| /* |
| * SH SCI SPI interface |
| * |
| * Copyright (c) 2008 Magnus Damm |
| * |
| * Based on S3C24XX GPIO based SPI driver, which is: |
| * Copyright (c) 2006 Ben Dooks |
| * Copyright (c) 2006 Simtec Electronics |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/spinlock.h> |
| #include <linux/workqueue.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/spi/spi.h> |
| #include <linux/spi/spi_bitbang.h> |
| |
| #include <asm/spi.h> |
| #include <asm/io.h> |
| |
| struct sh_sci_spi { |
| struct spi_bitbang bitbang; |
| |
| void __iomem *membase; |
| unsigned char val; |
| struct sh_spi_info *info; |
| struct platform_device *dev; |
| }; |
| |
| #define SCSPTR(sp) (sp->membase + 0x1c) |
| #define PIN_SCK (1 << 2) |
| #define PIN_TXD (1 << 0) |
| #define PIN_RXD PIN_TXD |
| #define PIN_INIT ((1 << 1) | (1 << 3) | PIN_SCK | PIN_TXD) |
| |
| static inline void setbits(struct sh_sci_spi *sp, int bits, int on) |
| { |
| /* |
| * We are the only user of SCSPTR so no locking is required. |
| * Reading bit 2 and 0 in SCSPTR gives pin state as input. |
| * Writing the same bits sets the output value. |
| * This makes regular read-modify-write difficult so we |
| * use sp->val to keep track of the latest register value. |
| */ |
| |
| if (on) |
| sp->val |= bits; |
| else |
| sp->val &= ~bits; |
| |
| iowrite8(sp->val, SCSPTR(sp)); |
| } |
| |
| static inline void setsck(struct spi_device *dev, int on) |
| { |
| setbits(spi_master_get_devdata(dev->master), PIN_SCK, on); |
| } |
| |
| static inline void setmosi(struct spi_device *dev, int on) |
| { |
| setbits(spi_master_get_devdata(dev->master), PIN_TXD, on); |
| } |
| |
| static inline u32 getmiso(struct spi_device *dev) |
| { |
| struct sh_sci_spi *sp = spi_master_get_devdata(dev->master); |
| |
| return (ioread8(SCSPTR(sp)) & PIN_RXD) ? 1 : 0; |
| } |
| |
| #define spidelay(x) ndelay(x) |
| |
| #include "spi-bitbang-txrx.h" |
| |
| static u32 sh_sci_spi_txrx_mode0(struct spi_device *spi, |
| unsigned nsecs, u32 word, u8 bits) |
| { |
| return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits); |
| } |
| |
| static u32 sh_sci_spi_txrx_mode1(struct spi_device *spi, |
| unsigned nsecs, u32 word, u8 bits) |
| { |
| return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits); |
| } |
| |
| static u32 sh_sci_spi_txrx_mode2(struct spi_device *spi, |
| unsigned nsecs, u32 word, u8 bits) |
| { |
| return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits); |
| } |
| |
| static u32 sh_sci_spi_txrx_mode3(struct spi_device *spi, |
| unsigned nsecs, u32 word, u8 bits) |
| { |
| return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits); |
| } |
| |
| static void sh_sci_spi_chipselect(struct spi_device *dev, int value) |
| { |
| struct sh_sci_spi *sp = spi_master_get_devdata(dev->master); |
| |
| if (sp->info && sp->info->chip_select) |
| (sp->info->chip_select)(sp->info, dev->chip_select, value); |
| } |
| |
| static int sh_sci_spi_probe(struct platform_device *dev) |
| { |
| struct resource *r; |
| struct spi_master *master; |
| struct sh_sci_spi *sp; |
| int ret; |
| |
| master = spi_alloc_master(&dev->dev, sizeof(struct sh_sci_spi)); |
| if (master == NULL) { |
| dev_err(&dev->dev, "failed to allocate spi master\n"); |
| ret = -ENOMEM; |
| goto err0; |
| } |
| |
| sp = spi_master_get_devdata(master); |
| |
| platform_set_drvdata(dev, sp); |
| sp->info = dev->dev.platform_data; |
| |
| /* setup spi bitbang adaptor */ |
| sp->bitbang.master = spi_master_get(master); |
| sp->bitbang.master->bus_num = sp->info->bus_num; |
| sp->bitbang.master->num_chipselect = sp->info->num_chipselect; |
| sp->bitbang.chipselect = sh_sci_spi_chipselect; |
| |
| sp->bitbang.txrx_word[SPI_MODE_0] = sh_sci_spi_txrx_mode0; |
| sp->bitbang.txrx_word[SPI_MODE_1] = sh_sci_spi_txrx_mode1; |
| sp->bitbang.txrx_word[SPI_MODE_2] = sh_sci_spi_txrx_mode2; |
| sp->bitbang.txrx_word[SPI_MODE_3] = sh_sci_spi_txrx_mode3; |
| |
| r = platform_get_resource(dev, IORESOURCE_MEM, 0); |
| if (r == NULL) { |
| ret = -ENOENT; |
| goto err1; |
| } |
| sp->membase = ioremap(r->start, resource_size(r)); |
| if (!sp->membase) { |
| ret = -ENXIO; |
| goto err1; |
| } |
| sp->val = ioread8(SCSPTR(sp)); |
| setbits(sp, PIN_INIT, 1); |
| |
| ret = spi_bitbang_start(&sp->bitbang); |
| if (!ret) |
| return 0; |
| |
| setbits(sp, PIN_INIT, 0); |
| iounmap(sp->membase); |
| err1: |
| spi_master_put(sp->bitbang.master); |
| err0: |
| return ret; |
| } |
| |
| static int sh_sci_spi_remove(struct platform_device *dev) |
| { |
| struct sh_sci_spi *sp = platform_get_drvdata(dev); |
| |
| iounmap(sp->membase); |
| setbits(sp, PIN_INIT, 0); |
| spi_bitbang_stop(&sp->bitbang); |
| spi_master_put(sp->bitbang.master); |
| return 0; |
| } |
| |
| static struct platform_driver sh_sci_spi_drv = { |
| .probe = sh_sci_spi_probe, |
| .remove = sh_sci_spi_remove, |
| .driver = { |
| .name = "spi_sh_sci", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| module_platform_driver(sh_sci_spi_drv); |
| |
| MODULE_DESCRIPTION("SH SCI SPI Driver"); |
| MODULE_AUTHOR("Magnus Damm <damm@opensource.se>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:spi_sh_sci"); |