[PATCH] S2io: Code cleanup
Hi,
We are submitting a series of 13 patches to support our Xframe I and
Xframe II line of products. The patches can be categorized as follows:
Patches 1-8 : Changes applicable to both Xframe I and II
Patches 9-11: Xframe II specific features
Patch 12: Addresses issues found during testing cycle.
Patch 13: Incorpoates mostly the review comments from community
and some last moment bug fixes.
Please review the patches and let us know your comments.
Starting with patch 1 below.
This patch involves cosmetic changes(tabs and indentation,
regrouping of transmit and receive data structures, typecasting,
code cleanup).
Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Raghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index ea638b1..0721e78 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -11,29 +11,28 @@
* See the file COPYING in this distribution for more information.
*
* Credits:
- * Jeff Garzik : For pointing out the improper error condition
- * check in the s2io_xmit routine and also some
- * issues in the Tx watch dog function. Also for
- * patiently answering all those innumerable
+ * Jeff Garzik : For pointing out the improper error condition
+ * check in the s2io_xmit routine and also some
+ * issues in the Tx watch dog function. Also for
+ * patiently answering all those innumerable
* questions regaring the 2.6 porting issues.
* Stephen Hemminger : Providing proper 2.6 porting mechanism for some
* macros available only in 2.6 Kernel.
- * Francois Romieu : For pointing out all code part that were
+ * Francois Romieu : For pointing out all code part that were
* deprecated and also styling related comments.
- * Grant Grundler : For helping me get rid of some Architecture
+ * Grant Grundler : For helping me get rid of some Architecture
* dependent code.
* Christopher Hellwig : Some more 2.6 specific issues in the driver.
- *
+ *
* The module loadable parameters that are supported by the driver and a brief
* explaination of all the variables.
- * rx_ring_num : This can be used to program the number of receive rings used
- * in the driver.
- * rx_ring_len: This defines the number of descriptors each ring can have. This
+ * rx_ring_num : This can be used to program the number of receive rings used
+ * in the driver.
+ * rx_ring_len: This defines the number of descriptors each ring can have. This
* is also an array of size 8.
* tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
- * tx_fifo_len: This too is an array of 8. Each element defines the number of
+ * tx_fifo_len: This too is an array of 8. Each element defines the number of
* Tx descriptors that can be associated with each corresponding FIFO.
- * in PCI Configuration space.
************************************************************************/
#include <linux/config.h>
@@ -57,19 +56,19 @@
#include <linux/version.h>
#include <linux/workqueue.h>
-#include <asm/io.h>
#include <asm/system.h>
#include <asm/uaccess.h>
+#include <asm/io.h>
/* local include */
#include "s2io.h"
#include "s2io-regs.h"
/* S2io Driver name & version. */
-static char s2io_driver_name[] = "s2io";
-static char s2io_driver_version[] = "Version 1.7.7.1";
+static char s2io_driver_name[] = "Neterion";
+static char s2io_driver_version[] = "Version 1.7.7";
-/*
+/*
* Cards with following subsystem_id have a link state indication
* problem, 600B, 600C, 600D, 640B, 640C and 640D.
* macro below identifies these cards given the subsystem_id.
@@ -86,9 +85,13 @@
static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring)
{
int level = 0;
- if ((sp->pkt_cnt[ring] - rxb_size) > 16) {
+ mac_info_t *mac_control;
+
+ mac_control = &sp->mac_control;
+ if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) {
level = LOW;
- if ((sp->pkt_cnt[ring] - rxb_size) < MAX_RXDS_PER_BLOCK) {
+ if ((mac_control->rings[ring].pkt_cnt - rxb_size) <
+ MAX_RXDS_PER_BLOCK) {
level = PANIC;
}
}
@@ -153,8 +156,7 @@
#define S2IO_TEST_LEN sizeof(s2io_gstrings) / ETH_GSTRING_LEN
#define S2IO_STRINGS_LEN S2IO_TEST_LEN * ETH_GSTRING_LEN
-
-/*
+/*
* Constants to be programmed into the Xena's registers, to configure
* the XAUI.
*/
@@ -196,8 +198,7 @@
END_SIGN
};
-
-/*
+/*
* Constants for Fixing the MacAddress problem seen mostly on
* Alpha machines.
*/
@@ -227,6 +228,8 @@
static unsigned int rx_ring_sz[MAX_RX_RINGS] =
{[0 ...(MAX_RX_RINGS - 1)] = 0 };
static unsigned int Stats_refresh_time = 4;
+static unsigned int rts_frm_len[MAX_RX_RINGS] =
+ {[0 ...(MAX_RX_RINGS - 1)] = 0 };
static unsigned int rmac_pause_time = 65535;
static unsigned int mc_pause_threshold_q0q3 = 187;
static unsigned int mc_pause_threshold_q4q7 = 187;
@@ -237,9 +240,9 @@
static unsigned int indicate_max_pkts;
#endif
-/*
+/*
* S2IO device table.
- * This table lists all the devices that this driver supports.
+ * This table lists all the devices that this driver supports.
*/
static struct pci_device_id s2io_tbl[] __devinitdata = {
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
@@ -247,9 +250,9 @@
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
PCI_ANY_ID, PCI_ANY_ID},
{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
- PCI_ANY_ID, PCI_ANY_ID},
- {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
- PCI_ANY_ID, PCI_ANY_ID},
+ PCI_ANY_ID, PCI_ANY_ID},
+ {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
+ PCI_ANY_ID, PCI_ANY_ID},
{0,}
};
@@ -268,8 +271,8 @@
/**
* init_shared_mem - Allocation and Initialization of Memory
* @nic: Device private variable.
- * Description: The function allocates all the memory areas shared
- * between the NIC and the driver. This includes Tx descriptors,
+ * Description: The function allocates all the memory areas shared
+ * between the NIC and the driver. This includes Tx descriptors,
* Rx descriptors and the statistics block.
*/
@@ -279,11 +282,11 @@
void *tmp_v_addr, *tmp_v_addr_next;
dma_addr_t tmp_p_addr, tmp_p_addr_next;
RxD_block_t *pre_rxd_blk = NULL;
- int i, j, blk_cnt;
+ int i, j, blk_cnt, rx_sz, tx_sz;
int lst_size, lst_per_page;
struct net_device *dev = nic->dev;
#ifdef CONFIG_2BUFF_MODE
- unsigned long tmp;
+ u64 tmp;
buffAdd_t *ba;
#endif
@@ -308,28 +311,34 @@
}
lst_size = (sizeof(TxD_t) * config->max_txds);
+ tx_sz = lst_size * size;
lst_per_page = PAGE_SIZE / lst_size;
for (i = 0; i < config->tx_fifo_num; i++) {
int fifo_len = config->tx_cfg[i].fifo_len;
int list_holder_size = fifo_len * sizeof(list_info_hold_t);
- nic->list_info[i] = kmalloc(list_holder_size, GFP_KERNEL);
- if (!nic->list_info[i]) {
+ mac_control->fifos[i].list_info = kmalloc(list_holder_size,
+ GFP_KERNEL);
+ if (!mac_control->fifos[i].list_info) {
DBG_PRINT(ERR_DBG,
"Malloc failed for list_info\n");
return -ENOMEM;
}
- memset(nic->list_info[i], 0, list_holder_size);
+ memset(mac_control->fifos[i].list_info, 0, list_holder_size);
}
for (i = 0; i < config->tx_fifo_num; i++) {
int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
lst_per_page);
- mac_control->tx_curr_put_info[i].offset = 0;
- mac_control->tx_curr_put_info[i].fifo_len =
+ mac_control->fifos[i].tx_curr_put_info.offset = 0;
+ mac_control->fifos[i].tx_curr_put_info.fifo_len =
config->tx_cfg[i].fifo_len - 1;
- mac_control->tx_curr_get_info[i].offset = 0;
- mac_control->tx_curr_get_info[i].fifo_len =
+ mac_control->fifos[i].tx_curr_get_info.offset = 0;
+ mac_control->fifos[i].tx_curr_get_info.fifo_len =
config->tx_cfg[i].fifo_len - 1;
+ mac_control->fifos[i].fifo_no = i;
+ mac_control->fifos[i].nic = nic;
+ mac_control->fifos[i].max_txds = MAX_SKB_FRAGS;
+
for (j = 0; j < page_num; j++) {
int k = 0;
dma_addr_t tmp_p;
@@ -345,16 +354,15 @@
while (k < lst_per_page) {
int l = (j * lst_per_page) + k;
if (l == config->tx_cfg[i].fifo_len)
- goto end_txd_alloc;
- nic->list_info[i][l].list_virt_addr =
+ break;
+ mac_control->fifos[i].list_info[l].list_virt_addr =
tmp_v + (k * lst_size);
- nic->list_info[i][l].list_phy_addr =
+ mac_control->fifos[i].list_info[l].list_phy_addr =
tmp_p + (k * lst_size);
k++;
}
}
}
- end_txd_alloc:
/* Allocation and initialization of RXDs in Rings */
size = 0;
@@ -367,21 +375,26 @@
return FAILURE;
}
size += config->rx_cfg[i].num_rxd;
- nic->block_count[i] =
+ mac_control->rings[i].block_count =
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
- nic->pkt_cnt[i] =
- config->rx_cfg[i].num_rxd - nic->block_count[i];
+ mac_control->rings[i].pkt_cnt =
+ config->rx_cfg[i].num_rxd - mac_control->rings[i].block_count;
}
+ size = (size * (sizeof(RxD_t)));
+ rx_sz = size;
for (i = 0; i < config->rx_ring_num; i++) {
- mac_control->rx_curr_get_info[i].block_index = 0;
- mac_control->rx_curr_get_info[i].offset = 0;
- mac_control->rx_curr_get_info[i].ring_len =
+ mac_control->rings[i].rx_curr_get_info.block_index = 0;
+ mac_control->rings[i].rx_curr_get_info.offset = 0;
+ mac_control->rings[i].rx_curr_get_info.ring_len =
config->rx_cfg[i].num_rxd - 1;
- mac_control->rx_curr_put_info[i].block_index = 0;
- mac_control->rx_curr_put_info[i].offset = 0;
- mac_control->rx_curr_put_info[i].ring_len =
+ mac_control->rings[i].rx_curr_put_info.block_index = 0;
+ mac_control->rings[i].rx_curr_put_info.offset = 0;
+ mac_control->rings[i].rx_curr_put_info.ring_len =
config->rx_cfg[i].num_rxd - 1;
+ mac_control->rings[i].nic = nic;
+ mac_control->rings[i].ring_no = i;
+
blk_cnt =
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
/* Allocating all the Rx blocks */
@@ -395,32 +408,36 @@
&tmp_p_addr);
if (tmp_v_addr == NULL) {
/*
- * In case of failure, free_shared_mem()
- * is called, which should free any
- * memory that was alloced till the
+ * In case of failure, free_shared_mem()
+ * is called, which should free any
+ * memory that was alloced till the
* failure happened.
*/
- nic->rx_blocks[i][j].block_virt_addr =
+ mac_control->rings[i].rx_blocks[j].block_virt_addr =
tmp_v_addr;
return -ENOMEM;
}
memset(tmp_v_addr, 0, size);
- nic->rx_blocks[i][j].block_virt_addr = tmp_v_addr;
- nic->rx_blocks[i][j].block_dma_addr = tmp_p_addr;
+ mac_control->rings[i].rx_blocks[j].block_virt_addr =
+ tmp_v_addr;
+ mac_control->rings[i].rx_blocks[j].block_dma_addr =
+ tmp_p_addr;
}
/* Interlinking all Rx Blocks */
for (j = 0; j < blk_cnt; j++) {
- tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr;
+ tmp_v_addr =
+ mac_control->rings[i].rx_blocks[j].block_virt_addr;
tmp_v_addr_next =
- nic->rx_blocks[i][(j + 1) %
+ mac_control->rings[i].rx_blocks[(j + 1) %
blk_cnt].block_virt_addr;
- tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr;
+ tmp_p_addr =
+ mac_control->rings[i].rx_blocks[j].block_dma_addr;
tmp_p_addr_next =
- nic->rx_blocks[i][(j + 1) %
+ mac_control->rings[i].rx_blocks[(j + 1) %
blk_cnt].block_dma_addr;
pre_rxd_blk = (RxD_block_t *) tmp_v_addr;
- pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD
+ pre_rxd_blk->reserved_1 = END_OF_BLOCK; /* last RxD
* marker.
*/
#ifndef CONFIG_2BUFF_MODE
@@ -433,43 +450,43 @@
}
#ifdef CONFIG_2BUFF_MODE
- /*
+ /*
* Allocation of Storages for buffer addresses in 2BUFF mode
* and the buffers as well.
*/
for (i = 0; i < config->rx_ring_num; i++) {
blk_cnt =
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
- nic->ba[i] = kmalloc((sizeof(buffAdd_t *) * blk_cnt),
+ mac_control->rings[i].ba = kmalloc((sizeof(buffAdd_t *) * blk_cnt),
GFP_KERNEL);
- if (!nic->ba[i])
+ if (!mac_control->rings[i].ba)
return -ENOMEM;
for (j = 0; j < blk_cnt; j++) {
int k = 0;
- nic->ba[i][j] = kmalloc((sizeof(buffAdd_t) *
+ mac_control->rings[i].ba[j] = kmalloc((sizeof(buffAdd_t) *
(MAX_RXDS_PER_BLOCK + 1)),
GFP_KERNEL);
- if (!nic->ba[i][j])
+ if (!mac_control->rings[i].ba[j])
return -ENOMEM;
while (k != MAX_RXDS_PER_BLOCK) {
- ba = &nic->ba[i][j][k];
+ ba = &mac_control->rings[i].ba[j][k];
- ba->ba_0_org = kmalloc
+ ba->ba_0_org = (void *) kmalloc
(BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
if (!ba->ba_0_org)
return -ENOMEM;
- tmp = (unsigned long) ba->ba_0_org;
+ tmp = (u64) ba->ba_0_org;
tmp += ALIGN_SIZE;
- tmp &= ~((unsigned long) ALIGN_SIZE);
+ tmp &= ~((u64) ALIGN_SIZE);
ba->ba_0 = (void *) tmp;
- ba->ba_1_org = kmalloc
+ ba->ba_1_org = (void *) kmalloc
(BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
if (!ba->ba_1_org)
return -ENOMEM;
- tmp = (unsigned long) ba->ba_1_org;
+ tmp = (u64) ba->ba_1_org;
tmp += ALIGN_SIZE;
- tmp &= ~((unsigned long) ALIGN_SIZE);
+ tmp &= ~((u64) ALIGN_SIZE);
ba->ba_1 = (void *) tmp;
k++;
}
@@ -483,9 +500,9 @@
(nic->pdev, size, &mac_control->stats_mem_phy);
if (!mac_control->stats_mem) {
- /*
- * In case of failure, free_shared_mem() is called, which
- * should free any memory that was alloced till the
+ /*
+ * In case of failure, free_shared_mem() is called, which
+ * should free any memory that was alloced till the
* failure happened.
*/
return -ENOMEM;
@@ -495,15 +512,14 @@
tmp_v_addr = mac_control->stats_mem;
mac_control->stats_info = (StatInfo_t *) tmp_v_addr;
memset(tmp_v_addr, 0, size);
-
DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
(unsigned long long) tmp_p_addr);
return SUCCESS;
}
-/**
- * free_shared_mem - Free the allocated Memory
+/**
+ * free_shared_mem - Free the allocated Memory
* @nic: Device private variable.
* Description: This function is to free all memory locations allocated by
* the init_shared_mem() function and return it to the kernel.
@@ -533,15 +549,18 @@
lst_per_page);
for (j = 0; j < page_num; j++) {
int mem_blks = (j * lst_per_page);
- if (!nic->list_info[i][mem_blks].list_virt_addr)
+ if (!mac_control->fifos[i].list_info[mem_blks].
+ list_virt_addr)
break;
pci_free_consistent(nic->pdev, PAGE_SIZE,
- nic->list_info[i][mem_blks].
+ mac_control->fifos[i].
+ list_info[mem_blks].
list_virt_addr,
- nic->list_info[i][mem_blks].
+ mac_control->fifos[i].
+ list_info[mem_blks].
list_phy_addr);
}
- kfree(nic->list_info[i]);
+ kfree(mac_control->fifos[i].list_info);
}
#ifndef CONFIG_2BUFF_MODE
@@ -550,10 +569,12 @@
size = SIZE_OF_BLOCK;
#endif
for (i = 0; i < config->rx_ring_num; i++) {
- blk_cnt = nic->block_count[i];
+ blk_cnt = mac_control->rings[i].block_count;
for (j = 0; j < blk_cnt; j++) {
- tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr;
- tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr;
+ tmp_v_addr = mac_control->rings[i].rx_blocks[j].
+ block_virt_addr;
+ tmp_p_addr = mac_control->rings[i].rx_blocks[j].
+ block_dma_addr;
if (tmp_v_addr == NULL)
break;
pci_free_consistent(nic->pdev, size,
@@ -566,35 +587,21 @@
for (i = 0; i < config->rx_ring_num; i++) {
blk_cnt =
config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
- if (!nic->ba[i])
- goto end_free;
for (j = 0; j < blk_cnt; j++) {
int k = 0;
- if (!nic->ba[i][j]) {
- kfree(nic->ba[i]);
- goto end_free;
- }
+ if (!mac_control->rings[i].ba[j])
+ continue;
while (k != MAX_RXDS_PER_BLOCK) {
- buffAdd_t *ba = &nic->ba[i][j][k];
- if (!ba || !ba->ba_0_org || !ba->ba_1_org)
- {
- kfree(nic->ba[i]);
- kfree(nic->ba[i][j]);
- if(ba->ba_0_org)
- kfree(ba->ba_0_org);
- if(ba->ba_1_org)
- kfree(ba->ba_1_org);
- goto end_free;
- }
+ buffAdd_t *ba = &mac_control->rings[i].ba[j][k];
kfree(ba->ba_0_org);
kfree(ba->ba_1_org);
k++;
}
- kfree(nic->ba[i][j]);
+ kfree(mac_control->rings[i].ba[j]);
}
- kfree(nic->ba[i]);
+ if (mac_control->rings[i].ba)
+ kfree(mac_control->rings[i].ba);
}
-end_free:
#endif
if (mac_control->stats_mem) {
@@ -605,12 +612,12 @@
}
}
-/**
- * init_nic - Initialization of hardware
+/**
+ * init_nic - Initialization of hardware
* @nic: device peivate variable
- * Description: The function sequentially configures every block
- * of the H/W from their reset values.
- * Return Value: SUCCESS on success and
+ * Description: The function sequentially configures every block
+ * of the H/W from their reset values.
+ * Return Value: SUCCESS on success and
* '-1' on failure (endian settings incorrect).
*/
@@ -626,12 +633,13 @@
struct config_param *config;
int mdio_cnt = 0, dtx_cnt = 0;
unsigned long long mem_share;
+ int mem_size;
mac_control = &nic->mac_control;
config = &nic->config;
- /* Initialize swapper control register */
- if (s2io_set_swapper(nic)) {
+ /* to set the swapper control on the card */
+ if(s2io_set_swapper(nic)) {
DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
return -1;
}
@@ -639,8 +647,8 @@
/* Remove XGXS from reset state */
val64 = 0;
writeq(val64, &bar0->sw_reset);
- val64 = readq(&bar0->sw_reset);
msleep(500);
+ val64 = readq(&bar0->sw_reset);
/* Enable Receiving broadcasts */
add = &bar0->mac_cfg;
@@ -660,18 +668,18 @@
val64 = dev->mtu;
writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
- /*
- * Configuring the XAUI Interface of Xena.
+ /*
+ * Configuring the XAUI Interface of Xena.
* ***************************************
- * To Configure the Xena's XAUI, one has to write a series
- * of 64 bit values into two registers in a particular
- * sequence. Hence a macro 'SWITCH_SIGN' has been defined
- * which will be defined in the array of configuration values
- * (default_dtx_cfg & default_mdio_cfg) at appropriate places
- * to switch writing from one regsiter to another. We continue
+ * To Configure the Xena's XAUI, one has to write a series
+ * of 64 bit values into two registers in a particular
+ * sequence. Hence a macro 'SWITCH_SIGN' has been defined
+ * which will be defined in the array of configuration values
+ * (default_dtx_cfg & default_mdio_cfg) at appropriate places
+ * to switch writing from one regsiter to another. We continue
* writing these values until we encounter the 'END_SIGN' macro.
- * For example, After making a series of 21 writes into
- * dtx_control register the 'SWITCH_SIGN' appears and hence we
+ * For example, After making a series of 21 writes into
+ * dtx_control register the 'SWITCH_SIGN' appears and hence we
* start writing into mdio_control until we encounter END_SIGN.
*/
while (1) {
@@ -752,8 +760,8 @@
DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
&bar0->tx_fifo_partition_0, (unsigned long long) val64);
- /*
- * Initialization of Tx_PA_CONFIG register to ignore packet
+ /*
+ * Initialization of Tx_PA_CONFIG register to ignore packet
* integrity checking.
*/
val64 = readq(&bar0->tx_pa_cfg);
@@ -770,54 +778,54 @@
}
writeq(val64, &bar0->rx_queue_priority);
- /*
- * Allocating equal share of memory to all the
+ /*
+ * Allocating equal share of memory to all the
* configured Rings.
*/
val64 = 0;
+ mem_size = 64;
for (i = 0; i < config->rx_ring_num; i++) {
switch (i) {
case 0:
- mem_share = (64 / config->rx_ring_num +
- 64 % config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num +
+ mem_size % config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
continue;
case 1:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
continue;
case 2:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
continue;
case 3:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
continue;
case 4:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
continue;
case 5:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
continue;
case 6:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
continue;
case 7:
- mem_share = (64 / config->rx_ring_num);
+ mem_share = (mem_size / config->rx_ring_num);
val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
continue;
}
}
writeq(val64, &bar0->rx_queue_cfg);
- /*
- * Initializing the Tx round robin registers to 0.
- * Filling Tx and Rx round robin registers as per the
- * number of FIFOs and Rings is still TODO.
+ /* Initializing the Tx round robin registers to 0
+ * filling tx and rx round robin registers as per
+ * the number of FIFOs and Rings is still TODO
*/
writeq(0, &bar0->tx_w_round_robin_0);
writeq(0, &bar0->tx_w_round_robin_1);
@@ -825,30 +833,30 @@
writeq(0, &bar0->tx_w_round_robin_3);
writeq(0, &bar0->tx_w_round_robin_4);
- /*
+ /*
* TODO
- * Disable Rx steering. Hard coding all packets be steered to
- * Queue 0 for now.
+ * Disable Rx steering. Hard coding all packets to be steered to
+ * Queue 0 for now.
*/
val64 = 0x8080808080808080ULL;
writeq(val64, &bar0->rts_qos_steering);
/* UDP Fix */
val64 = 0;
- for (i = 1; i < 8; i++)
+ for (i = 0; i < 8; i++)
writeq(val64, &bar0->rts_frm_len_n[i]);
- /* Set rts_frm_len register for fifo 0 */
- writeq(MAC_RTS_FRM_LEN_SET(dev->mtu + 22),
- &bar0->rts_frm_len_n[0]);
+ /* Set the default rts frame length for ring0 */
+ writeq(MAC_RTS_FRM_LEN_SET(dev->mtu+22),
+ &bar0->rts_frm_len_n[0]);
- /* Enable statistics */
+ /* Program statistics memory */
writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
val64 = SET_UPDT_PERIOD(Stats_refresh_time) |
STAT_CFG_STAT_RO | STAT_CFG_STAT_EN;
writeq(val64, &bar0->stat_cfg);
- /*
+ /*
* Initializing the sampling rate for the device to calculate the
* bandwidth utilization.
*/
@@ -857,11 +865,12 @@
writeq(val64, &bar0->mac_link_util);
- /*
- * Initializing the Transmit and Receive Traffic Interrupt
+ /*
+ * Initializing the Transmit and Receive Traffic Interrupt
* Scheme.
*/
- /* TTI Initialization. Default Tx timer gets us about
+ /*
+ * TTI Initialization. Default Tx timer gets us about
* 250 interrupts per sec. Continuous interrupts are enabled
* by default.
*/
@@ -880,7 +889,7 @@
val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
writeq(val64, &bar0->tti_command_mem);
- /*
+ /*
* Once the operation completes, the Strobe bit of the command
* register will be reset. We poll for this particular condition
* We wait for a maximum of 500ms for the operation to complete,
@@ -917,7 +926,7 @@
val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD;
writeq(val64, &bar0->rti_command_mem);
- /*
+ /*
* Once the operation completes, the Strobe bit of the command
* register will be reset. We poll for this particular condition
* We wait for a maximum of 500ms for the operation to complete,
@@ -926,7 +935,7 @@
time = 0;
while (TRUE) {
val64 = readq(&bar0->rti_command_mem);
- if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
+ if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) {
break;
}
if (time > 10) {
@@ -938,15 +947,15 @@
msleep(50);
}
- /*
- * Initializing proper values as Pause threshold into all
+ /*
+ * Initializing proper values as Pause threshold into all
* the 8 Queues on Rx side.
*/
writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
/* Disable RMAC PAD STRIPPING */
- add = &bar0->mac_cfg;
+ add = (void *) &bar0->mac_cfg;
val64 = readq(&bar0->mac_cfg);
val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
@@ -955,8 +964,8 @@
writel((u32) (val64 >> 32), (add + 4));
val64 = readq(&bar0->mac_cfg);
- /*
- * Set the time value to be inserted in the pause frame
+ /*
+ * Set the time value to be inserted in the pause frame
* generated by xena.
*/
val64 = readq(&bar0->rmac_pause_cfg);
@@ -964,7 +973,7 @@
val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
writeq(val64, &bar0->rmac_pause_cfg);
- /*
+ /*
* Set the Threshold Limit for Generating the pause frame
* If the amount of data in any Queue exceeds ratio of
* (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
@@ -988,8 +997,8 @@
}
writeq(val64, &bar0->mc_pause_thresh_q4q7);
- /*
- * TxDMA will stop Read request if the number of read split has
+ /*
+ * TxDMA will stop Read request if the number of read split has
* exceeded the limit pointed by shared_splits
*/
val64 = readq(&bar0->pic_control);
@@ -999,14 +1008,14 @@
return SUCCESS;
}
-/**
- * en_dis_able_nic_intrs - Enable or Disable the interrupts
+/**
+ * en_dis_able_nic_intrs - Enable or Disable the interrupts
* @nic: device private variable,
* @mask: A mask indicating which Intr block must be modified and,
* @flag: A flag indicating whether to enable or disable the Intrs.
* Description: This function will either disable or enable the interrupts
- * depending on the flag argument. The mask argument can be used to
- * enable/disable any Intr block.
+ * depending on the flag argument. The mask argument can be used to
+ * enable/disable any Intr block.
* Return Value: NONE.
*/
@@ -1024,20 +1033,20 @@
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
+ /*
* Disabled all PCIX, Flash, MDIO, IIC and GPIO
- * interrupts for now.
- * TODO
+ * interrupts for now.
+ * TODO
*/
writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
- /*
+ /*
* No MSI Support is available presently, so TTI and
* RTI interrupts are also disabled.
*/
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable PIC Intrs in the general
- * intr mask register
+ /*
+ * Disable PIC Intrs in the general
+ * intr mask register
*/
writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
temp64 = readq(&bar0->general_int_mask);
@@ -1055,27 +1064,27 @@
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
- * Keep all interrupts other than PFC interrupt
+ /*
+ * Keep all interrupts other than PFC interrupt
* and PCC interrupt disabled in DMA level.
*/
val64 = DISABLE_ALL_INTRS & ~(TXDMA_PFC_INT_M |
TXDMA_PCC_INT_M);
writeq(val64, &bar0->txdma_int_mask);
- /*
- * Enable only the MISC error 1 interrupt in PFC block
+ /*
+ * Enable only the MISC error 1 interrupt in PFC block
*/
val64 = DISABLE_ALL_INTRS & (~PFC_MISC_ERR_1);
writeq(val64, &bar0->pfc_err_mask);
- /*
- * Enable only the FB_ECC error interrupt in PCC block
+ /*
+ * Enable only the FB_ECC error interrupt in PCC block
*/
val64 = DISABLE_ALL_INTRS & (~PCC_FB_ECC_ERR);
writeq(val64, &bar0->pcc_err_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable TxDMA Intrs in the general intr mask
- * register
+ /*
+ * Disable TxDMA Intrs in the general intr mask
+ * register
*/
writeq(DISABLE_ALL_INTRS, &bar0->txdma_int_mask);
writeq(DISABLE_ALL_INTRS, &bar0->pfc_err_mask);
@@ -1093,15 +1102,15 @@
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
- * All RxDMA block interrupts are disabled for now
- * TODO
+ /*
+ * All RxDMA block interrupts are disabled for now
+ * TODO
*/
writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable RxDMA Intrs in the general intr mask
- * register
+ /*
+ * Disable RxDMA Intrs in the general intr mask
+ * register
*/
writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
temp64 = readq(&bar0->general_int_mask);
@@ -1118,8 +1127,8 @@
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
- * All MAC block error interrupts are disabled for now
+ /*
+ * All MAC block error interrupts are disabled for now
* except the link status change interrupt.
* TODO
*/
@@ -1132,8 +1141,8 @@
val64 &= ~((u64) RMAC_LINK_STATE_CHANGE_INT);
writeq(val64, &bar0->mac_rmac_err_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable MAC Intrs in the general intr mask register
+ /*
+ * Disable MAC Intrs in the general intr mask register
*/
writeq(DISABLE_ALL_INTRS, &bar0->mac_int_mask);
writeq(DISABLE_ALL_INTRS,
@@ -1152,14 +1161,14 @@
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
+ /*
* All XGXS block error interrupts are disabled for now
- * TODO
+ * TODO
*/
writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable MC Intrs in the general intr mask register
+ /*
+ * Disable MC Intrs in the general intr mask register
*/
writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
temp64 = readq(&bar0->general_int_mask);
@@ -1175,9 +1184,9 @@
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
- * All MC block error interrupts are disabled for now
- * TODO
+ /*
+ * All MC block error interrupts are disabled for now.
+ * TODO
*/
writeq(DISABLE_ALL_INTRS, &bar0->mc_int_mask);
} else if (flag == DISABLE_INTRS) {
@@ -1199,14 +1208,14 @@
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
writeq(temp64, &bar0->general_int_mask);
- /*
+ /*
* Enable all the Tx side interrupts
- * writing 0 Enables all 64 TX interrupt levels
+ * writing 0 Enables all 64 TX interrupt levels
*/
writeq(0x0, &bar0->tx_traffic_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable Tx Traffic Intrs in the general intr mask
+ /*
+ * Disable Tx Traffic Intrs in the general intr mask
* register.
*/
writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
@@ -1226,8 +1235,8 @@
/* writing 0 Enables all 8 RX interrupt levels */
writeq(0x0, &bar0->rx_traffic_mask);
} else if (flag == DISABLE_INTRS) {
- /*
- * Disable Rx Traffic Intrs in the general intr mask
+ /*
+ * Disable Rx Traffic Intrs in the general intr mask
* register.
*/
writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
@@ -1238,20 +1247,42 @@
}
}
-/**
- * verify_xena_quiescence - Checks whether the H/W is ready
+static int check_prc_pcc_state(u64 val64, int flag)
+{
+ int ret = 0;
+
+ if (flag == FALSE) {
+ if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
+ ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+ ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
+ ret = 1;
+ }
+ } else {
+ if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
+ ADAPTER_STATUS_RMAC_PCC_IDLE) &&
+ (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
+ ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+ ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
+ ret = 1;
+ }
+ }
+
+ return ret;
+}
+/**
+ * verify_xena_quiescence - Checks whether the H/W is ready
* @val64 : Value read from adapter status register.
* @flag : indicates if the adapter enable bit was ever written once
* before.
* Description: Returns whether the H/W is ready to go or not. Depending
- * on whether adapter enable bit was written or not the comparison
+ * on whether adapter enable bit was written or not the comparison
* differs and the calling function passes the input argument flag to
* indicate this.
- * Return: 1 If xena is quiescence
+ * Return: 1 If xena is quiescence
* 0 If Xena is not quiescence
*/
-static int verify_xena_quiescence(u64 val64, int flag)
+static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag)
{
int ret = 0;
u64 tmp64 = ~((u64) val64);
@@ -1263,25 +1294,7 @@
ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY |
ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK |
ADAPTER_STATUS_P_PLL_LOCK))) {
- if (flag == FALSE) {
- if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
- ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
- ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
-
- ret = 1;
-
- }
- } else {
- if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
- ADAPTER_STATUS_RMAC_PCC_IDLE) &&
- (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
- ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
- ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
-
- ret = 1;
-
- }
- }
+ ret = check_prc_pcc_state(val64, flag);
}
return ret;
@@ -1290,12 +1303,12 @@
/**
* fix_mac_address - Fix for Mac addr problem on Alpha platforms
* @sp: Pointer to device specifc structure
- * Description :
+ * Description :
* New procedure to clear mac address reading problems on Alpha platforms
*
*/
-static void fix_mac_address(nic_t * sp)
+void fix_mac_address(nic_t * sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64;
@@ -1303,20 +1316,21 @@
while (fix_mac[i] != END_SIGN) {
writeq(fix_mac[i++], &bar0->gpio_control);
+ udelay(10);
val64 = readq(&bar0->gpio_control);
}
}
/**
- * start_nic - Turns the device on
+ * start_nic - Turns the device on
* @nic : device private variable.
- * Description:
- * This function actually turns the device on. Before this function is
- * called,all Registers are configured from their reset states
- * and shared memory is allocated but the NIC is still quiescent. On
+ * Description:
+ * This function actually turns the device on. Before this function is
+ * called,all Registers are configured from their reset states
+ * and shared memory is allocated but the NIC is still quiescent. On
* calling this function, the device interrupts are cleared and the NIC is
* literally switched on by writing into the adapter control register.
- * Return Value:
+ * Return Value:
* SUCCESS on success and -1 on failure.
*/
@@ -1325,8 +1339,8 @@
XENA_dev_config_t __iomem *bar0 = nic->bar0;
struct net_device *dev = nic->dev;
register u64 val64 = 0;
- u16 interruptible, i;
- u16 subid;
+ u16 interruptible;
+ u16 subid, i;
mac_info_t *mac_control;
struct config_param *config;
@@ -1335,7 +1349,7 @@
/* PRC Initialization and configuration */
for (i = 0; i < config->rx_ring_num; i++) {
- writeq((u64) nic->rx_blocks[i][0].block_dma_addr,
+ writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
&bar0->prc_rxd0_n[i]);
val64 = readq(&bar0->prc_ctrl_n[i]);
@@ -1354,7 +1368,7 @@
writeq(val64, &bar0->rx_pa_cfg);
#endif
- /*
+ /*
* Enabling MC-RLDRAM. After enabling the device, we timeout
* for around 100ms, which is approximately the time required
* for the device to be ready for operation.
@@ -1364,27 +1378,27 @@
SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
val64 = readq(&bar0->mc_rldram_mrs);
- msleep(100); /* Delay by around 100 ms. */
+ msleep(100); /* Delay by around 100 ms. */
/* Enabling ECC Protection. */
val64 = readq(&bar0->adapter_control);
val64 &= ~ADAPTER_ECC_EN;
writeq(val64, &bar0->adapter_control);
- /*
- * Clearing any possible Link state change interrupts that
+ /*
+ * Clearing any possible Link state change interrupts that
* could have popped up just before Enabling the card.
*/
val64 = readq(&bar0->mac_rmac_err_reg);
if (val64)
writeq(val64, &bar0->mac_rmac_err_reg);
- /*
- * Verify if the device is ready to be enabled, if so enable
+ /*
+ * Verify if the device is ready to be enabled, if so enable
* it.
*/
val64 = readq(&bar0->adapter_status);
- if (!verify_xena_quiescence(val64, nic->device_enabled_once)) {
+ if (!verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
(unsigned long long) val64);
@@ -1396,12 +1410,12 @@
RX_MAC_INTR;
en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
- /*
+ /*
* With some switches, link might be already up at this point.
- * Because of this weird behavior, when we enable laser,
- * we may not get link. We need to handle this. We cannot
- * figure out which switch is misbehaving. So we are forced to
- * make a global change.
+ * Because of this weird behavior, when we enable laser,
+ * we may not get link. We need to handle this. We cannot
+ * figure out which switch is misbehaving. So we are forced to
+ * make a global change.
*/
/* Enabling Laser. */
@@ -1416,17 +1430,17 @@
val64 |= 0x0000800000000000ULL;
writeq(val64, &bar0->gpio_control);
val64 = 0x0411040400000000ULL;
- writeq(val64, (void __iomem *) bar0 + 0x2700);
+ writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
}
- /*
- * Don't see link state interrupts on certain switches, so
+ /*
+ * Don't see link state interrupts on certain switches, so
* directly scheduling a link state task from here.
*/
schedule_work(&nic->set_link_task);
- /*
- * Here we are performing soft reset on XGXS to
+ /*
+ * Here we are performing soft reset on XGXS to
* force link down. Since link is already up, we will get
* link state change interrupt after this reset
*/
@@ -1443,12 +1457,12 @@
return SUCCESS;
}
-/**
- * free_tx_buffers - Free all queued Tx buffers
+/**
+ * free_tx_buffers - Free all queued Tx buffers
* @nic : device private variable.
- * Description:
+ * Description:
* Free all queued Tx buffers.
- * Return Value: void
+ * Return Value: void
*/
static void free_tx_buffers(struct s2io_nic *nic)
@@ -1466,7 +1480,7 @@
for (i = 0; i < config->tx_fifo_num; i++) {
for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
- txdp = (TxD_t *) nic->list_info[i][j].
+ txdp = (TxD_t *) mac_control->fifos[i].list_info[j].
list_virt_addr;
skb =
(struct sk_buff *) ((unsigned long) txdp->
@@ -1482,16 +1496,16 @@
DBG_PRINT(INTR_DBG,
"%s:forcibly freeing %d skbs on FIFO%d\n",
dev->name, cnt, i);
- mac_control->tx_curr_get_info[i].offset = 0;
- mac_control->tx_curr_put_info[i].offset = 0;
+ mac_control->fifos[i].tx_curr_get_info.offset = 0;
+ mac_control->fifos[i].tx_curr_put_info.offset = 0;
}
}
-/**
- * stop_nic - To stop the nic
+/**
+ * stop_nic - To stop the nic
* @nic ; device private variable.
- * Description:
- * This function does exactly the opposite of what the start_nic()
+ * Description:
+ * This function does exactly the opposite of what the start_nic()
* function does. This function is called to stop the device.
* Return Value:
* void.
@@ -1521,11 +1535,11 @@
}
}
-/**
- * fill_rx_buffers - Allocates the Rx side skbs
+/**
+ * fill_rx_buffers - Allocates the Rx side skbs
* @nic: device private variable
- * @ring_no: ring number
- * Description:
+ * @ring_no: ring number
+ * Description:
* The function allocates Rx side skbs and puts the physical
* address of these buffers into the RxD buffer pointers, so that the NIC
* can DMA the received frame into these locations.
@@ -1533,8 +1547,8 @@
* 1. single buffer,
* 2. three buffer and
* 3. Five buffer modes.
- * Each mode defines how many fragments the received frame will be split
- * up into by the NIC. The frame is split into L3 header, L4 Header,
+ * Each mode defines how many fragments the received frame will be split
+ * up into by the NIC. The frame is split into L3 header, L4 Header,
* L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
* is split into 3 fragments. As of now only single buffer mode is
* supported.
@@ -1542,7 +1556,7 @@
* SUCCESS on success or an appropriate -ve value on failure.
*/
-static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
+int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
{
struct net_device *dev = nic->dev;
struct sk_buff *skb;
@@ -1550,14 +1564,13 @@
int off, off1, size, block_no, block_no1;
int offset, offset1;
u32 alloc_tab = 0;
- u32 alloc_cnt = nic->pkt_cnt[ring_no] -
- atomic_read(&nic->rx_bufs_left[ring_no]);
+ u32 alloc_cnt;
mac_info_t *mac_control;
struct config_param *config;
#ifdef CONFIG_2BUFF_MODE
RxD_t *rxdpnext;
int nextblk;
- unsigned long tmp;
+ u64 tmp;
buffAdd_t *ba;
dma_addr_t rxdpphys;
#endif
@@ -1567,17 +1580,18 @@
mac_control = &nic->mac_control;
config = &nic->config;
-
+ alloc_cnt = mac_control->rings[ring_no].pkt_cnt -
+ atomic_read(&nic->rx_bufs_left[ring_no]);
size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
while (alloc_tab < alloc_cnt) {
- block_no = mac_control->rx_curr_put_info[ring_no].
+ block_no = mac_control->rings[ring_no].rx_curr_put_info.
block_index;
- block_no1 = mac_control->rx_curr_get_info[ring_no].
+ block_no1 = mac_control->rings[ring_no].rx_curr_get_info.
block_index;
- off = mac_control->rx_curr_put_info[ring_no].offset;
- off1 = mac_control->rx_curr_get_info[ring_no].offset;
+ off = mac_control->rings[ring_no].rx_curr_put_info.offset;
+ off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
#ifndef CONFIG_2BUFF_MODE
offset = block_no * (MAX_RXDS_PER_BLOCK + 1) + off;
offset1 = block_no1 * (MAX_RXDS_PER_BLOCK + 1) + off1;
@@ -1586,7 +1600,7 @@
offset1 = block_no1 * (MAX_RXDS_PER_BLOCK) + off1;
#endif
- rxdp = nic->rx_blocks[ring_no][block_no].
+ rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
block_virt_addr + off;
if ((offset == offset1) && (rxdp->Host_Control)) {
DBG_PRINT(INTR_DBG, "%s: Get and Put", dev->name);
@@ -1595,15 +1609,15 @@
}
#ifndef CONFIG_2BUFF_MODE
if (rxdp->Control_1 == END_OF_BLOCK) {
- mac_control->rx_curr_put_info[ring_no].
+ mac_control->rings[ring_no].rx_curr_put_info.
block_index++;
- mac_control->rx_curr_put_info[ring_no].
- block_index %= nic->block_count[ring_no];
- block_no = mac_control->rx_curr_put_info
- [ring_no].block_index;
+ mac_control->rings[ring_no].rx_curr_put_info.
+ block_index %= mac_control->rings[ring_no].block_count;
+ block_no = mac_control->rings[ring_no].rx_curr_put_info.
+ block_index;
off++;
off %= (MAX_RXDS_PER_BLOCK + 1);
- mac_control->rx_curr_put_info[ring_no].offset =
+ mac_control->rings[ring_no].rx_curr_put_info.offset =
off;
rxdp = (RxD_t *) ((unsigned long) rxdp->Control_2);
DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
@@ -1611,30 +1625,30 @@
}
#ifndef CONFIG_S2IO_NAPI
spin_lock_irqsave(&nic->put_lock, flags);
- nic->put_pos[ring_no] =
+ mac_control->rings[ring_no].put_pos =
(block_no * (MAX_RXDS_PER_BLOCK + 1)) + off;
spin_unlock_irqrestore(&nic->put_lock, flags);
#endif
#else
if (rxdp->Host_Control == END_OF_BLOCK) {
- mac_control->rx_curr_put_info[ring_no].
+ mac_control->rings[ring_no].rx_curr_put_info.
block_index++;
- mac_control->rx_curr_put_info[ring_no].
- block_index %= nic->block_count[ring_no];
- block_no = mac_control->rx_curr_put_info
- [ring_no].block_index;
+ mac_control->rings[ring_no].rx_curr_put_info.block_index
+ %= mac_control->rings[ring_no].block_count;
+ block_no = mac_control->rings[ring_no].rx_curr_put_info
+ .block_index;
off = 0;
DBG_PRINT(INTR_DBG, "%s: block%d at: 0x%llx\n",
dev->name, block_no,
(unsigned long long) rxdp->Control_1);
- mac_control->rx_curr_put_info[ring_no].offset =
+ mac_control->rings[ring_no].rx_curr_put_info.offset =
off;
- rxdp = nic->rx_blocks[ring_no][block_no].
+ rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
block_virt_addr;
}
#ifndef CONFIG_S2IO_NAPI
spin_lock_irqsave(&nic->put_lock, flags);
- nic->put_pos[ring_no] = (block_no *
+ mac_control->rings[ring_no].put_pos = (block_no *
(MAX_RXDS_PER_BLOCK + 1)) + off;
spin_unlock_irqrestore(&nic->put_lock, flags);
#endif
@@ -1646,27 +1660,27 @@
if (rxdp->Control_2 & BIT(0))
#endif
{
- mac_control->rx_curr_put_info[ring_no].
+ mac_control->rings[ring_no].rx_curr_put_info.
offset = off;
goto end;
}
#ifdef CONFIG_2BUFF_MODE
- /*
- * RxDs Spanning cache lines will be replenished only
- * if the succeeding RxD is also owned by Host. It
- * will always be the ((8*i)+3) and ((8*i)+6)
- * descriptors for the 48 byte descriptor. The offending
+ /*
+ * RxDs Spanning cache lines will be replenished only
+ * if the succeeding RxD is also owned by Host. It
+ * will always be the ((8*i)+3) and ((8*i)+6)
+ * descriptors for the 48 byte descriptor. The offending
* decsriptor is of-course the 3rd descriptor.
*/
- rxdpphys = nic->rx_blocks[ring_no][block_no].
+ rxdpphys = mac_control->rings[ring_no].rx_blocks[block_no].
block_dma_addr + (off * sizeof(RxD_t));
if (((u64) (rxdpphys)) % 128 > 80) {
- rxdpnext = nic->rx_blocks[ring_no][block_no].
+ rxdpnext = mac_control->rings[ring_no].rx_blocks[block_no].
block_virt_addr + (off + 1);
if (rxdpnext->Host_Control == END_OF_BLOCK) {
nextblk = (block_no + 1) %
- (nic->block_count[ring_no]);
- rxdpnext = nic->rx_blocks[ring_no]
+ (mac_control->rings[ring_no].block_count);
+ rxdpnext = mac_control->rings[ring_no].rx_blocks
[nextblk].block_virt_addr;
}
if (rxdpnext->Control_2 & BIT(0))
@@ -1695,9 +1709,9 @@
rxdp->Control_1 |= RXD_OWN_XENA;
off++;
off %= (MAX_RXDS_PER_BLOCK + 1);
- mac_control->rx_curr_put_info[ring_no].offset = off;
+ mac_control->rings[ring_no].rx_curr_put_info.offset = off;
#else
- ba = &nic->ba[ring_no][block_no][off];
+ ba = &mac_control->rings[ring_no].ba[block_no][off];
skb_reserve(skb, BUF0_LEN);
tmp = ((unsigned long) skb->data & ALIGN_SIZE);
if (tmp)
@@ -1721,8 +1735,9 @@
rxdp->Host_Control = (u64) ((unsigned long) (skb));
rxdp->Control_1 |= RXD_OWN_XENA;
off++;
- mac_control->rx_curr_put_info[ring_no].offset = off;
+ mac_control->rings[ring_no].rx_curr_put_info.offset = off;
#endif
+
atomic_inc(&nic->rx_bufs_left[ring_no]);
alloc_tab++;
}
@@ -1732,9 +1747,9 @@
}
/**
- * free_rx_buffers - Frees all Rx buffers
+ * free_rx_buffers - Frees all Rx buffers
* @sp: device private variable.
- * Description:
+ * Description:
* This function will free all Rx buffers allocated by host.
* Return Value:
* NONE.
@@ -1758,7 +1773,8 @@
for (i = 0; i < config->rx_ring_num; i++) {
for (j = 0, blk = 0; j < config->rx_cfg[i].num_rxd; j++) {
off = j % (MAX_RXDS_PER_BLOCK + 1);
- rxdp = sp->rx_blocks[i][blk].block_virt_addr + off;
+ rxdp = mac_control->rings[i].rx_blocks[blk].
+ block_virt_addr + off;
#ifndef CONFIG_2BUFF_MODE
if (rxdp->Control_1 == END_OF_BLOCK) {
@@ -1793,7 +1809,7 @@
HEADER_SNAP_SIZE,
PCI_DMA_FROMDEVICE);
#else
- ba = &sp->ba[i][blk][off];
+ ba = &mac_control->rings[i].ba[blk][off];
pci_unmap_single(sp->pdev, (dma_addr_t)
rxdp->Buffer0_ptr,
BUF0_LEN,
@@ -1813,10 +1829,10 @@
}
memset(rxdp, 0, sizeof(RxD_t));
}
- mac_control->rx_curr_put_info[i].block_index = 0;
- mac_control->rx_curr_get_info[i].block_index = 0;
- mac_control->rx_curr_put_info[i].offset = 0;
- mac_control->rx_curr_get_info[i].offset = 0;
+ mac_control->rings[i].rx_curr_put_info.block_index = 0;
+ mac_control->rings[i].rx_curr_get_info.block_index = 0;
+ mac_control->rings[i].rx_curr_put_info.offset = 0;
+ mac_control->rings[i].rx_curr_get_info.offset = 0;
atomic_set(&sp->rx_bufs_left[i], 0);
DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
dev->name, buf_cnt, i);
@@ -1826,7 +1842,7 @@
/**
* s2io_poll - Rx interrupt handler for NAPI support
* @dev : pointer to the device structure.
- * @budget : The number of packets that were budgeted to be processed
+ * @budget : The number of packets that were budgeted to be processed
* during one pass through the 'Poll" function.
* Description:
* Comes into picture only if NAPI support has been incorporated. It does
@@ -1836,160 +1852,35 @@
* 0 on success and 1 if there are No Rx packets to be processed.
*/
-#ifdef CONFIG_S2IO_NAPI
+#if defined(CONFIG_S2IO_NAPI)
static int s2io_poll(struct net_device *dev, int *budget)
{
nic_t *nic = dev->priv;
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
- int pkts_to_process = *budget, pkt_cnt = 0;
- register u64 val64 = 0;
- rx_curr_get_info_t get_info, put_info;
- int i, get_block, put_block, get_offset, put_offset, ring_bufs;
-#ifndef CONFIG_2BUFF_MODE
- u16 val16, cksum;
-#endif
- struct sk_buff *skb;
- RxD_t *rxdp;
+ int pkt_cnt = 0, org_pkts_to_process;
mac_info_t *mac_control;
struct config_param *config;
-#ifdef CONFIG_2BUFF_MODE
- buffAdd_t *ba;
-#endif
+ XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ u64 val64;
+ int i;
mac_control = &nic->mac_control;
config = &nic->config;
- if (pkts_to_process > dev->quota)
- pkts_to_process = dev->quota;
+ nic->pkts_to_process = *budget;
+ if (nic->pkts_to_process > dev->quota)
+ nic->pkts_to_process = dev->quota;
+ org_pkts_to_process = nic->pkts_to_process;
val64 = readq(&bar0->rx_traffic_int);
writeq(val64, &bar0->rx_traffic_int);
for (i = 0; i < config->rx_ring_num; i++) {
- get_info = mac_control->rx_curr_get_info[i];
- get_block = get_info.block_index;
- put_info = mac_control->rx_curr_put_info[i];
- put_block = put_info.block_index;
- ring_bufs = config->rx_cfg[i].num_rxd;
- rxdp = nic->rx_blocks[i][get_block].block_virt_addr +
- get_info.offset;
-#ifndef CONFIG_2BUFF_MODE
- get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
- put_info.offset;
- while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
- (((get_offset + 1) % ring_bufs) != put_offset)) {
- if (--pkts_to_process < 0) {
- goto no_rx;
- }
- if (rxdp->Control_1 == END_OF_BLOCK) {
- rxdp =
- (RxD_t *) ((unsigned long) rxdp->
- Control_2);
- get_info.offset++;
- get_info.offset %=
- (MAX_RXDS_PER_BLOCK + 1);
- get_block++;
- get_block %= nic->block_count[i];
- mac_control->rx_curr_get_info[i].
- offset = get_info.offset;
- mac_control->rx_curr_get_info[i].
- block_index = get_block;
- continue;
- }
- get_offset =
- (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- skb =
- (struct sk_buff *) ((unsigned long) rxdp->
- Host_Control);
- if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: The skb is ",
- dev->name);
- DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- goto no_rx;
- }
- val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
- val16 = (u16) (val64 >> 48);
- cksum = RXD_GET_L4_CKSUM(rxdp->Control_1);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
- dev->mtu +
- HEADER_ETHERNET_II_802_3_SIZE +
- HEADER_802_2_SIZE +
- HEADER_SNAP_SIZE,
- PCI_DMA_FROMDEVICE);
- rx_osm_handler(nic, val16, rxdp, i);
- pkt_cnt++;
- get_info.offset++;
- get_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
- rxdp =
- nic->rx_blocks[i][get_block].block_virt_addr +
- get_info.offset;
- mac_control->rx_curr_get_info[i].offset =
- get_info.offset;
+ rx_intr_handler(&mac_control->rings[i]);
+ pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
+ if (!nic->pkts_to_process) {
+ /* Quota for the current iteration has been met */
+ goto no_rx;
}
-#else
- get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
- put_info.offset;
- while (((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
- !(rxdp->Control_2 & BIT(0))) &&
- (((get_offset + 1) % ring_bufs) != put_offset)) {
- if (--pkts_to_process < 0) {
- goto no_rx;
- }
- skb = (struct sk_buff *) ((unsigned long)
- rxdp->Host_Control);
- if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: The skb is ",
- dev->name);
- DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- goto no_rx;
- }
-
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
- BUF0_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer1_ptr,
- BUF1_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer2_ptr,
- dev->mtu + BUF0_LEN + 4,
- PCI_DMA_FROMDEVICE);
- ba = &nic->ba[i][get_block][get_info.offset];
-
- rx_osm_handler(nic, rxdp, i, ba);
-
- get_info.offset++;
- mac_control->rx_curr_get_info[i].offset =
- get_info.offset;
- rxdp =
- nic->rx_blocks[i][get_block].block_virt_addr +
- get_info.offset;
-
- if (get_info.offset &&
- (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
- get_info.offset = 0;
- mac_control->rx_curr_get_info[i].
- offset = get_info.offset;
- get_block++;
- get_block %= nic->block_count[i];
- mac_control->rx_curr_get_info[i].
- block_index = get_block;
- rxdp =
- nic->rx_blocks[i][get_block].
- block_virt_addr;
- }
- get_offset =
- (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- pkt_cnt++;
- }
-#endif
}
if (!pkt_cnt)
pkt_cnt = 1;
@@ -2009,7 +1900,7 @@
en_dis_able_nic_intrs(nic, RX_TRAFFIC_INTR, ENABLE_INTRS);
return 0;
- no_rx:
+no_rx:
dev->quota -= pkt_cnt;
*budget -= pkt_cnt;
@@ -2022,277 +1913,213 @@
}
return 1;
}
-#else
-/**
+#endif
+
+/**
* rx_intr_handler - Rx interrupt handler
* @nic: device private variable.
- * Description:
- * If the interrupt is because of a received frame or if the
+ * Description:
+ * If the interrupt is because of a received frame or if the
* receive ring contains fresh as yet un-processed frames,this function is
- * called. It picks out the RxD at which place the last Rx processing had
- * stopped and sends the skb to the OSM's Rx handler and then increments
+ * called. It picks out the RxD at which place the last Rx processing had
+ * stopped and sends the skb to the OSM's Rx handler and then increments
* the offset.
* Return Value:
* NONE.
*/
-
-static void rx_intr_handler(struct s2io_nic *nic)
+static void rx_intr_handler(ring_info_t *ring_data)
{
+ nic_t *nic = ring_data->nic;
struct net_device *dev = (struct net_device *) nic->dev;
- XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+ XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ int get_block, get_offset, put_block, put_offset, ring_bufs;
rx_curr_get_info_t get_info, put_info;
RxD_t *rxdp;
struct sk_buff *skb;
-#ifndef CONFIG_2BUFF_MODE
- u16 val16, cksum;
+#ifndef CONFIG_S2IO_NAPI
+ int pkt_cnt = 0;
#endif
- register u64 val64 = 0;
- int get_block, get_offset, put_block, put_offset, ring_bufs;
- int i, pkt_cnt = 0;
- mac_info_t *mac_control;
- struct config_param *config;
-#ifdef CONFIG_2BUFF_MODE
- buffAdd_t *ba;
-#endif
+ register u64 val64;
- mac_control = &nic->mac_control;
- config = &nic->config;
-
- /*
- * rx_traffic_int reg is an R1 register, hence we read and write back
- * the samevalue in the register to clear it.
+ /*
+ * rx_traffic_int reg is an R1 register, hence we read and write
+ * back the same value in the register to clear it
*/
- val64 = readq(&bar0->rx_traffic_int);
- writeq(val64, &bar0->rx_traffic_int);
+ val64 = readq(&bar0->tx_traffic_int);
+ writeq(val64, &bar0->tx_traffic_int);
- for (i = 0; i < config->rx_ring_num; i++) {
- get_info = mac_control->rx_curr_get_info[i];
- get_block = get_info.block_index;
- put_info = mac_control->rx_curr_put_info[i];
- put_block = put_info.block_index;
- ring_bufs = config->rx_cfg[i].num_rxd;
- rxdp = nic->rx_blocks[i][get_block].block_virt_addr +
+ get_info = ring_data->rx_curr_get_info;
+ get_block = get_info.block_index;
+ put_info = ring_data->rx_curr_put_info;
+ put_block = put_info.block_index;
+ ring_bufs = get_info.ring_len+1;
+ rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
get_info.offset;
-#ifndef CONFIG_2BUFF_MODE
- get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- spin_lock(&nic->put_lock);
- put_offset = nic->put_pos[i];
- spin_unlock(&nic->put_lock);
- while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
- (((get_offset + 1) % ring_bufs) != put_offset)) {
- if (rxdp->Control_1 == END_OF_BLOCK) {
- rxdp = (RxD_t *) ((unsigned long)
- rxdp->Control_2);
- get_info.offset++;
- get_info.offset %=
- (MAX_RXDS_PER_BLOCK + 1);
- get_block++;
- get_block %= nic->block_count[i];
- mac_control->rx_curr_get_info[i].
- offset = get_info.offset;
- mac_control->rx_curr_get_info[i].
- block_index = get_block;
- continue;
- }
- get_offset =
- (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- skb = (struct sk_buff *) ((unsigned long)
- rxdp->Host_Control);
- if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: The skb is ",
- dev->name);
- DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- return;
- }
- val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
- val16 = (u16) (val64 >> 48);
- cksum = RXD_GET_L4_CKSUM(rxdp->Control_1);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
- dev->mtu +
- HEADER_ETHERNET_II_802_3_SIZE +
- HEADER_802_2_SIZE +
- HEADER_SNAP_SIZE,
- PCI_DMA_FROMDEVICE);
- rx_osm_handler(nic, val16, rxdp, i);
- get_info.offset++;
- get_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
- rxdp =
- nic->rx_blocks[i][get_block].block_virt_addr +
- get_info.offset;
- mac_control->rx_curr_get_info[i].offset =
- get_info.offset;
- pkt_cnt++;
- if ((indicate_max_pkts)
- && (pkt_cnt > indicate_max_pkts))
- break;
- }
+ get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ get_info.offset;
+#ifndef CONFIG_S2IO_NAPI
+ spin_lock(&nic->put_lock);
+ put_offset = ring_data->put_pos;
+ spin_unlock(&nic->put_lock);
#else
- get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- spin_lock(&nic->put_lock);
- put_offset = nic->put_pos[i];
- spin_unlock(&nic->put_lock);
- while (((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
- !(rxdp->Control_2 & BIT(0))) &&
- (((get_offset + 1) % ring_bufs) != put_offset)) {
- skb = (struct sk_buff *) ((unsigned long)
- rxdp->Host_Control);
- if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: The skb is ",
- dev->name);
- DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- return;
- }
-
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer0_ptr,
- BUF0_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer1_ptr,
- BUF1_LEN, PCI_DMA_FROMDEVICE);
- pci_unmap_single(nic->pdev, (dma_addr_t)
- rxdp->Buffer2_ptr,
- dev->mtu + BUF0_LEN + 4,
- PCI_DMA_FROMDEVICE);
- ba = &nic->ba[i][get_block][get_info.offset];
-
- rx_osm_handler(nic, rxdp, i, ba);
-
- get_info.offset++;
- mac_control->rx_curr_get_info[i].offset =
- get_info.offset;
- rxdp =
- nic->rx_blocks[i][get_block].block_virt_addr +
- get_info.offset;
-
- if (get_info.offset &&
- (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
- get_info.offset = 0;
- mac_control->rx_curr_get_info[i].
- offset = get_info.offset;
- get_block++;
- get_block %= nic->block_count[i];
- mac_control->rx_curr_get_info[i].
- block_index = get_block;
- rxdp =
- nic->rx_blocks[i][get_block].
- block_virt_addr;
- }
- get_offset =
- (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
- get_info.offset;
- pkt_cnt++;
- if ((indicate_max_pkts)
- && (pkt_cnt > indicate_max_pkts))
- break;
- }
+ put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ put_info.offset;
#endif
+ while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
+#ifdef CONFIG_2BUFF_MODE
+ (!rxdp->Control_2 & BIT(0)) &&
+#endif
+ (((get_offset + 1) % ring_bufs) != put_offset)) {
+ skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
+ if (skb == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: The skb is ",
+ dev->name);
+ DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
+ return;
+ }
+#ifndef CONFIG_2BUFF_MODE
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ rxdp->Buffer0_ptr,
+ dev->mtu +
+ HEADER_ETHERNET_II_802_3_SIZE +
+ HEADER_802_2_SIZE +
+ HEADER_SNAP_SIZE,
+ PCI_DMA_FROMDEVICE);
+#else
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ rxdp->Buffer0_ptr,
+ BUF0_LEN, PCI_DMA_FROMDEVICE);
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ rxdp->Buffer1_ptr,
+ BUF1_LEN, PCI_DMA_FROMDEVICE);
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ rxdp->Buffer2_ptr,
+ dev->mtu + BUF0_LEN + 4,
+ PCI_DMA_FROMDEVICE);
+#endif
+ rx_osm_handler(ring_data, rxdp);
+ get_info.offset++;
+ ring_data->rx_curr_get_info.offset =
+ get_info.offset;
+ rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
+ get_info.offset;
+ if (get_info.offset &&
+ (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
+ get_info.offset = 0;
+ ring_data->rx_curr_get_info.offset
+ = get_info.offset;
+ get_block++;
+ get_block %= ring_data->block_count;
+ ring_data->rx_curr_get_info.block_index
+ = get_block;
+ rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
+ }
+
+ get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+ get_info.offset;
+#ifdef CONFIG_S2IO_NAPI
+ nic->pkts_to_process -= 1;
+ if (!nic->pkts_to_process)
+ break;
+#else
+ pkt_cnt++;
if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
break;
+#endif
}
}
-#endif
-/**
+
+/**
* tx_intr_handler - Transmit interrupt handler
* @nic : device private variable
- * Description:
- * If an interrupt was raised to indicate DMA complete of the
- * Tx packet, this function is called. It identifies the last TxD
- * whose buffer was freed and frees all skbs whose data have already
+ * Description:
+ * If an interrupt was raised to indicate DMA complete of the
+ * Tx packet, this function is called. It identifies the last TxD
+ * whose buffer was freed and frees all skbs whose data have already
* DMA'ed into the NICs internal memory.
* Return Value:
* NONE
*/
-static void tx_intr_handler(struct s2io_nic *nic)
+static void tx_intr_handler(fifo_info_t *fifo_data)
{
+ nic_t *nic = fifo_data->nic;
XENA_dev_config_t __iomem *bar0 = nic->bar0;
struct net_device *dev = (struct net_device *) nic->dev;
tx_curr_get_info_t get_info, put_info;
struct sk_buff *skb;
TxD_t *txdlp;
- register u64 val64 = 0;
- int i;
u16 j, frg_cnt;
- mac_info_t *mac_control;
- struct config_param *config;
+ register u64 val64 = 0;
- mac_control = &nic->mac_control;
- config = &nic->config;
-
- /*
- * tx_traffic_int reg is an R1 register, hence we read and write
- * back the samevalue in the register to clear it.
+ /*
+ * tx_traffic_int reg is an R1 register, hence we read and write
+ * back the same value in the register to clear it
*/
val64 = readq(&bar0->tx_traffic_int);
writeq(val64, &bar0->tx_traffic_int);
- for (i = 0; i < config->tx_fifo_num; i++) {
- get_info = mac_control->tx_curr_get_info[i];
- put_info = mac_control->tx_curr_put_info[i];
- txdlp = (TxD_t *) nic->list_info[i][get_info.offset].
- list_virt_addr;
- while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
- (get_info.offset != put_info.offset) &&
- (txdlp->Host_Control)) {
- /* Check for TxD errors */
- if (txdlp->Control_1 & TXD_T_CODE) {
- unsigned long long err;
- err = txdlp->Control_1 & TXD_T_CODE;
- DBG_PRINT(ERR_DBG, "***TxD error %llx\n",
- err);
- }
-
- skb = (struct sk_buff *) ((unsigned long)
- txdlp->Host_Control);
- if (skb == NULL) {
- DBG_PRINT(ERR_DBG, "%s: Null skb ",
- dev->name);
- DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
- return;
- }
- nic->tx_pkt_count++;
-
- frg_cnt = skb_shinfo(skb)->nr_frags;
-
- /* For unfragmented skb */
- pci_unmap_single(nic->pdev, (dma_addr_t)
- txdlp->Buffer_Pointer,
- skb->len - skb->data_len,
- PCI_DMA_TODEVICE);
- if (frg_cnt) {
- TxD_t *temp = txdlp;
- txdlp++;
- for (j = 0; j < frg_cnt; j++, txdlp++) {
- skb_frag_t *frag =
- &skb_shinfo(skb)->frags[j];
- pci_unmap_page(nic->pdev,
- (dma_addr_t)
- txdlp->
- Buffer_Pointer,
- frag->size,
- PCI_DMA_TODEVICE);
- }
- txdlp = temp;
- }
- memset(txdlp, 0,
- (sizeof(TxD_t) * config->max_txds));
-
- /* Updating the statistics block */
- nic->stats.tx_packets++;
- nic->stats.tx_bytes += skb->len;
- dev_kfree_skb_irq(skb);
-
- get_info.offset++;
- get_info.offset %= get_info.fifo_len + 1;
- txdlp = (TxD_t *) nic->list_info[i]
- [get_info.offset].list_virt_addr;
- mac_control->tx_curr_get_info[i].offset =
- get_info.offset;
+ get_info = fifo_data->tx_curr_get_info;
+ put_info = fifo_data->tx_curr_put_info;
+ txdlp = (TxD_t *) fifo_data->list_info[get_info.offset].
+ list_virt_addr;
+ while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
+ (get_info.offset != put_info.offset) &&
+ (txdlp->Host_Control)) {
+ /* Check for TxD errors */
+ if (txdlp->Control_1 & TXD_T_CODE) {
+ unsigned long long err;
+ err = txdlp->Control_1 & TXD_T_CODE;
+ DBG_PRINT(ERR_DBG, "***TxD error %llx\n",
+ err);
}
+
+ skb = (struct sk_buff *) ((unsigned long)
+ txdlp->Host_Control);
+ if (skb == NULL) {
+ DBG_PRINT(ERR_DBG, "%s: Null skb ",
+ __FUNCTION__);
+ DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
+ return;
+ }
+
+ frg_cnt = skb_shinfo(skb)->nr_frags;
+ nic->tx_pkt_count++;
+
+ pci_unmap_single(nic->pdev, (dma_addr_t)
+ txdlp->Buffer_Pointer,
+ skb->len - skb->data_len,
+ PCI_DMA_TODEVICE);
+ if (frg_cnt) {
+ TxD_t *temp;
+ temp = txdlp;
+ txdlp++;
+ for (j = 0; j < frg_cnt; j++, txdlp++) {
+ skb_frag_t *frag =
+ &skb_shinfo(skb)->frags[j];
+ pci_unmap_page(nic->pdev,
+ (dma_addr_t)
+ txdlp->
+ Buffer_Pointer,
+ frag->size,
+ PCI_DMA_TODEVICE);
+ }
+ txdlp = temp;
+ }
+ memset(txdlp, 0,
+ (sizeof(TxD_t) * fifo_data->max_txds));
+
+ /* Updating the statistics block */
+ nic->stats.tx_packets++;
+ nic->stats.tx_bytes += skb->len;
+ dev_kfree_skb_irq(skb);
+
+ get_info.offset++;
+ get_info.offset %= get_info.fifo_len + 1;
+ txdlp = (TxD_t *) fifo_data->list_info
+ [get_info.offset].list_virt_addr;
+ fifo_data->tx_curr_get_info.offset =
+ get_info.offset;
}
spin_lock(&nic->tx_lock);
@@ -2301,13 +2128,13 @@
spin_unlock(&nic->tx_lock);
}
-/**
+/**
* alarm_intr_handler - Alarm Interrrupt handler
* @nic: device private variable
- * Description: If the interrupt was neither because of Rx packet or Tx
+ * Description: If the interrupt was neither because of Rx packet or Tx
* complete, this function is called. If the interrupt was to indicate
- * a loss of link, the OSM link status handler is invoked for any other
- * alarm interrupt the block that raised the interrupt is displayed
+ * a loss of link, the OSM link status handler is invoked for any other
+ * alarm interrupt the block that raised the interrupt is displayed
* and a H/W reset is issued.
* Return Value:
* NONE
@@ -2338,7 +2165,7 @@
/*
* Also as mentioned in the latest Errata sheets if the PCC_FB_ECC
* Error occurs, the adapter will be recycled by disabling the
- * adapter enable bit and enabling it again after the device
+ * adapter enable bit and enabling it again after the device
* becomes Quiescent.
*/
val64 = readq(&bar0->pcc_err_reg);
@@ -2354,18 +2181,18 @@
/* Other type of interrupts are not being handled now, TODO */
}
-/**
+/**
* wait_for_cmd_complete - waits for a command to complete.
- * @sp : private member of the device structure, which is a pointer to the
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * Description: Function that waits for a command to Write into RMAC
- * ADDR DATA registers to be completed and returns either success or
- * error depending on whether the command was complete or not.
+ * Description: Function that waits for a command to Write into RMAC
+ * ADDR DATA registers to be completed and returns either success or
+ * error depending on whether the command was complete or not.
* Return value:
* SUCCESS on success and FAILURE on failure.
*/
-static int wait_for_cmd_complete(nic_t * sp)
+int wait_for_cmd_complete(nic_t * sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
int ret = FAILURE, cnt = 0;
@@ -2385,17 +2212,17 @@
return ret;
}
-/**
- * s2io_reset - Resets the card.
+/**
+ * s2io_reset - Resets the card.
* @sp : private member of the device structure.
* Description: Function to Reset the card. This function then also
- * restores the previously saved PCI configuration space registers as
+ * restores the previously saved PCI configuration space registers as
* the card reset also resets the configuration space.
* Return value:
* void.
*/
-static void s2io_reset(nic_t * sp)
+void s2io_reset(nic_t * sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64;
@@ -2404,10 +2231,10 @@
val64 = SW_RESET_ALL;
writeq(val64, &bar0->sw_reset);
- /*
- * At this stage, if the PCI write is indeed completed, the
- * card is reset and so is the PCI Config space of the device.
- * So a read cannot be issued at this stage on any of the
+ /*
+ * At this stage, if the PCI write is indeed completed, the
+ * card is reset and so is the PCI Config space of the device.
+ * So a read cannot be issued at this stage on any of the
* registers to ensure the write into "sw_reset" register
* has gone through.
* Question: Is there any system call that will explicitly force
@@ -2420,10 +2247,17 @@
/* Restore the PCI state saved during initializarion. */
pci_restore_state(sp->pdev);
+
s2io_init_pci(sp);
msleep(250);
+ /* Set swapper to enable I/O register access */
+ s2io_set_swapper(sp);
+
+ /* Reset device statistics maintained by OS */
+ memset(&sp->stats, 0, sizeof (struct net_device_stats));
+
/* SXE-002: Configure link and activity LED to turn it off */
subid = sp->pdev->subsystem_device;
if ((subid & 0xFF) >= 0x07) {
@@ -2431,29 +2265,29 @@
val64 |= 0x0000800000000000ULL;
writeq(val64, &bar0->gpio_control);
val64 = 0x0411040400000000ULL;
- writeq(val64, (void __iomem *) bar0 + 0x2700);
+ writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
}
sp->device_enabled_once = FALSE;
}
/**
- * s2io_set_swapper - to set the swapper controle on the card
- * @sp : private member of the device structure,
+ * s2io_set_swapper - to set the swapper controle on the card
+ * @sp : private member of the device structure,
* pointer to the s2io_nic structure.
- * Description: Function to set the swapper control on the card
+ * Description: Function to set the swapper control on the card
* correctly depending on the 'endianness' of the system.
* Return value:
* SUCCESS on success and FAILURE on failure.
*/
-static int s2io_set_swapper(nic_t * sp)
+int s2io_set_swapper(nic_t * sp)
{
struct net_device *dev = sp->dev;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64, valt, valr;
- /*
+ /*
* Set proper endian settings and verify the same by reading
* the PIF Feed-back register.
*/
@@ -2505,8 +2339,9 @@
i++;
}
if(i == 4) {
+ unsigned long long x = val64;
DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
- DBG_PRINT(ERR_DBG, "reads:0x%llx\n",val64);
+ DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
return FAILURE;
}
}
@@ -2514,8 +2349,8 @@
val64 &= 0xFFFF000000000000ULL;
#ifdef __BIG_ENDIAN
- /*
- * The device by default set to a big endian format, so a
+ /*
+ * The device by default set to a big endian format, so a
* big endian driver need not set anything.
*/
val64 |= (SWAPPER_CTRL_TXP_FE |
@@ -2531,9 +2366,9 @@
SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
writeq(val64, &bar0->swapper_ctrl);
#else
- /*
+ /*
* Initially we enable all bits to make it accessible by the
- * driver, then we selectively enable only those bits that
+ * driver, then we selectively enable only those bits that
* we want to set.
*/
val64 |= (SWAPPER_CTRL_TXP_FE |
@@ -2555,8 +2390,8 @@
#endif
val64 = readq(&bar0->swapper_ctrl);
- /*
- * Verifying if endian settings are accurate by reading a
+ /*
+ * Verifying if endian settings are accurate by reading a
* feedback register.
*/
val64 = readq(&bar0->pif_rd_swapper_fb);
@@ -2576,25 +2411,25 @@
* Functions defined below concern the OS part of the driver *
* ********************************************************* */
-/**
+/**
* s2io_open - open entry point of the driver
* @dev : pointer to the device structure.
* Description:
* This function is the open entry point of the driver. It mainly calls a
* function to allocate Rx buffers and inserts them into the buffer
- * descriptors and then enables the Rx part of the NIC.
+ * descriptors and then enables the Rx part of the NIC.
* Return value:
* 0 on success and an appropriate (-)ve integer as defined in errno.h
* file on failure.
*/
-static int s2io_open(struct net_device *dev)
+int s2io_open(struct net_device *dev)
{
nic_t *sp = dev->priv;
int err = 0;
- /*
- * Make sure you have link off by default every time
+ /*
+ * Make sure you have link off by default every time
* Nic is initialized
*/
netif_carrier_off(dev);
@@ -2604,27 +2439,34 @@
if (s2io_card_up(sp)) {
DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
dev->name);
- return -ENODEV;
+ err = -ENODEV;
+ goto hw_init_failed;
}
/* After proper initialization of H/W, register ISR */
- err = request_irq((int) sp->irq, s2io_isr, SA_SHIRQ,
+ err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
sp->name, dev);
if (err) {
- s2io_reset(sp);
DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
dev->name);
- return err;
+ goto isr_registration_failed;
}
if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
- s2io_reset(sp);
- return -ENODEV;
+ err = -ENODEV;
+ goto setting_mac_address_failed;
}
netif_start_queue(dev);
return 0;
+
+setting_mac_address_failed:
+ free_irq(sp->pdev->irq, dev);
+isr_registration_failed:
+ s2io_reset(sp);
+hw_init_failed:
+ return err;
}
/**
@@ -2640,16 +2482,15 @@
* file on failure.
*/
-static int s2io_close(struct net_device *dev)
+int s2io_close(struct net_device *dev)
{
nic_t *sp = dev->priv;
-
flush_scheduled_work();
netif_stop_queue(dev);
/* Reset card, kill tasklet and free Tx and Rx buffers. */
s2io_card_down(sp);
- free_irq(dev->irq, dev);
+ free_irq(sp->pdev->irq, dev);
sp->device_close_flag = TRUE; /* Device is shut down. */
return 0;
}
@@ -2667,7 +2508,7 @@
* 0 on success & 1 on failure.
*/
-static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
+int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
{
nic_t *sp = dev->priv;
u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
@@ -2685,22 +2526,24 @@
mac_control = &sp->mac_control;
config = &sp->config;
- DBG_PRINT(TX_DBG, "%s: In S2IO Tx routine\n", dev->name);
+ DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
spin_lock_irqsave(&sp->tx_lock, flags);
-
if (atomic_read(&sp->card_state) == CARD_DOWN) {
- DBG_PRINT(ERR_DBG, "%s: Card going down for reset\n",
+ DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
dev->name);
spin_unlock_irqrestore(&sp->tx_lock, flags);
- return 1;
+ dev_kfree_skb(skb);
+ return 0;
}
queue = 0;
- put_off = (u16) mac_control->tx_curr_put_info[queue].offset;
- get_off = (u16) mac_control->tx_curr_get_info[queue].offset;
- txdp = (TxD_t *) sp->list_info[queue][put_off].list_virt_addr;
- queue_len = mac_control->tx_curr_put_info[queue].fifo_len + 1;
+ put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset;
+ get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset;
+ txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off].
+ list_virt_addr;
+
+ queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
/* Avoid "put" pointer going beyond "get" pointer */
if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) {
DBG_PRINT(ERR_DBG, "Error in xmit, No free TXDs.\n");
@@ -2720,9 +2563,9 @@
frg_cnt = skb_shinfo(skb)->nr_frags;
frg_len = skb->len - skb->data_len;
- txdp->Host_Control = (unsigned long) skb;
txdp->Buffer_Pointer = pci_map_single
(sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
+ txdp->Host_Control = (unsigned long) skb;
if (skb->ip_summed == CHECKSUM_HW) {
txdp->Control_2 |=
(TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
@@ -2747,11 +2590,12 @@
txdp->Control_1 |= TXD_GATHER_CODE_LAST;
tx_fifo = mac_control->tx_FIFO_start[queue];
- val64 = sp->list_info[queue][put_off].list_phy_addr;
+ val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr;
writeq(val64, &tx_fifo->TxDL_Pointer);
val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
TX_FIFO_LAST_LIST);
+
#ifdef NETIF_F_TSO
if (mss)
val64 |= TX_FIFO_SPECIAL_FUNC;
@@ -2762,8 +2606,8 @@
val64 = readq(&bar0->general_int_status);
put_off++;
- put_off %= mac_control->tx_curr_put_info[queue].fifo_len + 1;
- mac_control->tx_curr_put_info[queue].offset = put_off;
+ put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
+ mac_control->fifos[queue].tx_curr_put_info.offset = put_off;
/* Avoid "put" pointer going beyond "get" pointer */
if (((put_off + 1) % queue_len) == get_off) {
@@ -2784,13 +2628,13 @@
* @irq: the irq of the device.
* @dev_id: a void pointer to the dev structure of the NIC.
* @pt_regs: pointer to the registers pushed on the stack.
- * Description: This function is the ISR handler of the device. It
- * identifies the reason for the interrupt and calls the relevant
- * service routines. As a contongency measure, this ISR allocates the
+ * Description: This function is the ISR handler of the device. It
+ * identifies the reason for the interrupt and calls the relevant
+ * service routines. As a contongency measure, this ISR allocates the
* recv buffers, if their numbers are below the panic value which is
* presently set to 25% of the original number of rcv buffers allocated.
* Return value:
- * IRQ_HANDLED: will be returned if IRQ was handled by this routine
+ * IRQ_HANDLED: will be returned if IRQ was handled by this routine
* IRQ_NONE: will be returned if interrupt is not from our device
*/
static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
@@ -2798,9 +2642,7 @@
struct net_device *dev = (struct net_device *) dev_id;
nic_t *sp = dev->priv;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
-#ifndef CONFIG_S2IO_NAPI
- int i, ret;
-#endif
+ int i;
u64 reason = 0;
mac_info_t *mac_control;
struct config_param *config;
@@ -2808,13 +2650,13 @@
mac_control = &sp->mac_control;
config = &sp->config;
- /*
+ /*
* Identify the cause for interrupt and call the appropriate
* interrupt handler. Causes for the interrupt could be;
* 1. Rx of packet.
* 2. Tx complete.
* 3. Link down.
- * 4. Error in any functional blocks of the NIC.
+ * 4. Error in any functional blocks of the NIC.
*/
reason = readq(&bar0->general_int_status);
@@ -2823,12 +2665,6 @@
return IRQ_NONE;
}
- /* If Intr is because of Tx Traffic */
- if (reason & GEN_INTR_TXTRAFFIC) {
- tx_intr_handler(sp);
- }
-
- /* If Intr is because of an error */
if (reason & (GEN_ERROR_INTR))
alarm_intr_handler(sp);
@@ -2843,17 +2679,26 @@
#else
/* If Intr is because of Rx Traffic */
if (reason & GEN_INTR_RXTRAFFIC) {
- rx_intr_handler(sp);
+ for (i = 0; i < config->rx_ring_num; i++) {
+ rx_intr_handler(&mac_control->rings[i]);
+ }
}
#endif
- /*
- * If the Rx buffer count is below the panic threshold then
- * reallocate the buffers from the interrupt handler itself,
+ /* If Intr is because of Tx Traffic */
+ if (reason & GEN_INTR_TXTRAFFIC) {
+ for (i = 0; i < config->tx_fifo_num; i++)
+ tx_intr_handler(&mac_control->fifos[i]);
+ }
+
+ /*
+ * If the Rx buffer count is below the panic threshold then
+ * reallocate the buffers from the interrupt handler itself,
* else schedule a tasklet to reallocate the buffers.
*/
#ifndef CONFIG_S2IO_NAPI
for (i = 0; i < config->rx_ring_num; i++) {
+ int ret;
int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
int level = rx_buffer_level(sp, rxb_size, i);
@@ -2878,29 +2723,33 @@
}
/**
- * s2io_get_stats - Updates the device statistics structure.
+ * s2io_get_stats - Updates the device statistics structure.
* @dev : pointer to the device structure.
* Description:
- * This function updates the device statistics structure in the s2io_nic
+ * This function updates the device statistics structure in the s2io_nic
* structure and returns a pointer to the same.
* Return value:
* pointer to the updated net_device_stats structure.
*/
-static struct net_device_stats *s2io_get_stats(struct net_device *dev)
+struct net_device_stats *s2io_get_stats(struct net_device *dev)
{
nic_t *sp = dev->priv;
mac_info_t *mac_control;
struct config_param *config;
+
mac_control = &sp->mac_control;
config = &sp->config;
- sp->stats.tx_errors = mac_control->stats_info->tmac_any_err_frms;
- sp->stats.rx_errors = mac_control->stats_info->rmac_drop_frms;
- sp->stats.multicast = mac_control->stats_info->rmac_vld_mcst_frms;
+ sp->stats.tx_errors =
+ le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
+ sp->stats.rx_errors =
+ le32_to_cpu(mac_control->stats_info->rmac_drop_frms);
+ sp->stats.multicast =
+ le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
sp->stats.rx_length_errors =
- mac_control->stats_info->rmac_long_frms;
+ le32_to_cpu(mac_control->stats_info->rmac_long_frms);
return (&sp->stats);
}
@@ -2909,8 +2758,8 @@
* s2io_set_multicast - entry point for multicast address enable/disable.
* @dev : pointer to the device structure
* Description:
- * This function is a driver entry point which gets called by the kernel
- * whenever multicast addresses must be enabled/disabled. This also gets
+ * This function is a driver entry point which gets called by the kernel
+ * whenever multicast addresses must be enabled/disabled. This also gets
* called to set/reset promiscuous mode. Depending on the deivce flag, we
* determine, if multicast address must be enabled or if promiscuous mode
* is to be disabled etc.
@@ -3010,7 +2859,7 @@
writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
&bar0->rmac_addr_data0_mem);
writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
- &bar0->rmac_addr_data1_mem);
+ &bar0->rmac_addr_data1_mem);
val64 = RMAC_ADDR_CMD_MEM_WE |
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET
@@ -3039,8 +2888,7 @@
writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
&bar0->rmac_addr_data0_mem);
writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
- &bar0->rmac_addr_data1_mem);
-
+ &bar0->rmac_addr_data1_mem);
val64 = RMAC_ADDR_CMD_MEM_WE |
RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
RMAC_ADDR_CMD_MEM_OFFSET
@@ -3059,12 +2907,12 @@
}
/**
- * s2io_set_mac_addr - Programs the Xframe mac address
+ * s2io_set_mac_addr - Programs the Xframe mac address
* @dev : pointer to the device structure.
* @addr: a uchar pointer to the new mac address which is to be set.
- * Description : This procedure will program the Xframe to receive
+ * Description : This procedure will program the Xframe to receive
* frames with new Mac Address
- * Return value: SUCCESS on success and an appropriate (-)ve integer
+ * Return value: SUCCESS on success and an appropriate (-)ve integer
* as defined in errno.h file on failure.
*/
@@ -3075,10 +2923,10 @@
register u64 val64, mac_addr = 0;
int i;
- /*
+ /*
* Set the new MAC address as the new unicast filter and reflect this
* change on the device address registered with the OS. It will be
- * at offset 0.
+ * at offset 0.
*/
for (i = 0; i < ETH_ALEN; i++) {
mac_addr <<= 8;
@@ -3102,12 +2950,12 @@
}
/**
- * s2io_ethtool_sset - Sets different link parameters.
+ * s2io_ethtool_sset - Sets different link parameters.
* @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
* @info: pointer to the structure with parameters given by ethtool to set
* link information.
* Description:
- * The function sets different link parameters provided by the user onto
+ * The function sets different link parameters provided by the user onto
* the NIC.
* Return value:
* 0 on success.
@@ -3129,7 +2977,7 @@
}
/**
- * s2io_ethtol_gset - Return link specific information.
+ * s2io_ethtol_gset - Return link specific information.
* @sp : private member of the device structure, pointer to the
* s2io_nic structure.
* @info : pointer to the structure with parameters given by ethtool
@@ -3161,8 +3009,8 @@
}
/**
- * s2io_ethtool_gdrvinfo - Returns driver specific information.
- * @sp : private member of the device structure, which is a pointer to the
+ * s2io_ethtool_gdrvinfo - Returns driver specific information.
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @info : pointer to the structure with parameters given by ethtool to
* return driver information.
@@ -3190,9 +3038,9 @@
/**
* s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
- * @sp: private member of the device structure, which is a pointer to the
+ * @sp: private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * @regs : pointer to the structure with parameters given by ethtool for
+ * @regs : pointer to the structure with parameters given by ethtool for
* dumping the registers.
* @reg_space: The input argumnet into which all the registers are dumped.
* Description:
@@ -3221,11 +3069,11 @@
/**
* s2io_phy_id - timer function that alternates adapter LED.
- * @data : address of the private member of the device structure, which
+ * @data : address of the private member of the device structure, which
* is a pointer to the s2io_nic structure, provided as an u32.
- * Description: This is actually the timer function that alternates the
- * adapter LED bit of the adapter control bit to set/reset every time on
- * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
+ * Description: This is actually the timer function that alternates the
+ * adapter LED bit of the adapter control bit to set/reset every time on
+ * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
* once every second.
*/
static void s2io_phy_id(unsigned long data)
@@ -3253,12 +3101,12 @@
* s2io_ethtool_idnic - To physically identify the nic on the system.
* @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * @id : pointer to the structure with identification parameters given by
+ * @id : pointer to the structure with identification parameters given by
* ethtool.
* Description: Used to physically identify the NIC on the system.
- * The Link LED will blink for a time specified by the user for
+ * The Link LED will blink for a time specified by the user for
* identification.
- * NOTE: The Link has to be Up to be able to blink the LED. Hence
+ * NOTE: The Link has to be Up to be able to blink the LED. Hence
* identification is possible only if it's link is up.
* Return value:
* int , returns 0 on success
@@ -3288,9 +3136,9 @@
}
mod_timer(&sp->id_timer, jiffies);
if (data)
- msleep(data * 1000);
+ msleep_interruptible(data * HZ);
else
- msleep(0xFFFFFFFF);
+ msleep_interruptible(MAX_FLICKER_TIME);
del_timer_sync(&sp->id_timer);
if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
@@ -3303,7 +3151,8 @@
/**
* s2io_ethtool_getpause_data -Pause frame frame generation and reception.
- * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
+ * @sp : private member of the device structure, which is a pointer to the
+ * s2io_nic structure.
* @ep : pointer to the structure with pause parameters given by ethtool.
* Description:
* Returns the Pause frame generation and reception capability of the NIC.
@@ -3327,7 +3176,7 @@
/**
* s2io_ethtool_setpause_data - set/reset pause frame generation.
- * @sp : private member of the device structure, which is a pointer to the
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @ep : pointer to the structure with pause parameters given by ethtool.
* Description:
@@ -3338,7 +3187,7 @@
*/
static int s2io_ethtool_setpause_data(struct net_device *dev,
- struct ethtool_pauseparam *ep)
+ struct ethtool_pauseparam *ep)
{
u64 val64;
nic_t *sp = dev->priv;
@@ -3359,13 +3208,13 @@
/**
* read_eeprom - reads 4 bytes of data from user given offset.
- * @sp : private member of the device structure, which is a pointer to the
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @off : offset at which the data must be written
* @data : Its an output parameter where the data read at the given
- * offset is stored.
+ * offset is stored.
* Description:
- * Will read 4 bytes of data from the user given offset and return the
+ * Will read 4 bytes of data from the user given offset and return the
* read data.
* NOTE: Will allow to read only part of the EEPROM visible through the
* I2C bus.
@@ -3406,7 +3255,7 @@
* s2io_nic structure.
* @off : offset at which the data must be written
* @data : The data that is to be written
- * @cnt : Number of bytes of the data that are actually to be written into
+ * @cnt : Number of bytes of the data that are actually to be written into
* the Eeprom. (max of 3)
* Description:
* Actually writes the relevant part of the data value into the Eeprom
@@ -3443,7 +3292,7 @@
/**
* s2io_ethtool_geeprom - reads the value stored in the Eeprom.
* @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
- * @eeprom : pointer to the user level structure provided by ethtool,
+ * @eeprom : pointer to the user level structure provided by ethtool,
* containing all relevant information.
* @data_buf : user defined value to be written into Eeprom.
* Description: Reads the values stored in the Eeprom at given offset
@@ -3454,7 +3303,7 @@
*/
static int s2io_ethtool_geeprom(struct net_device *dev,
- struct ethtool_eeprom *eeprom, u8 * data_buf)
+ struct ethtool_eeprom *eeprom, u8 * data_buf)
{
u32 data, i, valid;
nic_t *sp = dev->priv;
@@ -3479,7 +3328,7 @@
* s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
* @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * @eeprom : pointer to the user level structure provided by ethtool,
+ * @eeprom : pointer to the user level structure provided by ethtool,
* containing all relevant information.
* @data_buf ; user defined value to be written into Eeprom.
* Description:
@@ -3527,8 +3376,8 @@
}
/**
- * s2io_register_test - reads and writes into all clock domains.
- * @sp : private member of the device structure, which is a pointer to the
+ * s2io_register_test - reads and writes into all clock domains.
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @data : variable that returns the result of each of the test conducted b
* by the driver.
@@ -3545,8 +3394,8 @@
u64 val64 = 0;
int fail = 0;
- val64 = readq(&bar0->pcc_enable);
- if (val64 != 0xff00000000000000ULL) {
+ val64 = readq(&bar0->pif_rd_swapper_fb);
+ if (val64 != 0x123456789abcdefULL) {
fail = 1;
DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
}
@@ -3590,13 +3439,13 @@
}
/**
- * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
+ * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
* @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @data:variable that returns the result of each of the test conducted by
* the driver.
* Description:
- * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
+ * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
* register.
* Return value:
* 0 on success.
@@ -3661,14 +3510,14 @@
/**
* s2io_bist_test - invokes the MemBist test of the card .
- * @sp : private member of the device structure, which is a pointer to the
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * @data:variable that returns the result of each of the test conducted by
+ * @data:variable that returns the result of each of the test conducted by
* the driver.
* Description:
* This invokes the MemBist test of the card. We give around
* 2 secs time for the Test to complete. If it's still not complete
- * within this peiod, we consider that the test failed.
+ * within this peiod, we consider that the test failed.
* Return value:
* 0 on success and -1 on failure.
*/
@@ -3697,13 +3546,13 @@
}
/**
- * s2io-link_test - verifies the link state of the nic
- * @sp ; private member of the device structure, which is a pointer to the
+ * s2io-link_test - verifies the link state of the nic
+ * @sp ; private member of the device structure, which is a pointer to the
* s2io_nic structure.
* @data: variable that returns the result of each of the test conducted by
* the driver.
* Description:
- * The function verifies the link state of the NIC and updates the input
+ * The function verifies the link state of the NIC and updates the input
* argument 'data' appropriately.
* Return value:
* 0 on success.
@@ -3722,13 +3571,13 @@
}
/**
- * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
- * @sp - private member of the device structure, which is a pointer to the
+ * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
+ * @sp - private member of the device structure, which is a pointer to the
* s2io_nic structure.
- * @data - variable that returns the result of each of the test
+ * @data - variable that returns the result of each of the test
* conducted by the driver.
* Description:
- * This is one of the offline test that tests the read and write
+ * This is one of the offline test that tests the read and write
* access to the RldRam chip on the NIC.
* Return value:
* 0 on success.
@@ -3833,7 +3682,7 @@
* s2io_nic structure.
* @ethtest : pointer to a ethtool command specific structure that will be
* returned to the user.
- * @data : variable that returns the result of each of the test
+ * @data : variable that returns the result of each of the test
* conducted by the driver.
* Description:
* This function conducts 6 tests ( 4 offline and 2 online) to determine
@@ -3851,23 +3700,18 @@
if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
/* Offline Tests. */
- if (orig_state) {
+ if (orig_state)
s2io_close(sp->dev);
- s2io_set_swapper(sp);
- } else
- s2io_set_swapper(sp);
if (s2io_register_test(sp, &data[0]))
ethtest->flags |= ETH_TEST_FL_FAILED;
s2io_reset(sp);
- s2io_set_swapper(sp);
if (s2io_rldram_test(sp, &data[3]))
ethtest->flags |= ETH_TEST_FL_FAILED;
s2io_reset(sp);
- s2io_set_swapper(sp);
if (s2io_eeprom_test(sp, &data[1]))
ethtest->flags |= ETH_TEST_FL_FAILED;
@@ -3951,20 +3795,19 @@
tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
}
-static int s2io_ethtool_get_regs_len(struct net_device *dev)
+int s2io_ethtool_get_regs_len(struct net_device *dev)
{
return (XENA_REG_SPACE);
}
-static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
+u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
{
nic_t *sp = dev->priv;
return (sp->rx_csum);
}
-
-static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
+int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
{
nic_t *sp = dev->priv;
@@ -3975,19 +3818,17 @@
return 0;
}
-
-static int s2io_get_eeprom_len(struct net_device *dev)
+int s2io_get_eeprom_len(struct net_device *dev)
{
return (XENA_EEPROM_SPACE);
}
-static int s2io_ethtool_self_test_count(struct net_device *dev)
+int s2io_ethtool_self_test_count(struct net_device *dev)
{
return (S2IO_TEST_LEN);
}
-
-static void s2io_ethtool_get_strings(struct net_device *dev,
- u32 stringset, u8 * data)
+void s2io_ethtool_get_strings(struct net_device *dev,
+ u32 stringset, u8 * data)
{
switch (stringset) {
case ETH_SS_TEST:
@@ -3998,13 +3839,12 @@
sizeof(ethtool_stats_keys));
}
}
-
static int s2io_ethtool_get_stats_count(struct net_device *dev)
{
return (S2IO_STAT_LEN);
}
-static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
+int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
{
if (data)
dev->features |= NETIF_F_IP_CSUM;
@@ -4046,21 +3886,18 @@
};
/**
- * s2io_ioctl - Entry point for the Ioctl
+ * s2io_ioctl - Entry point for the Ioctl
* @dev : Device pointer.
* @ifr : An IOCTL specefic structure, that can contain a pointer to
* a proprietary structure used to pass information to the driver.
* @cmd : This is used to distinguish between the different commands that
* can be passed to the IOCTL functions.
* Description:
- * This function has support for ethtool, adding multiple MAC addresses on
- * the NIC and some DBG commands for the util tool.
- * Return value:
- * Currently the IOCTL supports no operations, hence by default this
- * function returns OP NOT SUPPORTED value.
+ * Currently there are no special functionality supported in IOCTL, hence
+ * function always return EOPNOTSUPPORTED
*/
-static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
return -EOPNOTSUPP;
}
@@ -4076,7 +3913,7 @@
* file on failure.
*/
-static int s2io_change_mtu(struct net_device *dev, int new_mtu)
+int s2io_change_mtu(struct net_device *dev, int new_mtu)
{
nic_t *sp = dev->priv;
XENA_dev_config_t __iomem *bar0 = sp->bar0;
@@ -4084,7 +3921,7 @@
if (netif_running(dev)) {
DBG_PRINT(ERR_DBG, "%s: Must be stopped to ", dev->name);
- DBG_PRINT(ERR_DBG, "change its MTU \n");
+ DBG_PRINT(ERR_DBG, "change its MTU\n");
return -EBUSY;
}
@@ -4108,9 +3945,9 @@
* @dev_adr : address of the device structure in dma_addr_t format.
* Description:
* This is the tasklet or the bottom half of the ISR. This is
- * an extension of the ISR which is scheduled by the scheduler to be run
+ * an extension of the ISR which is scheduled by the scheduler to be run
* when the load on the CPU is low. All low priority tasks of the ISR can
- * be pushed into the tasklet. For now the tasklet is used only to
+ * be pushed into the tasklet. For now the tasklet is used only to
* replenish the Rx buffers in the Rx buffer descriptors.
* Return value:
* void.
@@ -4166,14 +4003,14 @@
}
subid = nic->pdev->subsystem_device;
- /*
- * Allow a small delay for the NICs self initiated
+ /*
+ * Allow a small delay for the NICs self initiated
* cleanup to complete.
*/
msleep(100);
val64 = readq(&bar0->adapter_status);
- if (verify_xena_quiescence(val64, nic->device_enabled_once)) {
+ if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
if (LINK_IS_UP(val64)) {
val64 = readq(&bar0->adapter_control);
val64 |= ADAPTER_CNTL_EN;
@@ -4224,8 +4061,9 @@
register u64 val64 = 0;
/* If s2io_set_link task is executing, wait till it completes. */
- while (test_and_set_bit(0, &(sp->link_state)))
+ while (test_and_set_bit(0, &(sp->link_state))) {
msleep(50);
+ }
atomic_set(&sp->card_state, CARD_DOWN);
/* disable Tx and Rx traffic on the NIC */
@@ -4237,7 +4075,7 @@
/* Check if the device is Quiescent and then Reset the NIC */
do {
val64 = readq(&bar0->adapter_status);
- if (verify_xena_quiescence(val64, sp->device_enabled_once)) {
+ if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) {
break;
}
@@ -4276,8 +4114,8 @@
return -ENODEV;
}
- /*
- * Initializing the Rx buffers. For now we are considering only 1
+ /*
+ * Initializing the Rx buffers. For now we are considering only 1
* Rx ring and initializing buffers into 30 Rx blocks
*/
mac_control = &sp->mac_control;
@@ -4315,12 +4153,12 @@
return 0;
}
-/**
+/**
* s2io_restart_nic - Resets the NIC.
* @data : long pointer to the device private structure
* Description:
* This function is scheduled to be run by the s2io_tx_watchdog
- * function after 0.5 secs to reset the NIC. The idea is to reduce
+ * function after 0.5 secs to reset the NIC. The idea is to reduce
* the run time of the watch dog routine which is run holding a
* spin lock.
*/
@@ -4338,10 +4176,11 @@
netif_wake_queue(dev);
DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
dev->name);
+
}
-/**
- * s2io_tx_watchdog - Watchdog for transmit side.
+/**
+ * s2io_tx_watchdog - Watchdog for transmit side.
* @dev : Pointer to net device structure
* Description:
* This function is triggered if the Tx Queue is stopped
@@ -4369,7 +4208,7 @@
* @len : length of the packet
* @cksum : FCS checksum of the frame.
* @ring_no : the ring from which this RxD was extracted.
- * Description:
+ * Description:
* This function is called by the Tx interrupt serivce routine to perform
* some OS related operations on the SKB before passing it to the upper
* layers. It mainly checks if the checksum is OK, if so adds it to the
@@ -4379,71 +4218,33 @@
* Return value:
* SUCCESS on success and -1 on failure.
*/
-#ifndef CONFIG_2BUFF_MODE
-static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no)
-#else
-static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
- buffAdd_t * ba)
-#endif
+static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
{
+ nic_t *sp = ring_data->nic;
struct net_device *dev = (struct net_device *) sp->dev;
- struct sk_buff *skb =
- (struct sk_buff *) ((unsigned long) rxdp->Host_Control);
+ struct sk_buff *skb = (struct sk_buff *)
+ ((unsigned long) rxdp->Host_Control);
+ int ring_no = ring_data->ring_no;
u16 l3_csum, l4_csum;
#ifdef CONFIG_2BUFF_MODE
- int buf0_len, buf2_len;
+ int buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
+ int buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2);
+ int get_block = ring_data->rx_curr_get_info.block_index;
+ int get_off = ring_data->rx_curr_get_info.offset;
+ buffAdd_t *ba = &ring_data->ba[get_block][get_off];
unsigned char *buff;
+#else
+ u16 len = (u16) ((RXD_GET_BUFFER0_SIZE(rxdp->Control_2)) >> 48);;
#endif
-
- l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
- if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && (sp->rx_csum)) {
- l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
- if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
- /*
- * NIC verifies if the Checksum of the received
- * frame is Ok or not and accordingly returns
- * a flag in the RxD.
- */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- } else {
- /*
- * Packet with erroneous checksum, let the
- * upper layers deal with it.
- */
- skb->ip_summed = CHECKSUM_NONE;
- }
- } else {
- skb->ip_summed = CHECKSUM_NONE;
- }
-
+ skb->dev = dev;
if (rxdp->Control_1 & RXD_T_CODE) {
unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
dev->name, err);
}
-#ifdef CONFIG_2BUFF_MODE
- buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
- buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2);
-#endif
- skb->dev = dev;
-#ifndef CONFIG_2BUFF_MODE
- skb_put(skb, len);
- skb->protocol = eth_type_trans(skb, dev);
-#else
- buff = skb_push(skb, buf0_len);
- memcpy(buff, ba->ba_0, buf0_len);
- skb_put(skb, buf2_len);
- skb->protocol = eth_type_trans(skb, dev);
-#endif
-
-#ifdef CONFIG_S2IO_NAPI
- netif_receive_skb(skb);
-#else
- netif_rx(skb);
-#endif
-
- dev->last_rx = jiffies;
+ /* Updating statistics */
+ rxdp->Host_Control = 0;
sp->rx_pkt_count++;
sp->stats.rx_packets++;
#ifndef CONFIG_2BUFF_MODE
@@ -4452,8 +4253,44 @@
sp->stats.rx_bytes += buf0_len + buf2_len;
#endif
+#ifndef CONFIG_2BUFF_MODE
+ skb_put(skb, len);
+#else
+ buff = skb_push(skb, buf0_len);
+ memcpy(buff, ba->ba_0, buf0_len);
+ skb_put(skb, buf2_len);
+#endif
+
+ if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
+ (sp->rx_csum)) {
+ l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
+ l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
+ if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
+ /*
+ * NIC verifies if the Checksum of the received
+ * frame is Ok or not and accordingly returns
+ * a flag in the RxD.
+ */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else {
+ /*
+ * Packet with erroneous checksum, let the
+ * upper layers deal with it.
+ */
+ skb->ip_summed = CHECKSUM_NONE;
+ }
+ } else {
+ skb->ip_summed = CHECKSUM_NONE;
+ }
+
+ skb->protocol = eth_type_trans(skb, dev);
+#ifdef CONFIG_S2IO_NAPI
+ netif_receive_skb(skb);
+#else
+ netif_rx(skb);
+#endif
+ dev->last_rx = jiffies;
atomic_dec(&sp->rx_bufs_left[ring_no]);
- rxdp->Host_Control = 0;
return SUCCESS;
}
@@ -4464,13 +4301,13 @@
* @link : inidicates whether link is UP/DOWN.
* Description:
* This function stops/starts the Tx queue depending on whether the link
- * status of the NIC is is down or up. This is called by the Alarm
- * interrupt handler whenever a link change interrupt comes up.
+ * status of the NIC is is down or up. This is called by the Alarm
+ * interrupt handler whenever a link change interrupt comes up.
* Return value:
* void.
*/
-static void s2io_link(nic_t * sp, int link)
+void s2io_link(nic_t * sp, int link)
{
struct net_device *dev = (struct net_device *) sp->dev;
@@ -4487,8 +4324,25 @@
}
/**
- * s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
- * @sp : private member of the device structure, which is a pointer to the
+ * get_xena_rev_id - to identify revision ID of xena.
+ * @pdev : PCI Dev structure
+ * Description:
+ * Function to identify the Revision ID of xena.
+ * Return value:
+ * returns the revision ID of the device.
+ */
+
+int get_xena_rev_id(struct pci_dev *pdev)
+{
+ u8 id = 0;
+ int ret;
+ ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id);
+ return id;
+}
+
+/**
+ * s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
+ * @sp : private member of the device structure, which is a pointer to the
* s2io_nic structure.
* Description:
* This function initializes a few of the PCI and PCI-X configuration registers
@@ -4499,15 +4353,15 @@
static void s2io_init_pci(nic_t * sp)
{
- u16 pci_cmd = 0;
+ u16 pci_cmd = 0, pcix_cmd = 0;
/* Enable Data Parity Error Recovery in PCI-X command register. */
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- &(sp->pcix_cmd));
+ &(pcix_cmd));
pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- (sp->pcix_cmd | 1));
+ (pcix_cmd | 1));
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- &(sp->pcix_cmd));
+ &(pcix_cmd));
/* Set the PErr Response bit in PCI command register. */
pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
@@ -4516,34 +4370,36 @@
pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
/* Set MMRB count to 1024 in PCI-X Command register. */
- sp->pcix_cmd &= 0xFFF3;
- pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, (sp->pcix_cmd | (0x1 << 2))); /* MMRBC 1K */
+ pcix_cmd &= 0xFFF3;
+ pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
+ (pcix_cmd | (0x1 << 2))); /* MMRBC 1K */
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- &(sp->pcix_cmd));
+ &(pcix_cmd));
/* Setting Maximum outstanding splits based on system type. */
- sp->pcix_cmd &= 0xFF8F;
+ pcix_cmd &= 0xFF8F;
+ pcix_cmd |= XENA_MAX_OUTSTANDING_SPLITS(0x1); /* 2 splits. */
+ pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
+ pcix_cmd);
+ pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
+ &(pcix_cmd));
- sp->pcix_cmd |= XENA_MAX_OUTSTANDING_SPLITS(0x1); /* 2 splits. */
- pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- sp->pcix_cmd);
- pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- &(sp->pcix_cmd));
/* Forcibly disabling relaxed ordering capability of the card. */
- sp->pcix_cmd &= 0xfffd;
+ pcix_cmd &= 0xfffd;
pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- sp->pcix_cmd);
+ pcix_cmd);
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- &(sp->pcix_cmd));
+ &(pcix_cmd));
}
MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>");
MODULE_LICENSE("GPL");
module_param(tx_fifo_num, int, 0);
-module_param_array(tx_fifo_len, int, NULL, 0);
module_param(rx_ring_num, int, 0);
-module_param_array(rx_ring_sz, int, NULL, 0);
+module_param_array(tx_fifo_len, uint, NULL, 0);
+module_param_array(rx_ring_sz, uint, NULL, 0);
module_param(Stats_refresh_time, int, 0);
+module_param_array(rts_frm_len, uint, NULL, 0);
module_param(rmac_pause_time, int, 0);
module_param(mc_pause_threshold_q0q3, int, 0);
module_param(mc_pause_threshold_q4q7, int, 0);
@@ -4553,15 +4409,16 @@
#ifndef CONFIG_S2IO_NAPI
module_param(indicate_max_pkts, int, 0);
#endif
+
/**
- * s2io_init_nic - Initialization of the adapter .
+ * s2io_init_nic - Initialization of the adapter .
* @pdev : structure containing the PCI related information of the device.
* @pre: List of PCI devices supported by the driver listed in s2io_tbl.
* Description:
* The function initializes an adapter identified by the pci_dec structure.
- * All OS related initialization including memory and device structure and
- * initlaization of the device private variable is done. Also the swapper
- * control register is initialized to enable read and write into the I/O
+ * All OS related initialization including memory and device structure and
+ * initlaization of the device private variable is done. Also the swapper
+ * control register is initialized to enable read and write into the I/O
* registers of the device.
* Return value:
* returns 0 on success and negative on failure.
@@ -4572,7 +4429,6 @@
{
nic_t *sp;
struct net_device *dev;
- char *dev_name = "S2IO 10GE NIC";
int i, j, ret;
int dma_flag = FALSE;
u32 mac_up, mac_down;
@@ -4582,9 +4438,9 @@
mac_info_t *mac_control;
struct config_param *config;
-
- DBG_PRINT(ERR_DBG, "Loading S2IO driver with %s\n",
- s2io_driver_version);
+#ifdef CONFIG_S2IO_NAPI
+ DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
+#endif
if ((ret = pci_enable_device(pdev))) {
DBG_PRINT(ERR_DBG,
@@ -4595,7 +4451,6 @@
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
dma_flag = TRUE;
-
if (pci_set_consistent_dma_mask
(pdev, DMA_64BIT_MASK)) {
DBG_PRINT(ERR_DBG,
@@ -4635,21 +4490,17 @@
memset(sp, 0, sizeof(nic_t));
sp->dev = dev;
sp->pdev = pdev;
- sp->vendor_id = pdev->vendor;
- sp->device_id = pdev->device;
sp->high_dma_flag = dma_flag;
- sp->irq = pdev->irq;
sp->device_enabled_once = FALSE;
- strcpy(sp->name, dev_name);
/* Initialize some PCI/PCI-X fields of the NIC. */
s2io_init_pci(sp);
- /*
+ /*
* Setting the device configuration parameters.
- * Most of these parameters can be specified by the user during
- * module insertion as they are module loadable parameters. If
- * these parameters are not not specified during load time, they
+ * Most of these parameters can be specified by the user during
+ * module insertion as they are module loadable parameters. If
+ * these parameters are not not specified during load time, they
* are initialized with default values.
*/
mac_control = &sp->mac_control;
@@ -4663,6 +4514,10 @@
config->tx_cfg[i].fifo_priority = i;
}
+ /* mapping the QoS priority to the configured fifos */
+ for (i = 0; i < MAX_TX_FIFOS; i++)
+ config->fifo_mapping[i] = fifo_map[config->tx_fifo_num][i];
+
config->tx_intr_type = TXD_INT_TYPE_UTILZ;
for (i = 0; i < config->tx_fifo_num; i++) {
config->tx_cfg[i].f_no_snoop =
@@ -4743,13 +4598,14 @@
dev->do_ioctl = &s2io_ioctl;
dev->change_mtu = &s2io_change_mtu;
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+
/*
* will use eth_mac_addr() for dev->set_mac_address
* mac address will be set every time dev->open() is called
*/
-#ifdef CONFIG_S2IO_NAPI
+#if defined(CONFIG_S2IO_NAPI)
dev->poll = s2io_poll;
- dev->weight = 90;
+ dev->weight = 32;
#endif
dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
@@ -4776,22 +4632,14 @@
goto set_swap_failed;
}
- /* Fix for all "FFs" MAC address problems observed on Alpha platforms */
+ /*
+ * Fix for all "FFs" MAC address problems observed on
+ * Alpha platforms
+ */
fix_mac_address(sp);
s2io_reset(sp);
/*
- * Setting swapper control on the NIC, so the MAC address can be read.
- */
- if (s2io_set_swapper(sp)) {
- DBG_PRINT(ERR_DBG,
- "%s: S2IO: swapper settings are wrong\n",
- dev->name);
- ret = -EAGAIN;
- goto set_swap_failed;
- }
-
- /*
* MAC address initialization.
* For now only one mac address will be read and used.
*/
@@ -4828,23 +4676,22 @@
memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
/*
- * Initialize the tasklet status and link state flags
+ * Initialize the tasklet status and link state flags
* and the card statte parameter
*/
atomic_set(&(sp->card_state), 0);
sp->tasklet_status = 0;
sp->link_state = 0;
-
/* Initialize spinlocks */
spin_lock_init(&sp->tx_lock);
#ifndef CONFIG_S2IO_NAPI
spin_lock_init(&sp->put_lock);
#endif
- /*
- * SXE-002: Configure link and activity LED to init state
- * on driver load.
+ /*
+ * SXE-002: Configure link and activity LED to init state
+ * on driver load.
*/
subid = sp->pdev->subsystem_device;
if ((subid & 0xFF) >= 0x07) {
@@ -4864,9 +4711,9 @@
goto register_failed;
}
- /*
- * Make Link state as off at this point, when the Link change
- * interrupt comes the state will be automatically changed to
+ /*
+ * Make Link state as off at this point, when the Link change
+ * interrupt comes the state will be automatically changed to
* the right state.
*/
netif_carrier_off(dev);
@@ -4891,11 +4738,11 @@
}
/**
- * s2io_rem_nic - Free the PCI device
+ * s2io_rem_nic - Free the PCI device
* @pdev: structure containing the PCI related information of the device.
- * Description: This function is called by the Pci subsystem to release a
+ * Description: This function is called by the Pci subsystem to release a
* PCI device and free up all resource held up by the device. This could
- * be in response to a Hot plug event or when the driver is to be removed
+ * be in response to a Hot plug event or when the driver is to be removed
* from memory.
*/
@@ -4919,7 +4766,6 @@
pci_disable_device(pdev);
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
-
free_netdev(dev);
}
@@ -4935,11 +4781,11 @@
}
/**
- * s2io_closer - Cleanup routine for the driver
+ * s2io_closer - Cleanup routine for the driver
* Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
*/
-static void s2io_closer(void)
+void s2io_closer(void)
{
pci_unregister_driver(&s2io_driver);
DBG_PRINT(INIT_DBG, "cleanup done\n");