| /* |
| * include/asm-arm/arch-s3c2410/entry-macro.S |
| * |
| * Low-level IRQ helper macros for S3C2410-based platforms |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| |
| * Modifications: |
| * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA |
| */ |
| #include <asm/hardware.h> |
| #include <asm/arch/irqs.h> |
| |
| |
| .macro get_irqnr_and_base, irqnr, irqstat, base, tmp |
| |
| mov \tmp, #S3C24XX_VA_IRQ |
| ldr \irqnr, [ \tmp, #0x14 ] @ get irq no |
| 30000: |
| teq \irqnr, #4 |
| teqne \irqnr, #5 |
| beq 1002f @ external irq reg |
| |
| @ debug check to see if interrupt reported is the same |
| @ as the offset.... |
| |
| teq \irqnr, #0 |
| beq 20002f |
| ldr \irqstat, [ \tmp, #0x10 ] @ INTPND |
| mov \irqstat, \irqstat, lsr \irqnr |
| tst \irqstat, #1 |
| bne 20002f |
| |
| /* debug/warning if we get an invalud response from the |
| * INTOFFSET register */ |
| #if 1 |
| stmfd r13!, { r0 - r4 , r8-r12, r14 } |
| ldr r1, [ \tmp, #0x14 ] @ INTOFFSET |
| ldr r2, [ \tmp, #0x10 ] @ INTPND |
| ldr r3, [ \tmp, #0x00 ] @ SRCPND |
| adr r0, 20003f |
| bl printk |
| b 20004f |
| |
| 20003: |
| .ascii "<7>irq: err - bad offset %d, intpnd=%08x, srcpnd=%08x\n" |
| .byte 0 |
| .align 4 |
| 20004: |
| mov r1, #1 |
| mov \tmp, #S3C24XX_VA_IRQ |
| ldmfd r13!, { r0 - r4 , r8-r12, r14 } |
| #endif |
| |
| @ try working out interrupt number for ourselves |
| mov \irqnr, #0 |
| ldr \irqstat, [ \tmp, #0x10 ] @ INTPND |
| 10021: |
| movs \irqstat, \irqstat, lsr#1 |
| bcs 30000b @ try and re-start the proccess |
| add \irqnr, \irqnr, #1 |
| cmp \irqnr, #32 |
| ble 10021b |
| |
| @ found no interrupt, set Z flag and leave |
| movs \irqnr, #0 |
| b 1001f |
| |
| 20005: |
| 20002: @ exit |
| @ we base the s3c2410x interrupts at 16 and above to allow |
| @ isa peripherals to have their standard interrupts, also |
| @ ensure that Z flag is un-set on exit |
| |
| @ note, we cannot be sure if we get IRQ_EINT0 (0) that |
| @ there is simply no interrupt pending, so in all other |
| @ cases we jump to say we have found something, otherwise |
| @ we check to see if the interrupt really is assrted |
| adds \irqnr, \irqnr, #IRQ_EINT0 |
| teq \irqnr, #IRQ_EINT0 |
| bne 1001f @ exit |
| ldr \irqstat, [ \tmp, #0x10 ] @ INTPND |
| teq \irqstat, #0 |
| moveq \irqnr, #0 |
| b 1001f |
| |
| @ we get here from no main or external interrupts pending |
| 1002: |
| add \tmp, \tmp, #S3C24XX_VA_GPIO - S3C24XX_VA_IRQ |
| ldr \irqstat, [ \tmp, # 0xa8 ] @ EXTINTPEND |
| ldr \irqnr, [ \tmp, # 0xa4 ] @ EXTINTMASK |
| |
| bic \irqstat, \irqstat, \irqnr @ clear masked irqs |
| |
| mov \irqnr, #IRQ_EINT4 @ start extint nos |
| mov \irqstat, \irqstat, lsr#4 @ ignore bottom 4 bits |
| 10021: |
| movs \irqstat, \irqstat, lsr#1 |
| bcs 1004f |
| add \irqnr, \irqnr, #1 |
| cmp \irqnr, #IRQ_EINT23 |
| ble 10021b |
| |
| @ found no interrupt, set Z flag and leave |
| movs \irqnr, #0 |
| |
| 1004: @ ensure Z flag clear in case our MOVS shifted out the last bit |
| teq \irqnr, #0 |
| 1001: |
| @ exit irq routine |
| .endm |
| |
| |
| /* currently don't need an disable_fiq macro */ |
| |
| .macro disable_fiq |
| .endm |
| |
| |