blob: 6fa58425466acba427099433b04f3e73fa2e723b [file] [log] [blame]
/*
* Copyright (c) 1996-2004 Russell King.
*
* Please note that this platform does not support 32-bit IDE IO.
*/
#include <linux/string.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/errno.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/scatterlist.h>
#include <linux/io.h>
#include <asm/dma.h>
#include <asm/ecard.h>
#define DRV_NAME "icside"
#define ICS_IDENT_OFFSET 0x2280
#define ICS_ARCIN_V5_INTRSTAT 0x0000
#define ICS_ARCIN_V5_INTROFFSET 0x0004
#define ICS_ARCIN_V5_IDEOFFSET 0x2800
#define ICS_ARCIN_V5_IDEALTOFFSET 0x2b80
#define ICS_ARCIN_V5_IDESTEPPING 6
#define ICS_ARCIN_V6_IDEOFFSET_1 0x2000
#define ICS_ARCIN_V6_INTROFFSET_1 0x2200
#define ICS_ARCIN_V6_INTRSTAT_1 0x2290
#define ICS_ARCIN_V6_IDEALTOFFSET_1 0x2380
#define ICS_ARCIN_V6_IDEOFFSET_2 0x3000
#define ICS_ARCIN_V6_INTROFFSET_2 0x3200
#define ICS_ARCIN_V6_INTRSTAT_2 0x3290
#define ICS_ARCIN_V6_IDEALTOFFSET_2 0x3380
#define ICS_ARCIN_V6_IDESTEPPING 6
struct cardinfo {
unsigned int dataoffset;
unsigned int ctrloffset;
unsigned int stepping;
};
static struct cardinfo icside_cardinfo_v5 = {
.dataoffset = ICS_ARCIN_V5_IDEOFFSET,
.ctrloffset = ICS_ARCIN_V5_IDEALTOFFSET,
.stepping = ICS_ARCIN_V5_IDESTEPPING,
};
static struct cardinfo icside_cardinfo_v6_1 = {
.dataoffset = ICS_ARCIN_V6_IDEOFFSET_1,
.ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_1,
.stepping = ICS_ARCIN_V6_IDESTEPPING,
};
static struct cardinfo icside_cardinfo_v6_2 = {
.dataoffset = ICS_ARCIN_V6_IDEOFFSET_2,
.ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_2,
.stepping = ICS_ARCIN_V6_IDESTEPPING,
};
struct icside_state {
unsigned int channel;
unsigned int enabled;
void __iomem *irq_port;
void __iomem *ioc_base;
unsigned int sel;
unsigned int type;
struct ide_host *host;
};
#define ICS_TYPE_A3IN 0
#define ICS_TYPE_A3USER 1
#define ICS_TYPE_V6 3
#define ICS_TYPE_V5 15
#define ICS_TYPE_NOTYPE ((unsigned int)-1)
/* ---------------- Version 5 PCB Support Functions --------------------- */
/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
* Purpose : enable interrupts from card
*/
static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
{
struct icside_state *state = ec->irq_data;
writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET);
}
/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
* Purpose : disable interrupts from card
*/
static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
{
struct icside_state *state = ec->irq_data;
readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET);
}
static const expansioncard_ops_t icside_ops_arcin_v5 = {
.irqenable = icside_irqenable_arcin_v5,
.irqdisable = icside_irqdisable_arcin_v5,
};
/* ---------------- Version 6 PCB Support Functions --------------------- */
/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
* Purpose : enable interrupts from card
*/
static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
{
struct icside_state *state = ec->irq_data;
void __iomem *base = state->irq_port;
state->enabled = 1;
switch (state->channel) {
case 0:
writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
readb(base + ICS_ARCIN_V6_INTROFFSET_2);
break;
case 1:
writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
readb(base + ICS_ARCIN_V6_INTROFFSET_1);
break;
}
}
/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
* Purpose : disable interrupts from card
*/
static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
{
struct icside_state *state = ec->irq_data;
state->enabled = 0;
readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
}
/* Prototype: icside_irqprobe(struct expansion_card *ec)
* Purpose : detect an active interrupt from card
*/
static int icside_irqpending_arcin_v6(struct expansion_card *ec)
{
struct icside_state *state = ec->irq_data;
return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
}
static const expansioncard_ops_t icside_ops_arcin_v6 = {
.irqenable = icside_irqenable_arcin_v6,
.irqdisable = icside_irqdisable_arcin_v6,
.irqpending = icside_irqpending_arcin_v6,
};
/*
* Handle routing of interrupts. This is called before
* we write the command to the drive.
*/
static void icside_maskproc(ide_drive_t *drive, int mask)
{
ide_hwif_t *hwif = HWIF(drive);
struct expansion_card *ec = ECARD_DEV(hwif->dev);
struct icside_state *state = ecard_get_drvdata(ec);
unsigned long flags;
local_irq_save(flags);
state->channel = hwif->channel;
if (state->enabled && !mask) {
switch (hwif->channel) {
case 0:
writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
break;
case 1:
writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
break;
}
} else {
readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
}
local_irq_restore(flags);
}
static const struct ide_port_ops icside_v6_no_dma_port_ops = {
.maskproc = icside_maskproc,
};
#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
/*
* SG-DMA support.
*
* Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
* There is only one DMA controller per card, which means that only
* one drive can be accessed at one time. NOTE! We do not enforce that
* here, but we rely on the main IDE driver spotting that both
* interfaces use the same IRQ, which should guarantee this.
*/
/*
* Configure the IOMD to give the appropriate timings for the transfer
* mode being requested. We take the advice of the ATA standards, and
* calculate the cycle time based on the transfer mode, and the EIDE
* MW DMA specs that the drive provides in the IDENTIFY command.
*
* We have the following IOMD DMA modes to choose from:
*
* Type Active Recovery Cycle
* A 250 (250) 312 (550) 562 (800)
* B 187 250 437
* C 125 (125) 125 (375) 250 (500)
* D 62 125 187
*
* (figures in brackets are actual measured timings)
*
* However, we also need to take care of the read/write active and
* recovery timings:
*
* Read Write
* Mode Active -- Recovery -- Cycle IOMD type
* MW0 215 50 215 480 A
* MW1 80 50 50 150 C
* MW2 70 25 25 120 C
*/
static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
{
int cycle_time, use_dma_info = 0;
switch (xfer_mode) {
case XFER_MW_DMA_2:
cycle_time = 250;
use_dma_info = 1;
break;
case XFER_MW_DMA_1:
cycle_time = 250;
use_dma_info = 1;
break;
case XFER_MW_DMA_0:
cycle_time = 480;
break;
case XFER_SW_DMA_2:
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
cycle_time = 480;
break;
}
/*
* If we're going to be doing MW_DMA_1 or MW_DMA_2, we should
* take care to note the values in the ID...
*/
if (use_dma_info && drive->id->eide_dma_time > cycle_time)
cycle_time = drive->id->eide_dma_time;
drive->drive_data = cycle_time;
printk("%s: %s selected (peak %dMB/s)\n", drive->name,
ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
}
static const struct ide_port_ops icside_v6_port_ops = {
.set_dma_mode = icside_set_dma_mode,
.maskproc = icside_maskproc,
};
static void icside_dma_host_set(ide_drive_t *drive, int on)
{
}
static int icside_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct expansion_card *ec = ECARD_DEV(hwif->dev);
drive->waiting_for_dma = 0;
disable_dma(ec->dma);
/* Teardown mappings after DMA has completed. */
ide_destroy_dmatable(drive);
return get_dma_residue(ec->dma) != 0;
}
static void icside_dma_start(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct expansion_card *ec = ECARD_DEV(hwif->dev);
/* We can not enable DMA on both channels simultaneously. */
BUG_ON(dma_channel_active(ec->dma));
enable_dma(ec->dma);
}
static int icside_dma_setup(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct expansion_card *ec = ECARD_DEV(hwif->dev);
struct icside_state *state = ecard_get_drvdata(ec);
struct request *rq = hwif->hwgroup->rq;
unsigned int dma_mode;
if (rq_data_dir(rq))
dma_mode = DMA_MODE_WRITE;
else
dma_mode = DMA_MODE_READ;
/*
* We can not enable DMA on both channels.
*/
BUG_ON(dma_channel_active(ec->dma));
hwif->sg_nents = ide_build_sglist(drive, rq);
/*
* Ensure that we have the right interrupt routed.
*/
icside_maskproc(drive, 0);
/*
* Route the DMA signals to the correct interface.
*/
writeb(state->sel | hwif->channel, state->ioc_base);
/*
* Select the correct timing for this drive.
*/
set_dma_speed(ec->dma, drive->drive_data);
/*
* Tell the DMA engine about the SG table and
* data direction.
*/
set_dma_sg(ec->dma, hwif->sg_table, hwif->sg_nents);
set_dma_mode(ec->dma, dma_mode);
drive->waiting_for_dma = 1;
return 0;
}
static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd)
{
/* issue cmd to drive */
ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD, NULL);
}
static int icside_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct expansion_card *ec = ECARD_DEV(hwif->dev);
struct icside_state *state = ecard_get_drvdata(ec);
return readb(state->irq_port +
(hwif->channel ?
ICS_ARCIN_V6_INTRSTAT_2 :
ICS_ARCIN_V6_INTRSTAT_1)) & 1;
}
static void icside_dma_timeout(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
if (icside_dma_test_irq(drive))
return;
ide_dump_status(drive, "DMA timeout", hwif->tp_ops->read_status(hwif));
icside_dma_end(drive);
}
static void icside_dma_lost_irq(ide_drive_t *drive)
{
printk(KERN_ERR "%s: IRQ lost\n", drive->name);
}
static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
{
hwif->dmatable_cpu = NULL;
hwif->dmatable_dma = 0;
return 0;
}
static const struct ide_dma_ops icside_v6_dma_ops = {
.dma_host_set = icside_dma_host_set,
.dma_setup = icside_dma_setup,
.dma_exec_cmd = icside_dma_exec_cmd,
.dma_start = icside_dma_start,
.dma_end = icside_dma_end,
.dma_test_irq = icside_dma_test_irq,
.dma_timeout = icside_dma_timeout,
.dma_lost_irq = icside_dma_lost_irq,
};
#else
#define icside_v6_dma_ops NULL
#endif
static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
{
return -EOPNOTSUPP;
}
static void icside_setup_ports(hw_regs_t *hw, void __iomem *base,
struct cardinfo *info, struct expansion_card *ec)
{
unsigned long port = (unsigned long)base + info->dataoffset;
hw->io_ports.data_addr = port;
hw->io_ports.error_addr = port + (1 << info->stepping);
hw->io_ports.nsect_addr = port + (2 << info->stepping);
hw->io_ports.lbal_addr = port + (3 << info->stepping);
hw->io_ports.lbam_addr = port + (4 << info->stepping);
hw->io_ports.lbah_addr = port + (5 << info->stepping);
hw->io_ports.device_addr = port + (6 << info->stepping);
hw->io_ports.status_addr = port + (7 << info->stepping);
hw->io_ports.ctl_addr = (unsigned long)base + info->ctrloffset;
hw->irq = ec->irq;
hw->dev = &ec->dev;
hw->chipset = ide_acorn;
}
static int __init
icside_register_v5(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *base;
struct ide_host *host;
hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0);
if (!base)
return -ENOMEM;
state->irq_port = base;
ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
ec->irqmask = 1;
ecard_setirq(ec, &icside_ops_arcin_v5, state);
/*
* Be on the safe side - disable interrupts
*/
icside_irqdisable_arcin_v5(ec, 0);
icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec);
host = ide_host_alloc(NULL, hws);
if (host == NULL)
return -ENODEV;
state->host = host;
ecard_set_drvdata(ec, state);
ide_host_register(host, NULL, hws);
return 0;
}
static const struct ide_port_info icside_v6_port_info __initdata = {
.init_dma = icside_dma_off_init,
.port_ops = &icside_v6_no_dma_port_ops,
.dma_ops = &icside_v6_dma_ops,
.host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
.mwdma_mask = ATA_MWDMA2,
.swdma_mask = ATA_SWDMA2,
};
static int __init
icside_register_v6(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *ioc_base, *easi_base;
struct ide_host *host;
unsigned int sel = 0;
int ret;
hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL };
struct ide_port_info d = icside_v6_port_info;
ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (!ioc_base) {
ret = -ENOMEM;
goto out;
}
easi_base = ioc_base;
if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
easi_base = ecardm_iomap(ec, ECARD_RES_EASI, 0, 0);
if (!easi_base) {
ret = -ENOMEM;
goto out;
}
/*
* Enable access to the EASI region.
*/
sel = 1 << 5;
}
writeb(sel, ioc_base);
ecard_setirq(ec, &icside_ops_arcin_v6, state);
state->irq_port = easi_base;
state->ioc_base = ioc_base;
state->sel = sel;
/*
* Be on the safe side - disable interrupts
*/
icside_irqdisable_arcin_v6(ec, 0);
icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec);
icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec);
host = ide_host_alloc(&d, hws);
if (host == NULL)
return -ENODEV;
state->host = host;
ecard_set_drvdata(ec, state);
if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
d.init_dma = icside_dma_init;
d.port_ops = &icside_v6_port_ops;
d.dma_ops = NULL;
}
ide_host_register(host, &d, hws);
return 0;
out:
return ret;
}
static int __devinit
icside_probe(struct expansion_card *ec, const struct ecard_id *id)
{
struct icside_state *state;
void __iomem *idmem;
int ret;
ret = ecard_request_resources(ec);
if (ret)
goto out;
state = kzalloc(sizeof(struct icside_state), GFP_KERNEL);
if (!state) {
ret = -ENOMEM;
goto release;
}
state->type = ICS_TYPE_NOTYPE;
idmem = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
if (idmem) {
unsigned int type;
type = readb(idmem + ICS_IDENT_OFFSET) & 1;
type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
ecardm_iounmap(ec, idmem);
state->type = type;
}
switch (state->type) {
case ICS_TYPE_A3IN:
dev_warn(&ec->dev, "A3IN unsupported\n");
ret = -ENODEV;
break;
case ICS_TYPE_A3USER:
dev_warn(&ec->dev, "A3USER unsupported\n");
ret = -ENODEV;
break;
case ICS_TYPE_V5:
ret = icside_register_v5(state, ec);
break;
case ICS_TYPE_V6:
ret = icside_register_v6(state, ec);
break;
default:
dev_warn(&ec->dev, "unknown interface type\n");
ret = -ENODEV;
break;
}
if (ret == 0)
goto out;
kfree(state);
release:
ecard_release_resources(ec);
out:
return ret;
}
static void __devexit icside_remove(struct expansion_card *ec)
{
struct icside_state *state = ecard_get_drvdata(ec);
switch (state->type) {
case ICS_TYPE_V5:
/* FIXME: tell IDE to stop using the interface */
/* Disable interrupts */
icside_irqdisable_arcin_v5(ec, 0);
break;
case ICS_TYPE_V6:
/* FIXME: tell IDE to stop using the interface */
if (ec->dma != NO_DMA)
free_dma(ec->dma);
/* Disable interrupts */
icside_irqdisable_arcin_v6(ec, 0);
/* Reset the ROM pointer/EASI selection */
writeb(0, state->ioc_base);
break;
}
ecard_set_drvdata(ec, NULL);
kfree(state);
ecard_release_resources(ec);
}
static void icside_shutdown(struct expansion_card *ec)
{
struct icside_state *state = ecard_get_drvdata(ec);
unsigned long flags;
/*
* Disable interrupts from this card. We need to do
* this before disabling EASI since we may be accessing
* this register via that region.
*/
local_irq_save(flags);
ec->ops->irqdisable(ec, 0);
local_irq_restore(flags);
/*
* Reset the ROM pointer so that we can read the ROM
* after a soft reboot. This also disables access to
* the IDE taskfile via the EASI region.
*/
if (state->ioc_base)
writeb(0, state->ioc_base);
}
static const struct ecard_id icside_ids[] = {
{ MANU_ICS, PROD_ICS_IDE },
{ MANU_ICS2, PROD_ICS2_IDE },
{ 0xffff, 0xffff }
};
static struct ecard_driver icside_driver = {
.probe = icside_probe,
.remove = __devexit_p(icside_remove),
.shutdown = icside_shutdown,
.id_table = icside_ids,
.drv = {
.name = "icside",
},
};
static int __init icside_init(void)
{
return ecard_register_driver(&icside_driver);
}
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ICS IDE driver");
module_init(icside_init);