| /* $(CROSS_COMPILE)cc -Wall -Wextra -g -lpthread -o testusb testusb.c */ |
| |
| /* |
| * Copyright (c) 2002 by David Brownell |
| * Copyright (c) 2010 by Samsung Electronics |
| * Author: Michal Nazarewicz <mina86@mina86.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* |
| * This program issues ioctls to perform the tests implemented by the |
| * kernel driver. It can generate a variety of transfer patterns; you |
| * should make sure to test both regular streaming and mixes of |
| * transfer sizes (including short transfers). |
| * |
| * For more information on how this can be used and on USB testing |
| * refer to <URL:http://www.linux-usb.org/usbtest/>. |
| */ |
| |
| #include <stdio.h> |
| #include <string.h> |
| #include <ftw.h> |
| #include <stdlib.h> |
| #include <pthread.h> |
| #include <unistd.h> |
| #include <errno.h> |
| #include <limits.h> |
| |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <fcntl.h> |
| |
| #include <sys/ioctl.h> |
| #include <linux/usbdevice_fs.h> |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #define TEST_CASES 30 |
| |
| // FIXME make these public somewhere; usbdevfs.h? |
| |
| struct usbtest_param { |
| // inputs |
| unsigned test_num; /* 0..(TEST_CASES-1) */ |
| unsigned iterations; |
| unsigned length; |
| unsigned vary; |
| unsigned sglen; |
| |
| // outputs |
| struct timeval duration; |
| }; |
| #define USBTEST_REQUEST _IOWR('U', 100, struct usbtest_param) |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* #include <linux/usb_ch9.h> */ |
| |
| #define USB_DT_DEVICE 0x01 |
| #define USB_DT_INTERFACE 0x04 |
| |
| #define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ |
| #define USB_CLASS_VENDOR_SPEC 0xff |
| |
| |
| struct usb_device_descriptor { |
| __u8 bLength; |
| __u8 bDescriptorType; |
| __u16 bcdUSB; |
| __u8 bDeviceClass; |
| __u8 bDeviceSubClass; |
| __u8 bDeviceProtocol; |
| __u8 bMaxPacketSize0; |
| __u16 idVendor; |
| __u16 idProduct; |
| __u16 bcdDevice; |
| __u8 iManufacturer; |
| __u8 iProduct; |
| __u8 iSerialNumber; |
| __u8 bNumConfigurations; |
| } __attribute__ ((packed)); |
| |
| struct usb_interface_descriptor { |
| __u8 bLength; |
| __u8 bDescriptorType; |
| |
| __u8 bInterfaceNumber; |
| __u8 bAlternateSetting; |
| __u8 bNumEndpoints; |
| __u8 bInterfaceClass; |
| __u8 bInterfaceSubClass; |
| __u8 bInterfaceProtocol; |
| __u8 iInterface; |
| } __attribute__ ((packed)); |
| |
| enum usb_device_speed { |
| USB_SPEED_UNKNOWN = 0, /* enumerating */ |
| USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ |
| USB_SPEED_HIGH /* usb 2.0 */ |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static char *speed (enum usb_device_speed s) |
| { |
| switch (s) { |
| case USB_SPEED_UNKNOWN: return "unknown"; |
| case USB_SPEED_LOW: return "low"; |
| case USB_SPEED_FULL: return "full"; |
| case USB_SPEED_HIGH: return "high"; |
| default: return "??"; |
| } |
| } |
| |
| struct testdev { |
| struct testdev *next; |
| char *name; |
| pthread_t thread; |
| enum usb_device_speed speed; |
| unsigned ifnum : 8; |
| unsigned forever : 1; |
| int test; |
| |
| struct usbtest_param param; |
| }; |
| static struct testdev *testdevs; |
| |
| static int testdev_ffs_ifnum(FILE *fd) |
| { |
| union { |
| char buf[255]; |
| struct usb_interface_descriptor intf; |
| } u; |
| |
| for (;;) { |
| if (fread(u.buf, 1, 1, fd) != 1) |
| return -1; |
| if (fread(u.buf + 1, (unsigned char)u.buf[0] - 1, 1, fd) != 1) |
| return -1; |
| |
| if (u.intf.bLength == sizeof u.intf |
| && u.intf.bDescriptorType == USB_DT_INTERFACE |
| && u.intf.bNumEndpoints == 2 |
| && u.intf.bInterfaceClass == USB_CLASS_VENDOR_SPEC |
| && u.intf.bInterfaceSubClass == 0 |
| && u.intf.bInterfaceProtocol == 0) |
| return (unsigned char)u.intf.bInterfaceNumber; |
| } |
| } |
| |
| static int testdev_ifnum(FILE *fd) |
| { |
| struct usb_device_descriptor dev; |
| |
| if (fread(&dev, sizeof dev, 1, fd) != 1) |
| return -1; |
| |
| if (dev.bLength != sizeof dev || dev.bDescriptorType != USB_DT_DEVICE) |
| return -1; |
| |
| /* FX2 with (tweaked) bulksrc firmware */ |
| if (dev.idVendor == 0x0547 && dev.idProduct == 0x1002) |
| return 0; |
| |
| /*----------------------------------------------------*/ |
| |
| /* devices that start up using the EZ-USB default device and |
| * which we can use after loading simple firmware. hotplug |
| * can fxload it, and then run this test driver. |
| * |
| * we return false positives in two cases: |
| * - the device has a "real" driver (maybe usb-serial) that |
| * renumerates. the device should vanish quickly. |
| * - the device doesn't have the test firmware installed. |
| */ |
| |
| /* generic EZ-USB FX controller */ |
| if (dev.idVendor == 0x0547 && dev.idProduct == 0x2235) |
| return 0; |
| |
| /* generic EZ-USB FX2 controller */ |
| if (dev.idVendor == 0x04b4 && dev.idProduct == 0x8613) |
| return 0; |
| |
| /* CY3671 development board with EZ-USB FX */ |
| if (dev.idVendor == 0x0547 && dev.idProduct == 0x0080) |
| return 0; |
| |
| /* Keyspan 19Qi uses an21xx (original EZ-USB) */ |
| if (dev.idVendor == 0x06cd && dev.idProduct == 0x010b) |
| return 0; |
| |
| /*----------------------------------------------------*/ |
| |
| /* "gadget zero", Linux-USB test software */ |
| if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4a0) |
| return 0; |
| |
| /* user mode subset of that */ |
| if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4a4) |
| return testdev_ffs_ifnum(fd); |
| /* return 0; */ |
| |
| /* iso version of usermode code */ |
| if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4a3) |
| return 0; |
| |
| /* some GPL'd test firmware uses these IDs */ |
| |
| if (dev.idVendor == 0xfff0 && dev.idProduct == 0xfff0) |
| return 0; |
| |
| /*----------------------------------------------------*/ |
| |
| /* iBOT2 high speed webcam */ |
| if (dev.idVendor == 0x0b62 && dev.idProduct == 0x0059) |
| return 0; |
| |
| /*----------------------------------------------------*/ |
| |
| /* the FunctionFS gadget can have the source/sink interface |
| * anywhere. We look for an interface descriptor that match |
| * what we expect. We ignore configuratiens thou. */ |
| |
| if (dev.idVendor == 0x0525 && dev.idProduct == 0xa4ac |
| && (dev.bDeviceClass == USB_CLASS_PER_INTERFACE |
| || dev.bDeviceClass == USB_CLASS_VENDOR_SPEC)) |
| return testdev_ffs_ifnum(fd); |
| |
| return -1; |
| } |
| |
| static int find_testdev(const char *name, const struct stat *sb, int flag) |
| { |
| FILE *fd; |
| int ifnum; |
| struct testdev *entry; |
| |
| (void)sb; /* unused */ |
| |
| if (flag != FTW_F) |
| return 0; |
| |
| fd = fopen(name, "rb"); |
| if (!fd) { |
| perror(name); |
| return 0; |
| } |
| |
| ifnum = testdev_ifnum(fd); |
| fclose(fd); |
| if (ifnum < 0) |
| return 0; |
| |
| entry = calloc(1, sizeof *entry); |
| if (!entry) |
| goto nomem; |
| |
| entry->name = strdup(name); |
| if (!entry->name) { |
| free(entry); |
| nomem: |
| perror("malloc"); |
| return 0; |
| } |
| |
| entry->ifnum = ifnum; |
| |
| /* FIXME update USBDEVFS_CONNECTINFO so it tells about high speed etc */ |
| |
| fprintf(stderr, "%s speed\t%s\t%u\n", |
| speed(entry->speed), entry->name, entry->ifnum); |
| |
| entry->next = testdevs; |
| testdevs = entry; |
| return 0; |
| } |
| |
| static int |
| usbdev_ioctl (int fd, int ifno, unsigned request, void *param) |
| { |
| struct usbdevfs_ioctl wrapper; |
| |
| wrapper.ifno = ifno; |
| wrapper.ioctl_code = request; |
| wrapper.data = param; |
| |
| return ioctl (fd, USBDEVFS_IOCTL, &wrapper); |
| } |
| |
| static void *handle_testdev (void *arg) |
| { |
| struct testdev *dev = arg; |
| int fd, i; |
| int status; |
| |
| if ((fd = open (dev->name, O_RDWR)) < 0) { |
| perror ("can't open dev file r/w"); |
| return 0; |
| } |
| |
| restart: |
| for (i = 0; i < TEST_CASES; i++) { |
| if (dev->test != -1 && dev->test != i) |
| continue; |
| dev->param.test_num = i; |
| |
| status = usbdev_ioctl (fd, dev->ifnum, |
| USBTEST_REQUEST, &dev->param); |
| if (status < 0 && errno == EOPNOTSUPP) |
| continue; |
| |
| /* FIXME need a "syslog it" option for background testing */ |
| |
| /* NOTE: each thread emits complete lines; no fragments! */ |
| if (status < 0) { |
| char buf [80]; |
| int err = errno; |
| |
| if (strerror_r (errno, buf, sizeof buf)) { |
| snprintf (buf, sizeof buf, "error %d", err); |
| errno = err; |
| } |
| printf ("%s test %d --> %d (%s)\n", |
| dev->name, i, errno, buf); |
| } else |
| printf ("%s test %d, %4d.%.06d secs\n", dev->name, i, |
| (int) dev->param.duration.tv_sec, |
| (int) dev->param.duration.tv_usec); |
| |
| fflush (stdout); |
| } |
| if (dev->forever) |
| goto restart; |
| |
| close (fd); |
| return arg; |
| } |
| |
| static const char *usb_dir_find(void) |
| { |
| static char udev_usb_path[] = "/dev/bus/usb"; |
| |
| if (access(udev_usb_path, F_OK) == 0) |
| return udev_usb_path; |
| |
| return NULL; |
| } |
| |
| static int parse_num(unsigned *num, const char *str) |
| { |
| unsigned long val; |
| char *end; |
| |
| errno = 0; |
| val = strtoul(str, &end, 0); |
| if (errno || *end || val > UINT_MAX) |
| return -1; |
| *num = val; |
| return 0; |
| } |
| |
| int main (int argc, char **argv) |
| { |
| |
| int c; |
| struct testdev *entry; |
| char *device; |
| const char *usb_dir = NULL; |
| int all = 0, forever = 0, not = 0; |
| int test = -1 /* all */; |
| struct usbtest_param param; |
| |
| /* pick defaults that works with all speeds, without short packets. |
| * |
| * Best per-frame data rates: |
| * high speed, bulk 512 * 13 * 8 = 53248 |
| * interrupt 1024 * 3 * 8 = 24576 |
| * full speed, bulk/intr 64 * 19 = 1216 |
| * interrupt 64 * 1 = 64 |
| * low speed, interrupt 8 * 1 = 8 |
| */ |
| param.iterations = 1000; |
| param.length = 512; |
| param.vary = 512; |
| param.sglen = 32; |
| |
| /* for easy use when hotplugging */ |
| device = getenv ("DEVICE"); |
| |
| while ((c = getopt (argc, argv, "D:aA:c:g:hlns:t:v:")) != EOF) |
| switch (c) { |
| case 'D': /* device, if only one */ |
| device = optarg; |
| continue; |
| case 'A': /* use all devices with specified USB dir */ |
| usb_dir = optarg; |
| /* FALL THROUGH */ |
| case 'a': /* use all devices */ |
| device = NULL; |
| all = 1; |
| continue; |
| case 'c': /* count iterations */ |
| if (parse_num(¶m.iterations, optarg)) |
| goto usage; |
| continue; |
| case 'g': /* scatter/gather entries */ |
| if (parse_num(¶m.sglen, optarg)) |
| goto usage; |
| continue; |
| case 'l': /* loop forever */ |
| forever = 1; |
| continue; |
| case 'n': /* no test running! */ |
| not = 1; |
| continue; |
| case 's': /* size of packet */ |
| if (parse_num(¶m.length, optarg)) |
| goto usage; |
| continue; |
| case 't': /* run just one test */ |
| test = atoi (optarg); |
| if (test < 0) |
| goto usage; |
| continue; |
| case 'v': /* vary packet size by ... */ |
| if (parse_num(¶m.vary, optarg)) |
| goto usage; |
| continue; |
| case '?': |
| case 'h': |
| default: |
| usage: |
| fprintf (stderr, |
| "usage: %s [options]\n" |
| "Options:\n" |
| "\t-D dev only test specific device\n" |
| "\t-A usb-dir\n" |
| "\t-a test all recognized devices\n" |
| "\t-l loop forever(for stress test)\n" |
| "\t-t testnum only run specified case\n" |
| "\t-n no test running, show devices to be tested\n" |
| "Case arguments:\n" |
| "\t-c iterations default 1000\n" |
| "\t-s packetsize default 512\n" |
| "\t-g sglen default 32\n" |
| "\t-v vary default 512\n", |
| argv[0]); |
| return 1; |
| } |
| if (optind != argc) |
| goto usage; |
| if (!all && !device) { |
| fprintf (stderr, "must specify '-a' or '-D dev', " |
| "or DEVICE=/dev/bus/usb/BBB/DDD in env\n"); |
| goto usage; |
| } |
| |
| /* Find usb device subdirectory */ |
| if (!usb_dir) { |
| usb_dir = usb_dir_find(); |
| if (!usb_dir) { |
| fputs ("USB device files are missing\n", stderr); |
| return -1; |
| } |
| } |
| |
| /* collect and list the test devices */ |
| if (ftw (usb_dir, find_testdev, 3) != 0) { |
| fputs ("ftw failed; are USB device files missing?\n", stderr); |
| return -1; |
| } |
| |
| /* quit, run single test, or create test threads */ |
| if (!testdevs && !device) { |
| fputs ("no test devices recognized\n", stderr); |
| return -1; |
| } |
| if (not) |
| return 0; |
| if (testdevs && testdevs->next == 0 && !device) |
| device = testdevs->name; |
| for (entry = testdevs; entry; entry = entry->next) { |
| int status; |
| |
| entry->param = param; |
| entry->forever = forever; |
| entry->test = test; |
| |
| if (device) { |
| if (strcmp (entry->name, device)) |
| continue; |
| return handle_testdev (entry) != entry; |
| } |
| status = pthread_create (&entry->thread, 0, handle_testdev, entry); |
| if (status) |
| perror ("pthread_create"); |
| } |
| if (device) { |
| struct testdev dev; |
| |
| /* kernel can recognize test devices we don't */ |
| fprintf (stderr, "%s: %s may see only control tests\n", |
| argv [0], device); |
| |
| memset (&dev, 0, sizeof dev); |
| dev.name = device; |
| dev.param = param; |
| dev.forever = forever; |
| dev.test = test; |
| return handle_testdev (&dev) != &dev; |
| } |
| |
| /* wait for tests to complete */ |
| for (entry = testdevs; entry; entry = entry->next) { |
| void *retval; |
| |
| if (pthread_join (entry->thread, &retval)) |
| perror ("pthread_join"); |
| /* testing errors discarded! */ |
| } |
| |
| return 0; |
| } |