| /* |
| * Copyright (C) 2015, 2016 ARM Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include <linux/irqchip/arm-gic.h> |
| #include <linux/kvm.h> |
| #include <linux/kvm_host.h> |
| #include <kvm/arm_vgic.h> |
| #include <asm/kvm_mmu.h> |
| |
| #include "vgic.h" |
| |
| /* |
| * Call this function to convert a u64 value to an unsigned long * bitmask |
| * in a way that works on both 32-bit and 64-bit LE and BE platforms. |
| * |
| * Warning: Calling this function may modify *val. |
| */ |
| static unsigned long *u64_to_bitmask(u64 *val) |
| { |
| #if defined(CONFIG_CPU_BIG_ENDIAN) && BITS_PER_LONG == 32 |
| *val = (*val >> 32) | (*val << 32); |
| #endif |
| return (unsigned long *)val; |
| } |
| |
| void vgic_v2_process_maintenance(struct kvm_vcpu *vcpu) |
| { |
| struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2; |
| |
| if (cpuif->vgic_misr & GICH_MISR_EOI) { |
| u64 eisr = cpuif->vgic_eisr; |
| unsigned long *eisr_bmap = u64_to_bitmask(&eisr); |
| int lr; |
| |
| for_each_set_bit(lr, eisr_bmap, kvm_vgic_global_state.nr_lr) { |
| u32 intid = cpuif->vgic_lr[lr] & GICH_LR_VIRTUALID; |
| |
| WARN_ON(cpuif->vgic_lr[lr] & GICH_LR_STATE); |
| |
| /* Only SPIs require notification */ |
| if (vgic_valid_spi(vcpu->kvm, intid)) |
| kvm_notify_acked_irq(vcpu->kvm, 0, |
| intid - VGIC_NR_PRIVATE_IRQS); |
| } |
| } |
| |
| /* check and disable underflow maintenance IRQ */ |
| cpuif->vgic_hcr &= ~GICH_HCR_UIE; |
| |
| /* |
| * In the next iterations of the vcpu loop, if we sync the |
| * vgic state after flushing it, but before entering the guest |
| * (this happens for pending signals and vmid rollovers), then |
| * make sure we don't pick up any old maintenance interrupts |
| * here. |
| */ |
| cpuif->vgic_eisr = 0; |
| } |
| |
| void vgic_v2_set_underflow(struct kvm_vcpu *vcpu) |
| { |
| struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2; |
| |
| cpuif->vgic_hcr |= GICH_HCR_UIE; |
| } |
| |
| /* |
| * transfer the content of the LRs back into the corresponding ap_list: |
| * - active bit is transferred as is |
| * - pending bit is |
| * - transferred as is in case of edge sensitive IRQs |
| * - set to the line-level (resample time) for level sensitive IRQs |
| */ |
| void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu) |
| { |
| struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2; |
| int lr; |
| |
| for (lr = 0; lr < vcpu->arch.vgic_cpu.used_lrs; lr++) { |
| u32 val = cpuif->vgic_lr[lr]; |
| u32 intid = val & GICH_LR_VIRTUALID; |
| struct vgic_irq *irq; |
| |
| irq = vgic_get_irq(vcpu->kvm, vcpu, intid); |
| |
| spin_lock(&irq->irq_lock); |
| |
| /* Always preserve the active bit */ |
| irq->active = !!(val & GICH_LR_ACTIVE_BIT); |
| |
| /* Edge is the only case where we preserve the pending bit */ |
| if (irq->config == VGIC_CONFIG_EDGE && |
| (val & GICH_LR_PENDING_BIT)) { |
| irq->pending = true; |
| |
| if (vgic_irq_is_sgi(intid)) { |
| u32 cpuid = val & GICH_LR_PHYSID_CPUID; |
| |
| cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT; |
| irq->source |= (1 << cpuid); |
| } |
| } |
| |
| /* |
| * Clear soft pending state when level irqs have been acked. |
| * Always regenerate the pending state. |
| */ |
| if (irq->config == VGIC_CONFIG_LEVEL) { |
| if (!(val & GICH_LR_PENDING_BIT)) |
| irq->soft_pending = false; |
| |
| irq->pending = irq->line_level || irq->soft_pending; |
| } |
| |
| spin_unlock(&irq->irq_lock); |
| vgic_put_irq(vcpu->kvm, irq); |
| } |
| } |
| |
| /* |
| * Populates the particular LR with the state of a given IRQ: |
| * - for an edge sensitive IRQ the pending state is cleared in struct vgic_irq |
| * - for a level sensitive IRQ the pending state value is unchanged; |
| * it is dictated directly by the input level |
| * |
| * If @irq describes an SGI with multiple sources, we choose the |
| * lowest-numbered source VCPU and clear that bit in the source bitmap. |
| * |
| * The irq_lock must be held by the caller. |
| */ |
| void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr) |
| { |
| u32 val = irq->intid; |
| |
| if (irq->pending) { |
| val |= GICH_LR_PENDING_BIT; |
| |
| if (irq->config == VGIC_CONFIG_EDGE) |
| irq->pending = false; |
| |
| if (vgic_irq_is_sgi(irq->intid)) { |
| u32 src = ffs(irq->source); |
| |
| BUG_ON(!src); |
| val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT; |
| irq->source &= ~(1 << (src - 1)); |
| if (irq->source) |
| irq->pending = true; |
| } |
| } |
| |
| if (irq->active) |
| val |= GICH_LR_ACTIVE_BIT; |
| |
| if (irq->hw) { |
| val |= GICH_LR_HW; |
| val |= irq->hwintid << GICH_LR_PHYSID_CPUID_SHIFT; |
| } else { |
| if (irq->config == VGIC_CONFIG_LEVEL) |
| val |= GICH_LR_EOI; |
| } |
| |
| /* The GICv2 LR only holds five bits of priority. */ |
| val |= (irq->priority >> 3) << GICH_LR_PRIORITY_SHIFT; |
| |
| vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = val; |
| } |
| |
| void vgic_v2_clear_lr(struct kvm_vcpu *vcpu, int lr) |
| { |
| vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = 0; |
| } |
| |
| void vgic_v2_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp) |
| { |
| u32 vmcr; |
| |
| vmcr = (vmcrp->ctlr << GICH_VMCR_CTRL_SHIFT) & GICH_VMCR_CTRL_MASK; |
| vmcr |= (vmcrp->abpr << GICH_VMCR_ALIAS_BINPOINT_SHIFT) & |
| GICH_VMCR_ALIAS_BINPOINT_MASK; |
| vmcr |= (vmcrp->bpr << GICH_VMCR_BINPOINT_SHIFT) & |
| GICH_VMCR_BINPOINT_MASK; |
| vmcr |= (vmcrp->pmr << GICH_VMCR_PRIMASK_SHIFT) & |
| GICH_VMCR_PRIMASK_MASK; |
| |
| vcpu->arch.vgic_cpu.vgic_v2.vgic_vmcr = vmcr; |
| } |
| |
| void vgic_v2_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcrp) |
| { |
| u32 vmcr = vcpu->arch.vgic_cpu.vgic_v2.vgic_vmcr; |
| |
| vmcrp->ctlr = (vmcr & GICH_VMCR_CTRL_MASK) >> |
| GICH_VMCR_CTRL_SHIFT; |
| vmcrp->abpr = (vmcr & GICH_VMCR_ALIAS_BINPOINT_MASK) >> |
| GICH_VMCR_ALIAS_BINPOINT_SHIFT; |
| vmcrp->bpr = (vmcr & GICH_VMCR_BINPOINT_MASK) >> |
| GICH_VMCR_BINPOINT_SHIFT; |
| vmcrp->pmr = (vmcr & GICH_VMCR_PRIMASK_MASK) >> |
| GICH_VMCR_PRIMASK_SHIFT; |
| } |
| |
| void vgic_v2_enable(struct kvm_vcpu *vcpu) |
| { |
| /* |
| * By forcing VMCR to zero, the GIC will restore the binary |
| * points to their reset values. Anything else resets to zero |
| * anyway. |
| */ |
| vcpu->arch.vgic_cpu.vgic_v2.vgic_vmcr = 0; |
| vcpu->arch.vgic_cpu.vgic_v2.vgic_elrsr = ~0; |
| |
| /* Get the show on the road... */ |
| vcpu->arch.vgic_cpu.vgic_v2.vgic_hcr = GICH_HCR_EN; |
| } |
| |
| /* check for overlapping regions and for regions crossing the end of memory */ |
| static bool vgic_v2_check_base(gpa_t dist_base, gpa_t cpu_base) |
| { |
| if (dist_base + KVM_VGIC_V2_DIST_SIZE < dist_base) |
| return false; |
| if (cpu_base + KVM_VGIC_V2_CPU_SIZE < cpu_base) |
| return false; |
| |
| if (dist_base + KVM_VGIC_V2_DIST_SIZE <= cpu_base) |
| return true; |
| if (cpu_base + KVM_VGIC_V2_CPU_SIZE <= dist_base) |
| return true; |
| |
| return false; |
| } |
| |
| int vgic_v2_map_resources(struct kvm *kvm) |
| { |
| struct vgic_dist *dist = &kvm->arch.vgic; |
| int ret = 0; |
| |
| if (vgic_ready(kvm)) |
| goto out; |
| |
| if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) || |
| IS_VGIC_ADDR_UNDEF(dist->vgic_cpu_base)) { |
| kvm_err("Need to set vgic cpu and dist addresses first\n"); |
| ret = -ENXIO; |
| goto out; |
| } |
| |
| if (!vgic_v2_check_base(dist->vgic_dist_base, dist->vgic_cpu_base)) { |
| kvm_err("VGIC CPU and dist frames overlap\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* |
| * Initialize the vgic if this hasn't already been done on demand by |
| * accessing the vgic state from userspace. |
| */ |
| ret = vgic_init(kvm); |
| if (ret) { |
| kvm_err("Unable to initialize VGIC dynamic data structures\n"); |
| goto out; |
| } |
| |
| ret = vgic_register_dist_iodev(kvm, dist->vgic_dist_base, VGIC_V2); |
| if (ret) { |
| kvm_err("Unable to register VGIC MMIO regions\n"); |
| goto out; |
| } |
| |
| if (!static_branch_unlikely(&vgic_v2_cpuif_trap)) { |
| ret = kvm_phys_addr_ioremap(kvm, dist->vgic_cpu_base, |
| kvm_vgic_global_state.vcpu_base, |
| KVM_VGIC_V2_CPU_SIZE, true); |
| if (ret) { |
| kvm_err("Unable to remap VGIC CPU to VCPU\n"); |
| goto out; |
| } |
| } |
| |
| dist->ready = true; |
| |
| out: |
| return ret; |
| } |
| |
| DEFINE_STATIC_KEY_FALSE(vgic_v2_cpuif_trap); |
| |
| /** |
| * vgic_v2_probe - probe for a GICv2 compatible interrupt controller in DT |
| * @node: pointer to the DT node |
| * |
| * Returns 0 if a GICv2 has been found, returns an error code otherwise |
| */ |
| int vgic_v2_probe(const struct gic_kvm_info *info) |
| { |
| int ret; |
| u32 vtr; |
| |
| if (!info->vctrl.start) { |
| kvm_err("GICH not present in the firmware table\n"); |
| return -ENXIO; |
| } |
| |
| if (!PAGE_ALIGNED(info->vcpu.start) || |
| !PAGE_ALIGNED(resource_size(&info->vcpu))) { |
| kvm_info("GICV region size/alignment is unsafe, using trapping (reduced performance)\n"); |
| kvm_vgic_global_state.vcpu_base_va = ioremap(info->vcpu.start, |
| resource_size(&info->vcpu)); |
| if (!kvm_vgic_global_state.vcpu_base_va) { |
| kvm_err("Cannot ioremap GICV\n"); |
| return -ENOMEM; |
| } |
| |
| ret = create_hyp_io_mappings(kvm_vgic_global_state.vcpu_base_va, |
| kvm_vgic_global_state.vcpu_base_va + resource_size(&info->vcpu), |
| info->vcpu.start); |
| if (ret) { |
| kvm_err("Cannot map GICV into hyp\n"); |
| goto out; |
| } |
| |
| static_branch_enable(&vgic_v2_cpuif_trap); |
| } |
| |
| kvm_vgic_global_state.vctrl_base = ioremap(info->vctrl.start, |
| resource_size(&info->vctrl)); |
| if (!kvm_vgic_global_state.vctrl_base) { |
| kvm_err("Cannot ioremap GICH\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| vtr = readl_relaxed(kvm_vgic_global_state.vctrl_base + GICH_VTR); |
| kvm_vgic_global_state.nr_lr = (vtr & 0x3f) + 1; |
| |
| ret = create_hyp_io_mappings(kvm_vgic_global_state.vctrl_base, |
| kvm_vgic_global_state.vctrl_base + |
| resource_size(&info->vctrl), |
| info->vctrl.start); |
| if (ret) { |
| kvm_err("Cannot map VCTRL into hyp\n"); |
| goto out; |
| } |
| |
| ret = kvm_register_vgic_device(KVM_DEV_TYPE_ARM_VGIC_V2); |
| if (ret) { |
| kvm_err("Cannot register GICv2 KVM device\n"); |
| goto out; |
| } |
| |
| kvm_vgic_global_state.can_emulate_gicv2 = true; |
| kvm_vgic_global_state.vcpu_base = info->vcpu.start; |
| kvm_vgic_global_state.type = VGIC_V2; |
| kvm_vgic_global_state.max_gic_vcpus = VGIC_V2_MAX_CPUS; |
| |
| kvm_info("vgic-v2@%llx\n", info->vctrl.start); |
| |
| return 0; |
| out: |
| if (kvm_vgic_global_state.vctrl_base) |
| iounmap(kvm_vgic_global_state.vctrl_base); |
| if (kvm_vgic_global_state.vcpu_base_va) |
| iounmap(kvm_vgic_global_state.vcpu_base_va); |
| |
| return ret; |
| } |