drivers/acpi/resources/rsmemory.c - kernel/msm-4.9 - Gitiles

 /*******************************************************************************
  *
  * Module Name: rsmem24 - Memory resource descriptors
  *
  ******************************************************************************/

 /*
  * Copyright (C) 2000 - 2005, R. Byron Moore
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions, and the following disclaimer,
  *    without modification.
  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  *    substantially similar to the "NO WARRANTY" disclaimer below
  *    ("Disclaimer") and any redistribution must be conditioned upon
  *    including a substantially similar Disclaimer requirement for further
  *    binary redistribution.
  * 3. Neither the names of the above-listed copyright holders nor the names
  *    of any contributors may be used to endorse or promote products derived
  *    from this software without specific prior written permission.
  *
  * Alternatively, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") version 2 as published by the Free
  * Software Foundation.
  *
  * NO WARRANTY
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGES.
  */

 #include <acpi/acpi.h>
 #include <acpi/acresrc.h>

 #define _COMPONENT          ACPI_RESOURCES
 ACPI_MODULE_NAME("rsmemory")

 /*******************************************************************************
  *
  * FUNCTION:    acpi_rs_memory24_resource
  *
  * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
  *                                        stream
  *              bytes_consumed          - Pointer to where the number of bytes
  *                                        consumed the byte_stream_buffer is
  *                                        returned
  *              output_buffer           - Pointer to the return data buffer
  *              structure_size          - Pointer to where the number of bytes
  *                                        in the return data struct is returned
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Take the resource byte stream and fill out the appropriate
  *              structure pointed to by the output_buffer. Return the
  *              number of bytes consumed from the byte stream.
  *
  ******************************************************************************/
 acpi_status
 acpi_rs_memory24_resource(u8 * byte_stream_buffer,
 			  acpi_size * bytes_consumed,
 			  u8 ** output_buffer, acpi_size * structure_size)
 {
 	u8 *buffer = byte_stream_buffer;
 	struct acpi_resource *output_struct = (void *)*output_buffer;
 	u16 temp16 = 0;
 	u8 temp8 = 0;
 	acpi_size struct_size =
 	    ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem24);

 	ACPI_FUNCTION_TRACE("rs_memory24_resource");

 	/* Point past the Descriptor to get the number of bytes consumed */

 	buffer += 1;

 	ACPI_MOVE_16_TO_16(&temp16, buffer);
 	buffer += 2;
 	*bytes_consumed = (acpi_size) temp16 + 3;
 	output_struct->id = ACPI_RSTYPE_MEM24;

 	/* Check Byte 3 the Read/Write bit */

 	temp8 = *buffer;
 	buffer += 1;
 	output_struct->data.memory24.read_write_attribute = temp8 & 0x01;

 	/* Get min_base_address (Bytes 4-5) */

 	ACPI_MOVE_16_TO_16(&temp16, buffer);
 	buffer += 2;
 	output_struct->data.memory24.min_base_address = temp16;

 	/* Get max_base_address (Bytes 6-7) */

 	ACPI_MOVE_16_TO_16(&temp16, buffer);
 	buffer += 2;
 	output_struct->data.memory24.max_base_address = temp16;

 	/* Get Alignment (Bytes 8-9) */

 	ACPI_MOVE_16_TO_16(&temp16, buffer);
 	buffer += 2;
 	output_struct->data.memory24.alignment = temp16;

 	/* Get range_length (Bytes 10-11) */

 	ACPI_MOVE_16_TO_16(&temp16, buffer);
 	output_struct->data.memory24.range_length = temp16;

 	/* Set the Length parameter */

 	output_struct->length = (u32) struct_size;

 	/* Return the final size of the structure */

 	*structure_size = struct_size;
 	return_ACPI_STATUS(AE_OK);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_rs_memory24_stream
  *
  * PARAMETERS:  linked_list             - Pointer to the resource linked list
  *              output_buffer           - Pointer to the user's return buffer
  *              bytes_consumed          - Pointer to where the number of bytes
  *                                        used in the output_buffer is returned
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Take the linked list resource structure and fills in the
  *              the appropriate bytes in a byte stream
  *
  ******************************************************************************/

 acpi_status
 acpi_rs_memory24_stream(struct acpi_resource *linked_list,
 			u8 ** output_buffer, acpi_size * bytes_consumed)
 {
 	u8 *buffer = *output_buffer;
 	u16 temp16 = 0;
 	u8 temp8 = 0;

 	ACPI_FUNCTION_TRACE("rs_memory24_stream");

 	/* The descriptor field is static */

 	*buffer = 0x81;
 	buffer += 1;

 	/* The length field is static */

 	temp16 = 0x09;
 	ACPI_MOVE_16_TO_16(buffer, &temp16);
 	buffer += 2;

 	/* Set the Information Byte */

 	temp8 = (u8) (linked_list->data.memory24.read_write_attribute & 0x01);
 	*buffer = temp8;
 	buffer += 1;

 	/* Set the Range minimum base address */

 	ACPI_MOVE_32_TO_16(buffer,
 			   &linked_list->data.memory24.min_base_address);
 	buffer += 2;

 	/* Set the Range maximum base address */

 	ACPI_MOVE_32_TO_16(buffer,
 			   &linked_list->data.memory24.max_base_address);
 	buffer += 2;

 	/* Set the base alignment */

 	ACPI_MOVE_32_TO_16(buffer, &linked_list->data.memory24.alignment);
 	buffer += 2;

 	/* Set the range length */

 	ACPI_MOVE_32_TO_16(buffer, &linked_list->data.memory24.range_length);
 	buffer += 2;

 	/* Return the number of bytes consumed in this operation */

 	*bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
 	return_ACPI_STATUS(AE_OK);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_rs_memory32_range_resource
  *
  * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
  *                                        stream
  *              bytes_consumed          - Pointer to where the number of bytes
  *                                        consumed the byte_stream_buffer is
  *                                        returned
  *              output_buffer           - Pointer to the return data buffer
  *              structure_size          - Pointer to where the number of bytes
  *                                        in the return data struct is returned
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Take the resource byte stream and fill out the appropriate
  *              structure pointed to by the output_buffer. Return the
  *              number of bytes consumed from the byte stream.
  *
  ******************************************************************************/

 acpi_status
 acpi_rs_memory32_range_resource(u8 * byte_stream_buffer,
 				acpi_size * bytes_consumed,
 				u8 ** output_buffer, acpi_size * structure_size)
 {
 	u8 *buffer = byte_stream_buffer;
 	struct acpi_resource *output_struct = (void *)*output_buffer;
 	u16 temp16 = 0;
 	u8 temp8 = 0;
 	acpi_size struct_size =
 	    ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem32);

 	ACPI_FUNCTION_TRACE("rs_memory32_range_resource");

 	/* Point past the Descriptor to get the number of bytes consumed */

 	buffer += 1;

 	ACPI_MOVE_16_TO_16(&temp16, buffer);
 	buffer += 2;
 	*bytes_consumed = (acpi_size) temp16 + 3;

 	output_struct->id = ACPI_RSTYPE_MEM32;

 	/*
 	 *  Point to the place in the output buffer where the data portion will
 	 *  begin.
 	 *  1. Set the RESOURCE_DATA * Data to point to its own address, then
 	 *  2. Set the pointer to the next address.
 	 *
 	 *  NOTE: output_struct->Data is cast to u8, otherwise, this addition adds
 	 *  4 * sizeof(RESOURCE_DATA) instead of 4 * sizeof(u8)
 	 */

 	/* Check Byte 3 the Read/Write bit */

 	temp8 = *buffer;
 	buffer += 1;

 	output_struct->data.memory32.read_write_attribute = temp8 & 0x01;

 	/* Get min_base_address (Bytes 4-7) */

 	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.min_base_address,
 			   buffer);
 	buffer += 4;

 	/* Get max_base_address (Bytes 8-11) */

 	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.max_base_address,
 			   buffer);
 	buffer += 4;

 	/* Get Alignment (Bytes 12-15) */

 	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.alignment, buffer);
 	buffer += 4;

 	/* Get range_length (Bytes 16-19) */

 	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.range_length, buffer);

 	/* Set the Length parameter */

 	output_struct->length = (u32) struct_size;

 	/* Return the final size of the structure */

 	*structure_size = struct_size;
 	return_ACPI_STATUS(AE_OK);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_rs_fixed_memory32_resource
  *
  * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte
  *                                        stream
  *              bytes_consumed          - Pointer to where the number of bytes
  *                                        consumed the byte_stream_buffer is
  *                                        returned
  *              output_buffer           - Pointer to the return data buffer
  *              structure_size          - Pointer to where the number of bytes
  *                                        in the return data struct is returned
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Take the resource byte stream and fill out the appropriate
  *              structure pointed to by the output_buffer. Return the
  *              number of bytes consumed from the byte stream.
  *
  ******************************************************************************/

 acpi_status
 acpi_rs_fixed_memory32_resource(u8 * byte_stream_buffer,
 				acpi_size * bytes_consumed,
 				u8 ** output_buffer, acpi_size * structure_size)
 {
 	u8 *buffer = byte_stream_buffer;
 	struct acpi_resource *output_struct = (void *)*output_buffer;
 	u16 temp16 = 0;
 	u8 temp8 = 0;
 	acpi_size struct_size =
 	    ACPI_SIZEOF_RESOURCE(struct acpi_resource_fixed_mem32);

 	ACPI_FUNCTION_TRACE("rs_fixed_memory32_resource");

 	/* Point past the Descriptor to get the number of bytes consumed */

 	buffer += 1;
 	ACPI_MOVE_16_TO_16(&temp16, buffer);

 	buffer += 2;
 	*bytes_consumed = (acpi_size) temp16 + 3;

 	output_struct->id = ACPI_RSTYPE_FIXED_MEM32;

 	/* Check Byte 3 the Read/Write bit */

 	temp8 = *buffer;
 	buffer += 1;
 	output_struct->data.fixed_memory32.read_write_attribute = temp8 & 0x01;

 	/* Get range_base_address (Bytes 4-7) */

 	ACPI_MOVE_32_TO_32(&output_struct->data.fixed_memory32.
 			   range_base_address, buffer);
 	buffer += 4;

 	/* Get range_length (Bytes 8-11) */

 	ACPI_MOVE_32_TO_32(&output_struct->data.fixed_memory32.range_length,
 			   buffer);

 	/* Set the Length parameter */

 	output_struct->length = (u32) struct_size;

 	/* Return the final size of the structure */

 	*structure_size = struct_size;
 	return_ACPI_STATUS(AE_OK);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_rs_memory32_range_stream
  *
  * PARAMETERS:  linked_list             - Pointer to the resource linked list
  *              output_buffer           - Pointer to the user's return buffer
  *              bytes_consumed          - Pointer to where the number of bytes
  *                                        used in the output_buffer is returned
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Take the linked list resource structure and fills in the
  *              the appropriate bytes in a byte stream
  *
  ******************************************************************************/

 acpi_status
 acpi_rs_memory32_range_stream(struct acpi_resource *linked_list,
 			      u8 ** output_buffer, acpi_size * bytes_consumed)
 {
 	u8 *buffer = *output_buffer;
 	u16 temp16 = 0;
 	u8 temp8 = 0;

 	ACPI_FUNCTION_TRACE("rs_memory32_range_stream");

 	/* The descriptor field is static */

 	*buffer = 0x85;
 	buffer += 1;

 	/* The length field is static */

 	temp16 = 0x11;

 	ACPI_MOVE_16_TO_16(buffer, &temp16);
 	buffer += 2;

 	/* Set the Information Byte */

 	temp8 = (u8) (linked_list->data.memory32.read_write_attribute & 0x01);
 	*buffer = temp8;
 	buffer += 1;

 	/* Set the Range minimum base address */

 	ACPI_MOVE_32_TO_32(buffer,
 			   &linked_list->data.memory32.min_base_address);
 	buffer += 4;

 	/* Set the Range maximum base address */

 	ACPI_MOVE_32_TO_32(buffer,
 			   &linked_list->data.memory32.max_base_address);
 	buffer += 4;

 	/* Set the base alignment */

 	ACPI_MOVE_32_TO_32(buffer, &linked_list->data.memory32.alignment);
 	buffer += 4;

 	/* Set the range length */

 	ACPI_MOVE_32_TO_32(buffer, &linked_list->data.memory32.range_length);
 	buffer += 4;

 	/* Return the number of bytes consumed in this operation */

 	*bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
 	return_ACPI_STATUS(AE_OK);
 }

 /*******************************************************************************
  *
  * FUNCTION:    acpi_rs_fixed_memory32_stream
  *
  * PARAMETERS:  linked_list             - Pointer to the resource linked list
  *              output_buffer           - Pointer to the user's return buffer
  *              bytes_consumed          - Pointer to where the number of bytes
  *                                        used in the output_buffer is returned
  *
  * RETURN:      Status
  *
  * DESCRIPTION: Take the linked list resource structure and fills in the
  *              the appropriate bytes in a byte stream
  *
  ******************************************************************************/

 acpi_status
 acpi_rs_fixed_memory32_stream(struct acpi_resource *linked_list,
 			      u8 ** output_buffer, acpi_size * bytes_consumed)
 {
 	u8 *buffer = *output_buffer;
 	u16 temp16 = 0;
 	u8 temp8 = 0;

 	ACPI_FUNCTION_TRACE("rs_fixed_memory32_stream");

 	/* The descriptor field is static */

 	*buffer = 0x86;
 	buffer += 1;

 	/* The length field is static */

 	temp16 = 0x09;

 	ACPI_MOVE_16_TO_16(buffer, &temp16);
 	buffer += 2;

 	/* Set the Information Byte */

 	temp8 =
 	    (u8) (linked_list->data.fixed_memory32.read_write_attribute & 0x01);
 	*buffer = temp8;
 	buffer += 1;

 	/* Set the Range base address */

 	ACPI_MOVE_32_TO_32(buffer,
 			   &linked_list->data.fixed_memory32.
 			   range_base_address);
 	buffer += 4;

 	/* Set the range length */

 	ACPI_MOVE_32_TO_32(buffer,
 			   &linked_list->data.fixed_memory32.range_length);
 	buffer += 4;

 	/* Return the number of bytes consumed in this operation */

 	*bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer);
 	return_ACPI_STATUS(AE_OK);
 }
	/*******************************************************************************
	*
	* Module Name: rsmem24 - Memory resource descriptors
	*
	******************************************************************************/

	/*
	* Copyright (C) 2000 - 2005, R. Byron Moore
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions, and the following disclaimer,
	* without modification.
	* 2. Redistributions in binary form must reproduce at minimum a disclaimer
	* substantially similar to the "NO WARRANTY" disclaimer below
	* ("Disclaimer") and any redistribution must be conditioned upon
	* including a substantially similar Disclaimer requirement for further
	* binary redistribution.
	* 3. Neither the names of the above-listed copyright holders nor the names
	* of any contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* Alternatively, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") version 2 as published by the Free
	* Software Foundation.
	*
	* NO WARRANTY
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
	* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
	* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
	* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
	* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGES.
	*/

	#include <acpi/acpi.h>
	#include <acpi/acresrc.h>

	#define _COMPONENT ACPI_RESOURCES
	ACPI_MODULE_NAME("rsmemory")

	/*******************************************************************************
	*
	* FUNCTION: acpi_rs_memory24_resource
	*
	* PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
	* stream
	* bytes_consumed - Pointer to where the number of bytes
	* consumed the byte_stream_buffer is
	* returned
	* output_buffer - Pointer to the return data buffer
	* structure_size - Pointer to where the number of bytes
	* in the return data struct is returned
	*
	* RETURN: Status
	*
	* DESCRIPTION: Take the resource byte stream and fill out the appropriate
	* structure pointed to by the output_buffer. Return the
	* number of bytes consumed from the byte stream.
	*
	******************************************************************************/
	acpi_status
	acpi_rs_memory24_resource(u8 * byte_stream_buffer,
	acpi_size * bytes_consumed,
	u8 ** output_buffer, acpi_size * structure_size)
	{
	u8 *buffer = byte_stream_buffer;
	struct acpi_resource output_struct = (void )*output_buffer;
	u16 temp16 = 0;
	u8 temp8 = 0;
	acpi_size struct_size =
	ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem24);

	ACPI_FUNCTION_TRACE("rs_memory24_resource");

	/* Point past the Descriptor to get the number of bytes consumed */

	buffer += 1;

	ACPI_MOVE_16_TO_16(&temp16, buffer);
	buffer += 2;
	*bytes_consumed = (acpi_size) temp16 + 3;
	output_struct->id = ACPI_RSTYPE_MEM24;

	/* Check Byte 3 the Read/Write bit */

	temp8 = *buffer;
	buffer += 1;
	output_struct->data.memory24.read_write_attribute = temp8 & 0x01;

	/* Get min_base_address (Bytes 4-5) */

	ACPI_MOVE_16_TO_16(&temp16, buffer);
	buffer += 2;
	output_struct->data.memory24.min_base_address = temp16;

	/* Get max_base_address (Bytes 6-7) */

	ACPI_MOVE_16_TO_16(&temp16, buffer);
	buffer += 2;
	output_struct->data.memory24.max_base_address = temp16;

	/* Get Alignment (Bytes 8-9) */

	ACPI_MOVE_16_TO_16(&temp16, buffer);
	buffer += 2;
	output_struct->data.memory24.alignment = temp16;

	/* Get range_length (Bytes 10-11) */

	ACPI_MOVE_16_TO_16(&temp16, buffer);
	output_struct->data.memory24.range_length = temp16;

	/* Set the Length parameter */

	output_struct->length = (u32) struct_size;

	/* Return the final size of the structure */

	*structure_size = struct_size;
	return_ACPI_STATUS(AE_OK);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_rs_memory24_stream
	*
	* PARAMETERS: linked_list - Pointer to the resource linked list
	* output_buffer - Pointer to the user's return buffer
	* bytes_consumed - Pointer to where the number of bytes
	* used in the output_buffer is returned
	*
	* RETURN: Status
	*
	* DESCRIPTION: Take the linked list resource structure and fills in the
	* the appropriate bytes in a byte stream
	*
	******************************************************************************/

	acpi_status
	acpi_rs_memory24_stream(struct acpi_resource *linked_list,
	u8 ** output_buffer, acpi_size * bytes_consumed)
	{
	u8 buffer = output_buffer;
	u16 temp16 = 0;
	u8 temp8 = 0;

	ACPI_FUNCTION_TRACE("rs_memory24_stream");

	/* The descriptor field is static */

	*buffer = 0x81;
	buffer += 1;

	/* The length field is static */

	temp16 = 0x09;
	ACPI_MOVE_16_TO_16(buffer, &temp16);
	buffer += 2;

	/* Set the Information Byte */

	temp8 = (u8) (linked_list->data.memory24.read_write_attribute & 0x01);
	*buffer = temp8;
	buffer += 1;

	/* Set the Range minimum base address */

	ACPI_MOVE_32_TO_16(buffer,
	&linked_list->data.memory24.min_base_address);
	buffer += 2;

	/* Set the Range maximum base address */

	ACPI_MOVE_32_TO_16(buffer,
	&linked_list->data.memory24.max_base_address);
	buffer += 2;

	/* Set the base alignment */

	ACPI_MOVE_32_TO_16(buffer, &linked_list->data.memory24.alignment);
	buffer += 2;

	/* Set the range length */

	ACPI_MOVE_32_TO_16(buffer, &linked_list->data.memory24.range_length);
	buffer += 2;

	/* Return the number of bytes consumed in this operation */

	bytes_consumed = ACPI_PTR_DIFF(buffer, output_buffer);
	return_ACPI_STATUS(AE_OK);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_rs_memory32_range_resource
	*
	* PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
	* stream
	* bytes_consumed - Pointer to where the number of bytes
	* consumed the byte_stream_buffer is
	* returned
	* output_buffer - Pointer to the return data buffer
	* structure_size - Pointer to where the number of bytes
	* in the return data struct is returned
	*
	* RETURN: Status
	*
	* DESCRIPTION: Take the resource byte stream and fill out the appropriate
	* structure pointed to by the output_buffer. Return the
	* number of bytes consumed from the byte stream.
	*
	******************************************************************************/

	acpi_status
	acpi_rs_memory32_range_resource(u8 * byte_stream_buffer,
	acpi_size * bytes_consumed,
	u8 ** output_buffer, acpi_size * structure_size)
	{
	u8 *buffer = byte_stream_buffer;
	struct acpi_resource output_struct = (void )*output_buffer;
	u16 temp16 = 0;
	u8 temp8 = 0;
	acpi_size struct_size =
	ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem32);

	ACPI_FUNCTION_TRACE("rs_memory32_range_resource");

	/* Point past the Descriptor to get the number of bytes consumed */

	buffer += 1;

	ACPI_MOVE_16_TO_16(&temp16, buffer);
	buffer += 2;
	*bytes_consumed = (acpi_size) temp16 + 3;

	output_struct->id = ACPI_RSTYPE_MEM32;

	/*
	* Point to the place in the output buffer where the data portion will
	* begin.
	* 1. Set the RESOURCE_DATA * Data to point to its own address, then
	* 2. Set the pointer to the next address.
	*
	* NOTE: output_struct->Data is cast to u8, otherwise, this addition adds
	* 4 * sizeof(RESOURCE_DATA) instead of 4 * sizeof(u8)
	*/

	/* Check Byte 3 the Read/Write bit */

	temp8 = *buffer;
	buffer += 1;

	output_struct->data.memory32.read_write_attribute = temp8 & 0x01;

	/* Get min_base_address (Bytes 4-7) */

	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.min_base_address,
	buffer);
	buffer += 4;

	/* Get max_base_address (Bytes 8-11) */

	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.max_base_address,
	buffer);
	buffer += 4;

	/* Get Alignment (Bytes 12-15) */

	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.alignment, buffer);
	buffer += 4;

	/* Get range_length (Bytes 16-19) */

	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.range_length, buffer);

	/* Set the Length parameter */

	output_struct->length = (u32) struct_size;

	/* Return the final size of the structure */

	*structure_size = struct_size;
	return_ACPI_STATUS(AE_OK);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_rs_fixed_memory32_resource
	*
	* PARAMETERS: byte_stream_buffer - Pointer to the resource input byte
	* stream
	* bytes_consumed - Pointer to where the number of bytes
	* consumed the byte_stream_buffer is
	* returned
	* output_buffer - Pointer to the return data buffer
	* structure_size - Pointer to where the number of bytes
	* in the return data struct is returned
	*
	* RETURN: Status
	*
	* DESCRIPTION: Take the resource byte stream and fill out the appropriate
	* structure pointed to by the output_buffer. Return the
	* number of bytes consumed from the byte stream.
	*
	******************************************************************************/

	acpi_status
	acpi_rs_fixed_memory32_resource(u8 * byte_stream_buffer,
	acpi_size * bytes_consumed,
	u8 ** output_buffer, acpi_size * structure_size)
	{
	u8 *buffer = byte_stream_buffer;
	struct acpi_resource output_struct = (void )*output_buffer;
	u16 temp16 = 0;
	u8 temp8 = 0;
	acpi_size struct_size =
	ACPI_SIZEOF_RESOURCE(struct acpi_resource_fixed_mem32);

	ACPI_FUNCTION_TRACE("rs_fixed_memory32_resource");

	/* Point past the Descriptor to get the number of bytes consumed */

	buffer += 1;
	ACPI_MOVE_16_TO_16(&temp16, buffer);

	buffer += 2;
	*bytes_consumed = (acpi_size) temp16 + 3;

	output_struct->id = ACPI_RSTYPE_FIXED_MEM32;

	/* Check Byte 3 the Read/Write bit */

	temp8 = *buffer;
	buffer += 1;
	output_struct->data.fixed_memory32.read_write_attribute = temp8 & 0x01;

	/* Get range_base_address (Bytes 4-7) */

	ACPI_MOVE_32_TO_32(&output_struct->data.fixed_memory32.
	range_base_address, buffer);
	buffer += 4;

	/* Get range_length (Bytes 8-11) */

	ACPI_MOVE_32_TO_32(&output_struct->data.fixed_memory32.range_length,
	buffer);

	/* Set the Length parameter */

	output_struct->length = (u32) struct_size;

	/* Return the final size of the structure */

	*structure_size = struct_size;
	return_ACPI_STATUS(AE_OK);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_rs_memory32_range_stream
	*
	* PARAMETERS: linked_list - Pointer to the resource linked list
	* output_buffer - Pointer to the user's return buffer
	* bytes_consumed - Pointer to where the number of bytes
	* used in the output_buffer is returned
	*
	* RETURN: Status
	*
	* DESCRIPTION: Take the linked list resource structure and fills in the
	* the appropriate bytes in a byte stream
	*
	******************************************************************************/

	acpi_status
	acpi_rs_memory32_range_stream(struct acpi_resource *linked_list,
	u8 ** output_buffer, acpi_size * bytes_consumed)
	{
	u8 buffer = output_buffer;
	u16 temp16 = 0;
	u8 temp8 = 0;

	ACPI_FUNCTION_TRACE("rs_memory32_range_stream");

	/* The descriptor field is static */

	*buffer = 0x85;
	buffer += 1;

	/* The length field is static */

	temp16 = 0x11;

	ACPI_MOVE_16_TO_16(buffer, &temp16);
	buffer += 2;

	/* Set the Information Byte */

	temp8 = (u8) (linked_list->data.memory32.read_write_attribute & 0x01);
	*buffer = temp8;
	buffer += 1;

	/* Set the Range minimum base address */

	ACPI_MOVE_32_TO_32(buffer,
	&linked_list->data.memory32.min_base_address);
	buffer += 4;

	/* Set the Range maximum base address */

	ACPI_MOVE_32_TO_32(buffer,
	&linked_list->data.memory32.max_base_address);
	buffer += 4;

	/* Set the base alignment */

	ACPI_MOVE_32_TO_32(buffer, &linked_list->data.memory32.alignment);
	buffer += 4;

	/* Set the range length */

	ACPI_MOVE_32_TO_32(buffer, &linked_list->data.memory32.range_length);
	buffer += 4;

	/* Return the number of bytes consumed in this operation */

	bytes_consumed = ACPI_PTR_DIFF(buffer, output_buffer);
	return_ACPI_STATUS(AE_OK);
	}

	/*******************************************************************************
	*
	* FUNCTION: acpi_rs_fixed_memory32_stream
	*
	* PARAMETERS: linked_list - Pointer to the resource linked list
	* output_buffer - Pointer to the user's return buffer
	* bytes_consumed - Pointer to where the number of bytes
	* used in the output_buffer is returned
	*
	* RETURN: Status
	*
	* DESCRIPTION: Take the linked list resource structure and fills in the
	* the appropriate bytes in a byte stream
	*
	******************************************************************************/

	acpi_status
	acpi_rs_fixed_memory32_stream(struct acpi_resource *linked_list,
	u8 ** output_buffer, acpi_size * bytes_consumed)
	{
	u8 buffer = output_buffer;
	u16 temp16 = 0;
	u8 temp8 = 0;

	ACPI_FUNCTION_TRACE("rs_fixed_memory32_stream");

	/* The descriptor field is static */

	*buffer = 0x86;
	buffer += 1;

	/* The length field is static */

	temp16 = 0x09;

	ACPI_MOVE_16_TO_16(buffer, &temp16);
	buffer += 2;

	/* Set the Information Byte */

	temp8 =
	(u8) (linked_list->data.fixed_memory32.read_write_attribute & 0x01);
	*buffer = temp8;
	buffer += 1;

	/* Set the Range base address */

	ACPI_MOVE_32_TO_32(buffer,
	&linked_list->data.fixed_memory32.
	range_base_address);
	buffer += 4;

	/* Set the range length */

	ACPI_MOVE_32_TO_32(buffer,
	&linked_list->data.fixed_memory32.range_length);
	buffer += 4;

	/* Return the number of bytes consumed in this operation */

	bytes_consumed = ACPI_PTR_DIFF(buffer, output_buffer);
	return_ACPI_STATUS(AE_OK);
	}