| /* |
| * w1_therm.c |
| * |
| * Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru> |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the therms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <asm/types.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/device.h> |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| |
| #include "w1.h" |
| #include "w1_io.h" |
| #include "w1_int.h" |
| #include "w1_family.h" |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>"); |
| MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, temperature family."); |
| |
| static u8 bad_roms[][9] = { |
| {0xaa, 0x00, 0x4b, 0x46, 0xff, 0xff, 0x0c, 0x10, 0x87}, |
| {} |
| }; |
| |
| static ssize_t w1_therm_read_name(struct device *, char *); |
| static ssize_t w1_therm_read_temp(struct device *, char *); |
| static ssize_t w1_therm_read_bin(struct kobject *, char *, loff_t, size_t); |
| |
| static struct w1_family_ops w1_therm_fops = { |
| .rname = &w1_therm_read_name, |
| .rbin = &w1_therm_read_bin, |
| .rval = &w1_therm_read_temp, |
| .rvalname = "temp1_input", |
| }; |
| |
| static ssize_t w1_therm_read_name(struct device *dev, char *buf) |
| { |
| struct w1_slave *sl = container_of(dev, struct w1_slave, dev); |
| |
| return sprintf(buf, "%s\n", sl->name); |
| } |
| |
| static inline int w1_convert_temp(u8 rom[9]) |
| { |
| int t, h; |
| |
| if (rom[1] == 0) |
| t = ((s32)rom[0] >> 1)*1000; |
| else |
| t = 1000*(-1*(s32)(0x100-rom[0]) >> 1); |
| |
| t -= 250; |
| h = 1000*((s32)rom[7] - (s32)rom[6]); |
| h /= (s32)rom[7]; |
| t += h; |
| |
| return t; |
| } |
| |
| static ssize_t w1_therm_read_temp(struct device *dev, char *buf) |
| { |
| struct w1_slave *sl = container_of(dev, struct w1_slave, dev); |
| |
| return sprintf(buf, "%d\n", w1_convert_temp(sl->rom)); |
| } |
| |
| static int w1_therm_check_rom(u8 rom[9]) |
| { |
| int i; |
| |
| for (i=0; i<sizeof(bad_roms)/9; ++i) |
| if (!memcmp(bad_roms[i], rom, 9)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static ssize_t w1_therm_read_bin(struct kobject *kobj, char *buf, loff_t off, size_t count) |
| { |
| struct w1_slave *sl = container_of(container_of(kobj, struct device, kobj), |
| struct w1_slave, dev); |
| struct w1_master *dev = sl->master; |
| u8 rom[9], crc, verdict; |
| int i, max_trying = 10; |
| |
| atomic_inc(&sl->refcnt); |
| smp_mb__after_atomic_inc(); |
| if (down_interruptible(&sl->master->mutex)) { |
| count = 0; |
| goto out_dec; |
| } |
| |
| if (off > W1_SLAVE_DATA_SIZE) { |
| count = 0; |
| goto out; |
| } |
| if (off + count > W1_SLAVE_DATA_SIZE) { |
| count = 0; |
| goto out; |
| } |
| |
| memset(buf, 0, count); |
| memset(rom, 0, sizeof(rom)); |
| |
| count = 0; |
| verdict = 0; |
| crc = 0; |
| |
| while (max_trying--) { |
| if (!w1_reset_bus (dev)) { |
| int count = 0; |
| u8 match[9] = {W1_MATCH_ROM, }; |
| unsigned int tm = 750; |
| |
| memcpy(&match[1], (u64 *) & sl->reg_num, 8); |
| |
| w1_write_block(dev, match, 9); |
| |
| w1_write_8(dev, W1_CONVERT_TEMP); |
| |
| while (tm) { |
| tm = msleep_interruptible(tm); |
| if (signal_pending(current)) |
| flush_signals(current); |
| } |
| |
| if (!w1_reset_bus (dev)) { |
| w1_write_block(dev, match, 9); |
| |
| w1_write_8(dev, W1_READ_SCRATCHPAD); |
| if ((count = w1_read_block(dev, rom, 9)) != 9) { |
| dev_warn(&dev->dev, "w1_read_block() returned %d instead of 9.\n", count); |
| } |
| |
| crc = w1_calc_crc8(rom, 8); |
| |
| if (rom[8] == crc && rom[0]) |
| verdict = 1; |
| |
| } |
| } |
| |
| if (!w1_therm_check_rom(rom)) |
| break; |
| } |
| |
| for (i = 0; i < 9; ++i) |
| count += sprintf(buf + count, "%02x ", rom[i]); |
| count += sprintf(buf + count, ": crc=%02x %s\n", |
| crc, (verdict) ? "YES" : "NO"); |
| if (verdict) |
| memcpy(sl->rom, rom, sizeof(sl->rom)); |
| else |
| dev_warn(&dev->dev, "18S20 doesn't respond to CONVERT_TEMP.\n"); |
| |
| for (i = 0; i < 9; ++i) |
| count += sprintf(buf + count, "%02x ", sl->rom[i]); |
| |
| count += sprintf(buf + count, "t=%d\n", w1_convert_temp(rom)); |
| out: |
| up(&dev->mutex); |
| out_dec: |
| smp_mb__before_atomic_inc(); |
| atomic_dec(&sl->refcnt); |
| |
| return count; |
| } |
| |
| static struct w1_family w1_therm_family = { |
| .fid = W1_FAMILY_THERM, |
| .fops = &w1_therm_fops, |
| }; |
| |
| static int __init w1_therm_init(void) |
| { |
| return w1_register_family(&w1_therm_family); |
| } |
| |
| static void __exit w1_therm_fini(void) |
| { |
| w1_unregister_family(&w1_therm_family); |
| } |
| |
| module_init(w1_therm_init); |
| module_exit(w1_therm_fini); |