| /* |
| * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. |
| * |
| * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) |
| * |
| * Based on the dvb-usb-framework code and the |
| * original Terratec Cinergy T2 driver by: |
| * |
| * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and |
| * Holger Waechtler <holger@qanu.de> |
| * |
| * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| */ |
| |
| #include "cinergyT2.h" |
| |
| |
| /** |
| * convert linux-dvb frontend parameter set into TPS. |
| * See ETSI ETS-300744, section 4.6.2, table 9 for details. |
| * |
| * This function is probably reusable and may better get placed in a support |
| * library. |
| * |
| * We replace errornous fields by default TPS fields (the ones with value 0). |
| */ |
| |
| static uint16_t compute_tps(struct dtv_frontend_properties *op) |
| { |
| uint16_t tps = 0; |
| |
| switch (op->code_rate_HP) { |
| case FEC_2_3: |
| tps |= (1 << 7); |
| break; |
| case FEC_3_4: |
| tps |= (2 << 7); |
| break; |
| case FEC_5_6: |
| tps |= (3 << 7); |
| break; |
| case FEC_7_8: |
| tps |= (4 << 7); |
| break; |
| case FEC_1_2: |
| case FEC_AUTO: |
| default: |
| /* tps |= (0 << 7) */; |
| } |
| |
| switch (op->code_rate_LP) { |
| case FEC_2_3: |
| tps |= (1 << 4); |
| break; |
| case FEC_3_4: |
| tps |= (2 << 4); |
| break; |
| case FEC_5_6: |
| tps |= (3 << 4); |
| break; |
| case FEC_7_8: |
| tps |= (4 << 4); |
| break; |
| case FEC_1_2: |
| case FEC_AUTO: |
| default: |
| /* tps |= (0 << 4) */; |
| } |
| |
| switch (op->modulation) { |
| case QAM_16: |
| tps |= (1 << 13); |
| break; |
| case QAM_64: |
| tps |= (2 << 13); |
| break; |
| case QPSK: |
| default: |
| /* tps |= (0 << 13) */; |
| } |
| |
| switch (op->transmission_mode) { |
| case TRANSMISSION_MODE_8K: |
| tps |= (1 << 0); |
| break; |
| case TRANSMISSION_MODE_2K: |
| default: |
| /* tps |= (0 << 0) */; |
| } |
| |
| switch (op->guard_interval) { |
| case GUARD_INTERVAL_1_16: |
| tps |= (1 << 2); |
| break; |
| case GUARD_INTERVAL_1_8: |
| tps |= (2 << 2); |
| break; |
| case GUARD_INTERVAL_1_4: |
| tps |= (3 << 2); |
| break; |
| case GUARD_INTERVAL_1_32: |
| default: |
| /* tps |= (0 << 2) */; |
| } |
| |
| switch (op->hierarchy) { |
| case HIERARCHY_1: |
| tps |= (1 << 10); |
| break; |
| case HIERARCHY_2: |
| tps |= (2 << 10); |
| break; |
| case HIERARCHY_4: |
| tps |= (3 << 10); |
| break; |
| case HIERARCHY_NONE: |
| default: |
| /* tps |= (0 << 10) */; |
| } |
| |
| return tps; |
| } |
| |
| struct cinergyt2_fe_state { |
| struct dvb_frontend fe; |
| struct dvb_usb_device *d; |
| }; |
| |
| static int cinergyt2_fe_read_status(struct dvb_frontend *fe, |
| fe_status_t *status) |
| { |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; |
| struct dvbt_get_status_msg result; |
| u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; |
| int ret; |
| |
| ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result, |
| sizeof(result), 0); |
| if (ret < 0) |
| return ret; |
| |
| *status = 0; |
| |
| if (0xffff - le16_to_cpu(result.gain) > 30) |
| *status |= FE_HAS_SIGNAL; |
| if (result.lock_bits & (1 << 6)) |
| *status |= FE_HAS_LOCK; |
| if (result.lock_bits & (1 << 5)) |
| *status |= FE_HAS_SYNC; |
| if (result.lock_bits & (1 << 4)) |
| *status |= FE_HAS_CARRIER; |
| if (result.lock_bits & (1 << 1)) |
| *status |= FE_HAS_VITERBI; |
| |
| if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != |
| (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) |
| *status &= ~FE_HAS_LOCK; |
| |
| return 0; |
| } |
| |
| static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; |
| struct dvbt_get_status_msg status; |
| char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; |
| int ret; |
| |
| ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, |
| sizeof(status), 0); |
| if (ret < 0) |
| return ret; |
| |
| *ber = le32_to_cpu(status.viterbi_error_rate); |
| return 0; |
| } |
| |
| static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) |
| { |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; |
| struct dvbt_get_status_msg status; |
| u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; |
| int ret; |
| |
| ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status, |
| sizeof(status), 0); |
| if (ret < 0) { |
| err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n", |
| ret); |
| return ret; |
| } |
| *unc = le32_to_cpu(status.uncorrected_block_count); |
| return 0; |
| } |
| |
| static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe, |
| u16 *strength) |
| { |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; |
| struct dvbt_get_status_msg status; |
| char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; |
| int ret; |
| |
| ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, |
| sizeof(status), 0); |
| if (ret < 0) { |
| err("cinergyt2_fe_read_signal_strength() Failed!" |
| " (Error=%d)\n", ret); |
| return ret; |
| } |
| *strength = (0xffff - le16_to_cpu(status.gain)); |
| return 0; |
| } |
| |
| static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; |
| struct dvbt_get_status_msg status; |
| char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; |
| int ret; |
| |
| ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, |
| sizeof(status), 0); |
| if (ret < 0) { |
| err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret); |
| return ret; |
| } |
| *snr = (status.snr << 8) | status.snr; |
| return 0; |
| } |
| |
| static int cinergyt2_fe_init(struct dvb_frontend *fe) |
| { |
| return 0; |
| } |
| |
| static int cinergyt2_fe_sleep(struct dvb_frontend *fe) |
| { |
| deb_info("cinergyt2_fe_sleep() Called\n"); |
| return 0; |
| } |
| |
| static int cinergyt2_fe_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *tune) |
| { |
| tune->min_delay_ms = 800; |
| return 0; |
| } |
| |
| static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *fep = &fe->dtv_property_cache; |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; |
| struct dvbt_set_parameters_msg param; |
| char result[2]; |
| int err; |
| |
| param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; |
| param.tps = cpu_to_le16(compute_tps(fep)); |
| param.freq = cpu_to_le32(fep->frequency / 1000); |
| param.flags = 0; |
| |
| switch (fep->bandwidth_hz) { |
| case 8000000: |
| param.bandwidth = 0; |
| break; |
| case 7000000: |
| param.bandwidth = 1; |
| break; |
| case 6000000: |
| param.bandwidth = 2; |
| break; |
| } |
| |
| err = dvb_usb_generic_rw(state->d, |
| (char *)¶m, sizeof(param), |
| result, sizeof(result), 0); |
| if (err < 0) |
| err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err); |
| |
| return (err < 0) ? err : 0; |
| } |
| |
| static void cinergyt2_fe_release(struct dvb_frontend *fe) |
| { |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; |
| if (state != NULL) |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops cinergyt2_fe_ops; |
| |
| struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d) |
| { |
| struct cinergyt2_fe_state *s = kzalloc(sizeof( |
| struct cinergyt2_fe_state), GFP_KERNEL); |
| if (s == NULL) |
| return NULL; |
| |
| s->d = d; |
| memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops)); |
| s->fe.demodulator_priv = s; |
| return &s->fe; |
| } |
| |
| |
| static struct dvb_frontend_ops cinergyt2_fe_ops = { |
| .delsys = { SYS_DVBT }, |
| .info = { |
| .name = DRIVER_NAME, |
| .frequency_min = 174000000, |
| .frequency_max = 862000000, |
| .frequency_stepsize = 166667, |
| .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2 |
| | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
| | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
| | FE_CAN_FEC_AUTO | FE_CAN_QPSK |
| | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
| | FE_CAN_QAM_AUTO |
| | FE_CAN_TRANSMISSION_MODE_AUTO |
| | FE_CAN_GUARD_INTERVAL_AUTO |
| | FE_CAN_HIERARCHY_AUTO |
| | FE_CAN_RECOVER |
| | FE_CAN_MUTE_TS |
| }, |
| |
| .release = cinergyt2_fe_release, |
| |
| .init = cinergyt2_fe_init, |
| .sleep = cinergyt2_fe_sleep, |
| |
| .set_frontend = cinergyt2_fe_set_frontend, |
| .get_tune_settings = cinergyt2_fe_get_tune_settings, |
| |
| .read_status = cinergyt2_fe_read_status, |
| .read_ber = cinergyt2_fe_read_ber, |
| .read_signal_strength = cinergyt2_fe_read_signal_strength, |
| .read_snr = cinergyt2_fe_read_snr, |
| .read_ucblocks = cinergyt2_fe_read_unc_blocks, |
| }; |