| /* |
| * Copyright (C) 2015 Broadcom |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /** |
| * DOC: VC4 HVS module. |
| * |
| * The HVS is the piece of hardware that does translation, scaling, |
| * colorspace conversion, and compositing of pixels stored in |
| * framebuffers into a FIFO of pixels going out to the Pixel Valve |
| * (CRTC). It operates at the system clock rate (the system audio |
| * clock gate, specifically), which is much higher than the pixel |
| * clock rate. |
| * |
| * There is a single global HVS, with multiple output FIFOs that can |
| * be consumed by the PVs. This file just manages the resources for |
| * the HVS, while the vc4_crtc.c code actually drives HVS setup for |
| * each CRTC. |
| */ |
| |
| #include "linux/component.h" |
| #include "vc4_drv.h" |
| #include "vc4_regs.h" |
| |
| #define HVS_REG(reg) { reg, #reg } |
| static const struct { |
| u32 reg; |
| const char *name; |
| } hvs_regs[] = { |
| HVS_REG(SCALER_DISPCTRL), |
| HVS_REG(SCALER_DISPSTAT), |
| HVS_REG(SCALER_DISPID), |
| HVS_REG(SCALER_DISPECTRL), |
| HVS_REG(SCALER_DISPPROF), |
| HVS_REG(SCALER_DISPDITHER), |
| HVS_REG(SCALER_DISPEOLN), |
| HVS_REG(SCALER_DISPLIST0), |
| HVS_REG(SCALER_DISPLIST1), |
| HVS_REG(SCALER_DISPLIST2), |
| HVS_REG(SCALER_DISPLSTAT), |
| HVS_REG(SCALER_DISPLACT0), |
| HVS_REG(SCALER_DISPLACT1), |
| HVS_REG(SCALER_DISPLACT2), |
| HVS_REG(SCALER_DISPCTRL0), |
| HVS_REG(SCALER_DISPBKGND0), |
| HVS_REG(SCALER_DISPSTAT0), |
| HVS_REG(SCALER_DISPBASE0), |
| HVS_REG(SCALER_DISPCTRL1), |
| HVS_REG(SCALER_DISPBKGND1), |
| HVS_REG(SCALER_DISPSTAT1), |
| HVS_REG(SCALER_DISPBASE1), |
| HVS_REG(SCALER_DISPCTRL2), |
| HVS_REG(SCALER_DISPBKGND2), |
| HVS_REG(SCALER_DISPSTAT2), |
| HVS_REG(SCALER_DISPBASE2), |
| HVS_REG(SCALER_DISPALPHA2), |
| }; |
| |
| void vc4_hvs_dump_state(struct drm_device *dev) |
| { |
| struct vc4_dev *vc4 = to_vc4_dev(dev); |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(hvs_regs); i++) { |
| DRM_INFO("0x%04x (%s): 0x%08x\n", |
| hvs_regs[i].reg, hvs_regs[i].name, |
| HVS_READ(hvs_regs[i].reg)); |
| } |
| |
| DRM_INFO("HVS ctx:\n"); |
| for (i = 0; i < 64; i += 4) { |
| DRM_INFO("0x%08x (%s): 0x%08x 0x%08x 0x%08x 0x%08x\n", |
| i * 4, i < HVS_BOOTLOADER_DLIST_END ? "B" : "D", |
| readl((u32 __iomem *)vc4->hvs->dlist + i + 0), |
| readl((u32 __iomem *)vc4->hvs->dlist + i + 1), |
| readl((u32 __iomem *)vc4->hvs->dlist + i + 2), |
| readl((u32 __iomem *)vc4->hvs->dlist + i + 3)); |
| } |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| int vc4_hvs_debugfs_regs(struct seq_file *m, void *unused) |
| { |
| struct drm_info_node *node = (struct drm_info_node *)m->private; |
| struct drm_device *dev = node->minor->dev; |
| struct vc4_dev *vc4 = to_vc4_dev(dev); |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(hvs_regs); i++) { |
| seq_printf(m, "%s (0x%04x): 0x%08x\n", |
| hvs_regs[i].name, hvs_regs[i].reg, |
| HVS_READ(hvs_regs[i].reg)); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| /* The filter kernel is composed of dwords each containing 3 9-bit |
| * signed integers packed next to each other. |
| */ |
| #define VC4_INT_TO_COEFF(coeff) (coeff & 0x1ff) |
| #define VC4_PPF_FILTER_WORD(c0, c1, c2) \ |
| ((((c0) & 0x1ff) << 0) | \ |
| (((c1) & 0x1ff) << 9) | \ |
| (((c2) & 0x1ff) << 18)) |
| |
| /* The whole filter kernel is arranged as the coefficients 0-16 going |
| * up, then a pad, then 17-31 going down and reversed within the |
| * dwords. This means that a linear phase kernel (where it's |
| * symmetrical at the boundary between 15 and 16) has the last 5 |
| * dwords matching the first 5, but reversed. |
| */ |
| #define VC4_LINEAR_PHASE_KERNEL(c0, c1, c2, c3, c4, c5, c6, c7, c8, \ |
| c9, c10, c11, c12, c13, c14, c15) \ |
| {VC4_PPF_FILTER_WORD(c0, c1, c2), \ |
| VC4_PPF_FILTER_WORD(c3, c4, c5), \ |
| VC4_PPF_FILTER_WORD(c6, c7, c8), \ |
| VC4_PPF_FILTER_WORD(c9, c10, c11), \ |
| VC4_PPF_FILTER_WORD(c12, c13, c14), \ |
| VC4_PPF_FILTER_WORD(c15, c15, 0)} |
| |
| #define VC4_LINEAR_PHASE_KERNEL_DWORDS 6 |
| #define VC4_KERNEL_DWORDS (VC4_LINEAR_PHASE_KERNEL_DWORDS * 2 - 1) |
| |
| /* Recommended B=1/3, C=1/3 filter choice from Mitchell/Netravali. |
| * http://www.cs.utexas.edu/~fussell/courses/cs384g/lectures/mitchell/Mitchell.pdf |
| */ |
| static const u32 mitchell_netravali_1_3_1_3_kernel[] = |
| VC4_LINEAR_PHASE_KERNEL(0, -2, -6, -8, -10, -8, -3, 2, 18, |
| 50, 82, 119, 155, 187, 213, 227); |
| |
| static int vc4_hvs_upload_linear_kernel(struct vc4_hvs *hvs, |
| struct drm_mm_node *space, |
| const u32 *kernel) |
| { |
| int ret, i; |
| u32 __iomem *dst_kernel; |
| |
| ret = drm_mm_insert_node(&hvs->dlist_mm, space, VC4_KERNEL_DWORDS, 1, |
| 0); |
| if (ret) { |
| DRM_ERROR("Failed to allocate space for filter kernel: %d\n", |
| ret); |
| return ret; |
| } |
| |
| dst_kernel = hvs->dlist + space->start; |
| |
| for (i = 0; i < VC4_KERNEL_DWORDS; i++) { |
| if (i < VC4_LINEAR_PHASE_KERNEL_DWORDS) |
| writel(kernel[i], &dst_kernel[i]); |
| else { |
| writel(kernel[VC4_KERNEL_DWORDS - i - 1], |
| &dst_kernel[i]); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int vc4_hvs_bind(struct device *dev, struct device *master, void *data) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct drm_device *drm = dev_get_drvdata(master); |
| struct vc4_dev *vc4 = drm->dev_private; |
| struct vc4_hvs *hvs = NULL; |
| int ret; |
| |
| hvs = devm_kzalloc(&pdev->dev, sizeof(*hvs), GFP_KERNEL); |
| if (!hvs) |
| return -ENOMEM; |
| |
| hvs->pdev = pdev; |
| |
| hvs->regs = vc4_ioremap_regs(pdev, 0); |
| if (IS_ERR(hvs->regs)) |
| return PTR_ERR(hvs->regs); |
| |
| hvs->dlist = hvs->regs + SCALER_DLIST_START; |
| |
| spin_lock_init(&hvs->mm_lock); |
| |
| /* Set up the HVS display list memory manager. We never |
| * overwrite the setup from the bootloader (just 128b out of |
| * our 16K), since we don't want to scramble the screen when |
| * transitioning from the firmware's boot setup to runtime. |
| */ |
| drm_mm_init(&hvs->dlist_mm, |
| HVS_BOOTLOADER_DLIST_END, |
| (SCALER_DLIST_SIZE >> 2) - HVS_BOOTLOADER_DLIST_END); |
| |
| /* Set up the HVS LBM memory manager. We could have some more |
| * complicated data structure that allowed reuse of LBM areas |
| * between planes when they don't overlap on the screen, but |
| * for now we just allocate globally. |
| */ |
| drm_mm_init(&hvs->lbm_mm, 0, 96 * 1024); |
| |
| /* Upload filter kernels. We only have the one for now, so we |
| * keep it around for the lifetime of the driver. |
| */ |
| ret = vc4_hvs_upload_linear_kernel(hvs, |
| &hvs->mitchell_netravali_filter, |
| mitchell_netravali_1_3_1_3_kernel); |
| if (ret) |
| return ret; |
| |
| vc4->hvs = hvs; |
| return 0; |
| } |
| |
| static void vc4_hvs_unbind(struct device *dev, struct device *master, |
| void *data) |
| { |
| struct drm_device *drm = dev_get_drvdata(master); |
| struct vc4_dev *vc4 = drm->dev_private; |
| |
| if (vc4->hvs->mitchell_netravali_filter.allocated) |
| drm_mm_remove_node(&vc4->hvs->mitchell_netravali_filter); |
| |
| drm_mm_takedown(&vc4->hvs->dlist_mm); |
| drm_mm_takedown(&vc4->hvs->lbm_mm); |
| |
| vc4->hvs = NULL; |
| } |
| |
| static const struct component_ops vc4_hvs_ops = { |
| .bind = vc4_hvs_bind, |
| .unbind = vc4_hvs_unbind, |
| }; |
| |
| static int vc4_hvs_dev_probe(struct platform_device *pdev) |
| { |
| return component_add(&pdev->dev, &vc4_hvs_ops); |
| } |
| |
| static int vc4_hvs_dev_remove(struct platform_device *pdev) |
| { |
| component_del(&pdev->dev, &vc4_hvs_ops); |
| return 0; |
| } |
| |
| static const struct of_device_id vc4_hvs_dt_match[] = { |
| { .compatible = "brcm,bcm2835-hvs" }, |
| {} |
| }; |
| |
| struct platform_driver vc4_hvs_driver = { |
| .probe = vc4_hvs_dev_probe, |
| .remove = vc4_hvs_dev_remove, |
| .driver = { |
| .name = "vc4_hvs", |
| .of_match_table = vc4_hvs_dt_match, |
| }, |
| }; |