| /* |
| * GPIO driver for the SMSC SCH311x Super-I/O chips |
| * |
| * Copyright (C) 2013 Bruno Randolf <br1@einfach.org> |
| * |
| * SuperIO functions and chip detection: |
| * (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| |
| #define DRV_NAME "gpio-sch311x" |
| |
| #define SCH311X_GPIO_CONF_OUT 0x00 |
| #define SCH311X_GPIO_CONF_IN 0x01 |
| #define SCH311X_GPIO_CONF_INVERT 0x02 |
| #define SCH311X_GPIO_CONF_OPEN_DRAIN 0x80 |
| |
| #define SIO_CONFIG_KEY_ENTER 0x55 |
| #define SIO_CONFIG_KEY_EXIT 0xaa |
| |
| #define GP1 0x4b |
| |
| static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e }; |
| |
| static struct platform_device *sch311x_gpio_pdev; |
| |
| struct sch311x_pdev_data { /* platform device data */ |
| unsigned short runtime_reg; /* runtime register base address */ |
| }; |
| |
| struct sch311x_gpio_block { /* one GPIO block runtime data */ |
| struct gpio_chip chip; |
| unsigned short data_reg; /* from definition below */ |
| unsigned short *config_regs; /* pointer to definition below */ |
| unsigned short runtime_reg; /* runtime register */ |
| spinlock_t lock; /* lock for this GPIO block */ |
| }; |
| |
| struct sch311x_gpio_priv { /* driver private data */ |
| struct sch311x_gpio_block blocks[6]; |
| }; |
| |
| struct sch311x_gpio_block_def { /* register address definitions */ |
| unsigned short data_reg; |
| unsigned short config_regs[8]; |
| unsigned short base; |
| }; |
| |
| /* Note: some GPIOs are not available, these are marked with 0x00 */ |
| |
| static struct sch311x_gpio_block_def sch311x_gpio_blocks[] = { |
| { |
| .data_reg = 0x4b, /* GP1 */ |
| .config_regs = {0x23, 0x24, 0x25, 0x26, 0x27, 0x29, 0x2a, 0x2b}, |
| .base = 10, |
| }, |
| { |
| .data_reg = 0x4c, /* GP2 */ |
| .config_regs = {0x00, 0x2c, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x32}, |
| .base = 20, |
| }, |
| { |
| .data_reg = 0x4d, /* GP3 */ |
| .config_regs = {0x33, 0x34, 0x35, 0x36, 0x37, 0x00, 0x39, 0x3a}, |
| .base = 30, |
| }, |
| { |
| .data_reg = 0x4e, /* GP4 */ |
| .config_regs = {0x3b, 0x00, 0x3d, 0x00, 0x6e, 0x6f, 0x72, 0x73}, |
| .base = 40, |
| }, |
| { |
| .data_reg = 0x4f, /* GP5 */ |
| .config_regs = {0x3f, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46}, |
| .base = 50, |
| }, |
| { |
| .data_reg = 0x50, /* GP6 */ |
| .config_regs = {0x47, 0x48, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59}, |
| .base = 60, |
| }, |
| }; |
| |
| static inline struct sch311x_gpio_block * |
| to_sch311x_gpio_block(struct gpio_chip *chip) |
| { |
| return container_of(chip, struct sch311x_gpio_block, chip); |
| } |
| |
| |
| /* |
| * Super-IO functions |
| */ |
| |
| static inline int sch311x_sio_enter(int sio_config_port) |
| { |
| /* Don't step on other drivers' I/O space by accident. */ |
| if (!request_muxed_region(sio_config_port, 2, DRV_NAME)) { |
| pr_err(DRV_NAME "I/O address 0x%04x already in use\n", |
| sio_config_port); |
| return -EBUSY; |
| } |
| |
| outb(SIO_CONFIG_KEY_ENTER, sio_config_port); |
| return 0; |
| } |
| |
| static inline void sch311x_sio_exit(int sio_config_port) |
| { |
| outb(SIO_CONFIG_KEY_EXIT, sio_config_port); |
| release_region(sio_config_port, 2); |
| } |
| |
| static inline int sch311x_sio_inb(int sio_config_port, int reg) |
| { |
| outb(reg, sio_config_port); |
| return inb(sio_config_port + 1); |
| } |
| |
| static inline void sch311x_sio_outb(int sio_config_port, int reg, int val) |
| { |
| outb(reg, sio_config_port); |
| outb(val, sio_config_port + 1); |
| } |
| |
| |
| /* |
| * GPIO functions |
| */ |
| |
| static int sch311x_gpio_request(struct gpio_chip *chip, unsigned offset) |
| { |
| struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); |
| |
| if (block->config_regs[offset] == 0) /* GPIO is not available */ |
| return -ENODEV; |
| |
| if (!request_region(block->runtime_reg + block->config_regs[offset], |
| 1, DRV_NAME)) { |
| dev_err(chip->dev, "Failed to request region 0x%04x.\n", |
| block->runtime_reg + block->config_regs[offset]); |
| return -EBUSY; |
| } |
| return 0; |
| } |
| |
| static void sch311x_gpio_free(struct gpio_chip *chip, unsigned offset) |
| { |
| struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); |
| |
| if (block->config_regs[offset] == 0) /* GPIO is not available */ |
| return; |
| |
| release_region(block->runtime_reg + block->config_regs[offset], 1); |
| } |
| |
| static int sch311x_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); |
| unsigned char data; |
| |
| spin_lock(&block->lock); |
| data = inb(block->runtime_reg + block->data_reg); |
| spin_unlock(&block->lock); |
| |
| return !!(data & BIT(offset)); |
| } |
| |
| static void __sch311x_gpio_set(struct sch311x_gpio_block *block, |
| unsigned offset, int value) |
| { |
| unsigned char data = inb(block->runtime_reg + block->data_reg); |
| if (value) |
| data |= BIT(offset); |
| else |
| data &= ~BIT(offset); |
| outb(data, block->runtime_reg + block->data_reg); |
| } |
| |
| static void sch311x_gpio_set(struct gpio_chip *chip, unsigned offset, |
| int value) |
| { |
| struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); |
| |
| spin_lock(&block->lock); |
| __sch311x_gpio_set(block, offset, value); |
| spin_unlock(&block->lock); |
| } |
| |
| static int sch311x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) |
| { |
| struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); |
| |
| spin_lock(&block->lock); |
| outb(SCH311X_GPIO_CONF_IN, block->runtime_reg + |
| block->config_regs[offset]); |
| spin_unlock(&block->lock); |
| |
| return 0; |
| } |
| |
| static int sch311x_gpio_direction_out(struct gpio_chip *chip, unsigned offset, |
| int value) |
| { |
| struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); |
| |
| spin_lock(&block->lock); |
| |
| outb(SCH311X_GPIO_CONF_OUT, block->runtime_reg + |
| block->config_regs[offset]); |
| |
| __sch311x_gpio_set(block, offset, value); |
| |
| spin_unlock(&block->lock); |
| return 0; |
| } |
| |
| static int sch311x_gpio_probe(struct platform_device *pdev) |
| { |
| struct sch311x_pdev_data *pdata = pdev->dev.platform_data; |
| struct sch311x_gpio_priv *priv; |
| struct sch311x_gpio_block *block; |
| int err, i; |
| |
| /* we can register all GPIO data registers at once */ |
| if (!request_region(pdata->runtime_reg + GP1, 6, DRV_NAME)) { |
| dev_err(&pdev->dev, "Failed to request region 0x%04x-0x%04x.\n", |
| pdata->runtime_reg + GP1, pdata->runtime_reg + GP1 + 5); |
| return -EBUSY; |
| } |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, priv); |
| |
| for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) { |
| block = &priv->blocks[i]; |
| |
| spin_lock_init(&block->lock); |
| |
| block->chip.label = DRV_NAME; |
| block->chip.owner = THIS_MODULE; |
| block->chip.request = sch311x_gpio_request; |
| block->chip.free = sch311x_gpio_free; |
| block->chip.direction_input = sch311x_gpio_direction_in; |
| block->chip.direction_output = sch311x_gpio_direction_out; |
| block->chip.get = sch311x_gpio_get; |
| block->chip.set = sch311x_gpio_set; |
| block->chip.ngpio = 8; |
| block->chip.dev = &pdev->dev; |
| block->chip.base = sch311x_gpio_blocks[i].base; |
| block->config_regs = sch311x_gpio_blocks[i].config_regs; |
| block->data_reg = sch311x_gpio_blocks[i].data_reg; |
| block->runtime_reg = pdata->runtime_reg; |
| |
| err = gpiochip_add(&block->chip); |
| if (err < 0) { |
| dev_err(&pdev->dev, |
| "Could not register gpiochip, %d\n", err); |
| goto exit_err; |
| } |
| dev_info(&pdev->dev, |
| "SMSC SCH311x GPIO block %d registered.\n", i); |
| } |
| |
| return 0; |
| |
| exit_err: |
| release_region(pdata->runtime_reg + GP1, 6); |
| /* release already registered chips */ |
| for (--i; i >= 0; i--) |
| gpiochip_remove(&priv->blocks[i].chip); |
| return err; |
| } |
| |
| static int sch311x_gpio_remove(struct platform_device *pdev) |
| { |
| struct sch311x_pdev_data *pdata = pdev->dev.platform_data; |
| struct sch311x_gpio_priv *priv = platform_get_drvdata(pdev); |
| int i; |
| |
| release_region(pdata->runtime_reg + GP1, 6); |
| |
| for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) { |
| gpiochip_remove(&priv->blocks[i].chip); |
| dev_info(&pdev->dev, |
| "SMSC SCH311x GPIO block %d unregistered.\n", i); |
| } |
| return 0; |
| } |
| |
| static struct platform_driver sch311x_gpio_driver = { |
| .driver.name = DRV_NAME, |
| .driver.owner = THIS_MODULE, |
| .probe = sch311x_gpio_probe, |
| .remove = sch311x_gpio_remove, |
| }; |
| |
| |
| /* |
| * Init & exit routines |
| */ |
| |
| static int __init sch311x_detect(int sio_config_port, unsigned short *addr) |
| { |
| int err = 0, reg; |
| unsigned short base_addr; |
| unsigned char dev_id; |
| |
| err = sch311x_sio_enter(sio_config_port); |
| if (err) |
| return err; |
| |
| /* Check device ID. */ |
| reg = sch311x_sio_inb(sio_config_port, 0x20); |
| switch (reg) { |
| case 0x7c: /* SCH3112 */ |
| dev_id = 2; |
| break; |
| case 0x7d: /* SCH3114 */ |
| dev_id = 4; |
| break; |
| case 0x7f: /* SCH3116 */ |
| dev_id = 6; |
| break; |
| default: |
| err = -ENODEV; |
| goto exit; |
| } |
| |
| /* Select logical device A (runtime registers) */ |
| sch311x_sio_outb(sio_config_port, 0x07, 0x0a); |
| |
| /* Check if Logical Device Register is currently active */ |
| if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0) |
| pr_info("Seems that LDN 0x0a is not active...\n"); |
| |
| /* Get the base address of the runtime registers */ |
| base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) | |
| sch311x_sio_inb(sio_config_port, 0x61); |
| if (!base_addr) { |
| pr_err("Base address not set\n"); |
| err = -ENODEV; |
| goto exit; |
| } |
| *addr = base_addr; |
| |
| pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr); |
| |
| exit: |
| sch311x_sio_exit(sio_config_port); |
| return err; |
| } |
| |
| static int __init sch311x_gpio_pdev_add(const unsigned short addr) |
| { |
| struct sch311x_pdev_data pdata; |
| int err; |
| |
| pdata.runtime_reg = addr; |
| |
| sch311x_gpio_pdev = platform_device_alloc(DRV_NAME, -1); |
| if (!sch311x_gpio_pdev) |
| return -ENOMEM; |
| |
| err = platform_device_add_data(sch311x_gpio_pdev, |
| &pdata, sizeof(pdata)); |
| if (err) { |
| pr_err(DRV_NAME "Platform data allocation failed\n"); |
| goto err; |
| } |
| |
| err = platform_device_add(sch311x_gpio_pdev); |
| if (err) { |
| pr_err(DRV_NAME "Device addition failed\n"); |
| goto err; |
| } |
| return 0; |
| |
| err: |
| platform_device_put(sch311x_gpio_pdev); |
| return err; |
| } |
| |
| static int __init sch311x_gpio_init(void) |
| { |
| int err, i; |
| unsigned short addr = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(sch311x_ioports); i++) |
| if (sch311x_detect(sch311x_ioports[i], &addr) == 0) |
| break; |
| |
| if (!addr) |
| return -ENODEV; |
| |
| err = platform_driver_register(&sch311x_gpio_driver); |
| if (err) |
| return err; |
| |
| err = sch311x_gpio_pdev_add(addr); |
| if (err) |
| goto unreg_platform_driver; |
| |
| return 0; |
| |
| unreg_platform_driver: |
| platform_driver_unregister(&sch311x_gpio_driver); |
| return err; |
| } |
| |
| static void __exit sch311x_gpio_exit(void) |
| { |
| platform_device_unregister(sch311x_gpio_pdev); |
| platform_driver_unregister(&sch311x_gpio_driver); |
| } |
| |
| module_init(sch311x_gpio_init); |
| module_exit(sch311x_gpio_exit); |
| |
| MODULE_AUTHOR("Bruno Randolf <br1@einfach.org>"); |
| MODULE_DESCRIPTION("SMSC SCH311x GPIO Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:gpio-sch311x"); |