| /* |
| * Copyright (C) 2013 Emilio López <emilio@elopez.com.ar> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Adjustable factor-based clock implementation |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/string.h> |
| |
| #include <linux/delay.h> |
| |
| #include "clk-factors.h" |
| |
| /* |
| * DOC: basic adjustable factor-based clock that cannot gate |
| * |
| * Traits of this clock: |
| * prepare - clk_prepare only ensures that parents are prepared |
| * enable - clk_enable only ensures that parents are enabled |
| * rate - rate is adjustable. |
| * clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1) |
| * parent - fixed parent. No clk_set_parent support |
| */ |
| |
| #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) |
| |
| #define SETMASK(len, pos) (((1U << (len)) - 1) << (pos)) |
| #define CLRMASK(len, pos) (~(SETMASK(len, pos))) |
| #define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit)) |
| |
| #define FACTOR_SET(bit, len, reg, val) \ |
| (((reg) & CLRMASK(len, bit)) | (val << (bit))) |
| |
| static unsigned long clk_factors_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| u8 n = 1, k = 0, p = 0, m = 0; |
| u32 reg; |
| unsigned long rate; |
| struct clk_factors *factors = to_clk_factors(hw); |
| struct clk_factors_config *config = factors->config; |
| |
| /* Fetch the register value */ |
| reg = readl(factors->reg); |
| |
| /* Get each individual factor if applicable */ |
| if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE) |
| n = FACTOR_GET(config->nshift, config->nwidth, reg); |
| if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE) |
| k = FACTOR_GET(config->kshift, config->kwidth, reg); |
| if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE) |
| m = FACTOR_GET(config->mshift, config->mwidth, reg); |
| if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE) |
| p = FACTOR_GET(config->pshift, config->pwidth, reg); |
| |
| /* Calculate the rate */ |
| rate = (parent_rate * (n + config->n_start) * (k + 1) >> p) / (m + 1); |
| |
| return rate; |
| } |
| |
| static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct clk_factors *factors = to_clk_factors(hw); |
| factors->get_factors((u32 *)&rate, (u32)*parent_rate, |
| NULL, NULL, NULL, NULL); |
| |
| return rate; |
| } |
| |
| static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *best_parent_rate, |
| struct clk **best_parent_p) |
| { |
| struct clk *clk = hw->clk, *parent, *best_parent = NULL; |
| int i, num_parents; |
| unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0; |
| |
| /* find the parent that can help provide the fastest rate <= rate */ |
| num_parents = __clk_get_num_parents(clk); |
| for (i = 0; i < num_parents; i++) { |
| parent = clk_get_parent_by_index(clk, i); |
| if (!parent) |
| continue; |
| if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT) |
| parent_rate = __clk_round_rate(parent, rate); |
| else |
| parent_rate = __clk_get_rate(parent); |
| |
| child_rate = clk_factors_round_rate(hw, rate, &parent_rate); |
| |
| if (child_rate <= rate && child_rate > best_child_rate) { |
| best_parent = parent; |
| best = parent_rate; |
| best_child_rate = child_rate; |
| } |
| } |
| |
| if (best_parent) |
| *best_parent_p = best_parent; |
| *best_parent_rate = best; |
| |
| return best_child_rate; |
| } |
| |
| static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| u8 n = 0, k = 0, m = 0, p = 0; |
| u32 reg; |
| struct clk_factors *factors = to_clk_factors(hw); |
| struct clk_factors_config *config = factors->config; |
| unsigned long flags = 0; |
| |
| factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p); |
| |
| if (factors->lock) |
| spin_lock_irqsave(factors->lock, flags); |
| |
| /* Fetch the register value */ |
| reg = readl(factors->reg); |
| |
| /* Set up the new factors - macros do not do anything if width is 0 */ |
| reg = FACTOR_SET(config->nshift, config->nwidth, reg, n); |
| reg = FACTOR_SET(config->kshift, config->kwidth, reg, k); |
| reg = FACTOR_SET(config->mshift, config->mwidth, reg, m); |
| reg = FACTOR_SET(config->pshift, config->pwidth, reg, p); |
| |
| /* Apply them now */ |
| writel(reg, factors->reg); |
| |
| /* delay 500us so pll stabilizes */ |
| __delay((rate >> 20) * 500 / 2); |
| |
| if (factors->lock) |
| spin_unlock_irqrestore(factors->lock, flags); |
| |
| return 0; |
| } |
| |
| const struct clk_ops clk_factors_ops = { |
| .determine_rate = clk_factors_determine_rate, |
| .recalc_rate = clk_factors_recalc_rate, |
| .round_rate = clk_factors_round_rate, |
| .set_rate = clk_factors_set_rate, |
| }; |