_init_queues(dev) != 0) { |
| free_irq(dev->irq, dev); |
| return -EAGAIN; |
| } |
| |
| #ifdef TC35815_NAPI |
| napi_enable(&lp->napi); |
| #endif |
| |
| /* Reset the hardware here. Don't forget to set the station address. */ |
| spin_lock_irq(&lp->lock); |
| tc35815_chip_init(dev); |
| spin_unlock_irq(&lp->lock); |
| |
| /* We are now ready to accept transmit requeusts from |
| * the queueing layer of the networking. |
| */ |
| netif_start_queue(dev); |
| |
| return 0; |
| } |
| |
| /* This will only be invoked if your driver is _not_ in XOFF state. |
| * What this means is that you need not check it, and that this |
| * invariant will hold if you make sure that the netif_*_queue() |
| * calls are done at the proper times. |
| */ |
| static int tc35815_send_packet(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| struct TxFD *txfd; |
| unsigned long flags; |
| |
| /* If some error occurs while trying to transmit this |
| * packet, you should return '1' from this function. |
| * In such a case you _may not_ do anything to the |
| * SKB, it is still owned by the network queueing |
| * layer when an error is returned. This means you |
| * may not modify any SKB fields, you may not free |
| * the SKB, etc. |
| */ |
| |
| /* This is the most common case for modern hardware. |
| * The spinlock protects this code from the TX complete |
| * hardware interrupt handler. Queue flow control is |
| * thus managed under this lock as well. |
| */ |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| /* failsafe... (handle txdone now if half of FDs are used) */ |
| if ((lp->tfd_start + TX_FD_NUM - lp->tfd_end) % TX_FD_NUM > |
| TX_FD_NUM / 2) |
| tc35815_txdone(dev); |
| |
| if (netif_msg_pktdata(lp)) |
| print_eth(skb->data); |
| #ifdef DEBUG |
| if (lp->tx_skbs[lp->tfd_start].skb) { |
| printk("%s: tx_skbs conflict.\n", dev->name); |
| panic_queues(dev); |
| } |
| #else |
| BUG_ON(lp->tx_skbs[lp->tfd_start].skb); |
| #endif |
| lp->tx_skbs[lp->tfd_start].skb = skb; |
| lp->tx_skbs[lp->tfd_start].skb_dma = pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE); |
| |
| /*add to ring */ |
| txfd = &lp->tfd_base[lp->tfd_start]; |
| txfd->bd.BuffData = cpu_to_le32(lp->tx_skbs[lp->tfd_start].skb_dma); |
| txfd->bd.BDCtl = cpu_to_le32(skb->len); |
| txfd->fd.FDSystem = cpu_to_le32(lp->tfd_start); |
| txfd->fd.FDCtl = cpu_to_le32(FD_CownsFD | (1 << FD_BDCnt_SHIFT)); |
| |
| if (lp->tfd_start == lp->tfd_end) { |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| /* Start DMA Transmitter. */ |
| txfd->fd.FDNext |= cpu_to_le32(FD_Next_EOL); |
| #ifdef GATHER_TXINT |
| txfd->fd.FDCtl |= cpu_to_le32(FD_FrmOpt_IntTx); |
| #endif |
| if (netif_msg_tx_queued(lp)) { |
| printk("%s: starting TxFD.\n", dev->name); |
| dump_txfd(txfd); |
| } |
| tc_writel(fd_virt_to_bus(lp, txfd), &tr->TxFrmPtr); |
| } else { |
| txfd->fd.FDNext &= cpu_to_le32(~FD_Next_EOL); |
| if (netif_msg_tx_queued(lp)) { |
| printk("%s: queueing TxFD.\n", dev->name); |
| dump_txfd(txfd); |
| } |
| } |
| lp->tfd_start = (lp->tfd_start + 1) % TX_FD_NUM; |
| |
| dev->trans_start = jiffies; |
| |
| /* If we just used up the very last entry in the |
| * TX ring on this device, tell the queueing |
| * layer to send no more. |
| */ |
| if (tc35815_tx_full(dev)) { |
| if (netif_msg_tx_queued(lp)) |
| printk(KERN_WARNING "%s: TxFD Exhausted.\n", dev->name); |
| netif_stop_queue(dev); |
| } |
| |
| /* When the TX completion hw interrupt arrives, this |
| * is when the transmit statistics are updated. |
| */ |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| return 0; |
| } |
| |
| #define FATAL_ERROR_INT \ |
| (Int_IntPCI | Int_DmParErr | Int_IntNRAbt) |
| static void tc35815_fatal_error_interrupt(struct net_device *dev, u32 status) |
| { |
| static int count; |
| printk(KERN_WARNING "%s: Fatal Error Intterrupt (%#x):", |
| dev->name, status); |
| if (status & Int_IntPCI) |
| printk(" IntPCI"); |
| if (status & Int_DmParErr) |
| printk(" DmParErr"); |
| if (status & Int_IntNRAbt) |
| printk(" IntNRAbt"); |
| printk("\n"); |
| if (count++ > 100) |
| panic("%s: Too many fatal errors.", dev->name); |
| printk(KERN_WARNING "%s: Resetting ...\n", dev->name); |
| /* Try to restart the adaptor. */ |
| tc35815_restart(dev); |
| } |
| |
| #ifdef TC35815_NAPI |
| static int tc35815_do_interrupt(struct net_device *dev, u32 status, int limit) |
| #else |
| static int tc35815_do_interrupt(struct net_device *dev, u32 status) |
| #endif |
| { |
| struct tc35815_local *lp = dev->priv; |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| int ret = -1; |
| |
| /* Fatal errors... */ |
| if (status & FATAL_ERROR_INT) { |
| tc35815_fatal_error_interrupt(dev, status); |
| return 0; |
| } |
| /* recoverable errors */ |
| if (status & Int_IntFDAEx) { |
| /* disable FDAEx int. (until we make rooms...) */ |
| tc_writel(tc_readl(&tr->Int_En) & ~Int_FDAExEn, &tr->Int_En); |
| printk(KERN_WARNING |
| "%s: Free Descriptor Area Exhausted (%#x).\n", |
| dev->name, status); |
| lp->stats.rx_dropped++; |
| ret = 0; |
| } |
| if (status & Int_IntBLEx) { |
| /* disable BLEx int. (until we make rooms...) */ |
| tc_writel(tc_readl(&tr->Int_En) & ~Int_BLExEn, &tr->Int_En); |
| printk(KERN_WARNING |
| "%s: Buffer List Exhausted (%#x).\n", |
| dev->name, status); |
| lp->stats.rx_dropped++; |
| ret = 0; |
| } |
| if (status & Int_IntExBD) { |
| printk(KERN_WARNING |
| "%s: Excessive Buffer Descriptiors (%#x).\n", |
| dev->name, status); |
| lp->stats.rx_length_errors++; |
| ret = 0; |
| } |
| |
| /* normal notification */ |
| if (status & Int_IntMacRx) { |
| /* Got a packet(s). */ |
| #ifdef TC35815_NAPI |
| ret = tc35815_rx(dev, limit); |
| #else |
| tc35815_rx(dev); |
| ret = 0; |
| #endif |
| lp->lstats.rx_ints++; |
| } |
| if (status & Int_IntMacTx) { |
| /* Transmit complete. */ |
| lp->lstats.tx_ints++; |
| tc35815_txdone(dev); |
| netif_wake_queue(dev); |
| ret = 0; |
| } |
| return ret; |
| } |
| |
| /* |
| * The typical workload of the driver: |
| * Handle the network interface interrupts. |
| */ |
| static irqreturn_t tc35815_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct tc35815_local *lp = netdev_priv(dev); |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| #ifdef TC35815_NAPI |
| u32 dmactl = tc_readl(&tr->DMA_Ctl); |
| |
| if (!(dmactl & DMA_IntMask)) { |
| /* disable interrupts */ |
| tc_writel(dmactl | DMA_IntMask, &tr->DMA_Ctl); |
| if (netif_rx_schedule_prep(dev, &lp->napi)) |
| __netif_rx_schedule(dev, &lp->napi); |
| else { |
| printk(KERN_ERR "%s: interrupt taken in poll\n", |
| dev->name); |
| BUG(); |
| } |
| (void)tc_readl(&tr->Int_Src); /* flush */ |
| return IRQ_HANDLED; |
| } |
| return IRQ_NONE; |
| #else |
| struct tc35815_local *lp = dev->priv; |
| int handled; |
| u32 status; |
| |
| spin_lock(&lp->lock); |
| status = tc_readl(&tr->Int_Src); |
| tc_writel(status, &tr->Int_Src); /* write to clear */ |
| handled = tc35815_do_interrupt(dev, status); |
| (void)tc_readl(&tr->Int_Src); /* flush */ |
| spin_unlock(&lp->lock); |
| return IRQ_RETVAL(handled >= 0); |
| #endif /* TC35815_NAPI */ |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void tc35815_poll_controller(struct net_device *dev) |
| { |
| disable_irq(dev->irq); |
| tc35815_interrupt(dev->irq, dev); |
| enable_irq(dev->irq); |
| } |
| #endif |
| |
| /* We have a good packet(s), get it/them out of the buffers. */ |
| #ifdef TC35815_NAPI |
| static int |
| tc35815_rx(struct net_device *dev, int limit) |
| #else |
| static void |
| tc35815_rx(struct net_device *dev) |
| #endif |
| { |
| struct tc35815_local *lp = dev->priv; |
| unsigned int fdctl; |
| int i; |
| int buf_free_count = 0; |
| int fd_free_count = 0; |
| #ifdef TC35815_NAPI |
| int received = 0; |
| #endif |
| |
| while (!((fdctl = le32_to_cpu(lp->rfd_cur->fd.FDCtl)) & FD_CownsFD)) { |
| int status = le32_to_cpu(lp->rfd_cur->fd.FDStat); |
| int pkt_len = fdctl & FD_FDLength_MASK; |
| int bd_count = (fdctl & FD_BDCnt_MASK) >> FD_BDCnt_SHIFT; |
| #ifdef DEBUG |
| struct RxFD *next_rfd; |
| #endif |
| #if (RX_CTL_CMD & Rx_StripCRC) == 0 |
| pkt_len -= 4; |
| #endif |
| |
| if (netif_msg_rx_status(lp)) |
| dump_rxfd(lp->rfd_cur); |
| if (status & Rx_Good) { |
| struct sk_buff *skb; |
| unsigned char *data; |
| int cur_bd; |
| #ifdef TC35815_USE_PACKEDBUFFER |
| int offset; |
| #endif |
| |
| #ifdef TC35815_NAPI |
| if (--limit < 0) |
| break; |
| #endif |
| #ifdef TC35815_USE_PACKEDBUFFER |
| BUG_ON(bd_count > 2); |
| skb = dev_alloc_skb(pkt_len + 2); /* +2: for reserve */ |
| if (skb == NULL) { |
| printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", |
| dev->name); |
| lp->stats.rx_dropped++; |
| break; |
| } |
| skb_reserve(skb, 2); /* 16 bit alignment */ |
| |
| data = skb_put(skb, pkt_len); |
| |
| /* copy from receive buffer */ |
| cur_bd = 0; |
| offset = 0; |
| while (offset < pkt_len && cur_bd < bd_count) { |
| int len = le32_to_cpu(lp->rfd_cur->bd[cur_bd].BDCtl) & |
| BD_BuffLength_MASK; |
| dma_addr_t dma = le32_to_cpu(lp->rfd_cur->bd[cur_bd].BuffData); |
| void *rxbuf = rxbuf_bus_to_virt(lp, dma); |
| if (offset + len > pkt_len) |
| len = pkt_len - offset; |
| #ifdef TC35815_DMA_SYNC_ONDEMAND |
| pci_dma_sync_single_for_cpu(lp->pci_dev, |
| dma, len, |
| PCI_DMA_FROMDEVICE); |
| #endif |
| memcpy(data + offset, rxbuf, len); |
| #ifdef TC35815_DMA_SYNC_ONDEMAND |
| pci_dma_sync_single_for_device(lp->pci_dev, |
| dma, len, |
| PCI_DMA_FROMDEVICE); |
| #endif |
| offset += len; |
| cur_bd++; |
| } |
| #else /* TC35815_USE_PACKEDBUFFER */ |
| BUG_ON(bd_count > 1); |
| cur_bd = (le32_to_cpu(lp->rfd_cur->bd[0].BDCtl) |
| & BD_RxBDID_MASK) >> BD_RxBDID_SHIFT; |
| #ifdef DEBUG |
| if (cur_bd >= RX_BUF_NUM) { |
| printk("%s: invalid BDID.\n", dev->name); |
| panic_queues(dev); |
| } |
| BUG_ON(lp->rx_skbs[cur_bd].skb_dma != |
| (le32_to_cpu(lp->rfd_cur->bd[0].BuffData) & ~3)); |
| if (!lp->rx_skbs[cur_bd].skb) { |
| printk("%s: NULL skb.\n", dev->name); |
| panic_queues(dev); |
| } |
| #else |
| BUG_ON(cur_bd >= RX_BUF_NUM); |
| #endif |
| skb = lp->rx_skbs[cur_bd].skb; |
| prefetch(skb->data); |
| lp->rx_skbs[cur_bd].skb = NULL; |
| lp->fbl_count--; |
| pci_unmap_single(lp->pci_dev, |
| lp->rx_skbs[cur_bd].skb_dma, |
| RX_BUF_SIZE, PCI_DMA_FROMDEVICE); |
| if (!HAVE_DMA_RXALIGN(lp)) |
| memmove(skb->data, skb->data - 2, pkt_len); |
| data = skb_put(skb, pkt_len); |
| #endif /* TC35815_USE_PACKEDBUFFER */ |
| if (netif_msg_pktdata(lp)) |
| print_eth(data); |
| skb->protocol = eth_type_trans(skb, dev); |
| #ifdef TC35815_NAPI |
| netif_receive_skb(skb); |
| received++; |
| #else |
| netif_rx(skb); |
| #endif |
| dev->last_rx = jiffies; |
| lp->stats.rx_packets++; |
| lp->stats.rx_bytes += pkt_len; |
| } else { |
| lp->stats.rx_errors++; |
| printk(KERN_DEBUG "%s: Rx error (status %x)\n", |
| dev->name, status & Rx_Stat_Mask); |
| /* WORKAROUND: LongErr and CRCErr means Overflow. */ |
| if ((status & Rx_LongErr) && (status & Rx_CRCErr)) { |
| status &= ~(Rx_LongErr|Rx_CRCErr); |
| status |= Rx_Over; |
| } |
| if (status & Rx_LongErr) lp->stats.rx_length_errors++; |
| if (status & Rx_Over) lp->stats.rx_fifo_errors++; |
| if (status & Rx_CRCErr) lp->stats.rx_crc_errors++; |
| if (status & Rx_Align) lp->stats.rx_frame_errors++; |
| } |
| |
| if (bd_count > 0) { |
| /* put Free Buffer back to controller */ |
| int bdctl = le32_to_cpu(lp->rfd_cur->bd[bd_count - 1].BDCtl); |
| unsigned char id = |
| (bdctl & BD_RxBDID_MASK) >> BD_RxBDID_SHIFT; |
| #ifdef DEBUG |
| if (id >= RX_BUF_NUM) { |
| printk("%s: invalid BDID.\n", dev->name); |
| panic_queues(dev); |
| } |
| #else |
| BUG_ON(id >= RX_BUF_NUM); |
| #endif |
| /* free old buffers */ |
| #ifdef TC35815_USE_PACKEDBUFFER |
| while (lp->fbl_curid != id) |
| #else |
| while (lp->fbl_count < RX_BUF_NUM) |
| #endif |
| { |
| #ifdef TC35815_USE_PACKEDBUFFER |
| unsigned char curid = lp->fbl_curid; |
| #else |
| unsigned char curid = |
| (id + 1 + lp->fbl_count) % RX_BUF_NUM; |
| #endif |
| struct BDesc *bd = &lp->fbl_ptr->bd[curid]; |
| #ifdef DEBUG |
| bdctl = le32_to_cpu(bd->BDCtl); |
| if (bdctl & BD_CownsBD) { |
| printk("%s: Freeing invalid BD.\n", |
| dev->name); |
| panic_queues(dev); |
| } |
| #endif |
| /* pass BD to controler */ |
| #ifndef TC35815_USE_PACKEDBUFFER |
| if (!lp->rx_skbs[curid].skb) { |
| lp->rx_skbs[curid].skb = |
| alloc_rxbuf_skb(dev, |
| lp->pci_dev, |
| &lp->rx_skbs[curid].skb_dma); |
| if (!lp->rx_skbs[curid].skb) |
| break; /* try on next reception */ |
| bd->BuffData = cpu_to_le32(lp->rx_skbs[curid].skb_dma); |
| } |
| #endif /* TC35815_USE_PACKEDBUFFER */ |
| /* Note: BDLength was modified by chip. */ |
| bd->BDCtl = cpu_to_le32(BD_CownsBD | |
| (curid << BD_RxBDID_SHIFT) | |
| RX_BUF_SIZE); |
| #ifdef TC35815_USE_PACKEDBUFFER |
| lp->fbl_curid = (curid + 1) % RX_BUF_NUM; |
| if (netif_msg_rx_status(lp)) { |
| printk("%s: Entering new FBD %d\n", |
| dev->name, lp->fbl_curid); |
| dump_frfd(lp->fbl_ptr); |
| } |
| #else |
| lp->fbl_count++; |
| #endif |
| buf_free_count++; |
| } |
| } |
| |
| /* put RxFD back to controller */ |
| #ifdef DEBUG |
| next_rfd = fd_bus_to_virt(lp, |
| le32_to_cpu(lp->rfd_cur->fd.FDNext)); |
| if (next_rfd < lp->rfd_base || next_rfd > lp->rfd_limit) { |
| printk("%s: RxFD FDNext invalid.\n", dev->name); |
| panic_queues(dev); |
| } |
| #endif |
| for (i = 0; i < (bd_count + 1) / 2 + 1; i++) { |
| /* pass FD to controler */ |
| #ifdef DEBUG |
| lp->rfd_cur->fd.FDNext = cpu_to_le32(0xdeaddead); |
| #else |
| lp->rfd_cur->fd.FDNext = cpu_to_le32(FD_Next_EOL); |
| #endif |
| lp->rfd_cur->fd.FDCtl = cpu_to_le32(FD_CownsFD); |
| lp->rfd_cur++; |
| fd_free_count++; |
| } |
| if (lp->rfd_cur > lp->rfd_limit) |
| lp->rfd_cur = lp->rfd_base; |
| #ifdef DEBUG |
| if (lp->rfd_cur != next_rfd) |
| printk("rfd_cur = %p, next_rfd %p\n", |
| lp->rfd_cur, next_rfd); |
| #endif |
| } |
| |
| /* re-enable BL/FDA Exhaust interrupts. */ |
| if (fd_free_count) { |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| u32 en, en_old = tc_readl(&tr->Int_En); |
| en = en_old | Int_FDAExEn; |
| if (buf_free_count) |
| en |= Int_BLExEn; |
| if (en != en_old) |
| tc_writel(en, &tr->Int_En); |
| } |
| #ifdef TC35815_NAPI |
| return received; |
| #endif |
| } |
| |
| #ifdef TC35815_NAPI |
| static int tc35815_poll(struct napi_struct *napi, int budget) |
| { |
| struct tc35815_local *lp = container_of(napi, struct tc35815_local, napi); |
| struct net_device *dev = lp->dev; |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| int received = 0, handled; |
| u32 status; |
| |
| spin_lock(&lp->lock); |
| status = tc_readl(&tr->Int_Src); |
| do { |
| tc_writel(status, &tr->Int_Src); /* write to clear */ |
| |
| handled = tc35815_do_interrupt(dev, status, limit); |
| if (handled >= 0) { |
| received += handled; |
| if (received >= budget) |
| break; |
| } |
| status = tc_readl(&tr->Int_Src); |
| } while (status); |
| spin_unlock(&lp->lock); |
| |
| if (received < budget) { |
| netif_rx_complete(dev, napi); |
| /* enable interrupts */ |
| tc_writel(tc_readl(&tr->DMA_Ctl) & ~DMA_IntMask, &tr->DMA_Ctl); |
| } |
| return received; |
| } |
| #endif |
| |
| #ifdef NO_CHECK_CARRIER |
| #define TX_STA_ERR (Tx_ExColl|Tx_Under|Tx_Defer|Tx_LateColl|Tx_TxPar|Tx_SQErr) |
| #else |
| #define TX_STA_ERR (Tx_ExColl|Tx_Under|Tx_Defer|Tx_NCarr|Tx_LateColl|Tx_TxPar|Tx_SQErr) |
| #endif |
| |
| static void |
| tc35815_check_tx_stat(struct net_device *dev, int status) |
| { |
| struct tc35815_local *lp = dev->priv; |
| const char *msg = NULL; |
| |
| /* count collisions */ |
| if (status & Tx_ExColl) |
| lp->stats.collisions += 16; |
| if (status & Tx_TxColl_MASK) |
| lp->stats.collisions += status & Tx_TxColl_MASK; |
| |
| #ifndef NO_CHECK_CARRIER |
| /* TX4939 does not have NCarr */ |
| if (lp->boardtype == TC35815_TX4939) |
| status &= ~Tx_NCarr; |
| #ifdef WORKAROUND_LOSTCAR |
| /* WORKAROUND: ignore LostCrS in full duplex operation */ |
| if ((lp->timer_state != asleep && lp->timer_state != lcheck) |
| || lp->fullduplex) |
| status &= ~Tx_NCarr; |
| #endif |
| #endif |
| |
| if (!(status & TX_STA_ERR)) { |
| /* no error. */ |
| lp->stats.tx_packets++; |
| return; |
| } |
| |
| lp->stats.tx_errors++; |
| if (status & Tx_ExColl) { |
| lp->stats.tx_aborted_errors++; |
| msg = "Excessive Collision."; |
| } |
| if (status & Tx_Under) { |
| lp->stats.tx_fifo_errors++; |
| msg = "Tx FIFO Underrun."; |
| if (lp->lstats.tx_underrun < TX_THRESHOLD_KEEP_LIMIT) { |
| lp->lstats.tx_underrun++; |
| if (lp->lstats.tx_underrun >= TX_THRESHOLD_KEEP_LIMIT) { |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| tc_writel(TX_THRESHOLD_MAX, &tr->TxThrsh); |
| msg = "Tx FIFO Underrun.Change Tx threshold to max."; |
| } |
| } |
| } |
| if (status & Tx_Defer) { |
| lp->stats.tx_fifo_errors++; |
| msg = "Excessive Deferral."; |
| } |
| #ifndef NO_CHECK_CARRIER |
| if (status & Tx_NCarr) { |
| lp->stats.tx_carrier_errors++; |
| msg = "Lost Carrier Sense."; |
| } |
| #endif |
| if (status & Tx_LateColl) { |
| lp->stats.tx_aborted_errors++; |
| msg = "Late Collision."; |
| } |
| if (status & Tx_TxPar) { |
| lp->stats.tx_fifo_errors++; |
| msg = "Transmit Parity Error."; |
| } |
| if (status & Tx_SQErr) { |
| lp->stats.tx_heartbeat_errors++; |
| msg = "Signal Quality Error."; |
| } |
| if (msg && netif_msg_tx_err(lp)) |
| printk(KERN_WARNING "%s: %s (%#x)\n", dev->name, msg, status); |
| } |
| |
| /* This handles TX complete events posted by the device |
| * via interrupts. |
| */ |
| static void |
| tc35815_txdone(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| struct TxFD *txfd; |
| unsigned int fdctl; |
| |
| txfd = &lp->tfd_base[lp->tfd_end]; |
| while (lp->tfd_start != lp->tfd_end && |
| !((fdctl = le32_to_cpu(txfd->fd.FDCtl)) & FD_CownsFD)) { |
| int status = le32_to_cpu(txfd->fd.FDStat); |
| struct sk_buff *skb; |
| unsigned long fdnext = le32_to_cpu(txfd->fd.FDNext); |
| u32 fdsystem = le32_to_cpu(txfd->fd.FDSystem); |
| |
| if (netif_msg_tx_done(lp)) { |
| printk("%s: complete TxFD.\n", dev->name); |
| dump_txfd(txfd); |
| } |
| tc35815_check_tx_stat(dev, status); |
| |
| skb = fdsystem != 0xffffffff ? |
| lp->tx_skbs[fdsystem].skb : NULL; |
| #ifdef DEBUG |
| if (lp->tx_skbs[lp->tfd_end].skb != skb) { |
| printk("%s: tx_skbs mismatch.\n", dev->name); |
| panic_queues(dev); |
| } |
| #else |
| BUG_ON(lp->tx_skbs[lp->tfd_end].skb != skb); |
| #endif |
| if (skb) { |
| lp->stats.tx_bytes += skb->len; |
| pci_unmap_single(lp->pci_dev, lp->tx_skbs[lp->tfd_end].skb_dma, skb->len, PCI_DMA_TODEVICE); |
| lp->tx_skbs[lp->tfd_end].skb = NULL; |
| lp->tx_skbs[lp->tfd_end].skb_dma = 0; |
| #ifdef TC35815_NAPI |
| dev_kfree_skb_any(skb); |
| #else |
| dev_kfree_skb_irq(skb); |
| #endif |
| } |
| txfd->fd.FDSystem = cpu_to_le32(0xffffffff); |
| |
| lp->tfd_end = (lp->tfd_end + 1) % TX_FD_NUM; |
| txfd = &lp->tfd_base[lp->tfd_end]; |
| #ifdef DEBUG |
| if ((fdnext & ~FD_Next_EOL) != fd_virt_to_bus(lp, txfd)) { |
| printk("%s: TxFD FDNext invalid.\n", dev->name); |
| panic_queues(dev); |
| } |
| #endif |
| if (fdnext & FD_Next_EOL) { |
| /* DMA Transmitter has been stopping... */ |
| if (lp->tfd_end != lp->tfd_start) { |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| int head = (lp->tfd_start + TX_FD_NUM - 1) % TX_FD_NUM; |
| struct TxFD* txhead = &lp->tfd_base[head]; |
| int qlen = (lp->tfd_start + TX_FD_NUM |
| - lp->tfd_end) % TX_FD_NUM; |
| |
| #ifdef DEBUG |
| if (!(le32_to_cpu(txfd->fd.FDCtl) & FD_CownsFD)) { |
| printk("%s: TxFD FDCtl invalid.\n", dev->name); |
| panic_queues(dev); |
| } |
| #endif |
| /* log max queue length */ |
| if (lp->lstats.max_tx_qlen < qlen) |
| lp->lstats.max_tx_qlen = qlen; |
| |
| |
| /* start DMA Transmitter again */ |
| txhead->fd.FDNext |= cpu_to_le32(FD_Next_EOL); |
| #ifdef GATHER_TXINT |
| txhead->fd.FDCtl |= cpu_to_le32(FD_FrmOpt_IntTx); |
| #endif |
| if (netif_msg_tx_queued(lp)) { |
| printk("%s: start TxFD on queue.\n", |
| dev->name); |
| dump_txfd(txfd); |
| } |
| tc_writel(fd_virt_to_bus(lp, txfd), &tr->TxFrmPtr); |
| } |
| break; |
| } |
| } |
| |
| /* If we had stopped the queue due to a "tx full" |
| * condition, and space has now been made available, |
| * wake up the queue. |
| */ |
| if (netif_queue_stopped(dev) && ! tc35815_tx_full(dev)) |
| netif_wake_queue(dev); |
| } |
| |
| /* The inverse routine to tc35815_open(). */ |
| static int |
| tc35815_close(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| |
| netif_stop_queue(dev); |
| #ifdef TC35815_NAPI |
| napi_disable(&lp->napi); |
| #endif |
| |
| /* Flush the Tx and disable Rx here. */ |
| |
| del_timer(&lp->timer); /* Kill if running */ |
| tc35815_chip_reset(dev); |
| free_irq(dev->irq, dev); |
| |
| tc35815_free_queues(dev); |
| |
| return 0; |
| |
| } |
| |
| /* |
| * Get the current statistics. |
| * This may be called with the card open or closed. |
| */ |
| static struct net_device_stats *tc35815_get_stats(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| if (netif_running(dev)) { |
| /* Update the statistics from the device registers. */ |
| lp->stats.rx_missed_errors = tc_readl(&tr->Miss_Cnt); |
| } |
| |
| return &lp->stats; |
| } |
| |
| static void tc35815_set_cam_entry(struct net_device *dev, int index, unsigned char *addr) |
| { |
| struct tc35815_local *lp = dev->priv; |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| int cam_index = index * 6; |
| u32 cam_data; |
| u32 saved_addr; |
| saved_addr = tc_readl(&tr->CAM_Adr); |
| |
| if (netif_msg_hw(lp)) { |
| int i; |
| printk(KERN_DEBUG "%s: CAM %d:", dev->name, index); |
| for (i = 0; i < 6; i++) |
| printk(" %02x", addr[i]); |
| printk("\n"); |
| } |
| if (index & 1) { |
| /* read modify write */ |
| tc_writel(cam_index - 2, &tr->CAM_Adr); |
| cam_data = tc_readl(&tr->CAM_Data) & 0xffff0000; |
| cam_data |= addr[0] << 8 | addr[1]; |
| tc_writel(cam_data, &tr->CAM_Data); |
| /* write whole word */ |
| tc_writel(cam_index + 2, &tr->CAM_Adr); |
| cam_data = (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) | addr[5]; |
| tc_writel(cam_data, &tr->CAM_Data); |
| } else { |
| /* write whole word */ |
| tc_writel(cam_index, &tr->CAM_Adr); |
| cam_data = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; |
| tc_writel(cam_data, &tr->CAM_Data); |
| /* read modify write */ |
| tc_writel(cam_index + 4, &tr->CAM_Adr); |
| cam_data = tc_readl(&tr->CAM_Data) & 0x0000ffff; |
| cam_data |= addr[4] << 24 | (addr[5] << 16); |
| tc_writel(cam_data, &tr->CAM_Data); |
| } |
| |
| tc_writel(saved_addr, &tr->CAM_Adr); |
| } |
| |
| |
| /* |
| * Set or clear the multicast filter for this adaptor. |
| * num_addrs == -1 Promiscuous mode, receive all packets |
| * num_addrs == 0 Normal mode, clear multicast list |
| * num_addrs > 0 Multicast mode, receive normal and MC packets, |
| * and do best-effort filtering. |
| */ |
| static void |
| tc35815_set_multicast_list(struct net_device *dev) |
| { |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| |
| if (dev->flags&IFF_PROMISC) |
| { |
| #ifdef WORKAROUND_100HALF_PROMISC |
| /* With some (all?) 100MHalf HUB, controller will hang |
| * if we enabled promiscuous mode before linkup... */ |
| struct tc35815_local *lp = dev->priv; |
| int pid = lp->phy_addr; |
| if (!(tc_mdio_read(dev, pid, MII_BMSR) & BMSR_LSTATUS)) |
| return; |
| #endif |
| /* Enable promiscuous mode */ |
| tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc | CAM_StationAcc, &tr->CAM_Ctl); |
| } |
| else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > CAM_ENTRY_MAX - 3) |
| { |
| /* CAM 0, 1, 20 are reserved. */ |
| /* Disable promiscuous mode, use normal mode. */ |
| tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc, &tr->CAM_Ctl); |
| } |
| else if(dev->mc_count) |
| { |
| struct dev_mc_list* cur_addr = dev->mc_list; |
| int i; |
| int ena_bits = CAM_Ena_Bit(CAM_ENTRY_SOURCE); |
| |
| tc_writel(0, &tr->CAM_Ctl); |
| /* Walk the address list, and load the filter */ |
| for (i = 0; i < dev->mc_count; i++, cur_addr = cur_addr->next) { |
| if (!cur_addr) |
| break; |
| /* entry 0,1 is reserved. */ |
| tc35815_set_cam_entry(dev, i + 2, cur_addr->dmi_addr); |
| ena_bits |= CAM_Ena_Bit(i + 2); |
| } |
| tc_writel(ena_bits, &tr->CAM_Ena); |
| tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl); |
| } |
| else { |
| tc_writel(CAM_Ena_Bit(CAM_ENTRY_SOURCE), &tr->CAM_Ena); |
| tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl); |
| } |
| } |
| |
| static void tc35815_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
| { |
| struct tc35815_local *lp = dev->priv; |
| strcpy(info->driver, MODNAME); |
| strcpy(info->version, DRV_VERSION); |
| strcpy(info->bus_info, pci_name(lp->pci_dev)); |
| } |
| |
| static int tc35815_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct tc35815_local *lp = dev->priv; |
| spin_lock_irq(&lp->lock); |
| mii_ethtool_gset(&lp->mii, cmd); |
| spin_unlock_irq(&lp->lock); |
| return 0; |
| } |
| |
| static int tc35815_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int rc; |
| #if 1 /* use our negotiation method... */ |
| /* Verify the settings we care about. */ |
| if (cmd->autoneg != AUTONEG_ENABLE && |
| cmd->autoneg != AUTONEG_DISABLE) |
| return -EINVAL; |
| if (cmd->autoneg == AUTONEG_DISABLE && |
| ((cmd->speed != SPEED_100 && |
| cmd->speed != SPEED_10) || |
| (cmd->duplex != DUPLEX_HALF && |
| cmd->duplex != DUPLEX_FULL))) |
| return -EINVAL; |
| |
| /* Ok, do it to it. */ |
| spin_lock_irq(&lp->lock); |
| del_timer(&lp->timer); |
| tc35815_start_auto_negotiation(dev, cmd); |
| spin_unlock_irq(&lp->lock); |
| rc = 0; |
| #else |
| spin_lock_irq(&lp->lock); |
| rc = mii_ethtool_sset(&lp->mii, cmd); |
| spin_unlock_irq(&lp->lock); |
| #endif |
| return rc; |
| } |
| |
| static int tc35815_nway_reset(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int rc; |
| spin_lock_irq(&lp->lock); |
| rc = mii_nway_restart(&lp->mii); |
| spin_unlock_irq(&lp->lock); |
| return rc; |
| } |
| |
| static u32 tc35815_get_link(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int rc; |
| spin_lock_irq(&lp->lock); |
| rc = mii_link_ok(&lp->mii); |
| spin_unlock_irq(&lp->lock); |
| return rc; |
| } |
| |
| static u32 tc35815_get_msglevel(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| return lp->msg_enable; |
| } |
| |
| static void tc35815_set_msglevel(struct net_device *dev, u32 datum) |
| { |
| struct tc35815_local *lp = dev->priv; |
| lp->msg_enable = datum; |
| } |
| |
| static int tc35815_get_stats_count(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| return sizeof(lp->lstats) / sizeof(int); |
| } |
| |
| static void tc35815_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data) |
| { |
| struct tc35815_local *lp = dev->priv; |
| data[0] = lp->lstats.max_tx_qlen; |
| data[1] = lp->lstats.tx_ints; |
| data[2] = lp->lstats.rx_ints; |
| data[3] = lp->lstats.tx_underrun; |
| } |
| |
| static struct { |
| const char str[ETH_GSTRING_LEN]; |
| } ethtool_stats_keys[] = { |
| { "max_tx_qlen" }, |
| { "tx_ints" }, |
| { "rx_ints" }, |
| { "tx_underrun" }, |
| }; |
| |
| static void tc35815_get_strings(struct net_device *dev, u32 stringset, u8 *data) |
| { |
| memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys)); |
| } |
| |
| static const struct ethtool_ops tc35815_ethtool_ops = { |
| .get_drvinfo = tc35815_get_drvinfo, |
| .get_settings = tc35815_get_settings, |
| .set_settings = tc35815_set_settings, |
| .nway_reset = tc35815_nway_reset, |
| .get_link = tc35815_get_link, |
| .get_msglevel = tc35815_get_msglevel, |
| .set_msglevel = tc35815_set_msglevel, |
| .get_strings = tc35815_get_strings, |
| .get_stats_count = tc35815_get_stats_count, |
| .get_ethtool_stats = tc35815_get_ethtool_stats, |
| }; |
| |
| static int tc35815_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int rc; |
| |
| if (!netif_running(dev)) |
| return -EINVAL; |
| |
| spin_lock_irq(&lp->lock); |
| rc = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL); |
| spin_unlock_irq(&lp->lock); |
| |
| return rc; |
| } |
| |
| static int tc_mdio_read(struct net_device *dev, int phy_id, int location) |
| { |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| u32 data; |
| tc_writel(MD_CA_Busy | (phy_id << 5) | location, &tr->MD_CA); |
| while (tc_readl(&tr->MD_CA) & MD_CA_Busy) |
| ; |
| data = tc_readl(&tr->MD_Data); |
| return data & 0xffff; |
| } |
| |
| static void tc_mdio_write(struct net_device *dev, int phy_id, int location, |
| int val) |
| { |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| tc_writel(val, &tr->MD_Data); |
| tc_writel(MD_CA_Busy | MD_CA_Wr | (phy_id << 5) | location, &tr->MD_CA); |
| while (tc_readl(&tr->MD_CA) & MD_CA_Busy) |
| ; |
| } |
| |
| /* Auto negotiation. The scheme is very simple. We have a timer routine |
| * that keeps watching the auto negotiation process as it progresses. |
| * The DP83840 is first told to start doing it's thing, we set up the time |
| * and place the timer state machine in it's initial state. |
| * |
| * Here the timer peeks at the DP83840 status registers at each click to see |
| * if the auto negotiation has completed, we assume here that the DP83840 PHY |
| * will time out at some point and just tell us what (didn't) happen. For |
| * complete coverage we only allow so many of the ticks at this level to run, |
| * when this has expired we print a warning message and try another strategy. |
| * This "other" strategy is to force the interface into various speed/duplex |
| * configurations and we stop when we see a link-up condition before the |
| * maximum number of "peek" ticks have occurred. |
| * |
| * Once a valid link status has been detected we configure the BigMAC and |
| * the rest of the Happy Meal to speak the most efficient protocol we could |
| * get a clean link for. The priority for link configurations, highest first |
| * is: |
| * 100 Base-T Full Duplex |
| * 100 Base-T Half Duplex |
| * 10 Base-T Full Duplex |
| * 10 Base-T Half Duplex |
| * |
| * We start a new timer now, after a successful auto negotiation status has |
| * been detected. This timer just waits for the link-up bit to get set in |
| * the BMCR of the DP83840. When this occurs we print a kernel log message |
| * describing the link type in use and the fact that it is up. |
| * |
| * If a fatal error of some sort is signalled and detected in the interrupt |
| * service routine, and the chip is reset, or the link is ifconfig'd down |
| * and then back up, this entire process repeats itself all over again. |
| */ |
| /* Note: Above comments are come from sunhme driver. */ |
| |
| static int tc35815_try_next_permutation(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int pid = lp->phy_addr; |
| unsigned short bmcr; |
| |
| bmcr = tc_mdio_read(dev, pid, MII_BMCR); |
| |
| /* Downgrade from full to half duplex. Only possible via ethtool. */ |
| if (bmcr & BMCR_FULLDPLX) { |
| bmcr &= ~BMCR_FULLDPLX; |
| printk(KERN_DEBUG "%s: try next permutation (BMCR %x)\n", dev->name, bmcr); |
| tc_mdio_write(dev, pid, MII_BMCR, bmcr); |
| return 0; |
| } |
| |
| /* Downgrade from 100 to 10. */ |
| if (bmcr & BMCR_SPEED100) { |
| bmcr &= ~BMCR_SPEED100; |
| printk(KERN_DEBUG "%s: try next permutation (BMCR %x)\n", dev->name, bmcr); |
| tc_mdio_write(dev, pid, MII_BMCR, bmcr); |
| return 0; |
| } |
| |
| /* We've tried everything. */ |
| return -1; |
| } |
| |
| static void |
| tc35815_display_link_mode(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int pid = lp->phy_addr; |
| unsigned short lpa, bmcr; |
| char *speed = "", *duplex = ""; |
| |
| lpa = tc_mdio_read(dev, pid, MII_LPA); |
| bmcr = tc_mdio_read(dev, pid, MII_BMCR); |
| if (options.speed ? (bmcr & BMCR_SPEED100) : (lpa & (LPA_100HALF | LPA_100FULL))) |
| speed = "100Mb/s"; |
| else |
| speed = "10Mb/s"; |
| if (options.duplex ? (bmcr & BMCR_FULLDPLX) : (lpa & (LPA_100FULL | LPA_10FULL))) |
| duplex = "Full Duplex"; |
| else |
| duplex = "Half Duplex"; |
| |
| if (netif_msg_link(lp)) |
| printk(KERN_INFO "%s: Link is up at %s, %s.\n", |
| dev->name, speed, duplex); |
| printk(KERN_DEBUG "%s: MII BMCR %04x BMSR %04x LPA %04x\n", |
| dev->name, |
| bmcr, tc_mdio_read(dev, pid, MII_BMSR), lpa); |
| } |
| |
| static void tc35815_display_forced_link_mode(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int pid = lp->phy_addr; |
| unsigned short bmcr; |
| char *speed = "", *duplex = ""; |
| |
| bmcr = tc_mdio_read(dev, pid, MII_BMCR); |
| if (bmcr & BMCR_SPEED100) |
| speed = "100Mb/s"; |
| else |
| speed = "10Mb/s"; |
| if (bmcr & BMCR_FULLDPLX) |
| duplex = "Full Duplex.\n"; |
| else |
| duplex = "Half Duplex.\n"; |
| |
| if (netif_msg_link(lp)) |
| printk(KERN_INFO "%s: Link has been forced up at %s, %s", |
| dev->name, speed, duplex); |
| } |
| |
| static void tc35815_set_link_modes(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| int pid = lp->phy_addr; |
| unsigned short bmcr, lpa; |
| int speed; |
| |
| if (lp->timer_state == arbwait) { |
| lpa = tc_mdio_read(dev, pid, MII_LPA); |
| bmcr = tc_mdio_read(dev, pid, MII_BMCR); |
| printk(KERN_DEBUG "%s: MII BMCR %04x BMSR %04x LPA %04x\n", |
| dev->name, |
| bmcr, tc_mdio_read(dev, pid, MII_BMSR), lpa); |
| if (!(lpa & (LPA_10HALF | LPA_10FULL | |
| LPA_100HALF | LPA_100FULL))) { |
| /* fall back to 10HALF */ |
| printk(KERN_INFO "%s: bad ability %04x - falling back to 10HD.\n", |
| dev->name, lpa); |
| lpa = LPA_10HALF; |
| } |
| if (options.duplex ? (bmcr & BMCR_FULLDPLX) : (lpa & (LPA_100FULL | LPA_10FULL))) |
| lp->fullduplex = 1; |
| else |
| lp->fullduplex = 0; |
| if (options.speed ? (bmcr & BMCR_SPEED100) : (lpa & (LPA_100HALF | LPA_100FULL))) |
| speed = 100; |
| else |
| speed = 10; |
| } else { |
| /* Forcing a link mode. */ |
| bmcr = tc_mdio_read(dev, pid, MII_BMCR); |
| if (bmcr & BMCR_FULLDPLX) |
| lp->fullduplex = 1; |
| else |
| lp->fullduplex = 0; |
| if (bmcr & BMCR_SPEED100) |
| speed = 100; |
| else |
| speed = 10; |
| } |
| |
| tc_writel(tc_readl(&tr->MAC_Ctl) | MAC_HaltReq, &tr->MAC_Ctl); |
| if (lp->fullduplex) { |
| tc_writel(tc_readl(&tr->MAC_Ctl) | MAC_FullDup, &tr->MAC_Ctl); |
| } else { |
| tc_writel(tc_readl(&tr->MAC_Ctl) & ~MAC_FullDup, &tr->MAC_Ctl); |
| } |
| tc_writel(tc_readl(&tr->MAC_Ctl) & ~MAC_HaltReq, &tr->MAC_Ctl); |
| |
| /* TX4939 PCFG.SPEEDn bit will be changed on NETDEV_CHANGE event. */ |
| |
| #ifndef NO_CHECK_CARRIER |
| /* TX4939 does not have EnLCarr */ |
| if (lp->boardtype != TC35815_TX4939) { |
| #ifdef WORKAROUND_LOSTCAR |
| /* WORKAROUND: enable LostCrS only if half duplex operation */ |
| if (!lp->fullduplex && lp->boardtype != TC35815_TX4939) |
| tc_writel(tc_readl(&tr->Tx_Ctl) | Tx_EnLCarr, &tr->Tx_Ctl); |
| #endif |
| } |
| #endif |
| lp->mii.full_duplex = lp->fullduplex; |
| } |
| |
| static void tc35815_timer(unsigned long data) |
| { |
| struct net_device *dev = (struct net_device *)data; |
| struct tc35815_local *lp = dev->priv; |
| int pid = lp->phy_addr; |
| unsigned short bmsr, bmcr, lpa; |
| int restart_timer = 0; |
| |
| spin_lock_irq(&lp->lock); |
| |
| lp->timer_ticks++; |
| switch (lp->timer_state) { |
| case arbwait: |
| /* |
| * Only allow for 5 ticks, thats 10 seconds and much too |
| * long to wait for arbitration to complete. |
| */ |
| /* TC35815 need more times... */ |
| if (lp->timer_ticks >= 10) { |
| /* Enter force mode. */ |
| if (!options.doforce) { |
| printk(KERN_NOTICE "%s: Auto-Negotiation unsuccessful," |
| " cable probblem?\n", dev->name); |
| /* Try to restart the adaptor. */ |
| tc35815_restart(dev); |
| goto out; |
| } |
| printk(KERN_NOTICE "%s: Auto-Negotiation unsuccessful," |
| " trying force link mode\n", dev->name); |
| printk(KERN_DEBUG "%s: BMCR %x BMSR %x\n", dev->name, |
| tc_mdio_read(dev, pid, MII_BMCR), |
| tc_mdio_read(dev, pid, MII_BMSR)); |
| bmcr = BMCR_SPEED100; |
| tc_mdio_write(dev, pid, MII_BMCR, bmcr); |
| |
| /* |
| * OK, seems we need do disable the transceiver |
| * for the first tick to make sure we get an |
| * accurate link state at the second tick. |
| */ |
| |
| lp->timer_state = ltrywait; |
| lp->timer_ticks = 0; |
| restart_timer = 1; |
| } else { |
| /* Anything interesting happen? */ |
| bmsr = tc_mdio_read(dev, pid, MII_BMSR); |
| if (bmsr & BMSR_ANEGCOMPLETE) { |
| /* Just what we've been waiting for... */ |
| tc35815_set_link_modes(dev); |
| |
| /* |
| * Success, at least so far, advance our state |
| * engine. |
| */ |
| lp->timer_state = lupwait; |
| restart_timer = 1; |
| } else { |
| restart_timer = 1; |
| } |
| } |
| break; |
| |
| case lupwait: |
| /* |
| * Auto negotiation was successful and we are awaiting a |
| * link up status. I have decided to let this timer run |
| * forever until some sort of error is signalled, reporting |
| * a message to the user at 10 second intervals. |
| */ |
| bmsr = tc_mdio_read(dev, pid, MII_BMSR); |
| if (bmsr & BMSR_LSTATUS) { |
| /* |
| * Wheee, it's up, display the link mode in use and put |
| * the timer to sleep. |
| */ |
| tc35815_display_link_mode(dev); |
| netif_carrier_on(dev); |
| #ifdef WORKAROUND_100HALF_PROMISC |
| /* delayed promiscuous enabling */ |
| if (dev->flags & IFF_PROMISC) |
| tc35815_set_multicast_list(dev); |
| #endif |
| #if 1 |
| lp->saved_lpa = tc_mdio_read(dev, pid, MII_LPA); |
| lp->timer_state = lcheck; |
| restart_timer = 1; |
| #else |
| lp->timer_state = asleep; |
| restart_timer = 0; |
| #endif |
| } else { |
| if (lp->timer_ticks >= 10) { |
| printk(KERN_NOTICE "%s: Auto negotiation successful, link still " |
| "not completely up.\n", dev->name); |
| lp->timer_ticks = 0; |
| restart_timer = 1; |
| } else { |
| restart_timer = 1; |
| } |
| } |
| break; |
| |
| case ltrywait: |
| /* |
| * Making the timeout here too long can make it take |
| * annoyingly long to attempt all of the link mode |
| * permutations, but then again this is essentially |
| * error recovery code for the most part. |
| */ |
| bmsr = tc_mdio_read(dev, pid, MII_BMSR); |
| bmcr = tc_mdio_read(dev, pid, MII_BMCR); |
| if (lp->timer_ticks == 1) { |
| /* |
| * Re-enable transceiver, we'll re-enable the |
| * transceiver next tick, then check link state |
| * on the following tick. |
| */ |
| restart_timer = 1; |
| break; |
| } |
| if (lp->timer_ticks == 2) { |
| restart_timer = 1; |
| break; |
| } |
| if (bmsr & BMSR_LSTATUS) { |
| /* Force mode selection success. */ |
| tc35815_display_forced_link_mode(dev); |
| netif_carrier_on(dev); |
| tc35815_set_link_modes(dev); |
| #ifdef WORKAROUND_100HALF_PROMISC |
| /* delayed promiscuous enabling */ |
| if (dev->flags & IFF_PROMISC) |
| tc35815_set_multicast_list(dev); |
| #endif |
| #if 1 |
| lp->saved_lpa = tc_mdio_read(dev, pid, MII_LPA); |
| lp->timer_state = lcheck; |
| restart_timer = 1; |
| #else |
| lp->timer_state = asleep; |
| restart_timer = 0; |
| #endif |
| } else { |
| if (lp->timer_ticks >= 4) { /* 6 seconds or so... */ |
| int ret; |
| |
| ret = tc35815_try_next_permutation(dev); |
| if (ret == -1) { |
| /* |
| * Aieee, tried them all, reset the |
| * chip and try all over again. |
| */ |
| printk(KERN_NOTICE "%s: Link down, " |
| "cable problem?\n", |
| dev->name); |
| |
| /* Try to restart the adaptor. */ |
| tc35815_restart(dev); |
| goto out; |
| } |
| lp->timer_ticks = 0; |
| restart_timer = 1; |
| } else { |
| restart_timer = 1; |
| } |
| } |
| break; |
| |
| case lcheck: |
| bmcr = tc_mdio_read(dev, pid, MII_BMCR); |
| lpa = tc_mdio_read(dev, pid, MII_LPA); |
| if (bmcr & (BMCR_PDOWN | BMCR_ISOLATE | BMCR_RESET)) { |
| printk(KERN_ERR "%s: PHY down? (BMCR %x)\n", dev->name, |
| bmcr); |
| } else if ((lp->saved_lpa ^ lpa) & |
| (LPA_100FULL|LPA_100HALF|LPA_10FULL|LPA_10HALF)) { |
| printk(KERN_NOTICE "%s: link status changed" |
| " (BMCR %x LPA %x->%x)\n", dev->name, |
| bmcr, lp->saved_lpa, lpa); |
| } else { |
| /* go on */ |
| restart_timer = 1; |
| break; |
| } |
| /* Try to restart the adaptor. */ |
| tc35815_restart(dev); |
| goto out; |
| |
| case asleep: |
| default: |
| /* Can't happens.... */ |
| printk(KERN_ERR "%s: Aieee, link timer is asleep but we got " |
| "one anyways!\n", dev->name); |
| restart_timer = 0; |
| lp->timer_ticks = 0; |
| lp->timer_state = asleep; /* foo on you */ |
| break; |
| } |
| |
| if (restart_timer) { |
| lp->timer.expires = jiffies + msecs_to_jiffies(1200); |
| add_timer(&lp->timer); |
| } |
| out: |
| spin_unlock_irq(&lp->lock); |
| } |
| |
| static void tc35815_start_auto_negotiation(struct net_device *dev, |
| struct ethtool_cmd *ep) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int pid = lp->phy_addr; |
| unsigned short bmsr, bmcr, advertize; |
| int timeout; |
| |
| netif_carrier_off(dev); |
| bmsr = tc_mdio_read(dev, pid, MII_BMSR); |
| bmcr = tc_mdio_read(dev, pid, MII_BMCR); |
| advertize = tc_mdio_read(dev, pid, MII_ADVERTISE); |
| |
| if (ep == NULL || ep->autoneg == AUTONEG_ENABLE) { |
| if (options.speed || options.duplex) { |
| /* Advertise only specified configuration. */ |
| advertize &= ~(ADVERTISE_10HALF | |
| ADVERTISE_10FULL | |
| ADVERTISE_100HALF | |
| ADVERTISE_100FULL); |
| if (options.speed != 10) { |
| if (options.duplex != 1) |
| advertize |= ADVERTISE_100FULL; |
| if (options.duplex != 2) |
| advertize |= ADVERTISE_100HALF; |
| } |
| if (options.speed != 100) { |
| if (options.duplex != 1) |
| advertize |= ADVERTISE_10FULL; |
| if (options.duplex != 2) |
| advertize |= ADVERTISE_10HALF; |
| } |
| if (options.speed == 100) |
| bmcr |= BMCR_SPEED100; |
| else if (options.speed == 10) |
| bmcr &= ~BMCR_SPEED100; |
| if (options.duplex == 2) |
| bmcr |= BMCR_FULLDPLX; |
| else if (options.duplex == 1) |
| bmcr &= ~BMCR_FULLDPLX; |
| } else { |
| /* Advertise everything we can support. */ |
| if (bmsr & BMSR_10HALF) |
| advertize |= ADVERTISE_10HALF; |
| else |
| advertize &= ~ADVERTISE_10HALF; |
| if (bmsr & BMSR_10FULL) |
| advertize |= ADVERTISE_10FULL; |
| else |
| advertize &= ~ADVERTISE_10FULL; |
| if (bmsr & BMSR_100HALF) |
| advertize |= ADVERTISE_100HALF; |
| else |
| advertize &= ~ADVERTISE_100HALF; |
| if (bmsr & BMSR_100FULL) |
| advertize |= ADVERTISE_100FULL; |
| else |
| advertize &= ~ADVERTISE_100FULL; |
| } |
| |
| tc_mdio_write(dev, pid, MII_ADVERTISE, advertize); |
| |
| /* Enable Auto-Negotiation, this is usually on already... */ |
| bmcr |= BMCR_ANENABLE; |
| tc_mdio_write(dev, pid, MII_BMCR, bmcr); |
| |
| /* Restart it to make sure it is going. */ |
| bmcr |= BMCR_ANRESTART; |
| tc_mdio_write(dev, pid, MII_BMCR, bmcr); |
| printk(KERN_DEBUG "%s: ADVERTISE %x BMCR %x\n", dev->name, advertize, bmcr); |
| |
| /* BMCR_ANRESTART self clears when the process has begun. */ |
| timeout = 64; /* More than enough. */ |
| while (--timeout) { |
| bmcr = tc_mdio_read(dev, pid, MII_BMCR); |
| if (!(bmcr & BMCR_ANRESTART)) |
| break; /* got it. */ |
| udelay(10); |
| } |
| if (!timeout) { |
| printk(KERN_ERR "%s: TC35815 would not start auto " |
| "negotiation BMCR=0x%04x\n", |
| dev->name, bmcr); |
| printk(KERN_NOTICE "%s: Performing force link " |
| "detection.\n", dev->name); |
| goto force_link; |
| } else { |
| printk(KERN_DEBUG "%s: auto negotiation started.\n", dev->name); |
| lp->timer_state = arbwait; |
| } |
| } else { |
| force_link: |
| /* Force the link up, trying first a particular mode. |
| * Either we are here at the request of ethtool or |
| * because the Happy Meal would not start to autoneg. |
| */ |
| |
| /* Disable auto-negotiation in BMCR, enable the duplex and |
| * speed setting, init the timer state machine, and fire it off. |
| */ |
| if (ep == NULL || ep->autoneg == AUTONEG_ENABLE) { |
| bmcr = BMCR_SPEED100; |
| } else { |
| if (ep->speed == SPEED_100) |
| bmcr = BMCR_SPEED100; |
| else |
| bmcr = 0; |
| if (ep->duplex == DUPLEX_FULL) |
| bmcr |= BMCR_FULLDPLX; |
| } |
| tc_mdio_write(dev, pid, MII_BMCR, bmcr); |
| |
| /* OK, seems we need do disable the transceiver for the first |
| * tick to make sure we get an accurate link state at the |
| * second tick. |
| */ |
| lp->timer_state = ltrywait; |
| } |
| |
| del_timer(&lp->timer); |
| lp->timer_ticks = 0; |
| lp->timer.expires = jiffies + msecs_to_jiffies(1200); |
| add_timer(&lp->timer); |
| } |
| |
| static void tc35815_find_phy(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int pid = lp->phy_addr; |
| unsigned short id0; |
| |
| /* find MII phy */ |
| for (pid = 31; pid >= 0; pid--) { |
| id0 = tc_mdio_read(dev, pid, MII_BMSR); |
| if (id0 != 0xffff && id0 != 0x0000 && |
| (id0 & BMSR_RESV) != (0xffff & BMSR_RESV) /* paranoia? */ |
| ) { |
| lp->phy_addr = pid; |
| break; |
| } |
| } |
| if (pid < 0) { |
| printk(KERN_ERR "%s: No MII Phy found.\n", |
| dev->name); |
| lp->phy_addr = pid = 0; |
| } |
| |
| lp->mii_id[0] = tc_mdio_read(dev, pid, MII_PHYSID1); |
| lp->mii_id[1] = tc_mdio_read(dev, pid, MII_PHYSID2); |
| if (netif_msg_hw(lp)) |
| printk(KERN_INFO "%s: PHY(%02x) ID %04x %04x\n", dev->name, |
| pid, lp->mii_id[0], lp->mii_id[1]); |
| } |
| |
| static void tc35815_phy_chip_init(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| int pid = lp->phy_addr; |
| unsigned short bmcr; |
| struct ethtool_cmd ecmd, *ep; |
| |
| /* dis-isolate if needed. */ |
| bmcr = tc_mdio_read(dev, pid, MII_BMCR); |
| if (bmcr & BMCR_ISOLATE) { |
| int count = 32; |
| printk(KERN_DEBUG "%s: unisolating...", dev->name); |
| tc_mdio_write(dev, pid, MII_BMCR, bmcr & ~BMCR_ISOLATE); |
| while (--count) { |
| if (!(tc_mdio_read(dev, pid, MII_BMCR) & BMCR_ISOLATE)) |
| break; |
| udelay(20); |
| } |
| printk(" %s.\n", count ? "done" : "failed"); |
| } |
| |
| if (options.speed && options.duplex) { |
| ecmd.autoneg = AUTONEG_DISABLE; |
| ecmd.speed = options.speed == 10 ? SPEED_10 : SPEED_100; |
| ecmd.duplex = options.duplex == 1 ? DUPLEX_HALF : DUPLEX_FULL; |
| ep = &ecmd; |
| } else { |
| ep = NULL; |
| } |
| tc35815_start_auto_negotiation(dev, ep); |
| } |
| |
| static void tc35815_chip_reset(struct net_device *dev) |
| { |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| int i; |
| /* reset the controller */ |
| tc_writel(MAC_Reset, &tr->MAC_Ctl); |
| udelay(4); /* 3200ns */ |
| i = 0; |
| while (tc_readl(&tr->MAC_Ctl) & MAC_Reset) { |
| if (i++ > 100) { |
| printk(KERN_ERR "%s: MAC reset failed.\n", dev->name); |
| break; |
| } |
| mdelay(1); |
| } |
| tc_writel(0, &tr->MAC_Ctl); |
| |
| /* initialize registers to default value */ |
| tc_writel(0, &tr->DMA_Ctl); |
| tc_writel(0, &tr->TxThrsh); |
| tc_writel(0, &tr->TxPollCtr); |
| tc_writel(0, &tr->RxFragSize); |
| tc_writel(0, &tr->Int_En); |
| tc_writel(0, &tr->FDA_Bas); |
| tc_writel(0, &tr->FDA_Lim); |
| tc_writel(0xffffffff, &tr->Int_Src); /* Write 1 to clear */ |
| tc_writel(0, &tr->CAM_Ctl); |
| tc_writel(0, &tr->Tx_Ctl); |
| tc_writel(0, &tr->Rx_Ctl); |
| tc_writel(0, &tr->CAM_Ena); |
| (void)tc_readl(&tr->Miss_Cnt); /* Read to clear */ |
| |
| /* initialize internal SRAM */ |
| tc_writel(DMA_TestMode, &tr->DMA_Ctl); |
| for (i = 0; i < 0x1000; i += 4) { |
| tc_writel(i, &tr->CAM_Adr); |
| tc_writel(0, &tr->CAM_Data); |
| } |
| tc_writel(0, &tr->DMA_Ctl); |
| } |
| |
| static void tc35815_chip_init(struct net_device *dev) |
| { |
| struct tc35815_local *lp = dev->priv; |
| struct tc35815_regs __iomem *tr = |
| (struct tc35815_regs __iomem *)dev->base_addr; |
| unsigned long txctl = TX_CTL_CMD; |
| |
| tc35815_phy_chip_init(dev); |
| |
| /* load station address to CAM */ |
| tc35815_set_cam_entry(dev, CAM_ENTRY_SOURCE, dev->dev_addr); |
| |
| /* Enable CAM (broadcast and unicast) */ |
| tc_writel(CAM_Ena_Bit(CAM_ENTRY_SOURCE), &tr->CAM_Ena); |
| tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl); |
| |
| /* Use DMA_RxAlign_2 to make IP header 4-byte aligned. */ |
| if (HAVE_DMA_RXALIGN(lp)) |
| tc_writel(DMA_BURST_SIZE | DMA_RxAlign_2, &tr->DMA_Ctl); |
| else |
| tc_writel(DMA_BURST_SIZE, &tr->DMA_Ctl); |
| #ifdef TC35815_USE_PACKEDBUFFER |
| tc_writel(RxFrag_EnPack | ETH_ZLEN, &tr->RxFragSize); /* Packing */ |
| #else |
| tc_writel(ETH_ZLEN, &tr->RxFragSize); |
| #endif |
| tc_writel(0, &tr->TxPollCtr); /* Batch mode */ |
| tc_writel(TX_THRESHOLD, &tr->TxThrsh); |
| tc_writel(INT_EN_CMD, &tr->Int_En); |
| |
| /* set queues */ |
| tc_writel(fd_virt_to_bus(lp, lp->rfd_base), &tr->FDA_Bas); |
| tc_writel((unsigned long)lp->rfd_limit - (unsigned long)lp->rfd_base, |
| &tr->FDA_Lim); |
| /* |
| * Activation method: |
| * First, enable the MAC Transmitter and the DMA Receive circuits. |
| * Then enable the DMA Transmitter and the MAC Receive circuits. |
| */ |
| tc_writel(fd_virt_to_bus(lp, lp->fbl_ptr), &tr->BLFrmPtr); /* start DMA receiver */ |
| tc_writel(RX_CTL_CMD, &tr->Rx_Ctl); /* start MAC receiver */ |
| |
| /* start MAC transmitter */ |
| #ifndef NO_CHECK_CARRIER |
| /* TX4939 does not have EnLCarr */ |
| if (lp->boardtype == TC35815_TX4939) |
| txctl &= ~Tx_EnLCarr; |
| #ifdef WORKAROUND_LOSTCAR |
| /* WORKAROUND: ignore LostCrS in full duplex operation */ |
| if ((lp->timer_state != asleep && lp->timer_state != lcheck) || |
| lp->fullduplex) |
| txctl &= ~Tx_EnLCarr; |
| #endif |
| #endif /* !NO_CHECK_CARRIER */ |
| #ifdef GATHER_TXINT |
| txctl &= ~Tx_EnComp; /* disable global tx completion int. */ |
| #endif |
| tc_writel(txctl, &tr->Tx_Ctl); |
| } |
| |
| #ifdef CONFIG_PM |
| static int tc35815_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| struct tc35815_local *lp = dev->priv; |
| unsigned long flags; |
| |
| pci_save_state(pdev); |
| if (!netif_running(dev)) |
| return 0; |
| netif_device_detach(dev); |
| spin_lock_irqsave(&lp->lock, flags); |
| del_timer(&lp->timer); /* Kill if running */ |
| tc35815_chip_reset(dev); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| pci_set_power_state(pdev, PCI_D3hot); |
| return 0; |
| } |
| |
| static int tc35815_resume(struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| struct tc35815_local *lp = dev->priv; |
| unsigned long flags; |
| |
| pci_restore_state(pdev); |
| if (!netif_running(dev)) |
| return 0; |
| pci_set_power_state(pdev, PCI_D0); |
| spin_lock_irqsave(&lp->lock, flags); |
| tc35815_restart(dev); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| netif_device_attach(dev); |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static struct pci_driver tc35815_pci_driver = { |
| .name = MODNAME, |
| .id_table = tc35815_pci_tbl, |
| .probe = tc35815_init_one, |
| .remove = __devexit_p(tc35815_remove_one), |
| #ifdef CONFIG_PM |
| .suspend = tc35815_suspend, |
| .resume = tc35815_resume, |
| #endif |
| }; |
| |
| module_param_named(speed, options.speed, int, 0); |
| MODULE_PARM_DESC(speed, "0:auto, 10:10Mbps, 100:100Mbps"); |
| module_param_named(duplex, options.duplex, int, 0); |
| MODULE_PARM_DESC(duplex, "0:auto, 1:half, 2:full"); |
| module_param_named(doforce, options.doforce, int, 0); |
| MODULE_PARM_DESC(doforce, "try force link mode if auto-negotiation failed"); |
| |
| static int __init tc35815_init_module(void) |
| { |
| return pci_register_driver(&tc35815_pci_driver); |
| } |
| |
| static void __exit tc35815_cleanup_module(void) |
| { |
| pci_unregister_driver(&tc35815_pci_driver); |
| } |
| |
| module_init(tc35815_init_module); |
| module_exit(tc35815_cleanup_module); |
| |
| MODULE_DESCRIPTION("TOSHIBA TC35815 PCI 10M/100M Ethernet driver"); |
| MODULE_LICENSE("GPL"); |