arch/arm/plat-nomadik/include/plat/ste_dma40.h - kernel/msm-4.9 - Gitiles

 /*
  * arch/arm/plat-nomadik/include/plat/ste_dma40.h
  *
  * Copyright (C) ST-Ericsson 2007-2010
  * License terms: GNU General Public License (GPL) version 2
  * Author: Per Friden <per.friden@stericsson.com>
  * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
  */


 #ifndef STE_DMA40_H
 #define STE_DMA40_H

 #include <linux/dmaengine.h>
 #include <linux/workqueue.h>
 #include <linux/interrupt.h>
 #include <linux/dmaengine.h>

 /* dev types for memcpy */
 #define STEDMA40_DEV_DST_MEMORY (-1)
 #define	STEDMA40_DEV_SRC_MEMORY (-1)

 /*
  * Description of bitfields of channel_type variable is available in
  * the info structure.
  */

 /* Priority */
 #define STEDMA40_INFO_PRIO_TYPE_POS 2
 #define STEDMA40_HIGH_PRIORITY_CHANNEL (0x1 << STEDMA40_INFO_PRIO_TYPE_POS)
 #define STEDMA40_LOW_PRIORITY_CHANNEL (0x2 << STEDMA40_INFO_PRIO_TYPE_POS)

 /* Mode  */
 #define STEDMA40_INFO_CH_MODE_TYPE_POS 6
 #define STEDMA40_CHANNEL_IN_PHY_MODE (0x1 << STEDMA40_INFO_CH_MODE_TYPE_POS)
 #define STEDMA40_CHANNEL_IN_LOG_MODE (0x2 << STEDMA40_INFO_CH_MODE_TYPE_POS)
 #define STEDMA40_CHANNEL_IN_OPER_MODE (0x3 << STEDMA40_INFO_CH_MODE_TYPE_POS)

 /* Mode options */
 #define STEDMA40_INFO_CH_MODE_OPT_POS 8
 #define STEDMA40_PCHAN_BASIC_MODE (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
 #define STEDMA40_PCHAN_MODULO_MODE (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
 #define STEDMA40_PCHAN_DOUBLE_DST_MODE (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
 #define STEDMA40_LCHAN_SRC_PHY_DST_LOG (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
 #define STEDMA40_LCHAN_SRC_LOG_DST_PHS (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
 #define STEDMA40_LCHAN_SRC_LOG_DST_LOG (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)

 /* Interrupt */
 #define STEDMA40_INFO_TIM_POS 10
 #define STEDMA40_NO_TIM_FOR_LINK (0x0 << STEDMA40_INFO_TIM_POS)
 #define STEDMA40_TIM_FOR_LINK (0x1 << STEDMA40_INFO_TIM_POS)

 /* End of channel_type configuration */

 #define STEDMA40_ESIZE_8_BIT  0x0
 #define STEDMA40_ESIZE_16_BIT 0x1
 #define STEDMA40_ESIZE_32_BIT 0x2
 #define STEDMA40_ESIZE_64_BIT 0x3

 /* The value 4 indicates that PEN-reg shall be set to 0 */
 #define STEDMA40_PSIZE_PHY_1  0x4
 #define STEDMA40_PSIZE_PHY_2  0x0
 #define STEDMA40_PSIZE_PHY_4  0x1
 #define STEDMA40_PSIZE_PHY_8  0x2
 #define STEDMA40_PSIZE_PHY_16 0x3

 /*
  * The number of elements differ in logical and
  * physical mode
  */
 #define STEDMA40_PSIZE_LOG_1  STEDMA40_PSIZE_PHY_2
 #define STEDMA40_PSIZE_LOG_4  STEDMA40_PSIZE_PHY_4
 #define STEDMA40_PSIZE_LOG_8  STEDMA40_PSIZE_PHY_8
 #define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16

 enum stedma40_flow_ctrl {
 	STEDMA40_NO_FLOW_CTRL,
 	STEDMA40_FLOW_CTRL,
 };

 enum stedma40_endianess {
 	STEDMA40_LITTLE_ENDIAN,
 	STEDMA40_BIG_ENDIAN
 };

 enum stedma40_periph_data_width {
 	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
 	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
 	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
 	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
 };

 struct stedma40_half_channel_info {
 	enum stedma40_endianess endianess;
 	enum stedma40_periph_data_width data_width;
 	int psize;
 	enum stedma40_flow_ctrl flow_ctrl;
 };

 enum stedma40_xfer_dir {
 	STEDMA40_MEM_TO_MEM,
 	STEDMA40_MEM_TO_PERIPH,
 	STEDMA40_PERIPH_TO_MEM,
 	STEDMA40_PERIPH_TO_PERIPH
 };


 /**
  * struct stedma40_chan_cfg - Structure to be filled by client drivers.
  *
  * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
  * @channel_type: priority, mode, mode options and interrupt configuration.
  * @src_dev_type: Src device type
  * @dst_dev_type: Dst device type
  * @src_info: Parameters for dst half channel
  * @dst_info: Parameters for dst half channel
  * @pre_transfer_data: Data to be passed on to the pre_transfer() function.
  * @pre_transfer: Callback used if needed before preparation of transfer.
  * Only called if device is set. size of bytes to transfer
  * (in case of multiple element transfer size is size of the first element).
  *
  *
  * This structure has to be filled by the client drivers.
  * It is recommended to do all dma configurations for clients in the machine.
  *
  */
 struct stedma40_chan_cfg {
 	enum stedma40_xfer_dir			 dir;
 	unsigned int				 channel_type;
 	int					 src_dev_type;
 	int					 dst_dev_type;
 	struct stedma40_half_channel_info	 src_info;
 	struct stedma40_half_channel_info	 dst_info;
 	void					*pre_transfer_data;
 	int (*pre_transfer)			(struct dma_chan *chan,
 						 void *data,
 						 int size);
 };

 /**
  * struct stedma40_platform_data - Configuration struct for the dma device.
  *
  * @dev_len: length of dev_tx and dev_rx
  * @dev_tx: mapping between destination event line and io address
  * @dev_rx: mapping between source event line and io address
  * @memcpy: list of memcpy event lines
  * @memcpy_len: length of memcpy
  * @memcpy_conf_phy: default configuration of physical channel memcpy
  * @memcpy_conf_log: default configuration of logical channel memcpy
  * @llis_per_log: number of max linked list items per logical channel
  * @disabled_channels: A vector, ending with -1, that marks physical channels
  * that are for different reasons not available for the driver.
  */
 struct stedma40_platform_data {
 	u32				 dev_len;
 	const dma_addr_t		*dev_tx;
 	const dma_addr_t		*dev_rx;
 	int				*memcpy;
 	u32				 memcpy_len;
 	struct stedma40_chan_cfg	*memcpy_conf_phy;
 	struct stedma40_chan_cfg	*memcpy_conf_log;
 	unsigned int			 llis_per_log;
 	int				 disabled_channels[8];
 };

 /**
  * setdma40_set_psize() - Used for changing the package size of an
  * already configured dma channel.
  *
  * @chan: dmaengine handle
  * @src_psize: new package side for src. (STEDMA40_PSIZE*)
  * @src_psize: new package side for dst. (STEDMA40_PSIZE*)
  *
  * returns 0 on ok, otherwise negative error number.
  */
 int stedma40_set_psize(struct dma_chan *chan,
 		       int src_psize,
 		       int dst_psize);

 /**
  * stedma40_filter() - Provides stedma40_chan_cfg to the
  * ste_dma40 dma driver via the dmaengine framework.
  * does some checking of what's provided.
  *
  * Never directly called by client. It used by dmaengine.
  * @chan: dmaengine handle.
  * @data: Must be of type: struct stedma40_chan_cfg and is
  * the configuration of the framework.
  *
  *
  */

 bool stedma40_filter(struct dma_chan *chan, void *data);

 /**
  * stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from
  * scattergatter lists.
  *
  * @chan: dmaengine handle
  * @sgl_dst: Destination scatter list
  * @sgl_src: Source scatter list
  * @sgl_len: The length of each scatterlist. Both lists must be of equal length
  * and each element must match the corresponding element in the other scatter
  * list.
  * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
  */

 struct dma_async_tx_descriptor *stedma40_memcpy_sg(struct dma_chan *chan,
 						   struct scatterlist *sgl_dst,
 						   struct scatterlist *sgl_src,
 						   unsigned int sgl_len,
 						   unsigned long flags);

 /**
  * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
  * (=device)
  *
  * @chan: dmaengine handle
  * @addr: source or destination physicall address.
  * @size: bytes to transfer
  * @direction: direction of transfer
  * @flags: is actually enum dma_ctrl_flags. See dmaengine.h
  */

 static inline struct
 dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan,
 					    dma_addr_t addr,
 					    unsigned int size,
 					    enum dma_data_direction direction,
 					    unsigned long flags)
 {
 	struct scatterlist sg;
 	sg_init_table(&sg, 1);
 	sg.dma_address = addr;
 	sg.length = size;

 	return chan->device->device_prep_slave_sg(chan, &sg, 1,
 						  direction, flags);
 }

 #endif
	/*
	* arch/arm/plat-nomadik/include/plat/ste_dma40.h
	*
	* Copyright (C) ST-Ericsson 2007-2010
	* License terms: GNU General Public License (GPL) version 2
	* Author: Per Friden <per.friden@stericsson.com>
	* Author: Jonas Aaberg <jonas.aberg@stericsson.com>
	*/


	#ifndef STE_DMA40_H
	#define STE_DMA40_H

	#include <linux/dmaengine.h>
	#include <linux/workqueue.h>
	#include <linux/interrupt.h>
	#include <linux/dmaengine.h>

	/* dev types for memcpy */
	#define STEDMA40_DEV_DST_MEMORY (-1)
	#define STEDMA40_DEV_SRC_MEMORY (-1)

	/*
	* Description of bitfields of channel_type variable is available in
	* the info structure.
	*/

	/* Priority */
	#define STEDMA40_INFO_PRIO_TYPE_POS 2
	#define STEDMA40_HIGH_PRIORITY_CHANNEL (0x1 << STEDMA40_INFO_PRIO_TYPE_POS)
	#define STEDMA40_LOW_PRIORITY_CHANNEL (0x2 << STEDMA40_INFO_PRIO_TYPE_POS)

	/* Mode */
	#define STEDMA40_INFO_CH_MODE_TYPE_POS 6
	#define STEDMA40_CHANNEL_IN_PHY_MODE (0x1 << STEDMA40_INFO_CH_MODE_TYPE_POS)
	#define STEDMA40_CHANNEL_IN_LOG_MODE (0x2 << STEDMA40_INFO_CH_MODE_TYPE_POS)
	#define STEDMA40_CHANNEL_IN_OPER_MODE (0x3 << STEDMA40_INFO_CH_MODE_TYPE_POS)

	/* Mode options */
	#define STEDMA40_INFO_CH_MODE_OPT_POS 8
	#define STEDMA40_PCHAN_BASIC_MODE (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
	#define STEDMA40_PCHAN_MODULO_MODE (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
	#define STEDMA40_PCHAN_DOUBLE_DST_MODE (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)
	#define STEDMA40_LCHAN_SRC_PHY_DST_LOG (0x1 << STEDMA40_INFO_CH_MODE_OPT_POS)
	#define STEDMA40_LCHAN_SRC_LOG_DST_PHS (0x2 << STEDMA40_INFO_CH_MODE_OPT_POS)
	#define STEDMA40_LCHAN_SRC_LOG_DST_LOG (0x3 << STEDMA40_INFO_CH_MODE_OPT_POS)

	/* Interrupt */
	#define STEDMA40_INFO_TIM_POS 10
	#define STEDMA40_NO_TIM_FOR_LINK (0x0 << STEDMA40_INFO_TIM_POS)
	#define STEDMA40_TIM_FOR_LINK (0x1 << STEDMA40_INFO_TIM_POS)

	/* End of channel_type configuration */

	#define STEDMA40_ESIZE_8_BIT 0x0
	#define STEDMA40_ESIZE_16_BIT 0x1
	#define STEDMA40_ESIZE_32_BIT 0x2
	#define STEDMA40_ESIZE_64_BIT 0x3

	/* The value 4 indicates that PEN-reg shall be set to 0 */
	#define STEDMA40_PSIZE_PHY_1 0x4
	#define STEDMA40_PSIZE_PHY_2 0x0
	#define STEDMA40_PSIZE_PHY_4 0x1
	#define STEDMA40_PSIZE_PHY_8 0x2
	#define STEDMA40_PSIZE_PHY_16 0x3

	/*
	* The number of elements differ in logical and
	* physical mode
	*/
	#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2
	#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4
	#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8
	#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16

	enum stedma40_flow_ctrl {
	STEDMA40_NO_FLOW_CTRL,
	STEDMA40_FLOW_CTRL,
	};

	enum stedma40_endianess {
	STEDMA40_LITTLE_ENDIAN,
	STEDMA40_BIG_ENDIAN
	};

	enum stedma40_periph_data_width {
	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
	};

	struct stedma40_half_channel_info {
	enum stedma40_endianess endianess;
	enum stedma40_periph_data_width data_width;
	int psize;
	enum stedma40_flow_ctrl flow_ctrl;
	};

	enum stedma40_xfer_dir {
	STEDMA40_MEM_TO_MEM,
	STEDMA40_MEM_TO_PERIPH,
	STEDMA40_PERIPH_TO_MEM,
	STEDMA40_PERIPH_TO_PERIPH
	};


	/**
	* struct stedma40_chan_cfg - Structure to be filled by client drivers.
	*
	* @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH
	* @channel_type: priority, mode, mode options and interrupt configuration.
	* @src_dev_type: Src device type
	* @dst_dev_type: Dst device type
	* @src_info: Parameters for dst half channel
	* @dst_info: Parameters for dst half channel
	* @pre_transfer_data: Data to be passed on to the pre_transfer() function.
	* @pre_transfer: Callback used if needed before preparation of transfer.
	* Only called if device is set. size of bytes to transfer
	* (in case of multiple element transfer size is size of the first element).
	*
	*
	* This structure has to be filled by the client drivers.
	* It is recommended to do all dma configurations for clients in the machine.
	*
	*/
	struct stedma40_chan_cfg {
	enum stedma40_xfer_dir dir;
	unsigned int channel_type;
	int src_dev_type;
	int dst_dev_type;
	struct stedma40_half_channel_info src_info;
	struct stedma40_half_channel_info dst_info;
	void *pre_transfer_data;
	int (pre_transfer) (struct dma_chan chan,
	void *data,
	int size);
	};

	/**
	* struct stedma40_platform_data - Configuration struct for the dma device.
	*
	* @dev_len: length of dev_tx and dev_rx
	* @dev_tx: mapping between destination event line and io address
	* @dev_rx: mapping between source event line and io address
	* @memcpy: list of memcpy event lines
	* @memcpy_len: length of memcpy
	* @memcpy_conf_phy: default configuration of physical channel memcpy
	* @memcpy_conf_log: default configuration of logical channel memcpy
	* @llis_per_log: number of max linked list items per logical channel
	* @disabled_channels: A vector, ending with -1, that marks physical channels
	* that are for different reasons not available for the driver.
	*/
	struct stedma40_platform_data {
	u32 dev_len;
	const dma_addr_t *dev_tx;
	const dma_addr_t *dev_rx;
	int *memcpy;
	u32 memcpy_len;
	struct stedma40_chan_cfg *memcpy_conf_phy;
	struct stedma40_chan_cfg *memcpy_conf_log;
	unsigned int llis_per_log;
	int disabled_channels[8];
	};

	/**
	* setdma40_set_psize() - Used for changing the package size of an
	* already configured dma channel.
	*
	* @chan: dmaengine handle
	* @src_psize: new package side for src. (STEDMA40_PSIZE*)
	* @src_psize: new package side for dst. (STEDMA40_PSIZE*)
	*
	* returns 0 on ok, otherwise negative error number.
	*/
	int stedma40_set_psize(struct dma_chan *chan,
	int src_psize,
	int dst_psize);

	/**
	* stedma40_filter() - Provides stedma40_chan_cfg to the
	* ste_dma40 dma driver via the dmaengine framework.
	* does some checking of what's provided.
	*
	* Never directly called by client. It used by dmaengine.
	* @chan: dmaengine handle.
	* @data: Must be of type: struct stedma40_chan_cfg and is
	* the configuration of the framework.
	*
	*
	*/

	bool stedma40_filter(struct dma_chan chan, void data);

	/**
	* stedma40_memcpy_sg() - extension of the dma framework, memcpy to/from
	* scattergatter lists.
	*
	* @chan: dmaengine handle
	* @sgl_dst: Destination scatter list
	* @sgl_src: Source scatter list
	* @sgl_len: The length of each scatterlist. Both lists must be of equal length
	* and each element must match the corresponding element in the other scatter
	* list.
	* @flags: is actually enum dma_ctrl_flags. See dmaengine.h
	*/

	struct dma_async_tx_descriptor stedma40_memcpy_sg(struct dma_chan chan,
	struct scatterlist *sgl_dst,
	struct scatterlist *sgl_src,
	unsigned int sgl_len,
	unsigned long flags);

	/**
	* stedma40_slave_mem() - Transfers a raw data buffer to or from a slave
	* (=device)
	*
	* @chan: dmaengine handle
	* @addr: source or destination physicall address.
	* @size: bytes to transfer
	* @direction: direction of transfer
	* @flags: is actually enum dma_ctrl_flags. See dmaengine.h
	*/

	static inline struct
	dma_async_tx_descriptor stedma40_slave_mem(struct dma_chan chan,
	dma_addr_t addr,
	unsigned int size,
	enum dma_data_direction direction,
	unsigned long flags)
	{
	struct scatterlist sg;
	sg_init_table(&sg, 1);
	sg.dma_address = addr;
	sg.length = size;

	return chan->device->device_prep_slave_sg(chan, &sg, 1,
	direction, flags);
	}

	#endif