| /* |
| * arizona-ldo1.c -- LDO1 supply for Arizona devices |
| * |
| * Copyright 2012 Wolfson Microelectronics PLC. |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| |
| #include <linux/mfd/arizona/core.h> |
| #include <linux/mfd/arizona/pdata.h> |
| #include <linux/mfd/arizona/registers.h> |
| |
| struct arizona_ldo1 { |
| struct regulator_dev *regulator; |
| struct arizona *arizona; |
| |
| struct regulator_consumer_supply supply; |
| struct regulator_init_data init_data; |
| }; |
| |
| static struct regulator_ops arizona_ldo1_ops = { |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| }; |
| |
| static const struct regulator_desc arizona_ldo1 = { |
| .name = "LDO1", |
| .supply_name = "LDOVDD", |
| .type = REGULATOR_VOLTAGE, |
| .ops = &arizona_ldo1_ops, |
| |
| .vsel_reg = ARIZONA_LDO1_CONTROL_1, |
| .vsel_mask = ARIZONA_LDO1_VSEL_MASK, |
| .min_uV = 900000, |
| .uV_step = 50000, |
| .n_voltages = 7, |
| |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct regulator_init_data arizona_ldo1_default = { |
| .constraints = { |
| .valid_ops_mask = REGULATOR_CHANGE_STATUS, |
| }, |
| .num_consumer_supplies = 1, |
| }; |
| |
| static __devinit int arizona_ldo1_probe(struct platform_device *pdev) |
| { |
| struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); |
| struct regulator_config config = { }; |
| struct arizona_ldo1 *ldo1; |
| int ret; |
| |
| ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL); |
| if (ldo1 == NULL) { |
| dev_err(&pdev->dev, "Unable to allocate private data\n"); |
| return -ENOMEM; |
| } |
| |
| ldo1->arizona = arizona; |
| |
| /* |
| * Since the chip usually supplies itself we provide some |
| * default init_data for it. This will be overridden with |
| * platform data if provided. |
| */ |
| ldo1->init_data = arizona_ldo1_default; |
| ldo1->init_data.consumer_supplies = &ldo1->supply; |
| ldo1->supply.supply = "DCVDD"; |
| ldo1->supply.dev_name = dev_name(arizona->dev); |
| |
| config.dev = arizona->dev; |
| config.driver_data = ldo1; |
| config.regmap = arizona->regmap; |
| config.ena_gpio = arizona->pdata.ldoena; |
| |
| if (arizona->pdata.ldo1) |
| config.init_data = arizona->pdata.ldo1; |
| else |
| config.init_data = &ldo1->init_data; |
| |
| ldo1->regulator = regulator_register(&arizona_ldo1, &config); |
| if (IS_ERR(ldo1->regulator)) { |
| ret = PTR_ERR(ldo1->regulator); |
| dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n", |
| ret); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, ldo1); |
| |
| return 0; |
| } |
| |
| static __devexit int arizona_ldo1_remove(struct platform_device *pdev) |
| { |
| struct arizona_ldo1 *ldo1 = platform_get_drvdata(pdev); |
| |
| regulator_unregister(ldo1->regulator); |
| |
| return 0; |
| } |
| |
| static struct platform_driver arizona_ldo1_driver = { |
| .probe = arizona_ldo1_probe, |
| .remove = __devexit_p(arizona_ldo1_remove), |
| .driver = { |
| .name = "arizona-ldo1", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| module_platform_driver(arizona_ldo1_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_DESCRIPTION("Arizona LDO1 driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:arizona-ldo1"); |