| /* |
| * Allwinner sun4i USB phy driver |
| * |
| * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com> |
| * |
| * Based on code from |
| * Allwinner Technology Co., Ltd. <www.allwinnertech.com> |
| * |
| * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver |
| * Copyright (C) 2013 Samsung Electronics Co., Ltd. |
| * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/reset.h> |
| |
| #define REG_ISCR 0x00 |
| #define REG_PHYCTL 0x04 |
| #define REG_PHYBIST 0x08 |
| #define REG_PHYTUNE 0x0c |
| |
| #define PHYCTL_DATA BIT(7) |
| |
| #define SUNXI_AHB_ICHR8_EN BIT(10) |
| #define SUNXI_AHB_INCR4_BURST_EN BIT(9) |
| #define SUNXI_AHB_INCRX_ALIGN_EN BIT(8) |
| #define SUNXI_ULPI_BYPASS_EN BIT(0) |
| |
| /* Common Control Bits for Both PHYs */ |
| #define PHY_PLL_BW 0x03 |
| #define PHY_RES45_CAL_EN 0x0c |
| |
| /* Private Control Bits for Each PHY */ |
| #define PHY_TX_AMPLITUDE_TUNE 0x20 |
| #define PHY_TX_SLEWRATE_TUNE 0x22 |
| #define PHY_VBUSVALID_TH_SEL 0x25 |
| #define PHY_PULLUP_RES_SEL 0x27 |
| #define PHY_OTG_FUNC_EN 0x28 |
| #define PHY_VBUS_DET_EN 0x29 |
| #define PHY_DISCON_TH_SEL 0x2a |
| |
| #define MAX_PHYS 3 |
| |
| struct sun4i_usb_phy_data { |
| void __iomem *base; |
| struct mutex mutex; |
| int num_phys; |
| u32 disc_thresh; |
| struct sun4i_usb_phy { |
| struct phy *phy; |
| void __iomem *pmu; |
| struct regulator *vbus; |
| struct reset_control *reset; |
| struct clk *clk; |
| int index; |
| } phys[MAX_PHYS]; |
| }; |
| |
| #define to_sun4i_usb_phy_data(phy) \ |
| container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index]) |
| |
| static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, |
| int len) |
| { |
| struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); |
| u32 temp, usbc_bit = BIT(phy->index * 2); |
| int i; |
| |
| mutex_lock(&phy_data->mutex); |
| |
| for (i = 0; i < len; i++) { |
| temp = readl(phy_data->base + REG_PHYCTL); |
| |
| /* clear the address portion */ |
| temp &= ~(0xff << 8); |
| |
| /* set the address */ |
| temp |= ((addr + i) << 8); |
| writel(temp, phy_data->base + REG_PHYCTL); |
| |
| /* set the data bit and clear usbc bit*/ |
| temp = readb(phy_data->base + REG_PHYCTL); |
| if (data & 0x1) |
| temp |= PHYCTL_DATA; |
| else |
| temp &= ~PHYCTL_DATA; |
| temp &= ~usbc_bit; |
| writeb(temp, phy_data->base + REG_PHYCTL); |
| |
| /* pulse usbc_bit */ |
| temp = readb(phy_data->base + REG_PHYCTL); |
| temp |= usbc_bit; |
| writeb(temp, phy_data->base + REG_PHYCTL); |
| |
| temp = readb(phy_data->base + REG_PHYCTL); |
| temp &= ~usbc_bit; |
| writeb(temp, phy_data->base + REG_PHYCTL); |
| |
| data >>= 1; |
| } |
| mutex_unlock(&phy_data->mutex); |
| } |
| |
| static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable) |
| { |
| u32 bits, reg_value; |
| |
| if (!phy->pmu) |
| return; |
| |
| bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN | |
| SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; |
| |
| reg_value = readl(phy->pmu); |
| |
| if (enable) |
| reg_value |= bits; |
| else |
| reg_value &= ~bits; |
| |
| writel(reg_value, phy->pmu); |
| } |
| |
| static int sun4i_usb_phy_init(struct phy *_phy) |
| { |
| struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); |
| struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); |
| int ret; |
| |
| ret = clk_prepare_enable(phy->clk); |
| if (ret) |
| return ret; |
| |
| ret = reset_control_deassert(phy->reset); |
| if (ret) { |
| clk_disable_unprepare(phy->clk); |
| return ret; |
| } |
| |
| /* Adjust PHY's magnitude and rate */ |
| sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); |
| |
| /* Disconnect threshold adjustment */ |
| sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2); |
| |
| sun4i_usb_phy_passby(phy, 1); |
| |
| return 0; |
| } |
| |
| static int sun4i_usb_phy_exit(struct phy *_phy) |
| { |
| struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); |
| |
| sun4i_usb_phy_passby(phy, 0); |
| reset_control_assert(phy->reset); |
| clk_disable_unprepare(phy->clk); |
| |
| return 0; |
| } |
| |
| static int sun4i_usb_phy_power_on(struct phy *_phy) |
| { |
| struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); |
| int ret = 0; |
| |
| if (phy->vbus) |
| ret = regulator_enable(phy->vbus); |
| |
| return ret; |
| } |
| |
| static int sun4i_usb_phy_power_off(struct phy *_phy) |
| { |
| struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); |
| |
| if (phy->vbus) |
| regulator_disable(phy->vbus); |
| |
| return 0; |
| } |
| |
| static struct phy_ops sun4i_usb_phy_ops = { |
| .init = sun4i_usb_phy_init, |
| .exit = sun4i_usb_phy_exit, |
| .power_on = sun4i_usb_phy_power_on, |
| .power_off = sun4i_usb_phy_power_off, |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct phy *sun4i_usb_phy_xlate(struct device *dev, |
| struct of_phandle_args *args) |
| { |
| struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); |
| |
| if (WARN_ON(args->args[0] == 0 || args->args[0] >= data->num_phys)) |
| return ERR_PTR(-ENODEV); |
| |
| return data->phys[args->args[0]].phy; |
| } |
| |
| static int sun4i_usb_phy_probe(struct platform_device *pdev) |
| { |
| struct sun4i_usb_phy_data *data; |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct phy_provider *phy_provider; |
| bool dedicated_clocks; |
| struct resource *res; |
| int i; |
| |
| data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| mutex_init(&data->mutex); |
| |
| if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy")) |
| data->num_phys = 2; |
| else |
| data->num_phys = 3; |
| |
| if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy")) |
| data->disc_thresh = 3; |
| else |
| data->disc_thresh = 2; |
| |
| if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy")) |
| dedicated_clocks = true; |
| else |
| dedicated_clocks = false; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl"); |
| data->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(data->base)) |
| return PTR_ERR(data->base); |
| |
| /* Skip 0, 0 is the phy for otg which is not yet supported. */ |
| for (i = 1; i < data->num_phys; i++) { |
| struct sun4i_usb_phy *phy = data->phys + i; |
| char name[16]; |
| |
| snprintf(name, sizeof(name), "usb%d_vbus", i); |
| phy->vbus = devm_regulator_get_optional(dev, name); |
| if (IS_ERR(phy->vbus)) { |
| if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| phy->vbus = NULL; |
| } |
| |
| if (dedicated_clocks) |
| snprintf(name, sizeof(name), "usb%d_phy", i); |
| else |
| strlcpy(name, "usb_phy", sizeof(name)); |
| |
| phy->clk = devm_clk_get(dev, name); |
| if (IS_ERR(phy->clk)) { |
| dev_err(dev, "failed to get clock %s\n", name); |
| return PTR_ERR(phy->clk); |
| } |
| |
| snprintf(name, sizeof(name), "usb%d_reset", i); |
| phy->reset = devm_reset_control_get(dev, name); |
| if (IS_ERR(phy->reset)) { |
| dev_err(dev, "failed to get reset %s\n", name); |
| return PTR_ERR(phy->reset); |
| } |
| |
| if (i) { /* No pmu for usbc0 */ |
| snprintf(name, sizeof(name), "pmu%d", i); |
| res = platform_get_resource_byname(pdev, |
| IORESOURCE_MEM, name); |
| phy->pmu = devm_ioremap_resource(dev, res); |
| if (IS_ERR(phy->pmu)) |
| return PTR_ERR(phy->pmu); |
| } |
| |
| phy->phy = devm_phy_create(dev, &sun4i_usb_phy_ops, NULL); |
| if (IS_ERR(phy->phy)) { |
| dev_err(dev, "failed to create PHY %d\n", i); |
| return PTR_ERR(phy->phy); |
| } |
| |
| phy->index = i; |
| phy_set_drvdata(phy->phy, &data->phys[i]); |
| } |
| |
| dev_set_drvdata(dev, data); |
| phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate); |
| if (IS_ERR(phy_provider)) |
| return PTR_ERR(phy_provider); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id sun4i_usb_phy_of_match[] = { |
| { .compatible = "allwinner,sun4i-a10-usb-phy" }, |
| { .compatible = "allwinner,sun5i-a13-usb-phy" }, |
| { .compatible = "allwinner,sun6i-a31-usb-phy" }, |
| { .compatible = "allwinner,sun7i-a20-usb-phy" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); |
| |
| static struct platform_driver sun4i_usb_phy_driver = { |
| .probe = sun4i_usb_phy_probe, |
| .driver = { |
| .of_match_table = sun4i_usb_phy_of_match, |
| .name = "sun4i-usb-phy", |
| .owner = THIS_MODULE, |
| } |
| }; |
| module_platform_driver(sun4i_usb_phy_driver); |
| |
| MODULE_DESCRIPTION("Allwinner sun4i USB phy driver"); |
| MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); |
| MODULE_LICENSE("GPL v2"); |