| /* |
| * drivers/mtd/nand/ts7250.c |
| * |
| * Copyright (C) 2004 Technologic Systems (support@embeddedARM.com) |
| * |
| * Derived from drivers/mtd/nand/edb7312.c |
| * Copyright (C) 2004 Marius Gröger (mag@sysgo.de) |
| * |
| * Derived from drivers/mtd/nand/autcpu12.c |
| * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Overview: |
| * This is a device driver for the NAND flash device found on the |
| * TS-7250 board which utilizes a Samsung 32 Mbyte part. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/io.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/ts72xx.h> |
| |
| #include <asm/sizes.h> |
| #include <asm/mach-types.h> |
| |
| /* |
| * MTD structure for TS7250 board |
| */ |
| static struct mtd_info *ts7250_mtd = NULL; |
| |
| #ifdef CONFIG_MTD_PARTITIONS |
| static const char *part_probes[] = { "cmdlinepart", NULL }; |
| |
| #define NUM_PARTITIONS 3 |
| |
| /* |
| * Define static partitions for flash device |
| */ |
| static struct mtd_partition partition_info32[] = { |
| { |
| .name = "TS-BOOTROM", |
| .offset = 0x00000000, |
| .size = 0x00004000, |
| }, { |
| .name = "Linux", |
| .offset = 0x00004000, |
| .size = 0x01d00000, |
| }, { |
| .name = "RedBoot", |
| .offset = 0x01d04000, |
| .size = 0x002fc000, |
| }, |
| }; |
| |
| /* |
| * Define static partitions for flash device |
| */ |
| static struct mtd_partition partition_info128[] = { |
| { |
| .name = "TS-BOOTROM", |
| .offset = 0x00000000, |
| .size = 0x00004000, |
| }, { |
| .name = "Linux", |
| .offset = 0x00004000, |
| .size = 0x07d00000, |
| }, { |
| .name = "RedBoot", |
| .offset = 0x07d04000, |
| .size = 0x002fc000, |
| }, |
| }; |
| #endif |
| |
| |
| /* |
| * hardware specific access to control-lines |
| * |
| * ctrl: |
| * NAND_NCE: bit 0 -> bit 2 |
| * NAND_CLE: bit 1 -> bit 1 |
| * NAND_ALE: bit 2 -> bit 0 |
| */ |
| static void ts7250_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) |
| { |
| struct nand_chip *chip = mtd->priv; |
| |
| if (ctrl & NAND_CTRL_CHANGE) { |
| unsigned long addr = TS72XX_NAND_CONTROL_VIRT_BASE; |
| unsigned char bits; |
| |
| bits = (ctrl & NAND_NCE) << 2; |
| bits |= ctrl & NAND_CLE; |
| bits |= (ctrl & NAND_ALE) >> 2; |
| |
| __raw_writeb((__raw_readb(addr) & ~0x7) | bits, addr); |
| } |
| |
| if (cmd != NAND_CMD_NONE) |
| writeb(cmd, chip->IO_ADDR_W); |
| } |
| |
| /* |
| * read device ready pin |
| */ |
| static int ts7250_device_ready(struct mtd_info *mtd) |
| { |
| return __raw_readb(TS72XX_NAND_BUSY_VIRT_BASE) & 0x20; |
| } |
| |
| /* |
| * Main initialization routine |
| */ |
| static int __init ts7250_init(void) |
| { |
| struct nand_chip *this; |
| const char *part_type = 0; |
| int mtd_parts_nb = 0; |
| struct mtd_partition *mtd_parts = 0; |
| |
| if (!machine_is_ts72xx() || board_is_ts7200()) |
| return -ENXIO; |
| |
| /* Allocate memory for MTD device structure and private data */ |
| ts7250_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); |
| if (!ts7250_mtd) { |
| printk("Unable to allocate TS7250 NAND MTD device structure.\n"); |
| return -ENOMEM; |
| } |
| |
| /* Get pointer to private data */ |
| this = (struct nand_chip *)(&ts7250_mtd[1]); |
| |
| /* Initialize structures */ |
| memset(ts7250_mtd, 0, sizeof(struct mtd_info)); |
| memset(this, 0, sizeof(struct nand_chip)); |
| |
| /* Link the private data with the MTD structure */ |
| ts7250_mtd->priv = this; |
| ts7250_mtd->owner = THIS_MODULE; |
| |
| /* insert callbacks */ |
| this->IO_ADDR_R = (void *)TS72XX_NAND_DATA_VIRT_BASE; |
| this->IO_ADDR_W = (void *)TS72XX_NAND_DATA_VIRT_BASE; |
| this->cmd_ctrl = ts7250_hwcontrol; |
| this->dev_ready = ts7250_device_ready; |
| this->chip_delay = 15; |
| this->ecc.mode = NAND_ECC_SOFT; |
| |
| printk("Searching for NAND flash...\n"); |
| /* Scan to find existence of the device */ |
| if (nand_scan(ts7250_mtd, 1)) { |
| kfree(ts7250_mtd); |
| return -ENXIO; |
| } |
| #ifdef CONFIG_MTD_PARTITIONS |
| ts7250_mtd->name = "ts7250-nand"; |
| mtd_parts_nb = parse_mtd_partitions(ts7250_mtd, part_probes, &mtd_parts, 0); |
| if (mtd_parts_nb > 0) |
| part_type = "command line"; |
| else |
| mtd_parts_nb = 0; |
| #endif |
| if (mtd_parts_nb == 0) { |
| mtd_parts = partition_info32; |
| if (ts7250_mtd->size >= (128 * 0x100000)) |
| mtd_parts = partition_info128; |
| mtd_parts_nb = NUM_PARTITIONS; |
| part_type = "static"; |
| } |
| |
| /* Register the partitions */ |
| printk(KERN_NOTICE "Using %s partition definition\n", part_type); |
| add_mtd_partitions(ts7250_mtd, mtd_parts, mtd_parts_nb); |
| |
| /* Return happy */ |
| return 0; |
| } |
| |
| module_init(ts7250_init); |
| |
| /* |
| * Clean up routine |
| */ |
| static void __exit ts7250_cleanup(void) |
| { |
| /* Unregister the device */ |
| del_mtd_device(ts7250_mtd); |
| |
| /* Free the MTD device structure */ |
| kfree(ts7250_mtd); |
| } |
| |
| module_exit(ts7250_cleanup); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Jesse Off <joff@embeddedARM.com>"); |
| MODULE_DESCRIPTION("MTD map driver for Technologic Systems TS-7250 board"); |