| /* |
| * net/tipc/core.h: Include file for TIPC global declarations |
| * |
| * Copyright (c) 2005-2006, 2013 Ericsson AB |
| * Copyright (c) 2005-2007, 2010-2013, Wind River Systems |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _TIPC_CORE_H |
| #define _TIPC_CORE_H |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/tipc.h> |
| #include <linux/tipc_config.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/mm.h> |
| #include <linux/timer.h> |
| #include <linux/string.h> |
| #include <linux/uaccess.h> |
| #include <linux/interrupt.h> |
| #include <linux/atomic.h> |
| #include <asm/hardirq.h> |
| #include <linux/netdevice.h> |
| #include <linux/in.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <linux/vmalloc.h> |
| |
| |
| #define TIPC_MOD_VER "2.0.0" |
| |
| #define ULTRA_STRING_MAX_LEN 32768 |
| #define TIPC_MAX_SUBSCRIPTIONS 65535 |
| #define TIPC_MAX_PUBLICATIONS 65535 |
| |
| struct tipc_msg; /* msg.h */ |
| |
| int tipc_snprintf(char *buf, int len, const char *fmt, ...); |
| |
| /* |
| * TIPC-specific error codes |
| */ |
| #define ELINKCONG EAGAIN /* link congestion <=> resource unavailable */ |
| |
| /* |
| * Global configuration variables |
| */ |
| extern u32 tipc_own_addr __read_mostly; |
| extern int tipc_max_ports __read_mostly; |
| extern int tipc_net_id __read_mostly; |
| extern int tipc_remote_management __read_mostly; |
| extern int sysctl_tipc_rmem[3] __read_mostly; |
| |
| /* |
| * Other global variables |
| */ |
| extern int tipc_random __read_mostly; |
| |
| /* |
| * Routines available to privileged subsystems |
| */ |
| int tipc_core_start_net(unsigned long); |
| int tipc_handler_start(void); |
| void tipc_handler_stop(void); |
| int tipc_netlink_start(void); |
| void tipc_netlink_stop(void); |
| int tipc_socket_init(void); |
| void tipc_socket_stop(void); |
| int tipc_sock_create_local(int type, struct socket **res); |
| void tipc_sock_release_local(struct socket *sock); |
| int tipc_sock_accept_local(struct socket *sock, struct socket **newsock, |
| int flags); |
| |
| #ifdef CONFIG_SYSCTL |
| int tipc_register_sysctl(void); |
| void tipc_unregister_sysctl(void); |
| #else |
| #define tipc_register_sysctl() 0 |
| #define tipc_unregister_sysctl() |
| #endif |
| |
| /* |
| * TIPC timer and signal code |
| */ |
| typedef void (*Handler) (unsigned long); |
| |
| u32 tipc_k_signal(Handler routine, unsigned long argument); |
| |
| /** |
| * k_init_timer - initialize a timer |
| * @timer: pointer to timer structure |
| * @routine: pointer to routine to invoke when timer expires |
| * @argument: value to pass to routine when timer expires |
| * |
| * Timer must be initialized before use (and terminated when no longer needed). |
| */ |
| static inline void k_init_timer(struct timer_list *timer, Handler routine, |
| unsigned long argument) |
| { |
| setup_timer(timer, routine, argument); |
| } |
| |
| /** |
| * k_start_timer - start a timer |
| * @timer: pointer to timer structure |
| * @msec: time to delay (in ms) |
| * |
| * Schedules a previously initialized timer for later execution. |
| * If timer is already running, the new timeout overrides the previous request. |
| * |
| * To ensure the timer doesn't expire before the specified delay elapses, |
| * the amount of delay is rounded up when converting to the jiffies |
| * then an additional jiffy is added to account for the fact that |
| * the starting time may be in the middle of the current jiffy. |
| */ |
| static inline void k_start_timer(struct timer_list *timer, unsigned long msec) |
| { |
| mod_timer(timer, jiffies + msecs_to_jiffies(msec) + 1); |
| } |
| |
| /** |
| * k_cancel_timer - cancel a timer |
| * @timer: pointer to timer structure |
| * |
| * Cancels a previously initialized timer. |
| * Can be called safely even if the timer is already inactive. |
| * |
| * WARNING: Must not be called when holding locks required by the timer's |
| * timeout routine, otherwise deadlock can occur on SMP systems! |
| */ |
| static inline void k_cancel_timer(struct timer_list *timer) |
| { |
| del_timer_sync(timer); |
| } |
| |
| /** |
| * k_term_timer - terminate a timer |
| * @timer: pointer to timer structure |
| * |
| * Prevents further use of a previously initialized timer. |
| * |
| * WARNING: Caller must ensure timer isn't currently running. |
| * |
| * (Do not "enhance" this routine to automatically cancel an active timer, |
| * otherwise deadlock can arise when a timeout routine calls k_term_timer.) |
| */ |
| static inline void k_term_timer(struct timer_list *timer) |
| { |
| } |
| |
| /* |
| * TIPC message buffer code |
| * |
| * TIPC message buffer headroom reserves space for the worst-case |
| * link-level device header (in case the message is sent off-node). |
| * |
| * Note: Headroom should be a multiple of 4 to ensure the TIPC header fields |
| * are word aligned for quicker access |
| */ |
| #define BUF_HEADROOM LL_MAX_HEADER |
| |
| struct tipc_skb_cb { |
| void *handle; |
| }; |
| |
| #define TIPC_SKB_CB(__skb) ((struct tipc_skb_cb *)&((__skb)->cb[0])) |
| |
| static inline struct tipc_msg *buf_msg(struct sk_buff *skb) |
| { |
| return (struct tipc_msg *)skb->data; |
| } |
| |
| struct sk_buff *tipc_buf_acquire(u32 size); |
| |
| #endif |