| /* i915_dma.c -- DMA support for the I915 -*- linux-c -*- |
| */ |
| /* |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
| * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. |
| * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR |
| * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, |
| * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE |
| * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| |
| #include "drmP.h" |
| #include "drm.h" |
| #include "drm_crtc_helper.h" |
| #include "drm_fb_helper.h" |
| #include "intel_drv.h" |
| #include "i915_drm.h" |
| #include "i915_drv.h" |
| #include "i915_trace.h" |
| #include <linux/pci.h> |
| #include <linux/vgaarb.h> |
| #include <linux/acpi.h> |
| #include <linux/pnp.h> |
| #include <linux/vga_switcheroo.h> |
| #include <linux/slab.h> |
| #include <acpi/video.h> |
| |
| /** |
| * Sets up the hardware status page for devices that need a physical address |
| * in the register. |
| */ |
| static int i915_init_phys_hws(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| /* Program Hardware Status Page */ |
| dev_priv->status_page_dmah = |
| drm_pci_alloc(dev, PAGE_SIZE, PAGE_SIZE); |
| |
| if (!dev_priv->status_page_dmah) { |
| DRM_ERROR("Can not allocate hardware status page\n"); |
| return -ENOMEM; |
| } |
| dev_priv->render_ring.status_page.page_addr |
| = dev_priv->status_page_dmah->vaddr; |
| dev_priv->dma_status_page = dev_priv->status_page_dmah->busaddr; |
| |
| memset(dev_priv->render_ring.status_page.page_addr, 0, PAGE_SIZE); |
| |
| if (IS_I965G(dev)) |
| dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) & |
| 0xf0; |
| |
| I915_WRITE(HWS_PGA, dev_priv->dma_status_page); |
| DRM_DEBUG_DRIVER("Enabled hardware status page\n"); |
| return 0; |
| } |
| |
| /** |
| * Frees the hardware status page, whether it's a physical address or a virtual |
| * address set up by the X Server. |
| */ |
| static void i915_free_hws(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| if (dev_priv->status_page_dmah) { |
| drm_pci_free(dev, dev_priv->status_page_dmah); |
| dev_priv->status_page_dmah = NULL; |
| } |
| |
| if (dev_priv->render_ring.status_page.gfx_addr) { |
| dev_priv->render_ring.status_page.gfx_addr = 0; |
| drm_core_ioremapfree(&dev_priv->hws_map, dev); |
| } |
| |
| /* Need to rewrite hardware status page */ |
| I915_WRITE(HWS_PGA, 0x1ffff000); |
| } |
| |
| void i915_kernel_lost_context(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv; |
| struct intel_ring_buffer *ring = &dev_priv->render_ring; |
| |
| /* |
| * We should never lose context on the ring with modesetting |
| * as we don't expose it to userspace |
| */ |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) |
| return; |
| |
| ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR; |
| ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR; |
| ring->space = ring->head - (ring->tail + 8); |
| if (ring->space < 0) |
| ring->space += ring->size; |
| |
| if (!dev->primary->master) |
| return; |
| |
| master_priv = dev->primary->master->driver_priv; |
| if (ring->head == ring->tail && master_priv->sarea_priv) |
| master_priv->sarea_priv->perf_boxes |= I915_BOX_RING_EMPTY; |
| } |
| |
| static int i915_dma_cleanup(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| /* Make sure interrupts are disabled here because the uninstall ioctl |
| * may not have been called from userspace and after dev_private |
| * is freed, it's too late. |
| */ |
| if (dev->irq_enabled) |
| drm_irq_uninstall(dev); |
| |
| mutex_lock(&dev->struct_mutex); |
| intel_cleanup_ring_buffer(dev, &dev_priv->render_ring); |
| if (HAS_BSD(dev)) |
| intel_cleanup_ring_buffer(dev, &dev_priv->bsd_ring); |
| mutex_unlock(&dev->struct_mutex); |
| |
| /* Clear the HWS virtual address at teardown */ |
| if (I915_NEED_GFX_HWS(dev)) |
| i915_free_hws(dev); |
| |
| return 0; |
| } |
| |
| static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; |
| |
| master_priv->sarea = drm_getsarea(dev); |
| if (master_priv->sarea) { |
| master_priv->sarea_priv = (drm_i915_sarea_t *) |
| ((u8 *)master_priv->sarea->handle + init->sarea_priv_offset); |
| } else { |
| DRM_DEBUG_DRIVER("sarea not found assuming DRI2 userspace\n"); |
| } |
| |
| if (init->ring_size != 0) { |
| if (dev_priv->render_ring.gem_object != NULL) { |
| i915_dma_cleanup(dev); |
| DRM_ERROR("Client tried to initialize ringbuffer in " |
| "GEM mode\n"); |
| return -EINVAL; |
| } |
| |
| dev_priv->render_ring.size = init->ring_size; |
| |
| dev_priv->render_ring.map.offset = init->ring_start; |
| dev_priv->render_ring.map.size = init->ring_size; |
| dev_priv->render_ring.map.type = 0; |
| dev_priv->render_ring.map.flags = 0; |
| dev_priv->render_ring.map.mtrr = 0; |
| |
| drm_core_ioremap_wc(&dev_priv->render_ring.map, dev); |
| |
| if (dev_priv->render_ring.map.handle == NULL) { |
| i915_dma_cleanup(dev); |
| DRM_ERROR("can not ioremap virtual address for" |
| " ring buffer\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| dev_priv->render_ring.virtual_start = dev_priv->render_ring.map.handle; |
| |
| dev_priv->cpp = init->cpp; |
| dev_priv->back_offset = init->back_offset; |
| dev_priv->front_offset = init->front_offset; |
| dev_priv->current_page = 0; |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->pf_current_page = 0; |
| |
| /* Allow hardware batchbuffers unless told otherwise. |
| */ |
| dev_priv->allow_batchbuffer = 1; |
| |
| return 0; |
| } |
| |
| static int i915_dma_resume(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| |
| struct intel_ring_buffer *ring; |
| DRM_DEBUG_DRIVER("%s\n", __func__); |
| |
| ring = &dev_priv->render_ring; |
| |
| if (ring->map.handle == NULL) { |
| DRM_ERROR("can not ioremap virtual address for" |
| " ring buffer\n"); |
| return -ENOMEM; |
| } |
| |
| /* Program Hardware Status Page */ |
| if (!ring->status_page.page_addr) { |
| DRM_ERROR("Can not find hardware status page\n"); |
| return -EINVAL; |
| } |
| DRM_DEBUG_DRIVER("hw status page @ %p\n", |
| ring->status_page.page_addr); |
| if (ring->status_page.gfx_addr != 0) |
| ring->setup_status_page(dev, ring); |
| else |
| I915_WRITE(HWS_PGA, dev_priv->dma_status_page); |
| |
| DRM_DEBUG_DRIVER("Enabled hardware status page\n"); |
| |
| return 0; |
| } |
| |
| static int i915_dma_init(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_init_t *init = data; |
| int retcode = 0; |
| |
| switch (init->func) { |
| case I915_INIT_DMA: |
| retcode = i915_initialize(dev, init); |
| break; |
| case I915_CLEANUP_DMA: |
| retcode = i915_dma_cleanup(dev); |
| break; |
| case I915_RESUME_DMA: |
| retcode = i915_dma_resume(dev); |
| break; |
| default: |
| retcode = -EINVAL; |
| break; |
| } |
| |
| return retcode; |
| } |
| |
| /* Implement basically the same security restrictions as hardware does |
| * for MI_BATCH_NON_SECURE. These can be made stricter at any time. |
| * |
| * Most of the calculations below involve calculating the size of a |
| * particular instruction. It's important to get the size right as |
| * that tells us where the next instruction to check is. Any illegal |
| * instruction detected will be given a size of zero, which is a |
| * signal to abort the rest of the buffer. |
| */ |
| static int do_validate_cmd(int cmd) |
| { |
| switch (((cmd >> 29) & 0x7)) { |
| case 0x0: |
| switch ((cmd >> 23) & 0x3f) { |
| case 0x0: |
| return 1; /* MI_NOOP */ |
| case 0x4: |
| return 1; /* MI_FLUSH */ |
| default: |
| return 0; /* disallow everything else */ |
| } |
| break; |
| case 0x1: |
| return 0; /* reserved */ |
| case 0x2: |
| return (cmd & 0xff) + 2; /* 2d commands */ |
| case 0x3: |
| if (((cmd >> 24) & 0x1f) <= 0x18) |
| return 1; |
| |
| switch ((cmd >> 24) & 0x1f) { |
| case 0x1c: |
| return 1; |
| case 0x1d: |
| switch ((cmd >> 16) & 0xff) { |
| case 0x3: |
| return (cmd & 0x1f) + 2; |
| case 0x4: |
| return (cmd & 0xf) + 2; |
| default: |
| return (cmd & 0xffff) + 2; |
| } |
| case 0x1e: |
| if (cmd & (1 << 23)) |
| return (cmd & 0xffff) + 1; |
| else |
| return 1; |
| case 0x1f: |
| if ((cmd & (1 << 23)) == 0) /* inline vertices */ |
| return (cmd & 0x1ffff) + 2; |
| else if (cmd & (1 << 17)) /* indirect random */ |
| if ((cmd & 0xffff) == 0) |
| return 0; /* unknown length, too hard */ |
| else |
| return (((cmd & 0xffff) + 1) / 2) + 1; |
| else |
| return 2; /* indirect sequential */ |
| default: |
| return 0; |
| } |
| default: |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| static int validate_cmd(int cmd) |
| { |
| int ret = do_validate_cmd(cmd); |
| |
| /* printk("validate_cmd( %x ): %d\n", cmd, ret); */ |
| |
| return ret; |
| } |
| |
| static int i915_emit_cmds(struct drm_device * dev, int *buffer, int dwords) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| int i; |
| |
| if ((dwords+1) * sizeof(int) >= dev_priv->render_ring.size - 8) |
| return -EINVAL; |
| |
| BEGIN_LP_RING((dwords+1)&~1); |
| |
| for (i = 0; i < dwords;) { |
| int cmd, sz; |
| |
| cmd = buffer[i]; |
| |
| if ((sz = validate_cmd(cmd)) == 0 || i + sz > dwords) |
| return -EINVAL; |
| |
| OUT_RING(cmd); |
| |
| while (++i, --sz) { |
| OUT_RING(buffer[i]); |
| } |
| } |
| |
| if (dwords & 1) |
| OUT_RING(0); |
| |
| ADVANCE_LP_RING(); |
| |
| return 0; |
| } |
| |
| int |
| i915_emit_box(struct drm_device *dev, |
| struct drm_clip_rect *boxes, |
| int i, int DR1, int DR4) |
| { |
| struct drm_clip_rect box = boxes[i]; |
| |
| if (box.y2 <= box.y1 || box.x2 <= box.x1 || box.y2 <= 0 || box.x2 <= 0) { |
| DRM_ERROR("Bad box %d,%d..%d,%d\n", |
| box.x1, box.y1, box.x2, box.y2); |
| return -EINVAL; |
| } |
| |
| if (IS_I965G(dev)) { |
| BEGIN_LP_RING(4); |
| OUT_RING(GFX_OP_DRAWRECT_INFO_I965); |
| OUT_RING((box.x1 & 0xffff) | (box.y1 << 16)); |
| OUT_RING(((box.x2 - 1) & 0xffff) | ((box.y2 - 1) << 16)); |
| OUT_RING(DR4); |
| ADVANCE_LP_RING(); |
| } else { |
| BEGIN_LP_RING(6); |
| OUT_RING(GFX_OP_DRAWRECT_INFO); |
| OUT_RING(DR1); |
| OUT_RING((box.x1 & 0xffff) | (box.y1 << 16)); |
| OUT_RING(((box.x2 - 1) & 0xffff) | ((box.y2 - 1) << 16)); |
| OUT_RING(DR4); |
| OUT_RING(0); |
| ADVANCE_LP_RING(); |
| } |
| |
| return 0; |
| } |
| |
| /* XXX: Emitting the counter should really be moved to part of the IRQ |
| * emit. For now, do it in both places: |
| */ |
| |
| static void i915_emit_breadcrumb(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; |
| |
| dev_priv->counter++; |
| if (dev_priv->counter > 0x7FFFFFFFUL) |
| dev_priv->counter = 0; |
| if (master_priv->sarea_priv) |
| master_priv->sarea_priv->last_enqueue = dev_priv->counter; |
| |
| BEGIN_LP_RING(4); |
| OUT_RING(MI_STORE_DWORD_INDEX); |
| OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); |
| OUT_RING(dev_priv->counter); |
| OUT_RING(0); |
| ADVANCE_LP_RING(); |
| } |
| |
| static int i915_dispatch_cmdbuffer(struct drm_device * dev, |
| drm_i915_cmdbuffer_t *cmd, |
| struct drm_clip_rect *cliprects, |
| void *cmdbuf) |
| { |
| int nbox = cmd->num_cliprects; |
| int i = 0, count, ret; |
| |
| if (cmd->sz & 0x3) { |
| DRM_ERROR("alignment"); |
| return -EINVAL; |
| } |
| |
| i915_kernel_lost_context(dev); |
| |
| count = nbox ? nbox : 1; |
| |
| for (i = 0; i < count; i++) { |
| if (i < nbox) { |
| ret = i915_emit_box(dev, cliprects, i, |
| cmd->DR1, cmd->DR4); |
| if (ret) |
| return ret; |
| } |
| |
| ret = i915_emit_cmds(dev, cmdbuf, cmd->sz / 4); |
| if (ret) |
| return ret; |
| } |
| |
| i915_emit_breadcrumb(dev); |
| return 0; |
| } |
| |
| static int i915_dispatch_batchbuffer(struct drm_device * dev, |
| drm_i915_batchbuffer_t * batch, |
| struct drm_clip_rect *cliprects) |
| { |
| int nbox = batch->num_cliprects; |
| int i = 0, count; |
| |
| if ((batch->start | batch->used) & 0x7) { |
| DRM_ERROR("alignment"); |
| return -EINVAL; |
| } |
| |
| i915_kernel_lost_context(dev); |
| |
| count = nbox ? nbox : 1; |
| |
| for (i = 0; i < count; i++) { |
| if (i < nbox) { |
| int ret = i915_emit_box(dev, cliprects, i, |
| batch->DR1, batch->DR4); |
| if (ret) |
| return ret; |
| } |
| |
| if (!IS_I830(dev) && !IS_845G(dev)) { |
| BEGIN_LP_RING(2); |
| if (IS_I965G(dev)) { |
| OUT_RING(MI_BATCH_BUFFER_START | (2 << 6) | MI_BATCH_NON_SECURE_I965); |
| OUT_RING(batch->start); |
| } else { |
| OUT_RING(MI_BATCH_BUFFER_START | (2 << 6)); |
| OUT_RING(batch->start | MI_BATCH_NON_SECURE); |
| } |
| ADVANCE_LP_RING(); |
| } else { |
| BEGIN_LP_RING(4); |
| OUT_RING(MI_BATCH_BUFFER); |
| OUT_RING(batch->start | MI_BATCH_NON_SECURE); |
| OUT_RING(batch->start + batch->used - 4); |
| OUT_RING(0); |
| ADVANCE_LP_RING(); |
| } |
| } |
| |
| |
| if (IS_G4X(dev) || IS_IRONLAKE(dev)) { |
| BEGIN_LP_RING(2); |
| OUT_RING(MI_FLUSH | MI_NO_WRITE_FLUSH | MI_INVALIDATE_ISP); |
| OUT_RING(MI_NOOP); |
| ADVANCE_LP_RING(); |
| } |
| i915_emit_breadcrumb(dev); |
| |
| return 0; |
| } |
| |
| static int i915_dispatch_flip(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| struct drm_i915_master_private *master_priv = |
| dev->primary->master->driver_priv; |
| |
| if (!master_priv->sarea_priv) |
| return -EINVAL; |
| |
| DRM_DEBUG_DRIVER("%s: page=%d pfCurrentPage=%d\n", |
| __func__, |
| dev_priv->current_page, |
| master_priv->sarea_priv->pf_current_page); |
| |
| i915_kernel_lost_context(dev); |
| |
| BEGIN_LP_RING(2); |
| OUT_RING(MI_FLUSH | MI_READ_FLUSH); |
| OUT_RING(0); |
| ADVANCE_LP_RING(); |
| |
| BEGIN_LP_RING(6); |
| OUT_RING(CMD_OP_DISPLAYBUFFER_INFO | ASYNC_FLIP); |
| OUT_RING(0); |
| if (dev_priv->current_page == 0) { |
| OUT_RING(dev_priv->back_offset); |
| dev_priv->current_page = 1; |
| } else { |
| OUT_RING(dev_priv->front_offset); |
| dev_priv->current_page = 0; |
| } |
| OUT_RING(0); |
| ADVANCE_LP_RING(); |
| |
| BEGIN_LP_RING(2); |
| OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_PLANE_A_FLIP); |
| OUT_RING(0); |
| ADVANCE_LP_RING(); |
| |
| master_priv->sarea_priv->last_enqueue = dev_priv->counter++; |
| |
| BEGIN_LP_RING(4); |
| OUT_RING(MI_STORE_DWORD_INDEX); |
| OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); |
| OUT_RING(dev_priv->counter); |
| OUT_RING(0); |
| ADVANCE_LP_RING(); |
| |
| master_priv->sarea_priv->pf_current_page = dev_priv->current_page; |
| return 0; |
| } |
| |
| static int i915_quiescent(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| i915_kernel_lost_context(dev); |
| return intel_wait_ring_buffer(dev, &dev_priv->render_ring, |
| dev_priv->render_ring.size - 8); |
| } |
| |
| static int i915_flush_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| int ret; |
| |
| RING_LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_quiescent(dev); |
| mutex_unlock(&dev->struct_mutex); |
| |
| return ret; |
| } |
| |
| static int i915_batchbuffer(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; |
| drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *) |
| master_priv->sarea_priv; |
| drm_i915_batchbuffer_t *batch = data; |
| int ret; |
| struct drm_clip_rect *cliprects = NULL; |
| |
| if (!dev_priv->allow_batchbuffer) { |
| DRM_ERROR("Batchbuffer ioctl disabled\n"); |
| return -EINVAL; |
| } |
| |
| DRM_DEBUG_DRIVER("i915 batchbuffer, start %x used %d cliprects %d\n", |
| batch->start, batch->used, batch->num_cliprects); |
| |
| RING_LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| if (batch->num_cliprects < 0) |
| return -EINVAL; |
| |
| if (batch->num_cliprects) { |
| cliprects = kcalloc(batch->num_cliprects, |
| sizeof(struct drm_clip_rect), |
| GFP_KERNEL); |
| if (cliprects == NULL) |
| return -ENOMEM; |
| |
| ret = copy_from_user(cliprects, batch->cliprects, |
| batch->num_cliprects * |
| sizeof(struct drm_clip_rect)); |
| if (ret != 0) { |
| ret = -EFAULT; |
| goto fail_free; |
| } |
| } |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_dispatch_batchbuffer(dev, batch, cliprects); |
| mutex_unlock(&dev->struct_mutex); |
| |
| if (sarea_priv) |
| sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); |
| |
| fail_free: |
| kfree(cliprects); |
| |
| return ret; |
| } |
| |
| static int i915_cmdbuffer(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; |
| struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv; |
| drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *) |
| master_priv->sarea_priv; |
| drm_i915_cmdbuffer_t *cmdbuf = data; |
| struct drm_clip_rect *cliprects = NULL; |
| void *batch_data; |
| int ret; |
| |
| DRM_DEBUG_DRIVER("i915 cmdbuffer, buf %p sz %d cliprects %d\n", |
| cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects); |
| |
| RING_LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| if (cmdbuf->num_cliprects < 0) |
| return -EINVAL; |
| |
| batch_data = kmalloc(cmdbuf->sz, GFP_KERNEL); |
| if (batch_data == NULL) |
| return -ENOMEM; |
| |
| ret = copy_from_user(batch_data, cmdbuf->buf, cmdbuf->sz); |
| if (ret != 0) { |
| ret = -EFAULT; |
| goto fail_batch_free; |
| } |
| |
| if (cmdbuf->num_cliprects) { |
| cliprects = kcalloc(cmdbuf->num_cliprects, |
| sizeof(struct drm_clip_rect), GFP_KERNEL); |
| if (cliprects == NULL) { |
| ret = -ENOMEM; |
| goto fail_batch_free; |
| } |
| |
| ret = copy_from_user(cliprects, cmdbuf->cliprects, |
| cmdbuf->num_cliprects * |
| sizeof(struct drm_clip_rect)); |
| if (ret != 0) { |
| ret = -EFAULT; |
| goto fail_clip_free; |
| } |
| } |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_dispatch_cmdbuffer(dev, cmdbuf, cliprects, batch_data); |
| mutex_unlock(&dev->struct_mutex); |
| if (ret) { |
| DRM_ERROR("i915_dispatch_cmdbuffer failed\n"); |
| goto fail_clip_free; |
| } |
| |
| if (sarea_priv) |
| sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); |
| |
| fail_clip_free: |
| kfree(cliprects); |
| fail_batch_free: |
| kfree(batch_data); |
| |
| return ret; |
| } |
| |
| static int i915_flip_bufs(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| int ret; |
| |
| DRM_DEBUG_DRIVER("%s\n", __func__); |
| |
| RING_LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_dispatch_flip(dev); |
| mutex_unlock(&dev->struct_mutex); |
| |
| return ret; |
| } |
| |
| static int i915_getparam(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| drm_i915_getparam_t *param = data; |
| int value; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| switch (param->param) { |
| case I915_PARAM_IRQ_ACTIVE: |
| value = dev->pdev->irq ? 1 : 0; |
| break; |
| case I915_PARAM_ALLOW_BATCHBUFFER: |
| value = dev_priv->allow_batchbuffer ? 1 : 0; |
| break; |
| case I915_PARAM_LAST_DISPATCH: |
| value = READ_BREADCRUMB(dev_priv); |
| break; |
| case I915_PARAM_CHIPSET_ID: |
| value = dev->pci_device; |
| break; |
| case I915_PARAM_HAS_GEM: |
| value = dev_priv->has_gem; |
| break; |
| case I915_PARAM_NUM_FENCES_AVAIL: |
| value = dev_priv->num_fence_regs - dev_priv->fence_reg_start; |
| break; |
| case I915_PARAM_HAS_OVERLAY: |
| value = dev_priv->overlay ? 1 : 0; |
| break; |
| case I915_PARAM_HAS_PAGEFLIPPING: |
| value = 1; |
| break; |
| case I915_PARAM_HAS_EXECBUF2: |
| /* depends on GEM */ |
| value = dev_priv->has_gem; |
| break; |
| case I915_PARAM_HAS_BSD: |
| value = HAS_BSD(dev); |
| break; |
| default: |
| DRM_DEBUG_DRIVER("Unknown parameter %d\n", |
| param->param); |
| return -EINVAL; |
| } |
| |
| if (DRM_COPY_TO_USER(param->value, &value, sizeof(int))) { |
| DRM_ERROR("DRM_COPY_TO_USER failed\n"); |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| static int i915_setparam(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| drm_i915_setparam_t *param = data; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| switch (param->param) { |
| case I915_SETPARAM_USE_MI_BATCHBUFFER_START: |
| break; |
| case I915_SETPARAM_TEX_LRU_LOG_GRANULARITY: |
| dev_priv->tex_lru_log_granularity = param->value; |
| break; |
| case I915_SETPARAM_ALLOW_BATCHBUFFER: |
| dev_priv->allow_batchbuffer = param->value; |
| break; |
| case I915_SETPARAM_NUM_USED_FENCES: |
| if (param->value > dev_priv->num_fence_regs || |
| param->value < 0) |
| return -EINVAL; |
| /* Userspace can use first N regs */ |
| dev_priv->fence_reg_start = param->value; |
| break; |
| default: |
| DRM_DEBUG_DRIVER("unknown parameter %d\n", |
| param->param); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int i915_set_status_page(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| drm_i915_hws_addr_t *hws = data; |
| struct intel_ring_buffer *ring = &dev_priv->render_ring; |
| |
| if (!I915_NEED_GFX_HWS(dev)) |
| return -EINVAL; |
| |
| if (!dev_priv) { |
| DRM_ERROR("called with no initialization\n"); |
| return -EINVAL; |
| } |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| WARN(1, "tried to set status page when mode setting active\n"); |
| return 0; |
| } |
| |
| DRM_DEBUG_DRIVER("set status page addr 0x%08x\n", (u32)hws->addr); |
| |
| ring->status_page.gfx_addr = hws->addr & (0x1ffff<<12); |
| |
| dev_priv->hws_map.offset = dev->agp->base + hws->addr; |
| dev_priv->hws_map.size = 4*1024; |
| dev_priv->hws_map.type = 0; |
| dev_priv->hws_map.flags = 0; |
| dev_priv->hws_map.mtrr = 0; |
| |
| drm_core_ioremap_wc(&dev_priv->hws_map, dev); |
| if (dev_priv->hws_map.handle == NULL) { |
| i915_dma_cleanup(dev); |
| ring->status_page.gfx_addr = 0; |
| DRM_ERROR("can not ioremap virtual address for" |
| " G33 hw status page\n"); |
| return -ENOMEM; |
| } |
| ring->status_page.page_addr = dev_priv->hws_map.handle; |
| memset(ring->status_page.page_addr, 0, PAGE_SIZE); |
| I915_WRITE(HWS_PGA, ring->status_page.gfx_addr); |
| |
| DRM_DEBUG_DRIVER("load hws HWS_PGA with gfx mem 0x%x\n", |
| ring->status_page.gfx_addr); |
| DRM_DEBUG_DRIVER("load hws at %p\n", |
| ring->status_page.page_addr); |
| return 0; |
| } |
| |
| static int i915_get_bridge_dev(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); |
| if (!dev_priv->bridge_dev) { |
| DRM_ERROR("bridge device not found\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| #define MCHBAR_I915 0x44 |
| #define MCHBAR_I965 0x48 |
| #define MCHBAR_SIZE (4*4096) |
| |
| #define DEVEN_REG 0x54 |
| #define DEVEN_MCHBAR_EN (1 << 28) |
| |
| /* Allocate space for the MCH regs if needed, return nonzero on error */ |
| static int |
| intel_alloc_mchbar_resource(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| int reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915; |
| u32 temp_lo, temp_hi = 0; |
| u64 mchbar_addr; |
| int ret; |
| |
| if (IS_I965G(dev)) |
| pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi); |
| pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo); |
| mchbar_addr = ((u64)temp_hi << 32) | temp_lo; |
| |
| /* If ACPI doesn't have it, assume we need to allocate it ourselves */ |
| #ifdef CONFIG_PNP |
| if (mchbar_addr && |
| pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE)) |
| return 0; |
| #endif |
| |
| /* Get some space for it */ |
| dev_priv->mch_res.name = "i915 MCHBAR"; |
| dev_priv->mch_res.flags = IORESOURCE_MEM; |
| ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus, |
| &dev_priv->mch_res, |
| MCHBAR_SIZE, MCHBAR_SIZE, |
| PCIBIOS_MIN_MEM, |
| 0, pcibios_align_resource, |
| dev_priv->bridge_dev); |
| if (ret) { |
| DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret); |
| dev_priv->mch_res.start = 0; |
| return ret; |
| } |
| |
| if (IS_I965G(dev)) |
| pci_write_config_dword(dev_priv->bridge_dev, reg + 4, |
| upper_32_bits(dev_priv->mch_res.start)); |
| |
| pci_write_config_dword(dev_priv->bridge_dev, reg, |
| lower_32_bits(dev_priv->mch_res.start)); |
| return 0; |
| } |
| |
| /* Setup MCHBAR if possible, return true if we should disable it again */ |
| static void |
| intel_setup_mchbar(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915; |
| u32 temp; |
| bool enabled; |
| |
| dev_priv->mchbar_need_disable = false; |
| |
| if (IS_I915G(dev) || IS_I915GM(dev)) { |
| pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp); |
| enabled = !!(temp & DEVEN_MCHBAR_EN); |
| } else { |
| pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp); |
| enabled = temp & 1; |
| } |
| |
| /* If it's already enabled, don't have to do anything */ |
| if (enabled) |
| return; |
| |
| if (intel_alloc_mchbar_resource(dev)) |
| return; |
| |
| dev_priv->mchbar_need_disable = true; |
| |
| /* Space is allocated or reserved, so enable it. */ |
| if (IS_I915G(dev) || IS_I915GM(dev)) { |
| pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, |
| temp | DEVEN_MCHBAR_EN); |
| } else { |
| pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp); |
| pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1); |
| } |
| } |
| |
| static void |
| intel_teardown_mchbar(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| int mchbar_reg = IS_I965G(dev) ? MCHBAR_I965 : MCHBAR_I915; |
| u32 temp; |
| |
| if (dev_priv->mchbar_need_disable) { |
| if (IS_I915G(dev) || IS_I915GM(dev)) { |
| pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp); |
| temp &= ~DEVEN_MCHBAR_EN; |
| pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, temp); |
| } else { |
| pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp); |
| temp &= ~1; |
| pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp); |
| } |
| } |
| |
| if (dev_priv->mch_res.start) |
| release_resource(&dev_priv->mch_res); |
| } |
| |
| #define PTE_ADDRESS_MASK 0xfffff000 |
| #define PTE_ADDRESS_MASK_HIGH 0x000000f0 /* i915+ */ |
| #define PTE_MAPPING_TYPE_UNCACHED (0 << 1) |
| #define PTE_MAPPING_TYPE_DCACHE (1 << 1) /* i830 only */ |
| #define PTE_MAPPING_TYPE_CACHED (3 << 1) |
| #define PTE_MAPPING_TYPE_MASK (3 << 1) |
| #define PTE_VALID (1 << 0) |
| |
| /** |
| * i915_gtt_to_phys - take a GTT address and turn it into a physical one |
| * @dev: drm device |
| * @gtt_addr: address to translate |
| * |
| * Some chip functions require allocations from stolen space but need the |
| * physical address of the memory in question. We use this routine |
| * to get a physical address suitable for register programming from a given |
| * GTT address. |
| */ |
| static unsigned long i915_gtt_to_phys(struct drm_device *dev, |
| unsigned long gtt_addr) |
| { |
| unsigned long *gtt; |
| unsigned long entry, phys; |
| int gtt_bar = IS_I9XX(dev) ? 0 : 1; |
| int gtt_offset, gtt_size; |
| |
| if (IS_I965G(dev)) { |
| if (IS_G4X(dev) || IS_IRONLAKE(dev) || IS_GEN6(dev)) { |
| gtt_offset = 2*1024*1024; |
| gtt_size = 2*1024*1024; |
| } else { |
| gtt_offset = 512*1024; |
| gtt_size = 512*1024; |
| } |
| } else { |
| gtt_bar = 3; |
| gtt_offset = 0; |
| gtt_size = pci_resource_len(dev->pdev, gtt_bar); |
| } |
| |
| gtt = ioremap_wc(pci_resource_start(dev->pdev, gtt_bar) + gtt_offset, |
| gtt_size); |
| if (!gtt) { |
| DRM_ERROR("ioremap of GTT failed\n"); |
| return 0; |
| } |
| |
| entry = *(volatile u32 *)(gtt + (gtt_addr / 1024)); |
| |
| DRM_DEBUG_DRIVER("GTT addr: 0x%08lx, PTE: 0x%08lx\n", gtt_addr, entry); |
| |
| /* Mask out these reserved bits on this hardware. */ |
| if (!IS_I9XX(dev) || IS_I915G(dev) || IS_I915GM(dev) || |
| IS_I945G(dev) || IS_I945GM(dev)) { |
| entry &= ~PTE_ADDRESS_MASK_HIGH; |
| } |
| |
| /* If it's not a mapping type we know, then bail. */ |
| if ((entry & PTE_MAPPING_TYPE_MASK) != PTE_MAPPING_TYPE_UNCACHED && |
| (entry & PTE_MAPPING_TYPE_MASK) != PTE_MAPPING_TYPE_CACHED) { |
| iounmap(gtt); |
| return 0; |
| } |
| |
| if (!(entry & PTE_VALID)) { |
| DRM_ERROR("bad GTT entry in stolen space\n"); |
| iounmap(gtt); |
| return 0; |
| } |
| |
| iounmap(gtt); |
| |
| phys =(entry & PTE_ADDRESS_MASK) | |
| ((uint64_t)(entry & PTE_ADDRESS_MASK_HIGH) << (32 - 4)); |
| |
| DRM_DEBUG_DRIVER("GTT addr: 0x%08lx, phys addr: 0x%08lx\n", gtt_addr, phys); |
| |
| return phys; |
| } |
| |
| static void i915_warn_stolen(struct drm_device *dev) |
| { |
| DRM_ERROR("not enough stolen space for compressed buffer, disabling\n"); |
| DRM_ERROR("hint: you may be able to increase stolen memory size in the BIOS to avoid this\n"); |
| } |
| |
| static void i915_setup_compression(struct drm_device *dev, int size) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct drm_mm_node *compressed_fb, *uninitialized_var(compressed_llb); |
| unsigned long cfb_base; |
| unsigned long ll_base = 0; |
| |
| /* Leave 1M for line length buffer & misc. */ |
| compressed_fb = drm_mm_search_free(&dev_priv->mm.vram, size, 4096, 0); |
| if (!compressed_fb) { |
| dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL; |
| i915_warn_stolen(dev); |
| return; |
| } |
| |
| compressed_fb = drm_mm_get_block(compressed_fb, size, 4096); |
| if (!compressed_fb) { |
| i915_warn_stolen(dev); |
| dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL; |
| return; |
| } |
| |
| cfb_base = i915_gtt_to_phys(dev, compressed_fb->start); |
| if (!cfb_base) { |
| DRM_ERROR("failed to get stolen phys addr, disabling FBC\n"); |
| drm_mm_put_block(compressed_fb); |
| } |
| |
| if (!(IS_GM45(dev) || IS_IRONLAKE_M(dev))) { |
| compressed_llb = drm_mm_search_free(&dev_priv->mm.vram, 4096, |
| 4096, 0); |
| if (!compressed_llb) { |
| i915_warn_stolen(dev); |
| return; |
| } |
| |
| compressed_llb = drm_mm_get_block(compressed_llb, 4096, 4096); |
| if (!compressed_llb) { |
| i915_warn_stolen(dev); |
| return; |
| } |
| |
| ll_base = i915_gtt_to_phys(dev, compressed_llb->start); |
| if (!ll_base) { |
| DRM_ERROR("failed to get stolen phys addr, disabling FBC\n"); |
| drm_mm_put_block(compressed_fb); |
| drm_mm_put_block(compressed_llb); |
| } |
| } |
| |
| dev_priv->cfb_size = size; |
| |
| intel_disable_fbc(dev); |
| dev_priv->compressed_fb = compressed_fb; |
| if (IS_IRONLAKE_M(dev)) |
| I915_WRITE(ILK_DPFC_CB_BASE, compressed_fb->start); |
| else if (IS_GM45(dev)) { |
| I915_WRITE(DPFC_CB_BASE, compressed_fb->start); |
| } else { |
| I915_WRITE(FBC_CFB_BASE, cfb_base); |
| I915_WRITE(FBC_LL_BASE, ll_base); |
| dev_priv->compressed_llb = compressed_llb; |
| } |
| |
| DRM_DEBUG_KMS("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n", cfb_base, |
| ll_base, size >> 20); |
| } |
| |
| static void i915_cleanup_compression(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| drm_mm_put_block(dev_priv->compressed_fb); |
| if (dev_priv->compressed_llb) |
| drm_mm_put_block(dev_priv->compressed_llb); |
| } |
| |
| /* true = enable decode, false = disable decoder */ |
| static unsigned int i915_vga_set_decode(void *cookie, bool state) |
| { |
| struct drm_device *dev = cookie; |
| |
| intel_modeset_vga_set_state(dev, state); |
| if (state) |
| return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM | |
| VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM; |
| else |
| return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM; |
| } |
| |
| static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state) |
| { |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| pm_message_t pmm = { .event = PM_EVENT_SUSPEND }; |
| if (state == VGA_SWITCHEROO_ON) { |
| printk(KERN_INFO "i915: switched on\n"); |
| /* i915 resume handler doesn't set to D0 */ |
| pci_set_power_state(dev->pdev, PCI_D0); |
| i915_resume(dev); |
| drm_kms_helper_poll_enable(dev); |
| } else { |
| printk(KERN_ERR "i915: switched off\n"); |
| drm_kms_helper_poll_disable(dev); |
| i915_suspend(dev, pmm); |
| } |
| } |
| |
| static bool i915_switcheroo_can_switch(struct pci_dev *pdev) |
| { |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| bool can_switch; |
| |
| spin_lock(&dev->count_lock); |
| can_switch = (dev->open_count == 0); |
| spin_unlock(&dev->count_lock); |
| return can_switch; |
| } |
| |
| static int i915_load_modeset_init(struct drm_device *dev, |
| unsigned long prealloc_size, |
| unsigned long agp_size) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret = 0; |
| |
| /* Basic memrange allocator for stolen space (aka mm.vram) */ |
| drm_mm_init(&dev_priv->mm.vram, 0, prealloc_size); |
| DRM_INFO("set up %ldM of stolen space\n", prealloc_size / (1024*1024)); |
| |
| /* We're off and running w/KMS */ |
| dev_priv->mm.suspended = 0; |
| |
| /* Let GEM Manage from end of prealloc space to end of aperture. |
| * |
| * However, leave one page at the end still bound to the scratch page. |
| * There are a number of places where the hardware apparently |
| * prefetches past the end of the object, and we've seen multiple |
| * hangs with the GPU head pointer stuck in a batchbuffer bound |
| * at the last page of the aperture. One page should be enough to |
| * keep any prefetching inside of the aperture. |
| */ |
| i915_gem_do_init(dev, prealloc_size, agp_size - 4096); |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_gem_init_ringbuffer(dev); |
| mutex_unlock(&dev->struct_mutex); |
| if (ret) |
| goto out; |
| |
| /* Try to set up FBC with a reasonable compressed buffer size */ |
| if (I915_HAS_FBC(dev) && i915_powersave) { |
| int cfb_size; |
| |
| /* Try to get an 8M buffer... */ |
| if (prealloc_size > (9*1024*1024)) |
| cfb_size = 8*1024*1024; |
| else /* fall back to 7/8 of the stolen space */ |
| cfb_size = prealloc_size * 7 / 8; |
| i915_setup_compression(dev, cfb_size); |
| } |
| |
| /* Allow hardware batchbuffers unless told otherwise. |
| */ |
| dev_priv->allow_batchbuffer = 1; |
| |
| ret = intel_init_bios(dev); |
| if (ret) |
| DRM_INFO("failed to find VBIOS tables\n"); |
| |
| /* if we have > 1 VGA cards, then disable the radeon VGA resources */ |
| ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode); |
| if (ret) |
| goto cleanup_ringbuffer; |
| |
| ret = vga_switcheroo_register_client(dev->pdev, |
| i915_switcheroo_set_state, |
| i915_switcheroo_can_switch); |
| if (ret) |
| goto cleanup_vga_client; |
| |
| /* IIR "flip pending" bit means done if this bit is set */ |
| if (IS_GEN3(dev) && (I915_READ(ECOSKPD) & ECO_FLIP_DONE)) |
| dev_priv->flip_pending_is_done = true; |
| |
| intel_modeset_init(dev); |
| |
| ret = drm_irq_install(dev); |
| if (ret) |
| goto cleanup_vga_switcheroo; |
| |
| /* Always safe in the mode setting case. */ |
| /* FIXME: do pre/post-mode set stuff in core KMS code */ |
| dev->vblank_disable_allowed = 1; |
| |
| ret = intel_fbdev_init(dev); |
| if (ret) |
| goto cleanup_irq; |
| |
| drm_kms_helper_poll_init(dev); |
| return 0; |
| |
| cleanup_irq: |
| drm_irq_uninstall(dev); |
| cleanup_vga_switcheroo: |
| vga_switcheroo_unregister_client(dev->pdev); |
| cleanup_vga_client: |
| vga_client_register(dev->pdev, NULL, NULL, NULL); |
| cleanup_ringbuffer: |
| mutex_lock(&dev->struct_mutex); |
| i915_gem_cleanup_ringbuffer(dev); |
| mutex_unlock(&dev->struct_mutex); |
| out: |
| return ret; |
| } |
| |
| int i915_master_create(struct drm_device *dev, struct drm_master *master) |
| { |
| struct drm_i915_master_private *master_priv; |
| |
| master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL); |
| if (!master_priv) |
| return -ENOMEM; |
| |
| master->driver_priv = master_priv; |
| return 0; |
| } |
| |
| void i915_master_destroy(struct drm_device *dev, struct drm_master *master) |
| { |
| struct drm_i915_master_private *master_priv = master->driver_priv; |
| |
| if (!master_priv) |
| return; |
| |
| kfree(master_priv); |
| |
| master->driver_priv = NULL; |
| } |
| |
| static void i915_pineview_get_mem_freq(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| u32 tmp; |
| |
| tmp = I915_READ(CLKCFG); |
| |
| switch (tmp & CLKCFG_FSB_MASK) { |
| case CLKCFG_FSB_533: |
| dev_priv->fsb_freq = 533; /* 133*4 */ |
| break; |
| case CLKCFG_FSB_800: |
| dev_priv->fsb_freq = 800; /* 200*4 */ |
| break; |
| case CLKCFG_FSB_667: |
| dev_priv->fsb_freq = 667; /* 167*4 */ |
| break; |
| case CLKCFG_FSB_400: |
| dev_priv->fsb_freq = 400; /* 100*4 */ |
| break; |
| } |
| |
| switch (tmp & CLKCFG_MEM_MASK) { |
| case CLKCFG_MEM_533: |
| dev_priv->mem_freq = 533; |
| break; |
| case CLKCFG_MEM_667: |
| dev_priv->mem_freq = 667; |
| break; |
| case CLKCFG_MEM_800: |
| dev_priv->mem_freq = 800; |
| break; |
| } |
| |
| /* detect pineview DDR3 setting */ |
| tmp = I915_READ(CSHRDDR3CTL); |
| dev_priv->is_ddr3 = (tmp & CSHRDDR3CTL_DDR3) ? 1 : 0; |
| } |
| |
| static void i915_ironlake_get_mem_freq(struct drm_device *dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| u16 ddrpll, csipll; |
| |
| ddrpll = I915_READ16(DDRMPLL1); |
| csipll = I915_READ16(CSIPLL0); |
| |
| switch (ddrpll & 0xff) { |
| case 0xc: |
| dev_priv->mem_freq = 800; |
| break; |
| case 0x10: |
| dev_priv->mem_freq = 1066; |
| break; |
| case 0x14: |
| dev_priv->mem_freq = 1333; |
| break; |
| case 0x18: |
| dev_priv->mem_freq = 1600; |
| break; |
| default: |
| DRM_DEBUG_DRIVER("unknown memory frequency 0x%02x\n", |
| ddrpll & 0xff); |
| dev_priv->mem_freq = 0; |
| break; |
| } |
| |
| dev_priv->r_t = dev_priv->mem_freq; |
| |
| switch (csipll & 0x3ff) { |
| case 0x00c: |
| dev_priv->fsb_freq = 3200; |
| break; |
| case 0x00e: |
| dev_priv->fsb_freq = 3733; |
| break; |
| case 0x010: |
| dev_priv->fsb_freq = 4266; |
| break; |
| case 0x012: |
| dev_priv->fsb_freq = 4800; |
| break; |
| case 0x014: |
| dev_priv->fsb_freq = 5333; |
| break; |
| case 0x016: |
| dev_priv->fsb_freq = 5866; |
| break; |
| case 0x018: |
| dev_priv->fsb_freq = 6400; |
| break; |
| default: |
| DRM_DEBUG_DRIVER("unknown fsb frequency 0x%04x\n", |
| csipll & 0x3ff); |
| dev_priv->fsb_freq = 0; |
| break; |
| } |
| |
| if (dev_priv->fsb_freq == 3200) { |
| dev_priv->c_m = 0; |
| } else if (dev_priv->fsb_freq > 3200 && dev_priv->fsb_freq <= 4800) { |
| dev_priv->c_m = 1; |
| } else { |
| dev_priv->c_m = 2; |
| } |
| } |
| |
| struct v_table { |
| u8 vid; |
| unsigned long vd; /* in .1 mil */ |
| unsigned long vm; /* in .1 mil */ |
| u8 pvid; |
| }; |
| |
| static struct v_table v_table[] = { |
| { 0, 16125, 15000, 0x7f, }, |
| { 1, 16000, 14875, 0x7e, }, |
| { 2, 15875, 14750, 0x7d, }, |
| { 3, 15750, 14625, 0x7c, }, |
| { 4, 15625, 14500, 0x7b, }, |
| { 5, 15500, 14375, 0x7a, }, |
| { 6, 15375, 14250, 0x79, }, |
| { 7, 15250, 14125, 0x78, }, |
| { 8, 15125, 14000, 0x77, }, |
| { 9, 15000, 13875, 0x76, }, |
| { 10, 14875, 13750, 0x75, }, |
| { 11, 14750, 13625, 0x74, }, |
| { 12, 14625, 13500, 0x73, }, |
| { 13, 14500, 13375, 0x72, }, |
| { 14, 14375, 13250, 0x71, }, |
| { 15, 14250, 13125, 0x70, }, |
| { 16, 14125, 13000, 0x6f, }, |
| { 17, 14000, 12875, 0x6e, }, |
| { 18, 13875, 12750, 0x6d, }, |
| { 19, 13750, 12625, 0x6c, }, |
| { 20, 13625, 12500, 0x6b, }, |
| { 21, 13500, 12375, 0x6a, }, |
| { 22, 13375, 12250, 0x69, }, |
| { 23, 13250, 12125, 0x68, }, |
| { 24, 13125, 12000, 0x67, }, |
| { 25, 13000, 11875, 0x66, }, |
| { 26, 12875, 11750, 0x65, }, |
| { 27, 12750, 11625, 0x64, }, |
| { 28, 12625, 11500, 0x63, }, |
| { 29, 12500, 11375, 0x62, }, |
| { 30, 12375, 11250, 0x61, }, |
| { 31, 12250, 11125, 0x60, }, |
| { 32, 12125, 11000, 0x5f, }, |
| { 33, 12000, 10875, 0x5e, }, |
| { 34, 11875, 10750, 0x5d, }, |
| { 35, 11750, 10625, 0x5c, }, |
| { 36, 11625, 10500, 0x5b, }, |
| { 37, 11500, 10375, 0x5a, }, |
| { 38, 11375, 10250, 0x59, }, |
| { 39, 11250, 10125, 0x58, }, |
| { 40, 11125, 10000, 0x57, }, |
| { 41, 11000, 9875, 0x56, }, |
| { 42, 10875, 9750, 0x55, }, |
| { 43, 10750, 9625, 0x54, }, |
| { 44, 10625, 9500, 0x53, }, |
| { 45, 10500, 9375, 0x52, }, |
| { 46, 10375, 9250, 0x51, }, |
| { 47, 10250, 9125, 0x50, }, |
| { 48, 10125, 9000, 0x4f, }, |
| { 49, 10000, 8875, 0x4e, }, |
| { 50, 9875, 8750, 0x4d, }, |
| { 51, 9750, 8625, 0x4c, }, |
| { 52, 9625, 8500, 0x4b, }, |
| { 53, 9500, 8375, 0x4a, }, |
| { 54, 9375, 8250, 0x49, }, |
| { 55, 9250, 8125, 0x48, }, |
| { 56, 9125, 8000, 0x47, }, |
| { 57, 9000, 7875, 0x46, }, |
| { 58, 8875, 7750, 0x45, }, |
| { 59, 8750, 7625, 0x44, }, |
| { 60, 8625, 7500, 0x43, }, |
| { 61, 8500, 7375, 0x42, }, |
| { 62, 8375, 7250, 0x41, }, |
| { 63, 8250, 7125, 0x40, }, |
| { 64, 8125, 7000, 0x3f, }, |
| { 65, 8000, 6875, 0x3e, }, |
| { 66, 7875, 6750, 0x3d, }, |
| { 67, 7750, 6625, 0x3c, }, |
| { 68, 7625, 6500, 0x3b, }, |
| { 69, 7500, 6375, 0x3a, }, |
| { 70, 7375, 6250, 0x39, }, |
| { 71, 7250, 6125, 0x38, }, |
| { 72, 7125, 6000, 0x37, }, |
| { 73, 7000, 5875, 0x36, }, |
| { 74, 6875, 5750, 0x35, }, |
| { 75, 6750, 5625, 0x34, }, |
| { 76, 6625, 5500, 0x33, }, |
| { 77, 6500, 5375, 0x32, }, |
| { 78, 6375, 5250, 0x31, }, |
| { 79, 6250, 5125, 0x30, }, |
| { 80, 6125, 5000, 0x2f, }, |
| { 81, 6000, 4875, 0x2e, }, |
| { 82, 5875, 4750, 0x2d, }, |
| { 83, 5750, 4625, 0x2c, }, |
| { 84, 5625, 4500, 0x2b, }, |
| { 85, 5500, 4375, 0x2a, }, |
| { 86, 5375, 4250, 0x29, }, |
| { 87, 5250, 4125, 0x28, }, |
| { 88, 5125, 4000, 0x27, }, |
| { 89, 5000, 3875, 0x26, }, |
| { 90, 4875, 3750, 0x25, }, |
| { 91, 4750, 3625, 0x24, }, |
| { 92, 4625, 3500, 0x23, }, |
| { 93, 4500, 3375, 0x22, }, |
| { 94, 4375, 3250, 0x21, }, |
| { 95, 4250, 3125, 0x20, }, |
| { 96, 4125, 3000, 0x1f, }, |
| { 97, 4125, 3000, 0x1e, }, |
| { 98, 4125, 3000, 0x1d, }, |
| { 99, 4125, 3000, 0x1c, }, |
| { 100, 4125, 3000, 0x1b, }, |
| { 101, 4125, 3000, 0x1a, }, |
| { 102, 4125, 3000, 0x19, }, |
| { 103, 4125, 3000, 0x18, }, |
| { 104, 4125, 3000, 0x17, }, |
| { 105, 4125, 3000, 0x16, }, |
| { 106, 4125, 3000, 0x15, }, |
| { 107, 4125, 3000, 0x14, }, |
| { 108, 4125, 3000, 0x13, }, |
| { 109, 4125, 3000, 0x12, }, |
| { 110, 4125, 3000, 0x11, }, |
| { 111, 4125, 3000, 0x10, }, |
| { 112, 4125, 3000, 0x0f, }, |
| { 113, 4125, 3000, 0x0e, }, |
| { 114, 4125, 3000, 0x0d, }, |
| { 115, 4125, 3000, 0x0c, }, |
| { 116, 4125, 3000, 0x0b, }, |
| { 117, 4125, 3000, 0x0a, }, |
| { 118, 4125, 3000, 0x09, }, |
| { 119, 4125, 3000, 0x08, }, |
| { 120, 1125, 0, 0x07, }, |
| { 121, 1000, 0, 0x06, }, |
| { 122, 875, 0, 0x05, }, |
| { 123, 750, 0, 0x04, }, |
| { 124, 625, 0, 0x03, }, |
| { 125, 500, 0, 0x02, }, |
| { 126, 375, 0, 0x01, }, |
| { 127, 0, 0, 0x00, }, |
| }; |
| |
| struct cparams { |
| int i; |
| int t; |
| int m; |
| int c; |
| }; |
| |
| static struct cparams cparams[] = { |
| { 1, 1333, 301, 28664 }, |
| { 1, 1066, 294, 24460 }, |
| { 1, 800, 294, 25192 }, |
| { 0, 1333, 276, 27605 }, |
| { 0, 1066, 276, 27605 }, |
| { 0, 800, 231, 23784 }, |
| }; |
| |
| unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) |
| { |
| u64 total_count, diff, ret; |
| u32 count1, count2, count3, m = 0, c = 0; |
| unsigned long now = jiffies_to_msecs(jiffies), diff1; |
| int i; |
| |
| diff1 = now - dev_priv->last_time1; |
| |
| count1 = I915_READ(DMIEC); |
| count2 = I915_READ(DDREC); |
| count3 = I915_READ(CSIEC); |
| |
| total_count = count1 + count2 + count3; |
| |
| /* FIXME: handle per-counter overflow */ |
| if (total_count < dev_priv->last_count1) { |
| diff = ~0UL - dev_priv->last_count1; |
| diff += total_count; |
| } else { |
| diff = total_count - dev_priv->last_count1; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(cparams); i++) { |
| if (cparams[i].i == dev_priv->c_m && |
| cparams[i].t == dev_priv->r_t) { |
| m = cparams[i].m; |
| c = cparams[i].c; |
| break; |
| } |
| } |
| |
| div_u64(diff, diff1); |
| ret = ((m * diff) + c); |
| div_u64(ret, 10); |
| |
| dev_priv->last_count1 = total_count; |
| dev_priv->last_time1 = now; |
| |
| return ret; |
| } |
| |
| unsigned long i915_mch_val(struct drm_i915_private *dev_priv) |
| { |
| unsigned long m, x, b; |
| u32 tsfs; |
| |
| tsfs = I915_READ(TSFS); |
| |
| m = ((tsfs & TSFS_SLOPE_MASK) >> TSFS_SLOPE_SHIFT); |
| x = I915_READ8(TR1); |
| |
| b = tsfs & TSFS_INTR_MASK; |
| |
| return ((m * x) / 127) - b; |
| } |
| |
| static unsigned long pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid) |
| { |
| unsigned long val = 0; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(v_table); i++) { |
| if (v_table[i].pvid == pxvid) { |
| if (IS_MOBILE(dev_priv->dev)) |
| val = v_table[i].vm; |
| else |
| val = v_table[i].vd; |
| } |
| } |
| |
| return val; |
| } |
| |
| void i915_update_gfx_val(struct drm_i915_private *dev_priv) |
| { |
| struct timespec now, diff1; |
| u64 diff; |
| unsigned long diffms; |
| u32 count; |
| |
| getrawmonotonic(&now); |
| diff1 = timespec_sub(now, dev_priv->last_time2); |
| |
| /* Don't divide by 0 */ |
| diffms = diff1.tv_sec * 1000 + diff1.tv_nsec / 1000000; |
| if (!diffms) |
| return; |
| |
| count = I915_READ(GFXEC); |
| |
| if (count < dev_priv->last_count2) { |
| diff = ~0UL - dev_priv->last_count2; |
| diff += count; |
| } else { |
| diff = count - dev_priv->last_count2; |
| } |
| |
| dev_priv->last_count2 = count; |
| dev_priv->last_time2 = now; |
| |
| /* More magic constants... */ |
| diff = diff * 1181; |
| div_u64(diff, diffms * 10); |
| dev_priv->gfx_power = diff; |
| } |
| |
| unsigned long i915_gfx_val(struct drm_i915_private *dev_priv) |
| { |
| unsigned long t, corr, state1, corr2, state2; |
| u32 pxvid, ext_v; |
| |
| pxvid = I915_READ(PXVFREQ_BASE + (dev_priv->cur_delay * 4)); |
| pxvid = (pxvid >> 24) & 0x7f; |
| ext_v = pvid_to_extvid(dev_priv, pxvid); |
| |
| state1 = ext_v; |
| |
| t = i915_mch_val(dev_priv); |
| |
| /* Revel in the empirically derived constants */ |
| |
| /* Correction factor in 1/100000 units */ |
| if (t > 80) |
| corr = ((t * 2349) + 135940); |
| else if (t >= 50) |
| corr = ((t * 964) + 29317); |
| else /* < 50 */ |
| corr = ((t * 301) + 1004); |
| |
| corr = corr * ((150142 * state1) / 10000 - 78642); |
| corr /= 100000; |
| corr2 = (corr * dev_priv->corr); |
| |
| state2 = (corr2 * state1) / 10000; |
| state2 /= 100; /* convert to mW */ |
| |
| i915_update_gfx_val(dev_priv); |
| |
| return dev_priv->gfx_power + state2; |
| } |
| |
| /* Global for IPS driver to get at the current i915 device */ |
| static struct drm_i915_private *i915_mch_dev; |
| /* |
| * Lock protecting IPS related data structures |
| * - i915_mch_dev |
| * - dev_priv->max_delay |
| * - dev_priv->min_delay |
| * - dev_priv->fmax |
| * - dev_priv->gpu_busy |
| */ |
| static DEFINE_SPINLOCK(mchdev_lock); |
| |
| /** |
| * i915_read_mch_val - return value for IPS use |
| * |
| * Calculate and return a value for the IPS driver to use when deciding whether |
| * we have thermal and power headroom to increase CPU or GPU power budget. |
| */ |
| unsigned long i915_read_mch_val(void) |
| { |
| struct drm_i915_private *dev_priv; |
| unsigned long chipset_val, graphics_val, ret = 0; |
| |
| spin_lock(&mchdev_lock); |
| if (!i915_mch_dev) |
| goto out_unlock; |
| dev_priv = i915_mch_dev; |
| |
| chipset_val = i915_chipset_val(dev_priv); |
| graphics_val = i915_gfx_val(dev_priv); |
| |
| ret = chipset_val + graphics_val; |
| |
| out_unlock: |
| spin_unlock(&mchdev_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i915_read_mch_val); |
| |
| /** |
| * i915_gpu_raise - raise GPU frequency limit |
| * |
| * Raise the limit; IPS indicates we have thermal headroom. |
| */ |
| bool i915_gpu_raise(void) |
| { |
| struct drm_i915_private *dev_priv; |
| bool ret = true; |
| |
| spin_lock(&mchdev_lock); |
| if (!i915_mch_dev) { |
| ret = false; |
| goto out_unlock; |
| } |
| dev_priv = i915_mch_dev; |
| |
| if (dev_priv->max_delay > dev_priv->fmax) |
| dev_priv->max_delay--; |
| |
| out_unlock: |
| spin_unlock(&mchdev_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i915_gpu_raise); |
| |
| /** |
| * i915_gpu_lower - lower GPU frequency limit |
| * |
| * IPS indicates we're close to a thermal limit, so throttle back the GPU |
| * frequency maximum. |
| */ |
| bool i915_gpu_lower(void) |
| { |
| struct drm_i915_private *dev_priv; |
| bool ret = true; |
| |
| spin_lock(&mchdev_lock); |
| if (!i915_mch_dev) { |
| ret = false; |
| goto out_unlock; |
| } |
| dev_priv = i915_mch_dev; |
| |
| if (dev_priv->max_delay < dev_priv->min_delay) |
| dev_priv->max_delay++; |
| |
| out_unlock: |
| spin_unlock(&mchdev_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i915_gpu_lower); |
| |
| /** |
| * i915_gpu_busy - indicate GPU business to IPS |
| * |
| * Tell the IPS driver whether or not the GPU is busy. |
| */ |
| bool i915_gpu_busy(void) |
| { |
| struct drm_i915_private *dev_priv; |
| bool ret = false; |
| |
| spin_lock(&mchdev_lock); |
| if (!i915_mch_dev) |
| goto out_unlock; |
| dev_priv = i915_mch_dev; |
| |
| ret = dev_priv->busy; |
| |
| out_unlock: |
| spin_unlock(&mchdev_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i915_gpu_busy); |
| |
| /** |
| * i915_gpu_turbo_disable - disable graphics turbo |
| * |
| * Disable graphics turbo by resetting the max frequency and setting the |
| * current frequency to the default. |
| */ |
| bool i915_gpu_turbo_disable(void) |
| { |
| struct drm_i915_private *dev_priv; |
| bool ret = true; |
| |
| spin_lock(&mchdev_lock); |
| if (!i915_mch_dev) { |
| ret = false; |
| goto out_unlock; |
| } |
| dev_priv = i915_mch_dev; |
| |
| dev_priv->max_delay = dev_priv->fstart; |
| |
| if (!ironlake_set_drps(dev_priv->dev, dev_priv->fstart)) |
| ret = false; |
| |
| out_unlock: |
| spin_unlock(&mchdev_lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable); |
| |
| /** |
| * i915_driver_load - setup chip and create an initial config |
| * @dev: DRM device |
| * @flags: startup flags |
| * |
| * The driver load routine has to do several things: |
| * - drive output discovery via intel_modeset_init() |
| * - initialize the memory manager |
| * - allocate initial config memory |
| * - setup the DRM framebuffer with the allocated memory |
| */ |
| int i915_driver_load(struct drm_device *dev, unsigned long flags) |
| { |
| struct drm_i915_private *dev_priv; |
| resource_size_t base, size; |
| int ret = 0, mmio_bar; |
| uint32_t agp_size, prealloc_size; |
| /* i915 has 4 more counters */ |
| dev->counters += 4; |
| dev->types[6] = _DRM_STAT_IRQ; |
| dev->types[7] = _DRM_STAT_PRIMARY; |
| dev->types[8] = _DRM_STAT_SECONDARY; |
| dev->types[9] = _DRM_STAT_DMA; |
| |
| dev_priv = kzalloc(sizeof(drm_i915_private_t), GFP_KERNEL); |
| if (dev_priv == NULL) |
| return -ENOMEM; |
| |
| dev->dev_private = (void *)dev_priv; |
| dev_priv->dev = dev; |
| dev_priv->info = (struct intel_device_info *) flags; |
| |
| /* Add register map (needed for suspend/resume) */ |
| mmio_bar = IS_I9XX(dev) ? 0 : 1; |
| base = pci_resource_start(dev->pdev, mmio_bar); |
| size = pci_resource_len(dev->pdev, mmio_bar); |
| |
| if (i915_get_bridge_dev(dev)) { |
| ret = -EIO; |
| goto free_priv; |
| } |
| |
| /* overlay on gen2 is broken and can't address above 1G */ |
| if (IS_GEN2(dev)) |
| dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30)); |
| |
| dev_priv->regs = ioremap(base, size); |
| if (!dev_priv->regs) { |
| DRM_ERROR("failed to map registers\n"); |
| ret = -EIO; |
| goto put_bridge; |
| } |
| |
| dev_priv->mm.gtt_mapping = |
| io_mapping_create_wc(dev->agp->base, |
| dev->agp->agp_info.aper_size * 1024*1024); |
| if (dev_priv->mm.gtt_mapping == NULL) { |
| ret = -EIO; |
| goto out_rmmap; |
| } |
| |
| /* Set up a WC MTRR for non-PAT systems. This is more common than |
| * one would think, because the kernel disables PAT on first |
| * generation Core chips because WC PAT gets overridden by a UC |
| * MTRR if present. Even if a UC MTRR isn't present. |
| */ |
| dev_priv->mm.gtt_mtrr = mtrr_add(dev->agp->base, |
| dev->agp->agp_info.aper_size * |
| 1024 * 1024, |
| MTRR_TYPE_WRCOMB, 1); |
| if (dev_priv->mm.gtt_mtrr < 0) { |
| DRM_INFO("MTRR allocation failed. Graphics " |
| "performance may suffer.\n"); |
| } |
| |
| dev_priv->mm.gtt = intel_gtt_get(); |
| if (!dev_priv->mm.gtt) { |
| DRM_ERROR("Failed to initialize GTT\n"); |
| ret = -ENODEV; |
| goto out_iomapfree; |
| } |
| |
| prealloc_size = dev_priv->mm.gtt->gtt_stolen_entries << PAGE_SHIFT; |
| agp_size = dev_priv->mm.gtt->gtt_mappable_entries << PAGE_SHIFT; |
| |
| /* The i915 workqueue is primarily used for batched retirement of |
| * requests (and thus managing bo) once the task has been completed |
| * by the GPU. i915_gem_retire_requests() is called directly when we |
| * need high-priority retirement, such as waiting for an explicit |
| * bo. |
| * |
| * It is also used for periodic low-priority events, such as |
| * idle-timers and hangcheck. |
| * |
| * All tasks on the workqueue are expected to acquire the dev mutex |
| * so there is no point in running more than one instance of the |
| * workqueue at any time: max_active = 1 and NON_REENTRANT. |
| */ |
| dev_priv->wq = alloc_workqueue("i915", |
| WQ_UNBOUND | WQ_NON_REENTRANT, |
| 1); |
| if (dev_priv->wq == NULL) { |
| DRM_ERROR("Failed to create our workqueue.\n"); |
| ret = -ENOMEM; |
| goto out_iomapfree; |
| } |
| |
| /* enable GEM by default */ |
| dev_priv->has_gem = 1; |
| |
| if (prealloc_size > agp_size * 3 / 4) { |
| DRM_ERROR("Detected broken video BIOS with %d/%dkB of video " |
| "memory stolen.\n", |
| prealloc_size / 1024, agp_size / 1024); |
| DRM_ERROR("Disabling GEM. (try reducing stolen memory or " |
| "updating the BIOS to fix).\n"); |
| dev_priv->has_gem = 0; |
| } |
| |
| if (dev_priv->has_gem == 0 && |
| drm_core_check_feature(dev, DRIVER_MODESET)) { |
| DRM_ERROR("kernel modesetting requires GEM, disabling driver.\n"); |
| ret = -ENODEV; |
| goto out_iomapfree; |
| } |
| |
| dev->driver->get_vblank_counter = i915_get_vblank_counter; |
| dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ |
| if (IS_G4X(dev) || IS_IRONLAKE(dev) || IS_GEN6(dev)) { |
| dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */ |
| dev->driver->get_vblank_counter = gm45_get_vblank_counter; |
| } |
| |
| /* Try to make sure MCHBAR is enabled before poking at it */ |
| intel_setup_mchbar(dev); |
| intel_setup_gmbus(dev); |
| intel_opregion_setup(dev); |
| |
| i915_gem_load(dev); |
| |
| /* Init HWS */ |
| if (!I915_NEED_GFX_HWS(dev)) { |
| ret = i915_init_phys_hws(dev); |
| if (ret != 0) |
| goto out_workqueue_free; |
| } |
| |
| if (IS_PINEVIEW(dev)) |
| i915_pineview_get_mem_freq(dev); |
| else if (IS_IRONLAKE(dev)) |
| i915_ironlake_get_mem_freq(dev); |
| |
| /* On the 945G/GM, the chipset reports the MSI capability on the |
| * integrated graphics even though the support isn't actually there |
| * according to the published specs. It doesn't appear to function |
| * correctly in testing on 945G. |
| * This may be a side effect of MSI having been made available for PEG |
| * and the registers being closely associated. |
| * |
| * According to chipset errata, on the 965GM, MSI interrupts may |
| * be lost or delayed, but we use them anyways to avoid |
| * stuck interrupts on some machines. |
| */ |
| if (!IS_I945G(dev) && !IS_I945GM(dev)) |
| pci_enable_msi(dev->pdev); |
| |
| spin_lock_init(&dev_priv->user_irq_lock); |
| spin_lock_init(&dev_priv->error_lock); |
| dev_priv->trace_irq_seqno = 0; |
| |
| ret = drm_vblank_init(dev, I915_NUM_PIPE); |
| |
| if (ret) { |
| (void) i915_driver_unload(dev); |
| return ret; |
| } |
| |
| /* Start out suspended */ |
| dev_priv->mm.suspended = 1; |
| |
| intel_detect_pch(dev); |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| ret = i915_load_modeset_init(dev, prealloc_size, agp_size); |
| if (ret < 0) { |
| DRM_ERROR("failed to init modeset\n"); |
| goto out_workqueue_free; |
| } |
| } |
| |
| /* Must be done after probing outputs */ |
| intel_opregion_init(dev); |
| acpi_video_register(); |
| |
| setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed, |
| (unsigned long) dev); |
| |
| spin_lock(&mchdev_lock); |
| i915_mch_dev = dev_priv; |
| dev_priv->mchdev_lock = &mchdev_lock; |
| spin_unlock(&mchdev_lock); |
| |
| return 0; |
| |
| out_workqueue_free: |
| destroy_workqueue(dev_priv->wq); |
| out_iomapfree: |
| io_mapping_free(dev_priv->mm.gtt_mapping); |
| out_rmmap: |
| iounmap(dev_priv->regs); |
| put_bridge: |
| pci_dev_put(dev_priv->bridge_dev); |
| free_priv: |
| kfree(dev_priv); |
| return ret; |
| } |
| |
| int i915_driver_unload(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| |
| spin_lock(&mchdev_lock); |
| i915_mch_dev = NULL; |
| spin_unlock(&mchdev_lock); |
| |
| mutex_lock(&dev->struct_mutex); |
| ret = i915_gpu_idle(dev); |
| if (ret) |
| DRM_ERROR("failed to idle hardware: %d\n", ret); |
| mutex_unlock(&dev->struct_mutex); |
| |
| /* Cancel the retire work handler, which should be idle now. */ |
| cancel_delayed_work_sync(&dev_priv->mm.retire_work); |
| |
| io_mapping_free(dev_priv->mm.gtt_mapping); |
| if (dev_priv->mm.gtt_mtrr >= 0) { |
| mtrr_del(dev_priv->mm.gtt_mtrr, dev->agp->base, |
| dev->agp->agp_info.aper_size * 1024 * 1024); |
| dev_priv->mm.gtt_mtrr = -1; |
| } |
| |
| acpi_video_unregister(); |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| intel_modeset_cleanup(dev); |
| |
| /* |
| * free the memory space allocated for the child device |
| * config parsed from VBT |
| */ |
| if (dev_priv->child_dev && dev_priv->child_dev_num) { |
| kfree(dev_priv->child_dev); |
| dev_priv->child_dev = NULL; |
| dev_priv->child_dev_num = 0; |
| } |
| |
| vga_switcheroo_unregister_client(dev->pdev); |
| vga_client_register(dev->pdev, NULL, NULL, NULL); |
| } |
| |
| /* Free error state after interrupts are fully disabled. */ |
| del_timer_sync(&dev_priv->hangcheck_timer); |
| cancel_work_sync(&dev_priv->error_work); |
| i915_destroy_error_state(dev); |
| |
| if (dev->pdev->msi_enabled) |
| pci_disable_msi(dev->pdev); |
| |
| if (dev_priv->regs != NULL) |
| iounmap(dev_priv->regs); |
| |
| intel_opregion_fini(dev); |
| |
| if (drm_core_check_feature(dev, DRIVER_MODESET)) { |
| /* Flush any outstanding unpin_work. */ |
| flush_workqueue(dev_priv->wq); |
| |
| i915_gem_free_all_phys_object(dev); |
| |
| mutex_lock(&dev->struct_mutex); |
| i915_gem_cleanup_ringbuffer(dev); |
| mutex_unlock(&dev->struct_mutex); |
| if (I915_HAS_FBC(dev) && i915_powersave) |
| i915_cleanup_compression(dev); |
| drm_mm_takedown(&dev_priv->mm.vram); |
| |
| intel_cleanup_overlay(dev); |
| } |
| |
| intel_teardown_gmbus(dev); |
| intel_teardown_mchbar(dev); |
| |
| destroy_workqueue(dev_priv->wq); |
| |
| pci_dev_put(dev_priv->bridge_dev); |
| kfree(dev->dev_private); |
| |
| return 0; |
| } |
| |
| int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv) |
| { |
| struct drm_i915_file_private *i915_file_priv; |
| |
| DRM_DEBUG_DRIVER("\n"); |
| i915_file_priv = (struct drm_i915_file_private *) |
| kmalloc(sizeof(*i915_file_priv), GFP_KERNEL); |
| |
| if (!i915_file_priv) |
| return -ENOMEM; |
| |
| file_priv->driver_priv = i915_file_priv; |
| |
| INIT_LIST_HEAD(&i915_file_priv->mm.request_list); |
| |
| return 0; |
| } |
| |
| /** |
| * i915_driver_lastclose - clean up after all DRM clients have exited |
| * @dev: DRM device |
| * |
| * Take care of cleaning up after all DRM clients have exited. In the |
| * mode setting case, we want to restore the kernel's initial mode (just |
| * in case the last client left us in a bad state). |
| * |
| * Additionally, in the non-mode setting case, we'll tear down the AGP |
| * and DMA structures, since the kernel won't be using them, and clea |
| * up any GEM state. |
| */ |
| void i915_driver_lastclose(struct drm_device * dev) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| |
| if (!dev_priv || drm_core_check_feature(dev, DRIVER_MODESET)) { |
| drm_fb_helper_restore(); |
| vga_switcheroo_process_delayed_switch(); |
| return; |
| } |
| |
| i915_gem_lastclose(dev); |
| |
| if (dev_priv->agp_heap) |
| i915_mem_takedown(&(dev_priv->agp_heap)); |
| |
| i915_dma_cleanup(dev); |
| } |
| |
| void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv) |
| { |
| drm_i915_private_t *dev_priv = dev->dev_private; |
| i915_gem_release(dev, file_priv); |
| if (!drm_core_check_feature(dev, DRIVER_MODESET)) |
| i915_mem_release(dev, file_priv, dev_priv->agp_heap); |
| } |
| |
| void i915_driver_postclose(struct drm_device *dev, struct drm_file *file_priv) |
| { |
| struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv; |
| |
| kfree(i915_file_priv); |
| } |
| |
| struct drm_ioctl_desc i915_ioctls[] = { |
| DRM_IOCTL_DEF_DRV(I915_INIT, i915_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_FLUSH, i915_flush_ioctl, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_FLIP, i915_flip_bufs, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, i915_batchbuffer, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, i915_irq_emit, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, i915_irq_wait, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_SETPARAM, i915_setparam, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_ALLOC, i915_mem_alloc, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_FREE, i915_mem_free, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, i915_mem_init_heap, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, i915_cmdbuffer, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, i915_mem_destroy_heap, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, i915_vblank_pipe_set, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, i915_vblank_pipe_get, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, i915_vblank_swap, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY), |
| DRM_IOCTL_DEF_DRV(I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, i915_gem_entervt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, i915_gem_leavevt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), |
| DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED), |
| }; |
| |
| int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls); |
| |
| /** |
| * Determine if the device really is AGP or not. |
| * |
| * All Intel graphics chipsets are treated as AGP, even if they are really |
| * PCI-e. |
| * |
| * \param dev The device to be tested. |
| * |
| * \returns |
| * A value of 1 is always retured to indictate every i9x5 is AGP. |
| */ |
| int i915_driver_device_is_agp(struct drm_device * dev) |
| { |
| return 1; |
| } |