| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/export.h> |
| #include <linux/suspend.h> |
| #include <linux/bcd.h> |
| #include <asm/uaccess.h> |
| |
| #include <acpi/acpi_bus.h> |
| #include <acpi/acpi_drivers.h> |
| |
| #ifdef CONFIG_X86 |
| #include <linux/mc146818rtc.h> |
| #endif |
| |
| #include "sleep.h" |
| |
| #define _COMPONENT ACPI_SYSTEM_COMPONENT |
| |
| /* |
| * this file provides support for: |
| * /proc/acpi/alarm |
| * /proc/acpi/wakeup |
| */ |
| |
| ACPI_MODULE_NAME("sleep") |
| |
| #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || !defined(CONFIG_X86) |
| /* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */ |
| #else |
| #define HAVE_ACPI_LEGACY_ALARM |
| #endif |
| |
| #ifdef HAVE_ACPI_LEGACY_ALARM |
| |
| static u32 cmos_bcd_read(int offset, int rtc_control); |
| |
| static int acpi_system_alarm_seq_show(struct seq_file *seq, void *offset) |
| { |
| u32 sec, min, hr; |
| u32 day, mo, yr, cent = 0; |
| u32 today = 0; |
| unsigned char rtc_control = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&rtc_lock, flags); |
| |
| rtc_control = CMOS_READ(RTC_CONTROL); |
| sec = cmos_bcd_read(RTC_SECONDS_ALARM, rtc_control); |
| min = cmos_bcd_read(RTC_MINUTES_ALARM, rtc_control); |
| hr = cmos_bcd_read(RTC_HOURS_ALARM, rtc_control); |
| |
| /* If we ever get an FACP with proper values... */ |
| if (acpi_gbl_FADT.day_alarm) { |
| /* ACPI spec: only low 6 its should be cared */ |
| day = CMOS_READ(acpi_gbl_FADT.day_alarm) & 0x3F; |
| if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) |
| day = bcd2bin(day); |
| } else |
| day = cmos_bcd_read(RTC_DAY_OF_MONTH, rtc_control); |
| if (acpi_gbl_FADT.month_alarm) |
| mo = cmos_bcd_read(acpi_gbl_FADT.month_alarm, rtc_control); |
| else { |
| mo = cmos_bcd_read(RTC_MONTH, rtc_control); |
| today = cmos_bcd_read(RTC_DAY_OF_MONTH, rtc_control); |
| } |
| if (acpi_gbl_FADT.century) |
| cent = cmos_bcd_read(acpi_gbl_FADT.century, rtc_control); |
| |
| yr = cmos_bcd_read(RTC_YEAR, rtc_control); |
| |
| spin_unlock_irqrestore(&rtc_lock, flags); |
| |
| /* we're trusting the FADT (see above) */ |
| if (!acpi_gbl_FADT.century) |
| /* If we're not trusting the FADT, we should at least make it |
| * right for _this_ century... ehm, what is _this_ century? |
| * |
| * TBD: |
| * ASAP: find piece of code in the kernel, e.g. star tracker driver, |
| * which we can trust to determine the century correctly. Atom |
| * watch driver would be nice, too... |
| * |
| * if that has not happened, change for first release in 2050: |
| * if (yr<50) |
| * yr += 2100; |
| * else |
| * yr += 2000; // current line of code |
| * |
| * if that has not happened either, please do on 2099/12/31:23:59:59 |
| * s/2000/2100 |
| * |
| */ |
| yr += 2000; |
| else |
| yr += cent * 100; |
| |
| /* |
| * Show correct dates for alarms up to a month into the future. |
| * This solves issues for nearly all situations with the common |
| * 30-day alarm clocks in PC hardware. |
| */ |
| if (day < today) { |
| if (mo < 12) { |
| mo += 1; |
| } else { |
| mo = 1; |
| yr += 1; |
| } |
| } |
| |
| seq_printf(seq, "%4.4u-", yr); |
| (mo > 12) ? seq_puts(seq, "**-") : seq_printf(seq, "%2.2u-", mo); |
| (day > 31) ? seq_puts(seq, "** ") : seq_printf(seq, "%2.2u ", day); |
| (hr > 23) ? seq_puts(seq, "**:") : seq_printf(seq, "%2.2u:", hr); |
| (min > 59) ? seq_puts(seq, "**:") : seq_printf(seq, "%2.2u:", min); |
| (sec > 59) ? seq_puts(seq, "**\n") : seq_printf(seq, "%2.2u\n", sec); |
| |
| return 0; |
| } |
| |
| static int acpi_system_alarm_open_fs(struct inode *inode, struct file *file) |
| { |
| return single_open(file, acpi_system_alarm_seq_show, PDE_DATA(inode)); |
| } |
| |
| static int get_date_field(char **p, u32 * value) |
| { |
| char *next = NULL; |
| char *string_end = NULL; |
| int result = -EINVAL; |
| |
| /* |
| * Try to find delimeter, only to insert null. The end of the |
| * string won't have one, but is still valid. |
| */ |
| if (*p == NULL) |
| return result; |
| |
| next = strpbrk(*p, "- :"); |
| if (next) |
| *next++ = '\0'; |
| |
| *value = simple_strtoul(*p, &string_end, 10); |
| |
| /* Signal success if we got a good digit */ |
| if (string_end != *p) |
| result = 0; |
| |
| if (next) |
| *p = next; |
| else |
| *p = NULL; |
| |
| return result; |
| } |
| |
| /* Read a possibly BCD register, always return binary */ |
| static u32 cmos_bcd_read(int offset, int rtc_control) |
| { |
| u32 val = CMOS_READ(offset); |
| if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) |
| val = bcd2bin(val); |
| return val; |
| } |
| |
| /* Write binary value into possibly BCD register */ |
| static void cmos_bcd_write(u32 val, int offset, int rtc_control) |
| { |
| if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) |
| val = bin2bcd(val); |
| CMOS_WRITE(val, offset); |
| } |
| |
| static ssize_t |
| acpi_system_write_alarm(struct file *file, |
| const char __user * buffer, size_t count, loff_t * ppos) |
| { |
| int result = 0; |
| char alarm_string[30] = { '\0' }; |
| char *p = alarm_string; |
| u32 sec, min, hr, day, mo, yr; |
| int adjust = 0; |
| unsigned char rtc_control = 0; |
| |
| if (count > sizeof(alarm_string) - 1) |
| return -EINVAL; |
| |
| if (copy_from_user(alarm_string, buffer, count)) |
| return -EFAULT; |
| |
| alarm_string[count] = '\0'; |
| |
| /* check for time adjustment */ |
| if (alarm_string[0] == '+') { |
| p++; |
| adjust = 1; |
| } |
| |
| if ((result = get_date_field(&p, &yr))) |
| goto end; |
| if ((result = get_date_field(&p, &mo))) |
| goto end; |
| if ((result = get_date_field(&p, &day))) |
| goto end; |
| if ((result = get_date_field(&p, &hr))) |
| goto end; |
| if ((result = get_date_field(&p, &min))) |
| goto end; |
| if ((result = get_date_field(&p, &sec))) |
| goto end; |
| |
| spin_lock_irq(&rtc_lock); |
| |
| rtc_control = CMOS_READ(RTC_CONTROL); |
| |
| if (adjust) { |
| yr += cmos_bcd_read(RTC_YEAR, rtc_control); |
| mo += cmos_bcd_read(RTC_MONTH, rtc_control); |
| day += cmos_bcd_read(RTC_DAY_OF_MONTH, rtc_control); |
| hr += cmos_bcd_read(RTC_HOURS, rtc_control); |
| min += cmos_bcd_read(RTC_MINUTES, rtc_control); |
| sec += cmos_bcd_read(RTC_SECONDS, rtc_control); |
| } |
| |
| spin_unlock_irq(&rtc_lock); |
| |
| if (sec > 59) { |
| min += sec/60; |
| sec = sec%60; |
| } |
| if (min > 59) { |
| hr += min/60; |
| min = min%60; |
| } |
| if (hr > 23) { |
| day += hr/24; |
| hr = hr%24; |
| } |
| if (day > 31) { |
| mo += day/32; |
| day = day%32; |
| } |
| if (mo > 12) { |
| yr += mo/13; |
| mo = mo%13; |
| } |
| |
| spin_lock_irq(&rtc_lock); |
| /* |
| * Disable alarm interrupt before setting alarm timer or else |
| * when ACPI_EVENT_RTC is enabled, a spurious ACPI interrupt occurs |
| */ |
| rtc_control &= ~RTC_AIE; |
| CMOS_WRITE(rtc_control, RTC_CONTROL); |
| CMOS_READ(RTC_INTR_FLAGS); |
| |
| /* write the fields the rtc knows about */ |
| cmos_bcd_write(hr, RTC_HOURS_ALARM, rtc_control); |
| cmos_bcd_write(min, RTC_MINUTES_ALARM, rtc_control); |
| cmos_bcd_write(sec, RTC_SECONDS_ALARM, rtc_control); |
| |
| /* |
| * If the system supports an enhanced alarm it will have non-zero |
| * offsets into the CMOS RAM here -- which for some reason are pointing |
| * to the RTC area of memory. |
| */ |
| if (acpi_gbl_FADT.day_alarm) |
| cmos_bcd_write(day, acpi_gbl_FADT.day_alarm, rtc_control); |
| if (acpi_gbl_FADT.month_alarm) |
| cmos_bcd_write(mo, acpi_gbl_FADT.month_alarm, rtc_control); |
| if (acpi_gbl_FADT.century) { |
| if (adjust) |
| yr += cmos_bcd_read(acpi_gbl_FADT.century, rtc_control) * 100; |
| cmos_bcd_write(yr / 100, acpi_gbl_FADT.century, rtc_control); |
| } |
| /* enable the rtc alarm interrupt */ |
| rtc_control |= RTC_AIE; |
| CMOS_WRITE(rtc_control, RTC_CONTROL); |
| CMOS_READ(RTC_INTR_FLAGS); |
| |
| spin_unlock_irq(&rtc_lock); |
| |
| acpi_clear_event(ACPI_EVENT_RTC); |
| acpi_enable_event(ACPI_EVENT_RTC, 0); |
| |
| *ppos += count; |
| |
| result = 0; |
| end: |
| return result ? result : count; |
| } |
| #endif /* HAVE_ACPI_LEGACY_ALARM */ |
| |
| static int |
| acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) |
| { |
| struct list_head *node, *next; |
| |
| seq_printf(seq, "Device\tS-state\t Status Sysfs node\n"); |
| |
| mutex_lock(&acpi_device_lock); |
| list_for_each_safe(node, next, &acpi_wakeup_device_list) { |
| struct acpi_device *dev = |
| container_of(node, struct acpi_device, wakeup_list); |
| struct acpi_device_physical_node *entry; |
| |
| if (!dev->wakeup.flags.valid) |
| continue; |
| |
| seq_printf(seq, "%s\t S%d\t", |
| dev->pnp.bus_id, |
| (u32) dev->wakeup.sleep_state); |
| |
| if (!dev->physical_node_count) { |
| seq_printf(seq, "%c%-8s\n", |
| dev->wakeup.flags.run_wake ? '*' : ' ', |
| device_may_wakeup(&dev->dev) ? |
| "enabled" : "disabled"); |
| } else { |
| struct device *ldev; |
| list_for_each_entry(entry, &dev->physical_node_list, |
| node) { |
| ldev = get_device(entry->dev); |
| if (!ldev) |
| continue; |
| |
| if (&entry->node != |
| dev->physical_node_list.next) |
| seq_printf(seq, "\t\t"); |
| |
| seq_printf(seq, "%c%-8s %s:%s\n", |
| dev->wakeup.flags.run_wake ? '*' : ' ', |
| (device_may_wakeup(&dev->dev) || |
| (ldev && device_may_wakeup(ldev))) ? |
| "enabled" : "disabled", |
| ldev->bus ? ldev->bus->name : |
| "no-bus", dev_name(ldev)); |
| put_device(ldev); |
| } |
| } |
| } |
| mutex_unlock(&acpi_device_lock); |
| return 0; |
| } |
| |
| static void physical_device_enable_wakeup(struct acpi_device *adev) |
| { |
| struct acpi_device_physical_node *entry; |
| |
| list_for_each_entry(entry, |
| &adev->physical_node_list, node) |
| if (entry->dev && device_can_wakeup(entry->dev)) { |
| bool enable = !device_may_wakeup(entry->dev); |
| device_set_wakeup_enable(entry->dev, enable); |
| } |
| } |
| |
| static ssize_t |
| acpi_system_write_wakeup_device(struct file *file, |
| const char __user * buffer, |
| size_t count, loff_t * ppos) |
| { |
| struct list_head *node, *next; |
| char strbuf[5]; |
| char str[5] = ""; |
| |
| if (count > 4) |
| count = 4; |
| |
| if (copy_from_user(strbuf, buffer, count)) |
| return -EFAULT; |
| strbuf[count] = '\0'; |
| sscanf(strbuf, "%s", str); |
| |
| mutex_lock(&acpi_device_lock); |
| list_for_each_safe(node, next, &acpi_wakeup_device_list) { |
| struct acpi_device *dev = |
| container_of(node, struct acpi_device, wakeup_list); |
| if (!dev->wakeup.flags.valid) |
| continue; |
| |
| if (!strncmp(dev->pnp.bus_id, str, 4)) { |
| if (device_can_wakeup(&dev->dev)) { |
| bool enable = !device_may_wakeup(&dev->dev); |
| device_set_wakeup_enable(&dev->dev, enable); |
| } else { |
| physical_device_enable_wakeup(dev); |
| } |
| break; |
| } |
| } |
| mutex_unlock(&acpi_device_lock); |
| return count; |
| } |
| |
| static int |
| acpi_system_wakeup_device_open_fs(struct inode *inode, struct file *file) |
| { |
| return single_open(file, acpi_system_wakeup_device_seq_show, |
| PDE_DATA(inode)); |
| } |
| |
| static const struct file_operations acpi_system_wakeup_device_fops = { |
| .owner = THIS_MODULE, |
| .open = acpi_system_wakeup_device_open_fs, |
| .read = seq_read, |
| .write = acpi_system_write_wakeup_device, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| #ifdef HAVE_ACPI_LEGACY_ALARM |
| static const struct file_operations acpi_system_alarm_fops = { |
| .owner = THIS_MODULE, |
| .open = acpi_system_alarm_open_fs, |
| .read = seq_read, |
| .write = acpi_system_write_alarm, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static u32 rtc_handler(void *context) |
| { |
| acpi_clear_event(ACPI_EVENT_RTC); |
| acpi_disable_event(ACPI_EVENT_RTC, 0); |
| |
| return ACPI_INTERRUPT_HANDLED; |
| } |
| #endif /* HAVE_ACPI_LEGACY_ALARM */ |
| |
| int __init acpi_sleep_proc_init(void) |
| { |
| #ifdef HAVE_ACPI_LEGACY_ALARM |
| /* 'alarm' [R/W] */ |
| proc_create("alarm", S_IFREG | S_IRUGO | S_IWUSR, |
| acpi_root_dir, &acpi_system_alarm_fops); |
| |
| acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); |
| /* |
| * Disable the RTC event after installing RTC handler. |
| * Only when RTC alarm is set will it be enabled. |
| */ |
| acpi_clear_event(ACPI_EVENT_RTC); |
| acpi_disable_event(ACPI_EVENT_RTC, 0); |
| #endif /* HAVE_ACPI_LEGACY_ALARM */ |
| |
| /* 'wakeup device' [R/W] */ |
| proc_create("wakeup", S_IFREG | S_IRUGO | S_IWUSR, |
| acpi_root_dir, &acpi_system_wakeup_device_fops); |
| |
| return 0; |
| } |