| /* |
| * Simple driver for Texas Instruments LM355x LED Flash driver chip |
| * Copyright (C) 2012 Texas Instruments |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/gpio.h> |
| #include <linux/leds.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/fs.h> |
| #include <linux/regmap.h> |
| #include <linux/platform_data/leds-lm355x.h> |
| |
| enum lm355x_type { |
| CHIP_LM3554 = 0, |
| CHIP_LM3556, |
| }; |
| |
| enum lm355x_regs { |
| REG_FLAG = 0, |
| REG_TORCH_CFG, |
| REG_TORCH_CTRL, |
| REG_STROBE_CFG, |
| REG_FLASH_CTRL, |
| REG_INDI_CFG, |
| REG_INDI_CTRL, |
| REG_OPMODE, |
| REG_MAX, |
| }; |
| |
| /* operation mode */ |
| enum lm355x_mode { |
| MODE_SHDN = 0, |
| MODE_INDIC, |
| MODE_TORCH, |
| MODE_FLASH |
| }; |
| |
| /* register map info. */ |
| struct lm355x_reg_data { |
| u8 regno; |
| u8 mask; |
| u8 shift; |
| }; |
| |
| struct lm355x_chip_data { |
| struct device *dev; |
| enum lm355x_type type; |
| |
| struct led_classdev cdev_flash; |
| struct led_classdev cdev_torch; |
| struct led_classdev cdev_indicator; |
| |
| struct lm355x_platform_data *pdata; |
| struct regmap *regmap; |
| struct mutex lock; |
| |
| unsigned int last_flag; |
| struct lm355x_reg_data *regs; |
| }; |
| |
| /* specific indicator function for lm3556 */ |
| enum lm3556_indic_pulse_time { |
| PULSE_TIME_0_MS = 0, |
| PULSE_TIME_32_MS, |
| PULSE_TIME_64_MS, |
| PULSE_TIME_92_MS, |
| PULSE_TIME_128_MS, |
| PULSE_TIME_160_MS, |
| PULSE_TIME_196_MS, |
| PULSE_TIME_224_MS, |
| PULSE_TIME_256_MS, |
| PULSE_TIME_288_MS, |
| PULSE_TIME_320_MS, |
| PULSE_TIME_352_MS, |
| PULSE_TIME_384_MS, |
| PULSE_TIME_416_MS, |
| PULSE_TIME_448_MS, |
| PULSE_TIME_480_MS, |
| }; |
| |
| enum lm3556_indic_n_blank { |
| INDIC_N_BLANK_0 = 0, |
| INDIC_N_BLANK_1, |
| INDIC_N_BLANK_2, |
| INDIC_N_BLANK_3, |
| INDIC_N_BLANK_4, |
| INDIC_N_BLANK_5, |
| INDIC_N_BLANK_6, |
| INDIC_N_BLANK_7, |
| INDIC_N_BLANK_8, |
| INDIC_N_BLANK_9, |
| INDIC_N_BLANK_10, |
| INDIC_N_BLANK_11, |
| INDIC_N_BLANK_12, |
| INDIC_N_BLANK_13, |
| INDIC_N_BLANK_14, |
| INDIC_N_BLANK_15, |
| }; |
| |
| enum lm3556_indic_period { |
| INDIC_PERIOD_0 = 0, |
| INDIC_PERIOD_1, |
| INDIC_PERIOD_2, |
| INDIC_PERIOD_3, |
| INDIC_PERIOD_4, |
| INDIC_PERIOD_5, |
| INDIC_PERIOD_6, |
| INDIC_PERIOD_7, |
| }; |
| |
| #define INDIC_PATTERN_SIZE 4 |
| |
| struct indicator { |
| u8 blinking; |
| u8 period_cnt; |
| }; |
| |
| /* indicator pattern data only for lm3556 */ |
| static struct indicator indicator_pattern[INDIC_PATTERN_SIZE] = { |
| [0] = {(INDIC_N_BLANK_1 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_1}, |
| [1] = {(INDIC_N_BLANK_15 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_2}, |
| [2] = {(INDIC_N_BLANK_10 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_4}, |
| [3] = {(INDIC_N_BLANK_5 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_7}, |
| }; |
| |
| static struct lm355x_reg_data lm3554_regs[REG_MAX] = { |
| [REG_FLAG] = {0xD0, 0xBF, 0}, |
| [REG_TORCH_CFG] = {0xE0, 0x80, 7}, |
| [REG_TORCH_CTRL] = {0xA0, 0x38, 3}, |
| [REG_STROBE_CFG] = {0xE0, 0x04, 2}, |
| [REG_FLASH_CTRL] = {0xB0, 0x78, 3}, |
| [REG_INDI_CFG] = {0xE0, 0x08, 3}, |
| [REG_INDI_CTRL] = {0xA0, 0xC0, 6}, |
| [REG_OPMODE] = {0xA0, 0x03, 0}, |
| }; |
| |
| static struct lm355x_reg_data lm3556_regs[REG_MAX] = { |
| [REG_FLAG] = {0x0B, 0xFF, 0}, |
| [REG_TORCH_CFG] = {0x0A, 0x10, 4}, |
| [REG_TORCH_CTRL] = {0x09, 0x70, 4}, |
| [REG_STROBE_CFG] = {0x0A, 0x20, 5}, |
| [REG_FLASH_CTRL] = {0x09, 0x0F, 0}, |
| [REG_INDI_CFG] = {0xFF, 0xFF, 0}, |
| [REG_INDI_CTRL] = {0x09, 0x70, 4}, |
| [REG_OPMODE] = {0x0A, 0x03, 0}, |
| }; |
| |
| static char lm355x_name[][I2C_NAME_SIZE] = { |
| [CHIP_LM3554] = LM3554_NAME, |
| [CHIP_LM3556] = LM3556_NAME, |
| }; |
| |
| /* chip initialize */ |
| static int lm355x_chip_init(struct lm355x_chip_data *chip) |
| { |
| int ret; |
| unsigned int reg_val; |
| struct lm355x_platform_data *pdata = chip->pdata; |
| |
| /* input and output pins configuration */ |
| switch (chip->type) { |
| case CHIP_LM3554: |
| reg_val = pdata->pin_tx2 | pdata->ntc_pin; |
| ret = regmap_update_bits(chip->regmap, 0xE0, 0x28, reg_val); |
| if (ret < 0) |
| goto out; |
| reg_val = pdata->pass_mode; |
| ret = regmap_update_bits(chip->regmap, 0xA0, 0x04, reg_val); |
| if (ret < 0) |
| goto out; |
| break; |
| |
| case CHIP_LM3556: |
| reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode; |
| ret = regmap_update_bits(chip->regmap, 0x0A, 0xC4, reg_val); |
| if (ret < 0) |
| goto out; |
| break; |
| default: |
| return -ENODATA; |
| } |
| |
| return ret; |
| out: |
| dev_err(chip->dev, "%s:i2c access fail to register\n", __func__); |
| return ret; |
| } |
| |
| /* chip control */ |
| static int lm355x_control(struct lm355x_chip_data *chip, |
| u8 brightness, enum lm355x_mode opmode) |
| { |
| int ret; |
| unsigned int reg_val; |
| struct lm355x_platform_data *pdata = chip->pdata; |
| struct lm355x_reg_data *preg = chip->regs; |
| |
| ret = regmap_read(chip->regmap, preg[REG_FLAG].regno, &chip->last_flag); |
| if (ret < 0) |
| goto out; |
| if (chip->last_flag & preg[REG_FLAG].mask) |
| dev_info(chip->dev, "%s Last FLAG is 0x%x\n", |
| lm355x_name[chip->type], |
| chip->last_flag & preg[REG_FLAG].mask); |
| /* brightness 0 means shutdown */ |
| if (!brightness) |
| opmode = MODE_SHDN; |
| |
| switch (opmode) { |
| case MODE_TORCH: |
| ret = |
| regmap_update_bits(chip->regmap, preg[REG_TORCH_CTRL].regno, |
| preg[REG_TORCH_CTRL].mask, |
| (brightness - 1) |
| << preg[REG_TORCH_CTRL].shift); |
| if (ret < 0) |
| goto out; |
| |
| if (pdata->pin_tx1 != LM355x_PIN_TORCH_DISABLE) { |
| ret = |
| regmap_update_bits(chip->regmap, |
| preg[REG_TORCH_CFG].regno, |
| preg[REG_TORCH_CFG].mask, |
| 0x01 << |
| preg[REG_TORCH_CFG].shift); |
| if (ret < 0) |
| goto out; |
| opmode = MODE_SHDN; |
| dev_info(chip->dev, |
| "torch brt is set - ext. torch pin mode\n"); |
| } |
| break; |
| |
| case MODE_FLASH: |
| |
| ret = |
| regmap_update_bits(chip->regmap, preg[REG_FLASH_CTRL].regno, |
| preg[REG_FLASH_CTRL].mask, |
| (brightness - 1) |
| << preg[REG_FLASH_CTRL].shift); |
| if (ret < 0) |
| goto out; |
| |
| if (pdata->pin_strobe != LM355x_PIN_STROBE_DISABLE) { |
| if (chip->type == CHIP_LM3554) |
| reg_val = 0x00; |
| else |
| reg_val = 0x01; |
| ret = |
| regmap_update_bits(chip->regmap, |
| preg[REG_STROBE_CFG].regno, |
| preg[REG_STROBE_CFG].mask, |
| reg_val << |
| preg[REG_STROBE_CFG].shift); |
| if (ret < 0) |
| goto out; |
| opmode = MODE_SHDN; |
| dev_info(chip->dev, |
| "flash brt is set - ext. strobe pin mode\n"); |
| } |
| break; |
| |
| case MODE_INDIC: |
| ret = |
| regmap_update_bits(chip->regmap, preg[REG_INDI_CTRL].regno, |
| preg[REG_INDI_CTRL].mask, |
| (brightness - 1) |
| << preg[REG_INDI_CTRL].shift); |
| if (ret < 0) |
| goto out; |
| |
| if (pdata->pin_tx2 != LM355x_PIN_TX_DISABLE) { |
| ret = |
| regmap_update_bits(chip->regmap, |
| preg[REG_INDI_CFG].regno, |
| preg[REG_INDI_CFG].mask, |
| 0x01 << |
| preg[REG_INDI_CFG].shift); |
| if (ret < 0) |
| goto out; |
| opmode = MODE_SHDN; |
| } |
| break; |
| case MODE_SHDN: |
| break; |
| default: |
| return -EINVAL; |
| } |
| /* operation mode control */ |
| ret = regmap_update_bits(chip->regmap, preg[REG_OPMODE].regno, |
| preg[REG_OPMODE].mask, |
| opmode << preg[REG_OPMODE].shift); |
| if (ret < 0) |
| goto out; |
| return ret; |
| out: |
| dev_err(chip->dev, "%s:i2c access fail to register\n", __func__); |
| return ret; |
| } |
| |
| /* torch */ |
| |
| static int lm355x_torch_brightness_set(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct lm355x_chip_data *chip = |
| container_of(cdev, struct lm355x_chip_data, cdev_torch); |
| int ret; |
| |
| mutex_lock(&chip->lock); |
| ret = lm355x_control(chip, brightness, MODE_TORCH); |
| mutex_unlock(&chip->lock); |
| return ret; |
| } |
| |
| /* flash */ |
| |
| static int lm355x_strobe_brightness_set(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct lm355x_chip_data *chip = |
| container_of(cdev, struct lm355x_chip_data, cdev_flash); |
| int ret; |
| |
| mutex_lock(&chip->lock); |
| ret = lm355x_control(chip, brightness, MODE_FLASH); |
| mutex_unlock(&chip->lock); |
| return ret; |
| } |
| |
| /* indicator */ |
| |
| static int lm355x_indicator_brightness_set(struct led_classdev *cdev, |
| enum led_brightness brightness) |
| { |
| struct lm355x_chip_data *chip = |
| container_of(cdev, struct lm355x_chip_data, cdev_indicator); |
| int ret; |
| |
| mutex_lock(&chip->lock); |
| ret = lm355x_control(chip, brightness, MODE_INDIC); |
| mutex_unlock(&chip->lock); |
| return ret; |
| } |
| |
| /* indicator pattern only for lm3556*/ |
| static ssize_t lm3556_indicator_pattern_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| ssize_t ret; |
| struct led_classdev *led_cdev = dev_get_drvdata(dev); |
| struct lm355x_chip_data *chip = |
| container_of(led_cdev, struct lm355x_chip_data, cdev_indicator); |
| unsigned int state; |
| |
| ret = kstrtouint(buf, 10, &state); |
| if (ret) |
| goto out; |
| if (state > INDIC_PATTERN_SIZE - 1) |
| state = INDIC_PATTERN_SIZE - 1; |
| |
| ret = regmap_write(chip->regmap, 0x04, |
| indicator_pattern[state].blinking); |
| if (ret < 0) |
| goto out; |
| |
| ret = regmap_write(chip->regmap, 0x05, |
| indicator_pattern[state].period_cnt); |
| if (ret < 0) |
| goto out; |
| |
| return size; |
| out: |
| dev_err(chip->dev, "%s:i2c access fail to register\n", __func__); |
| return ret; |
| } |
| |
| static DEVICE_ATTR(pattern, S_IWUSR, NULL, lm3556_indicator_pattern_store); |
| |
| static struct attribute *lm355x_indicator_attrs[] = { |
| &dev_attr_pattern.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(lm355x_indicator); |
| |
| static const struct regmap_config lm355x_regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0xFF, |
| }; |
| |
| /* module initialize */ |
| static int lm355x_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct lm355x_platform_data *pdata = dev_get_platdata(&client->dev); |
| struct lm355x_chip_data *chip; |
| |
| int err; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| dev_err(&client->dev, "i2c functionality check fail.\n"); |
| return -EOPNOTSUPP; |
| } |
| |
| if (pdata == NULL) { |
| dev_err(&client->dev, "needs Platform Data.\n"); |
| return -ENODATA; |
| } |
| |
| chip = devm_kzalloc(&client->dev, |
| sizeof(struct lm355x_chip_data), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->dev = &client->dev; |
| chip->type = id->driver_data; |
| switch (id->driver_data) { |
| case CHIP_LM3554: |
| chip->regs = lm3554_regs; |
| break; |
| case CHIP_LM3556: |
| chip->regs = lm3556_regs; |
| break; |
| default: |
| return -ENOSYS; |
| } |
| chip->pdata = pdata; |
| |
| chip->regmap = devm_regmap_init_i2c(client, &lm355x_regmap); |
| if (IS_ERR(chip->regmap)) { |
| err = PTR_ERR(chip->regmap); |
| dev_err(&client->dev, |
| "Failed to allocate register map: %d\n", err); |
| return err; |
| } |
| |
| mutex_init(&chip->lock); |
| i2c_set_clientdata(client, chip); |
| |
| err = lm355x_chip_init(chip); |
| if (err < 0) |
| goto err_out; |
| |
| /* flash */ |
| chip->cdev_flash.name = "flash"; |
| chip->cdev_flash.max_brightness = 16; |
| chip->cdev_flash.brightness_set_blocking = lm355x_strobe_brightness_set; |
| chip->cdev_flash.default_trigger = "flash"; |
| err = led_classdev_register((struct device *) |
| &client->dev, &chip->cdev_flash); |
| if (err < 0) |
| goto err_out; |
| /* torch */ |
| chip->cdev_torch.name = "torch"; |
| chip->cdev_torch.max_brightness = 8; |
| chip->cdev_torch.brightness_set_blocking = lm355x_torch_brightness_set; |
| chip->cdev_torch.default_trigger = "torch"; |
| err = led_classdev_register((struct device *) |
| &client->dev, &chip->cdev_torch); |
| if (err < 0) |
| goto err_create_torch_file; |
| /* indicator */ |
| chip->cdev_indicator.name = "indicator"; |
| if (id->driver_data == CHIP_LM3554) |
| chip->cdev_indicator.max_brightness = 4; |
| else |
| chip->cdev_indicator.max_brightness = 8; |
| chip->cdev_indicator.brightness_set_blocking = |
| lm355x_indicator_brightness_set; |
| /* indicator pattern control only for LM3556 */ |
| if (id->driver_data == CHIP_LM3556) |
| chip->cdev_indicator.groups = lm355x_indicator_groups; |
| err = led_classdev_register((struct device *) |
| &client->dev, &chip->cdev_indicator); |
| if (err < 0) |
| goto err_create_indicator_file; |
| |
| dev_info(&client->dev, "%s is initialized\n", |
| lm355x_name[id->driver_data]); |
| return 0; |
| |
| err_create_indicator_file: |
| led_classdev_unregister(&chip->cdev_torch); |
| err_create_torch_file: |
| led_classdev_unregister(&chip->cdev_flash); |
| err_out: |
| return err; |
| } |
| |
| static int lm355x_remove(struct i2c_client *client) |
| { |
| struct lm355x_chip_data *chip = i2c_get_clientdata(client); |
| struct lm355x_reg_data *preg = chip->regs; |
| |
| regmap_write(chip->regmap, preg[REG_OPMODE].regno, 0); |
| led_classdev_unregister(&chip->cdev_indicator); |
| led_classdev_unregister(&chip->cdev_torch); |
| led_classdev_unregister(&chip->cdev_flash); |
| dev_info(&client->dev, "%s is removed\n", lm355x_name[chip->type]); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id lm355x_id[] = { |
| {LM3554_NAME, CHIP_LM3554}, |
| {LM3556_NAME, CHIP_LM3556}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, lm355x_id); |
| |
| static struct i2c_driver lm355x_i2c_driver = { |
| .driver = { |
| .name = LM355x_NAME, |
| .pm = NULL, |
| }, |
| .probe = lm355x_probe, |
| .remove = lm355x_remove, |
| .id_table = lm355x_id, |
| }; |
| |
| module_i2c_driver(lm355x_i2c_driver); |
| |
| MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM355x"); |
| MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>"); |
| MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>"); |
| MODULE_LICENSE("GPL v2"); |