| /* |
| * LM4857 AMP driver |
| * |
| * Copyright 2007 Wolfson Microelectronics PLC. |
| * Author: Graeme Gregory |
| * graeme.gregory@wolfsonmicro.com |
| * Copyright 2011 Lars-Peter Clausen <lars@metafoo.de> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| |
| #include <sound/core.h> |
| #include <sound/soc.h> |
| #include <sound/tlv.h> |
| |
| struct lm4857 { |
| struct i2c_client *i2c; |
| uint8_t mode; |
| }; |
| |
| static const uint8_t lm4857_default_regs[] = { |
| 0x00, 0x00, 0x00, 0x00, |
| }; |
| |
| /* The register offsets in the cache array */ |
| #define LM4857_MVOL 0 |
| #define LM4857_LVOL 1 |
| #define LM4857_RVOL 2 |
| #define LM4857_CTRL 3 |
| |
| /* the shifts required to set these bits */ |
| #define LM4857_3D 5 |
| #define LM4857_WAKEUP 5 |
| #define LM4857_EPGAIN 4 |
| |
| static int lm4857_write(struct snd_soc_codec *codec, unsigned int reg, |
| unsigned int value) |
| { |
| uint8_t data; |
| int ret; |
| |
| ret = snd_soc_cache_write(codec, reg, value); |
| if (ret < 0) |
| return ret; |
| |
| data = (reg << 6) | value; |
| ret = i2c_master_send(codec->control_data, &data, 1); |
| if (ret != 1) { |
| dev_err(codec->dev, "Failed to write register: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int lm4857_read(struct snd_soc_codec *codec, |
| unsigned int reg) |
| { |
| unsigned int val; |
| int ret; |
| |
| ret = snd_soc_cache_read(codec, reg, &val); |
| if (ret) |
| return -1; |
| |
| return val; |
| } |
| |
| static int lm4857_get_mode(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec); |
| |
| ucontrol->value.integer.value[0] = lm4857->mode; |
| |
| return 0; |
| } |
| |
| static int lm4857_set_mode(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); |
| struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec); |
| uint8_t value = ucontrol->value.integer.value[0]; |
| |
| lm4857->mode = value; |
| |
| if (codec->dapm.bias_level == SND_SOC_BIAS_ON) |
| snd_soc_update_bits(codec, LM4857_CTRL, 0x0F, value + 6); |
| |
| return 1; |
| } |
| |
| static int lm4857_set_bias_level(struct snd_soc_codec *codec, |
| enum snd_soc_bias_level level) |
| { |
| struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec); |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| snd_soc_update_bits(codec, LM4857_CTRL, 0x0F, lm4857->mode + 6); |
| break; |
| case SND_SOC_BIAS_STANDBY: |
| snd_soc_update_bits(codec, LM4857_CTRL, 0x0F, 0); |
| break; |
| default: |
| break; |
| } |
| |
| codec->dapm.bias_level = level; |
| |
| return 0; |
| } |
| |
| static const char *lm4857_mode[] = { |
| "Earpiece", |
| "Loudspeaker", |
| "Loudspeaker + Headphone", |
| "Headphone", |
| }; |
| |
| static const struct soc_enum lm4857_mode_enum = |
| SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode); |
| |
| static const struct snd_soc_dapm_widget lm4857_dapm_widgets[] = { |
| SND_SOC_DAPM_INPUT("IN"), |
| |
| SND_SOC_DAPM_OUTPUT("LS"), |
| SND_SOC_DAPM_OUTPUT("HP"), |
| SND_SOC_DAPM_OUTPUT("EP"), |
| }; |
| |
| static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0); |
| static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0); |
| |
| static const struct snd_kcontrol_new lm4857_controls[] = { |
| SOC_SINGLE_TLV("Left Playback Volume", LM4857_LVOL, 0, 31, 0, |
| stereo_tlv), |
| SOC_SINGLE_TLV("Right Playback Volume", LM4857_RVOL, 0, 31, 0, |
| stereo_tlv), |
| SOC_SINGLE_TLV("Mono Playback Volume", LM4857_MVOL, 0, 31, 0, |
| mono_tlv), |
| SOC_SINGLE("Spk 3D Playback Switch", LM4857_LVOL, LM4857_3D, 1, 0), |
| SOC_SINGLE("HP 3D Playback Switch", LM4857_RVOL, LM4857_3D, 1, 0), |
| SOC_SINGLE("Fast Wakeup Playback Switch", LM4857_CTRL, |
| LM4857_WAKEUP, 1, 0), |
| SOC_SINGLE("Earpiece 6dB Playback Switch", LM4857_CTRL, |
| LM4857_EPGAIN, 1, 0), |
| |
| SOC_ENUM_EXT("Mode", lm4857_mode_enum, |
| lm4857_get_mode, lm4857_set_mode), |
| }; |
| |
| /* There is a demux between the input signal and the output signals. |
| * Currently there is no easy way to model it in ASoC and since it does not make |
| * much of a difference in practice simply connect the input direclty to the |
| * outputs. */ |
| static const struct snd_soc_dapm_route lm4857_routes[] = { |
| {"LS", NULL, "IN"}, |
| {"HP", NULL, "IN"}, |
| {"EP", NULL, "IN"}, |
| }; |
| |
| static int lm4857_probe(struct snd_soc_codec *codec) |
| { |
| struct lm4857 *lm4857 = snd_soc_codec_get_drvdata(codec); |
| struct snd_soc_dapm_context *dapm = &codec->dapm; |
| int ret; |
| |
| codec->control_data = lm4857->i2c; |
| |
| ret = snd_soc_add_codec_controls(codec, lm4857_controls, |
| ARRAY_SIZE(lm4857_controls)); |
| if (ret) |
| return ret; |
| |
| ret = snd_soc_dapm_new_controls(dapm, lm4857_dapm_widgets, |
| ARRAY_SIZE(lm4857_dapm_widgets)); |
| if (ret) |
| return ret; |
| |
| ret = snd_soc_dapm_add_routes(dapm, lm4857_routes, |
| ARRAY_SIZE(lm4857_routes)); |
| if (ret) |
| return ret; |
| |
| snd_soc_dapm_new_widgets(dapm); |
| |
| return 0; |
| } |
| |
| static struct snd_soc_codec_driver soc_codec_dev_lm4857 = { |
| .write = lm4857_write, |
| .read = lm4857_read, |
| .probe = lm4857_probe, |
| .reg_cache_size = ARRAY_SIZE(lm4857_default_regs), |
| .reg_word_size = sizeof(uint8_t), |
| .reg_cache_default = lm4857_default_regs, |
| .set_bias_level = lm4857_set_bias_level, |
| }; |
| |
| static int lm4857_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct lm4857 *lm4857; |
| int ret; |
| |
| lm4857 = devm_kzalloc(&i2c->dev, sizeof(*lm4857), GFP_KERNEL); |
| if (!lm4857) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(i2c, lm4857); |
| |
| lm4857->i2c = i2c; |
| |
| ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_lm4857, NULL, 0); |
| |
| return ret; |
| } |
| |
| static int lm4857_i2c_remove(struct i2c_client *i2c) |
| { |
| snd_soc_unregister_codec(&i2c->dev); |
| return 0; |
| } |
| |
| static const struct i2c_device_id lm4857_i2c_id[] = { |
| { "lm4857", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lm4857_i2c_id); |
| |
| static struct i2c_driver lm4857_i2c_driver = { |
| .driver = { |
| .name = "lm4857", |
| .owner = THIS_MODULE, |
| }, |
| .probe = lm4857_i2c_probe, |
| .remove = lm4857_i2c_remove, |
| .id_table = lm4857_i2c_id, |
| }; |
| |
| module_i2c_driver(lm4857_i2c_driver); |
| |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); |
| MODULE_DESCRIPTION("LM4857 amplifier driver"); |
| MODULE_LICENSE("GPL"); |