Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 203afecaa320fa8c541ce130aed449ff53f5b4aa / . / drivers / net / wireless / mwifiex / sta_ioctl.c
blob: 362301f417a4462c4d61b3f0a279437aa3d7e212 [file] [log] [blame]
/*
* Marvell Wireless LAN device driver: functions for station ioctl
*
* Copyright (C) 2011, Marvell International Ltd.
*
* This software file (the "File") is distributed by Marvell International
* Ltd. under the terms of the GNU General Public License Version 2, June 1991
* (the "License"). You may use, redistribute and/or modify this File in
* accordance with the terms and conditions of the License, a copy of which
* is available by writing to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
* worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*/
#include "decl.h"
#include "ioctl.h"
#include "util.h"
#include "fw.h"
#include "main.h"
#include "wmm.h"
#include "11n.h"
#include "cfg80211.h"
/*
* Copies the multicast address list from device to driver.
*
* This function does not validate the destination memory for
* size, and the calling function must ensure enough memory is
* available.
*/
static int
mwifiex_copy_mcast_addr(struct mwifiex_multicast_list *mlist,
struct net_device *dev)
{
int i = 0;
struct netdev_hw_addr *ha;
netdev_for_each_mc_addr(ha, dev)
memcpy(&mlist->mac_list[i++], ha->addr, ETH_ALEN);
return i;
}
/*
* Allocate and fills a wait queue with proper parameters.
*
* This function needs to be called before an IOCTL request can be made.
* It can handle the following wait options:
* MWIFIEX_NO_WAIT - Waiting is disabled
* MWIFIEX_IOCTL_WAIT - Waiting is done on IOCTL wait queue
* MWIFIEX_CMD_WAIT - Waiting is done on command wait queue
* MWIFIEX_WSTATS_WAIT - Waiting is done on stats wait queue
*/
struct mwifiex_wait_queue *
mwifiex_alloc_fill_wait_queue(struct mwifiex_private *priv,
u8 wait_option)
{
struct mwifiex_wait_queue *wait = NULL;
wait = (struct mwifiex_wait_queue *)
kzalloc(sizeof(struct mwifiex_wait_queue), GFP_ATOMIC);
if (!wait) {
dev_err(priv->adapter->dev, "%s: fail to alloc buffer\n",
__func__);
return wait;
}
wait->bss_index = priv->bss_index;
switch (wait_option) {
case MWIFIEX_NO_WAIT:
wait->enabled = 0;
break;
case MWIFIEX_IOCTL_WAIT:
priv->ioctl_wait_q_woken = false;
wait->start_time = jiffies;
wait->wait = &priv->ioctl_wait_q;
wait->condition = &priv->ioctl_wait_q_woken;
wait->enabled = 1;
break;
case MWIFIEX_CMD_WAIT:
priv->cmd_wait_q_woken = false;
wait->start_time = jiffies;
wait->wait = &priv->cmd_wait_q;
wait->condition = &priv->cmd_wait_q_woken;
wait->enabled = 1;
break;
case MWIFIEX_WSTATS_WAIT:
priv->w_stats_wait_q_woken = false;
wait->start_time = jiffies;
wait->wait = &priv->w_stats_wait_q;
wait->condition = &priv->w_stats_wait_q_woken;
wait->enabled = 1;
break;
}
return wait;
}
/*
* Wait queue completion handler.
*
* This function waits on a particular wait queue.
* For NO_WAIT option, it returns immediately. It also cancels the
* pending IOCTL request after waking up, in case of errors.
*/
static void
mwifiex_wait_ioctl_complete(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
u8 wait_option)
{
bool cancel_flag = false;
switch (wait_option) {
case MWIFIEX_NO_WAIT:
break;
case MWIFIEX_IOCTL_WAIT:
wait_event_interruptible(priv->ioctl_wait_q,
priv->ioctl_wait_q_woken);
if (!priv->ioctl_wait_q_woken)
cancel_flag = true;
break;
case MWIFIEX_CMD_WAIT:
wait_event_interruptible(priv->cmd_wait_q,
priv->cmd_wait_q_woken);
if (!priv->cmd_wait_q_woken)
cancel_flag = true;
break;
case MWIFIEX_WSTATS_WAIT:
wait_event_interruptible(priv->w_stats_wait_q,
priv->w_stats_wait_q_woken);
if (!priv->w_stats_wait_q_woken)
cancel_flag = true;
break;
}
if (cancel_flag) {
mwifiex_cancel_pending_ioctl(priv->adapter, wait);
dev_dbg(priv->adapter->dev, "cmd: IOCTL cancel: wait=%p, wait_option=%d\n",
wait, wait_option);
}
return;
}
/*
* The function waits for the request to complete and issues the
* completion handler, if required.
*/
int mwifiex_request_ioctl(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
int status, u8 wait_option)
{
switch (status) {
case -EINPROGRESS:
dev_dbg(priv->adapter->dev, "cmd: IOCTL pending: wait=%p, wait_option=%d\n",
wait, wait_option);
atomic_inc(&priv->adapter->ioctl_pending);
/* Status pending, wake up main process */
queue_work(priv->adapter->workqueue, &priv->adapter->main_work);
/* Wait for completion */
if (wait_option) {
mwifiex_wait_ioctl_complete(priv, wait, wait_option);
status = wait->status;
}
break;
case 0:
case -1:
case -EBUSY:
default:
break;
}
return status;
}
EXPORT_SYMBOL_GPL(mwifiex_request_ioctl);
/*
* IOCTL request handler to set/get MAC address.
*
* This function prepares the correct firmware command and
* issues it to get the extended version information.
*/
static int mwifiex_bss_ioctl_mac_address(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
u8 action, u8 *mac)
{
int ret = 0;
if ((action == HostCmd_ACT_GEN_GET) && mac) {
memcpy(mac, priv->curr_addr, ETH_ALEN);
return 0;
}
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_MAC_ADDRESS,
action, 0, wait, mac);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* Sends IOCTL request to set MAC address.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int mwifiex_request_set_mac_address(struct mwifiex_private *priv)
{
struct mwifiex_wait_queue *wait = NULL;
int status = 0;
u8 wait_option = MWIFIEX_CMD_WAIT;
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return -ENOMEM;
status = mwifiex_bss_ioctl_mac_address(priv, wait, HostCmd_ACT_GEN_SET,
NULL);
status = mwifiex_request_ioctl(priv, wait, status, wait_option);
if (!status)
memcpy(priv->netdev->dev_addr, priv->curr_addr, ETH_ALEN);
else
dev_err(priv->adapter->dev, "set mac address failed: status=%d"
" error_code=%#x\n", status, wait->status);
kfree(wait);
return status;
}
/*
* IOCTL request handler to set multicast list.
*
* This function prepares the correct firmware command and
* issues it to set the multicast list.
*
* This function can be used to enable promiscuous mode, or enable all
* multicast packets, or to enable selective multicast.
*/
static int
mwifiex_bss_ioctl_multicast_list(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
u16 action,
struct mwifiex_multicast_list *mcast_list)
{
int ret = 0;
u16 old_pkt_filter;
old_pkt_filter = priv->curr_pkt_filter;
if (action == HostCmd_ACT_GEN_GET)
return -1;
if (mcast_list->mode == MWIFIEX_PROMISC_MODE) {
dev_dbg(priv->adapter->dev, "info: Enable Promiscuous mode\n");
priv->curr_pkt_filter |= HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
priv->curr_pkt_filter &=
~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
} else {
/* Multicast */
priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
if (mcast_list->mode == MWIFIEX_MULTICAST_MODE) {
dev_dbg(priv->adapter->dev,
"info: Enabling All Multicast!\n");
priv->curr_pkt_filter |=
HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
} else {
priv->curr_pkt_filter &=
~HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE;
if (mcast_list->num_multicast_addr) {
dev_dbg(priv->adapter->dev,
"info: Set multicast list=%d\n",
mcast_list->num_multicast_addr);
/* Set multicast addresses to firmware */
if (old_pkt_filter == priv->curr_pkt_filter) {
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv,
HostCmd_CMD_MAC_MULTICAST_ADR,
action, 0, wait, mcast_list);
if (!ret)
ret = -EINPROGRESS;
} else {
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv,
HostCmd_CMD_MAC_MULTICAST_ADR,
action, 0, NULL,
mcast_list);
}
}
}
}
dev_dbg(priv->adapter->dev,
"info: old_pkt_filter=%#x, curr_pkt_filter=%#x\n",
old_pkt_filter, priv->curr_pkt_filter);
if (old_pkt_filter != priv->curr_pkt_filter) {
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_MAC_CONTROL, action,
0, wait, &priv->curr_pkt_filter);
if (!ret)
ret = -EINPROGRESS;
}
return ret;
}
/*
* Sends IOCTL request to set multicast list.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
void
mwifiex_request_set_multicast_list(struct mwifiex_private *priv,
struct net_device *dev)
{
struct mwifiex_wait_queue *wait = NULL;
struct mwifiex_multicast_list mcast_list;
u8 wait_option = MWIFIEX_NO_WAIT;
int status = 0;
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return;
if (dev->flags & IFF_PROMISC) {
mcast_list.mode = MWIFIEX_PROMISC_MODE;
} else if (dev->flags & IFF_ALLMULTI ||
netdev_mc_count(dev) > MWIFIEX_MAX_MULTICAST_LIST_SIZE) {
mcast_list.mode = MWIFIEX_ALL_MULTI_MODE;
} else {
mcast_list.mode = MWIFIEX_MULTICAST_MODE;
if (netdev_mc_count(dev))
mcast_list.num_multicast_addr =
mwifiex_copy_mcast_addr(&mcast_list, dev);
}
status = mwifiex_bss_ioctl_multicast_list(priv, wait,
HostCmd_ACT_GEN_SET,
&mcast_list);
status = mwifiex_request_ioctl(priv, wait, status, wait_option);
if (wait && status != -EINPROGRESS)
kfree(wait);
return;
}
/*
* IOCTL request handler to disconnect from a BSS/IBSS.
*/
static int mwifiex_bss_ioctl_stop(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait, u8 *mac)
{
return mwifiex_deauthenticate(priv, wait, mac);
}
/*
* Sends IOCTL request to disconnect from a BSS.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int mwifiex_disconnect(struct mwifiex_private *priv, u8 wait_option, u8 *mac)
{
struct mwifiex_wait_queue *wait = NULL;
int status = 0;
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return -ENOMEM;
status = mwifiex_bss_ioctl_stop(priv, wait, mac);
status = mwifiex_request_ioctl(priv, wait, status, wait_option);
kfree(wait);
return status;
}
EXPORT_SYMBOL_GPL(mwifiex_disconnect);
/*
* IOCTL request handler to join a BSS/IBSS.
*
* In Ad-Hoc mode, the IBSS is created if not found in scan list.
* In both Ad-Hoc and infra mode, an deauthentication is performed
* first.
*/
static int mwifiex_bss_ioctl_start(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_ssid_bssid *ssid_bssid)
{
int ret = 0;
struct mwifiex_adapter *adapter = priv->adapter;
s32 i = -1;
priv->scan_block = false;
if (!ssid_bssid)
return -1;
if (priv->bss_mode == MWIFIEX_BSS_MODE_INFRA) {
/* Infra mode */
ret = mwifiex_deauthenticate(priv, NULL, NULL);
if (ret)
return ret;
/* Search for the requested SSID in the scan table */
if (ssid_bssid->ssid.ssid_len)
i = mwifiex_find_ssid_in_list(priv, &ssid_bssid->ssid,
NULL, MWIFIEX_BSS_MODE_INFRA);
else
i = mwifiex_find_bssid_in_list(priv,
(u8 *) &ssid_bssid->bssid,
MWIFIEX_BSS_MODE_INFRA);
if (i < 0)
return -1;
dev_dbg(adapter->dev,
"info: SSID found in scan list ... associating...\n");
/* Clear any past association response stored for
* application retrieval */
priv->assoc_rsp_size = 0;
ret = mwifiex_associate(priv, wait, &adapter->scan_table[i]);
if (ret)
return ret;
} else {
/* Adhoc mode */
/* If the requested SSID matches current SSID, return */
if (ssid_bssid->ssid.ssid_len &&
(!mwifiex_ssid_cmp
(&priv->curr_bss_params.bss_descriptor.ssid,
&ssid_bssid->ssid)))
return 0;
/* Exit Adhoc mode first */
dev_dbg(adapter->dev, "info: Sending Adhoc Stop\n");
ret = mwifiex_deauthenticate(priv, NULL, NULL);
if (ret)
return ret;
priv->adhoc_is_link_sensed = false;
/* Search for the requested network in the scan table */
if (ssid_bssid->ssid.ssid_len)
i = mwifiex_find_ssid_in_list(priv,
&ssid_bssid->ssid, NULL,
MWIFIEX_BSS_MODE_IBSS);
else
i = mwifiex_find_bssid_in_list(priv,
(u8 *)&ssid_bssid->bssid,
MWIFIEX_BSS_MODE_IBSS);
if (i >= 0) {
dev_dbg(adapter->dev, "info: network found in scan"
" list. Joining...\n");
ret = mwifiex_adhoc_join(priv, wait,
&adapter->scan_table[i]);
if (ret)
return ret;
} else { /* i >= 0 */
dev_dbg(adapter->dev, "info: Network not found in "
"the list, creating adhoc with ssid = %s\n",
ssid_bssid->ssid.ssid);
ret = mwifiex_adhoc_start(priv, wait,
&ssid_bssid->ssid);
if (ret)
return ret;
}
}
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* Sends IOCTL request to connect with a BSS.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int mwifiex_bss_start(struct mwifiex_private *priv, u8 wait_option,
struct mwifiex_ssid_bssid *ssid_bssid)
{
struct mwifiex_wait_queue *wait = NULL;
struct mwifiex_ssid_bssid tmp_ssid_bssid;
int status = 0;
/* Stop the O.S. TX queue if needed */
if (!netif_queue_stopped(priv->netdev))
netif_stop_queue(priv->netdev);
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return -ENOMEM;
if (ssid_bssid)
memcpy(&tmp_ssid_bssid, ssid_bssid,
sizeof(struct mwifiex_ssid_bssid));
status = mwifiex_bss_ioctl_start(priv, wait, &tmp_ssid_bssid);
status = mwifiex_request_ioctl(priv, wait, status, wait_option);
kfree(wait);
return status;
}
/*
* IOCTL request handler to set host sleep configuration.
*
* This function prepares the correct firmware command and
* issues it.
*/
static int
mwifiex_pm_ioctl_hs_cfg(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
u16 action, struct mwifiex_ds_hs_cfg *hs_cfg)
{
struct mwifiex_adapter *adapter = priv->adapter;
int status = 0;
u32 prev_cond = 0;
switch (action) {
case HostCmd_ACT_GEN_SET:
if (adapter->pps_uapsd_mode) {
dev_dbg(adapter->dev, "info: Host Sleep IOCTL"
" is blocked in UAPSD/PPS mode\n");
status = -1;
break;
}
if (hs_cfg->is_invoke_hostcmd) {
if (hs_cfg->conditions == HOST_SLEEP_CFG_CANCEL) {
if (!adapter->is_hs_configured)
/* Already cancelled */
break;
/* Save previous condition */
prev_cond = le32_to_cpu(adapter->hs_cfg
.conditions);
adapter->hs_cfg.conditions =
cpu_to_le32(hs_cfg->conditions);
} else if (hs_cfg->conditions) {
adapter->hs_cfg.conditions =
cpu_to_le32(hs_cfg->conditions);
adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
if (hs_cfg->gap)
adapter->hs_cfg.gap = (u8)hs_cfg->gap;
} else if (adapter->hs_cfg.conditions ==
cpu_to_le32(
HOST_SLEEP_CFG_CANCEL)) {
/* Return failure if no parameters for HS
enable */
status = -1;
break;
}
status = mwifiex_prepare_cmd(priv,
HostCmd_CMD_802_11_HS_CFG_ENH,
HostCmd_ACT_GEN_SET,
0, wait, &adapter->hs_cfg);
if (!status)
status = -EINPROGRESS;
if (hs_cfg->conditions == HOST_SLEEP_CFG_CANCEL)
/* Restore previous condition */
adapter->hs_cfg.conditions =
cpu_to_le32(prev_cond);
} else {
adapter->hs_cfg.conditions =
cpu_to_le32(hs_cfg->conditions);
adapter->hs_cfg.gpio = (u8)hs_cfg->gpio;
adapter->hs_cfg.gap = (u8)hs_cfg->gap;
}
break;
case HostCmd_ACT_GEN_GET:
hs_cfg->conditions = le32_to_cpu(adapter->hs_cfg.conditions);
hs_cfg->gpio = adapter->hs_cfg.gpio;
hs_cfg->gap = adapter->hs_cfg.gap;
break;
default:
status = -1;
break;
}
return status;
}
/*
* Sends IOCTL request to set Host Sleep parameters.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action,
u8 wait_option,
struct mwifiex_ds_hs_cfg *hscfg)
{
int ret = 0;
struct mwifiex_wait_queue *wait = NULL;
if (!hscfg)
return -ENOMEM;
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return -ENOMEM;
ret = mwifiex_pm_ioctl_hs_cfg(priv, wait, action, hscfg);
ret = mwifiex_request_ioctl(priv, wait, ret, wait_option);
if (wait && (ret != -EINPROGRESS))
kfree(wait);
return ret;
}
/*
* Sends IOCTL request to cancel the existing Host Sleep configuration.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int mwifiex_cancel_hs(struct mwifiex_private *priv, u8 wait_option)
{
int ret = 0;
struct mwifiex_ds_hs_cfg hscfg;
/* Cancel Host Sleep */
hscfg.conditions = HOST_SLEEP_CFG_CANCEL;
hscfg.is_invoke_hostcmd = true;
ret = mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET,
wait_option, &hscfg);
return ret;
}
EXPORT_SYMBOL_GPL(mwifiex_cancel_hs);
/*
* Sends IOCTL request to cancel the existing Host Sleep configuration.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int mwifiex_enable_hs(struct mwifiex_adapter *adapter)
{
struct mwifiex_ds_hs_cfg hscfg;
if (adapter->hs_activated) {
dev_dbg(adapter->dev, "cmd: HS Already actived\n");
return true;
}
/* Enable Host Sleep */
adapter->hs_activate_wait_q_woken = false;
memset(&hscfg, 0, sizeof(struct mwifiex_hs_config_param));
hscfg.is_invoke_hostcmd = true;
if (mwifiex_set_hs_params(mwifiex_get_priv(adapter,
MWIFIEX_BSS_ROLE_STA),
HostCmd_ACT_GEN_SET,
MWIFIEX_IOCTL_WAIT, &hscfg)) {
dev_err(adapter->dev, "IOCTL request HS enable failed\n");
return false;
}
wait_event_interruptible(adapter->hs_activate_wait_q,
adapter->hs_activate_wait_q_woken);
return true;
}
EXPORT_SYMBOL_GPL(mwifiex_enable_hs);
/*
* IOCTL request handler to get signal information.
*
* This function prepares the correct firmware command and
* issues it to get the signal (RSSI) information.
*
* This only works in the connected mode.
*/
static int mwifiex_get_info_signal(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_ds_get_signal *signal)
{
int ret = 0;
if (!wait) {
dev_err(priv->adapter->dev, "WAIT information is not present\n");
return -1;
}
/* Signal info can be obtained only if connected */
if (!priv->media_connected) {
dev_dbg(priv->adapter->dev,
"info: Can not get signal in disconnected state\n");
return -1;
}
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_RSSI_INFO,
HostCmd_ACT_GEN_GET, 0, wait, signal);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* IOCTL request handler to get statistics.
*
* This function prepares the correct firmware command and
* issues it to get the statistics (RSSI) information.
*/
static int mwifiex_get_info_stats(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_ds_get_stats *log)
{
int ret = 0;
if (!wait) {
dev_err(priv->adapter->dev, "MWIFIEX IOCTL information is not present\n");
return -1;
}
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_GET_LOG,
HostCmd_ACT_GEN_GET, 0, wait, log);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* IOCTL request handler to get BSS information.
*
* This function collates the information from different driver structures
* to send to the user.
*/
int mwifiex_get_bss_info(struct mwifiex_private *priv,
struct mwifiex_bss_info *info)
{
struct mwifiex_adapter *adapter = priv->adapter;
struct mwifiex_bssdescriptor *bss_desc;
s32 tbl_idx = 0;
if (!info)
return -1;
/* Get current BSS info */
bss_desc = &priv->curr_bss_params.bss_descriptor;
/* BSS mode */
info->bss_mode = priv->bss_mode;
/* SSID */
memcpy(&info->ssid, &bss_desc->ssid,
sizeof(struct mwifiex_802_11_ssid));
/* BSSID */
memcpy(&info->bssid, &bss_desc->mac_address, ETH_ALEN);
/* Channel */
info->bss_chan = bss_desc->channel;
/* Region code */
info->region_code = adapter->region_code;
/* Scan table index if connected */
info->scan_table_idx = 0;
if (priv->media_connected) {
tbl_idx =
mwifiex_find_ssid_in_list(priv, &bss_desc->ssid,
bss_desc->mac_address,
priv->bss_mode);
if (tbl_idx >= 0)
info->scan_table_idx = tbl_idx;
}
/* Connection status */
info->media_connected = priv->media_connected;
/* Radio status */
info->radio_on = adapter->radio_on;
/* Tx power information */
info->max_power_level = priv->max_tx_power_level;
info->min_power_level = priv->min_tx_power_level;
/* AdHoc state */
info->adhoc_state = priv->adhoc_state;
/* Last beacon NF */
info->bcn_nf_last = priv->bcn_nf_last;
/* wep status */
if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED)
info->wep_status = true;
else
info->wep_status = false;
info->is_hs_configured = adapter->is_hs_configured;
info->is_deep_sleep = adapter->is_deep_sleep;
return 0;
}
/*
* IOCTL request handler to get extended version information.
*
* This function prepares the correct firmware command and
* issues it to get the extended version information.
*/
static int mwifiex_get_info_ver_ext(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_ver_ext *ver_ext)
{
int ret = 0;
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_VERSION_EXT,
HostCmd_ACT_GEN_GET, 0, wait, ver_ext);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* IOCTL request handler to set/get SNMP MIB parameters.
*
* This function prepares the correct firmware command and
* issues it.
*
* Currently the following parameters are supported -
* Set/get RTS Threshold
* Set/get fragmentation threshold
* Set/get retry count
*/
int mwifiex_snmp_mib_ioctl(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
u32 cmd_oid, u16 action, u32 *value)
{
int ret = 0;
if (!value)
return -1;
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB,
action, cmd_oid, wait, value);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* IOCTL request handler to set/get band configurations.
*
* For SET operation, it performs extra checks to make sure the Ad-Hoc
* band and channel are compatible. Otherwise it returns an error.
*
* For GET operation, this function retrieves the following information -
* - Infra bands
* - Ad-hoc band
* - Ad-hoc channel
* - Secondary channel offset
*/
int mwifiex_radio_ioctl_band_cfg(struct mwifiex_private *priv,
u16 action,
struct mwifiex_ds_band_cfg *radio_cfg)
{
struct mwifiex_adapter *adapter = priv->adapter;
u8 infra_band = 0;
u8 adhoc_band = 0;
u32 adhoc_channel = 0;
if (action == HostCmd_ACT_GEN_GET) {
/* Infra Bands */
radio_cfg->config_bands = adapter->config_bands;
/* Adhoc Band */
radio_cfg->adhoc_start_band = adapter->adhoc_start_band;
/* Adhoc channel */
radio_cfg->adhoc_channel = priv->adhoc_channel;
/* Secondary channel offset */
radio_cfg->sec_chan_offset = adapter->chan_offset;
return 0;
}
/* For action = SET */
infra_band = (u8) radio_cfg->config_bands;
adhoc_band = (u8) radio_cfg->adhoc_start_band;
adhoc_channel = radio_cfg->adhoc_channel;
/* SET Infra band */
if ((infra_band | adapter->fw_bands) & ~adapter->fw_bands)
return -1;
adapter->config_bands = infra_band;
/* SET Ad-hoc Band */
if ((adhoc_band | adapter->fw_bands) & ~adapter->fw_bands)
return -1;
if (adhoc_band)
adapter->adhoc_start_band = adhoc_band;
adapter->chan_offset = (u8) radio_cfg->sec_chan_offset;
/*
* If no adhoc_channel is supplied verify if the existing adhoc
* channel compiles with new adhoc_band
*/
if (!adhoc_channel) {
if (!mwifiex_get_cfp_by_band_and_channel_from_cfg80211
(priv, adapter->adhoc_start_band,
priv->adhoc_channel)) {
/* Pass back the default channel */
radio_cfg->adhoc_channel = DEFAULT_AD_HOC_CHANNEL;
if ((adapter->adhoc_start_band & BAND_A)
|| (adapter->adhoc_start_band & BAND_AN))
radio_cfg->adhoc_channel =
DEFAULT_AD_HOC_CHANNEL_A;
}
} else { /* Retrurn error if adhoc_band and
adhoc_channel combination is invalid */
if (!mwifiex_get_cfp_by_band_and_channel_from_cfg80211
(priv, adapter->adhoc_start_band, (u16) adhoc_channel))
return -1;
priv->adhoc_channel = (u8) adhoc_channel;
}
if ((adhoc_band & BAND_GN) || (adhoc_band & BAND_AN))
adapter->adhoc_11n_enabled = true;
else
adapter->adhoc_11n_enabled = false;
return 0;
}
/*
* IOCTL request handler to set/get active channel.
*
* This function performs validity checking on channel/frequency
* compatibility and returns failure if not valid.
*/
int mwifiex_bss_ioctl_channel(struct mwifiex_private *priv, u16 action,
struct mwifiex_chan_freq_power *chan)
{
struct mwifiex_adapter *adapter = priv->adapter;
struct mwifiex_chan_freq_power *cfp = NULL;
if (!chan)
return -1;
if (action == HostCmd_ACT_GEN_GET) {
cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211(priv,
priv->curr_bss_params.band,
(u16) priv->curr_bss_params.bss_descriptor.
channel);
chan->channel = cfp->channel;
chan->freq = cfp->freq;
return 0;
}
if (!chan->channel && !chan->freq)
return -1;
if (adapter->adhoc_start_band & BAND_AN)
adapter->adhoc_start_band = BAND_G | BAND_B | BAND_GN;
else if (adapter->adhoc_start_band & BAND_A)
adapter->adhoc_start_band = BAND_G | BAND_B;
if (chan->channel) {
if (chan->channel <= MAX_CHANNEL_BAND_BG)
cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211
(priv, 0, (u16) chan->channel);
if (!cfp) {
cfp = mwifiex_get_cfp_by_band_and_channel_from_cfg80211
(priv, BAND_A, (u16) chan->channel);
if (cfp) {
if (adapter->adhoc_11n_enabled)
adapter->adhoc_start_band = BAND_A
| BAND_AN;
else
adapter->adhoc_start_band = BAND_A;
}
}
} else {
if (chan->freq <= MAX_FREQUENCY_BAND_BG)
cfp = mwifiex_get_cfp_by_band_and_freq_from_cfg80211(
priv, 0, chan->freq);
if (!cfp) {
cfp = mwifiex_get_cfp_by_band_and_freq_from_cfg80211
(priv, BAND_A, chan->freq);
if (cfp) {
if (adapter->adhoc_11n_enabled)
adapter->adhoc_start_band = BAND_A
| BAND_AN;
else
adapter->adhoc_start_band = BAND_A;
}
}
}
if (!cfp || !cfp->channel) {
dev_err(adapter->dev, "invalid channel/freq\n");
return -1;
}
priv->adhoc_channel = (u8) cfp->channel;
chan->channel = cfp->channel;
chan->freq = cfp->freq;
return 0;
}
/*
* IOCTL request handler to set/get BSS mode.
*
* This function prepares the correct firmware command and
* issues it to set or get the BSS mode.
*
* In case the mode is changed, a deauthentication is performed
* first by the function automatically.
*/
int mwifiex_bss_ioctl_mode(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
u16 action, int *mode)
{
int ret = 0;
if (!mode)
return -1;
if (action == HostCmd_ACT_GEN_GET) {
*mode = priv->bss_mode;
return 0;
}
if ((priv->bss_mode == *mode) || (*mode == MWIFIEX_BSS_MODE_AUTO)) {
dev_dbg(priv->adapter->dev,
"info: Already set to required mode! No change!\n");
priv->bss_mode = *mode;
return 0;
}
ret = mwifiex_deauthenticate(priv, wait, NULL);
priv->sec_info.authentication_mode = MWIFIEX_AUTH_MODE_OPEN;
priv->bss_mode = *mode;
if (priv->bss_mode != MWIFIEX_BSS_MODE_AUTO) {
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
HostCmd_ACT_GEN_SET, 0, wait, NULL);
if (!ret)
ret = -EINPROGRESS;
}
return ret;
}
/*
* IOCTL request handler to set/get Ad-Hoc channel.
*
* This function prepares the correct firmware command and
* issues it to set or get the ad-hoc channel.
*/
static int mwifiex_bss_ioctl_ibss_channel(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
u16 action, u16 *channel)
{
int ret = 0;
if (action == HostCmd_ACT_GEN_GET) {
if (!priv->media_connected) {
*channel = priv->adhoc_channel;
return ret;
}
} else {
priv->adhoc_channel = (u8) *channel;
}
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_RF_CHANNEL,
action, 0, wait, channel);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* IOCTL request handler to find a particular BSS.
*
* The BSS can be searched with either a BSSID or a SSID. If none of
* these are provided, just the best BSS (best RSSI) is returned.
*/
int mwifiex_bss_ioctl_find_bss(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_ssid_bssid *ssid_bssid)
{
struct mwifiex_adapter *adapter = priv->adapter;
int ret = 0;
struct mwifiex_bssdescriptor *bss_desc;
u8 zero_mac[ETH_ALEN] = { 0, 0, 0, 0, 0, 0 };
u8 mac[ETH_ALEN];
int i = 0;
if (memcmp(ssid_bssid->bssid, zero_mac, sizeof(zero_mac))) {
i = mwifiex_find_bssid_in_list(priv,
(u8 *) ssid_bssid->bssid,
priv->bss_mode);
if (i < 0) {
memcpy(mac, ssid_bssid->bssid, sizeof(mac));
dev_err(adapter->dev, "cannot find bssid %pM\n", mac);
return -1;
}
bss_desc = &adapter->scan_table[i];
memcpy(&ssid_bssid->ssid, &bss_desc->ssid,
sizeof(struct mwifiex_802_11_ssid));
} else if (ssid_bssid->ssid.ssid_len) {
i = mwifiex_find_ssid_in_list(priv, &ssid_bssid->ssid, NULL,
priv->bss_mode);
if (i < 0) {
dev_err(adapter->dev, "cannot find ssid %s\n",
ssid_bssid->ssid.ssid);
return -1;
}
bss_desc = &adapter->scan_table[i];
memcpy(ssid_bssid->bssid, bss_desc->mac_address, ETH_ALEN);
} else {
ret = mwifiex_find_best_network(priv, ssid_bssid);
}
return ret;
}
/*
* IOCTL request handler to change Ad-Hoc channel.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*
* The function follows the following steps to perform the change -
* - Get current IBSS information
* - Get current channel
* - If no change is required, return
* - If not connected, change channel and return
* - If connected,
* - Disconnect
* - Change channel
* - Perform specific SSID scan with same SSID
* - Start/Join the IBSS
*/
int
mwifiex_drv_change_adhoc_chan(struct mwifiex_private *priv, int channel)
{
int ret = 0;
int status = 0;
struct mwifiex_bss_info bss_info;
struct mwifiex_wait_queue *wait = NULL;
u8 wait_option = MWIFIEX_IOCTL_WAIT;
struct mwifiex_ssid_bssid ssid_bssid;
u16 curr_chan = 0;
memset(&bss_info, 0, sizeof(bss_info));
/* Get BSS information */
if (mwifiex_get_bss_info(priv, &bss_info))
return -1;
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return -ENOMEM;
/* Get current channel */
status = mwifiex_bss_ioctl_ibss_channel(priv, wait, HostCmd_ACT_GEN_GET,
&curr_chan);
if (mwifiex_request_ioctl(priv, wait, status, wait_option)) {
ret = -1;
goto done;
}
if (curr_chan == channel) {
ret = 0;
goto done;
}
dev_dbg(priv->adapter->dev, "cmd: updating channel from %d to %d\n",
curr_chan, channel);
if (!bss_info.media_connected) {
ret = 0;
goto done;
}
/* Do disonnect */
memset(&ssid_bssid, 0, ETH_ALEN);
status = mwifiex_bss_ioctl_stop(priv, wait, ssid_bssid.bssid);
if (mwifiex_request_ioctl(priv, wait, status, wait_option)) {
ret = -1;
goto done;
}
status = mwifiex_bss_ioctl_ibss_channel(priv, wait, HostCmd_ACT_GEN_SET,
(u16 *) &channel);
if (mwifiex_request_ioctl(priv, wait, status, wait_option)) {
ret = -1;
goto done;
}
/* Do specific SSID scanning */
if (mwifiex_request_scan(priv, wait_option, &bss_info.ssid)) {
ret = -1;
goto done;
}
/* Start/Join Adhoc network */
memset(&ssid_bssid, 0, sizeof(struct mwifiex_ssid_bssid));
memcpy(&ssid_bssid.ssid, &bss_info.ssid,
sizeof(struct mwifiex_802_11_ssid));
status = mwifiex_bss_ioctl_start(priv, wait, &ssid_bssid);
if (mwifiex_request_ioctl(priv, wait, status, wait_option))
ret = -1;
done:
kfree(wait);
return ret;
}
/*
* IOCTL request handler to get current driver mode.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int
mwifiex_drv_get_mode(struct mwifiex_private *priv, u8 wait_option)
{
struct mwifiex_wait_queue *wait = NULL;
int status = 0;
int mode = -1;
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return -1;
status = mwifiex_bss_ioctl_mode(priv, wait, HostCmd_ACT_GEN_GET, &mode);
status = mwifiex_request_ioctl(priv, wait, status, wait_option);
if (wait && (status != -EINPROGRESS))
kfree(wait);
return mode;
}
/*
* IOCTL request handler to get rate.
*
* This function prepares the correct firmware command and
* issues it to get the current rate if it is connected,
* otherwise, the function returns the lowest supported rate
* for the band.
*/
static int mwifiex_rate_ioctl_get_rate_value(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_rate_cfg *rate_cfg)
{
struct mwifiex_adapter *adapter = priv->adapter;
int ret = 0;
rate_cfg->is_rate_auto = priv->is_data_rate_auto;
if (!priv->media_connected) {
switch (adapter->config_bands) {
case BAND_B:
/* Return the lowest supported rate for B band */
rate_cfg->rate = supported_rates_b[0] & 0x7f;
break;
case BAND_G:
case BAND_G | BAND_GN:
/* Return the lowest supported rate for G band */
rate_cfg->rate = supported_rates_g[0] & 0x7f;
break;
case BAND_B | BAND_G:
case BAND_A | BAND_B | BAND_G:
case BAND_A | BAND_B:
case BAND_A | BAND_B | BAND_G | BAND_AN | BAND_GN:
case BAND_B | BAND_G | BAND_GN:
/* Return the lowest supported rate for BG band */
rate_cfg->rate = supported_rates_bg[0] & 0x7f;
break;
case BAND_A:
case BAND_A | BAND_G:
case BAND_A | BAND_G | BAND_AN | BAND_GN:
case BAND_A | BAND_AN:
/* Return the lowest supported rate for A band */
rate_cfg->rate = supported_rates_a[0] & 0x7f;
break;
case BAND_GN:
/* Return the lowest supported rate for N band */
rate_cfg->rate = supported_rates_n[0] & 0x7f;
break;
default:
dev_warn(adapter->dev, "invalid band %#x\n",
adapter->config_bands);
break;
}
} else {
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv,
HostCmd_CMD_802_11_TX_RATE_QUERY,
HostCmd_ACT_GEN_GET, 0, wait, NULL);
if (!ret)
ret = -EINPROGRESS;
}
return ret;
}
/*
* IOCTL request handler to set rate.
*
* This function prepares the correct firmware command and
* issues it to set the current rate.
*
* The function also performs validation checking on the supplied value.
*/
static int mwifiex_rate_ioctl_set_rate_value(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_rate_cfg *rate_cfg)
{
u8 rates[MWIFIEX_SUPPORTED_RATES];
u8 *rate = NULL;
int rate_index = 0;
u16 bitmap_rates[MAX_BITMAP_RATES_SIZE];
u32 i = 0;
int ret = 0;
struct mwifiex_adapter *adapter = priv->adapter;
if (rate_cfg->is_rate_auto) {
memset(bitmap_rates, 0, sizeof(bitmap_rates));
/* Support all HR/DSSS rates */
bitmap_rates[0] = 0x000F;
/* Support all OFDM rates */
bitmap_rates[1] = 0x00FF;
/* Support all HT-MCSs rate */
for (i = 0; i < ARRAY_SIZE(priv->bitmap_rates) - 3; i++)
bitmap_rates[i + 2] = 0xFFFF;
bitmap_rates[9] = 0x3FFF;
} else {
memset(rates, 0, sizeof(rates));
mwifiex_get_active_data_rates(priv, rates);
rate = rates;
for (i = 0; (rate[i] && i < MWIFIEX_SUPPORTED_RATES); i++) {
dev_dbg(adapter->dev, "info: rate=%#x wanted=%#x\n",
rate[i], rate_cfg->rate);
if ((rate[i] & 0x7f) == (rate_cfg->rate & 0x7f))
break;
}
if (!rate[i] || (i == MWIFIEX_SUPPORTED_RATES)) {
dev_err(adapter->dev, "fixed data rate %#x is out "
"of range\n", rate_cfg->rate);
return -1;
}
memset(bitmap_rates, 0, sizeof(bitmap_rates));
rate_index =
mwifiex_data_rate_to_index(adapter, rate_cfg->rate);
/* Only allow b/g rates to be set */
if (rate_index >= MWIFIEX_RATE_INDEX_HRDSSS0 &&
rate_index <= MWIFIEX_RATE_INDEX_HRDSSS3) {
bitmap_rates[0] = 1 << rate_index;
} else {
rate_index -= 1; /* There is a 0x00 in the table */
if (rate_index >= MWIFIEX_RATE_INDEX_OFDM0 &&
rate_index <= MWIFIEX_RATE_INDEX_OFDM7)
bitmap_rates[1] = 1 << (rate_index -
MWIFIEX_RATE_INDEX_OFDM0);
}
}
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_TX_RATE_CFG,
HostCmd_ACT_GEN_SET, 0, wait, bitmap_rates);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* IOCTL request handler to set/get rate.
*
* This function can be used to set/get either the rate value or the
* rate index.
*/
static int mwifiex_rate_ioctl_cfg(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_rate_cfg *rate_cfg)
{
int status = 0;
if (!rate_cfg)
return -1;
if (rate_cfg->action == HostCmd_ACT_GEN_GET)
status = mwifiex_rate_ioctl_get_rate_value(
priv, wait, rate_cfg);
else
status = mwifiex_rate_ioctl_set_rate_value(
priv, wait, rate_cfg);
return status;
}
/*
* Sends IOCTL request to get the data rate.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int mwifiex_drv_get_data_rate(struct mwifiex_private *priv,
struct mwifiex_rate_cfg *rate)
{
int ret = 0;
struct mwifiex_wait_queue *wait = NULL;
u8 wait_option = MWIFIEX_IOCTL_WAIT;
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return -ENOMEM;
memset(rate, 0, sizeof(struct mwifiex_rate_cfg));
rate->action = HostCmd_ACT_GEN_GET;
ret = mwifiex_rate_ioctl_cfg(priv, wait, rate);
ret = mwifiex_request_ioctl(priv, wait, ret, wait_option);
if (!ret) {
if (rate && rate->is_rate_auto)
rate->rate = mwifiex_index_to_data_rate(priv->adapter,
priv->tx_rate, priv->tx_htinfo);
else if (rate)
rate->rate = priv->data_rate;
} else {
ret = -1;
}
kfree(wait);
return ret;
}
/*
* IOCTL request handler to set tx power configuration.
*
* This function prepares the correct firmware command and
* issues it.
*
* For non-auto power mode, all the following power groups are set -
* - Modulation class HR/DSSS
* - Modulation class OFDM
* - Modulation class HTBW20
* - Modulation class HTBW40
*/
static int mwifiex_power_ioctl_set_power(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_power_cfg *power_cfg)
{
int ret = 0;
struct host_cmd_ds_txpwr_cfg *txp_cfg = NULL;
struct mwifiex_types_power_group *pg_tlv = NULL;
struct mwifiex_power_group *pg = NULL;
u8 *buf = NULL;
u16 dbm = 0;
if (!power_cfg->is_power_auto) {
dbm = (u16) power_cfg->power_level;
if ((dbm < priv->min_tx_power_level) ||
(dbm > priv->max_tx_power_level)) {
dev_err(priv->adapter->dev, "txpower value %d dBm"
" is out of range (%d dBm-%d dBm)\n",
dbm, priv->min_tx_power_level,
priv->max_tx_power_level);
return -1;
}
}
buf = kzalloc(MWIFIEX_SIZE_OF_CMD_BUFFER, GFP_KERNEL);
if (!buf) {
dev_err(priv->adapter->dev, "%s: failed to alloc cmd buffer\n",
__func__);
return -1;
}
txp_cfg = (struct host_cmd_ds_txpwr_cfg *) buf;
txp_cfg->action = cpu_to_le16(HostCmd_ACT_GEN_SET);
if (!power_cfg->is_power_auto) {
txp_cfg->mode = cpu_to_le32(1);
pg_tlv = (struct mwifiex_types_power_group *) (buf +
sizeof(struct host_cmd_ds_txpwr_cfg));
pg_tlv->type = TLV_TYPE_POWER_GROUP;
pg_tlv->length = 4 * sizeof(struct mwifiex_power_group);
pg = (struct mwifiex_power_group *) (buf +
sizeof(struct host_cmd_ds_txpwr_cfg) +
sizeof(struct mwifiex_types_power_group));
/* Power group for modulation class HR/DSSS */
pg->first_rate_code = 0x00;
pg->last_rate_code = 0x03;
pg->modulation_class = MOD_CLASS_HR_DSSS;
pg->power_step = 0;
pg->power_min = (s8) dbm;
pg->power_max = (s8) dbm;
pg++;
/* Power group for modulation class OFDM */
pg->first_rate_code = 0x00;
pg->last_rate_code = 0x07;
pg->modulation_class = MOD_CLASS_OFDM;
pg->power_step = 0;
pg->power_min = (s8) dbm;
pg->power_max = (s8) dbm;
pg++;
/* Power group for modulation class HTBW20 */
pg->first_rate_code = 0x00;
pg->last_rate_code = 0x20;
pg->modulation_class = MOD_CLASS_HT;
pg->power_step = 0;
pg->power_min = (s8) dbm;
pg->power_max = (s8) dbm;
pg->ht_bandwidth = HT_BW_20;
pg++;
/* Power group for modulation class HTBW40 */
pg->first_rate_code = 0x00;
pg->last_rate_code = 0x20;
pg->modulation_class = MOD_CLASS_HT;
pg->power_step = 0;
pg->power_min = (s8) dbm;
pg->power_max = (s8) dbm;
pg->ht_bandwidth = HT_BW_40;
}
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_TXPWR_CFG,
HostCmd_ACT_GEN_SET, 0, wait, buf);
if (!ret)
ret = -EINPROGRESS;
kfree(buf);
return ret;
}
/*
* IOCTL request handler to get power save mode.
*
* This function prepares the correct firmware command and
* issues it.
*/
static int mwifiex_pm_ioctl_ps_mode(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
u32 *ps_mode, u16 action)
{
int ret = 0;
struct mwifiex_adapter *adapter = priv->adapter;
u16 sub_cmd;
if (action == HostCmd_ACT_GEN_SET) {
if (*ps_mode)
adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_PSP;
else
adapter->ps_mode = MWIFIEX_802_11_POWER_MODE_CAM;
sub_cmd = (*ps_mode) ? EN_AUTO_PS : DIS_AUTO_PS;
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
sub_cmd, BITMAP_STA_PS, wait, NULL);
if ((!ret) && (sub_cmd == DIS_AUTO_PS))
ret = mwifiex_prepare_cmd(priv,
HostCmd_CMD_802_11_PS_MODE_ENH, GET_PS,
0, NULL, NULL);
} else {
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_PS_MODE_ENH,
GET_PS, 0, wait, NULL);
}
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* IOCTL request handler to set/reset WPA IE.
*
* The supplied WPA IE is treated as a opaque buffer. Only the first field
* is checked to determine WPA version. If buffer length is zero, the existing
* WPA IE is reset.
*/
static int mwifiex_set_wpa_ie_helper(struct mwifiex_private *priv,
u8 *ie_data_ptr, u16 ie_len)
{
if (ie_len) {
if (ie_len > sizeof(priv->wpa_ie)) {
dev_err(priv->adapter->dev,
"failed to copy WPA IE, too big\n");
return -1;
}
memcpy(priv->wpa_ie, ie_data_ptr, ie_len);
priv->wpa_ie_len = (u8) ie_len;
dev_dbg(priv->adapter->dev, "cmd: Set Wpa_ie_len=%d IE=%#x\n",
priv->wpa_ie_len, priv->wpa_ie[0]);
if (priv->wpa_ie[0] == WLAN_EID_WPA) {
priv->sec_info.wpa_enabled = true;
} else if (priv->wpa_ie[0] == WLAN_EID_RSN) {
priv->sec_info.wpa2_enabled = true;
} else {
priv->sec_info.wpa_enabled = false;
priv->sec_info.wpa2_enabled = false;
}
} else {
memset(priv->wpa_ie, 0, sizeof(priv->wpa_ie));
priv->wpa_ie_len = 0;
dev_dbg(priv->adapter->dev, "info: reset wpa_ie_len=%d IE=%#x\n",
priv->wpa_ie_len, priv->wpa_ie[0]);
priv->sec_info.wpa_enabled = false;
priv->sec_info.wpa2_enabled = false;
}
return 0;
}
/*
* IOCTL request handler to set/reset WAPI IE.
*
* The supplied WAPI IE is treated as a opaque buffer. Only the first field
* is checked to internally enable WAPI. If buffer length is zero, the existing
* WAPI IE is reset.
*/
static int mwifiex_set_wapi_ie(struct mwifiex_private *priv,
u8 *ie_data_ptr, u16 ie_len)
{
if (ie_len) {
if (ie_len > sizeof(priv->wapi_ie)) {
dev_dbg(priv->adapter->dev,
"info: failed to copy WAPI IE, too big\n");
return -1;
}
memcpy(priv->wapi_ie, ie_data_ptr, ie_len);
priv->wapi_ie_len = ie_len;
dev_dbg(priv->adapter->dev, "cmd: Set wapi_ie_len=%d IE=%#x\n",
priv->wapi_ie_len, priv->wapi_ie[0]);
if (priv->wapi_ie[0] == WLAN_EID_BSS_AC_ACCESS_DELAY)
priv->sec_info.wapi_enabled = true;
} else {
memset(priv->wapi_ie, 0, sizeof(priv->wapi_ie));
priv->wapi_ie_len = ie_len;
dev_dbg(priv->adapter->dev,
"info: Reset wapi_ie_len=%d IE=%#x\n",
priv->wapi_ie_len, priv->wapi_ie[0]);
priv->sec_info.wapi_enabled = false;
}
return 0;
}
/*
* IOCTL request handler to set WAPI key.
*
* This function prepares the correct firmware command and
* issues it.
*/
static int mwifiex_sec_ioctl_set_wapi_key(struct mwifiex_adapter *adapter,
struct mwifiex_wait_queue *wait,
struct mwifiex_ds_encrypt_key *encrypt_key)
{
int ret = 0;
struct mwifiex_private *priv = adapter->priv[wait->bss_index];
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
wait, encrypt_key);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* IOCTL request handler to set WEP network key.
*
* This function prepares the correct firmware command and
* issues it, after validation checks.
*/
static int mwifiex_sec_ioctl_set_wep_key(struct mwifiex_adapter *adapter,
struct mwifiex_wait_queue *wait,
struct mwifiex_ds_encrypt_key *encrypt_key)
{
int ret = 0;
struct mwifiex_private *priv = adapter->priv[wait->bss_index];
struct mwifiex_wep_key *wep_key = NULL;
int index;
if (priv->wep_key_curr_index >= NUM_WEP_KEYS)
priv->wep_key_curr_index = 0;
wep_key = &priv->wep_key[priv->wep_key_curr_index];
index = encrypt_key->key_index;
if (encrypt_key->key_disable) {
priv->sec_info.wep_status = MWIFIEX_802_11_WEP_DISABLED;
} else if (!encrypt_key->key_len) {
/* Copy the required key as the current key */
wep_key = &priv->wep_key[index];
if (!wep_key->key_length) {
dev_err(adapter->dev,
"key not set, so cannot enable it\n");
return -1;
}
priv->wep_key_curr_index = (u16) index;
priv->sec_info.wep_status = MWIFIEX_802_11_WEP_ENABLED;
} else {
wep_key = &priv->wep_key[index];
/* Cleanup */
memset(wep_key, 0, sizeof(struct mwifiex_wep_key));
/* Copy the key in the driver */
memcpy(wep_key->key_material,
encrypt_key->key_material,
encrypt_key->key_len);
wep_key->key_index = index;
wep_key->key_length = encrypt_key->key_len;
priv->sec_info.wep_status = MWIFIEX_802_11_WEP_ENABLED;
}
if (wep_key->key_length) {
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
HostCmd_ACT_GEN_SET, 0, NULL, NULL);
if (ret)
return ret;
}
if (priv->sec_info.wep_status == MWIFIEX_802_11_WEP_ENABLED)
priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
else
priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_MAC_CONTROL,
HostCmd_ACT_GEN_SET, 0, wait,
&priv->curr_pkt_filter);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* IOCTL request handler to set WPA key.
*
* This function prepares the correct firmware command and
* issues it, after validation checks.
*
* Current driver only supports key length of up to 32 bytes.
*
* This function can also be used to disable a currently set key.
*/
static int mwifiex_sec_ioctl_set_wpa_key(struct mwifiex_adapter *adapter,
struct mwifiex_wait_queue *wait,
struct mwifiex_ds_encrypt_key *encrypt_key)
{
int ret = 0;
struct mwifiex_private *priv = adapter->priv[wait->bss_index];
u8 remove_key = false;
struct host_cmd_ds_802_11_key_material *ibss_key;
/* Current driver only supports key length of up to 32 bytes */
if (encrypt_key->key_len > MWIFIEX_MAX_KEY_LENGTH) {
dev_err(adapter->dev, "key length too long\n");
return -1;
}
if (priv->bss_mode == MWIFIEX_BSS_MODE_IBSS) {
/*
* IBSS/WPA-None uses only one key (Group) for both receiving
* and sending unicast and multicast packets.
*/
/* Send the key as PTK to firmware */
encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
NULL, encrypt_key);
if (ret)
return ret;
ibss_key = &priv->aes_key;
memset(ibss_key, 0,
sizeof(struct host_cmd_ds_802_11_key_material));
/* Copy the key in the driver */
memcpy(ibss_key->key_param_set.key, encrypt_key->key_material,
encrypt_key->key_len);
memcpy(&ibss_key->key_param_set.key_len, &encrypt_key->key_len,
sizeof(ibss_key->key_param_set.key_len));
ibss_key->key_param_set.key_type_id
= cpu_to_le16(KEY_TYPE_ID_TKIP);
ibss_key->key_param_set.key_info
= cpu_to_le16(KEY_INFO_TKIP_ENABLED);
/* Send the key as GTK to firmware */
encrypt_key->key_index = ~MWIFIEX_KEY_INDEX_UNICAST;
}
if (!encrypt_key->key_index)
encrypt_key->key_index = MWIFIEX_KEY_INDEX_UNICAST;
if (remove_key)
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
HostCmd_ACT_GEN_SET,
!(KEY_INFO_ENABLED),
wait, encrypt_key);
else
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_KEY_MATERIAL,
HostCmd_ACT_GEN_SET, KEY_INFO_ENABLED,
wait, encrypt_key);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* IOCTL request handler to set/get network keys.
*
* This is a generic key handling function which supports WEP, WPA
* and WAPI.
*/
static int
mwifiex_sec_ioctl_encrypt_key(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_ds_encrypt_key *encrypt_key)
{
int status = 0;
struct mwifiex_adapter *adapter = priv->adapter;
if (encrypt_key->is_wapi_key)
status = mwifiex_sec_ioctl_set_wapi_key(adapter, wait,
encrypt_key);
else if (encrypt_key->key_len > WLAN_KEY_LEN_WEP104)
status = mwifiex_sec_ioctl_set_wpa_key(adapter, wait,
encrypt_key);
else
status = mwifiex_sec_ioctl_set_wep_key(adapter, wait,
encrypt_key);
return status;
}
/*
* This function returns the driver version.
*/
int
mwifiex_drv_get_driver_version(struct mwifiex_adapter *adapter, char *version,
int max_len)
{
union {
u32 l;
u8 c[4];
} ver;
char fw_ver[32];
ver.l = adapter->fw_release_number;
sprintf(fw_ver, "%u.%u.%u.p%u", ver.c[2], ver.c[1], ver.c[0], ver.c[3]);
snprintf(version, max_len, driver_version, fw_ver);
dev_dbg(adapter->dev, "info: MWIFIEX VERSION: %s\n", version);
return 0;
}
/*
* Sends IOCTL request to set Tx power. It can be set to either auto
* or a fixed value.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int
mwifiex_set_tx_power(struct mwifiex_private *priv, int type, int dbm)
{
struct mwifiex_power_cfg power_cfg;
struct mwifiex_wait_queue *wait = NULL;
int status = 0;
int ret = 0;
wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT);
if (!wait)
return -ENOMEM;
if (type == NL80211_TX_POWER_FIXED) {
power_cfg.is_power_auto = 0;
power_cfg.power_level = dbm;
} else {
power_cfg.is_power_auto = 1;
}
status = mwifiex_power_ioctl_set_power(priv, wait, &power_cfg);
ret = mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT);
kfree(wait);
return ret;
}
/*
* Sends IOCTL request to get scan table.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int mwifiex_get_scan_table(struct mwifiex_private *priv, u8 wait_option,
struct mwifiex_scan_resp *scan_resp)
{
struct mwifiex_wait_queue *wait = NULL;
struct mwifiex_scan_resp scan;
int status = 0;
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return -ENOMEM;
status = mwifiex_scan_networks(priv, wait, HostCmd_ACT_GEN_GET,
NULL, &scan);
status = mwifiex_request_ioctl(priv, wait, status, wait_option);
if (!status) {
if (scan_resp)
memcpy(scan_resp, &scan,
sizeof(struct mwifiex_scan_resp));
}
if (wait && (status != -EINPROGRESS))
kfree(wait);
return status;
}
/*
* Sends IOCTL request to get signal information.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int mwifiex_get_signal_info(struct mwifiex_private *priv, u8 wait_option,
struct mwifiex_ds_get_signal *signal)
{
struct mwifiex_ds_get_signal info;
struct mwifiex_wait_queue *wait = NULL;
int status = 0;
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return -ENOMEM;
info.selector = ALL_RSSI_INFO_MASK;
status = mwifiex_get_info_signal(priv, wait, &info);
status = mwifiex_request_ioctl(priv, wait, status, wait_option);
if (!status) {
if (signal)
memcpy(signal, &info,
sizeof(struct mwifiex_ds_get_signal));
if (info.selector & BCN_RSSI_AVG_MASK)
priv->w_stats.qual.level = info.bcn_rssi_avg;
if (info.selector & BCN_NF_AVG_MASK)
priv->w_stats.qual.noise = info.bcn_nf_avg;
}
if (wait && (status != -EINPROGRESS))
kfree(wait);
return status;
}
/*
* Sends IOCTL request to set encoding parameters.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int mwifiex_set_encode(struct mwifiex_private *priv, const u8 *key,
int key_len, u8 key_index, int disable)
{
struct mwifiex_wait_queue *wait = NULL;
struct mwifiex_ds_encrypt_key encrypt_key;
int status = 0;
int ret = 0;
wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT);
if (!wait)
return -ENOMEM;
memset(&encrypt_key, 0, sizeof(struct mwifiex_ds_encrypt_key));
encrypt_key.key_len = key_len;
if (!disable) {
encrypt_key.key_index = key_index;
if (key_len)
memcpy(encrypt_key.key_material, key, key_len);
} else {
encrypt_key.key_disable = true;
}
status = mwifiex_sec_ioctl_encrypt_key(priv, wait, &encrypt_key);
if (mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT))
ret = -EFAULT;
kfree(wait);
return ret;
}
/*
* Sends IOCTL request to set power management parameters.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int
mwifiex_drv_set_power(struct mwifiex_private *priv, bool power_on)
{
int ret = 0;
int status = 0;
struct mwifiex_wait_queue *wait = NULL;
u32 ps_mode;
wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT);
if (!wait)
return -ENOMEM;
ps_mode = power_on;
status = mwifiex_pm_ioctl_ps_mode(priv, wait, &ps_mode,
HostCmd_ACT_GEN_SET);
ret = mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT);
kfree(wait);
return ret;
}
/*
* Sends IOCTL request to get extended version.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int
mwifiex_get_ver_ext(struct mwifiex_private *priv)
{
struct mwifiex_ver_ext ver_ext;
struct mwifiex_wait_queue *wait = NULL;
int status = 0;
int ret = 0;
u8 wait_option = MWIFIEX_IOCTL_WAIT;
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return -ENOMEM;
/* get fw version */
memset(&ver_ext, 0, sizeof(struct host_cmd_ds_version_ext));
status = mwifiex_get_info_ver_ext(priv, wait, &ver_ext);
ret = mwifiex_request_ioctl(priv, wait, status, wait_option);
if (ret)
ret = -1;
kfree(wait);
return ret;
}
/*
* Sends IOCTL request to get statistics information.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int
mwifiex_get_stats_info(struct mwifiex_private *priv,
struct mwifiex_ds_get_stats *log)
{
int ret = 0;
int status = 0;
struct mwifiex_wait_queue *wait = NULL;
struct mwifiex_ds_get_stats get_log;
u8 wait_option = MWIFIEX_IOCTL_WAIT;
/* Allocate wait buffer */
wait = mwifiex_alloc_fill_wait_queue(priv, wait_option);
if (!wait)
return -ENOMEM;
memset(&get_log, 0, sizeof(struct mwifiex_ds_get_stats));
status = mwifiex_get_info_stats(priv, wait, &get_log);
/* Send IOCTL request to MWIFIEX */
ret = mwifiex_request_ioctl(priv, wait, status, wait_option);
if (!ret) {
if (log)
memcpy(log, &get_log, sizeof(struct
mwifiex_ds_get_stats));
priv->w_stats.discard.fragment = get_log.fcs_error;
priv->w_stats.discard.retries = get_log.retry;
priv->w_stats.discard.misc = get_log.ack_failure;
}
kfree(wait);
return ret;
}
/*
* IOCTL request handler to read/write register.
*
* This function prepares the correct firmware command and
* issues it.
*
* Access to the following registers are supported -
* - MAC
* - BBP
* - RF
* - PMIC
* - CAU
*/
static int mwifiex_reg_mem_ioctl_reg_rw(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_ds_reg_rw *reg_rw,
u16 action)
{
int ret = 0;
u16 cmd_no;
switch (le32_to_cpu(reg_rw->type)) {
case MWIFIEX_REG_MAC:
cmd_no = HostCmd_CMD_MAC_REG_ACCESS;
break;
case MWIFIEX_REG_BBP:
cmd_no = HostCmd_CMD_BBP_REG_ACCESS;
break;
case MWIFIEX_REG_RF:
cmd_no = HostCmd_CMD_RF_REG_ACCESS;
break;
case MWIFIEX_REG_PMIC:
cmd_no = HostCmd_CMD_PMIC_REG_ACCESS;
break;
case MWIFIEX_REG_CAU:
cmd_no = HostCmd_CMD_CAU_REG_ACCESS;
break;
default:
return -1;
}
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, cmd_no, action, 0, wait, reg_rw);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* Sends IOCTL request to write to a register.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int
mwifiex_reg_write(struct mwifiex_private *priv, u32 reg_type,
u32 reg_offset, u32 reg_value)
{
int ret = 0;
int status = 0;
struct mwifiex_wait_queue *wait = NULL;
struct mwifiex_ds_reg_rw reg_rw;
wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT);
if (!wait)
return -ENOMEM;
reg_rw.type = cpu_to_le32(reg_type);
reg_rw.offset = cpu_to_le32(reg_offset);
reg_rw.value = cpu_to_le32(reg_value);
status = mwifiex_reg_mem_ioctl_reg_rw(priv, wait, &reg_rw,
HostCmd_ACT_GEN_SET);
ret = mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT);
kfree(wait);
return ret;
}
/*
* Sends IOCTL request to read from a register.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int
mwifiex_reg_read(struct mwifiex_private *priv, u32 reg_type,
u32 reg_offset, u32 *value)
{
int ret = 0;
int status = 0;
struct mwifiex_wait_queue *wait = NULL;
struct mwifiex_ds_reg_rw reg_rw;
wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT);
if (!wait)
return -ENOMEM;
reg_rw.type = cpu_to_le32(reg_type);
reg_rw.offset = cpu_to_le32(reg_offset);
status = mwifiex_reg_mem_ioctl_reg_rw(priv, wait, &reg_rw,
HostCmd_ACT_GEN_GET);
ret = mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT);
if (ret)
goto done;
*value = le32_to_cpu(reg_rw.value);
done:
kfree(wait);
return ret;
}
/*
* IOCTL request handler to read EEPROM.
*
* This function prepares the correct firmware command and
* issues it.
*/
static int
mwifiex_reg_mem_ioctl_read_eeprom(struct mwifiex_private *priv,
struct mwifiex_wait_queue *wait,
struct mwifiex_ds_read_eeprom *rd_eeprom)
{
int ret = 0;
/* Send request to firmware */
ret = mwifiex_prepare_cmd(priv, HostCmd_CMD_802_11_EEPROM_ACCESS,
HostCmd_ACT_GEN_GET, 0, wait, rd_eeprom);
if (!ret)
ret = -EINPROGRESS;
return ret;
}
/*
* Sends IOCTL request to read from EEPROM.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int
mwifiex_eeprom_read(struct mwifiex_private *priv, u16 offset, u16 bytes,
u8 *value)
{
int ret = 0;
int status = 0;
struct mwifiex_wait_queue *wait = NULL;
struct mwifiex_ds_read_eeprom rd_eeprom;
wait = mwifiex_alloc_fill_wait_queue(priv, MWIFIEX_IOCTL_WAIT);
if (!wait)
return -ENOMEM;
rd_eeprom.offset = cpu_to_le16((u16) offset);
rd_eeprom.byte_count = cpu_to_le16((u16) bytes);
status = mwifiex_reg_mem_ioctl_read_eeprom(priv, wait, &rd_eeprom);
ret = mwifiex_request_ioctl(priv, wait, status, MWIFIEX_IOCTL_WAIT);
if (ret)
goto done;
memcpy(value, rd_eeprom.value, MAX_EEPROM_DATA);
done:
kfree(wait);
return ret;
}
/*
* This function sets a generic IE. In addition to generic IE, it can
* also handle WPA, WPA2 and WAPI IEs.
*/
static int
mwifiex_set_gen_ie_helper(struct mwifiex_private *priv, u8 *ie_data_ptr,
u16 ie_len)
{
int ret = 0;
struct ieee_types_vendor_header *pvendor_ie;
const u8 wpa_oui[] = { 0x00, 0x50, 0xf2, 0x01 };
const u8 wps_oui[] = { 0x00, 0x50, 0xf2, 0x04 };
/* If the passed length is zero, reset the buffer */
if (!ie_len) {
priv->gen_ie_buf_len = 0;
priv->wps.session_enable = false;
return 0;
} else if (!ie_data_ptr) {
return -1;
}
pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr;
/* Test to see if it is a WPA IE, if not, then it is a gen IE */
if (((pvendor_ie->element_id == WLAN_EID_WPA)
&& (!memcmp(pvendor_ie->oui, wpa_oui, sizeof(wpa_oui))))
|| (pvendor_ie->element_id == WLAN_EID_RSN)) {
/* IE is a WPA/WPA2 IE so call set_wpa function */
ret = mwifiex_set_wpa_ie_helper(priv, ie_data_ptr, ie_len);
priv->wps.session_enable = false;
return ret;
} else if (pvendor_ie->element_id == WLAN_EID_BSS_AC_ACCESS_DELAY) {
/* IE is a WAPI IE so call set_wapi function */
ret = mwifiex_set_wapi_ie(priv, ie_data_ptr, ie_len);
return ret;
}
/*
* Verify that the passed length is not larger than the
* available space remaining in the buffer
*/
if (ie_len < (sizeof(priv->gen_ie_buf) - priv->gen_ie_buf_len)) {
/* Test to see if it is a WPS IE, if so, enable
* wps session flag
*/
pvendor_ie = (struct ieee_types_vendor_header *) ie_data_ptr;
if ((pvendor_ie->element_id == WLAN_EID_VENDOR_SPECIFIC)
&& (!memcmp(pvendor_ie->oui, wps_oui,
sizeof(wps_oui)))) {
priv->wps.session_enable = true;
dev_dbg(priv->adapter->dev,
"info: WPS Session Enabled.\n");
}
/* Append the passed data to the end of the
genIeBuffer */
memcpy(priv->gen_ie_buf + priv->gen_ie_buf_len, ie_data_ptr,
ie_len);
/* Increment the stored buffer length by the
size passed */
priv->gen_ie_buf_len += ie_len;
} else {
/* Passed data does not fit in the remaining
buffer space */
ret = -1;
}
/* Return 0, or -1 for error case */
return ret;
}
/*
* IOCTL request handler to set/get generic IE.
*
* In addition to various generic IEs, this function can also be
* used to set the ARP filter.
*/
static int mwifiex_misc_ioctl_gen_ie(struct mwifiex_private *priv,
struct mwifiex_ds_misc_gen_ie *gen_ie,
u16 action)
{
struct mwifiex_adapter *adapter = priv->adapter;
switch (gen_ie->type) {
case MWIFIEX_IE_TYPE_GEN_IE:
if (action == HostCmd_ACT_GEN_GET) {
gen_ie->len = priv->wpa_ie_len;
memcpy(gen_ie->ie_data, priv->wpa_ie, gen_ie->len);
} else {
mwifiex_set_gen_ie_helper(priv, gen_ie->ie_data,
(u16) gen_ie->len);
}
break;
case MWIFIEX_IE_TYPE_ARP_FILTER:
memset(adapter->arp_filter, 0, sizeof(adapter->arp_filter));
if (gen_ie->len > ARP_FILTER_MAX_BUF_SIZE) {
adapter->arp_filter_size = 0;
dev_err(adapter->dev, "invalid ARP filter size\n");
return -1;
} else {
memcpy(adapter->arp_filter, gen_ie->ie_data,
gen_ie->len);
adapter->arp_filter_size = gen_ie->len;
}
break;
default:
dev_err(adapter->dev, "invalid IE type\n");
return -1;
}
return 0;
}
/*
* Sends IOCTL request to set a generic IE.
*
* This function allocates the IOCTL request buffer, fills it
* with requisite parameters and calls the IOCTL handler.
*/
int
mwifiex_set_gen_ie(struct mwifiex_private *priv, u8 *ie, int ie_len)
{
struct mwifiex_ds_misc_gen_ie gen_ie;
int status = 0;
if (ie_len > IW_CUSTOM_MAX)
return -EFAULT;
gen_ie.type = MWIFIEX_IE_TYPE_GEN_IE;
gen_ie.len = ie_len;
memcpy(gen_ie.ie_data, ie, ie_len);
status = mwifiex_misc_ioctl_gen_ie(priv, &gen_ie, HostCmd_ACT_GEN_SET);
if (status)
return -EFAULT;
return 0;
}