drivers/net/cxgb3/vsc8211.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved.
  *
  * This software is available to you under a choice of one of two
  * licenses.  You may choose to be licensed under the terms of the GNU
  * General Public License (GPL) Version 2, available from the file
  * COPYING in the main directory of this source tree, or the
  * OpenIB.org BSD license below:
  *
  *     Redistribution and use in source and binary forms, with or
  *     without modification, are permitted provided that the following
  *     conditions are met:
  *
  *      - Redistributions of source code must retain the above
  *        copyright notice, this list of conditions and the following
  *        disclaimer.
  *
  *      - Redistributions in binary form must reproduce the above
  *        copyright notice, this list of conditions and the following
  *        disclaimer in the documentation and/or other materials
  *        provided with the distribution.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
 #include "common.h"

 /* VSC8211 PHY specific registers. */
 enum {
 	VSC8211_SIGDET_CTRL = 19,
 	VSC8211_EXT_CTRL = 23,
 	VSC8211_INTR_ENABLE = 25,
 	VSC8211_INTR_STATUS = 26,
 	VSC8211_LED_CTRL = 27,
 	VSC8211_AUX_CTRL_STAT = 28,
 	VSC8211_EXT_PAGE_AXS = 31,
 };

 enum {
 	VSC_INTR_RX_ERR = 1 << 0,
 	VSC_INTR_MS_ERR = 1 << 1,  /* master/slave resolution error */
 	VSC_INTR_CABLE = 1 << 2,  /* cable impairment */
 	VSC_INTR_FALSE_CARR = 1 << 3,  /* false carrier */
 	VSC_INTR_MEDIA_CHG = 1 << 4,  /* AMS media change */
 	VSC_INTR_RX_FIFO = 1 << 5,  /* Rx FIFO over/underflow */
 	VSC_INTR_TX_FIFO = 1 << 6,  /* Tx FIFO over/underflow */
 	VSC_INTR_DESCRAMBL = 1 << 7,  /* descrambler lock-lost */
 	VSC_INTR_SYMBOL_ERR = 1 << 8,  /* symbol error */
 	VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */
 	VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */
 	VSC_INTR_DPLX_CHG = 1 << 12, /* duplex change */
 	VSC_INTR_LINK_CHG = 1 << 13, /* link change */
 	VSC_INTR_SPD_CHG = 1 << 14, /* speed change */
 	VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */
 };

 enum {
 	VSC_CTRL_CLAUSE37_VIEW = 1 << 4,   /* Switch to Clause 37 view */
 	VSC_CTRL_MEDIA_MODE_HI = 0xf000    /* High part of media mode select */
 };

 #define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
 			   VSC_INTR_DPLX_CHG | VSC_INTR_SPD_CHG | \
 	 		   VSC_INTR_NEG_DONE)
 #define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
 		   VSC_INTR_ENABLE)

 /* PHY specific auxiliary control & status register fields */
 #define S_ACSR_ACTIPHY_TMR    0
 #define M_ACSR_ACTIPHY_TMR    0x3
 #define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR)

 #define S_ACSR_SPEED    3
 #define M_ACSR_SPEED    0x3
 #define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED)

 #define S_ACSR_DUPLEX 5
 #define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX)

 #define S_ACSR_ACTIPHY 6
 #define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY)

 /*
  * Reset the PHY.  This PHY completes reset immediately so we never wait.
  */
 static int vsc8211_reset(struct cphy *cphy, int wait)
 {
 	return t3_phy_reset(cphy, 0, 0);
 }

 static int vsc8211_intr_enable(struct cphy *cphy)
 {
 	return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, INTR_MASK);
 }

 static int vsc8211_intr_disable(struct cphy *cphy)
 {
 	return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, 0);
 }

 static int vsc8211_intr_clear(struct cphy *cphy)
 {
 	u32 val;

 	/* Clear PHY interrupts by reading the register. */
 	return mdio_read(cphy, 0, VSC8211_INTR_STATUS, &val);
 }

 static int vsc8211_autoneg_enable(struct cphy *cphy)
 {
 	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
 				   BMCR_ANENABLE | BMCR_ANRESTART);
 }

 static int vsc8211_autoneg_restart(struct cphy *cphy)
 {
 	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
 				   BMCR_ANRESTART);
 }

 static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
 				   int *speed, int *duplex, int *fc)
 {
 	unsigned int bmcr, status, lpa, adv;
 	int err, sp = -1, dplx = -1, pause = 0;

 	err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
 	if (!err)
 		err = mdio_read(cphy, 0, MII_BMSR, &status);
 	if (err)
 		return err;

 	if (link_ok) {
 		/*
 		 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
 		 * once more to get the current link state.
 		 */
 		if (!(status & BMSR_LSTATUS))
 			err = mdio_read(cphy, 0, MII_BMSR, &status);
 		if (err)
 			return err;
 		*link_ok = (status & BMSR_LSTATUS) != 0;
 	}
 	if (!(bmcr & BMCR_ANENABLE)) {
 		dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
 		if (bmcr & BMCR_SPEED1000)
 			sp = SPEED_1000;
 		else if (bmcr & BMCR_SPEED100)
 			sp = SPEED_100;
 		else
 			sp = SPEED_10;
 	} else if (status & BMSR_ANEGCOMPLETE) {
 		err = mdio_read(cphy, 0, VSC8211_AUX_CTRL_STAT, &status);
 		if (err)
 			return err;

 		dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
 		sp = G_ACSR_SPEED(status);
 		if (sp == 0)
 			sp = SPEED_10;
 		else if (sp == 1)
 			sp = SPEED_100;
 		else
 			sp = SPEED_1000;

 		if (fc && dplx == DUPLEX_FULL) {
 			err = mdio_read(cphy, 0, MII_LPA, &lpa);
 			if (!err)
 				err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
 			if (err)
 				return err;

 			if (lpa & adv & ADVERTISE_PAUSE_CAP)
 				pause = PAUSE_RX | PAUSE_TX;
 			else if ((lpa & ADVERTISE_PAUSE_CAP) &&
 				 (lpa & ADVERTISE_PAUSE_ASYM) &&
 				 (adv & ADVERTISE_PAUSE_ASYM))
 				pause = PAUSE_TX;
 			else if ((lpa & ADVERTISE_PAUSE_ASYM) &&
 				 (adv & ADVERTISE_PAUSE_CAP))
 				pause = PAUSE_RX;
 		}
 	}
 	if (speed)
 		*speed = sp;
 	if (duplex)
 		*duplex = dplx;
 	if (fc)
 		*fc = pause;
 	return 0;
 }

 static int vsc8211_get_link_status_fiber(struct cphy *cphy, int *link_ok,
 					 int *speed, int *duplex, int *fc)
 {
 	unsigned int bmcr, status, lpa, adv;
 	int err, sp = -1, dplx = -1, pause = 0;

 	err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
 	if (!err)
 		err = mdio_read(cphy, 0, MII_BMSR, &status);
 	if (err)
 		return err;

 	if (link_ok) {
 		/*
 		 * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
 		 * once more to get the current link state.
 		 */
 		if (!(status & BMSR_LSTATUS))
 			err = mdio_read(cphy, 0, MII_BMSR, &status);
 		if (err)
 			return err;
 		*link_ok = (status & BMSR_LSTATUS) != 0;
 	}
 	if (!(bmcr & BMCR_ANENABLE)) {
 		dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
 		if (bmcr & BMCR_SPEED1000)
 			sp = SPEED_1000;
 		else if (bmcr & BMCR_SPEED100)
 			sp = SPEED_100;
 		else
 			sp = SPEED_10;
 	} else if (status & BMSR_ANEGCOMPLETE) {
 		err = mdio_read(cphy, 0, MII_LPA, &lpa);
 		if (!err)
 			err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
 		if (err)
 			return err;

 		if (adv & lpa & ADVERTISE_1000XFULL) {
 			dplx = DUPLEX_FULL;
 			sp = SPEED_1000;
 		} else if (adv & lpa & ADVERTISE_1000XHALF) {
 			dplx = DUPLEX_HALF;
 			sp = SPEED_1000;
 		}

 		if (fc && dplx == DUPLEX_FULL) {
 			if (lpa & adv & ADVERTISE_1000XPAUSE)
 				pause = PAUSE_RX | PAUSE_TX;
 			else if ((lpa & ADVERTISE_1000XPAUSE) &&
 				 (adv & lpa & ADVERTISE_1000XPSE_ASYM))
 				pause = PAUSE_TX;
 			else if ((lpa & ADVERTISE_1000XPSE_ASYM) &&
 				 (adv & ADVERTISE_1000XPAUSE))
 				pause = PAUSE_RX;
 		}
 	}
 	if (speed)
 		*speed = sp;
 	if (duplex)
 		*duplex = dplx;
 	if (fc)
 		*fc = pause;
 	return 0;
 }

 /*
  * Enable/disable auto MDI/MDI-X in forced link speed mode.
  */
 static int vsc8211_set_automdi(struct cphy *phy, int enable)
 {
 	int err;

 	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0x52b5);
 	if (err)
 		return err;

 	err = mdio_write(phy, 0, 18, 0x12);
 	if (err)
 		return err;

 	err = mdio_write(phy, 0, 17, enable ? 0x2803 : 0x3003);
 	if (err)
 		return err;

 	err = mdio_write(phy, 0, 16, 0x87fa);
 	if (err)
 		return err;

 	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
 	if (err)
 		return err;

 	return 0;
 }

 int vsc8211_set_speed_duplex(struct cphy *phy, int speed, int duplex)
 {
 	int err;

 	err = t3_set_phy_speed_duplex(phy, speed, duplex);
 	if (!err)
 		err = vsc8211_set_automdi(phy, 1);
 	return err;
 }

 static int vsc8211_power_down(struct cphy *cphy, int enable)
 {
 	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN,
 				   enable ? BMCR_PDOWN : 0);
 }

 static int vsc8211_intr_handler(struct cphy *cphy)
 {
 	unsigned int cause;
 	int err, cphy_cause = 0;

 	err = mdio_read(cphy, 0, VSC8211_INTR_STATUS, &cause);
 	if (err)
 		return err;

 	cause &= INTR_MASK;
 	if (cause & CFG_CHG_INTR_MASK)
 		cphy_cause |= cphy_cause_link_change;
 	if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO))
 		cphy_cause |= cphy_cause_fifo_error;
 	return cphy_cause;
 }

 static struct cphy_ops vsc8211_ops = {
 	.reset = vsc8211_reset,
 	.intr_enable = vsc8211_intr_enable,
 	.intr_disable = vsc8211_intr_disable,
 	.intr_clear = vsc8211_intr_clear,
 	.intr_handler = vsc8211_intr_handler,
 	.autoneg_enable = vsc8211_autoneg_enable,
 	.autoneg_restart = vsc8211_autoneg_restart,
 	.advertise = t3_phy_advertise,
 	.set_speed_duplex = t3_set_phy_speed_duplex,
 	.get_link_status = vsc8211_get_link_status,
 	.power_down = vsc8211_power_down,
 };

 static struct cphy_ops vsc8211_fiber_ops = {
 	.reset = vsc8211_reset,
 	.intr_enable = vsc8211_intr_enable,
 	.intr_disable = vsc8211_intr_disable,
 	.intr_clear = vsc8211_intr_clear,
 	.intr_handler = vsc8211_intr_handler,
 	.autoneg_enable = vsc8211_autoneg_enable,
 	.autoneg_restart = vsc8211_autoneg_restart,
 	.advertise = t3_phy_advertise_fiber,
 	.set_speed_duplex = t3_set_phy_speed_duplex,
 	.get_link_status = vsc8211_get_link_status_fiber,
 	.power_down = vsc8211_power_down,
 };

 int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
 			int phy_addr, const struct mdio_ops *mdio_ops)
 {
 	int err;
 	unsigned int val;

 	cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops,
 		  SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full |
 		  SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII |
 		  SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T");
 	msleep(20);       /* PHY needs ~10ms to start responding to MDIO */

 	err = mdio_read(phy, 0, VSC8211_EXT_CTRL, &val);
 	if (err)
 		return err;
 	if (val & VSC_CTRL_MEDIA_MODE_HI) {
 		/* copper interface, just need to configure the LEDs */
 		return mdio_write(phy, 0, VSC8211_LED_CTRL, 0x100);
 	}

 	phy->caps = SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg |
 		    SUPPORTED_MII | SUPPORTED_FIBRE | SUPPORTED_IRQ;
 	phy->desc = "1000BASE-X";
 	phy->ops = &vsc8211_fiber_ops;

 	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 1);
 	if (err)
 		return err;

 	err = mdio_write(phy, 0, VSC8211_SIGDET_CTRL, 1);
 	if (err)
 		return err;

 	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
 	if (err)
 		return err;

 	err = mdio_write(phy, 0, VSC8211_EXT_CTRL,
 			 val | VSC_CTRL_CLAUSE37_VIEW);
 	if (err)
 		return err;

 	err = vsc8211_reset(phy, 0);
 	if (err)
 		return err;

 	udelay(5); /* delay after reset before next SMI */
 	return 0;
 }
	/*
	* Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved.
	*
	* This software is available to you under a choice of one of two
	* licenses. You may choose to be licensed under the terms of the GNU
	* General Public License (GPL) Version 2, available from the file
	* COPYING in the main directory of this source tree, or the
	* OpenIB.org BSD license below:
	*
	* Redistribution and use in source and binary forms, with or
	* without modification, are permitted provided that the following
	* conditions are met:
	*
	* - Redistributions of source code must retain the above
	* copyright notice, this list of conditions and the following
	* disclaimer.
	*
	* - Redistributions in binary form must reproduce the above
	* copyright notice, this list of conditions and the following
	* disclaimer in the documentation and/or other materials
	* provided with the distribution.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
	* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
	* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
	* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
	* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
	* SOFTWARE.
	*/
	#include "common.h"

	/* VSC8211 PHY specific registers. */
	enum {
	VSC8211_SIGDET_CTRL = 19,
	VSC8211_EXT_CTRL = 23,
	VSC8211_INTR_ENABLE = 25,
	VSC8211_INTR_STATUS = 26,
	VSC8211_LED_CTRL = 27,
	VSC8211_AUX_CTRL_STAT = 28,
	VSC8211_EXT_PAGE_AXS = 31,
	};

	enum {
	VSC_INTR_RX_ERR = 1 << 0,
	VSC_INTR_MS_ERR = 1 << 1, /* master/slave resolution error */
	VSC_INTR_CABLE = 1 << 2, /* cable impairment */
	VSC_INTR_FALSE_CARR = 1 << 3, /* false carrier */
	VSC_INTR_MEDIA_CHG = 1 << 4, /* AMS media change */
	VSC_INTR_RX_FIFO = 1 << 5, /* Rx FIFO over/underflow */
	VSC_INTR_TX_FIFO = 1 << 6, /* Tx FIFO over/underflow */
	VSC_INTR_DESCRAMBL = 1 << 7, /* descrambler lock-lost */
	VSC_INTR_SYMBOL_ERR = 1 << 8, /* symbol error */
	VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */
	VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */
	VSC_INTR_DPLX_CHG = 1 << 12, /* duplex change */
	VSC_INTR_LINK_CHG = 1 << 13, /* link change */
	VSC_INTR_SPD_CHG = 1 << 14, /* speed change */
	VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */
	};

	enum {
	VSC_CTRL_CLAUSE37_VIEW = 1 << 4, /* Switch to Clause 37 view */
	VSC_CTRL_MEDIA_MODE_HI = 0xf000 /* High part of media mode select */
	};

	#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG \| VSC_INTR_NEG_ERR \| \
	VSC_INTR_DPLX_CHG \| VSC_INTR_SPD_CHG \| \
	VSC_INTR_NEG_DONE)
	#define INTR_MASK (CFG_CHG_INTR_MASK \| VSC_INTR_TX_FIFO \| VSC_INTR_RX_FIFO \| \
	VSC_INTR_ENABLE)

	/* PHY specific auxiliary control & status register fields */
	#define S_ACSR_ACTIPHY_TMR 0
	#define M_ACSR_ACTIPHY_TMR 0x3
	#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR)

	#define S_ACSR_SPEED 3
	#define M_ACSR_SPEED 0x3
	#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED)

	#define S_ACSR_DUPLEX 5
	#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX)

	#define S_ACSR_ACTIPHY 6
	#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY)

	/*
	* Reset the PHY. This PHY completes reset immediately so we never wait.
	*/
	static int vsc8211_reset(struct cphy *cphy, int wait)
	{
	return t3_phy_reset(cphy, 0, 0);
	}

	static int vsc8211_intr_enable(struct cphy *cphy)
	{
	return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, INTR_MASK);
	}

	static int vsc8211_intr_disable(struct cphy *cphy)
	{
	return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, 0);
	}

	static int vsc8211_intr_clear(struct cphy *cphy)
	{
	u32 val;

	/* Clear PHY interrupts by reading the register. */
	return mdio_read(cphy, 0, VSC8211_INTR_STATUS, &val);
	}

	static int vsc8211_autoneg_enable(struct cphy *cphy)
	{
	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN \| BMCR_ISOLATE,
	BMCR_ANENABLE \| BMCR_ANRESTART);
	}

	static int vsc8211_autoneg_restart(struct cphy *cphy)
	{
	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN \| BMCR_ISOLATE,
	BMCR_ANRESTART);
	}

	static int vsc8211_get_link_status(struct cphy cphy, int link_ok,
	int speed, int duplex, int *fc)
	{
	unsigned int bmcr, status, lpa, adv;
	int err, sp = -1, dplx = -1, pause = 0;

	err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
	if (!err)
	err = mdio_read(cphy, 0, MII_BMSR, &status);
	if (err)
	return err;

	if (link_ok) {
	/*
	* BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
	* once more to get the current link state.
	*/
	if (!(status & BMSR_LSTATUS))
	err = mdio_read(cphy, 0, MII_BMSR, &status);
	if (err)
	return err;
	*link_ok = (status & BMSR_LSTATUS) != 0;
	}
	if (!(bmcr & BMCR_ANENABLE)) {
	dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
	if (bmcr & BMCR_SPEED1000)
	sp = SPEED_1000;
	else if (bmcr & BMCR_SPEED100)
	sp = SPEED_100;
	else
	sp = SPEED_10;
	} else if (status & BMSR_ANEGCOMPLETE) {
	err = mdio_read(cphy, 0, VSC8211_AUX_CTRL_STAT, &status);
	if (err)
	return err;

	dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
	sp = G_ACSR_SPEED(status);
	if (sp == 0)
	sp = SPEED_10;
	else if (sp == 1)
	sp = SPEED_100;
	else
	sp = SPEED_1000;

	if (fc && dplx == DUPLEX_FULL) {
	err = mdio_read(cphy, 0, MII_LPA, &lpa);
	if (!err)
	err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
	if (err)
	return err;

	if (lpa & adv & ADVERTISE_PAUSE_CAP)
	pause = PAUSE_RX \| PAUSE_TX;
	else if ((lpa & ADVERTISE_PAUSE_CAP) &&
	(lpa & ADVERTISE_PAUSE_ASYM) &&
	(adv & ADVERTISE_PAUSE_ASYM))
	pause = PAUSE_TX;
	else if ((lpa & ADVERTISE_PAUSE_ASYM) &&
	(adv & ADVERTISE_PAUSE_CAP))
	pause = PAUSE_RX;
	}
	}
	if (speed)
	*speed = sp;
	if (duplex)
	*duplex = dplx;
	if (fc)
	*fc = pause;
	return 0;
	}

	static int vsc8211_get_link_status_fiber(struct cphy cphy, int link_ok,
	int speed, int duplex, int *fc)
	{
	unsigned int bmcr, status, lpa, adv;
	int err, sp = -1, dplx = -1, pause = 0;

	err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
	if (!err)
	err = mdio_read(cphy, 0, MII_BMSR, &status);
	if (err)
	return err;

	if (link_ok) {
	/*
	* BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
	* once more to get the current link state.
	*/
	if (!(status & BMSR_LSTATUS))
	err = mdio_read(cphy, 0, MII_BMSR, &status);
	if (err)
	return err;
	*link_ok = (status & BMSR_LSTATUS) != 0;
	}
	if (!(bmcr & BMCR_ANENABLE)) {
	dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
	if (bmcr & BMCR_SPEED1000)
	sp = SPEED_1000;
	else if (bmcr & BMCR_SPEED100)
	sp = SPEED_100;
	else
	sp = SPEED_10;
	} else if (status & BMSR_ANEGCOMPLETE) {
	err = mdio_read(cphy, 0, MII_LPA, &lpa);
	if (!err)
	err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
	if (err)
	return err;

	if (adv & lpa & ADVERTISE_1000XFULL) {
	dplx = DUPLEX_FULL;
	sp = SPEED_1000;
	} else if (adv & lpa & ADVERTISE_1000XHALF) {
	dplx = DUPLEX_HALF;
	sp = SPEED_1000;
	}

	if (fc && dplx == DUPLEX_FULL) {
	if (lpa & adv & ADVERTISE_1000XPAUSE)
	pause = PAUSE_RX \| PAUSE_TX;
	else if ((lpa & ADVERTISE_1000XPAUSE) &&
	(adv & lpa & ADVERTISE_1000XPSE_ASYM))
	pause = PAUSE_TX;
	else if ((lpa & ADVERTISE_1000XPSE_ASYM) &&
	(adv & ADVERTISE_1000XPAUSE))
	pause = PAUSE_RX;
	}
	}
	if (speed)
	*speed = sp;
	if (duplex)
	*duplex = dplx;
	if (fc)
	*fc = pause;
	return 0;
	}

	/*
	* Enable/disable auto MDI/MDI-X in forced link speed mode.
	*/
	static int vsc8211_set_automdi(struct cphy *phy, int enable)
	{
	int err;

	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0x52b5);
	if (err)
	return err;

	err = mdio_write(phy, 0, 18, 0x12);
	if (err)
	return err;

	err = mdio_write(phy, 0, 17, enable ? 0x2803 : 0x3003);
	if (err)
	return err;

	err = mdio_write(phy, 0, 16, 0x87fa);
	if (err)
	return err;

	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
	if (err)
	return err;

	return 0;
	}

	int vsc8211_set_speed_duplex(struct cphy *phy, int speed, int duplex)
	{
	int err;

	err = t3_set_phy_speed_duplex(phy, speed, duplex);
	if (!err)
	err = vsc8211_set_automdi(phy, 1);
	return err;
	}

	static int vsc8211_power_down(struct cphy *cphy, int enable)
	{
	return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN,
	enable ? BMCR_PDOWN : 0);
	}

	static int vsc8211_intr_handler(struct cphy *cphy)
	{
	unsigned int cause;
	int err, cphy_cause = 0;

	err = mdio_read(cphy, 0, VSC8211_INTR_STATUS, &cause);
	if (err)
	return err;

	cause &= INTR_MASK;
	if (cause & CFG_CHG_INTR_MASK)
	cphy_cause \|= cphy_cause_link_change;
	if (cause & (VSC_INTR_RX_FIFO \| VSC_INTR_TX_FIFO))
	cphy_cause \|= cphy_cause_fifo_error;
	return cphy_cause;
	}

	static struct cphy_ops vsc8211_ops = {
	.reset = vsc8211_reset,
	.intr_enable = vsc8211_intr_enable,
	.intr_disable = vsc8211_intr_disable,
	.intr_clear = vsc8211_intr_clear,
	.intr_handler = vsc8211_intr_handler,
	.autoneg_enable = vsc8211_autoneg_enable,
	.autoneg_restart = vsc8211_autoneg_restart,
	.advertise = t3_phy_advertise,
	.set_speed_duplex = t3_set_phy_speed_duplex,
	.get_link_status = vsc8211_get_link_status,
	.power_down = vsc8211_power_down,
	};

	static struct cphy_ops vsc8211_fiber_ops = {
	.reset = vsc8211_reset,
	.intr_enable = vsc8211_intr_enable,
	.intr_disable = vsc8211_intr_disable,
	.intr_clear = vsc8211_intr_clear,
	.intr_handler = vsc8211_intr_handler,
	.autoneg_enable = vsc8211_autoneg_enable,
	.autoneg_restart = vsc8211_autoneg_restart,
	.advertise = t3_phy_advertise_fiber,
	.set_speed_duplex = t3_set_phy_speed_duplex,
	.get_link_status = vsc8211_get_link_status_fiber,
	.power_down = vsc8211_power_down,
	};

	int t3_vsc8211_phy_prep(struct cphy phy, struct adapter adapter,
	int phy_addr, const struct mdio_ops *mdio_ops)
	{
	int err;
	unsigned int val;

	cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops,
	SUPPORTED_10baseT_Full \| SUPPORTED_100baseT_Full \|
	SUPPORTED_1000baseT_Full \| SUPPORTED_Autoneg \| SUPPORTED_MII \|
	SUPPORTED_TP \| SUPPORTED_IRQ, "10/100/1000BASE-T");
	msleep(20); /* PHY needs ~10ms to start responding to MDIO */

	err = mdio_read(phy, 0, VSC8211_EXT_CTRL, &val);
	if (err)
	return err;
	if (val & VSC_CTRL_MEDIA_MODE_HI) {
	/* copper interface, just need to configure the LEDs */
	return mdio_write(phy, 0, VSC8211_LED_CTRL, 0x100);
	}

	phy->caps = SUPPORTED_1000baseT_Full \| SUPPORTED_Autoneg \|
	SUPPORTED_MII \| SUPPORTED_FIBRE \| SUPPORTED_IRQ;
	phy->desc = "1000BASE-X";
	phy->ops = &vsc8211_fiber_ops;

	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 1);
	if (err)
	return err;

	err = mdio_write(phy, 0, VSC8211_SIGDET_CTRL, 1);
	if (err)
	return err;

	err = mdio_write(phy, 0, VSC8211_EXT_PAGE_AXS, 0);
	if (err)
	return err;

	err = mdio_write(phy, 0, VSC8211_EXT_CTRL,
	val \| VSC_CTRL_CLAUSE37_VIEW);
	if (err)
	return err;

	err = vsc8211_reset(phy, 0);
	if (err)
	return err;

	udelay(5); /* delay after reset before next SMI */
	return 0;
	}